Noch ein Zigbee Problem....
-
@arteck
Bei einem Neustart von zigbee gibt es "nur" folgende LOGs (level "warn"):zigbee.0 2023-08-15 13:57:36.533 warn DeviceAvailability:Failed to ping 0xec1bbdfffea186d2 TRADFRI bulb E27 WW 806lm zigbee.0 2023-08-15 13:57:28.103 warn DeviceAvailability:Failed to ping 0x842e14fffe13a855 TS0121 zigbee.0 2023-08-15 13:57:27.972 warn DeviceAvailability:Failed to ping 0xec1bbdfffeaa888d TRADFRI bulb E27 WW 806lm zigbee.0 2023-08-15 13:57:27.739 warn DeviceAvailability:Failed to ping 0x842e14fffe359b01 TS0121 zigbee.0 2023-08-15 13:57:27.633 warn DeviceAvailability:Failed to ping 0xec1bbdfffea17968 TRADFRI bulb E27 WW 806lm zigbee.0 2023-08-15 13:57:27.474 warn DeviceAvailability:Failed to ping 0x00124b001eb0ac7f HOMA1002 zigbee.0 2023-08-15 13:57:27.049 warn DeviceAvailability:Failed to ping 0x842e14fffe52fb42 TS011F zigbee.0 2023-08-15 13:57:25.024 warn DeviceAvailability:Failed to ping 0x842e14fffe13965d TS0121 zigbee.0 2023-08-15 13:57:06.873 warn DeviceAvailability:Failed to ping 0x000d6ffffe04ac2a TRADFRI bulb E27 WS opal 1000lm zigbee.0 2023-08-15 13:57:05.758 warn DeviceAvailability:Failed to ping 0x842e14fffe4028b6 TRADFRI bulb E27 WW 806lm zigbee.0 2023-08-15 13:57:05.549 warn DeviceAvailability:Failed to ping 0xccccccfffee9a795 TRADFRI bulb E27 WW 806lm zigbee.0 2023-08-15 13:57:05.537 warn DeviceAvailability:Failed to ping 0x84b4dbfffe60dc72 TRADFRI bulb E27 WW 806lm zigbee.0 2023-08-15 13:56:59.456 warn Extended PAN ID is reversed (expected=c6b9aa1c004b1200, actual=00124b001caab9c6) zigbee.0 2023-08-15 13:56:51.916 warn Got terminate signal. Checking desired PID: 2833 vs own PID 32153 zigbee.0 2023-08-15 13:56:51.251 warn Got terminate signal. Checking desired PID: 0 vs own PID 32153Zigbee läuft auch einige Stunden und irgendwann merke ich mal, dass (abends) Bewegungsmelder nicht funktionieren...dann ist der Adapter "nicht mehr verbunden mit Gerät oder Dienst".
-
so, jetzt habe ich einige Fehlermeldungen bekommen, weil heute wieder ausgefallen:
einige Fehler dieser Art:
2023-08-16 08:22:02.972 - error: zigbee.0 (2833) Send command to 0x842e14fffe4028b6 failed with no error code (Timeout - 55871 - 1 - 203 - 6 - 11 after 10000ms)dannn
2023-08-16 15:25:54.408 - error: zigbee.0 (2833) Adapter disconnected, stopping 2023-08-16 15:26:04.568 - info: zigbee.0 (2833) Try to reconnect. 5 attempts left 2023-08-16 15:26:04.569 - info: zigbee.0 (2833) Starting Zigbee npm ... 2023-08-16 15:26:04.615 - info: zigbee.0 (2833) Installed Version: iobroker.zigbee@1.8.23 2023-08-16 15:26:05.143 - warn: zigbee.0 (2833) Extended PAN ID is reversed (expected=c6b9aa1c004b1200, actual=00124b001caab9c6) 2023-08-16 15:26:05.438 - info: zigbee.0 (2833) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20210708}} 2023-08-16 15:26:05.439 - info: zigbee.0 (2833) Unable to disable LED, unsupported function. 2023-08-16 15:26:05.442 - info: zigbee.0 (2833) --> transmitPower : high 2023-08-16 15:26:05.457 - info: zigbee.0 (2833) Currently 77 devices are joined: 2023-08-16 15:26:05.526 - info: zigbee.0 (2833) 0x00158d0006f783af (addr 18289): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) 2023-08-16 15:26:05.533 - info: zigbee.0 (2833) 0x842e14fffe13965d (addr 48826): TS0121_plug - TuYa 10A UK or 16A EU smart plug (Router) 2023-08-16 15:26:05.534 - info: zigbee.0 (2833) 0x000d6ffffea04475 (addr 43772): LED1537R6/LED1739R5 - IKEA TRADFRI LED bulb GU10 400 lumen, dimmable, white spectrum (Router) 2023-08-16 15:26:05.535 - info: zigbee.0 (2833) 0x00158d0003d092f2 (addr 64940): RTCGQ01LM - Xiaomi MiJia human body movement sensor (EndDevice) 2023-08-16 15:26:05.536 - info: zigbee.0 (2833) 0x842e14fffe43865c (addr 10074): LED1836G9 - IKEA TRADFRI LED bulb E26/E27 806 lumen, dimmable, warm white (Router) 2023-08-16 15:26:05.537 - info: zigbee.0 (2833) 0x84b4dbfffe60dc72 (addr 14767): LED1836G9 - IKEA TRADFRI LED bulb E26/E27 806 lumen, dimmable, warm white (Router) 2023-08-16 15:26:05.537 - info: zigbee.0 (2833) 0x00158d00045eb857 (addr 34597): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) 2023-08-16 15:26:05.538 - info: zigbee.0 (2833) 0xccccccfffee9a795 (addr 48387): LED1836G9 - IKEA TRADFRI LED bulb E26/E27 806 lumen, dimmable, warm white (Router) 2023-08-16 15:26:05.539 - info: zigbee.0 (2833) 0xa4c138cf19e4844d (addr 60161): IH012-RT01 - TuYa Motion sensor (EndDevice) 2023-08-16 15:26:05.541 - info: zigbee.0 (2833) 0xdc8e95fffe209951 (addr 64746): ZY-M100-L - TuYa Ceiling human breathe sensor (Router) 2023-08-16 15:26:05.543 - info: zigbee.0 (2833) 0xec1bbdfffea186d2 (addr 23525): LED1836G9 - IKEA TRADFRI LED bulb E26/E27 806 lumen, dimmable, warm white (Router) 2023-08-16 15:26:05.546 - info: zigbee.0 (2833) 0xccccccfffea9ccd9 (addr 43883): E1743 - IKEA TRADFRI ON/OFF switch (EndDevice) 2023-08-16 15:26:05.547 - info: zigbee.0 (2833) 0x00158d0007f2be5d (addr 46991): SJCGQ11LM - Xiaomi Aqara water leak sensor (EndDevice) 2023-08-16 15:26:05.547 - info: zigbee.0 (2833) 0x00158d0005d11326 (addr 63299): RTCGQ11LM - Xiaomi Aqara human body movement and illuminance sensor (EndDevice) 2023-08-16 15:26:05.548 - info: zigbee.0 (2833) 0x00158d000586f719 (addr 46272): JTYJ-GD-01LM/BW - Xiaomi MiJia Honeywell smoke detector (EndDevice)...
2023-08-16 15:26:05.601 - info: zigbee.0 (2833) 0x842e14fffe366821 (addr 29187): TS0121_plug - TuYa 10A UK or 16A EU smart plug (Router) 2023-08-16 15:26:05.604 - info: zigbee.0 (2833) 0x2c1165fffe38f9af (addr 30281): HG08164 - Lidl Silvercrest smart button (EndDevice) 2023-08-16 15:26:05.604 - info: zigbee.0 (2833) Zigbee started 2023-08-16 15:26:27.614 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0xccccccfffee9a795 TRADFRI bulb E27 WW 806lm after 5 ping attempts 2023-08-16 15:26:28.144 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0x000d6ffffe04ac2a TRADFRI bulb E27 WS opal 1000lm after 5 ping attempts 2023-08-16 15:26:51.496 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0x00124b001eb0ac7f HOMA1002 after 5 ping attempts 2023-08-16 15:26:51.815 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0x842e14fffe52fb42 TS011F after 5 ping attempts 2023-08-16 15:26:52.292 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0xec1bbdfffeaa888d TRADFRI bulb E27 WW 806lm after 5 ping attempts 2023-08-16 15:27:04.214 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0xec1bbdfffea186d2 TRADFRI bulb E27 WW 806lm after 7 ping attempts 2023-08-16 15:27:04.395 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0x842e14fffe4028b6 TRADFRI bulb E27 WW 806lm after 5 ping attempts 2023-08-16 15:27:06.811 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0xec1bbdfffea17968 TRADFRI bulb E27 WW 806lm after 5 ping attempts 2023-08-16 15:27:11.818 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0x842e14fffe13965d TS0121 after 5 ping attempts 2023-08-16 15:27:12.860 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0x842e14fffe359b01 TS0121 after 5 ping attempts 2023-08-16 15:27:12.970 - warn: zigbee.0 (2833) DeviceAvailability:Stopping to ping 0x842e14fffe13a855 TS0121 after 5 ping attempts 2023-08-16 15:28:31.134 - info: javascript.0 (25651) script.js.common.Bewegungsmelder.BM_WiGa: test 2023-08-16 15:28:31.135 - info: javascript.0 (25651) script.js.common.Bewegungsmelder.BM_WiGa: test2...
2023-08-16 15:31:35.445 - error: zigbee.0 (2833) Adapter disconnected, stopping 2023-08-16 15:31:35.448 - error: zigbee.0 (2833) Adapter disconnected, stopping 2023-08-16 15:31:41.398 - error: zigbee.0 (2833) Send command to 0xa4c138a088bd0652 failed with no error code (SRSP - AF - dataRequest after 6000ms) 2023-08-16 15:31:45.464 - info: zigbee.0 (2833) Try to reconnect. 5 attempts left 2023-08-16 15:31:45.464 - info: zigbee.0 (2833) Starting Zigbee npm ... 2023-08-16 15:31:45.465 - info: zigbee.0 (2833) Try to reconnect. 4 attempts left 2023-08-16 15:31:45.465 - info: zigbee.0 (2833) Starting Zigbee npm ... 2023-08-16 15:31:45.506 - info: zigbee.0 (2833) Installed Version: iobroker.zigbee@1.8.23 2023-08-16 15:31:45.554 - info: zigbee.0 (2833) Installed Version: iobroker.zigbee@1.8.23 2023-08-16 15:31:45.772 - error: zigbee.0 (2833) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-08-16 15:31:45.773 - error: zigbee.0 (2833) Failed to start Zigbee 2023-08-16 15:31:45.773 - error: zigbee.0 (2833) Error herdsman start 2023-08-16 15:31:45.978 - warn: zigbee.0 (2833) Extended PAN ID is reversed (expected=c6b9aa1c004b1200, actual=00124b001caab9c6) 2023-08-16 15:31:46.009 - error: zigbee.0 (2833) Starting zigbee-herdsman problem : "Cannot read properties of undefined (reading 'execute')" 2023-08-16 15:31:46.010 - error: zigbee.0 (2833) Failed to start Zigbee 2023-08-16 15:31:46.010 - error: zigbee.0 (2833) Error herdsman start 2023-08-16 15:31:55.776 - info: zigbee.0 (2833) Try to reconnect. 3 attempts left 2023-08-16 15:31:55.777 - info: zigbee.0 (2833) Starting Zigbee npm ... 2023-08-16 15:31:55.815 - info: zigbee.0 (2833) Installed Version: iobroker.zigbee@1.8.23 2023-08-16 15:31:56.014 - info: zigbee.0 (2833) Try to reconnect. 2 attempts left 2023-08-16 15:31:56.015 - info: zigbee.0 (2833) Starting Zigbee npm ... 2023-08-16 15:31:56.024 - error: zigbee.0 (2833) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-08-16 15:31:56.024 - error: zigbee.0 (2833) Failed to start Zigbee 2023-08-16 15:31:56.025 - error: zigbee.0 (2833) Error herdsman start 2023-08-16 15:31:56.078 - info: zigbee.0 (2833) Installed Version: iobroker.zigbee@1.8.23 2023-08-16 15:31:56.246 - error: zigbee.0 (2833) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-08-16 15:31:56.247 - error: zigbee.0 (2833) Failed to start Zigbee 2023-08-16 15:31:56.247 - error: zigbee.0 (2833) Error herdsman start 2023-08-16 15:32:06.026 - info: zigbee.0 (2833) Try to reconnect. 1 attempts left 2023-08-16 15:32:06.027 - info: zigbee.0 (2833) Starting Zigbee npm ... 2023-08-16 15:32:06.065 - info: zigbee.0 (2833) Installed Version: iobroker.zigbee@1.8.23 2023-08-16 15:32:06.233 - error: zigbee.0 (2833) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-08-16 15:32:06.234 - error: zigbee.0 (2833) Failed to start Zigbee 2023-08-16 15:32:06.234 - error: zigbee.0 (2833) Error herdsman start 2023-08-16 15:32:06.248 - info: zigbee.0 (2833) Try to reconnect. 0 attempts left 2023-08-16 15:32:06.249 - info: zigbee.0 (2833) Starting Zigbee npm ... 2023-08-16 15:32:06.298 - info: zigbee.0 (2833) Installed Version: iobroker.zigbee@1.8.23 2023-08-16 15:32:06.453 - error: zigbee.0 (2833) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'" 2023-08-16 15:32:06.454 - error: zigbee.0 (2833) Failed to start Zigbee 2023-08-16 15:32:06.455 - error: zigbee.0 (2833) Error herdsman start 2023-08-16 15:33:42.919 - info: sql.0 (25822) Do not store value "NULL" for PM10 Outdoor because no number -
Wäre schön, wenn sich hier noch jemand einschalten könnte, der die Probleme analysieren kann!
-
@brokeling welcher Coordinator ..welche Foirmware ist drauf ?
-
@arteck
es ist folgendes Texas Instruments Gerät:
LAUNCHXL-CC26X2R1
Am Adapter auslesen kann ich:
usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00Wie ich auf die Firmware komme, weiß ich nicht...da hab ich aber noch nie ein Update gemacht. Kann es daran liegen und wie mache ich ein update?
-
@brokeling sagte in Noch ein Zigbee Problem....:
Wie ich auf die Firmware komme, weiß ich nicht...da hab ich aber noch nie ein Update gemacht. Kann es daran liegen und wie mache ich ein update?
Moin,
steht im Log
Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20210708}}Bei mir, aber schon älter, aus 2020
Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20200417}}VG
Bernd -
@brokeling das kannst du in der kachel sehen oder im Log was ich gerade übersehen habe
aber
aktualisiere mal die Firmware
-
@brokeling sagte in Noch ein Zigbee Problem....:
Kann es daran liegen und wie mache ich ein update?
Moin,
mal den groben Ablauf:
uniflashpassend für Dein Betriebssystem von TI herunterladen- das passende, aktuelle Firmware File herunterladen
- das Board per USB an Deinen Rechner anschließen
uniflashstarten und den Anweisungen folgen
VG
Bernd -
danach adapter starten und WARTEN... wichtig .. nicht ungeduldig werden... WARTEN
auch wenn nicht sofort alle Geräte da sind.. WARTEN.. -
Vielen lieben Dank für die Hilfe!
Jetzt bin ich aber unschlüssig welche FW passt, denn die
CC26X2R1 steht so ja nicht dabei...
Also
wahrscheinlich die letztere = CC2652R_..., oder? -
-
@thomas-braun
Doch, der ist dabei (Development Board) und es wird auf dieselbe Coordinator Firmware verwiesen (CC2652R_...), passt also! -
Update erfolgreich!
Aber Adapter macht doch noch Schwierigkeiten.
Zunächst war er auf grün. Die Geräte ließen sich aber nicht ansteuern.
Dann aber wieder Probleme. Bei neustart:89 8 Log-Größe: 1.7 MB 1 Zeit warn Nachricht zigbee.0 2023-08-17 13:03:53.692 error Error herdsman start zigbee.0 2023-08-17 13:03:53.691 error Failed to start Zigbee zigbee.0 2023-08-17 13:03:53.690 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00'" zigbee.0 2023-08-17 13:03:43.663 error Error herdsman start zigbee.0 2023-08-17 13:03:43.662 error Failed to start Zigbee zigbee.0 2023-08-17 13:03:43.660 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00'" -
@brokeling sagte in Noch ein Zigbee Problem....:
Ich habe jetzt auch ein Zigbee Problem, das mit einem Update zusammenhängen könnte.
Moin,
vielleicht solltest Du nochmals genauer beschreiben, was Du gemacht hast, also welche Updates und wie!
Dann einmal auch die Langfassung von
iob diagDann den Adapter mal im Debug Mode starten.
Das
senetryfür den Adapter ausschalten.
VG
Bernd -
Das Update über Unifash von TI
Firmware: CC2652R_coordinator_20230507.hex
Raspi zunächst stromlos, dann Neustart mit angedockten ISB TI Controller.pi@raspi:~ $ iob diag iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>|<adapter>] Starts the js-controller or a specified adapter instance or all instances of an adapter iobroker stop [<adapter>.<instance>|<adapter>] stops the js-controller or a specified adapter instance or all instances of an adapter iobroker restart [<adapter>.<instance>|<adapter>] Restarts js-controller or a specified adapter instance or all instances of an adapter [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker vendor <passphrase> [<vendor.json>] Update the vendor information using given passphrase iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean] pi@raspi:~ $ -
iob stop iob fix sudo reboot iob diag -
@djmarc75
Summary:======================= SUMMARY ======================= v.2023-04-16 Operatingsystem: Raspbian GNU/Linux 10 (buster) Kernel: 5.10.103-v7l+ Installation: Native Timezone: Europe/Berlin (CEST, +0200) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 8 Pending iob updates: 5 Nodejs-Installation: /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 Recommended versions are nodejs 18.x.y and npm 9.x.y Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 3.8G 1.6G 1.2G 8.0M 921M 2.0G Swap: 99M 0B 99M Total: 3.9G 1.6G 1.3G Active iob-Instances: 33 Active repo(s): beta ioBroker Core: js-controller 5.0.11 admin 6.7.2 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: redis Status admin and web instance: + system.adapter.admin.1 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin Objects: 17066 States: 12808 Size of iob-Database: 22M /opt/iobroker/iobroker-data/objects.jsonl 8.4M /opt/iobroker/iobroker-data/objects.json.migrated 8.4M /opt/iobroker/iobroker-data/objects.json.bak.migrated 12K /opt/iobroker/iobroker-data/objects.json.old 41M /opt/iobroker/iobroker-data/states.json.old 41M /opt/iobroker/iobroker-data/states.json.bak 0 /opt/iobroker/iobroker-data/states.json =================== END OF SUMMARY ====================lange Version:
======== Start marking the full check here ========= Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : armv7l Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 14:19:25 up 5 min, 1 user, load average: 4.56, 4.04, 1.85 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=64.2'C volt=0.8375V *** Time and Time Zones *** Local time: Thu 2023-08-17 14:19:25 CEST Universal time: Thu 2023-08-17 12:19:25 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.6G 1.3G 8.0M 918M 2.1G Swap: 99M 0B 99M Total: 3.9G 1.6G 1.4G 3786 M total memory 1568 M used memory 363 M active memory 1974 M inactive memory 1298 M free memory 109 M buffer memory 809 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 117G 17G 94G 16% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 1.9G 8.6M 1.9G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sdb1 ext4 113G 71G 37G 66% /backup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 379M 0 379M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Aug 17 14:13:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:40:0F:7D vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Thu Aug 17 14:13:42 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [Thu Aug 17 14:13:42 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Thu Aug 17 14:13:43 2023] EXT4-fs (sda2): re-mounted. Opts: (null) [Thu Aug 17 14:13:46 2023] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime,stripe=8191 |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 |-/backup /dev/sdb1 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 5.8G /var/ 3.4G /var/cache 3.3G /var/cache/apt/archives 3.3G /var/cache/apt 2.4G /var/lib Archived and active journals take up 8.0M in the file system. /opt/iobroker/backups: 2.9G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 1.1G /opt/iobroker/iobroker-data/ 541M /opt/iobroker/iobroker-data/backup-objects 383M /opt/iobroker/iobroker-data/files 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png 52M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 41M /opt/iobroker/iobroker-data/states.json.old 41M /opt/iobroker/iobroker-data/states.json.bak 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 22M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 16.20.2-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 14.21.3-deb-1nodesource1 500 500 https://deb.nodesource.com/node_14.x buster/main armhf Packages 12.22.12-deb-1nodesource1 500 500 https://deb.nodesource.com/node_12.x buster/main armhf Packages 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: redis MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 5.0.11 admin: 6.7.2 javascript: 7.1.4 Adapters from github: 3 Adapter State + system.adapter.admin.1 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alias-manager.0 : alias-manager : raspi - enabled + system.adapter.backitup.0 : backitup : raspi - enabled + system.adapter.chromecast.0 : chromecast : raspi - enabled + system.adapter.cloud.0 : cloud : raspi - enabled system.adapter.deconz.0 : deconz : raspi - disabled, port: 80 system.adapter.devices.0 : devices : raspi - enabled + system.adapter.discovery.0 : discovery : raspi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspi - disabled system.adapter.feiertage.0 : feiertage : raspi - enabled system.adapter.flot.0 : flot : raspi - enabled system.adapter.fritzdect.0 : fritzdect : raspi - disabled system.adapter.hue-extended.0 : hue-extended : raspi - disabled system.adapter.hue.0 : hue : raspi - disabled, port: 443 system.adapter.ical.0 : ical : raspi - enabled system.adapter.icons-icons8.0 : icons-icons8 : raspi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspi - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspi - enabled system.adapter.iqontrol.0 : iqontrol : raspi - disabled + system.adapter.javascript.0 : javascript : raspi - enabled system.adapter.luftdaten.0 : luftdaten : raspi - enabled system.adapter.luftdaten.1 : luftdaten : raspi - enabled system.adapter.mqtt.0 : mqtt : raspi - disabled, port: 1884, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : raspi - enabled + system.adapter.netatmo-crawler.0 : netatmo-crawler : raspi - enabled + system.adapter.nuki.0 : nuki : raspi - enabled + system.adapter.onvif.0 : onvif : raspi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.ping.0 : ping : raspi - enabled + system.adapter.pushover.0 : pushover : raspi - enabled + system.adapter.reolink.0 : reolink : raspi - enabled + system.adapter.reolink.1 : reolink : raspi - enabled + system.adapter.reolink.2 : reolink : raspi - enabled + system.adapter.reolink.3 : reolink : raspi - enabled + system.adapter.reolink.4 : reolink : raspi - enabled system.adapter.samsung_tizen.0 : samsung_tizen : raspi - enabled, port: 8002 + system.adapter.sayit.0 : sayit : raspi - enabled + system.adapter.sayit.1 : sayit : raspi - enabled + system.adapter.sayit.2 : sayit : raspi - enabled + system.adapter.sayit.3 : sayit : raspi - enabled + system.adapter.sayit.4 : sayit : raspi - enabled + system.adapter.sayit.5 : sayit : raspi - enabled + system.adapter.shelly.0 : shelly : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspi - enabled, port: 8087, bind: 0.0.0.0, run as: admin system.adapter.smartcontrol.0 : smartcontrol : raspi - disabled + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspi - enabled + system.adapter.spotify-premium.0 : spotify-premium : raspi - enabled + system.adapter.sql.0 : sql : raspi - enabled, port: 0 system.adapter.statistics.0 : statistics : raspi - enabled + system.adapter.telegram.0 : telegram : raspi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.0 : text2command : raspi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : raspi - enabled system.adapter.vis-history.0 : vis-history : raspi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspi - enabled system.adapter.vis-justgage.0 : vis-justgage : raspi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspi - enabled system.adapter.vis-metro.0 : vis-metro : raspi - enabled system.adapter.vis-rgraph.0 : vis-rgraph : raspi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspi - enabled system.adapter.vis.0 : vis : raspi - enabled + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : raspi - enabled + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00 + instance is alive Enabled adapters with bindings + system.adapter.admin.1 : admin : raspi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.onvif.0 : onvif : raspi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 system.adapter.samsung_tizen.0 : samsung_tizen : raspi - enabled, port: 8002 + system.adapter.shelly.0 : shelly : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : raspi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.sql.0 : sql : raspi - enabled, port: 0 + system.adapter.telegram.0 : telegram : raspi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.8.3 , installed 6.7.2 [Updatable] Adapter "alias-manager": 1.2.6 , installed 1.2.6 Adapter "asterisk" : 1.0.6 , installed 1.0.6 Adapter "backitup" : 2.7.0 , installed 2.6.23 [Updatable] Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "countdown" : 2.1.0 , installed 2.0.1 [Updatable] Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "digitalstrom" : 2.3.0 , installed 2.3.0 Adapter "discovery" : 3.2.0 , installed 3.2.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "hue" : 3.9.6 , installed 3.9.3 [Updatable] Adapter "hue-extended" : 2.0.0 , installed 2.0.0 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iqontrol" : 2.3.0 , installed 2.2.0 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.11 , installed 5.0.11 Adapter "luftdaten" : 3.0.0 , installed 3.0.0 Adapter "moma" : 1.2.9 , installed 1.2.9 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mydlink" : 1.3.2 , installed 1.3.2 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "nuki-extended": 2.6.5 , installed 2.6.5 Adapter "octoprint" : 5.0.1 , installed 5.0.1 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "owntracks" : 1.0.5 , installed 1.0.5 Adapter "paw" : 0.3.2 , installed 0.3.2 Adapter "ph803w" : 1.1.1 , installed 1.1.1 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.4 , installed 3.0.4 Adapter "samsung" : 0.5.11 , installed 0.5.11 Adapter "sayit" : 3.0.5 , installed 3.0.5 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartcontrol" : 1.3.2 , installed 1.3.2 Adapter "socketio" : 6.5.2 , installed 6.5.2 Adapter "sonoff" : 2.5.7 , installed 2.5.7 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "spotify-premium": 1.2.2 , installed 1.2.2 Adapter "sql" : 2.2.0 , installed 2.2.0 Adapter "statistics" : 2.3.0 , installed 2.3.0 Adapter "telegram" : 1.16.0 , installed 1.16.0 Adapter "text2command" : 3.0.2 , installed 3.0.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "web" : 6.1.0 , installed 6.1.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wiobrowser" : 2.0.1 , installed 2.0.1 Adapter "ws" : 2.5.3 , installed 2.5.3 Adapter "zigbee" : 1.8.23 , installed 1.8.23 Objects and States Please stand by - This may take a while Objects: 17066 States: 12808 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 http://archive.raspberrypi.org/debian buster InRelease Hit:4 https://deb.nodesource.com/node_12.x buster InRelease Hit:5 https://deb.nodesource.com/node_14.x buster InRelease Hit:6 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:7 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 8 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 119 19462 568/motion tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 18473 374/deCONZ tcp 0 0 0.0.0.0:8083 0.0.0.0:* LISTEN 119 18490 568/motion tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 20173 709/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 18483 388/cupsd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 22385 1418/io.sonoff.0 tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 17607 374/deCONZ tcp 0 0 192.168.178.53:9092 0.0.0.0:* LISTEN 1001 28921 2139/io.nuki.0 tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 18204 736/iobroker.js-con tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 110 20247 764/mysqld tcp 0 0 0.0.0.0:6379 0.0.0.0:* LISTEN 118 17803 717/redis-server 0. tcp6 0 0 :::8081 :::* LISTEN 1001 18345 1042/io.admin.1 tcp6 0 0 :::8082 :::* LISTEN 1001 25805 1789/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 20175 709/sshd tcp6 0 0 :::8087 :::* LISTEN 1001 31564 3271/io.simple-api. tcp6 0 0 ::1:631 :::* LISTEN 0 18482 388/cupsd tcp6 0 0 ::1:6379 :::* LISTEN 118 17804 717/redis-server 0. udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 24368 1753/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16243 698/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 17398 491/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 24971 1499/io.chromecast. udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 16027 382/avahi-daemon: r udp 0 0 0.0.0.0:55070 0.0.0.0:* 108 16029 382/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 17630 374/deCONZ udp6 0 0 :::546 :::* 0 16265 698/dhcpcd udp6 0 0 :::5353 :::* 108 16028 382/avahi-daemon: r udp6 0 0 :::49038 :::* 108 16030 382/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-08-17 14:20:07.253 - info: netatmo-crawler.0 (7697) Getting data for stationid:70:ee:50:29:08:fe 2023-08-17 14:20:08.850 - info: netatmo-crawler.0 (7697) Getting data for stationid:70:ee:50:3f:34:04 2023-08-17 14:20:09.919 - info: netatmo-crawler.0 (7697) Getting data for stationid:70:ee:50:52:e9:96 2023-08-17 14:20:10.497 - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 14:20:10.952 - info: netatmo-crawler.0 (7697) Getting data for stationid:70:ee:50:05:53:68 2023-08-17 14:20:12.503 - info: netatmo-crawler.0 (7697) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-08-17 14:20:13.056 - info: host.raspi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-08-17 14:20:15.074 - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 14:20:33.803 - info: vis.0 (8140) starting. Version 1.4.16 in /opt/iobroker/node_modules/iobroker.vis, node: v18.17.1, js-controller: 5.0.11 2023-08-17 14:20:34.515 - info: vis.0 (8140) vis license is OK. 2023-08-17 14:20:34.919 - info: sayit.0 (8113) starting. Version 3.0.5 in /opt/iobroker/node_modules/iobroker.sayit, node: v18.17.1, js-controller: 5.0.11 2023-08-17 14:20:34.934 - info: sayit.0 (8113) Install process. Upload files and stop. 2023-08-17 14:20:34.937 - info: sayit.0 (8113) Upload announce mp3 files 2023-08-17 14:20:35.236 - info: sayit.0 (8113) stopping... 2023-08-17 14:20:35.243 - info: sayit.0 (8113) terminating 2023-08-17 14:20:35.287 - info: sayit.0 (8113) Terminated (NO_ERROR): Without reason 2023-08-17 14:20:35.745 - info: sayit.0 (8113) terminating 2023-08-17 14:20:35.831 - info: sayit.0 (8113) stopping... 2023-08-17 14:20:36.803 - info: vis.0 (8140) Terminated (NO_ERROR): Without reason 2023-08-17 14:20:41.997 - info: vis-google-fonts.0 (8334) starting. Version 1.0.4 in /opt/iobroker/node_modules/iobroker.vis-google-fonts, node: v18.17.1, js-controller: 5.0.11 2023-08-17 14:20:42.567 - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 14:20:42.796 - info: vis-google-fonts.0 (8334) Terminated (NO_ERROR): Without reason 2023-08-17 14:20:46.080 - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 14:20:54.716 - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink 2023-08-17 14:21:06.846 - info: javascript.0 (1115) script.js.common.Akustischer_Alarm____Steuerung_Haus._Alarmauslösung_Cams: Alarm durch Reolink ============ Mark until here for C&P ============= iob diag has finished. -
@brokeling bitte auch die lange Version in Codetags packen
-
@dp20eic
Adapter Neustart mit senetry aus, folgende logs:zigbee.0 2023-08-17 14:25:05.278 info Installed Version: iobroker.zigbee@1.8.23 zigbee.0 2023-08-17 14:25:05.278 error Error herdsman start zigbee.0 2023-08-17 14:25:05.277 error Failed to start Zigbee zigbee.0 2023-08-17 14:25:05.276 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00'" zigbee.0 2023-08-17 14:25:05.264 info Starting Zigbee npm ... zigbee.0 2023-08-17 14:25:05.263 info Try to reconnect. 1 attempts left netatmo-crawler.0 2023-08-17 14:25:05.038 info Getting data for stationid:70:ee:50:3f:34:04 netatmo-crawler.0 2023-08-17 14:25:04.148 info Getting data for stationid:70:ee:50:29:08:fe netatmo-crawler.0 2023-08-17 14:25:04.053 info starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.17.1, js-controller: 5.0.11 host.raspi 2023-08-17 14:25:00.054 info instance system.adapter.netatmo-crawler.0 started with pid 12682 zigbee.0 2023-08-17 14:24:55.262 info Installed Version: iobroker.zigbee@1.8.23 zigbee.0 2023-08-17 14:24:55.261 error Error herdsman start zigbee.0 2023-08-17 14:24:55.260 error Failed to start Zigbee zigbee.0 2023-08-17 14:24:55.259 error Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.18__Embed_with_CMSIS-DAP_L1100GB8-if00'" zigbee.0 2023-08-17 14:24:54.480 info Starting Zigbee npm ... zigbee.0 2023-08-17 14:24:54.477 info delete old Backup files. keep only last 10 zigbee.0 2023-08-17 14:24:54.334 info starting. Version 1.8.23 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.17.1, js-controller: 5.0.11 host.raspi 2023-08-17 14:24:48.573 info instance system.adapter.zigbee.0 started with pid 12524 host.raspi 2023-08-17 14:24:46.855 info instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) host.raspi 2023-08-17 14:24:46.307 info stopInstance system.adapter.zigbee.0 killing pid 1469 zigbee.0 2023-08-17 14:24:46.224 info debug devices set to [] zigbee.0 2023-08-17 14:24:46.159 info terminating zigbee.0 2023-08-17 14:24:46.158 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2023-08-17 14:24:46.157 info terminating zigbee.0 2023-08-17 14:24:46.156 warn Failed to stop zigbee during startup zigbee.0 2023-08-17 14:24:46.127 info Zigbee: disabling joining new devices. zigbee.0 2023-08-17 14:24:45.313 info cleaned everything up... zigbee.0 2023-08-17 14:24:45.306 info Got terminate signal TERMINATE_YOURSELF host.raspi 2023-08-17 14:24:45.304 info stopInstance system.adapter.zigbee.0 send kill signal host.raspi 2023-08-17 14:24:45.296 info stopInstance system.adapter.zigbee.0 (force=false, process=true) -
So auf die Schnelle:
@brokeling sagte in Noch ein Zigbee Problem....:
Raspbian GNU/Linux 10 (buster)
alt
@brokeling sagte in Noch ein Zigbee Problem....:
load average: 4.56, 4.04, 1.85
Da läuft was aus dem Ruder
@brokeling sagte in Noch ein Zigbee Problem....:
volt=0.8375V
Original Netzteil ?
@brokeling sagte in Noch ein Zigbee Problem....:
js-controller: 5.0.11
Warum ? Da kann es noch Problemchen geben.
@brokeling sagte in Noch ein Zigbee Problem....:
Pending Updates: 8
mal updaten
