Switch möglich ? PI2 IOB > PI5 IOB

Homoran

@martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

Wenn man brav nach den Spielregeln

ich hab damit sogar beim Umzug von NUC/Tinkerboard auf den Pi 5, den USB HUB mit den Geräten einfach umgesteckt und alles lief

MartinP

@homoran Das SOLLTE eigentlich so sein ...

Bei meinen nächsten Experimenten mit ESP-Boards und Code-Uploads über USB muss ich auch mal schauen, ob da auch diese "by-id" Einträge zu den USB-Schnittstellen der verschiedenen Boards auftauchen ( am Besten incl. individueller Seriennummern) ...

Da fängt ansonsten auch immer das Suchen an, welcher "ttyUSB.." bzw. "ttyAMA..." Eintrag der Richtige an, wenn man ein Board abzieht und wieder ansteckt ...

Thomas Braun

@martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

( am Besten incl. individueller Seriennummern)

Der Dateiname 'by-id' setzt sich u. a. auch aus der Seriennummer zusammen.

Zimbl

so ich habe wieder mal ein Diag gemacht...


======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: raspberrypi
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 6.1.21-v7+
      Architecture: arm

Model           : Raspberry Pi 2 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 12:47:48 up  4:07,  1 user,  load average: 0.06, 0.18, 0.26
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
~ Under-voltage detected
~ Arm frequency capped

Previously detected issues:
~ Under-voltage has occurred
~ Arm frequency capping has occurred

*** Time and Time Zones ***
               Local time: Tue 2024-04-30 12:47:49 BST
           Universal time: Tue 2024-04-30 11:47:49 UTC
                 RTC time: n/a
                Time zone: Europe/London (BST, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            921M        530M        152M        0.0K        238M        326M
Swap:            99M         68M         31M
Total:          1.0G        599M        184M

          921 M total memory
          531 M used memory
          222 M active memory
          453 M inactive memory
          152 M free memory
           28 M buffer memory
          210 M swap cache
           99 M total swap
           68 M used swap
           31 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G  5.3G   51G  10% /
devtmpfs       devtmpfs  333M     0  333M   0% /dev
tmpfs          tmpfs     461M     0  461M   0% /dev/shm
tmpfs          tmpfs     185M  944K  184M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
tmpfs          tmpfs      93M     0   93M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Apr 30 08:39:50 2024] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=a13bd72e-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue Apr 30 08:39:54 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Tue Apr 30 08:39:54 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Apr 30 08:39:59 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.3G    /var/
2.0G    /var/log
1.9G    /var/log/journal/b4db8c2bf1074a1ba2ba6c07d9465d9d
1.9G    /var/log/journal
170M    /var/cache

Archived and active journals take up 1.8G in the file system.

/opt/iobroker/backups:
64M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
199M    /opt/iobroker/iobroker-data/
114M    /opt/iobroker/iobroker-data/files
72M     /opt/iobroker/iobroker-data/backup-objects
57M     /opt/iobroker/iobroker-data/files/javascript.admin
38M     /opt/iobroker/iobroker-data/files/javascript.admin/static

The five largest files in iobroker-data are:
22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map
10M     /opt/iobroker/iobroker-data/objects.jsonl
8.8M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js
7.0M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.d0c8b930.chunk.js.map
6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.2
/usr/bin/node           v18.20.2
/usr/bin/npm            10.5.0
/usr/bin/npx            10.5.0
/usr/bin/corepack       0.25.2


nodejs:
  Installed: 18.20.2-1nodesource1
  Candidate: 18.20.2-1nodesource1
  Version table:
 *** 18.20.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.8.0

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
  system.adapter.gruenbeck.0              : gruenbeck             : raspberrypi                              - disabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "deconz"       : 1.4.0    , installed 1.4.0
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Adapter    "gruenbeck"    : 0.0.42   , installed 0.0.42
Adapter    "javascript"   : 7.8.0    , installed 7.8.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "modbus"       : 6.1.0    , installed 6.1.0
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.9.0    , installed 6.9.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        900
States:         598

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       157134     18099/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       157968     18099/iobroker.js-c
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11873      449/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       157249     18120/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          11875      449/sshd: /usr/sbin
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       158335     18167/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       158336     18167/io.tuya.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       156662     18231/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12555      574/dhcpcd
udp        0      0 0.0.0.0:34377           0.0.0.0:*                           108        10923      346/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        10921      346/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          14091      574/dhcpcd
udp6       0      0 :::5353                 :::*                                108        10922      346/avahi-daemon: r
udp6       0      0 :::37205                :::*                                108        10924      346/avahi-daemon: r