NEWS
Passwort Iobroker über Mac-Terminal anders?
Installation
133
Posts
11
Posters
16.1k
Views
9
Watching
-
@uliauer44 sagte in Passwort Iobroker über Mac-Terminal anders?:
Genau. Das versuche ich gerade ja irgendwie zu verbessern ....Danke für Eure Geduld!!!
Moin,
ok, das, was ich weiter vorne geschrieben habe, scheint ja nicht weiter verfolgt zu werden. Dann versuche ich das noch mal mit Allgemeinwissen
Dein
Macist auch nur ein UNIX, basierend auf einem BSD Derivat, welches nur um eine eigene grafische Umgebung erweitert wurde, wenn Du ein Terminal auf Deinem MAC öffnest, dann kannst Du da ja mal das eintippen# ls -la /Da sollte dann der Verzeichnisbaum des MACs auftauchen, auch beim MAC beginnt alles bei `/, allg. gibt es bei UNIX keine Laufwerksbuchstaben, wie z. B. bei KleinWeich, wo alles mit
- A: = Diskettenlaufwerk, äquivalent unter UNIX
/dev/fd0, das dann unter/mnt/floppyeingebunden wird - B: = zweites Diskettenlaufwerk, äquivalent unter UNIX
/dev/fd1, das dann z. B. unter/mnt/floppy_beingebunden wird 
erstes Festplattenlaufwerk, äquivalent unter UNIX /dev/sda1, das dann unter/eingebunden wird
zweites Festplattenlaufwerk, äquivalent unter UNIX /dev/sda2oder/dev/sdb1, das dann unter/homeeingebunden wird- ...
VG
Bernd@dp20eic said in Passwort Iobroker über Mac-Terminal anders?:
das, was ich weiter vorne geschrieben habe, scheint ja nicht weiter verfolgt zu werden.
Sorry, hatte ich überlesen....das mit dem PW-Reset check ich noch vor dem Neuaufsetzen.....muss aber erstmal einen Kartenadapter suchen....;-)
- A: = Diskettenlaufwerk, äquivalent unter UNIX
-
@uliauer44 sagte in Passwort Iobroker über Mac-Terminal anders?:
auf dem NAS
Was ist das für ein NAS?
Wenn das z.B. 'ne "fette" Synology mit ordentlich RAM ist, könnte man ioBroker als Docker-Container laufen lassen.
Bei tatsächlich "NULL" Ahnung wäre das eine Alternative. Entbindet den Anwender zumindest ein Stück weit von den Arbeiten "unter der Haube". Container wegwerfen, neuen drauf, fertig.@codierknecht sagte in Passwort Iobroker über Mac-Terminal anders?:
Bei tatsächlich "NULL" Ahnung wäre das eine Alternative.
eher nicht!!
-
So. Kann mich jetzt endlich mal wieder dem Thema widmen nach einigen Irrungen und Wirrungen im "sonstigen Leben....
Noch eine Frage: Werden mit BackitUp auch meine Blockly Skripte mit gesichert?
@uliauer44 sagte in Passwort Iobroker über Mac-Terminal anders?:
Noch eine Frage: Werden mit BackitUp auch meine Blockly Skripte mit gesichert?
Ja, wenn es entsprechend eingestellt ist.
-
@uliauer44 sagte in Passwort Iobroker über Mac-Terminal anders?:
Noch eine Frage: Werden mit BackitUp auch meine Blockly Skripte mit gesichert?
Ja, wenn es entsprechend eingestellt ist.
@thomas-braun sagte in Passwort Iobroker über Mac-Terminal anders?:
Ja, wenn es entsprechend eingestellt ist.
@uliauer44
einfach nur Ja!die zusätzliche Einstellung ist nur dazu da nur die Skripte alleine wiederherstellen zu können.
-
So. Nach einiger Zeit starte ich nochmal einen neuen Versuch.
UPDATE:
Mir ist es mittlerweile gelungen, das PW des Pi zurückzusetzen.
Dabei wurde auch nochmal klar, dass ich definitiv KEINEN user "pi" mehr auf dem System habe sondern dieser offensichtlich von mir damals bei der Erstinstallation in "iobroker" umbenannt worden war.
Kann aber nun sowohl auf "root" als auch auf "iobroker" (ist auch der user, den das Raspberry GUI verwendet, um z.B. Systemeinstellungen zu ändern) mit dem geänderten PW zugreifen.Dennoch ist es mir nach wie vor nicht möglich, ein js-controller Upgrade durchzuführen ;o(
Habe - mit Zugriff über Mac-Terminal per SSH beide Wege in den Upgrade-Anleitungen ausprobiert
a) Linux / macOS (neuer Installer - "curl shell installation script")
b) Linux / macOS (manuell installiert)
Dabei ist sowohl der Fixer gescheitert als auch das eigentliche Upgrade.
Hier mal die Terminalversuche im Detail:
ulimaxbook@MBP-von-Uli ~ % ssh iobroker@192.168.178.22 iobroker@192.168.178.22's password: Linux iobroker 5.15.61-v8+ #1579 SMP PREEMPT Fri Aug 26 11:16:44 BST 2022 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Oct 23 16:25:32 2024 iobroker@iobroker:~ $ sudo iobroker stop [sudo] Passwort f?r iobroker: iobroker@iobroker:~ $ sudo iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ sudo iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.15.0 Installing iobroker.js-controller@6.0.11... (System call) iobroker@iobroker:~ $ sudo iobroker start iobroker@iobroker:~ $ iobroker stop iobroker@iobroker:~ $ iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ iobroker fix It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) library: loaded Library version=2024-10-22 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-10-22 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://deb.debian.org/debian bullseye-updates InRelease OK:3 http://security.debian.org/debian-security bullseye-security InRelease OK:4 http://archive.raspberrypi.org/debian bullseye InRelease OK:5 https://deb.nodesource.com/node_16.x bullseye InRelease Paketlisten werden gelesen... Fertig Trigger f?r man-db (2.9.4-2) werden verarbeitet ...deb11u1_arm64.deb ...iert.) Installed distro-info E: Paket polkitd kann nicht gefunden werden. Installed polkitd ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== iobroker@iobroker:~ $ iobroker start iobroker@iobroker:~ $ iobroker stop iobroker@iobroker:~ $ iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ iobroker fix It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Enter the username for a new user (Not 'root' and not 'iobroker'!): iobrokernew Enter the password for the new user: Confirm the password for the new user: Adding new user account... useradd: Permission denied. useradd: /etc/passwd konnte nicht gesperrt werden; versuchen Sie es sp?ter noch einmal. chpasswd: (user iobrokernew) pam_chauthtok() failed, error: Fehler beim ?ndern des Authentifizierungstoken chpasswd: (Zeile 1, Benutzer iobrokernew) Passwort nicht ge?ndert Please login with this newly created user account and restart the fixer. iobroker@iobroker:~ $ iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.15.0 Installing iobroker.js-controller@6.0.11... (System call) iobroker@iobroker:~ $ iobroker start iobroker@iobroker:~ $Nach dem Neustart des ioB ist nach wie vor nix passiert bzw. immer noch js 4.0.23 installiert...
Wat nu?
-
So. Nach einiger Zeit starte ich nochmal einen neuen Versuch.
UPDATE:
Mir ist es mittlerweile gelungen, das PW des Pi zurückzusetzen.
Dabei wurde auch nochmal klar, dass ich definitiv KEINEN user "pi" mehr auf dem System habe sondern dieser offensichtlich von mir damals bei der Erstinstallation in "iobroker" umbenannt worden war.
Kann aber nun sowohl auf "root" als auch auf "iobroker" (ist auch der user, den das Raspberry GUI verwendet, um z.B. Systemeinstellungen zu ändern) mit dem geänderten PW zugreifen.Dennoch ist es mir nach wie vor nicht möglich, ein js-controller Upgrade durchzuführen ;o(
Habe - mit Zugriff über Mac-Terminal per SSH beide Wege in den Upgrade-Anleitungen ausprobiert
a) Linux / macOS (neuer Installer - "curl shell installation script")
b) Linux / macOS (manuell installiert)
Dabei ist sowohl der Fixer gescheitert als auch das eigentliche Upgrade.
Hier mal die Terminalversuche im Detail:
ulimaxbook@MBP-von-Uli ~ % ssh iobroker@192.168.178.22 iobroker@192.168.178.22's password: Linux iobroker 5.15.61-v8+ #1579 SMP PREEMPT Fri Aug 26 11:16:44 BST 2022 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Oct 23 16:25:32 2024 iobroker@iobroker:~ $ sudo iobroker stop [sudo] Passwort f?r iobroker: iobroker@iobroker:~ $ sudo iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ sudo iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.15.0 Installing iobroker.js-controller@6.0.11... (System call) iobroker@iobroker:~ $ sudo iobroker start iobroker@iobroker:~ $ iobroker stop iobroker@iobroker:~ $ iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ iobroker fix It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) library: loaded Library version=2024-10-22 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-10-22 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://deb.debian.org/debian bullseye-updates InRelease OK:3 http://security.debian.org/debian-security bullseye-security InRelease OK:4 http://archive.raspberrypi.org/debian bullseye InRelease OK:5 https://deb.nodesource.com/node_16.x bullseye InRelease Paketlisten werden gelesen... Fertig Trigger f?r man-db (2.9.4-2) werden verarbeitet ...deb11u1_arm64.deb ...iert.) Installed distro-info E: Paket polkitd kann nicht gefunden werden. Installed polkitd ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== iobroker@iobroker:~ $ iobroker start iobroker@iobroker:~ $ iobroker stop iobroker@iobroker:~ $ iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ iobroker fix It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Enter the username for a new user (Not 'root' and not 'iobroker'!): iobrokernew Enter the password for the new user: Confirm the password for the new user: Adding new user account... useradd: Permission denied. useradd: /etc/passwd konnte nicht gesperrt werden; versuchen Sie es sp?ter noch einmal. chpasswd: (user iobrokernew) pam_chauthtok() failed, error: Fehler beim ?ndern des Authentifizierungstoken chpasswd: (Zeile 1, Benutzer iobrokernew) Passwort nicht ge?ndert Please login with this newly created user account and restart the fixer. iobroker@iobroker:~ $ iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.15.0 Installing iobroker.js-controller@6.0.11... (System call) iobroker@iobroker:~ $ iobroker start iobroker@iobroker:~ $Nach dem Neustart des ioB ist nach wie vor nix passiert bzw. immer noch js 4.0.23 installiert...
Wat nu?
-
So. Nach einiger Zeit starte ich nochmal einen neuen Versuch.
UPDATE:
Mir ist es mittlerweile gelungen, das PW des Pi zurückzusetzen.
Dabei wurde auch nochmal klar, dass ich definitiv KEINEN user "pi" mehr auf dem System habe sondern dieser offensichtlich von mir damals bei der Erstinstallation in "iobroker" umbenannt worden war.
Kann aber nun sowohl auf "root" als auch auf "iobroker" (ist auch der user, den das Raspberry GUI verwendet, um z.B. Systemeinstellungen zu ändern) mit dem geänderten PW zugreifen.Dennoch ist es mir nach wie vor nicht möglich, ein js-controller Upgrade durchzuführen ;o(
Habe - mit Zugriff über Mac-Terminal per SSH beide Wege in den Upgrade-Anleitungen ausprobiert
a) Linux / macOS (neuer Installer - "curl shell installation script")
b) Linux / macOS (manuell installiert)
Dabei ist sowohl der Fixer gescheitert als auch das eigentliche Upgrade.
Hier mal die Terminalversuche im Detail:
ulimaxbook@MBP-von-Uli ~ % ssh iobroker@192.168.178.22 iobroker@192.168.178.22's password: Linux iobroker 5.15.61-v8+ #1579 SMP PREEMPT Fri Aug 26 11:16:44 BST 2022 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Oct 23 16:25:32 2024 iobroker@iobroker:~ $ sudo iobroker stop [sudo] Passwort f?r iobroker: iobroker@iobroker:~ $ sudo iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ sudo iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.15.0 Installing iobroker.js-controller@6.0.11... (System call) iobroker@iobroker:~ $ sudo iobroker start iobroker@iobroker:~ $ iobroker stop iobroker@iobroker:~ $ iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ iobroker fix It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) library: loaded Library version=2024-10-22 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-10-22 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://deb.debian.org/debian bullseye-updates InRelease OK:3 http://security.debian.org/debian-security bullseye-security InRelease OK:4 http://archive.raspberrypi.org/debian bullseye InRelease OK:5 https://deb.nodesource.com/node_16.x bullseye InRelease Paketlisten werden gelesen... Fertig Trigger f?r man-db (2.9.4-2) werden verarbeitet ...deb11u1_arm64.deb ...iert.) Installed distro-info E: Paket polkitd kann nicht gefunden werden. Installed polkitd ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== iobroker@iobroker:~ $ iobroker start iobroker@iobroker:~ $ iobroker stop iobroker@iobroker:~ $ iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ iobroker fix It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Enter the username for a new user (Not 'root' and not 'iobroker'!): iobrokernew Enter the password for the new user: Confirm the password for the new user: Adding new user account... useradd: Permission denied. useradd: /etc/passwd konnte nicht gesperrt werden; versuchen Sie es sp?ter noch einmal. chpasswd: (user iobrokernew) pam_chauthtok() failed, error: Fehler beim ?ndern des Authentifizierungstoken chpasswd: (Zeile 1, Benutzer iobrokernew) Passwort nicht ge?ndert Please login with this newly created user account and restart the fixer. iobroker@iobroker:~ $ iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.15.0 Installing iobroker.js-controller@6.0.11... (System call) iobroker@iobroker:~ $ iobroker start iobroker@iobroker:~ $Nach dem Neustart des ioB ist nach wie vor nix passiert bzw. immer noch js 4.0.23 installiert...
Wat nu?
@uliauer44 sagte in Passwort Iobroker über Mac-Terminal anders?:
Wat nu?
Mach den ganzen Bums neu. Was bedeuten denn diese riesen Zeitunterschiede, offenbar hast du generell kein Interesse, warum sollte jemand da helfen wollen?
-
So. Nach einiger Zeit starte ich nochmal einen neuen Versuch.
UPDATE:
Mir ist es mittlerweile gelungen, das PW des Pi zurückzusetzen.
Dabei wurde auch nochmal klar, dass ich definitiv KEINEN user "pi" mehr auf dem System habe sondern dieser offensichtlich von mir damals bei der Erstinstallation in "iobroker" umbenannt worden war.
Kann aber nun sowohl auf "root" als auch auf "iobroker" (ist auch der user, den das Raspberry GUI verwendet, um z.B. Systemeinstellungen zu ändern) mit dem geänderten PW zugreifen.Dennoch ist es mir nach wie vor nicht möglich, ein js-controller Upgrade durchzuführen ;o(
Habe - mit Zugriff über Mac-Terminal per SSH beide Wege in den Upgrade-Anleitungen ausprobiert
a) Linux / macOS (neuer Installer - "curl shell installation script")
b) Linux / macOS (manuell installiert)
Dabei ist sowohl der Fixer gescheitert als auch das eigentliche Upgrade.
Hier mal die Terminalversuche im Detail:
ulimaxbook@MBP-von-Uli ~ % ssh iobroker@192.168.178.22 iobroker@192.168.178.22's password: Linux iobroker 5.15.61-v8+ #1579 SMP PREEMPT Fri Aug 26 11:16:44 BST 2022 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Oct 23 16:25:32 2024 iobroker@iobroker:~ $ sudo iobroker stop [sudo] Passwort f?r iobroker: iobroker@iobroker:~ $ sudo iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ sudo iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.15.0 Installing iobroker.js-controller@6.0.11... (System call) iobroker@iobroker:~ $ sudo iobroker start iobroker@iobroker:~ $ iobroker stop iobroker@iobroker:~ $ iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ iobroker fix It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Your system is booting into 'graphical.target', which means that a user interface or desktop is available. Usually a server is running without a desktop to have more RAM available. Do you want to switch to 'multi-user.target'? (y/N) library: loaded Library version=2024-10-22 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2024-10-22 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/5) ========================================================================== OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://deb.debian.org/debian bullseye-updates InRelease OK:3 http://security.debian.org/debian-security bullseye-security InRelease OK:4 http://archive.raspberrypi.org/debian bullseye InRelease OK:5 https://deb.nodesource.com/node_16.x bullseye InRelease Paketlisten werden gelesen... Fertig Trigger f?r man-db (2.9.4-2) werden verarbeitet ...deb11u1_arm64.deb ...iert.) Installed distro-info E: Paket polkitd kann nicht gefunden werden. Installed polkitd ========================================================================== Checking ioBroker user and directory permissions (2/5) ========================================================================== Fixing directory permissions... ========================================================================== Check and cleanup npm temporary directories (3/5) ========================================================================== Done. ========================================================================== Database maintenance (4/5) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (5/5) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== iobroker@iobroker:~ $ iobroker start iobroker@iobroker:~ $ iobroker stop iobroker@iobroker:~ $ iobroker update Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] iobroker@iobroker:~ $ iobroker fix It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Enter the username for a new user (Not 'root' and not 'iobroker'!): iobrokernew Enter the password for the new user: Confirm the password for the new user: Adding new user account... useradd: Permission denied. useradd: /etc/passwd konnte nicht gesperrt werden; versuchen Sie es sp?ter noch einmal. chpasswd: (user iobrokernew) pam_chauthtok() failed, error: Fehler beim ?ndern des Authentifizierungstoken chpasswd: (Zeile 1, Benutzer iobrokernew) Passwort nicht ge?ndert Please login with this newly created user account and restart the fixer. iobroker@iobroker:~ $ iobroker upgrade self Update js-controller from @4.0.23 to @6.0.11 Stopped Objects DB Stopped States DB NPM version: 8.15.0 Installing iobroker.js-controller@6.0.11... (System call) iobroker@iobroker:~ $ iobroker start iobroker@iobroker:~ $Nach dem Neustart des ioB ist nach wie vor nix passiert bzw. immer noch js 4.0.23 installiert...
Wat nu?
Eigentlich steht es doch da
It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Enter the username for a new user (Not 'root' and not 'iobroker'!): iobrokernew Enter the password for the new user: Confirm the password for the new user: Adding new user account... useradd: Permission denied. useradd: /etc/passwd konnte nicht gesperrt werden; versuchen Sie es sp?ter noch einmal. chpasswd: (user iobrokernew) pam_chauthtok() failed, error: Fehler beim ?ndern des Authentifizierungstoken chpasswd: (Zeile 1, Benutzer iobrokernew) Passwort nicht ge?ndert Please login with this newly created user account and restart the fixer.User Iobroker ist fu Aktualisierung nicht erlaubt.
Die Anlage eines neuen Users ist fehlgeschlagen,
Wahrscheinlich weil der User Iobroker nicht zur Gruppe der Administratoren gehört.
Ich würde vorschlagen, du machst vom ioBroker Ein Back-up,
Installierst den Raspberry komplett noch mal von Grund auf neu,
Dann gibt es auch den User pi
Dann den ioBroker neu installieren und das Back-up wieder einspielen. Fertig.
Das ist jetzt unnötiges herum doktern -
Eigentlich steht es doch da
It seems you run ioBroker as root or the iobroker user. This is not recommended. For security reasons a default user should be created. This user will be enabled to temporarily switch to root via 'sudo'. A root login is not required in most Linux Distributions. Do you want to setup a user now? (y/N) Enter the username for a new user (Not 'root' and not 'iobroker'!): iobrokernew Enter the password for the new user: Confirm the password for the new user: Adding new user account... useradd: Permission denied. useradd: /etc/passwd konnte nicht gesperrt werden; versuchen Sie es sp?ter noch einmal. chpasswd: (user iobrokernew) pam_chauthtok() failed, error: Fehler beim ?ndern des Authentifizierungstoken chpasswd: (Zeile 1, Benutzer iobrokernew) Passwort nicht ge?ndert Please login with this newly created user account and restart the fixer.User Iobroker ist fu Aktualisierung nicht erlaubt.
Die Anlage eines neuen Users ist fehlgeschlagen,
Wahrscheinlich weil der User Iobroker nicht zur Gruppe der Administratoren gehört.
Ich würde vorschlagen, du machst vom ioBroker Ein Back-up,
Installierst den Raspberry komplett noch mal von Grund auf neu,
Dann gibt es auch den User pi
Dann den ioBroker neu installieren und das Back-up wieder einspielen. Fertig.
Das ist jetzt unnötiges herum doktern@oliverio sagte in Passwort Iobroker über Mac-Terminal anders?:
Installierst den Raspberry komplett noch mal von Grund auf neu,
Dann gibt es auch den User piNee, man soll ja mittlerweile einen individuellen User anlegen. Aber auch nicht 'iobroker'.
Der eigene Vorname oder der Forumsnick bietet sich da an.Wahrscheinlich weil der User Iobroker nicht zur Gruppe der Administratoren gehört.
Nein, im Code für die Neuanlage eines Users ist ein Bug drin.
-
@oliverio sagte in Passwort Iobroker über Mac-Terminal anders?:
Installierst den Raspberry komplett noch mal von Grund auf neu,
Dann gibt es auch den User piNee, man soll ja mittlerweile einen individuellen User anlegen. Aber auch nicht 'iobroker'.
Der eigene Vorname oder der Forumsnick bietet sich da an.Wahrscheinlich weil der User Iobroker nicht zur Gruppe der Administratoren gehört.
Nein, im Code für die Neuanlage eines Users ist ein Bug drin.
ok wenn man ,mag.
Aber dieser Zustand ist blöd. Da weiß man ja gar nicht was sonst noch alles gemacht wurde.
Dann lieber Grundzustand erstmal herstellen -
@thomas-braun said in Passwort Iobroker über Mac-Terminal anders?:
iob diag
Here it comes....
========== Start marking the full check here =========== ```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.61-v8+ Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 14:55:01 up 1 day, 22:27, 3 users, load average: 0.58, 0.62, 0.34 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian Release codenamed 'bullseye' reached its END OF LIFE and needs to be updated to the latest stable release '' NOW! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2024-10-25 14:55:01 CEST Universal time: Fri 2024-10-25 12:55:01 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iobroker HOME=/home/iobroker GROUPS=iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker adm tty dialout cdrom sudo audio video plugdev games users input render netdev bluetooth lpadmin gpio i2c spi A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'! A root login is not required in most Linux Distributions. Run 'iobroker fix' or use the system tools to create a user. *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 1.8G 1.4G 236M 34M 216M 349M Swap: 99M 99M 0.0K Total: 1.9G 1.5G 236M Active iob-Instances: 20 1849 M total memory 1396 M used memory 168 M active memory 1283 M inactive memory 236 M free memory 27 M buffer memory 189 M swap cache 99 M total swap 99 M used swap 0 M free swap *** top - Table Of Processes *** top - 14:55:02 up 1 day, 22:27, 3 users, load average: 0.58, 0.62, 0.34 Tasks: 209 total, 1 running, 208 sleeping, 0 stopped, 0 zombie %Cpu(s): 13.9 us, 6.9 sy, 0.0 ni, 79.2 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 1849.2 total, 235.6 free, 1395.8 used, 217.8 buff/cache MiB Swap: 100.0 total, 0.0 free, 100.0 used. 348.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** [sudo] password for iobroker: No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 7.1G 6.5G 53% / devtmpfs devtmpfs 763M 0 763M 0% /dev tmpfs tmpfs 925M 0 925M 0% /dev/shm tmpfs tmpfs 370M 1.2M 369M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 255M 34M 222M 13% /boot tmpfs tmpfs 185M 20K 185M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Oct 23 16:27:32 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:26:FE:1A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=bbc14122-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Oct 23 16:27:33 2024] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Wed Oct 23 16:27:33 2024] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Wed Oct 23 16:27:33 2024] EXT4-fs (mmcblk0p2): recovery complete [Wed Oct 23 16:27:33 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Wed Oct 23 16:27:33 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Oct 23 16:27:35 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.5G /var/log/journal/60dd197ce1dd470bacf92c92630f1c5a 1.5G /var/log/journal 1.5G /var/log 184M /var/lib Archived and active journals take up 1.4G in the file system. /opt/iobroker/backups: 279M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 378M /opt/iobroker/iobroker-data/ 298M /opt/iobroker/iobroker-data/files 99M /opt/iobroker/iobroker-data/files/vis-2-beta 52M /opt/iobroker/iobroker-data/files/javascript.admin 47M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 27M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 9.7M /opt/iobroker/iobroker-data/files/vis-2-beta/material-icons/knx-uf.json 8.5M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js 8.0M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** nodejs: N/A /usr/bin/node v16.17.0 /usr/bin/npm 8.15.0 /usr/bin/npx 8.15.0 /usr/bin/corepack 0.12.1 *** nodejs is NOT correctly installed *** nodejs: Installed: 16.17.0-deb-1nodesource1 Candidate: 16.20.2-deb-1nodesource1 Version table: 16.20.2-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main arm64 Packages *** 16.17.0-deb-1nodesource1 100 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u5 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u4 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker iobroker (version: 4.0.23, hostname: iobroker , alive, uptime: 165159) Core adapters versions js-controller: 4.0.23 admin: 6.13.16 javascript: 7.1.4 nodejs modules from github: 2 | +-- samsungtv@0.0.0 (git+https://git@github.com/luca-saggese/samsungtv.git#7fc20107455414e2afb94022682e0787e8635550) +-- iobroker.vis-materialdesign@0.5.94 (git+ssh://git@github.com/Scrounger/ioBroker.vis-materialdesign.git#8b7529d493f223dfc4f1d1f632553fcb35bbcc92) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.denon.0 : denon : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled system.adapter.habpanel.0 : habpanel : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 system.adapter.hm-rpc.3 : hm-rpc : iobroker - disabled, port: 0 system.adapter.hue-extended.0 : hue-extended : iobroker - disabled + system.adapter.hue.0 : hue : iobroker - enabled, port: 443 system.adapter.ical.0 : ical : iobroker - disabled + system.adapter.jarvis.0 : jarvis : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.openweathermap.0 : openweathermap : iobroker - enabled + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.samsung.0 : samsung : iobroker - enabled + system.adapter.terminal.0 : terminal : iobroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin system.adapter.vis-2-beta.0 : vis-2-beta : iobroker - disabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : iobroker - enabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : iobroker - enabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker - enabled system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker - enabled system.adapter.vis.0 : vis : iobroker - disabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hue.0 : hue : iobroker - enabled, port: 443 + system.adapter.terminal.0 : terminal : iobroker - enabled, port: 8088, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 6.13.16 [Updatable] Adapter "backitup" : 3.0.25 , installed 2.11.0 [Updatable] Adapter "denon" : 1.15.12 , installed 1.15.5 [Updatable] Adapter "discovery" : 5.0.0 , installed 4.4.0 [Updatable] Adapter "fritzdect" : 2.5.11 , installed 2.5.9 [Updatable] Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "hm-rega" : 5.1.0 , installed 4.0.0 [Updatable] Adapter "hm-rpc" : 2.0.2 , installed 1.17.0 [Updatable] Adapter "hue" : 3.12.0 , installed 3.10.1 [Updatable] Adapter "ical" : 1.15.0 , installed 1.13.3 [Updatable] Adapter "jarvis" : 3.1.8 , installed 3.1.8 Adapter "javascript" : 8.8.3 , installed 7.1.4 [Updatable] Controller "js-controller": 6.0.11 , installed 4.0.23 [Updatable] Adapter "openweathermap": 1.1.2 , installed 1.0.4 [Updatable] Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 4.1.0 , installed 3.0.6 [Updatable] Adapter "samsung" : 0.6.1 , installed 0.5.11 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.5.5 [Updatable] Adapter "terminal" : 1.0.0 , installed 1.0.0 Adapter "vis" : 1.5.6 , installed 1.5.4 [Updatable] Adapter "vis-2-widgets-energy": 1.0.2, installed 0.3.11 [Updatable] Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.0.3 [Updatable] Adapter "vis-2-widgets-material": 1.4.10, installed 1.3.25 [Updatable] Adapter "vis-inventwo" : 3.3.4 , installed 3.3.3 [Updatable] Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.1 [Updatable] Adapter "yahka" : 1.0.3 , installed 1.0.3 Adapter "zigbee" : 1.10.3 , installed 1.8.24 [Updatable] Objects and States Please stand by - This may take a while Objects: 6827 States: 5615 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian bullseye InRelease Hit:2 http://deb.debian.org/debian bullseye-updates InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease Reading package lists... Pending Updates: 325 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.22:9292 0.0.0.0:* LISTEN 1000 45177 6369/io.hm-rpc.1 tcp 0 0 192.168.178.22:2010 0.0.0.0:* LISTEN 1000 45202 6386/io.hm-rpc.2 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 43296 6175/iobroker.js-co tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 42823 6175/iobroker.js-co tcp 0 0 192.168.178.22:2001 0.0.0.0:* LISTEN 1000 41943 6322/io.hm-rpc.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 866244 82966/cupsd tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1000 46259 6524/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11603 571/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1000 40887 6193/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1000 46229 6479/io.web.0 tcp6 0 0 :::8088 :::* LISTEN 1000 45400 6535/io.terminal.0 tcp6 0 0 ::1:631 :::* LISTEN 0 866243 82966/cupsd tcp6 0 0 :::34957 :::* LISTEN 1000 43687 6494/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 11605 571/sshd: /usr/sbin udp 0 0 0.0.0.0:631 0.0.0.0:* 0 868513 82968/cups-browsed udp 0 0 0.0.0.0:52180 0.0.0.0:* 108 14204 340/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13063 468/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14202 340/avahi-daemon: r udp6 0 0 :::44790 :::* 108 14205 340/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14203 340/avahi-daemon: r udp6 0 0 :::546 :::* 0 13290 468/dhcpcd *** Log File - Last 25 Lines *** 2024-10-25 14:55:48.028 - error: hue.0 (6272) Could not poll all: unauthorized user 2024-10-25 14:55:48.559 - info: hue.0 (6272) Push connection error: Forbidden 2024-10-25 14:55:48.710 - error: hue.0 (6272) unauthorized user 2024-10-25 14:55:48.711 - warn: hue.0 (6272) Could not get configuration from HUE bridge (192.168.178.111:443) 2024-10-25 14:55:53.984 - info: hue.0 (6272) Push connection error: Forbidden 2024-10-25 14:55:54.197 - error: hue.0 (6272) unauthorized user 2024-10-25 14:55:54.198 - warn: hue.0 (6272) Could not get configuration from HUE bridge (192.168.178.111:443) 2024-10-25 14:55:58.048 - error: hue.0 (6272) Could not poll all: unauthorized user 2024-10-25 14:55:59.487 - info: hue.0 (6272) Push connection error: Forbidden 2024-10-25 14:55:59.647 - error: hue.0 (6272) unauthorized user 2024-10-25 14:55:59.647 - warn: hue.0 (6272) Could not get configuration from HUE bridge (192.168.178.111:443) 2024-10-25 14:56:04.949 - info: hue.0 (6272) Push connection error: Forbidden 2024-10-25 14:56:05.098 - error: hue.0 (6272) unauthorized user 2024-10-25 14:56:05.098 - warn: hue.0 (6272) Could not get configuration from HUE bridge (192.168.178.111:443) 2024-10-25 14:56:08.066 - error: hue.0 (6272) Could not poll all: unauthorized user 2024-10-25 14:56:10.395 - info: hue.0 (6272) Push connection error: Forbidden 2024-10-25 14:56:10.552 - error: hue.0 (6272) unauthorized user 2024-10-25 14:56:10.553 - warn: hue.0 (6272) Could not get configuration from HUE bridge (192.168.178.111:443) 2024-10-25 14:56:15.848 - info: hue.0 (6272) Push connection error: Forbidden 2024-10-25 14:56:15.996 - error: hue.0 (6272) unauthorized user 2024-10-25 14:56:15.996 - warn: hue.0 (6272) Could not get configuration from HUE bridge (192.168.178.111:443) 2024-10-25 14:56:18.081 - error: hue.0 (6272) Could not poll all: unauthorized user 2024-10-25 14:56:21.282 - info: hue.0 (6272) Push connection error: Forbidden 2024-10-25 14:56:21.441 - error: hue.0 (6272) unauthorized user 2024-10-25 14:56:21.448 - warn: hue.0 (6272) Could not get configuration from HUE bridge (192.168.178.111:443)============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Hier noch die anschließende Summary:Copy text starting here:
======================= SUMMARY ======================= v.2024-10-19 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 5.15.61-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 Display-Server: false Boot Target: graphical.target Pending OS-Updates: 325 Pending iob updates: 22 Nodejs-Installation: nodejs: N/A /usr/bin/node v16.17.0 /usr/bin/npm 8.15.0 /usr/bin/npx 8.15.0 /usr/bin/corepack 0.12.1 Recommended versions are nodejs 18.20.4 and npm 10.7.0 *** nodejs is NOT correctly installed *** Wrong installation path detected. This needs to be fixed. Please execute iob nodejs-update to fix these errors. MEMORY: total used free shared buff/cache available Mem: 1.8G 1.4G 135M 35M 300M 332M Swap: 99M 99M 0B Total: 1.9G 1.5G 135M Active iob-Instances: 20 Active repo(s): stable ioBroker Core: js-controller 4.0.23 admin 6.13.16 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 6827 States: 5615 Size of iob-Database: 27M /opt/iobroker/iobroker-data/objects.jsonl 8.1M /opt/iobroker/iobroker-data/states.jsonl Debian Release codenamed 'bullseye' reached its END OF LIFE and needs to be updated to the latest stable release '' NOW! =================== END OF SUMMARY ======================= Mark text until here for copying ===
iobroker@iobroker:~ $@Meister-Mopper : Sehr hilfreicher Kommentar....weil ich auch andere Dinge im Leben zu tun habe.... -
Bring das Ding auf Stand...
iob nodejs-update iob stop sudo apt update sudo apt full-upgrade sudo rebootUnd leg dir einen User an.
-
Bring das Ding auf Stand...
iob nodejs-update iob stop sudo apt update sudo apt full-upgrade sudo rebootUnd leg dir einen User an.
@thomas-braun
Ja, den Hinweis mit dem NodeJS habe ich auch gesehen - Update läuft gerade... -
@thomas-braun
Ja, den Hinweis mit dem NodeJS habe ich auch gesehen - Update läuft gerade...So. NodeJS Update hat geklappt - auch die anderen Update/Upgrade Befehle habe ich ausgeführt.
Danke schonmal, Thomas, für Deine Hilfe!
Leider immer noch kein aktualisierter JS-Controller im Host sichtbar.Wie meinst Du das genau mit dem neuen User? Und zum Verständnis: Was ist das Problem mit dem bisherigen?
(Und ja, ich sollte ja nach Anleitung damals einen neuen User anlegen, der "pi" offensichtlich ersetzt hat...)Soll ich das mit dem gefixten NodeJS einfach nochmal probieren mit der JS-Controller Update-Routine?
Oder ist die eh identisch mit den Upgrade-Zeilen, die Du mir geschrieben hast? -
So. NodeJS Update hat geklappt - auch die anderen Update/Upgrade Befehle habe ich ausgeführt.
Danke schonmal, Thomas, für Deine Hilfe!
Leider immer noch kein aktualisierter JS-Controller im Host sichtbar.Wie meinst Du das genau mit dem neuen User? Und zum Verständnis: Was ist das Problem mit dem bisherigen?
(Und ja, ich sollte ja nach Anleitung damals einen neuen User anlegen, der "pi" offensichtlich ersetzt hat...)Soll ich das mit dem gefixten NodeJS einfach nochmal probieren mit der JS-Controller Update-Routine?
Oder ist die eh identisch mit den Upgrade-Zeilen, die Du mir geschrieben hast? -
@thomas-braun ```
Copy text starting here:======================= SUMMARY ======================= v.2024-10-19 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 Display-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 22 Nodejs-Installation: /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 Recommended versions are nodejs 18.20.4 and npm 10.7.0 nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 1.8G 1.1G 127M 37M 577M 600M Swap: 99M 5.0M 94M Total: 1.9G 1.1G 222M Active iob-Instances: 20 Active repo(s): stable ioBroker Core: js-controller 4.0.23 admin 6.13.16 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 6827 States: 5617 Size of iob-Database: 27M /opt/iobroker/iobroker-data/objects.jsonl 1.9M /opt/iobroker/iobroker-data/states.jsonl Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! =================== END OF SUMMARY ==================== -
@thomas-braun ```
Copy text starting here:======================= SUMMARY ======================= v.2024-10-19 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 Display-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 22 Nodejs-Installation: /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 Recommended versions are nodejs 18.20.4 and npm 10.7.0 nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 1.8G 1.1G 127M 37M 577M 600M Swap: 99M 5.0M 94M Total: 1.9G 1.1G 222M Active iob-Instances: 20 Active repo(s): stable ioBroker Core: js-controller 4.0.23 admin 6.13.16 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 6827 States: 5617 Size of iob-Database: 27M /opt/iobroker/iobroker-data/objects.jsonl 1.9M /opt/iobroker/iobroker-data/states.jsonl Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! =================== END OF SUMMARY ====================iob update iob upgrade all -y iob stop iob upgrade self iob start -
iob update iob upgrade all -y iob stop iob upgrade self iob startSUPER. Herzlichen Dank, Thomas - scheint soweit nun alles geklappt zu haben.
Bei der ersten Runde von "iob upgrade all -y" hatte er noch einige Fehlermeldungen bezüglich der zu alten Version von JS-controller,
nach "upgrade self" hat er diesen aber nun auch brav auf 6.0.11 aktualisiert....!Sollte ich nun trotzdem noch eine neuen User anlegen? Oder ist das jetzt obsolet?
Hier nochmal die aktuellste Summary von "iob diag":
======================= SUMMARY ======================= v.2024-10-19 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 Display-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 Recommended versions are nodejs 20.18.0 and npm 10.8.2 nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 1.8G 1.2G 97M 38M 507M 498M Swap: 99M 99M 0.0K Total: 1.9G 1.3G 97M Active iob-Instances: 20 Upgrade policy: none ioBroker Core: js-controller 6.0.11 admin 7.1.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 6881 States: 5625 Size of iob-Database: 29M /opt/iobroker/iobroker-data/objects.jsonl 4.5M /opt/iobroker/iobroker-data/states.jsonl Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! =================== END OF SUMMARY ====================Was ja immer noch geblieben ist, ist die bullseye/bookworm Meldung.....Was mach ich damit?
-
SUPER. Herzlichen Dank, Thomas - scheint soweit nun alles geklappt zu haben.
Bei der ersten Runde von "iob upgrade all -y" hatte er noch einige Fehlermeldungen bezüglich der zu alten Version von JS-controller,
nach "upgrade self" hat er diesen aber nun auch brav auf 6.0.11 aktualisiert....!Sollte ich nun trotzdem noch eine neuen User anlegen? Oder ist das jetzt obsolet?
Hier nochmal die aktuellste Summary von "iob diag":
======================= SUMMARY ======================= v.2024-10-19 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Installation: native Kernel: aarch64 Userland: 64 bit Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 Display-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Pending iob updates: 0 Nodejs-Installation: /usr/bin/nodejs v20.18.0 /usr/bin/node v20.18.0 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.3 Recommended versions are nodejs 20.18.0 and npm 10.8.2 nodeJS installation is correct MEMORY: total used free shared buff/cache available Mem: 1.8G 1.2G 97M 38M 507M 498M Swap: 99M 99M 0.0K Total: 1.9G 1.3G 97M Active iob-Instances: 20 Upgrade policy: none ioBroker Core: js-controller 6.0.11 admin 7.1.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 6881 States: 5625 Size of iob-Database: 29M /opt/iobroker/iobroker-data/objects.jsonl 4.5M /opt/iobroker/iobroker-data/states.jsonl Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time! =================== END OF SUMMARY ====================Was ja immer noch geblieben ist, ist die bullseye/bookworm Meldung.....Was mach ich damit?
@uliauer44 sagte in Passwort Iobroker über Mac-Terminal anders?:
Was mach ich damit?
@meister-mopper sagte in Passwort Iobroker über Mac-Terminal anders?:
Mach den ganzen Bums neu
Das kann man nicht updaten.
Bookworm ist intern deutlich verändert worden
Da geht nur eine Neuinstallation mit anschließendem Einspielen des Backups
Support us
601
Online32.4k
Users81.4k
Topics1.3m
Posts