Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. ioBroker Allgemein
  4. Switch möglich ? PI2 IOB > PI5 IOB

NEWS

  • Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄
    BluefoxB
    Bluefox
    11
    1
    511

  • Weihnachtsangebot 2025! 🎄
    BluefoxB
    Bluefox
    24
    1
    1.7k

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    9.6k

Switch möglich ? PI2 IOB > PI5 IOB

Geplant Angeheftet Gesperrt Verschoben ioBroker Allgemein
28 Beiträge 4 Kommentatoren 1.7k Aufrufe 3 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • HomoranH Homoran

    @martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

    Solltest Du GPIO vom alten Pi nutzen, oder serielle bzw. USB Peripherie angeschlossen haben, könnte ein wenig Anpassung nötig werden ...

    fast alles richtig, bis auf USB. Das funktioniert weiterhin problemlos.
    Lediglich die serielle Schnittstelle auf der GPIO Leiste ist betroffen.
    (abgesehen von den GPIOs)

    Auch bei mir ist das mit der Leiste nur Hörensagen, due nutze ich nicht. USB läuft bei mir mit Smartmeter Lesekopf und 3 USB2RS385 Konvertern absolut problemlos.

    MartinPM Online
    MartinPM Online
    MartinP
    schrieb am zuletzt editiert von
    #18

    @homoran said in Switch möglich ? PI2 IOB > PI5 IOB:

    fast alles richtig, bis auf USB. Das funktioniert weiterhin problemlos.

    Wenn man brav nach den Spielregeln für das Ansprechen der Peripherie den Eintrag in ...

    /dev/serial/by-id
    

    ... genommen hat, kann ich Dir nur zustimmen..

    aus

    /dev/ttyUSB0
    

    Kann aber auch mal etwas anders werden, wenn man das gastgebende System für den USB-Stick ändert ....

    Intel(R) Celeron(R) CPU N3000 @ 1.04GHz 8G RAM 480G SSD
    Virtualization : unprivileged lxc container (debian 12 on Proxmox 8.4.14)
    Linux pve 6.8.12-16-pve
    6 GByte RAM für den Container
    Fritzbox 6591 FW 8.03 (Vodafone Leih-Box)
    Remote-Access über Wireguard der Fritzbox

    HomoranH 1 Antwort Letzte Antwort
    0
    • MartinPM MartinP

      @homoran said in Switch möglich ? PI2 IOB > PI5 IOB:

      fast alles richtig, bis auf USB. Das funktioniert weiterhin problemlos.

      Wenn man brav nach den Spielregeln für das Ansprechen der Peripherie den Eintrag in ...

      /dev/serial/by-id
      

      ... genommen hat, kann ich Dir nur zustimmen..

      aus

      /dev/ttyUSB0
      

      Kann aber auch mal etwas anders werden, wenn man das gastgebende System für den USB-Stick ändert ....

      HomoranH Nicht stören
      HomoranH Nicht stören
      Homoran
      Global Moderator Administrators
      schrieb am zuletzt editiert von
      #19

      @martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

      Wenn man brav nach den Spielregeln

      ich hab damit sogar beim Umzug von NUC/Tinkerboard auf den Pi 5, den USB HUB mit den Geräten einfach umgesteckt und alles lief

      kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

      Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

      der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

      MartinPM 1 Antwort Letzte Antwort
      0
      • HomoranH Homoran

        @martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

        Wenn man brav nach den Spielregeln

        ich hab damit sogar beim Umzug von NUC/Tinkerboard auf den Pi 5, den USB HUB mit den Geräten einfach umgesteckt und alles lief

        MartinPM Online
        MartinPM Online
        MartinP
        schrieb am zuletzt editiert von
        #20

        @homoran Das SOLLTE eigentlich so sein ...

        Bei meinen nächsten Experimenten mit ESP-Boards und Code-Uploads über USB muss ich auch mal schauen, ob da auch diese "by-id" Einträge zu den USB-Schnittstellen der verschiedenen Boards auftauchen ( am Besten incl. individueller Seriennummern) ...

        Da fängt ansonsten auch immer das Suchen an, welcher "ttyUSB.." bzw. "ttyAMA..." Eintrag der Richtige an, wenn man ein Board abzieht und wieder ansteckt ...

        Intel(R) Celeron(R) CPU N3000 @ 1.04GHz 8G RAM 480G SSD
        Virtualization : unprivileged lxc container (debian 12 on Proxmox 8.4.14)
        Linux pve 6.8.12-16-pve
        6 GByte RAM für den Container
        Fritzbox 6591 FW 8.03 (Vodafone Leih-Box)
        Remote-Access über Wireguard der Fritzbox

        Thomas BraunT HomoranH 2 Antworten Letzte Antwort
        1
        • MartinPM MartinP

          @homoran Das SOLLTE eigentlich so sein ...

          Bei meinen nächsten Experimenten mit ESP-Boards und Code-Uploads über USB muss ich auch mal schauen, ob da auch diese "by-id" Einträge zu den USB-Schnittstellen der verschiedenen Boards auftauchen ( am Besten incl. individueller Seriennummern) ...

          Da fängt ansonsten auch immer das Suchen an, welcher "ttyUSB.." bzw. "ttyAMA..." Eintrag der Richtige an, wenn man ein Board abzieht und wieder ansteckt ...

          Thomas BraunT Online
          Thomas BraunT Online
          Thomas Braun
          Most Active
          schrieb am zuletzt editiert von
          #21

          @martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

          ( am Besten incl. individueller Seriennummern)

          Der Dateiname 'by-id' setzt sich u. a. auch aus der Seriennummer zusammen.

          Linux-Werkzeugkasten:
          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
          NodeJS Fixer Skript:
          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

          Z 1 Antwort Letzte Antwort
          0
          • Thomas BraunT Thomas Braun

            @martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

            ( am Besten incl. individueller Seriennummern)

            Der Dateiname 'by-id' setzt sich u. a. auch aus der Seriennummer zusammen.

            Z Offline
            Z Offline
            Zimbl
            schrieb am zuletzt editiert von
            #22

            so ich habe wieder mal ein Diag gemacht...

            
            ======== Start marking the full check here =========
            
            Skript v.2023-10-10
            
            *** BASE SYSTEM ***
               Static hostname: raspberrypi
                     Icon name: computer
              Operating System: Raspbian GNU/Linux 11 (bullseye)
                        Kernel: Linux 6.1.21-v7+
                  Architecture: arm
            
            Model           : Raspberry Pi 2 Model B Rev 1.1
            Docker          : false
            Virtualization  : none
            Kernel          : armv7l
            Userland        : armhf
            
            Systemuptime and Load:
             12:47:48 up  4:07,  1 user,  load average: 0.06, 0.18, 0.26
            CPU threads: 4
            
            
            *** RASPBERRY THROTTLING ***
            Current issues:
            ~ Under-voltage detected
            ~ Arm frequency capped
            
            Previously detected issues:
            ~ Under-voltage has occurred
            ~ Arm frequency capping has occurred
            
            *** Time and Time Zones ***
                           Local time: Tue 2024-04-30 12:47:49 BST
                       Universal time: Tue 2024-04-30 11:47:49 UTC
                             RTC time: n/a
                            Time zone: Europe/London (BST, +0100)
            System clock synchronized: yes
                          NTP service: active
                      RTC in local TZ: no
            
            *** User and Groups ***
            pi
            /home/pi
            pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
            
            *** X-Server-Setup ***
            X-Server:       false
            Desktop:
            Terminal:       tty
            Boot Target:    multi-user.target
            
            *** MEMORY ***
                           total        used        free      shared  buff/cache   available
            Mem:            921M        530M        152M        0.0K        238M        326M
            Swap:            99M         68M         31M
            Total:          1.0G        599M        184M
            
                      921 M total memory
                      531 M used memory
                      222 M active memory
                      453 M inactive memory
                      152 M free memory
                       28 M buffer memory
                      210 M swap cache
                       99 M total swap
                       68 M used swap
                       31 M free swap
            
            Raspberry only:
            oom events: 0
            lifetime oom required: 0 Mbytes
            total time in oom handler: 0 ms
            max time spent in oom handler: 0 ms
            
            *** FAILED SERVICES ***
            
              UNIT LOAD ACTIVE SUB DESCRIPTION
            0 loaded units listed.
            
            *** FILESYSTEM ***
            Filesystem     Type      Size  Used Avail Use% Mounted on
            /dev/root      ext4       59G  5.3G   51G  10% /
            devtmpfs       devtmpfs  333M     0  333M   0% /dev
            tmpfs          tmpfs     461M     0  461M   0% /dev/shm
            tmpfs          tmpfs     185M  944K  184M   1% /run
            tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
            /dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
            tmpfs          tmpfs      93M     0   93M   0% /run/user/1000
            
            Messages concerning ext4 filesystem in dmesg:
            [Tue Apr 30 08:39:50 2024] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=a13bd72e-02 rootfstype=ext4 fsck.repair=yes rootwait
            [Tue Apr 30 08:39:54 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
            [Tue Apr 30 08:39:54 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
            [Tue Apr 30 08:39:59 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
            
            Show mounted filesystems \(real ones only\):
            TARGET  SOURCE         FSTYPE OPTIONS
            /       /dev/mmcblk0p2 ext4   rw,noatime
            `-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
            
            Files in neuralgic directories:
            
            /var:
            2.3G    /var/
            2.0G    /var/log
            1.9G    /var/log/journal/b4db8c2bf1074a1ba2ba6c07d9465d9d
            1.9G    /var/log/journal
            170M    /var/cache
            
            Archived and active journals take up 1.8G in the file system.
            
            /opt/iobroker/backups:
            64M     /opt/iobroker/backups/
            
            /opt/iobroker/iobroker-data:
            199M    /opt/iobroker/iobroker-data/
            114M    /opt/iobroker/iobroker-data/files
            72M     /opt/iobroker/iobroker-data/backup-objects
            57M     /opt/iobroker/iobroker-data/files/javascript.admin
            38M     /opt/iobroker/iobroker-data/files/javascript.admin/static
            
            The five largest files in iobroker-data are:
            22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map
            10M     /opt/iobroker/iobroker-data/objects.jsonl
            8.8M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js
            7.0M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.d0c8b930.chunk.js.map
            6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
            
            USB-Devices by-id:
            USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':
            
            /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0
            
            *** NodeJS-Installation ***
            
            /usr/bin/nodejs         v18.20.2
            /usr/bin/node           v18.20.2
            /usr/bin/npm            10.5.0
            /usr/bin/npx            10.5.0
            /usr/bin/corepack       0.25.2
            
            
            nodejs:
              Installed: 18.20.2-1nodesource1
              Candidate: 18.20.2-1nodesource1
              Version table:
             *** 18.20.2-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                    100 /var/lib/dpkg/status
                 18.20.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.20.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.19.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.19.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.18.2-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.18.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.18.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.17.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.17.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.16.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.16.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.15.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.14.2-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.14.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.14.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.13.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.12.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.11.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.10.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.9.1-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.9.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.8.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.7.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.6.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.5.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.4.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.3.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.2.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.1.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 18.0.0-1nodesource1 1001
                    500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                 12.22.12~dfsg-1~deb11u4 500
                    500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
            
            Temp directories causing npm8 problem: 0
            No problems detected
            
            Errors in npm tree:
            
            *** ioBroker-Installation ***
            
            ioBroker Status
            iobroker is running on this host.
            
            
            Objects type: jsonl
            States  type: jsonl
            
            Core adapters versions
            js-controller:  5.0.19
            admin:          6.13.16
            javascript:     7.8.0
            
            Adapters from github:   0
            
            Adapter State
            + system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
            + system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
              system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
              system.adapter.gruenbeck.0              : gruenbeck             : raspberrypi                              - disabled
            + system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
            + system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
            + system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
            + system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
            + system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
            + system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
            + system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0
            
            + instance is alive
            
            Enabled adapters with bindings
            + system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
            + system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
            + system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0
            
            ioBroker-Repositories
            stable        : http://download.iobroker.net/sources-dist.json
            beta          : http://download.iobroker.net/sources-dist-latest.json
            
            Active repo(s): stable
            
            Installed ioBroker-Instances
            Used repository: stable
            Adapter    "admin"        : 6.13.16  , installed 6.13.16
            Adapter    "backitup"     : 2.11.0   , installed 2.11.0
            Adapter    "deconz"       : 1.4.0    , installed 1.4.0
            Adapter    "discovery"    : 4.4.0    , installed 4.4.0
            Adapter    "gruenbeck"    : 0.0.42   , installed 0.0.42
            Adapter    "javascript"   : 7.8.0    , installed 7.8.0
            Controller "js-controller": 5.0.19   , installed 5.0.19
            Adapter    "modbus"       : 6.1.0    , installed 6.1.0
            Adapter    "ping"         : 1.6.2    , installed 1.6.2
            Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
            Adapter    "shelly"       : 6.9.0    , installed 6.9.0
            Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
            Adapter    "tuya"         : 3.15.0   , installed 3.15.0
            Adapter    "zigbee"       : 1.10.3   , installed 1.10.3
            
            Objects and States
            Please stand by - This may take a while
            Objects:        900
            States:         598
            
            *** OS-Repositories and Updates ***
            Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
            Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
            Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
            Reading package lists...
            Pending Updates: 0
            
            *** Listening Ports ***
            Active Internet connections (only servers)
            Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
            tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       157134     18099/iobroker.js-c
            tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       157968     18099/iobroker.js-c
            tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11873      449/sshd: /usr/sbin
            tcp6       0      0 :::8081                 :::*                    LISTEN      1001       157249     18120/io.admin.0
            tcp6       0      0 :::22                   :::*                    LISTEN      0          11875      449/sshd: /usr/sbin
            udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       158335     18167/io.tuya.0
            udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       158336     18167/io.tuya.0
            udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       156662     18231/io.shelly.0
            udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12555      574/dhcpcd
            udp        0      0 0.0.0.0:34377           0.0.0.0:*                           108        10923      346/avahi-daemon: r
            udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        10921      346/avahi-daemon: r
            udp6       0      0 :::546                  :::*                                0          14091      574/dhcpcd
            udp6       0      0 :::5353                 :::*                                108        10922      346/avahi-daemon: r
            udp6       0      0 :::37205                :::*                                108        10924      346/avahi-daemon: r
            
            
            Thomas BraunT 1 Antwort Letzte Antwort
            0
            • Z Zimbl

              so ich habe wieder mal ein Diag gemacht...

              
              ======== Start marking the full check here =========
              
              Skript v.2023-10-10
              
              *** BASE SYSTEM ***
                 Static hostname: raspberrypi
                       Icon name: computer
                Operating System: Raspbian GNU/Linux 11 (bullseye)
                          Kernel: Linux 6.1.21-v7+
                    Architecture: arm
              
              Model           : Raspberry Pi 2 Model B Rev 1.1
              Docker          : false
              Virtualization  : none
              Kernel          : armv7l
              Userland        : armhf
              
              Systemuptime and Load:
               12:47:48 up  4:07,  1 user,  load average: 0.06, 0.18, 0.26
              CPU threads: 4
              
              
              *** RASPBERRY THROTTLING ***
              Current issues:
              ~ Under-voltage detected
              ~ Arm frequency capped
              
              Previously detected issues:
              ~ Under-voltage has occurred
              ~ Arm frequency capping has occurred
              
              *** Time and Time Zones ***
                             Local time: Tue 2024-04-30 12:47:49 BST
                         Universal time: Tue 2024-04-30 11:47:49 UTC
                               RTC time: n/a
                              Time zone: Europe/London (BST, +0100)
              System clock synchronized: yes
                            NTP service: active
                        RTC in local TZ: no
              
              *** User and Groups ***
              pi
              /home/pi
              pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker
              
              *** X-Server-Setup ***
              X-Server:       false
              Desktop:
              Terminal:       tty
              Boot Target:    multi-user.target
              
              *** MEMORY ***
                             total        used        free      shared  buff/cache   available
              Mem:            921M        530M        152M        0.0K        238M        326M
              Swap:            99M         68M         31M
              Total:          1.0G        599M        184M
              
                        921 M total memory
                        531 M used memory
                        222 M active memory
                        453 M inactive memory
                        152 M free memory
                         28 M buffer memory
                        210 M swap cache
                         99 M total swap
                         68 M used swap
                         31 M free swap
              
              Raspberry only:
              oom events: 0
              lifetime oom required: 0 Mbytes
              total time in oom handler: 0 ms
              max time spent in oom handler: 0 ms
              
              *** FAILED SERVICES ***
              
                UNIT LOAD ACTIVE SUB DESCRIPTION
              0 loaded units listed.
              
              *** FILESYSTEM ***
              Filesystem     Type      Size  Used Avail Use% Mounted on
              /dev/root      ext4       59G  5.3G   51G  10% /
              devtmpfs       devtmpfs  333M     0  333M   0% /dev
              tmpfs          tmpfs     461M     0  461M   0% /dev/shm
              tmpfs          tmpfs     185M  944K  184M   1% /run
              tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
              /dev/mmcblk0p1 vfat      255M   51M  205M  20% /boot
              tmpfs          tmpfs      93M     0   93M   0% /run/user/1000
              
              Messages concerning ext4 filesystem in dmesg:
              [Tue Apr 30 08:39:50 2024] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=a13bd72e-02 rootfstype=ext4 fsck.repair=yes rootwait
              [Tue Apr 30 08:39:54 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
              [Tue Apr 30 08:39:54 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
              [Tue Apr 30 08:39:59 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
              
              Show mounted filesystems \(real ones only\):
              TARGET  SOURCE         FSTYPE OPTIONS
              /       /dev/mmcblk0p2 ext4   rw,noatime
              `-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
              
              Files in neuralgic directories:
              
              /var:
              2.3G    /var/
              2.0G    /var/log
              1.9G    /var/log/journal/b4db8c2bf1074a1ba2ba6c07d9465d9d
              1.9G    /var/log/journal
              170M    /var/cache
              
              Archived and active journals take up 1.8G in the file system.
              
              /opt/iobroker/backups:
              64M     /opt/iobroker/backups/
              
              /opt/iobroker/iobroker-data:
              199M    /opt/iobroker/iobroker-data/
              114M    /opt/iobroker/iobroker-data/files
              72M     /opt/iobroker/iobroker-data/backup-objects
              57M     /opt/iobroker/iobroker-data/files/javascript.admin
              38M     /opt/iobroker/iobroker-data/files/javascript.admin/static
              
              The five largest files in iobroker-data are:
              22M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js.map
              10M     /opt/iobroker/iobroker-data/objects.jsonl
              8.8M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.578d79d9.js
              7.0M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/675.d0c8b930.chunk.js.map
              6.3M    /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
              
              USB-Devices by-id:
              USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':
              
              /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0
              
              *** NodeJS-Installation ***
              
              /usr/bin/nodejs         v18.20.2
              /usr/bin/node           v18.20.2
              /usr/bin/npm            10.5.0
              /usr/bin/npx            10.5.0
              /usr/bin/corepack       0.25.2
              
              
              nodejs:
                Installed: 18.20.2-1nodesource1
                Candidate: 18.20.2-1nodesource1
                Version table:
               *** 18.20.2-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                      100 /var/lib/dpkg/status
                   18.20.1-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.20.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.19.1-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.19.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.18.2-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.18.1-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.18.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.17.1-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.17.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.16.1-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.16.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.15.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.14.2-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.14.1-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.14.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.13.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.12.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.11.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.10.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.9.1-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.9.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.8.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.7.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.6.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.5.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.4.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.3.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.2.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.1.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   18.0.0-1nodesource1 1001
                      500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
                   12.22.12~dfsg-1~deb11u4 500
                      500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
              
              Temp directories causing npm8 problem: 0
              No problems detected
              
              Errors in npm tree:
              
              *** ioBroker-Installation ***
              
              ioBroker Status
              iobroker is running on this host.
              
              
              Objects type: jsonl
              States  type: jsonl
              
              Core adapters versions
              js-controller:  5.0.19
              admin:          6.13.16
              javascript:     7.8.0
              
              Adapters from github:   0
              
              Adapter State
              + system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
              + system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
                system.adapter.discovery.0              : discovery             : raspberrypi                              - disabled
                system.adapter.gruenbeck.0              : gruenbeck             : raspberrypi                              - disabled
              + system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
              + system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
              + system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
              + system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
              + system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
              + system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
              + system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0
              
              + instance is alive
              
              Enabled adapters with bindings
              + system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
              + system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
              + system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_ceccc8e6cbc9eb119edf8b4f1d69213e-if00-port0
              
              ioBroker-Repositories
              stable        : http://download.iobroker.net/sources-dist.json
              beta          : http://download.iobroker.net/sources-dist-latest.json
              
              Active repo(s): stable
              
              Installed ioBroker-Instances
              Used repository: stable
              Adapter    "admin"        : 6.13.16  , installed 6.13.16
              Adapter    "backitup"     : 2.11.0   , installed 2.11.0
              Adapter    "deconz"       : 1.4.0    , installed 1.4.0
              Adapter    "discovery"    : 4.4.0    , installed 4.4.0
              Adapter    "gruenbeck"    : 0.0.42   , installed 0.0.42
              Adapter    "javascript"   : 7.8.0    , installed 7.8.0
              Controller "js-controller": 5.0.19   , installed 5.0.19
              Adapter    "modbus"       : 6.1.0    , installed 6.1.0
              Adapter    "ping"         : 1.6.2    , installed 1.6.2
              Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
              Adapter    "shelly"       : 6.9.0    , installed 6.9.0
              Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
              Adapter    "tuya"         : 3.15.0   , installed 3.15.0
              Adapter    "zigbee"       : 1.10.3   , installed 1.10.3
              
              Objects and States
              Please stand by - This may take a while
              Objects:        900
              States:         598
              
              *** OS-Repositories and Updates ***
              Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
              Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
              Hit:3 https://deb.nodesource.com/node_18.x nodistro InRelease
              Reading package lists...
              Pending Updates: 0
              
              *** Listening Ports ***
              Active Internet connections (only servers)
              Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
              tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       157134     18099/iobroker.js-c
              tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       157968     18099/iobroker.js-c
              tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11873      449/sshd: /usr/sbin
              tcp6       0      0 :::8081                 :::*                    LISTEN      1001       157249     18120/io.admin.0
              tcp6       0      0 :::22                   :::*                    LISTEN      0          11875      449/sshd: /usr/sbin
              udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       158335     18167/io.tuya.0
              udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       158336     18167/io.tuya.0
              udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       156662     18231/io.shelly.0
              udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12555      574/dhcpcd
              udp        0      0 0.0.0.0:34377           0.0.0.0:*                           108        10923      346/avahi-daemon: r
              udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        10921      346/avahi-daemon: r
              udp6       0      0 :::546                  :::*                                0          14091      574/dhcpcd
              udp6       0      0 :::5353                 :::*                                108        10922      346/avahi-daemon: r
              udp6       0      0 :::37205                :::*                                108        10924      346/avahi-daemon: r
              
              
              Thomas BraunT Online
              Thomas BraunT Online
              Thomas Braun
              Most Active
              schrieb am zuletzt editiert von
              #23

              @zimbl sagte in Switch möglich ? PI2 IOB > PI5 IOB:

              Time zone: Europe/London (BST, +0100)

              Setz das richtig. Das ist wichtig.

              Die Ausgabe von iob diag ist nicht vollständig.

              Linux-Werkzeugkasten:
              https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
              NodeJS Fixer Skript:
              https://forum.iobroker.net/topic/68035/iob-node-fix-skript
              iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

              Z 1 Antwort Letzte Antwort
              0
              • Thomas BraunT Thomas Braun

                @zimbl sagte in Switch möglich ? PI2 IOB > PI5 IOB:

                Time zone: Europe/London (BST, +0100)

                Setz das richtig. Das ist wichtig.

                Die Ausgabe von iob diag ist nicht vollständig.

                Z Offline
                Z Offline
                Zimbl
                schrieb am zuletzt editiert von
                #24

                @thomas-braun

                jetzt habe ich den Standort angepasst und nun ist der Pi nicht mehr zu erreichen...
                ich schaue doch mal was ich da beim Netzteil machen kann...

                Thomas BraunT 1 Antwort Letzte Antwort
                0
                • Z Zimbl

                  @thomas-braun

                  jetzt habe ich den Standort angepasst und nun ist der Pi nicht mehr zu erreichen...
                  ich schaue doch mal was ich da beim Netzteil machen kann...

                  Thomas BraunT Online
                  Thomas BraunT Online
                  Thomas Braun
                  Most Active
                  schrieb am zuletzt editiert von
                  #25

                  @zimbl sagte in Switch möglich ? PI2 IOB > PI5 IOB:

                  jetzt habe ich den Standort angepasst und nun ist der Pi nicht mehr zu erreichen...

                  ???

                  Linux-Werkzeugkasten:
                  https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                  NodeJS Fixer Skript:
                  https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                  iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                  1 Antwort Letzte Antwort
                  0
                  • MartinPM MartinP

                    @homoran Das SOLLTE eigentlich so sein ...

                    Bei meinen nächsten Experimenten mit ESP-Boards und Code-Uploads über USB muss ich auch mal schauen, ob da auch diese "by-id" Einträge zu den USB-Schnittstellen der verschiedenen Boards auftauchen ( am Besten incl. individueller Seriennummern) ...

                    Da fängt ansonsten auch immer das Suchen an, welcher "ttyUSB.." bzw. "ttyAMA..." Eintrag der Richtige an, wenn man ein Board abzieht und wieder ansteckt ...

                    HomoranH Nicht stören
                    HomoranH Nicht stören
                    Homoran
                    Global Moderator Administrators
                    schrieb am zuletzt editiert von
                    #26

                    @martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

                    am Besten incl. individueller Seriennummern

                    da musst du beim Kauf drauf achten ob die Geräte individuelle Seriennummern haben. Billige USB2RS485 haben das z.B. meines Wissens nicht.

                    kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                    Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                    der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                    Thomas BraunT 1 Antwort Letzte Antwort
                    0
                    • HomoranH Homoran

                      @martinp sagte in Switch möglich ? PI2 IOB > PI5 IOB:

                      am Besten incl. individueller Seriennummern

                      da musst du beim Kauf drauf achten ob die Geräte individuelle Seriennummern haben. Billige USB2RS485 haben das z.B. meines Wissens nicht.

                      Thomas BraunT Online
                      Thomas BraunT Online
                      Thomas Braun
                      Most Active
                      schrieb am zuletzt editiert von
                      #27

                      @homoran sagte in Switch möglich ? PI2 IOB > PI5 IOB:

                      Billige USB2RS485 haben das z.B. meines Wissens nicht.

                      Oder immer die gleiche...

                      Linux-Werkzeugkasten:
                      https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                      NodeJS Fixer Skript:
                      https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                      iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                      HomoranH 1 Antwort Letzte Antwort
                      0
                      • Thomas BraunT Thomas Braun

                        @homoran sagte in Switch möglich ? PI2 IOB > PI5 IOB:

                        Billige USB2RS485 haben das z.B. meines Wissens nicht.

                        Oder immer die gleiche...

                        HomoranH Nicht stören
                        HomoranH Nicht stören
                        Homoran
                        Global Moderator Administrators
                        schrieb am zuletzt editiert von
                        #28

                        @thomas-braun sagte in Switch möglich ? PI2 IOB > PI5 IOB:

                        Oder immer die gleiche...

                        sachichdoch

                        @homoran sagte in Switch möglich ? PI2 IOB > PI5 IOB:

                        individuelle Seriennummern

                        haben sie nicht

                        kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.

                        Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.

                        der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -

                        1 Antwort Letzte Antwort
                        0
                        Antworten
                        • In einem neuen Thema antworten
                        Anmelden zum Antworten
                        • Älteste zuerst
                        • Neuste zuerst
                        • Meiste Stimmen


                        Support us

                        ioBroker
                        Community Adapters
                        Donate
                        FAQ Cloud / IOT
                        HowTo: Node.js-Update
                        HowTo: Backup/Restore
                        Downloads
                        BLOG

                        388

                        Online

                        32.5k

                        Benutzer

                        81.8k

                        Themen

                        1.3m

                        Beiträge
                        Community
                        Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                        ioBroker Community 2014-2025
                        logo
                        • Anmelden

                        • Du hast noch kein Konto? Registrieren

                        • Anmelden oder registrieren, um zu suchen
                        • Erster Beitrag
                          Letzter Beitrag
                        0
                        • Home
                        • Aktuell
                        • Tags
                        • Ungelesen 0
                        • Kategorien
                        • Unreplied
                        • Beliebt
                        • GitHub
                        • Docu
                        • Hilfe