Umzug von Bullseye auf Trixie, Probleme mit Backup
-
Das influx-Repo fehlt. Dafür ist da sonstiges 'obskures' Zeug in den Quellen.
Kam das durch das deinstallieren der 2.x und dem neuen installieren der 1.12?
Für mongodb gibt es z. B. eine Quelle für Trixie. Warum knallst du da den Ubuntu-Kram rein?
ich habe wissentlich nichts reingeknallt.
Kam das durch das deinstallieren der 2.x und dem neuen installieren der 1.12?
Ich weiß ja nicht was du da genau warum wie gemacht hast. Jedenfalls ist da keine ordentlliche Quelle für influxdb vorhanden. Wo auch immer du dann 1.12 her haben willst.
ich habe wissentlich nichts reingeknallt.
Ist mir klar, denn wenn Wissen vorhanden wäre, dann hätte dir das selber auffallen müssen. Schmeiß das jedenfalls raus und definiere die Quelle richtig für dein Debian Trixie.
-
Kam das durch das deinstallieren der 2.x und dem neuen installieren der 1.12?
Ich weiß ja nicht was du da genau warum wie gemacht hast. Jedenfalls ist da keine ordentlliche Quelle für influxdb vorhanden. Wo auch immer du dann 1.12 her haben willst.
ich habe wissentlich nichts reingeknallt.
Ist mir klar, denn wenn Wissen vorhanden wäre, dann hätte dir das selber auffallen müssen. Schmeiß das jedenfalls raus und definiere die Quelle richtig für dein Debian Trixie.
Ich weiß ja nicht was du da genau warum wie gemacht hast. Jedenfalls ist da keine ordentlliche Quelle für influxdb vorhanden. Wo auch immer du dann 1.12 her haben willst.
Die Quelle ist von da: https://docs.influxdata.com/influxdb/v1/introduction/install/
Ist mir klar, denn wenn Wissen vorhanden wäre, dann hätte dir das selber auffallen müssen. Schmeiß das jedenfalls raus und definiere die Quelle richtig für dein Debian Trixie.
Würde ich sofort machen wenn ich wüsste wie?
-
Ich weiß ja nicht was du da genau warum wie gemacht hast. Jedenfalls ist da keine ordentlliche Quelle für influxdb vorhanden. Wo auch immer du dann 1.12 her haben willst.
Die Quelle ist von da: https://docs.influxdata.com/influxdb/v1/introduction/install/
Ist mir klar, denn wenn Wissen vorhanden wäre, dann hätte dir das selber auffallen müssen. Schmeiß das jedenfalls raus und definiere die Quelle richtig für dein Debian Trixie.
Würde ich sofort machen wenn ich wüsste wie?
Und warum hast du nicht den Weg genommen, den ich dir oben gesagt habe?
Für influxdb also:
curl --silent --location -O https://repos.influxdata.com/influxdata-archive.key gpg --show-keys --with-fingerprint --with-colons ./influxdata-archive.key 2>&1 \ | grep -q '^fpr:\+24C975CBA61A024EE1B631787C3D57159FC2F927:$' \ && cat influxdata-archive.key \ | gpg --dearmor \ | sudo tee /usr/share/keyrings/influxdata-archive.gpg > /dev/null \ && echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive.gpg] https://repos.influxdata.com/debian stable main' \ | sudo tee /etc/apt/sources.list.d/influxdata.list sudo apt-get updateMongodb:
Schau dir an, wie die Quelldatei heißt und lösch die:
ls -lA /etc/apt/sources.list.d/ sudo rm /etc/apt/sources.list.d/NAMEDERMONGO.listRichtige Quell-Datei anlegen:
curl -fsSL https://pgp.mongodb.com/server-8.0.asc | \ sudo gpg -o /usr/share/keyrings/mongodb-server-8.0.gpg \ --dearmor echo "deb [ signed-by=/usr/share/keyrings/mongodb-server-8.0.gpg ] https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 main" | sudo tee /etc/apt/sources.list.d/mongodb-org-8.0.list -
Und warum hast du nicht den Weg genommen, den ich dir oben gesagt habe?
Für influxdb also:
curl --silent --location -O https://repos.influxdata.com/influxdata-archive.key gpg --show-keys --with-fingerprint --with-colons ./influxdata-archive.key 2>&1 \ | grep -q '^fpr:\+24C975CBA61A024EE1B631787C3D57159FC2F927:$' \ && cat influxdata-archive.key \ | gpg --dearmor \ | sudo tee /usr/share/keyrings/influxdata-archive.gpg > /dev/null \ && echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive.gpg] https://repos.influxdata.com/debian stable main' \ | sudo tee /etc/apt/sources.list.d/influxdata.list sudo apt-get updateMongodb:
Schau dir an, wie die Quelldatei heißt und lösch die:
ls -lA /etc/apt/sources.list.d/ sudo rm /etc/apt/sources.list.d/NAMEDERMONGO.listRichtige Quell-Datei anlegen:
curl -fsSL https://pgp.mongodb.com/server-8.0.asc | \ sudo gpg -o /usr/share/keyrings/mongodb-server-8.0.gpg \ --dearmor echo "deb [ signed-by=/usr/share/keyrings/mongodb-server-8.0.gpg ] https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 main" | sudo tee /etc/apt/sources.list.d/mongodb-org-8.0.listUnd warum hast du nicht den Weg genommen, den ich dir oben gesagt habe?
Als ich es kopiert habe habe ich die Befehle einzelnd eingegeben. Das hat nicht so funktioniert.
da habe ich noch ein bissche rumgesucht und bin über die Info gestoßen.Ich habe jetz aber einfach nochmal von dir alles kopiert und eingeben (Es kann ja nicht viel passieren, hab ja das Image).
pi@Raspberry:~ $ curl --silent --location -O https://repos.influxdata.com/influxdata-archive.key gpg --show-keys --with-fingerprint --with-colons ./influxdata-archive.key 2>&1 \ | grep -q '^fpr:\+24C975CBA61A024EE1B631787C3D57159FC2F927:$' \ && cat influxdata-archive.key \ | gpg --dearmor \ | sudo tee /usr/share/keyrings/influxdata-archive.gpg > /dev/null \ && echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive.gpg] https://repos.influxdata.com/debian stable main' \ | sudo tee /etc/apt/sources.list.d/influxdata.list sudo apt-get update [sudo] password for pi: deb [signed-by=/usr/share/keyrings/influxdata-archive.gpg] https://repos.influxdata.com/debian stable main Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://apt.grafana.com stable InRelease Get:4 https://repos.influxdata.com/debian stable InRelease [6,922 B] Hit:5 https://deb.debian.org/debian trixie InRelease Hit:6 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:7 https://apt.glennr.nl/repo trixie InRelease Get:8 https://repos.influxdata.com/debian stable/main armhf Packages [10.6 kB] Get:9 https://repos.influxdata.com/debian stable/main arm64 Packages [27.9 kB] Hit:10 https://repo.mongodb.org/apt/ubuntu noble/mongodb-org/8.0 InRelease Get:11 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 52.9 kB in 1s (88.2 kB/s) Reading package lists... DoneSchau dir an, wie die Quelldatei heißt und lösch die:
Da ist leider keine mongo.list
pi@Raspberry:~ $ ls -lA /etc/apt/sources.list.d/ total 40 -rw-r--r-- 1 root root 388 Jun 19 12:21 debian.sources -rw-r--r-- 1 root root 144 Jun 19 12:21 glennr-install-script.sources -rw-r--r-- 1 root root 162 Jun 19 12:21 glennr-mongod-8.0.sources -rw-r--r-- 1 root root 146 Jun 19 12:24 glennr-packages-adoptium.sources -rw-r--r-- 1 root root 82 Jun 19 13:11 grafana.list -rw-r--r-- 1 root root 107 Jun 27 13:07 influxdata.list -rw-r--r-- 1 root root 780 Jan 9 18:55 influxdata.list.ucf-dist -rw-r--r-- 1 root root 0 Jun 19 13:41 influxdb.list -rw-r--r-- 1 root root 179 Jun 19 12:22 mongodb-org-8.0.sources -rw-r--r-- 1 root root 155 Jun 27 10:53 nodesource.sources -rw-r--r-- 1 root root 151 Apr 21 02:05 raspi.sourcesEs tut mir echt Leid, das du dich so mit mir rumschlagen musst
-
Und warum hast du nicht den Weg genommen, den ich dir oben gesagt habe?
Als ich es kopiert habe habe ich die Befehle einzelnd eingegeben. Das hat nicht so funktioniert.
da habe ich noch ein bissche rumgesucht und bin über die Info gestoßen.Ich habe jetz aber einfach nochmal von dir alles kopiert und eingeben (Es kann ja nicht viel passieren, hab ja das Image).
pi@Raspberry:~ $ curl --silent --location -O https://repos.influxdata.com/influxdata-archive.key gpg --show-keys --with-fingerprint --with-colons ./influxdata-archive.key 2>&1 \ | grep -q '^fpr:\+24C975CBA61A024EE1B631787C3D57159FC2F927:$' \ && cat influxdata-archive.key \ | gpg --dearmor \ | sudo tee /usr/share/keyrings/influxdata-archive.gpg > /dev/null \ && echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive.gpg] https://repos.influxdata.com/debian stable main' \ | sudo tee /etc/apt/sources.list.d/influxdata.list sudo apt-get update [sudo] password for pi: deb [signed-by=/usr/share/keyrings/influxdata-archive.gpg] https://repos.influxdata.com/debian stable main Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://apt.grafana.com stable InRelease Get:4 https://repos.influxdata.com/debian stable InRelease [6,922 B] Hit:5 https://deb.debian.org/debian trixie InRelease Hit:6 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:7 https://apt.glennr.nl/repo trixie InRelease Get:8 https://repos.influxdata.com/debian stable/main armhf Packages [10.6 kB] Get:9 https://repos.influxdata.com/debian stable/main arm64 Packages [27.9 kB] Hit:10 https://repo.mongodb.org/apt/ubuntu noble/mongodb-org/8.0 InRelease Get:11 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 52.9 kB in 1s (88.2 kB/s) Reading package lists... DoneSchau dir an, wie die Quelldatei heißt und lösch die:
Da ist leider keine mongo.list
pi@Raspberry:~ $ ls -lA /etc/apt/sources.list.d/ total 40 -rw-r--r-- 1 root root 388 Jun 19 12:21 debian.sources -rw-r--r-- 1 root root 144 Jun 19 12:21 glennr-install-script.sources -rw-r--r-- 1 root root 162 Jun 19 12:21 glennr-mongod-8.0.sources -rw-r--r-- 1 root root 146 Jun 19 12:24 glennr-packages-adoptium.sources -rw-r--r-- 1 root root 82 Jun 19 13:11 grafana.list -rw-r--r-- 1 root root 107 Jun 27 13:07 influxdata.list -rw-r--r-- 1 root root 780 Jan 9 18:55 influxdata.list.ucf-dist -rw-r--r-- 1 root root 0 Jun 19 13:41 influxdb.list -rw-r--r-- 1 root root 179 Jun 19 12:22 mongodb-org-8.0.sources -rw-r--r-- 1 root root 155 Jun 27 10:53 nodesource.sources -rw-r--r-- 1 root root 151 Apr 21 02:05 raspi.sourcesEs tut mir echt Leid, das du dich so mit mir rumschlagen musst
-
Hab die Datei gelöscht und die neue Quelle angelegt
Neuer Diag
========== Start marking the full check here =========== ```bash Script v.2026-06-06 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: Raspberry Icon name: computer Kernel: Linux 6.18.34+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Unknown Kernel : aarch64 Userland : 64bit System was installed 67 days ago (on 2026-04-21). Systemuptime and Load: 13:43:19 up 16 min, 2 users, load average: 0.58, 0.84, 0.96 CPU threads : 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred *** TIME AND TIMEZONES *** Local time: Sat 2026-06-27 13:43:19 CEST Universal time: Sat 2026-06-27 11:43:19 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 3.0G 337M 7.0M 704M 952M Swap: 2.1G 27M 2.1G Total: 6.1G 3.1G 2.5G Active iob-Instances: 12 3795 M total memory 2887 M used memory 992 M active memory 2299 M inactive memory 321 M free memory 41 M buffer memory 631 M swap cache 2047 M total swap 26 M used swap 2021 M free swap *** top - Table Of Processes *** top - 13:43:20 up 16 min, 2 users, load average: 0.58, 0.84, 0.96 Tasks: 187 total, 1 running, 186 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3795.8 total, 319.7 free, 2888.6 used, 672.5 buff/cache MiB Swap: 2048.0 total, 2021.8 free, 26.2 used. 907.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 760M 9.1M 751M 2% /run /dev/mmcblk0p2 ext4 28G 11G 16G 42% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald .service tmpfs tmpfs 1.9G 432K 1.9G 1% /tmp /dev/mmcblk0p1 vfat 505M 66M 439M 14% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.servi ce tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@tty S0.service tmpfs tmpfs 380M 8.0K 380M 1% /run/user/1000 Messages concerning filesystems in dmesg: [Sat Jun 27 13:26:25 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Sat Jun 27 13:26:25 2026] EXT4-fs (mmcblk0p2): mounted filesystem e634e0a4-a958 -46cb-abad-862d2102573f ro with ordered data mode. Quota mode: none. [Sat Jun 27 13:26:28 2026] EXT4-fs (mmcblk0p2): re-mounted e634e0a4-a958-46cb-ab ad-862d2102573f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepag e=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 4.3G /var/ 1.5G /var/lib 873M /var/lib/influxdb 835M /var/lib/influxdb/data 814M /var/lib/influxdb/data/iobroker/autogen Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 1013M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 159M /opt/iobroker/iobroker-data/ 116M /opt/iobroker/iobroker-data/files 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 46M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/objects.jsonl 12M /opt/iobroker/iobroker-data/states.jsonl 7.5M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BeQV_TGa.j s 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescrip t/tsWorker.js 3.7M /opt/iobroker/iobroker-data/files/javascript.admin/custom/assets/index-C npybLRW.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.23.1 /usr/bin/node v22.23.1 /usr/bin/npm 10.9.8 /usr/bin/npx 10.9.8 ✓ Node.js installation is correct nodejs: Installed: 22.23.1-1nodesource1 Candidate: 22.23.1-1nodesource1 Version table: *** 22.23.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.23.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.3-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Pac kages 500 https://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: No known Vulnerabilities detected! *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspberry Raspberry (version: 7.2.2, hostname: Raspberry , alive, uptime: 1018) Core adapters versions js-controller: 7.2.2 admin: 7.8.23 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspberry - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.alexa2.0 : alexa2 : Raspberry - enabled + system.adapter.backitup.0 : backitup : Raspberry - enabled + system.adapter.discovery.0 : discovery : Raspberry - enabled + system.adapter.influxdb.0 : influxdb : Raspberry - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Raspberry - enabled system.adapter.netatmo-crawler.0 : netatmo-crawler : Raspberry - enabled + system.adapter.pvforecast.0 : pvforecast : Raspberry - enabled + system.adapter.senec.0 : senec : Raspberry - enabled + system.adapter.tuya.0 : tuya : Raspberry - enabled + system.adapter.unifi.0 : unifi : Raspberry - enabled system.adapter.vis.0 : vis : Raspberry - enabled + system.adapter.web.0 : web : Raspberry - enabled, port: 8082, bind: 0.0.0.0, run as: admi n + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspberry - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.influxdb.0 : influxdb : Raspberry - enabled, port: 8086 + system.adapter.web.0 : web : Raspberry - enabled, port: 8082, bind: 0.0.0.0, run as: admi n ioBroker-Repositories ┌─────────────────────────────────────────────────────────────────────────────── ─────────────── │ (index) │ name │ url │ auto upgrade │ ├─────────────────────────────────────────────────────────────────────────────── ─────────────── │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────────────────────────────────────────────────────────────────────────── ─────────────── Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ id │ name │ version │ upgrade policy │ ├─────────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.8.23' │ 'none' │ │ 1 │ 'system.adapter.alexa2' │ 'alexa2' │ '3.27.4' │ 'none' │ │ 2 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.17' │ 'none' │ │ 3 │ 'system.adapter.daswetter' │ 'daswetter' │ '3.1.10' │ 'none' │ │ 4 │ 'system.adapter.discovery' │ 'discovery' │ '5.0.0' │ 'none' │ │ 5 │ 'system.adapter.dwd' │ 'dwd' │ '2.8.5' │ 'none' │ │ 6 │ 'system.adapter.influxdb' │ 'influxdb' │ '4.0.2' │ 'none' │ │ 7 │ 'system.adapter.javascript' │ 'javascript' │ '9.0.18' │ 'none' │ │ 8 │ 'system.adapter.netatmo-crawler' │ 'netatmo-crawler' │ '1.2.0' │ 'none' │ │ 9 │ 'system.adapter.pvforecast' │ 'pvforecast' │ '6.1.0' │ 'none' │ │ 10 │ 'system.adapter.senec' │ 'senec' │ '2.5.3' │ 'none' │ │ 11 │ 'system.adapter.simple-api' │ 'simple-api' │ '3.0.7' │ 'none' │ │ 12 │ 'system.adapter.socketio' │ 'socketio' │ '7.1.3' │ 'none' │ │ 13 │ 'system.adapter.tuya' │ 'tuya' │ '3.17.0' │ 'none' │ │ 14 │ 'system.adapter.unifi' │ 'unifi' │ '0.7.0' │ 'none' │ │ 15 │ 'system.adapter.vis' │ 'vis' │ '1.5.6' │ 'none' │ │ 16 │ 'system.adapter.vis-timeandweather' │ 'vis-timeandweather' │ '1.2.2' │ 'none' │ │ 17 │ 'system.adapter.weatherunderground' │ 'weatherunderground' │ '3.7.0' │ 'none' │ │ 18 │ 'system.adapter.web' │ 'web' │ '8.0.0' │ 'none' │ │ 19 │ 'system.adapter.ws' │ 'ws' │ '4.1.0' │ 'none' │ └─────────────────────────────────────────────────────────────────────────────────────────────────── ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.8.23 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "backitup" : 3.3.17 , installed 3.3.17 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.2.2 , installed 7.2.2 Adapter "netatmo-crawler": 1.2.0 , installed 1.2.0 Adapter "pvforecast" : 6.1.0 , installed 6.1.0 Adapter "senec" : 2.5.3 , installed 2.5.3 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.1.0 , installed 4.1.0 Objects and States Please stand by - This may take a while Objects: 10806 States: 8790 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://apt.glennr.nl/repo trixie InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:5 https://deb.debian.org/debian trixie InRelease Hit:6 https://apt.grafana.com stable InRelease Get:7 https://repos.influxdata.com/debian stable InRelease [6922 B] Hit:8 https://packages.adoptium.net/artifactory/deb trixie InRelease Hit:9 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Fetched 6922 B in 5s (1529 B/s) Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=554,fd=5),("systemd",pid=1,fd=77)) udp UNCONN 0 0 0.0.0.0:6666 0.0.0.0:* users:(("io.tuya.0",pid=1596,fd=45)) udp UNCONN 0 0 0.0.0.0:6667 0.0.0.0:* users:(("io.tuya.0",pid=1596,fd=46)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=611,fd=12)) udp UNCONN 0 0 0.0.0.0:55273 0.0.0.0:* users:(("avahi-daemon",pid=611,fd=14)) udp UNCONN 0 0 *:sunrpc *:* users:(("rpcbind",pid=554,fd=7),("systemd",pid=1,fd=79)) udp UNCONN 0 0 [::ffff:192.168.0.20]:56250 *:* users:(("java",pid=1157,fd=207)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=611,fd=13)) udp UNCONN 0 0 *:5514 *:* users:(("java",pid=1157,fd=204)) udp UNCONN 0 0 *:3478 *:* users:(("java",pid=1157,fd=180)) udp UNCONN 0 0 *:10001 *:* users:(("java",pid=1157,fd=208)) udp UNCONN 0 0 *:51178 *:* users:(("avahi-daemon",pid=611,fd=15)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=1091,fd=23)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=1091,fd=29)) tcp LISTEN 0 4096 127.0.0.1:27117 0.0.0.0:* users:(("mongod",pid=1241,fd=9)) tcp LISTEN 0 4096 127.0.0.1:omniorb 0.0.0.0:* users:(("influxd",pid=1090,fd=3)) tcp LISTEN 0 511 0.0.0.0:41713 0.0.0.0:* users:(("io.alexa2.0",pid=1573,fd=37)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=1122,fd=6)) tcp LISTEN 0 4096 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=554,fd=4),("systemd",pid=1,fd=76)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=1731,fd=34)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=1499,fd=36)) tcp LISTEN 0 200 *:http-alt *:* users:(("java",pid=1157,fd=163)) tcp LISTEN 0 4096 *:8086 *:* users:(("influxd",pid=1090,fd=199)) tcp LISTEN 0 1000 *:28082 *:* users:(("java",pid=1157,fd=179)) tcp LISTEN 0 4096 *:3000 *:* users:(("grafana",pid=1198,fd=26)) tcp LISTEN 0 1000 *:8843 *:* users:(("java",pid=1157,fd=190)) tcp LISTEN 0 50 *:6789 *:* users:(("java",pid=1157,fd=203)) tcp LISTEN 0 1000 *:8880 *:* users:(("java",pid=1157,fd=174)) tcp LISTEN 0 1000 *:8443 *:* users:(("java",pid=1157,fd=183)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=1122,fd=7)) tcp LISTEN 0 4096 [::]:sunrpc [::]:* users:(("rpcbind",pid=554,fd=6),("systemd",pid=1,fd=78)) *** Log File - Last 25 Lines *** 2026-06-27 13:44:47.546 - warn: javascript.0 (1554) at processImmediate (node:internal/timers:452:9) 2026-06-27 13:44:47.546 - warn: javascript.0 (1554) at process.callbackTrampoline (node:internal/async_hooks:130:17) 2026-06-27 13:44:47.546 - info: javascript.0 (1554) script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung: Einspeisung addiert. Neue Summe: 5427.11 Wh 2026-06-27 13:44:47.556 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Einspeisung_Wh" has to be type "number" but received type "string" 2026-06-27 13:44:47.597 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Einspeisung_kWh" has to be type "number" but received type "string" 2026-06-27 13:44:58.123 - info: javascript.0 (1554) script.js.common.Senec.Hausverbrauch: Aktuelle Leistung: 860.99 W, Zeitdiff: 10.68 s, Berechnete Energie: 2.56 Wh 2026-06-27 13:44:58.134 - info: javascript.0 (1554) script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung: Aktuelle Leistung: -5769.22 W, Zeitdiff: 10.68 s, Berechnete Energie: -17.12 Wh 2026-06-27 13:44:58.137 - warn: javascript.0 (1554) You are assigning a string to the state "0_userdata.0.Energie.Senec.Tages_Hausverbrauch_Wh" which expects a number. Please fix your code to use a number or change the state type to string. This warning might become an error in future versions. 2026-06-27 13:44:58.140 - warn: javascript.0 (1554) at setState (/opt/iobroker/node_modules/iobroker.javascript/src/lib/sandbox.ts:2661:20) 2026-06-27 13:44:58.141 - warn: javascript.0 (1554) at Object.<anonymous> (script.js.common.Senec.Hausverbrauch:111:5) 2026-06-27 13:44:58.141 - warn: javascript.0 (1554) You are assigning a string to the state "0_userdata.0.Energie.Senec.Tages_Hausverbrauch_kWh" which expects a number. Please fix your code to use a number or change the state type to string. This warning might become an error in future versions. 2026-06-27 13:44:58.143 - warn: javascript.0 (1554) at setState (/opt/iobroker/node_modules/iobroker.javascript/src/lib/sandbox.ts:2661:20) 2026-06-27 13:44:58.143 - warn: javascript.0 (1554) at Object.<anonymous> (script.js.common.Senec.Hausverbrauch:112:5) 2026-06-27 13:44:58.144 - info: javascript.0 (1554) script.js.common.Senec.Hausverbrauch: Hausverbrauch addiert. Neue Summe: 7883.92 Wh (7.884 kWh) 2026-06-27 13:44:58.155 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Hausverbrauch_Wh" has to be type "number" but received type "string" 2026-06-27 13:44:58.160 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Hausverbrauch_kWh" has to be type "number" but received type "string" 2026-06-27 13:44:58.209 - warn: javascript.0 (1554) You are assigning a string to the state "0_userdata.0.Energie.Senec.Tages_Einspeisung_Wh" which expects a number. Please fix your code to use a number or change the state type to string. This warning might become an error in future versions. 2026-06-27 13:44:58.210 - warn: javascript.0 (1554) at setState (/opt/iobroker/node_modules/iobroker.javascript/src/lib/sandbox.ts:2661:20) 2026-06-27 13:44:58.210 - warn: javascript.0 (1554) at Object.<anonymous> (script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung:123:9) 2026-06-27 13:44:58.211 - warn: javascript.0 (1554) You are assigning a string to the state "0_userdata.0.Energie.Senec.Tages_Einspeisung_kWh" which expects a number. Please fix your code to use a number or change the state type to string. This warning might become an error in future versions. 2026-06-27 13:44:58.211 - warn: javascript.0 (1554) at setState (/opt/iobroker/node_modules/iobroker.javascript/src/lib/sandbox.ts:2661:20) 2026-06-27 13:44:58.212 - warn: javascript.0 (1554) at Object.<anonymous> (script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung:124:9) 2026-06-27 13:44:58.212 - info: javascript.0 (1554) script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung: Einspeisung addiert. Neue Summe: 5444.23 Wh 2026-06-27 13:44:58.217 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Einspeisung_Wh" has to be type "number" but received type "string" 2026-06-27 13:44:58.257 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Einspeisung_kWh" has to be type "number" but received type "string"============= Mark until here for C&P =============
iob diag has finished.
pi@Raspberry:~ $
-
Hab die Datei gelöscht und die neue Quelle angelegt
Neuer Diag
========== Start marking the full check here =========== ```bash Script v.2026-06-06 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: Raspberry Icon name: computer Kernel: Linux 6.18.34+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Unknown Kernel : aarch64 Userland : 64bit System was installed 67 days ago (on 2026-04-21). Systemuptime and Load: 13:43:19 up 16 min, 2 users, load average: 0.58, 0.84, 0.96 CPU threads : 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: ~ Under-voltage has occurred *** TIME AND TIMEZONES *** Local time: Sat 2026-06-27 13:43:19 CEST Universal time: Sat 2026-06-27 11:43:19 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 3.0G 337M 7.0M 704M 952M Swap: 2.1G 27M 2.1G Total: 6.1G 3.1G 2.5G Active iob-Instances: 12 3795 M total memory 2887 M used memory 992 M active memory 2299 M inactive memory 321 M free memory 41 M buffer memory 631 M swap cache 2047 M total swap 26 M used swap 2021 M free swap *** top - Table Of Processes *** top - 13:43:20 up 16 min, 2 users, load average: 0.58, 0.84, 0.96 Tasks: 187 total, 1 running, 186 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3795.8 total, 319.7 free, 2888.6 used, 672.5 buff/cache MiB Swap: 2048.0 total, 2021.8 free, 26.2 used. 907.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 760M 9.1M 751M 2% /run /dev/mmcblk0p2 ext4 28G 11G 16G 42% / tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald .service tmpfs tmpfs 1.9G 432K 1.9G 1% /tmp /dev/mmcblk0p1 vfat 505M 66M 439M 14% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.servi ce tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@tty S0.service tmpfs tmpfs 380M 8.0K 380M 1% /run/user/1000 Messages concerning filesystems in dmesg: [Sat Jun 27 13:26:25 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs [Sat Jun 27 13:26:25 2026] EXT4-fs (mmcblk0p2): mounted filesystem e634e0a4-a958 -46cb-abad-862d2102573f ro with ordered data mode. Quota mode: none. [Sat Jun 27 13:26:28 2026] EXT4-fs (mmcblk0p2): re-mounted e634e0a4-a958-46cb-ab ad-862d2102573f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepag e=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 4.3G /var/ 1.5G /var/lib 873M /var/lib/influxdb 835M /var/lib/influxdb/data 814M /var/lib/influxdb/data/iobroker/autogen Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 1013M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 159M /opt/iobroker/iobroker-data/ 116M /opt/iobroker/iobroker-data/files 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 46M /opt/iobroker/iobroker-data/files/admin.admin/custom The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/objects.jsonl 12M /opt/iobroker/iobroker-data/states.jsonl 7.5M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BeQV_TGa.j s 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescrip t/tsWorker.js 3.7M /opt/iobroker/iobroker-data/files/javascript.admin/custom/assets/index-C npybLRW.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' No nvbackup.json found. *** NodeJS-Installation *** /usr/bin/nodejs v22.23.1 /usr/bin/node v22.23.1 /usr/bin/npm 10.9.8 /usr/bin/npx 10.9.8 ✓ Node.js installation is correct nodejs: Installed: 22.23.1-1nodesource1 Candidate: 22.23.1-1nodesource1 Version table: *** 22.23.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.23.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.3-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Pac kages 500 https://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: No known Vulnerabilities detected! *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: Raspberry Raspberry (version: 7.2.2, hostname: Raspberry , alive, uptime: 1018) Core adapters versions js-controller: 7.2.2 admin: 7.8.23 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : Raspberry - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.alexa2.0 : alexa2 : Raspberry - enabled + system.adapter.backitup.0 : backitup : Raspberry - enabled + system.adapter.discovery.0 : discovery : Raspberry - enabled + system.adapter.influxdb.0 : influxdb : Raspberry - enabled, port: 8086 + system.adapter.javascript.0 : javascript : Raspberry - enabled system.adapter.netatmo-crawler.0 : netatmo-crawler : Raspberry - enabled + system.adapter.pvforecast.0 : pvforecast : Raspberry - enabled + system.adapter.senec.0 : senec : Raspberry - enabled + system.adapter.tuya.0 : tuya : Raspberry - enabled + system.adapter.unifi.0 : unifi : Raspberry - enabled system.adapter.vis.0 : vis : Raspberry - enabled + system.adapter.web.0 : web : Raspberry - enabled, port: 8082, bind: 0.0.0.0, run as: admi n + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Raspberry - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.influxdb.0 : influxdb : Raspberry - enabled, port: 8086 + system.adapter.web.0 : web : Raspberry - enabled, port: 8082, bind: 0.0.0.0, run as: admi n ioBroker-Repositories ┌─────────────────────────────────────────────────────────────────────────────── ─────────────── │ (index) │ name │ url │ auto upgrade │ ├─────────────────────────────────────────────────────────────────────────────── ─────────────── │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────────────────────────────────────────────────────────────────────────── ─────────────── Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters ┌─────────────────────────────────────────────────────────────────────────────────────────────────── │ (index) │ id │ name │ version │ upgrade policy │ ├─────────────────────────────────────────────────────────────────────────────────────────────────── │ 0 │ 'system.adapter.admin' │ 'admin' │ '7.8.23' │ 'none' │ │ 1 │ 'system.adapter.alexa2' │ 'alexa2' │ '3.27.4' │ 'none' │ │ 2 │ 'system.adapter.backitup' │ 'backitup' │ '3.3.17' │ 'none' │ │ 3 │ 'system.adapter.daswetter' │ 'daswetter' │ '3.1.10' │ 'none' │ │ 4 │ 'system.adapter.discovery' │ 'discovery' │ '5.0.0' │ 'none' │ │ 5 │ 'system.adapter.dwd' │ 'dwd' │ '2.8.5' │ 'none' │ │ 6 │ 'system.adapter.influxdb' │ 'influxdb' │ '4.0.2' │ 'none' │ │ 7 │ 'system.adapter.javascript' │ 'javascript' │ '9.0.18' │ 'none' │ │ 8 │ 'system.adapter.netatmo-crawler' │ 'netatmo-crawler' │ '1.2.0' │ 'none' │ │ 9 │ 'system.adapter.pvforecast' │ 'pvforecast' │ '6.1.0' │ 'none' │ │ 10 │ 'system.adapter.senec' │ 'senec' │ '2.5.3' │ 'none' │ │ 11 │ 'system.adapter.simple-api' │ 'simple-api' │ '3.0.7' │ 'none' │ │ 12 │ 'system.adapter.socketio' │ 'socketio' │ '7.1.3' │ 'none' │ │ 13 │ 'system.adapter.tuya' │ 'tuya' │ '3.17.0' │ 'none' │ │ 14 │ 'system.adapter.unifi' │ 'unifi' │ '0.7.0' │ 'none' │ │ 15 │ 'system.adapter.vis' │ 'vis' │ '1.5.6' │ 'none' │ │ 16 │ 'system.adapter.vis-timeandweather' │ 'vis-timeandweather' │ '1.2.2' │ 'none' │ │ 17 │ 'system.adapter.weatherunderground' │ 'weatherunderground' │ '3.7.0' │ 'none' │ │ 18 │ 'system.adapter.web' │ 'web' │ '8.0.0' │ 'none' │ │ 19 │ 'system.adapter.ws' │ 'ws' │ '4.1.0' │ 'none' │ └─────────────────────────────────────────────────────────────────────────────────────────────────── ioBroker-Adapter Versions and update status Used repository: stable Adapter "admin" : 7.8.23 , installed 7.8.23 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "backitup" : 3.3.17 , installed 3.3.17 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.2.2 , installed 7.2.2 Adapter "netatmo-crawler": 1.2.0 , installed 1.2.0 Adapter "pvforecast" : 6.1.0 , installed 6.1.0 Adapter "senec" : 2.5.3 , installed 2.5.3 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.1.0 , installed 4.1.0 Objects and States Please stand by - This may take a while Objects: 10806 States: 8790 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://apt.glennr.nl/repo trixie InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:5 https://deb.debian.org/debian trixie InRelease Hit:6 https://apt.grafana.com stable InRelease Get:7 https://repos.influxdata.com/debian stable InRelease [6922 B] Hit:8 https://packages.adoptium.net/artifactory/deb trixie InRelease Hit:9 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Fetched 6922 B in 5s (1529 B/s) Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess udp UNCONN 0 0 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=554,fd=5),("systemd",pid=1,fd=77)) udp UNCONN 0 0 0.0.0.0:6666 0.0.0.0:* users:(("io.tuya.0",pid=1596,fd=45)) udp UNCONN 0 0 0.0.0.0:6667 0.0.0.0:* users:(("io.tuya.0",pid=1596,fd=46)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("avahi-daemon",pid=611,fd=12)) udp UNCONN 0 0 0.0.0.0:55273 0.0.0.0:* users:(("avahi-daemon",pid=611,fd=14)) udp UNCONN 0 0 *:sunrpc *:* users:(("rpcbind",pid=554,fd=7),("systemd",pid=1,fd=79)) udp UNCONN 0 0 [::ffff:192.168.0.20]:56250 *:* users:(("java",pid=1157,fd=207)) udp UNCONN 0 0 *:mdns *:* users:(("avahi-daemon",pid=611,fd=13)) udp UNCONN 0 0 *:5514 *:* users:(("java",pid=1157,fd=204)) udp UNCONN 0 0 *:3478 *:* users:(("java",pid=1157,fd=180)) udp UNCONN 0 0 *:10001 *:* users:(("java",pid=1157,fd=208)) udp UNCONN 0 0 *:51178 *:* users:(("avahi-daemon",pid=611,fd=15)) tcp LISTEN 0 511 127.0.0.1:9001 0.0.0.0:* users:(("iobroker.js-con",pid=1091,fd=23)) tcp LISTEN 0 511 127.0.0.1:9000 0.0.0.0:* users:(("iobroker.js-con",pid=1091,fd=29)) tcp LISTEN 0 4096 127.0.0.1:27117 0.0.0.0:* users:(("mongod",pid=1241,fd=9)) tcp LISTEN 0 4096 127.0.0.1:omniorb 0.0.0.0:* users:(("influxd",pid=1090,fd=3)) tcp LISTEN 0 511 0.0.0.0:41713 0.0.0.0:* users:(("io.alexa2.0",pid=1573,fd=37)) tcp LISTEN 0 128 0.0.0.0:ssh 0.0.0.0:* users:(("sshd",pid=1122,fd=6)) tcp LISTEN 0 4096 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=554,fd=4),("systemd",pid=1,fd=76)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=1731,fd=34)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=1499,fd=36)) tcp LISTEN 0 200 *:http-alt *:* users:(("java",pid=1157,fd=163)) tcp LISTEN 0 4096 *:8086 *:* users:(("influxd",pid=1090,fd=199)) tcp LISTEN 0 1000 *:28082 *:* users:(("java",pid=1157,fd=179)) tcp LISTEN 0 4096 *:3000 *:* users:(("grafana",pid=1198,fd=26)) tcp LISTEN 0 1000 *:8843 *:* users:(("java",pid=1157,fd=190)) tcp LISTEN 0 50 *:6789 *:* users:(("java",pid=1157,fd=203)) tcp LISTEN 0 1000 *:8880 *:* users:(("java",pid=1157,fd=174)) tcp LISTEN 0 1000 *:8443 *:* users:(("java",pid=1157,fd=183)) tcp LISTEN 0 128 [::]:ssh [::]:* users:(("sshd",pid=1122,fd=7)) tcp LISTEN 0 4096 [::]:sunrpc [::]:* users:(("rpcbind",pid=554,fd=6),("systemd",pid=1,fd=78)) *** Log File - Last 25 Lines *** 2026-06-27 13:44:47.546 - warn: javascript.0 (1554) at processImmediate (node:internal/timers:452:9) 2026-06-27 13:44:47.546 - warn: javascript.0 (1554) at process.callbackTrampoline (node:internal/async_hooks:130:17) 2026-06-27 13:44:47.546 - info: javascript.0 (1554) script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung: Einspeisung addiert. Neue Summe: 5427.11 Wh 2026-06-27 13:44:47.556 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Einspeisung_Wh" has to be type "number" but received type "string" 2026-06-27 13:44:47.597 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Einspeisung_kWh" has to be type "number" but received type "string" 2026-06-27 13:44:58.123 - info: javascript.0 (1554) script.js.common.Senec.Hausverbrauch: Aktuelle Leistung: 860.99 W, Zeitdiff: 10.68 s, Berechnete Energie: 2.56 Wh 2026-06-27 13:44:58.134 - info: javascript.0 (1554) script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung: Aktuelle Leistung: -5769.22 W, Zeitdiff: 10.68 s, Berechnete Energie: -17.12 Wh 2026-06-27 13:44:58.137 - warn: javascript.0 (1554) You are assigning a string to the state "0_userdata.0.Energie.Senec.Tages_Hausverbrauch_Wh" which expects a number. Please fix your code to use a number or change the state type to string. This warning might become an error in future versions. 2026-06-27 13:44:58.140 - warn: javascript.0 (1554) at setState (/opt/iobroker/node_modules/iobroker.javascript/src/lib/sandbox.ts:2661:20) 2026-06-27 13:44:58.141 - warn: javascript.0 (1554) at Object.<anonymous> (script.js.common.Senec.Hausverbrauch:111:5) 2026-06-27 13:44:58.141 - warn: javascript.0 (1554) You are assigning a string to the state "0_userdata.0.Energie.Senec.Tages_Hausverbrauch_kWh" which expects a number. Please fix your code to use a number or change the state type to string. This warning might become an error in future versions. 2026-06-27 13:44:58.143 - warn: javascript.0 (1554) at setState (/opt/iobroker/node_modules/iobroker.javascript/src/lib/sandbox.ts:2661:20) 2026-06-27 13:44:58.143 - warn: javascript.0 (1554) at Object.<anonymous> (script.js.common.Senec.Hausverbrauch:112:5) 2026-06-27 13:44:58.144 - info: javascript.0 (1554) script.js.common.Senec.Hausverbrauch: Hausverbrauch addiert. Neue Summe: 7883.92 Wh (7.884 kWh) 2026-06-27 13:44:58.155 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Hausverbrauch_Wh" has to be type "number" but received type "string" 2026-06-27 13:44:58.160 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Hausverbrauch_kWh" has to be type "number" but received type "string" 2026-06-27 13:44:58.209 - warn: javascript.0 (1554) You are assigning a string to the state "0_userdata.0.Energie.Senec.Tages_Einspeisung_Wh" which expects a number. Please fix your code to use a number or change the state type to string. This warning might become an error in future versions. 2026-06-27 13:44:58.210 - warn: javascript.0 (1554) at setState (/opt/iobroker/node_modules/iobroker.javascript/src/lib/sandbox.ts:2661:20) 2026-06-27 13:44:58.210 - warn: javascript.0 (1554) at Object.<anonymous> (script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung:123:9) 2026-06-27 13:44:58.211 - warn: javascript.0 (1554) You are assigning a string to the state "0_userdata.0.Energie.Senec.Tages_Einspeisung_kWh" which expects a number. Please fix your code to use a number or change the state type to string. This warning might become an error in future versions. 2026-06-27 13:44:58.211 - warn: javascript.0 (1554) at setState (/opt/iobroker/node_modules/iobroker.javascript/src/lib/sandbox.ts:2661:20) 2026-06-27 13:44:58.212 - warn: javascript.0 (1554) at Object.<anonymous> (script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung:124:9) 2026-06-27 13:44:58.212 - info: javascript.0 (1554) script.js.common.Senec.Grid_Power_Bezug_und_Einspeisung: Einspeisung addiert. Neue Summe: 5444.23 Wh 2026-06-27 13:44:58.217 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Einspeisung_Wh" has to be type "number" but received type "string" 2026-06-27 13:44:58.257 - info: javascript.0 (1554) State value to set for "0_userdata.0.Energie.Senec.Tages_Einspeisung_kWh" has to be type "number" but received type "string"============= Mark until here for C&P =============
iob diag has finished.
pi@Raspberry:~ $
-
pi@Raspberry:~ $ apt policy mongodb apt policy influxdb mongodb: Installed: (none) Candidate: (none) Version table: influxdb: Installed: 1.6.7~rc0-2+b12 Candidate: 1.12.4-1 Version table: 1.12.4-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-4 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-3 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.8-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.8-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.7-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.8.10-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages *** 1.6.7~rc0-2+b12 500 lines 1-23...skipping... influxdb: Installed: 1.6.7~rc0-2+b12 Candidate: 1.12.4-1 Version table: 1.12.4-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-4 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-3 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.8-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.8-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.7-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.8.10-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages *** 1.6.7~rc0-2+b12 500 500 https://deb.debian.org/debian trixie/main arm64 Packages 100 /var/lib/dpkg/status ~ ~mongodb nicht installiert?
-
pi@Raspberry:~ $ apt policy mongodb apt policy influxdb mongodb: Installed: (none) Candidate: (none) Version table: influxdb: Installed: 1.6.7~rc0-2+b12 Candidate: 1.12.4-1 Version table: 1.12.4-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-4 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-3 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.8-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.8-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.7-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.8.10-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages *** 1.6.7~rc0-2+b12 500 lines 1-23...skipping... influxdb: Installed: 1.6.7~rc0-2+b12 Candidate: 1.12.4-1 Version table: 1.12.4-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.3-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-4 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-3 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.12.2-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.8-2 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.8-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.11.7-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages 1.8.10-1 500 500 https://repos.influxdata.com/debian stable/main arm64 Packages *** 1.6.7~rc0-2+b12 500 500 https://deb.debian.org/debian trixie/main arm64 Packages 100 /var/lib/dpkg/status ~ ~mongodb nicht installiert?
-
pi@Raspberry:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-orgpi@Raspberry:~ $ sudo apt update sudo apt full-upgrade [sudo] password for pi: Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 https://deb.debian.org/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:6 https://apt.glennr.nl/repo trixie InRelease Get:7 https://repos.influxdata.com/debian stable InRelease [6,922 B] Hit:8 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Get:9 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 14.4 kB in 1s (23.3 kB/s) 1 package can be upgraded. Run 'apt list --upgradable' to see it. Notice: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease' doesn't support architecture 'armhf' The following packages were automatically installed and are no longer required: gyp libjs-is-typedarray libjs-sprintf-js libcares2 libjs-prettify libjs-typedarray-to-buffer libjs-events libjs-regenerate libssl-dev libjs-inherits libjs-source-map libuv1-dev Use 'sudo apt autoremove' to remove them. Upgrading: influxdb Installing dependencies: influxdata-archive-keyring Summary: Upgrading: 1, Installing: 1, Removing: 0, Not Upgrading: 0 Download size: 37.4 MB / 37.4 MB Space needed: 106 MB / 16.5 GB available Continue? [Y/n] y Get:1 https://repos.influxdata.com/debian stable/main arm64 influxdb arm64 1.12.4-1 [37.4 MB] Fetched 37.4 MB in 14s (2,703 kB/s) Reading changelogs... Done Selecting previously unselected package influxdata-archive-keyring. (Reading database ... 126586 files and directories currently installed.) Preparing to unpack .../influxdata-archive-keyring_2026.01.09_all.deb ... Unpacking influxdata-archive-keyring (2026.01.09) ... Preparing to unpack .../influxdb_1.12.4-1_arm64.deb ... Unpacking influxdb (1.12.4-1) over (1.6.7~rc0-2+b12) ... Setting up influxdb (1.12.4-1) ... Installing new version of config file /etc/influxdb/influxdb.conf ... Synchronizing state of influxdb.service with SysV service script with /usr/lib/systemd/systemd-sysv-install. Executing: /usr/lib/systemd/systemd-sysv-install enable influxdb Setting up influxdata-archive-keyring (2026.01.09) ... Processing triggers for man-db (2.13.1-1) ... -
pi@Raspberry:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-orgpi@Raspberry:~ $ sudo apt update sudo apt full-upgrade [sudo] password for pi: Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 https://deb.debian.org/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Hit:6 https://apt.glennr.nl/repo trixie InRelease Get:7 https://repos.influxdata.com/debian stable InRelease [6,922 B] Hit:8 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Get:9 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 14.4 kB in 1s (23.3 kB/s) 1 package can be upgraded. Run 'apt list --upgradable' to see it. Notice: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease' doesn't support architecture 'armhf' The following packages were automatically installed and are no longer required: gyp libjs-is-typedarray libjs-sprintf-js libcares2 libjs-prettify libjs-typedarray-to-buffer libjs-events libjs-regenerate libssl-dev libjs-inherits libjs-source-map libuv1-dev Use 'sudo apt autoremove' to remove them. Upgrading: influxdb Installing dependencies: influxdata-archive-keyring Summary: Upgrading: 1, Installing: 1, Removing: 0, Not Upgrading: 0 Download size: 37.4 MB / 37.4 MB Space needed: 106 MB / 16.5 GB available Continue? [Y/n] y Get:1 https://repos.influxdata.com/debian stable/main arm64 influxdb arm64 1.12.4-1 [37.4 MB] Fetched 37.4 MB in 14s (2,703 kB/s) Reading changelogs... Done Selecting previously unselected package influxdata-archive-keyring. (Reading database ... 126586 files and directories currently installed.) Preparing to unpack .../influxdata-archive-keyring_2026.01.09_all.deb ... Unpacking influxdata-archive-keyring (2026.01.09) ... Preparing to unpack .../influxdb_1.12.4-1_arm64.deb ... Unpacking influxdb (1.12.4-1) over (1.6.7~rc0-2+b12) ... Setting up influxdb (1.12.4-1) ... Installing new version of config file /etc/influxdb/influxdb.conf ... Synchronizing state of influxdb.service with SysV service script with /usr/lib/systemd/systemd-sysv-install. Executing: /usr/lib/systemd/systemd-sysv-install enable influxdb Setting up influxdata-archive-keyring (2026.01.09) ... Processing triggers for man-db (2.13.1-1) ... -
i@Raspberry:~ $ sudo apt autoremove [sudo] password for pi: REMOVING: gyp libjs-is-typedarray libjs-sprintf-js libcares2 libjs-prettify libjs-typedarray-to-buffer libjs-events libjs-regenerate libssl-dev libjs-inherits libjs-source-map libuv1-dev Summary: Upgrading: 0, Installing: 0, Removing: 12, Not Upgrading: 0 Freed space: 19.9 MB Continue? [Y/n] y (Reading database ... 126612 files and directories currently installed.) Removing gyp (0.16.2-2) ... Removing libcares2:arm64 (1.34.5-1+deb13u1) ... Removing libjs-events (3.3.0+~3.0.0-3) ... Removing libjs-inherits (2.0.4-6) ... Removing libjs-is-typedarray (1.0.0-4) ... Removing libjs-prettify (2015.12.04+dfsg-1.1) ... Removing libjs-regenerate (1.4.2-3) ... Removing libjs-source-map (0.7.0++dfsg2+really.0.6.1-15) ... Removing libjs-sprintf-js (1.1.2+ds1+~1.1.2-1) ... Removing libjs-typedarray-to-buffer (4.0.0-2) ... Removing libssl-dev:arm64 (3.5.6-1~deb13u2+rpt1) ... Removing libuv1-dev:arm64 (1.50.0-2) ... Processing triggers for man-db (2.13.1-1) ... Processing triggers for libc-bin (2.41-12+rpt1+deb13u3) ... pi@Raspberry:~ $ sudo apt update sudo apt full-upgrade Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 https://deb.debian.org/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Get:6 https://repos.influxdata.com/debian stable InRelease [6,922 B] Hit:7 https://apt.glennr.nl/repo trixie InRelease Hit:8 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Get:9 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 14.4 kB in 1s (24.2 kB/s) All packages are up to date. Notice: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease' doesn't support architecture 'armhf' Summary: Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0 pi@Raspberry:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-org -
i@Raspberry:~ $ sudo apt autoremove [sudo] password for pi: REMOVING: gyp libjs-is-typedarray libjs-sprintf-js libcares2 libjs-prettify libjs-typedarray-to-buffer libjs-events libjs-regenerate libssl-dev libjs-inherits libjs-source-map libuv1-dev Summary: Upgrading: 0, Installing: 0, Removing: 12, Not Upgrading: 0 Freed space: 19.9 MB Continue? [Y/n] y (Reading database ... 126612 files and directories currently installed.) Removing gyp (0.16.2-2) ... Removing libcares2:arm64 (1.34.5-1+deb13u1) ... Removing libjs-events (3.3.0+~3.0.0-3) ... Removing libjs-inherits (2.0.4-6) ... Removing libjs-is-typedarray (1.0.0-4) ... Removing libjs-prettify (2015.12.04+dfsg-1.1) ... Removing libjs-regenerate (1.4.2-3) ... Removing libjs-source-map (0.7.0++dfsg2+really.0.6.1-15) ... Removing libjs-sprintf-js (1.1.2+ds1+~1.1.2-1) ... Removing libjs-typedarray-to-buffer (4.0.0-2) ... Removing libssl-dev:arm64 (3.5.6-1~deb13u2+rpt1) ... Removing libuv1-dev:arm64 (1.50.0-2) ... Processing triggers for man-db (2.13.1-1) ... Processing triggers for libc-bin (2.41-12+rpt1+deb13u3) ... pi@Raspberry:~ $ sudo apt update sudo apt full-upgrade Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://apt.grafana.com stable InRelease Hit:4 https://deb.debian.org/debian trixie InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Get:6 https://repos.influxdata.com/debian stable InRelease [6,922 B] Hit:7 https://apt.glennr.nl/repo trixie InRelease Hit:8 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Get:9 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 14.4 kB in 1s (24.2 kB/s) All packages are up to date. Notice: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease' doesn't support architecture 'armhf' Summary: Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0 pi@Raspberry:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-orgDas mongodb-Repo scheint im Moment nicht richtig befüllt zu sein.
Denn laut deren eigener Anleitung muss da ein Paket namensmongodb-orgvorhanden sein, isses aber nicht:thomas@testpi:~ $ apt policy mongodb mongodb: Installed: (none) Candidate: (none) Version table: thomas@testpi:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-org thomas@testpi:~ $Keine Ahnung was da warum wie lange (noch) klemmt.
BTW: Die Meldung
Notice: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease' doesn't support architecture 'armhf'
kannst du abstellen, indem du die Datei /etc/apt/sources.list.d/mongodb-org-8.0.list so anpasst:deb [ arch=arm64 signed-by=/usr/share/keyrings/mongodb-server-8.0.gpg ] https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 main -
Das mongodb-Repo scheint im Moment nicht richtig befüllt zu sein.
Denn laut deren eigener Anleitung muss da ein Paket namensmongodb-orgvorhanden sein, isses aber nicht:thomas@testpi:~ $ apt policy mongodb mongodb: Installed: (none) Candidate: (none) Version table: thomas@testpi:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-org thomas@testpi:~ $Keine Ahnung was da warum wie lange (noch) klemmt.
BTW: Die Meldung
Notice: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease' doesn't support architecture 'armhf'
kannst du abstellen, indem du die Datei /etc/apt/sources.list.d/mongodb-org-8.0.list so anpasst:deb [ arch=arm64 signed-by=/usr/share/keyrings/mongodb-server-8.0.gpg ] https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 mainKeine Ahnung was da warum wie lange (noch) klemmt.
Ah, wie ich sehe ist das auch so bei dir auf deinem Testpi
pi@Raspberry:~ $ deb [ arch=arm64 signed-by=/usr/share/keyrings/mongodb-server-8 .0.gpg ] https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 main -bash: deb: command not found pi@Raspberry:~ $ deb[ arch=arm64 signed-by=/usr/share/keyrings/mongodb-server-8. 0.gpg ] https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 main -bash: deb[ arch=arm64 signed-by=/usr/share/keyrings/mongodb-server-8.0.gpg ]: N o such file or directoryAlso beim genau kopieren kam, command not found
Habe in meiner Ahnungslosigkeit das Leerzeichen nach deb entfernt.
Dann kam Meldung das Datei nicht gefunden.
Die datei ist aber da:pi@Raspberry:~ $ ls -lA /usr/share/keyrings total 240 lrwxrwxrwx 1 root root 37 Apr 10 2025 debian-archive-bookworm-automatic.gpg -> debian-archive-bookworm-automat ic.pgp -rw-r--r-- 1 root root 8700 Apr 10 2025 debian-archive-bookworm-automatic.pgp lrwxrwxrwx 1 root root 46 Apr 10 2025 debian-archive-bookworm-security-automatic.gpg -> debian-archive-bookwor m-security-automatic.pgp -rw-r--r-- 1 root root 8709 Apr 10 2025 debian-archive-bookworm-security-automatic.pgp lrwxrwxrwx 1 root root 34 Apr 10 2025 debian-archive-bookworm-stable.gpg -> debian-archive-bookworm-stable.pgp -rw-r--r-- 1 root root 280 Apr 10 2025 debian-archive-bookworm-stable.pgp lrwxrwxrwx 1 root root 37 Apr 10 2025 debian-archive-bullseye-automatic.gpg -> debian-archive-bullseye-automat ic.pgp -rw-r--r-- 1 root root 8700 Apr 10 2025 debian-archive-bullseye-automatic.pgp lrwxrwxrwx 1 root root 46 Apr 10 2025 debian-archive-bullseye-security-automatic.gpg -> debian-archive-bullsey e-security-automatic.pgp -rw-r--r-- 1 root root 8709 Apr 10 2025 debian-archive-bullseye-security-automatic.pgp lrwxrwxrwx 1 root root 34 Apr 10 2025 debian-archive-bullseye-stable.gpg -> debian-archive-bullseye-stable.pgp -rw-r--r-- 1 root root 2453 Apr 10 2025 debian-archive-bullseye-stable.pgp lrwxrwxrwx 1 root root 26 Apr 10 2025 debian-archive-keyring.gpg -> debian-archive-keyring.pgp -rw-r--r-- 1 root root 55918 Apr 10 2025 debian-archive-keyring.pgp lrwxrwxrwx 1 root root 31 Apr 10 2025 debian-archive-removed-keys.gpg -> debian-archive-removed-keys.pgp -rw-r--r-- 1 root root 72636 Apr 10 2025 debian-archive-removed-keys.pgp lrwxrwxrwx 1 root root 35 Apr 10 2025 debian-archive-trixie-automatic.gpg -> debian-archive-trixie-automatic.p gp -rw-r--r-- 1 root root 8698 Apr 10 2025 debian-archive-trixie-automatic.pgp lrwxrwxrwx 1 root root 44 Apr 10 2025 debian-archive-trixie-security-automatic.gpg -> debian-archive-trixie-se curity-automatic.pgp -rw-r--r-- 1 root root 8707 Apr 10 2025 debian-archive-trixie-security-automatic.pgp lrwxrwxrwx 1 root root 32 Apr 10 2025 debian-archive-trixie-stable.gpg -> debian-archive-trixie-stable.pgp -rw-r--r-- 1 root root 962 Apr 10 2025 debian-archive-trixie-stable.pgp -rw-r--r-- 1 root root 2370 Jan 9 18:55 influxdata-archive_compat.gpg -rw-r--r-- 1 root root 4516 Jan 9 18:55 influxdata-archive.gpg -rw-r--r-- 1 root root 1178 Jun 27 13:40 mongodb-server-8.0.gpg -rw-r--r-- 1 root root 1207 Jun 27 10:53 nodesource.gpg lrwxrwxrwx 1 root root 33 Jun 6 2025 raspberrypi-archive-automatic.gpg -> raspberrypi-archive-automatic.pgp -rw-r--r-- 1 root root 1229 Jun 6 2025 raspberrypi-archive-automatic.pgp lrwxrwxrwx 1 root root 31 Jun 6 2025 raspberrypi-archive-keyring.gpg -> raspberrypi-archive-keyring.pgp -rw-r--r-- 1 root root 1229 Jun 6 2025 raspberrypi-archive-keyring.pgp -
Keine Ahnung was da warum wie lange (noch) klemmt.
Ah, wie ich sehe ist das auch so bei dir auf deinem Testpi
pi@Raspberry:~ $ deb [ arch=arm64 signed-by=/usr/share/keyrings/mongodb-server-8 .0.gpg ] https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 main -bash: deb: command not found pi@Raspberry:~ $ deb[ arch=arm64 signed-by=/usr/share/keyrings/mongodb-server-8. 0.gpg ] https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 main -bash: deb[ arch=arm64 signed-by=/usr/share/keyrings/mongodb-server-8.0.gpg ]: N o such file or directoryAlso beim genau kopieren kam, command not found
Habe in meiner Ahnungslosigkeit das Leerzeichen nach deb entfernt.
Dann kam Meldung das Datei nicht gefunden.
Die datei ist aber da:pi@Raspberry:~ $ ls -lA /usr/share/keyrings total 240 lrwxrwxrwx 1 root root 37 Apr 10 2025 debian-archive-bookworm-automatic.gpg -> debian-archive-bookworm-automat ic.pgp -rw-r--r-- 1 root root 8700 Apr 10 2025 debian-archive-bookworm-automatic.pgp lrwxrwxrwx 1 root root 46 Apr 10 2025 debian-archive-bookworm-security-automatic.gpg -> debian-archive-bookwor m-security-automatic.pgp -rw-r--r-- 1 root root 8709 Apr 10 2025 debian-archive-bookworm-security-automatic.pgp lrwxrwxrwx 1 root root 34 Apr 10 2025 debian-archive-bookworm-stable.gpg -> debian-archive-bookworm-stable.pgp -rw-r--r-- 1 root root 280 Apr 10 2025 debian-archive-bookworm-stable.pgp lrwxrwxrwx 1 root root 37 Apr 10 2025 debian-archive-bullseye-automatic.gpg -> debian-archive-bullseye-automat ic.pgp -rw-r--r-- 1 root root 8700 Apr 10 2025 debian-archive-bullseye-automatic.pgp lrwxrwxrwx 1 root root 46 Apr 10 2025 debian-archive-bullseye-security-automatic.gpg -> debian-archive-bullsey e-security-automatic.pgp -rw-r--r-- 1 root root 8709 Apr 10 2025 debian-archive-bullseye-security-automatic.pgp lrwxrwxrwx 1 root root 34 Apr 10 2025 debian-archive-bullseye-stable.gpg -> debian-archive-bullseye-stable.pgp -rw-r--r-- 1 root root 2453 Apr 10 2025 debian-archive-bullseye-stable.pgp lrwxrwxrwx 1 root root 26 Apr 10 2025 debian-archive-keyring.gpg -> debian-archive-keyring.pgp -rw-r--r-- 1 root root 55918 Apr 10 2025 debian-archive-keyring.pgp lrwxrwxrwx 1 root root 31 Apr 10 2025 debian-archive-removed-keys.gpg -> debian-archive-removed-keys.pgp -rw-r--r-- 1 root root 72636 Apr 10 2025 debian-archive-removed-keys.pgp lrwxrwxrwx 1 root root 35 Apr 10 2025 debian-archive-trixie-automatic.gpg -> debian-archive-trixie-automatic.p gp -rw-r--r-- 1 root root 8698 Apr 10 2025 debian-archive-trixie-automatic.pgp lrwxrwxrwx 1 root root 44 Apr 10 2025 debian-archive-trixie-security-automatic.gpg -> debian-archive-trixie-se curity-automatic.pgp -rw-r--r-- 1 root root 8707 Apr 10 2025 debian-archive-trixie-security-automatic.pgp lrwxrwxrwx 1 root root 32 Apr 10 2025 debian-archive-trixie-stable.gpg -> debian-archive-trixie-stable.pgp -rw-r--r-- 1 root root 962 Apr 10 2025 debian-archive-trixie-stable.pgp -rw-r--r-- 1 root root 2370 Jan 9 18:55 influxdata-archive_compat.gpg -rw-r--r-- 1 root root 4516 Jan 9 18:55 influxdata-archive.gpg -rw-r--r-- 1 root root 1178 Jun 27 13:40 mongodb-server-8.0.gpg -rw-r--r-- 1 root root 1207 Jun 27 10:53 nodesource.gpg lrwxrwxrwx 1 root root 33 Jun 6 2025 raspberrypi-archive-automatic.gpg -> raspberrypi-archive-automatic.pgp -rw-r--r-- 1 root root 1229 Jun 6 2025 raspberrypi-archive-automatic.pgp lrwxrwxrwx 1 root root 31 Jun 6 2025 raspberrypi-archive-keyring.gpg -> raspberrypi-archive-keyring.pgp -rw-r--r-- 1 root root 1229 Jun 6 2025 raspberrypi-archive-keyring.pgpAlso beim genau kopieren kam, command not found
Das ist der Eintrag in der Datei
/etc/apt/sources.list.d/mongodb-org-8.0.listDiese musst du mit deinem bevorzugten Editor bearbeiten. Ich verwende meist nano dafür. Also per
sudo nano /etc/apt/sources.list.d/mongodb-org-8.0.listanpassen. Speichern mit Strg-O, nano verlassen mit Strg-X.
-
Done
pi@Raspberry:~ $ sudo apt update sudo apt full-upgrade Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://deb.debian.org/debian trixie InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Get:6 https://apt.glennr.nl/repo trixie InRelease [28.2 kB] Get:7 https://repos.influxdata.com/debian stable InRelease [6,922 B] Get:8 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages [4,735 B] Hit:9 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Get:10 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 47.4 kB in 1s (57.9 kB/s) 1 package can be upgraded. Run 'apt list --upgradable' to see it. Upgrading: mongod-armv8 Summary: Upgrading: 1, Installing: 0, Removing: 0, Not Upgrading: 0 Download size: 23.5 MB Space needed: 0 B / 16.4 GB available Continue? [Y/n] y Get:1 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 mongod-armv8 arm64 8.0.26 [23.5 MB] Fetched 23.5 MB in 8s (2,871 kB/s) Reading changelogs... Done (Reading database ... 126267 files and directories currently installed.) Preparing to unpack .../mongod-armv8_8.0.26_arm64.deb ... Unpacking mongod-armv8 (8.0.26) over (8.0.23) ... Setting up mongod-armv8 (8.0.26) ... pi@Raspberry:~ $ apt policy mongodb mongodb: Installed: (none) Candidate: (none) Version table: pi@Raspberry:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-org -
Done
pi@Raspberry:~ $ sudo apt update sudo apt full-upgrade Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://deb.debian.org/debian trixie InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Get:6 https://apt.glennr.nl/repo trixie InRelease [28.2 kB] Get:7 https://repos.influxdata.com/debian stable InRelease [6,922 B] Get:8 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages [4,735 B] Hit:9 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Get:10 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 47.4 kB in 1s (57.9 kB/s) 1 package can be upgraded. Run 'apt list --upgradable' to see it. Upgrading: mongod-armv8 Summary: Upgrading: 1, Installing: 0, Removing: 0, Not Upgrading: 0 Download size: 23.5 MB Space needed: 0 B / 16.4 GB available Continue? [Y/n] y Get:1 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 mongod-armv8 arm64 8.0.26 [23.5 MB] Fetched 23.5 MB in 8s (2,871 kB/s) Reading changelogs... Done (Reading database ... 126267 files and directories currently installed.) Preparing to unpack .../mongod-armv8_8.0.26_arm64.deb ... Unpacking mongod-armv8 (8.0.26) over (8.0.23) ... Setting up mongod-armv8 (8.0.26) ... pi@Raspberry:~ $ apt policy mongodb mongodb: Installed: (none) Candidate: (none) Version table: pi@Raspberry:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-orgmongod-armv8
Wo kommt denn das her? Finde ich auf meinem Test-System nicht.
apt policy mongod-armv8mal anschauen.
BTW: Dir fehlt auch das trixie-updates Repo aus irgendeinem Grund.
Edit: Also aus diesem Repo kommt das:
https://apt.glennr.nl/repo trixie InRelease
Was beziehst du eigentlich von da? -
Done
pi@Raspberry:~ $ sudo apt update sudo apt full-upgrade Hit:1 http://deb.debian.org/debian-security trixie-security InRelease Hit:2 http://archive.raspberrypi.com/debian trixie InRelease Hit:3 https://deb.debian.org/debian trixie InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Get:6 https://apt.glennr.nl/repo trixie InRelease [28.2 kB] Get:7 https://repos.influxdata.com/debian stable InRelease [6,922 B] Get:8 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages [4,735 B] Hit:9 https://repo.mongodb.org/apt/debian trixie/mongodb-org/8.0 InRelease Get:10 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B] Fetched 47.4 kB in 1s (57.9 kB/s) 1 package can be upgraded. Run 'apt list --upgradable' to see it. Upgrading: mongod-armv8 Summary: Upgrading: 1, Installing: 0, Removing: 0, Not Upgrading: 0 Download size: 23.5 MB Space needed: 0 B / 16.4 GB available Continue? [Y/n] y Get:1 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 mongod-armv8 arm64 8.0.26 [23.5 MB] Fetched 23.5 MB in 8s (2,871 kB/s) Reading changelogs... Done (Reading database ... 126267 files and directories currently installed.) Preparing to unpack .../mongod-armv8_8.0.26_arm64.deb ... Unpacking mongod-armv8 (8.0.26) over (8.0.23) ... Setting up mongod-armv8 (8.0.26) ... pi@Raspberry:~ $ apt policy mongodb mongodb: Installed: (none) Candidate: (none) Version table: pi@Raspberry:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-orgSchau mal, wie die
/etc/apt/sources.list.d/debian.sources
bei dir aussieht. Da fehlt mit Sicherheit ein Eintrag. Siehe meine Version:Types: deb URIs: http://deb.debian.org/debian/ Suites: trixie trixie-updates Components: main contrib non-free non-free-firmware Signed-By: /usr/share/keyrings/debian-archive-keyring.pgp Types: deb URIs: http://deb.debian.org/debian-security/ Suites: trixie-security Components: main contrib non-free non-free-firmware Signed-By: /usr/share/keyrings/debian-archive-keyring.pgp -
pi@Raspberry:~ $ apt policy mongodb mongodb: Installed: (none) Candidate: (none) Version table: pi@Raspberry:~ $ apt policy mongodb-org Notice: Unable to locate package mongodb-org pi@Raspberry:~ $ ^C pi@Raspberry:~ $ apt policy mongod-armv8 mongod-armv8: Installed: 8.0.26 Candidate: 8.0.26 Version table: *** 8.0.26 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 100 /var/lib/dpkg/status 8.0.25 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.24 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.23 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.21 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.20 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.19 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.18 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.17 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.16 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.15 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.14 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.13 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.12 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.11 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.10 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.9 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.8 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.7 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.6 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.5 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.4 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 Packages 8.0.3 500 500 https://apt.glennr.nl/repo trixie/mongod/8.0 arm64 PackagesDas andere ist von meinem Unificontroller
-
Der Eintrag vom Debian.source
# Types: deb # URIs: http://deb.debian.org/debian/ # Suites: trixie trixie-updates # Components: main contrib non-free non-free-firmware # Signed-By: /usr/share/keyrings/debian-archive-keyring.pgp Types: deb URIs: http://deb.debian.org/debian-security/ Suites: trixie-security Components: main contrib non-free non-free-firmware Signed-By: /usr/share/keyrings/debian-archive-keyring.pgpP.S. muss dann weg. Erstmal vielen Dank Thomas!
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
501
Online33.0k
Benutzer83.3k
Themen1.3m
Beiträge