Performance Probleme durch Shelly Adapter?
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
jetzt sieht es gerade so aus:
immer noch viel zu hoch
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Load average: 3.64 4.11 4.59 3/1369 12369
hast du nicht
@frederik-buss sagte in Performance Probleme durch Shelly Adapter?:
grundlegender anfangen und alle Container deaktivieren
da laufen immer noch iob Prozesse
-
@schtallone said in Performance Probleme durch Shelly Adapter?:
@dp20eic said in Performance Probleme durch Shelly Adapter?:
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
top - 11:38:51 up 22:30, 0 users, load average: 3,95, 4,01, 4,15
Moin,
kannst Du mal Docker stoppen und schauen, ob der
load avarageauf ein normales maß fällt?
Kannst Du Dich auf die QNAP auch perssheinloggen, dann kannst Du da auch TOP nutzen.VG
BerndMittel SSH (Putty) und top
Vor dem Stop der Container-Station:
Mem: 4056084K used, 3923148K free, 399060K shrd, 462308K buff, 898664K cached CPU: 0.0% usr 50.0% sys 0.0% nic 50.0% idle 0.0% io 0.0% irq 0.0% sirq Load average: 4.20 4.25 4.16 6/1289 29424 PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND 1 0 admin S 7756 0.1 0 0.0 init 2 0 admin SW 0 0.0 0 0.0 [kthreadd] 3 2 admin IW< 0 0.0 0 0.0 [rcu_gp] 4 2 admin IW< 0 0.0 0 0.0 [rcu_par_gp] 8 2 admin IWN 0 0.0 0 0.0 [mm_percpu_wq] 9 2 admin SW 0 0.0 0 0.0 [ksoftirqd/0] 10 2 admin IW 0 0.0 0 0.0 [rcu_sched] 11 2 admin SW 0 0.0 0 0.0 [migration/0] 13 2 admin SWN 0 0.0 0 0.0 [cpuhp/0] 14 2 admin SWN 0 0.0 1 0.0 [cpuhp/1] 15 2 admin SW 0 0.0 1 0.0 [migration/1] 16 2 admin SW 0 0.0 1 0.0 [ksoftirqd/1] 19 2 admin SW 0 0.0 0 0.0 [kdevtmpfs] 20 2 admin IW< 0 0.0 1 0.0 [netns] 25 2 admin SW 0 0.0 0 0.0 [kauditd] 586 2 admin SW 0 0.0 1 0.0 [khungtaskd] 587 2 admin SW 0 0.0 0 0.0 [oom_reaper] 588 2 admin IW< 0 0.0 1 0.0 [writeback] 590 2 admin SW 0 0.0 0 0.0 [kcompactd0] 591 2 admin SWN 0 0.0 0 0.0 [ksmd] 605 2 admin IW< 0 0.0 0 0.0 [cryptd] 632 2 admin IW< 0 0.0 1 0.0 [kintegrityd] 633 2 admin IW< 0 0.0 0 0.0 [kblockd] 634 2 admin IW< 0 0.0 1 0.0 [blkcg_punt_bio] 760 1 admin S 165m 2.1 0 0.0 python /usr/local/network/nmd/nmd.pyc 775 1 admin S 23040 0.2 1 0.0 {qmmsd} python /usr/local/network/nmd/nmd.pyc 853 2 admin IW< 0 0.0 0 0.0 [tifm] 860 2 admin IW< 0 0.0 1 0.0 [ata_sff] 880 2 admin IW< 0 0.0 0 0.0 [md] 899 2 admin SW 0 0.0 0 0.0 [watchdogd] 955 1 admin S 147m 1.8 1 0.0 ./Plex Media Server 998 2 admin IW< 0 0.0 0 0.0 [rpciod] 999 2 admin IW< 0 0.0 0 0.0 [kworker/u9:0-i9] 1000 2 admin IW< 0 0.0 0 0.0 [xprtiod] 1037 2 admin SW 0 0.0 1 0.0 [kswapd0] 1038 2 admin SW 0 0.0 0 0.0 [ecryptfs-kthrea] 1041 2 admin IW< 0 0.0 1 0.0 [nfsiod] 1042 2 admin IW< 0 0.0 0 0.0 [cifsiod] 1043 2 admin IW< 0 0.0 0 0.0 [smb3decryptd] 1044 2 admin IW< 0 0.0 0 0.0 [cifsfileinfoput] 1045 2 admin IW< 0 0.0 0 0.0 [cifsoplockd] 1050 2 admin IW< 0 0.0 0 0.0 [kthrotld] 1114 2 admin SW 0 0.0 1 0.0 [card0-crtc0] 1115 2 admin SW 0 0.0 0 0.0 [card0-crtc1] 1116 2 admin SW 0 0.0 0 0.0 [card0-crtc2] 1127 955 admin S N 64540 0.8 0 0.0 {Plex Script Hos} Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle 1725 2 admin IW< 0 0.0 0 0.0 [kmpath_rdacd] 1732 2 admin IW< 0 0.0 0 0.0 [nvme-wq] 1734 2 admin IW< 0 0.0 0 0.0 [nvme-reset-wq] 1736 2 admin IW< 0 0.0 0 0.0 [nvme-delete-wq] 1747 2 admin SW 0 0.0 1 0.0 [scsi_eh_0] 1748 2 admin IW< 0 0.0 0 0.0 [scsi_tmf_0] 1752 2 admin SW 0 0.0 0 0.0 [scsi_eh_1] 1753 2 admin IW< 0 0.0 0 0.0 [scsi_tmf_1] 1796 2 admin SW 0 0.0 0 0.0 [rc0] 1801 2 admin IW< 0 0.0 1 0.0 [raid5wq] 1803 2 admin IW< 0 0.0 0 0.0 [dm-block-clone] 1805 2 admin IW< 0 0.0 1 0.0 [dm_bufio_cache] 1806 2 admin IW< 0 0.0 0 0.0 [kmpathd] 1807 2 admin IW< 0 0.0 0 0.0 [kmpath_handlerd] 1813 2 admin IW< 0 0.0 1 0.0 [sdhci] 1814 2 admin SW 0 0.0 0 0.0 [irq/39-mmc0] 1871 2 admin IW< 0 0.0 1 0.0 [zswap-shrink] 1873 2 admin IW< 0 0.0 1 0.0 [mmc_complete] 1997 2 admin IW< 0 0.0 1 0.0 [uas] 2200 1 admin S 698m 8.9 0 0.0 container-station/supervisord -c /share/CACHEDEV1_DATA/.qpkg/container-station/etc/supervisord.conf -d 2274 2200 admin S 38792 0.4 0 0.0 container-station/redis-server *:0 2289 2 admin IW< 0 0.0 0 0.0 [kcopyd] 2290 2 admin IW< 0 0.0 1 0.0 [kcopyd_tracked] 2302 2 admin IW< 0 0.0 0 0.0 [drbd-reissue] 2466 1 admin S 15124 0.1 1 0.0 udevd --daemon 2843 2200 admin S 1385m 17.7 0 0.0 container-station/dockerd -H unix:///var/run/system-docker.sock --bridge=docker0 --storage-driver=overlay2 --dns 10.0.5.1 --data-root=/var/lib/system-docker --exec-root=/var/run/system-docker --pidfile=/var/run/system-docker.pid -D --userland-proxy=false --config-file /share/CACHEDEV1_DATA/.qpkg/container-station/etc/system-docker.json 2873 2843 admin S 1302m 16.6 1 0.0 container-station/containerd --config /var/run/system-docker/containerd/containerd.toml --log-level debug 2887 2200 admin S 4362m 55.8 1 0.0 /share/CACHEDEV1_DATA/.qpkg/container-station/etc/../bin/container-station 3052 2200 admin S 1911m 24.4 0 0.0 container-station/dockerd -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --bridge=lxcbr0 --tlsverify --tlscacert=/etc/docker/tls/ca.pem --tlscert=/etc/docker/tls/server.pem --tlskey=/etc/docker/tls/server-key.pem --storage-driver=overlay2 --dns 10.0.3.1 --data-root=/var/lib/docker --exec-root=/var/run/docker --pidfile=/var/run/docker.pid -D --userland-proxy=false --config- 3100 2200 admin S 1499m 19.1 1 0.0 container-station/lxd 3101 3052 admin S 1375m 17.5 1 0.0 container-station/containerd --config /var/run/docker/containerd/containerd.toml --log-level debug 3215 2 admin SW 0 0.0 0 0.0 [md9_raid1] 3228 2 admin SW 0 0.0 0 0.0 [jbd2/md9-8] 3229 2 admin IW< 0 0.0 1 0.0 [ext4-rsv-conver] 3237 955 admin S 41212 0.5 1 0.0 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600 3239 2 admin SW 0 0.0 1 0.0 [md13_raid1]NAch Stop der Container-Station
Mem: 4409348K used, 3569884K free, 399108K shrd, 1484984K buff, 545384K cached CPU: 20.0% usr 19.2% sys 1.2% nic 59.3% idle 0.0% io 0.0% irq 0.0% sirq Load average: 2.14 3.08 3.78 9/1123 11343 PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND 5479 2 admin RW 0 0.0 1 5.0 [notify thread] 3441 1 admin S 1326m 16.9 0 2.6 /sbin/hal_daemon -f 32076 2 admin IW 0 0.0 0 1.4 [kworker/0:0-kac] 8632 2 admin IW 0 0.0 1 1.1 [kworker/1:5-fno] 31533 2 admin IW 0 0.0 1 0.8 [kworker/1:0-eve] 15037 2 admin DW 0 0.0 0 0.6 [kworker/0:75+pm] 15069 2 admin IW 0 0.0 0 0.4 [kworker/0:95-ka] 13304 1 admin S 424m 5.4 1 0.2 /share/CACHEDEV1_DATA/.qpkg/CloudLink/tutk/bin/tutk_agent -d 4 10394 1 admin S 222m 2.8 0 0.2 /mnt/ext/opt/Python/bin/python2 /sbin/wsd.py 7597 1 admin S 41708 0.5 0 0.2 /mnt/ext/opt/netmgr/util/redis/redis-server *:0 6268 18618 admin S < 2189m 28.0 0 0.1 /usr/local/apache/bin/apache_proxy -k start -f /etc/apache-sys-proxy.conf 14488 1 admin S 1397m 17.8 1 0.1 {cc3-fastcgi} python /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3/python/bin/cc3-fastcgi -w /share/CACHEDEV1_DATA/.qpkg/HybridBackup/CloudConnector3 start 12222 11744 admin S 882m 11.2 1 0.1 /usr/local/mariadb/bin/mysqld --defaults-file=/usr/local/mariadb/my-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.system/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.system/tmp --log-error=/share/CACHEDEV1_DATA/.system/data/QNAP-TS251D.err --pid-file 7559 1 admin S 559m 7.1 0 0.1 /mnt/ext/opt/Python/bin/python ./manage.pyc runfcgi method=threaded socket=/tmp/netmgr.sock pidfile=/tmp/netmgr.pid errlog=/tmp/nvs-django-e.log outlog=/tmp/nvs-django-o.log 16003 1 admin S 382m 4.9 0 0.1 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app qufirewall-monitor start 4487 1 admin S 239m 3.0 1 0.1 /sbin/lvmetad 8545 8463 admin S 222m 2.8 0 0.1 {gwd} python /usr/local/network/nmd/nmd.pyc 8493 8463 admin S 219m 2.8 0 0.1 {ncaas} python /usr/local/network/nmd/nmd.pyc 10072 22367 admin S 176m 2.2 0 0.1 my_qmonitor -pid:22367 -client:mymediadbserver -reg:/share/CACHEDEV1_DATA/Bilder/Bilder Unsortiert/ -filter:0x400 -root_event -dbdir:/share/CACHEDEV1_DATA/.system/qmonitor/dbdir 32102 1 admin S 114m 1.4 0 0.1 /usr/local/bin/qsyncsrv_monitor -pid:32091 -reg:/share/CACHEDEV1_DATA/.team_folder -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b 21706 20140 admin S 88172 1.1 0 0.1 sshd: admin@pts/1 22664 1 admin S 84952 1.0 0 0.1 /sbin/rfsd -i -f /etc/rfsd.conf 11426 1 admin S 74752 0.9 1 0.1 /sbin/vdd_control -d 3237 955 admin S 41212 0.5 0 0.1 /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Plex Tuner Service /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Private /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Tuner/Shared 1.31.0.6654-02189b09f 32600 29203 1 admin S 20692 0.2 1 0.1 {qdesk_soldier} /bin/sh /sbin/qdesk_soldier 10947 24645 admin R 16180 0.2 1 0.1 top 21295 21014 admin S 2463m 31.5 1 0.0 /share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/bin/mariadbd --defaults-file=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/my.cnf --basedir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10 --datadir=/share/CACHEDEV1_DATA/.system/data.m10 --plugin-dir=/share/CACHEDEV1_DATA/.qpkg/MultimediaConsole/mariadb10/lib/plugin --user=admin --tmpdir=/share/CACHEDEV1_DATA/.sys 17255 16150 httpdusr S 2180m 27.8 1 0.0 /usr/local/apache/bin/apache -k start -c PidFile /var/lock/apache.pid -f /etc/config/apache/apache.conf 6809 20178 admin S 1360m 17.4 0 0.0 /usr/local/apache/bin/apache_proxys -k start -f /etc/apache-sys-proxy-ssl.conf 14539 14537 admin S 1212m 15.5 1 0.0 /usr/local/sbin/ncd 13710 1 admin S 1196m 15.3 1 0.0 /usr/local/sbin/qulogdb --defaults-file=/mnt/ext/opt/QuLog/etc/qulog-mariadb.conf 26954 26952 admin S 1051m 13.4 0 0.0 /usr/bin/qDmcd 31913 31423 admin S 865m 11.0 1 0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qbox-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qbox/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qbox/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qbox/mysql/data/QNAP-TS251D.err --pid-file 26094 25688 admin S 857m 10.9 1 0.0 /usr/local/mariadb/bin/mysqld --defaults-file=/etc/qcoolie-mariadb.cnf --basedir=/usr/local/mariadb --datadir=/share/CACHEDEV1_DATA/.qcoolie/mysql/data --plugin-dir=/usr/local/mariadb/lib/plugin --user=admin --default-storage-engine=MyISAM --wait-timeout=2628000 --tmpdir=/share/CACHEDEV1_DATA/.qcoolie/mysql/tmp --log-error=/share/CACHEDEV1_DATA/.qcoolie/mysql/data/QNAP-TS251D.er 29133 1 admin S N 830m 10.6 0 0.0 /usr/local/medialibrary/bin/myidbserver -d 22367 1 admin S 766m 9.8 0 0.0 /usr/local/medialibrary/bin/mymediadbserver -t -d -i -1 10610 1 admin S 704m 9.0 0 0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080 10603 1 admin S 704m 9.0 1 0.0 /share/CACHEDEV1_DATA/.qpkg/CloudLink/bin/p2pagent run-answer --socket-addr /share/CACHEDEV1_DATA/.qpkg/CloudLink/tmp/p2p.sock --log-file /tmp/.p2pagent.log -R 8080 22489 1 admin S 549m 7.0 1 0.0 /sbin/upnpd br0 br0 14499 1 admin S 507m 6.5 0 0.0 /usr/local/sbin/ncdb --defaults-file=/mnt/ext/opt/NotificationCenter/etc/nc-mariadb.conf 9830 1 admin S 440m 5.6 0 0.0 /mnt/ext/opt/Python/bin/python /mnt/ext/opt/netmgr/api service ip_monitor start 19033 19030 admin S 431m 5.5 1 0.0 /usr/local/medialibrary/bin/mytranscodesvr -debug -db /share/CACHEDEV1_DATA/ 17787 1 admin S 401m 5.1 1 0.0 /mnt/ext/opt/Python/bin/python /share/CACHEDEV1_DATA/.qpkg/qufirewall/app api start 28520 17710 Peter Pa S 383m 4.9 0 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 7232 1 admin S 360m 4.6 1 0.0 {php-fpm-proxy} php-fpm: master process (/etc/php-fpm-sys-proxy.conf) 7236 7232 admin S 360m 4.6 0 0.0 {php-fpm-proxy} php-fpm: pool www 7237 7232 admin S 360m 4.6 1 0.0 {php-fpm-proxy} php-fpm: pool www 16091 1 admin S 360m 4.6 0 0.0 {php-fpm-qweb} php-fpm: master process (/etc/config/apache/php-fpm-qweb.conf) 16092 16091 httpdusr S 360m 4.6 1 0.0 {php-fpm-qweb} php-fpm: pool www 16093 16091 httpdusr S 360m 4.6 1 0.0 {php-fpm-qweb} php-fpm: pool www 7158 1 admin S 359m 4.6 1 0.0 {qumagie-php-fpm} php-fpm: master process (/share/CACHEDEV1_DATA/.qpkg/qumagie/v2.1.2/php-fpm-qumagie.conf) 17720 17710 admin S 355m 4.5 1 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17710 1 admin S 350m 4.4 0 0.0 /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17718 17710 admin S 349m 4.4 1 0.0 {cleanupd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 17717 17710 admin S 349m 4.4 1 0.0 {smbd-notifyd} /usr/local/samba/sbin/smbd -l /var/log -D -s /etc/config/smb.conf 13801 13794 admin S 341m 4.3 0 0.0 /usr/local/sbin/qulogd 26414 1 admin S 336m 4.3 0 0.0 /usr/local/sbin/pp_qcoolied -f /etc/config/pp_qcoolie/qcoolie.conf 28267 1 admin S 336m 4.3 0 0.0 tunnelagent 26936 26934 admin S 325m 4.1 1 0.0 /usr/local/medialibrary/bin/myupnpmediasvr 17648 17621 admin S < 316m 4.0 1 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 5756 1 admin S 312m 4.0 0 0.0 /sbin/cs_qdaemon 17621 1 admin S < 308m 3.9 1 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 17719 17621 admin S < 308m 3.9 0 0.0 /usr/local/samba/sbin/winbindd -s /etc/config/smb.conf 32137 1 admin S 306m 3.9 1 0.0 /usr/local/bin/qsyncsrv_monitor -pid:32132 -reg:/share/homes -expath:/@Recently-Snapshot -client:qbox -filter:0x6763 -b 19516 1 admin S 302m 3.8 1 0.0 /sbin/multipathd 8494 8463 admin S 293m 3.7 1 0.0 {qserviced} python /usr/local/network/nmd/nmd.pyc 32046 1 admin S 280m 3.5 1 0.0 /sbin/qsyncsrv_dbm -b 17751 1 admin S 252m 3.2 1 0.0 /usr/local/samba/sbin/nmbd -l /var/log -D -s /etc/config/smb.conf 22937 1 admin S 237m 3.0 1 0.0 /usr/sbin/rsyslogd -f /etc/rsyslog_only_klog.conf -c4 -M /usr/local/lib/rsyslog/ 23781 1 admin S 227m 2.9 0 0.0 /sbin/qShield 22703 1 admin S 226m 2.9 0 0.0 /usr/local/bin/rfsd_qmonitor -f:/tmp/rfsd_qmonitor.conf 8547 8463 admin S 219m 2.8 0 0.0 {ressd} python /usr/local/network/nmd/nmd.pyc 23772 1 admin S 219m 2.8 1 0.0 qLogEngined: Write log is enabled... 19499 1 admin S 211m 2.7 0 0.0 /usr/local/medialibrary/bin/myconvertserver -d 6264 6082 admin S < 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6578 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6084 6082 admin S < 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6759 6082 admin S < 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6803 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 6962 6082 admin S < 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 7060 6576 admin S 207m 2.6 1 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgi 7220 6576 admin S 207m 2.6 0 0.0 /home/httpd/cgi-bin/qsync/qsyncsrv.fcgiinzwischen habe ich den iob ja auch wieder laufen und teste einzelene Adapter bzgl. Performance-Verhalten. Alle Container aus: siehe Post oben
Ich kann die Übung aber nochmals machen...
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Alle Container aus: siehe Post oben
link bitte!
das wird hier schnell unübersichtlich
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
siehe Post oben
Du erwartest aber nicht von Helfenden dass man "siehe Post oben" alle Beiträge durchsucht ? Du machst es Dir echt einfach !
-
ok, hab's (hoffentlich)
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Load average: 2.14 3.08 3.78 9/1123 11343
noch immer zu hoch.
wie lange war die Container station aus? -
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Mittel SSH (Putty) und top
Ich glaube mittlerweile, dass es kein CPU Problem, sondern ein Problem mit den/der Festplatte(n) ist. Das klang ja auch in einigen Kommentaren schon an.
Ist auf QNAP "iotop" installiert, welches du über das Terminal starten kannst?
-
@marc-berg sagte in Performance Probleme durch Shelly Adapter?:
sondern ein Problem mit den/der Festplatte(n) ist
würde zum hohen I/O passen
-
@homoran sagte in Performance Probleme durch Shelly Adapter?:
würde zum hohen I/O passen
genau, das ist der Gedanke dahinter. Bzw. der hohe Load.
-
-
@marc-berg said in Performance Probleme durch Shelly Adapter?:
iotop
nein noch nicht. Installiere es gerade. Mit welchen parameter soll ich die messung machen in SSH? Oder auf der Oberfläche?
-
@djmarc75
ne, ich habe nur eine Erwartung. Einen freundlichen unterton... -
@schtallone said in Performance Probleme durch Shelly Adapter?:
@marc-berg said in Performance Probleme durch Shelly Adapter?:
iotop
nein noch nicht. Installiere es gerade. Mit welchen parameter soll ich die messung machen in SSH? Oder auf der Oberfläche?
Total DISK READ: 0.00 B/s | Total DISK WRITE: 20.48 K/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 17547 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 8.98 % /usr/sbin/rsyslogd -f /etc/rsyslog_only_klog.conf -c4 -M /usr/local/lib/rsyslog/ 3228 be/3 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 1.70 % [jbd2/md9-] 3 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rcu_g] 4 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rcu_par_g] 8 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [mm_percpu_w] 9 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ksoftirqd/] 10 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rcu_sche] 11 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [migration/] 13 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [cpuhp/] 14 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [cpuhp/] 15 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [migration/] 16 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ksoftirqd/] 19 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kdevtmpf] 20 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [netn] 25 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kaudit] 586 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [khungtask] 587 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [oom_reape] 588 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [writebac] 590 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kcompactd] 591 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ksm] 605 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [crypt] 632 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kintegrity] 633 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kblock] 634 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [blkcg_punt_bi] 760 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % python /usr/local/network/nmd/nmd.pyc 775 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % python /usr/local/network/nmd/nmd.pyc 780 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % python /usr/local/network/nmd/nmd.pyc 853 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [tif] 860 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ata_sf] 880 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [m] 899 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog] 955 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1021 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1062 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1064 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1076 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1077 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1087 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1113 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1118 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1126 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3222 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3226 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3227 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3230 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3236 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3243 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3304 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 11285 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 5500 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 5502 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 996 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % sshd: admin@pts/1 998 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rpcio] 1000 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [xprtio] 1037 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kswapd] 1038 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ecryptfs-kthre] 1041 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [nfsio] 1042 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [cifsio] 1043 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [smb3decrypt] 1044 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [cifsfileinfopu] 1045 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [cifsoplock] 1050 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kthrotl] 1114 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [card0-crtc] 1115 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [card0-crtc] 1116 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [card0-crtc] 1127 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundle 1702 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % Plex Plug-in [com.plexapp.system] /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.py --server-version 1.31.0.6654-02189b09f /share/CACHEDEV1_DATA/.qpkg/PlexMediaServer/Resources/Plug-ins-02189b09f/System.bundleDie App öffnet selber ein Terminal und zeigt dan dies...
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Die App öffnet selber ein Terminal und zeigt dan dies...
Drücke mal die "a" Taste, dann müssten die akkumulierten Werte angezeigt werden. Sieht aber auf den ersten Blick unspektakulär aus.
-
@marc-berg sagte in Performance Probleme durch Shelly Adapter?:
Sieht aber auf den ersten Blick unspektakulär aus.
ausser das syslog rotiert (sonst noch mehr)
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
Die App öffnet selber ein Terminal und zeigt dan dies...
Das habe ich nicht so ganz verstanden. Hast du iotop nicht über SSH gestartet?
-
@marc-berg ne, kann ich aber machen
moment -
[~] # iotop Total DISK READ: 0.00 B/s | Total DISK WRITE: 16.38 K/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 1 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % init 2 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kthread] 3 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rcu_g] 4 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rcu_par_g] 8 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [mm_percpu_w] 9 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ksoftirqd/] 10 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [rcu_sche] 11 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [migration/] 13 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [cpuhp/] 14 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [cpuhp/] 15 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [migration/] 16 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ksoftirqd/] 19 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kdevtmpf] 20 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [netn] 25 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kaudit] 441 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % sshd: admin@pts/3 586 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [khungtask] 587 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [oom_reape] 588 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [writebac] 590 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kcompactd] 591 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ksm] 605 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [crypt] 632 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kintegrity] 633 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [kblock] 634 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [blkcg_punt_bi] 760 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % python /usr/local/network/nmd/nmd.pyc 775 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % python /usr/local/network/nmd/nmd.pyc 780 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % python /usr/local/network/nmd/nmd.pyc 817 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % -sh 853 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [tif] 860 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [ata_sf] 880 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [m] 899 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % [watchdog] 955 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1021 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1062 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1064 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1076 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1077 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1087 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1113 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1118 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 1126 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3222 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3226 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3227 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3230 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server 3236 -/4 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server -
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
955 -/0 UNKNOWN 0.00 B/s 0.00 B/s 0.00 % 0.00 % ./Plex Media Server
Moin,
ich dachte da läuft keine Videostation, Plex ist aber eine!
VG
Bernd -
@dp20eic sorry, ich dachte Kamera-Survialance Apps. Soll ich Plex einmal deaktivieren?
-
@schtallone sagte in Performance Probleme durch Shelly Adapter?:
[~] # iotop
Total DISK READ: 0.00 B/s | Total DISK WRITE: 16.38 K/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> >COMMANDHatte die Hoffnung, dass hier was zu sehen ist. Aber leider nicht. Nach 200 Posts ohne Lösung würde ich wahrscheinlich an deiner Stelle
den Schrott in die Tonne tretenalles komplett neu aufsetzen.
