Ziggbe sendet nicht mehr an empfängt aber noch Daten

Asgothian

Dann poste doch mal das log des startversuchs des zigbee Adapters.

Wichtig:

Adapter anhalten
30 Sekunden warten
zigbee adapter starten
30 Sekunden warten
log herunter laden
die log Einträge des zigbee Adapters hier posten.

A.

Thomas Braun

sudo systemctl set-default multi-user.target

Und schmeiß die Doublette in den Repos raus, verwirrt nur.

iob repo del Aktuell

Schau dir im LogFile an, wie der zigbee-Adapter nun tickt:

iob logs --watch

und einen Kaltstart des Adapters auslösen.

Tapdance 0

Gibt es eine Möglichkeit "iob logs --watch" nach einem bestimmten adapter zu filtern? Das Protokoll ist zu lang um es hier zu posten.

DANKE für die Unterstützung

Das ist aus der Webansicht.



zigbee.0
Zeit
warn
Nachricht

zigbee.0
2024-01-19 16:19:55.389	error	Error herdsman start

zigbee.0
2024-01-19 16:19:55.388	error	Failed to start Zigbee

zigbee.0
2024-01-19 16:19:55.388	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"

zigbee.0
2024-01-19 16:19:45.066	error	Error herdsman start

zigbee.0
2024-01-19 16:19:45.065	error	Failed to start Zigbee

zigbee.0
2024-01-19 16:19:45.064	error	Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"

Thomas Braun

@tapdance-0

iob logs | grep zigbee

Aber wenn das Log zu lang ist dann stimmt da auch anderes nicht. LogLevel zu hoch oder da tickt irgendwas anderes aus.

Mein Log von heute hat z. B. nur 28 Zeilen.

echad@chet:/opt/iobroker $ iob logs | wc -l
28

Und du sollst auch nur die neuen Zeilen posten, die nach einem Kaltstart des Adapters erscheinen. Das können nicht zu viele sein.

Tapdance 0

@thomas-braun
Seltsam diesmal ist der Adapter gestartet hat aber immer noch das Problem das nicht alle Komponenten funtionieren.

2024-01-19 17:07:11.379  - info: host.raspberrypi "system.adapter.zigbee.0" disabled
2024-01-19 17:07:11.381  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true)
2024-01-19 17:07:11.393  - info: zigbee.0 (10688) Got terminate signal TERMINATE_YOURSELF
2024-01-19 17:07:11.450  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal
2024-01-19 17:07:11.398  - info: zigbee.0 (10688) cleaned everything up...
2024-01-19 17:07:11.449  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d00044d8e0b = false
2024-01-19 17:07:11.465  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d00044d8e0b = 0
2024-01-19 17:07:11.481  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d000257bae7 = false
2024-01-19 17:07:11.494  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d000257bae7 = 0
2024-01-19 17:07:11.500  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d00045f7cee = false
2024-01-19 17:07:11.504  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d00045f7cee = 0
2024-01-19 17:07:11.509  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d0004521481 = false
2024-01-19 17:07:11.512  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d0004521481 = 0
2024-01-19 17:07:11.517  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d000461b53e = false
2024-01-19 17:07:11.521  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d000461b53e = 0
2024-01-19 17:07:11.527  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x680ae2fffec91ea4 = false
2024-01-19 17:07:11.530  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x680ae2fffec91ea4 = 0
2024-01-19 17:07:11.535  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x588e81fffe2b8762 = false
2024-01-19 17:07:11.540  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x588e81fffe2b8762 = 0
2024-01-19 17:07:11.545  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x680ae2fffe924d57 = false
2024-01-19 17:07:11.548  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x680ae2fffe924d57 = 0
2024-01-19 17:07:11.554  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d00045eb708 = false
2024-01-19 17:07:11.557  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d00045eb708 = 0
2024-01-19 17:07:11.562  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d0002a71e25 = false
2024-01-19 17:07:11.566  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d0002a71e25 = 0
2024-01-19 17:07:11.570  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x04cf8cdf3c794764 = false
2024-01-19 17:07:11.574  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x04cf8cdf3c794764 = 0
2024-01-19 17:07:11.578  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x04cf8cdf3c7946a1 = false
2024-01-19 17:07:11.581  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7946a1 = 0
2024-01-19 17:07:11.585  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d00045f8d3d = false
2024-01-19 17:07:11.588  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d00045f8d3d = 0
2024-01-19 17:07:11.592  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d0004597653 = false
2024-01-19 17:07:11.596  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d0004597653 = 0
2024-01-19 17:07:11.600  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x842e14fffe768d41 = false
2024-01-19 17:07:11.603  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x842e14fffe768d41 = 0
2024-01-19 17:07:11.608  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0xbc33acfffe2ab392 = false
2024-01-19 17:07:11.611  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0xbc33acfffe2ab392 = 0
2024-01-19 17:07:11.616  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x04cf8cdf3c7b5255 = false
2024-01-19 17:07:11.619  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7b5255 = 0
2024-01-19 17:07:11.622  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x04cf8cdf3c7b51f7 = false
2024-01-19 17:07:11.626  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x04cf8cdf3c7b51f7 = 0
2024-01-19 17:07:11.631  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x04cf8cdf3c78b7ba = false
2024-01-19 17:07:11.635  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x04cf8cdf3c78b7ba = 0
2024-01-19 17:07:11.639  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x00158d000461da61 = false
2024-01-19 17:07:11.643  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x00158d000461da61 = 0
2024-01-19 17:07:11.648  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0xf4b3b1fffef87315 = false
2024-01-19 17:07:11.651  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87315 = 0
2024-01-19 17:07:11.654  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0xf4b3b1fffef8731e = false
2024-01-19 17:07:11.658  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0xf4b3b1fffef8731e = 0
2024-01-19 17:07:11.662  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0xf4b3b1fffef84d2d = false
2024-01-19 17:07:11.665  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0xf4b3b1fffef84d2d = 0
2024-01-19 17:07:11.670  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0xf4b3b1fffef87b6a = false
2024-01-19 17:07:11.673  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87b6a = 0
2024-01-19 17:07:11.678  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0xf4b3b1fffef853ac = false
2024-01-19 17:07:11.681  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0xf4b3b1fffef853ac = 0
2024-01-19 17:07:11.684  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0x04cd15fffefe9ca8 = false
2024-01-19 17:07:11.689  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0x04cd15fffefe9ca8 = 0
2024-01-19 17:07:11.693  - debug: zigbee.0 (10688) DeviceAvailability:Publish available for 0xa4c138c66404899e = false
2024-01-19 17:07:11.697  - debug: zigbee.0 (10688) DeviceAvailability:Publish LQ for 0xa4c138c66404899e = 0
2024-01-19 17:07:11.708  - info: zigbee.0 (10688) Zigbee: disabling joining new devices.
2024-01-19 17:07:12.198  - warn: zigbee.0 (10688) Failed to stop zigbee during startup
2024-01-19 17:07:12.199  - info: zigbee.0 (10688) terminating
2024-01-19 17:07:12.200  - debug: zigbee.0 (10688) Plugin sentry destroyed
2024-01-19 17:07:12.200  - info: zigbee.0 (10688) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-01-19 17:07:12.201  - info: zigbee.0 (10688) terminating
2024-01-19 17:07:12.267  - info: zigbee.0 (10688) debug devices set to []
2024-01-19 17:07:12.452  - info: host.raspberrypi stopInstance system.adapter.zigbee.0 killing pid 10688
2024-01-19 17:07:12.842  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-01-19 17:08:03.340  - info: host.raspberrypi "system.adapter.zigbee.0" enabled
2024-01-19 17:08:03.661  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 13374
2024-01-19 17:08:07.955  - debug: zigbee.0 (13374) Redis Objects: Use Redis connection: 127.0.0.1:9001
2024-01-19 17:08:08.003  - debug: zigbee.0 (13374) Objects client ready ... initialize now
2024-01-19 17:08:08.006  - debug: zigbee.0 (13374) Objects create System PubSub Client
2024-01-19 17:08:08.007  - debug: zigbee.0 (13374) Objects create User PubSub Client
2024-01-19 17:08:08.070  - debug: zigbee.0 (13374) Objects client initialize lua scripts
2024-01-19 17:08:08.080  - debug: zigbee.0 (13374) Objects connected to redis: 127.0.0.1:9001
2024-01-19 17:08:08.127  - debug: zigbee.0 (13374) Redis States: Use Redis connection: 127.0.0.1:9000
2024-01-19 17:08:08.147  - debug: zigbee.0 (13374) States create System PubSub Client
2024-01-19 17:08:08.148  - debug: zigbee.0 (13374) States create User PubSub Client
2024-01-19 17:08:08.224  - debug: zigbee.0 (13374) States connected to redis: 127.0.0.1:9000
2024-01-19 17:08:08.283  - debug: zigbee.0 (13374) Plugin sentry Initialize Plugin (enabled=true)
2024-01-19 17:08:08.883  - info: zigbee.0 (13374) starting. Version 1.9.7 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17
2024-01-19 17:08:08.917  - debug: zigbee.0 (13374) Using zigbee-herdsman with settings: {"network":{"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13]},"databasePath":"/opt/iobroker/iobroker-data/zigbee_0/shepherd.db","backupPath":"/opt/iobroker/iobroker-data/zigbee_0/nvbackup.json","serialPort":{"baudRate":115200,"rtscts":false,"path":"/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00","adapter":"zstack"},"adapter":{"forceStartWithInconsistentAdapterConfiguration":false},"legacy":false}
2024-01-19 17:08:09.001  - info: zigbee.0 (13374) delete old Backup files. keep only last 10
2024-01-19 17:08:09.003  - info: zigbee.0 (13374) Starting Zigbee  npm ...
2024-01-19 17:08:09.052  - debug: zigbee.0 (13374) Starting zigbee-herdsman...
2024-01-19 17:08:09.383  - info: zigbee.0 (13374) Installed Version: iobroker.zigbee@1.9.7
2024-01-19 17:08:10.054  - debug: zigbee.0 (13374) Backup /opt/iobroker/iobroker-data/zigbee_0/backup_2024_01_19-17_08_08.tar.gz success
2024-01-19 17:08:12.335  - debug: zigbee.0 (13374) zigbee-herdsman started
2024-01-19 17:08:12.337  - info: zigbee.0 (13374) Coordinator firmware version: {"type":"zStack12","meta":{"transportrev":2,"product":0,"majorrel":2,"minorrel":6,"maintrel":3,"revision":20190608}}
2024-01-19 17:08:12.343  - debug: zigbee.0 (13374) Zigbee network parameters: panID=6754 channel=11 extendedPanID=dddddddddddddddd
2024-01-19 17:08:12.343  - info: zigbee.0 (13374) Disable LED
2024-01-19 17:08:12.344  - info: zigbee.0 (13374) Unable to disable LED, unsupported function.
2024-01-19 17:08:12.362  - info: zigbee.0 (13374)   --> transmitPower : normal
2024-01-19 17:08:12.384  - info: zigbee.0 (13374) Currently 28 devices are joined:
2024-01-19 17:08:12.385  - debug: zigbee.0 (13374) DeviceAvailability:Publish available for 0x00158d00044d8e0b = true
2024-01-19 17:08:12.393  - debug: zigbee.0 (13374) DeviceAvailability:Publish LQ for 0x00158d00044d8e0b = 10
2024-01-19 17:08:12.402  - debug: zigbee.0 (13374) DeviceAvailability:Publish available for 0x00158d000257bae7 = true
2024-01-19 17:08:12.409  - debug: zigbee.0 (13374) DeviceAvailability:Publish LQ for 0x00158d000257bae7 = 10
2024-01-19 17:08:12.413  - debug: zigbee.0 (13374) DeviceAvailability:Publish available for 0x00158d00045f7cee = true
2024-01-19 17:08:12.417  - debug: zigbee.0 (13374) DeviceAvailability:Publish LQ for 0x00158d00045f7cee = 10
2024-01-19 17:08:12.420  - debug: zigbee.0 (13374) DeviceAvailability:Publish available for 0x00158d0004521481 = true
2024-01-19 17:08:12.423  - debug: zigbee.0 (13374) DeviceAvailability:Publish LQ for 0x00158d0004521481 = 10
2024-01-19 17:08:12.427  - debug: zigbee.0 (13374) DeviceAvailability:Publish available for 0x00158d000461b53e = true
grep: (standard input): binary file matches

Thomas Braun

@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:

Currently 28 devices are joined

Sind für den ollen CC2531 auch zuviele Geräte. Das packt der nicht mehr.
Tausch das gegen was aktuelles aus.

CC2531:
Warning 1: requires additional hardware to flash (CC debugger + download cable)
Warning 2: might not be powerful enough to handle networks of 20+ devices
Warning 3: this adapter has bad range

Asgothian

@thomas-braun sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:

@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:

Currently 28 devices are joined

Sind für den ollen CC2531 auch zuviele Geräte. Das packt der nicht mehr.
Tausch das gegen was aktuelles aus.

CC2531:
Warning 1: requires additional hardware to flash (CC debugger + download cable)
Warning 2: might not be powerful enough to handle networks of 20+ devices
Warning 3: this adapter has bad range

Dem kann ich mich nur anschließen.

Auch: der Zigbee Adapter braucht insbesondere bei den cc2531 durchaus mal eine oder 2 Minuten bis er stabil läuft. Bis da hin ist da zigbee Netzwerk mit Rekonstruktion beschäftigt.

A.

Tapdance 0

Gegen was würdet ihr den den tauschen? muss ich dann alles neu anlernen und programmieren?

Tapdance 0

Am besten was von Amazon was sofort lieferbar ist und garantiert sofort funktioniert. Den stick musste ich damals flashen und das hat Tage gedauert bis es funktioniert hat. Ist echt nervig wenn das halbe Smart Home nicht funktioniert.

DANKE noch mal für die schnelle Hilfe.

Thomas Braun

@tapdance-0

Empfohlene Sticks:

https://www.zigbee2mqtt.io/guide/adapters/#recommended

Wechsel des Sticks:
https://www.zigbee2mqtt.io/guide/faq/#how-do-i-migrate-from-one-adapter-to-another

Tapdance 0

Sorry spreche kein englisch und blicke da nicht durch. Sind die jetzt sofort funktionsbereit oder muss ich da noch bestimmte Firmware drauf spielen und wo genau bekomme ich die?

USB connected (easiest)

Electrolama zig-a-zig-ah! (zzh!)
Slaesh's CC2652RB stick
Tube's CC2652P2 USB Coordinator
Egony Stick V4
ZigStar Stick v4
CircuitSetup's CC2652P2 USB Coordinator
SMLIGHT CC2652P Zigbee USB Adapter SLZB-02
SONOFF Zigbee 3.0 USB Dongle Plus ZBDongle-P
Vision CC2652 dongle
JetHome JetStick Z2/ZB6UX CC2652P1

Thomas Braun

@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:

Besorg dir den:

SONOFF Zigbee 3.0 USB Dongle Plus ZBDongle-P

Der dürfte auch über die Amazonen erhältlich sein und hat die passende Firmware. Aufpassen, es gibt auch eine Version -E, du möchtest aber lieber -P haben.

Tapdance 0

@thomas-braun

dann müsste der das sein richtig?

DANKE noch mal für die Unterstützung.

https://www.amazon.de/SONOFF-Gateway-CC2652P-Assistant-Zigbee2MQTT/dp/B09KXTCMSC/ref=sr_1_3?__mk_de_DE=ÅMÅŽÕÑ&crid=34U2S4ZAU8ZO1&keywords=SONOFF+Zigbee+3.0+USB+Dongle+Plus+ZBDongle-P&qid=1705685431&sprefix=%2Caps%2C192&sr=8-3

Thomas Braun

@tapdance-0

Ja, das sollte der richtige sein.

Thomas Braun

@tapdance-0
Leg dir auch gleich eine 1,5m-USB-Verlängerung in den Einkauskorb. Empfiehlt sich für sowas.

Tapdance 0

@thomas-braun

Danke habe ich gemacht hoffe ich bekommen das dann morgen hin wenn er geliefert wird.

Danke noch mal für die Unterstützung.

Tapdance 0

@thomas-braun

Der neue Zigbee stick ist da und angeschlossen, doch jetzt startet der Zigbee Adapter wieder nicht

Hoffe ihr könnt noch mal helfen.

DANKE


======== Start marking the full check here =========


Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: raspberrypi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi7-rpi-v8
    Architecture: arm64

Model           : Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 16:32:45 up 3 min,  3 users,  load average: 1.29, 1.41, 0.63
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2024-01-21 16:32:45 CET
           Universal time: Sun 2024-01-21 15:32:45 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
PI
/home/PI
PI adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        1.6G        2.0G        1.3M        417M        2.3G
Swap:           104M          0B        104M
Total:          4.1G        1.6G        2.1G

         3793 M total memory
         1567 M used memory
         1595 M active memory
          164 M inactive memory
         1903 M free memory
           39 M buffer memory
          358 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  379M   1% /run
/dev/mmcblk0p2 ext4       28G  7.0G   20G  27% /
tmpfs          tmpfs     1.9G  8.0K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   73M  438M  15% /boot/firmware
tmpfs          tmpfs     380M   32K  380M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Jan 21 16:28:52 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:64:62:CC vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=9515910b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Sun Jan 21 16:28:56 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Sun Jan 21 16:28:59 2024] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
643M    /var/
194M    /var/lib
185M    /var/cache
172M    /var/cache/apt
163M    /var/log

Archived and active journals take up 161.5M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
369M    /opt/iobroker/iobroker-data/
270M    /opt/iobroker/iobroker-data/files
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png
73M     /opt/iobroker/iobroker-data/backup-objects
67M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
22M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map
8.3M    /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js
7.5M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/691.26ff76ce.chunk.js.map
7.1M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.d3cce782.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_8eb6f719a99ded11ad35dca5a7669f5d-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            10.2.3
/usr/bin/npx            10.2.3
/usr/bin/corepack       0.22.0


nodejs:
  Installed: 18.19.0-1nodesource1
  Candidate: 18.19.0-1nodesource1
  Version table:
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
 *** 18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.17
admin:          6.12.0
javascript:     7.1.6

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alarm.0                  : alarm                 : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.broadlink2.0             : broadlink2            : raspberrypi                              -  enabled
+ system.adapter.cloud.0                  : cloud                 : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : raspberrypi                              -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
  system.adapter.icons-icons8.0           : icons-icons8          : raspberrypi                              - disabled
  system.adapter.icons-material-png.0     : icons-material-png    : raspberrypi                              - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi                              - disabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.mobile.0                 : mobile                : raspberrypi                              - disabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.sayit.0                  : sayit                 : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5000
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : raspberrypi                              -  enabled, port: 8088, bind: 192.168.2.4, run as: admin
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
  system.adapter.vis-bars.0               : vis-bars              : raspberrypi                              - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi                              - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspberrypi                              - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              - disabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              - disabled
  system.adapter.vis-players.0            : vis-players           : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspberrypi                              -  enabled
+ system.adapter.wifilight.0              : wifilight             : raspberrypi                              -  enabled
+ system.adapter.yahka.0                  : yahka                 : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.synology.0               : synology              : raspberrypi                              -  enabled, port: 5000
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : raspberrypi                              -  enabled, port: 8088, bind: 192.168.2.4, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00

ioBroker-Repositories
Beta (latest) : http://download.iobroker.net/sources-dist-latest.json
Stable (default): http://download.iobroker.net/sources-dist.json

Active repo(s): Stable (default)

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "admin"        : 6.12.0   , installed 6.12.0
Adapter    "alarm"        : 3.6.0    , installed 3.6.0
Adapter    "backitup"     : 2.9.8    , installed 2.9.8
Adapter    "broadlink2"   : 2.1.5    , installed 2.1.5
Adapter    "cloud"        : 4.4.1    , installed 4.4.1
Adapter    "discovery"    : 4.2.0    , installed 4.2.0
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.15.19  , installed 1.15.19
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "info"         : 2.0.0    , installed 2.0.0
Adapter    "javascript"   : 7.1.6    , installed 7.1.6
Controller "js-controller": 5.0.17   , installed 5.0.17
Adapter    "mobile"       : 1.0.1    , installed 1.0.1
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "shelly"       : 6.6.1    , installed 6.6.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.6.0    , installed 6.6.0
Adapter    "sonoff"       : 3.0.3    , installed 3.0.3
Adapter    "synology"     : 3.0.1    , installed 3.0.1
Adapter    "telegram"     : 3.0.1    , installed 1.16.0 [Updatable]
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vis"          : 1.5.4    , installed 1.5.4
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "web"          : 6.1.10   , installed 6.1.10
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "wifilight"    : 1.1.4    , installed 1.1.4
Adapter    "ws"           : 2.5.8    , installed 2.5.8
Adapter    "yahka"        : 1.0.3    , installed 1.0.3
Adapter    "zigbee"       : 1.10.1   , installed 1.9.7  [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        5503
States:         4905

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 1

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       18072      1133/io.sonoff.0
tcp        0      0 192.168.2.4:2010        0.0.0.0:*               LISTEN      1001       15234      1081/io.hm-rpc.1
tcp        0      0 192.168.2.4:2001        0.0.0.0:*               LISTEN      1001       18000      1057/io.hm-rpc.0
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          15659      783/cupsd
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       17317      784/iobroker.js-con
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       15044      784/iobroker.js-con
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14884      796/sshd: /usr/sbin
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       20375      1964/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15912      962/io.admin.0
tcp6       0      0 :::8088                 :::*                    LISTEN      1001       20131      1544/io.terminal.0
tcp6       0      0 :::37485                :::*                    LISTEN      1001       21491      2003/io.yahka.0
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          15658      783/cupsd
tcp6       0      0 :::22                   :::*                    LISTEN      0          14886      796/sshd: /usr/sbin
udp        0      0 0.0.0.0:41433           0.0.0.0:*                           1001       27228      3290/io.broadlink2.
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          14975      863/cups-browsed
udp        0      0 0.0.0.0:15001           0.0.0.0:*                           1001       28156      3290/io.broadlink2.
udp        0      0 0.0.0.0:52376           0.0.0.0:*                           1001       27229      3290/io.broadlink2.
udp        0      0 192.168.2.4:5353        0.0.0.0:*                           1001       16153      1165/io.tr-064.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        15556      523/avahi-daemon: r
udp        0      0 0.0.0.0:60813           0.0.0.0:*                           104        15558      523/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       18051      1106/io.shelly.0
udp6       0      0 :::39207                :::*                                104        15559      523/avahi-daemon: r
udp6       0      0 fe80::67d1:e1cb:7ef:546 :::*                                0          17307      664/NetworkManager
udp6       0      0 :::5353                 :::*                                104        15557      523/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-01-21 16:34:01.381  - warn: sonoff.0 (1133) Client [Muschel Terrasse] has invalid password or username
2024-01-21 16:34:01.418  - warn: sonoff.0 (1133) Client [Pavillon Beleuchtung] has invalid password or username
2024-01-21 16:34:01.764  - info: host.raspberrypi instance system.adapter.broadlink2.0 started with pid 3290
2024-01-21 16:34:02.379  - warn: sonoff.0 (1133) Client [Wohnzimmer-Vitrine] has invalid password or username
2024-01-21 16:34:02.422  - warn: sonoff.0 (1133) Client [Pool Beleuchtung] has invalid password or username
2024-01-21 16:34:02.488  - warn: sonoff.0 (1133) Client [PC-Buero] has invalid password or username
2024-01-21 16:34:05.121  - warn: sonoff.0 (1133) Client [Pool Pumpe] has invalid password or username
2024-01-21 16:34:06.343  - warn: shelly.0 (1106) [authEnabled] 192.168.2.214 (shellydimmer2 / shellydimmer2-8CAAB54C4B57 / SHDM-2#8CAAB54C4B57#1): This device is not protected via restricted login (see adapter documentation for details)
2024-01-21 16:34:07.510  - warn: shelly.0 (1106) [authEnabled] 192.168.2.180 (shellydimmer / shellydimmer-D3E918 / SHDM-1#D3E918#1): This device is not protected via restricted login (see adapter documentation for details)
2024-01-21 16:34:08.211  - info: broadlink2.0 (3290) starting. Version 2.1.5 in /opt/iobroker/node_modules/iobroker.broadlink2, node: v18.19.0, js-controller: 5.0.17
2024-01-21 16:34:07.671  - warn: shelly.0 (1106) [authEnabled] 192.168.2.226 (shellydimmer2 / shellydimmer2-8CAAB54C4E21 / SHDM-2#8CAAB54C4E21#1): This device is not protected via restricted login (see adapter documentation for details)
2024-01-21 16:34:07.683  - warn: shelly.0 (1106) State value to set for "shelly.0.SHDM-1#D3E918#1.temperatureF" has value "101.66" greater than max "100"
2024-01-21 16:34:08.481  - info: broadlink2.0 (3290) broadlink2 initialization started...
2024-01-21 16:34:08.486  - info: broadlink2.0 (3290) Scanning additional IP's: 192.168.2.169
2024-01-21 16:34:08.487  - info: broadlink2.0 (3290) Devices to add: 0xabcd=RM4
2024-01-21 16:34:08.489  - info: broadlink2.0 (3290) Devices to rename: LB:hostName-aa-bb-cc=LB:SmartBulb
2024-01-21 16:34:08.492  - info: broadlink2.0 (3290) broadlink2 has 3 old devices!
2024-01-21 16:34:08.497  - info: broadlink2.0 (3290) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255'
}:
2024-01-21 16:34:08.498  - info: broadlink2.0 (3290) macObjects: [ '24:df:a7:b1:1a:8d', 'a0:43:b0:14:80:2b', 'b4:43:0d:aa:80:31' ]
2024-01-21 16:34:08.502  - info: broadlink2.0 (3290) Discover Broadlink devices for 10sec on broadlink2.0
2024-01-21 16:34:08.590  - info: broadlink2.0 (3290) interface to be used: { netmaskBits: 24, address: '192.168.2.4/24', addrs: [ 192, 168, 2, 4 ], cidr: '192.168.2.4/24', bcaddr: '192.168.2.255'
}:
2024-01-21 16:34:08.593  - info: broadlink2.0 (3290) discover  [ '192.168.2.255', '255.255.255.255', '224.0.0.251' ] from 0.0.0.0:41433
2024-01-21 16:34:09.382  - info: broadlink2.0 (3290) Device RM:RMPRO-MOVE315-b1-1a-8d detected: address=192.168.2.169, mac=24:df:a7:b1:1a:8d, typ=RMP, id=0x27a9 devtype=RM3 Pro Plus



============ Mark until here for C&P =============

iob diag has finished.

======================= SUMMARY =======================
                        v.2023-10-10


 Static hostname: raspberrypi
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-rpi7-rpi-v8
    Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               arm64
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     1
Pending iob updates:    2

Nodejs-Installation:    /usr/bin/nodejs         v18.19.0
                        /usr/bin/node           v18.19.0
                        /usr/bin/npm            10.2.3
                        /usr/bin/npx            10.2.3
                        /usr/bin/corepack       0.22.0

Recommended versions are nodejs 18.19.0 and npm 10.2.3
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            4.0G        1.7G        1.6G        1.3M        765M        2.3G
Swap:           104M          0B        104M
Total:          4.1G        1.7G        1.7G

Active iob-Instances:   25
Active repo(s): Stable (default)

ioBroker Core:          js-controller           5.0.17
                        admin                   6.12.0

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                5503
States:                 4905

Size of iob-Database:

22M     /opt/iobroker/iobroker-data/objects.jsonl
5.3M    /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

PI@raspberrypi:~ $ iob logs | grep zigbee
2024-01-21 16:24:16.091  - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef87315 = false
2024-01-21 16:24:16.105  - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87315 = 0
2024-01-21 16:24:16.109  - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef8731e = false
2024-01-21 16:24:16.122  - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef8731e = 0
2024-01-21 16:24:16.127  - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef84d2d = false
2024-01-21 16:24:16.138  - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef84d2d = 0
2024-01-21 16:24:16.143  - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef87b6a = false
2024-01-21 16:24:16.148  - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef87b6a = 0
2024-01-21 16:24:16.152  - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xf4b3b1fffef853ac = false
2024-01-21 16:24:16.176  - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xf4b3b1fffef853ac = 0
2024-01-21 16:24:16.181  - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0x04cd15fffefe9ca8 = false
2024-01-21 16:24:16.185  - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0x04cd15fffefe9ca8 = 0
2024-01-21 16:24:16.191  - debug: zigbee.0 (2837) DeviceAvailability:Publish available for 0xa4c138c66404899e = false
2024-01-21 16:24:16.198  - debug: zigbee.0 (2837) DeviceAvailability:Publish LQ for 0xa4c138c66404899e = 0
2024-01-21 16:24:16.215  - info: zigbee.0 (2837) Zigbee: disabling joining new devices.
2024-01-21 16:24:19.977  - warn: zigbee.0 (2837) Failed to stop zigbee during startup
2024-01-21 16:24:20.282  - warn: host.raspberrypi instance system.adapter.zigbee.0 terminated due to SIGTERM
2024-01-21 16:24:20.282  - info: host.raspberrypi instance system.adapter.zigbee.0 terminated with code null ()
2024-01-21 16:30:15.740  - info: host.raspberrypi instance system.adapter.zigbee.0 started with pid 1209
2024-01-21 16:30:22.216  - debug: zigbee.0 (1209) Redis Objects: Use Redis connection: 127.0.0.1:9001
2024-01-21 16:30:22.270  - debug: zigbee.0 (1209) Objects client ready ... initialize now
2024-01-21 16:30:22.274  - debug: zigbee.0 (1209) Objects create System PubSub Client
2024-01-21 16:30:22.275  - debug: zigbee.0 (1209) Objects create User PubSub Client
2024-01-21 16:30:22.336  - debug: zigbee.0 (1209) Objects client initialize lua scripts
2024-01-21 16:30:22.348  - debug: zigbee.0 (1209) Objects connected to redis: 127.0.0.1:9001
2024-01-21 16:30:22.403  - debug: zigbee.0 (1209) Redis States: Use Redis connection: 127.0.0.1:9000
2024-01-21 16:30:22.433  - debug: zigbee.0 (1209) States create System PubSub Client
2024-01-21 16:30:22.435  - debug: zigbee.0 (1209) States create User PubSub Client
2024-01-21 16:30:22.509  - debug: zigbee.0 (1209) States connected to redis: 127.0.0.1:9000
2024-01-21 16:30:22.575  - debug: zigbee.0 (1209) Plugin sentry Initialize Plugin (enabled=true)
2024-01-21 16:30:23.292  - info: zigbee.0 (1209) starting. Version 1.9.7 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.19.0, js-controller: 5.0.17
2024-01-21 16:30:23.324  - debug: zigbee.0 (1209) Using zigbee-herdsman with settings: {"network":{"panID":6754,"extendedPanID":[221,221,221,221,221,221,221,221],"channelList":[11],"networkKey":[1,3,5,7,9,11,13,15,0,2,4,6,8,10,12,13]},"databasePath":"/opt/iobroker/iobroker-data/zigbee_0/shepherd.db","backupPath":"/opt/iobroker/iobroker-data/zigbee_0/nvbackup.json","serialPort":{"baudRate":115200,"rtscts":false,"path":"/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00","adapter":"zstack"},"adapter":{"forceStartWithInconsistentAdapterConfiguration":false},"legacy":false}
2024-01-21 16:30:23.412  - info: zigbee.0 (1209) delete old Backup files. keep only last 10
2024-01-21 16:30:23.414  - info: zigbee.0 (1209) Starting Zigbee  npm ...
2024-01-21 16:30:23.462  - debug: zigbee.0 (1209) Starting zigbee-herdsman...
2024-01-21 16:30:24.299  - error: zigbee.0 (1209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00'"
2024-01-21 16:30:24.300  - error: zigbee.0 (1209) Failed to start Zigbee
2024-01-21 16:30:24.300  - error: zigbee.0 (1209) Error herdsman start
2024-01-21 16:30:24.327  - info: zigbee.0 (1209) Installed Version: iobroker.zigbee@1.9.7
2024-01-21 16:30:24.887  - debug: zigbee.0 (1209) Backup /opt/iobroker/iobroker-data/zigbee_0/backup_2024_01_21-16_30_23.tar.gz success
2024-01-21 16:30:34.304  - info: zigbee.0 (1209) Try to reconnect. 1 attempts left
2024-01-21 16:30:34.305  - info: zigbee.0 (1209) Starting Zigbee  npm ...
2024-01-21 16:30:34.311  - debug: zigbee.0 (1209) Starting zigbee-herdsman...
2024-01-21 16:30:34.321  - error: zigbee.0 (1209) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0018E2F56A-if00'"
2024-01-21 16:30:34.323  - error: zigbee.0 (1209) Failed to start Zigbee
2024-01-21 16:30:34.323  - error: zigbee.0 (1209) Error herdsman start
2024-01-21 16:30:34.332  - info: zigbee.0 (1209) Installed Version: iobroker.zigbee@1.9.7
PI@raspberrypi:~ $ ^C

Thomas Braun

@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:

Trag beim Comport ein:


/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_8eb6f719a99ded11ad35dca5a7669f5d-if00-port0

Bei dir steht der alte Stick noch drin.

Und bring alles auf Stand.

sudo apt full-upgrade
iob update all

Tapdance 0

@thomas-braun

das Update hatte ich doch gestern schon angestoßen. Habe ich gerade noch mal angestoßen.

Wie ändere ich den Eintrag beim Comport?

Sorry bin kein kein Linux und Kommandozeilen Typ

Thomas Braun

@tapdance-0 sagte in Ziggbe sendet nicht mehr an empfängt aber noch Daten:

Wie ändere ich den Eintrag beim Comport?

In den Einstellungen des zigbee-Adapters. Ganz ohne Kommandozeile...

Community Forum

NEWS

Ziggbe sendet nicht mehr an empfängt aber noch Daten

Support us

341

32.8k

82.8k

1.3m