UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[arteck]

danach adapter starten und WARTEN... wichtig .. nicht ungeduldig werden... WARTEN
auch wenn nicht sofort alle Geräte da sind.. WARTEN..

[brokeling]

Vielen lieben Dank für die Hilfe!
Jetzt bin ich aber unschlüssig welche FW passt, denn die
CC26X2R1 steht so ja nicht dabei...
Also
wahrscheinlich die letztere = CC2652R_..., oder?

[Thomas Braun]

@brokeling

Ist der hier nicht dabei?

https://www.zigbee2mqtt.io/guide/adapters/#recommended

[brokeling]

@thomas-braun
Doch, der ist dabei (Development Board) und es wird auf dieselbe Coordinator Firmware verwiesen (CC2652R_...), passt also!

[brokeling]

Update erfolgreich!
Aber Adapter macht doch noch Schwierigkeiten.
Zunächst war er auf grün. Die Geräte ließen sich aber nicht ansteuern.
Dann aber wieder Probleme. Bei neustart:

89
8
Log-Größe: 1.7 MB

1
Zeit
warn
Nachricht

zigbee.0
2023-08-17 13:03:53.692	error	Error herdsman start

zigbee.0
2023-08-17 13:03:53.691	error	Failed to start Zigbee

zigbee.0
2023-08-17 13:03:53.690	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00'"

zigbee.0
2023-08-17 13:03:43.663	error	Error herdsman start

zigbee.0
2023-08-17 13:03:43.662	error	Failed to start Zigbee

zigbee.0
2023-08-17 13:03:43.660	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00'"

[A Former User]

@brokeling sagte in Noch ein Zigbee Problem....:

Ich habe jetzt auch ein Zigbee Problem, das mit einem Update zusammenhängen könnte.

Moin,

vielleicht solltest Du nochmals genauer beschreiben, was Du gemacht hast, also welche Updates und wie!

Dann einmal auch die Langfassung von

iob diag

Dann den Adapter mal im Debug Mode starten.

Das senetry für den Adapter ausschalten.

VG
Bernd

[brokeling]

Das Update über Unifash von TI
Firmware: CC2652R_coordinator_20230507.hex
Raspi zunächst stromlos, dann Neustart mit angedockten ISB TI Controller.

pi@raspi:~ $ iob diag
iobroker [command]

Commands:
  iobroker setup                                               Setup ioBroker
  iobroker start [all|<adapter>.<instance>|<adapter>]          Starts the js-controller or a specified adapter instance or all instances of an adapter
  iobroker stop [<adapter>.<instance>|<adapter>]               stops the js-controller or a specified adapter instance or all instances of an adapter
  iobroker restart [<adapter>.<instance>|<adapter>]            Restarts js-controller or a specified adapter instance or all instances of an adapter  [aliases: r]
  iobroker debug <adapter>[.<instance>]                        Starts a Node.js debugging session for the adapter instance
  iobroker info                                                Shows the host info
  iobroker logs [<adapter>]                                    Monitor log
  iobroker add <adapter> [desiredNumber]                       Add instance of adapter  [aliases: a]
  iobroker install <adapter>                                   Installs a specified adapter  [aliases: i]
  iobroker rebuild [<module>]                                  Rebuild all native modules or path
  iobroker url <url> [<name>]                                  Install adapter from specified url, e.g. GitHub
  iobroker del <adapter>                                       Remove adapter and all instances from this host  [aliases: delete]
  iobroker del <adapter>.<instance>                            Remove adapter instance  [aliases: delete]
  iobroker update [<repositoryUrl>]                            Update repository and list adapters
  iobroker upgrade                                             Upgrade management
  iobroker upload [all|<adapter>]                              Upload management  [aliases: u]
  iobroker object                                              Object management  [aliases: o]
  iobroker state                                               State management  [aliases: s]
  iobroker message <adapter>[.instance] <command> [<message>]  Send message to adapter instance/s
  iobroker list <type> [<filter>]                              List all entries, like objects
  iobroker chmod <mode> <file>                                 Change file rights
  iobroker chown <user> <group> <file>                         Change file ownership
  iobroker touch <file>                                        Touch file
  iobroker rm <file>                                           Remove file
  iobroker file                                                File management
  iobroker user                                                User commands
  iobroker group                                               group management
  iobroker host <hostname>                                     Set host to given hostname
  iobroker set <adapter>.<instance>                            Change settings of adapter config
  iobroker license <license.file or license.text>              Update license by given file
  iobroker cert                                                Certificate management
  iobroker clean <yes>                                         Clears all objects and states
  iobroker backup                                              Create backup
  iobroker restore <backup name or path>                       Restore a specified backup
  iobroker validate <backup name or path>                      Validate a specified backup
  iobroker status [all|<adapter>.<instance>]                   Status of ioBroker or adapter instance  [aliases: isrun]
  iobroker repo [<name>]                                       Show repo information
  iobroker uuid                                                Show uuid of the installation  [aliases: id]
  iobroker unsetup                                             Reset license, installation secret and language
  iobroker fix                                                 Execute the installation fixer script, this updates your ioBroker installation
  iobroker multihost                                           Multihost management
  iobroker compact                                             compact group management
  iobroker plugin                                              Plugin management
  iobroker vendor <passphrase> [<vendor.json>]                 Update the vendor information using given passphrase
  iobroker version [<adapter>]                                 Show version of js-controller or specified adapter  [aliases: v]

Options:
  --help  Show help  [boolean]
pi@raspi:~ $

[DJMarc75]

@brokeling

iob stop
iob fix
sudo reboot
iob diag

[brokeling]

@djmarc75
Summary:

======================= SUMMARY =======================
                     v.2023-04-16


Operatingsystem:        Raspbian GNU/Linux 10 (buster)
Kernel:                 5.10.103-v7l+
Installation:           Native
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     8
Pending iob updates:    5

Nodejs-Installation:    /usr/bin/nodejs         v18.17.1
                        /usr/bin/node           v18.17.1
                        /usr/bin/npm            9.6.7
                        /usr/bin/npx            9.6.7

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:           3.8G        1.6G        1.2G        8.0M        921M        2.0G
Swap:           99M          0B         99M
Total:         3.9G        1.6G        1.3G

Active iob-Instances:   33
Active repo(s): beta

ioBroker Core:          js-controller           5.0.11
                        admin                   6.7.2

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: redis

Status admin and web instance:
+ system.adapter.admin.1                  : admin                 : raspi                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspi                                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                17066
States:                 12808

Size of iob-Database:

22M     /opt/iobroker/iobroker-data/objects.jsonl
8.4M    /opt/iobroker/iobroker-data/objects.json.migrated
8.4M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
12K     /opt/iobroker/iobroker-data/objects.json.old
41M     /opt/iobroker/iobroker-data/states.json.old
41M     /opt/iobroker/iobroker-data/states.json.bak
0       /opt/iobroker/iobroker-data/states.json



=================== END OF SUMMARY ====================

lange Version:

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.1
Architecture    : armv7l
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 14:19:25 up 5 min,  1 user,  load average: 4.56, 4.04, 1.85
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=64.2'C
volt=0.8375V

*** Time and Time Zones ***
               Local time: Thu 2023-08-17 14:19:25 CEST
           Universal time: Thu 2023-08-17 12:19:25 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           3.8G        1.6G        1.3G        8.0M        918M        2.1G
Swap:           99M          0B         99M
Total:         3.9G        1.6G        1.4G

         3786 M total memory
         1568 M used memory
          363 M active memory
         1974 M inactive memory
         1298 M free memory
          109 M buffer memory
          809 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      117G   17G   94G  16% /
devtmpfs       devtmpfs  1.7G     0  1.7G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     1.9G  8.6M  1.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/sdb1      ext4      113G   71G   37G  66% /backup
/dev/sda1      vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     379M     0  379M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Aug 17 14:13:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:40:0F:7D vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Aug 17 14:13:42 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Aug 17 14:13:42 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Thu Aug 17 14:13:43 2023] EXT4-fs (sda2): re-mounted. Opts: (null)
[Thu Aug 17 14:13:46 2023] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

Show mounted filesystems (real ones only):
TARGET        SOURCE    FSTYPE OPTIONS
/             /dev/sda2 ext4   rw,noatime,stripe=8191
|-/sys/fs/bpf none      bpf    rw,nosuid,nodev,noexec,relatime,mode=700
|-/backup     /dev/sdb1 ext4   rw,noatime
`-/boot       /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
5.8G    /var/
3.4G    /var/cache
3.3G    /var/cache/apt/archives
3.3G    /var/cache/apt
2.4G    /var/lib

Archived and active journals take up 8.0M in the file system.

/opt/iobroker/backups:
2.9G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
541M    /opt/iobroker/iobroker-data/backup-objects
383M    /opt/iobroker/iobroker-data/files
78M     /opt/iobroker/iobroker-data/files/icons-open-icon-library-png
52M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
41M     /opt/iobroker/iobroker-data/states.json.old
41M     /opt/iobroker/iobroker-data/states.json.bak
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
22M     /opt/iobroker/iobroker-data/objects.jsonl
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     16.20.2-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages
     14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
     12.22.12-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_12.x buster/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: redis

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  5.0.11
admin:          6.7.2
javascript:     7.1.4

Adapters from github:   3

Adapter State
+ system.adapter.admin.1                  : admin                 : raspi                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : raspi                                    -  enabled
+ system.adapter.backitup.0               : backitup              : raspi                                    -  enabled
+ system.adapter.chromecast.0             : chromecast            : raspi                                    -  enabled
+ system.adapter.cloud.0                  : cloud                 : raspi                                    -  enabled
  system.adapter.deconz.0                 : deconz                : raspi                                    - disabled, port: 80
  system.adapter.devices.0                : devices               : raspi                                    -  enabled
+ system.adapter.discovery.0              : discovery             : raspi                                    -  enabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : raspi                                    - disabled
  system.adapter.feiertage.0              : feiertage             : raspi                                    -  enabled
  system.adapter.flot.0                   : flot                  : raspi                                    -  enabled
  system.adapter.fritzdect.0              : fritzdect             : raspi                                    - disabled
  system.adapter.hue-extended.0           : hue-extended          : raspi                                    - disabled
  system.adapter.hue.0                    : hue                   : raspi                                    - disabled, port: 443
  system.adapter.ical.0                   : ical                  : raspi                                    -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : raspi                                    -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspi                                    -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspi                                    -  enabled
  system.adapter.iqontrol.0               : iqontrol              : raspi                                    - disabled
+ system.adapter.javascript.0             : javascript            : raspi                                    -  enabled
  system.adapter.luftdaten.0              : luftdaten             : raspi                                    -  enabled
  system.adapter.luftdaten.1              : luftdaten             : raspi                                    -  enabled
  system.adapter.mqtt.0                   : mqtt                  : raspi                                    - disabled, port: 1884, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : raspi                                    -  enabled
+ system.adapter.netatmo-crawler.0        : netatmo-crawler       : raspi                                    -  enabled
+ system.adapter.nuki.0                   : nuki                  : raspi                                    -  enabled
+ system.adapter.onvif.0                  : onvif                 : raspi                                    -  enabled, port: 80, 7575, 8000, 8080, 8081, 8899
+ system.adapter.ping.0                   : ping                  : raspi                                    -  enabled
+ system.adapter.pushover.0               : pushover              : raspi                                    -  enabled
+ system.adapter.reolink.0                : reolink               : raspi                                    -  enabled
+ system.adapter.reolink.1                : reolink               : raspi                                    -  enabled
+ system.adapter.reolink.2                : reolink               : raspi                                    -  enabled
+ system.adapter.reolink.3                : reolink               : raspi                                    -  enabled
+ system.adapter.reolink.4                : reolink               : raspi                                    -  enabled
  system.adapter.samsung_tizen.0          : samsung_tizen         : raspi                                    -  enabled, port: 8002
+ system.adapter.sayit.0                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.1                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.2                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.3                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.4                  : sayit                 : raspi                                    -  enabled
+ system.adapter.sayit.5                  : sayit                 : raspi                                    -  enabled
+ system.adapter.shelly.0                 : shelly                : raspi                                    -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspi                                    -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.smartcontrol.0           : smartcontrol          : raspi                                    - disabled
+ system.adapter.sonoff.0                 : sonoff                : raspi                                    -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspi                                    -  enabled
+ system.adapter.spotify-premium.0        : spotify-premium       : raspi                                    -  enabled
+ system.adapter.sql.0                    : sql                   : raspi                                    -  enabled, port: 0
  system.adapter.statistics.0             : statistics            : raspi                                    -  enabled
+ system.adapter.telegram.0               : telegram              : raspi                                    -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : raspi                                    - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspi                                    -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspi                                    -  enabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : raspi                                    -  enabled
  system.adapter.vis-history.0            : vis-history           : raspi                                    -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspi                                    -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspi                                    -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspi                                    -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspi                                    -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspi                                    -  enabled
  system.adapter.vis-metro.0              : vis-metro             : raspi                                    -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : raspi                                    -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspi                                    -  enabled
  system.adapter.vis.0                    : vis                   : raspi                                    -  enabled
+ system.adapter.web.0                    : web                   : raspi                                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : raspi                                    -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspi                                    -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : raspi                                    -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.onvif.0                  : onvif                 : raspi                                    -  enabled, port: 80, 7575, 8000, 8080, 8081, 8899
  system.adapter.samsung_tizen.0          : samsung_tizen         : raspi                                    -  enabled, port: 8002
+ system.adapter.shelly.0                 : shelly                : raspi                                    -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspi                                    -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspi                                    -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.sql.0                    : sql                   : raspi                                    -  enabled, port: 0
+ system.adapter.telegram.0               : telegram              : raspi                                    -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspi                                    -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspi                                    -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.8.3    , installed 6.7.2  [Updatable]
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "asterisk"     : 1.0.6    , installed 1.0.6
Adapter    "backitup"     : 2.7.0    , installed 2.6.23 [Updatable]
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "cloud"        : 4.4.1    , installed 4.4.1
Adapter    "countdown"    : 2.1.0    , installed 2.0.1  [Updatable]
Adapter    "deconz"       : 1.3.21   , installed 1.3.21
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "digitalstrom" : 2.3.0    , installed 2.3.0
Adapter    "discovery"    : 3.2.0    , installed 3.2.0
Adapter    "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "hue"          : 3.9.6    , installed 3.9.3  [Updatable]
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "iqontrol"     : 2.3.0    , installed 2.2.0  [Updatable]
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.11   , installed 5.0.11
Adapter    "luftdaten"    : 3.0.0    , installed 3.0.0
Adapter    "moma"         : 1.2.9    , installed 1.2.9
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "mydlink"      : 1.3.2    , installed 1.3.2
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "nuki"         : 1.6.0    , installed 1.6.0
Adapter    "nuki-extended": 2.6.5    , installed 2.6.5
Adapter    "octoprint"    : 5.0.1    , installed 5.0.1
Adapter    "onvif"        : 1.0.5    , installed 1.0.5
Adapter    "owntracks"    : 1.0.5    , installed 1.0.5
Adapter    "paw"          : 0.3.2    , installed 0.3.2
Adapter    "ph803w"       : 1.1.1    , installed 1.1.1
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "pushover"     : 3.0.4    , installed 3.0.4
Adapter    "samsung"      : 0.5.11   , installed 0.5.11
Adapter    "sayit"        : 3.0.5    , installed 3.0.5
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartcontrol" : 1.3.2    , installed 1.3.2
Adapter    "socketio"     : 6.5.2    , installed 6.5.2
Adapter    "sonoff"       : 2.5.7    , installed 2.5.7
Adapter    "sourceanalytix": 0.4.14  , installed 0.4.14
Adapter    "spotify-premium": 1.2.2  , installed 1.2.2
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "statistics"   : 2.3.0    , installed 2.3.0
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "text2command" : 3.0.2    , installed 3.0.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.96.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.1.0    , installed 6.1.0
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "wiobrowser"   : 2.0.1    , installed 2.0.1
Adapter    "ws"           : 2.5.3    , installed 2.5.3
Adapter    "zigbee"       : 1.8.23   , installed 1.8.23

Objects and States
Please stand by - This may take a while
Objects:        17066
States:         12808

*** OS-Repositories and Updates ***
Hit:1 http://phoscon.de/apt/deconz buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 http://archive.raspberrypi.org/debian buster InRelease
Hit:4 https://deb.nodesource.com/node_12.x buster InRelease
Hit:5 https://deb.nodesource.com/node_14.x buster InRelease
Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease
Hit:7 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 8

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:8080          0.0.0.0:*               LISTEN      119        19462      568/motion
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      1000       18473      374/deCONZ
tcp        0      0 0.0.0.0:8083            0.0.0.0:*               LISTEN      119        18490      568/motion
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          20173      709/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          18483      388/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       22385      1418/io.sonoff.0
tcp        0      0 0.0.0.0:443             0.0.0.0:*               LISTEN      1000       17607      374/deCONZ
tcp        0      0 192.168.178.53:9092     0.0.0.0:*               LISTEN      1001       28921      2139/io.nuki.0
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       18204      736/iobroker.js-con
tcp        0      0 0.0.0.0:3306            0.0.0.0:*               LISTEN      110        20247      764/mysqld
tcp        0      0 0.0.0.0:6379            0.0.0.0:*               LISTEN      118        17803      717/redis-server 0.
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       18345      1042/io.admin.1
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       25805      1789/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          20175      709/sshd
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       31564      3271/io.simple-api.
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          18482      388/cupsd
tcp6       0      0 ::1:6379                :::*                    LISTEN      118        17804      717/redis-server 0.
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       24368      1753/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          16243      698/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          17398      491/cups-browsed
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       24971      1499/io.chromecast.
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        16027      382/avahi-daemon: r
udp        0      0 0.0.0.0:55070           0.0.0.0:*                           108        16029      382/avahi-daemon: r
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1000       17630      374/deCONZ
udp6       0      0 :::546                  :::*                                0          16265      698/dhcpcd
udp6       0      0 :::5353                 :::*                                108        16028      382/avahi-daemon: r
udp6       0      0 :::49038                :::*                                108        16030      382/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-08-17 14:20:07.253  - info: netatmo-crawler.0 (7697) Getting data for stationid:70:ee:50:29:08:fe
2023-08-17 14:20:08.850  - info: netatmo-crawler.0 (7697) Getting data for stationid:70:ee:50:3f:34:04
2023-08-17 14:20:09.919  - info: netatmo-crawler.0 (7697) Getting data for stationid:70:ee:50:52:e9:96
2023-08-17 14:20:10.497  - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink
2023-08-17 14:20:10.952  - info: netatmo-crawler.0 (7697) Getting data for stationid:70:ee:50:05:53:68
2023-08-17 14:20:12.503  - info: netatmo-crawler.0 (7697) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2023-08-17 14:20:13.056  - info: host.raspi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-08-17 14:20:15.074  - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink
2023-08-17 14:20:33.803  - info: vis.0 (8140) starting. Version 1.4.16 in /opt/iobroker/node_modules/iobroker.vis, node: v18.17.1, js-controller: 5.0.11
2023-08-17 14:20:34.515  - info: vis.0 (8140) vis license is OK.
2023-08-17 14:20:34.919  - info: sayit.0 (8113) starting. Version 3.0.5 in /opt/iobroker/node_modules/iobroker.sayit, node: v18.17.1, js-controller: 5.0.11
2023-08-17 14:20:34.934  - info: sayit.0 (8113) Install process. Upload files and stop.
2023-08-17 14:20:34.937  - info: sayit.0 (8113) Upload announce mp3 files
2023-08-17 14:20:35.236  - info: sayit.0 (8113) stopping...
2023-08-17 14:20:35.243  - info: sayit.0 (8113) terminating
2023-08-17 14:20:35.287  - info: sayit.0 (8113) Terminated (NO_ERROR): Without reason
2023-08-17 14:20:35.745  - info: sayit.0 (8113) terminating
2023-08-17 14:20:35.831  - info: sayit.0 (8113) stopping...
2023-08-17 14:20:36.803  - info: vis.0 (8140) Terminated (NO_ERROR): Without reason
2023-08-17 14:20:41.997  - info: vis-google-fonts.0 (8334) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.vis-google-fonts, node: v18.17.1, js-controller: 5.0.11
2023-08-17 14:20:42.567  - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink
2023-08-17 14:20:42.796  - info: vis-google-fonts.0 (8334) Terminated (NO_ERROR): Without reason
2023-08-17 14:20:46.080  - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink
2023-08-17 14:20:54.716  - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink
2023-08-17 14:21:06.846  - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink

============ Mark until here for C&P =============

iob diag has finished.

[DJMarc75]

@brokeling bitte auch die lange Version in Codetags packen ;)

[brokeling]

@dp20eic
Adapter Neustart mit senetry aus, folgende logs:

zigbee.0
2023-08-17 14:25:05.278	info	Installed Version: iobroker.zigbee@1.8.23

zigbee.0
2023-08-17 14:25:05.278	error	Error herdsman start

zigbee.0
2023-08-17 14:25:05.277	error	Failed to start Zigbee

zigbee.0
2023-08-17 14:25:05.276	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00'"

zigbee.0
2023-08-17 14:25:05.264	info	Starting Zigbee npm ...

zigbee.0
2023-08-17 14:25:05.263	info	Try to reconnect. 1 attempts left

netatmo-crawler.0
2023-08-17 14:25:05.038	info	Getting data for stationid:70:ee:50:3f:34:04

netatmo-crawler.0
2023-08-17 14:25:04.148	info	Getting data for stationid:70:ee:50:29:08:fe

netatmo-crawler.0
2023-08-17 14:25:04.053	info	starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.17.1, js-controller: 5.0.11
host.raspi
2023-08-17 14:25:00.054	info	instance system.adapter.netatmo-crawler.0 started with pid 12682

zigbee.0
2023-08-17 14:24:55.262	info	Installed Version: iobroker.zigbee@1.8.23

zigbee.0
2023-08-17 14:24:55.261	error	Error herdsman start

zigbee.0
2023-08-17 14:24:55.260	error	Failed to start Zigbee

zigbee.0
2023-08-17 14:24:55.259	error	Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00'"

zigbee.0
2023-08-17 14:24:54.480	info	Starting Zigbee npm ...

zigbee.0
2023-08-17 14:24:54.477	info	delete old Backup files. keep only last 10

zigbee.0
2023-08-17 14:24:54.334	info	starting. Version 1.8.23 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.17.1, js-controller: 5.0.11
host.raspi
2023-08-17 14:24:48.573	info	instance system.adapter.zigbee.0 started with pid 12524
host.raspi
2023-08-17 14:24:46.855	info	instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
host.raspi
2023-08-17 14:24:46.307	info	stopInstance system.adapter.zigbee.0 killing pid 1469

zigbee.0
2023-08-17 14:24:46.224	info	debug devices set to []

zigbee.0
2023-08-17 14:24:46.159	info	terminating

zigbee.0
2023-08-17 14:24:46.158	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

zigbee.0
2023-08-17 14:24:46.157	info	terminating

zigbee.0
2023-08-17 14:24:46.156	warn	Failed to stop zigbee during startup

zigbee.0
2023-08-17 14:24:46.127	info	Zigbee: disabling joining new devices.

zigbee.0
2023-08-17 14:24:45.313	info	cleaned everything up...

zigbee.0
2023-08-17 14:24:45.306	info	Got terminate signal TERMINATE_YOURSELF
host.raspi
2023-08-17 14:24:45.304	info	stopInstance system.adapter.zigbee.0 send kill signal
host.raspi
2023-08-17 14:24:45.296	info	stopInstance system.adapter.zigbee.0 (force=false, process=true)

[DJMarc75]

So auf die Schnelle:

@brokeling sagte in Noch ein Zigbee Problem....:

Raspbian GNU/Linux 10 (buster)

alt

@brokeling sagte in Noch ein Zigbee Problem....:

load average: 4.56, 4.04, 1.85

Da läuft was aus dem Ruder

@brokeling sagte in Noch ein Zigbee Problem....:

volt=0.8375V

Original Netzteil ?

@brokeling sagte in Noch ein Zigbee Problem....:

js-controller: 5.0.11

Warum ? Da kann es noch Problemchen geben.

@brokeling sagte in Noch ein Zigbee Problem....:

Pending Updates: 8

mal updaten

[A Former User]

@brokeling sagte in Noch ein Zigbee Problem....:

Adapter Neustart mit senetry aus, folgende logs:

Moin,

ist das korrekt, bei Dir,

/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00

was kommt, wenn Du, ein ls auf das Verzeichnis machst?

ls -la /dev/serial/by-id/

Bei mir sieht das so aus

# ls -la /dev/serial/by-id/
total 0
lrwxrwxrwx 1 root root  13 Aug 17 10:46 usb-Texas_Instruments_XDS110__03.00.00.12__Embed_with_CMSIS-DAP_L1100FRC-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root  13 Aug 17 10:46 usb-Texas_Instruments_XDS110__03.00.00.12__Embed_with_CMSIS-DAP_L1100FRC-if03 -> ../../ttyACM1

VG
Bernd

[brokeling]

@djmarc75

na, ich mach doch immer schön brav die updates

sudo apt update
sudo apt dist-upgrade

warum ist dann nicht die neueste Version drauf?

Dann Netzteil: Da habt ihr mich wieder. Ich hatte es umgesteckt auf eine USV.
Ich habe es SOFORT wieder zurück auf das ORIGINAL.

Und was ist mit dem js-controller: 5.0.11?
Ist der nicht stable?
Hab gerade gesehen, der ist ja noch ganz jung...
Ich führe regelmäßig diese Routine durch:

iobroker stop
iobroker update
iobroker upgrade self
iobroker upgrade
iobroker start

[brokeling]

@dp20eic

pi@raspi:~ $ ls -la /dev/serial/by-id/
insgesamt 0
drwxr-xr-x 2 root root 80 Aug 17 14:13 .
drwxr-xr-x 4 root root 80 Aug 17 14:13 ..
lrwxrwxrwx 1 root root 13 Aug 17 14:13 usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GB8-if00 -> ../../ttyACM0
lrwxrwxrwx 1 root root 13 Aug 17 14:13 usb-Texas_Instruments_XDS110__03.00.00.26__Embed_with_CMSIS-DAP_L1100GB8-if03 -> ../../ttyACM1
pi@raspi:~ $

Die Zahlen stimmen nicht überein.
Muss ich die im Adapter ändern? 18->26?

[DJMarc75]

@brokeling sagte in Noch ein Zigbee Problem....:

Ich führe regelmäßig diese Routine durch:

Das führt lediglich dazu dass Du den Host auf Beta upgradest.
Warum auch immer man den Tester spielen will :thinking_face:

[Thomas Braun]

@brokeling sagte in Noch ein Zigbee Problem....:

warum ist dann nicht die neueste Version drauf?

Weil Ugrades der Distribution nicht so funktionieren.
Da muss man anders herangehen. So z. B.

https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye

[A Former User]

@brokeling sagte in Noch ein Zigbee Problem....:

Die Zahlen stimmen nicht überein.
Muss ich die im Adapter ändern? 18->26?

Moin,

genau, es sollte schon so da stehen, wie es auch im Dateisystem steht ;)

VG
Bernd

[brokeling]

@dp20eic
zigbee jetzt auf alle Fälle grün :+1:

[brokeling]

@thomas-braun
das bullseye update mache ich dann gleich.