RPI 4 Update auf ?
-
@bob-der-1 sagte in RPI 4 Update auf ?:
Gemessen 5.05volt
könnte etwas knapp sein.
und die übrigen Antworten?
-
Ausser der SSD nichts,klar die aber am USB 3.
Kann natürlich nachstellen,zw.5.05 umd 5.1V kann das aber ein Messfehler sein.Kann ihn aber auch testweise umhängen,im Kasten sind noch 2 Netzteile
-
@bob-der-1 sagte in RPI 4 Update auf ?:
die aber am USB 3.
dann häng die mal an den USB2!
Der USB3 ist beim Pi4 wegen HF Interferenzn nicht zu empfehlen. -
- Aktuelle Core temp. 63°C
- SSD hängt nun an USB 2
- Das Netzteil läuft nun auf 5,1 Volt
der neue Kühler kommt morgen,abwarten was es bringt.
-
Neuer Kühler installiert....51°C.
Keine Verbessung,auch nicht beim Abschalten vom FritzBox Checkp. Adapter.... -
@bob-der-1 sagte in RPI 4 Update auf ?:
Keine Verbessung,auch nicht beim Abschalten vom FritzBox Checkp. Adapter....
Moin,
bitte die Aussagen mit Informationen unterlegen, also die Sachen posten, die Du oben schon einmal gepostet hast.
# iob diag # iotop # topMit
Webifmeinst Du das WEB Interface, alsohttp://iobroker:8081? Das ist ja dann evtl. eher ein Netzwerkproblem, was befindet sich denn da noch so in Deinem Netzwerk, ist der RasPI evtl. nur mit 100 MBit angebunden.VG
Bernd -
@dp20eic
Morgen,bin jetzt beim Nachtdienst.
-
@dp20eic sagte in RPI 4 Update auf ?:
toptop - 10:58:52 up 4 min, 1 user, load average: 5.95, 3.45, 1.45 Tasks: 197 total, 5 running, 192 sleeping, 0 stopped, 0 zombie %Cpu(s): 49.6 us, 6.9 sy, 0.0 ni, 41.1 id, 0.0 wa, 0.0 hi, 2.5 si, 0.0 st MiB Mem : 7811.3 total, 4275.8 free, 2696.0 used, 839.5 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 4992.5 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 577 iobroker 20 0 1244720 492500 41800 R 73.8 6.2 3:31.86 iobroker.js-con 919 iobroker 20 0 989960 300936 36332 R 55.0 3.8 1:48.71 io.javascript.0 1613 iobroker 20 0 5005852 81736 38176 S 27.5 1.0 0:10.74 io.fb-checkpres 1055 iobroker 20 0 700696 137984 36580 S 15.6 1.7 0:35.58 io.shelly.0 2250 iobroker 20 0 810368 82152 37672 S 14.6 1.0 0:09.95 io.tankerkoenig 999 iobroker 20 0 858636 216748 36324 S 12.6 2.7 0:26.02 io.mqtt.0 945 iobroker 20 0 946452 82908 37452 S 12.3 1.0 0:12.64 io.alexa2.0 861 iobroker 20 0 949896 154404 43104 S 5.3 1.9 0:22.21 io.admin.0 900 iobroker 20 0 700108 79128 36268 R 4.3 1.0 0:12.41 io.history.0 2638 iobroker 20 0 689712 94408 42232 S 2.3 1.2 0:10.00 io.upnp.0 984 iobroker 20 0 680056 76936 36448 R 1.7 1.0 0:10.67 io.modbus.0 1025 iobroker 20 0 676380 70712 36420 S 1.0 0.9 0:06.42 io.ping.0 1353 iobroker 20 0 677696 72436 36896 S 0.7 0.9 0:06.69 io.deconz.0 1537 iobroker 20 0 674896 77220 36324 S 0.7 1.0 0:07.82 io.energiefluss 1683 iobroker 20 0 673712 67748 36968 S 0.7 0.8 0:06.08 io.fritzdect.0 2071 iobroker 20 0 5160044 96132 38992 S 0.7 1.2 0:09.55 io.ring.0 2099 iobroker 20 0 672864 68712 36404 S 0.7 0.9 0:06.76 io.sma-em.0 2671 iobroker 20 0 672308 66408 36432 S 0.7 0.8 0:03.58 io.vis-inventwo 15 root 20 0 0 0 0 I 0.3 0.0 0:01.19 rcu_preempt 54 root 20 0 0 0 0 D 0.3 0.0 0:01.56 kworker/2:1+events_freezable 101 root -51 0 0 0 0 S 0.3 0.0 0:00.74 irq/38-mmc0 1140 iobroker 20 0 682880 78832 36268 S 0.3 1.0 0:09.63 io.sonoff.0 1220 iobroker 20 0 4882688 88860 43188 S 0.3 1.1 0:06.83 io.backitup.0 3026 pi 20 0 7016 2856 2324 R 0.3 0.0 0:00.14 top 1 root 20 0 165224 10340 7436 S 0.0 0.1 0:02.69 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kthreadd 3 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 netns 7 root 20 0 0 0 0 I 0.0 0.0 0:00.00 kworker/0:0-events 8 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/0:0H-kblockd 9 root 20 0 0 0 0 I 0.0 0.0 0:02.30 kworker/u8:0-events_unbound 10 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 I 0.0 0.0 0:00.00 rcu_tasks_kthread 12 root 20 0 0 0 0 I 0.0 0.0 0:00.00 rcu_tasks_rude_kthread 13 root 20 0 0 0 0 I 0.0 0.0 0:00.00 rcu_tasks_trace_kthread 14 root 20 0 0 0 0 S 0.0 0.0 0:00.14 ksoftirqd/0 16 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 17 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/0 18 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/1 19 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1 20 root 20 0 0 0 0 S 0.0 0.0 0:00.08 ksoftirqd/1 21 root 20 0 0 0 0 I 0.0 0.0 0:00.00 kworker/1:0-rcu_gp 22 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/1:0H-kblockd 23 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/2 24 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/2 25 root 20 0 0 0 0 S 0.0 0.0 0:00.08 ksoftirqd/2 26 root 20 0 0 0 0 I 0.0 0.0 0:00.00 kworker/2:0-cgroup_destroy 27 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/2:0H-kblockd 28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/3 29 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/3 30 root 20 0 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/3 31 root 20 0 0 0 0 I 0.0 0.0 0:00.00 kworker/3:0-events 32 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/3:0H-events_highpri 33 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfsiotop
Total DISK READ: 0.00 B/s | Total DISK WRITE: 11.99 K/s Current DISK READ: 0.00 B/s | Current DISK WRITE: 19.18 K/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO> COMMAND 108 ?sys root 0.00 B/s 9.59 K/s ?unavailable? [jbd2/sda2-8] 577 ?sys iobroker 0.00 B/s 2.40 K/s ?unavailable? iobroker.js-controller 1 ?sys root 0.00 B/s 0.00 B/s ?unavailable? init 2 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kthreadd] 3 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [rcu_gp] 4 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [rcu_par_gp] 5 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [slub_flushwq] 6 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [netns] 8 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/0:0H-kblockd] 9 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/u8:0-events_unbound] 10 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [mm_percpu_wq] 11 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [rcu_tasks_kthread] 12 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [rcu_tasks_rude_kthread] 13 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [rcu_tasks_trace_kthread] 14 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [ksoftirqd/0] 15 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [rcu_preempt] 16 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [migration/0] 17 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [cpuhp/0] 18 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [cpuhp/1] 19 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [migration/1] 20 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [ksoftirqd/1] 22 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/1:0H-kblockd] 23 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [cpuhp/2] 24 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [migration/2] 25 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [ksoftirqd/2] 27 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/2:0H-kblockd] 28 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [cpuhp/3] 29 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [migration/3] 30 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [ksoftirqd/3] 31 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/3:0-events] 32 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/3:0H-events_highpri] 33 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kdevtmpfs] 34 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [inet_frag_wq] 36 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kauditd] 38 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [khungtaskd] 39 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/u8:1-writeback] 40 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [oom_reaper] 41 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [writeback] 42 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kcompactd0] 43 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kintegrityd] 44 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kblockd] 45 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [blkcg_punt_bio] 46 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [watchdogd] 47 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/u8:2-events_unbound] 49 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/3:1H-kblockd] 50 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [rpciod] 51 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [xprtiod] 54 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/2:1-events_freezable] 55 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kswapd0] 56 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [nfsiod] 57 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kthrotld] 60 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/3:2-events] 62 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/0:3-events] 63 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/0:4-events] 65 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [kworker/1:2-mm_percpu_wq] 66 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [hwrng] 67 ?sys root 0.00 B/s 0.00 B/s ?unavailable? [iscsi_conn_clea]Iob diag
*** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 11:00:39 up 6 min, 1 user, load average: 2.01, 2.88, 1.48 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=48.4'C volt=0.9460V *** Time and Time Zones *** Local time: Mon 2023-08-14 11:00:40 CEST Universal time: Mon 2023-08-14 09:00:40 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.8G 2.6G 4.3G 1.0M 843M 5.1G Swap: 99M 0B 99M Total: 7.9G 2.6G 4.4G 7811 M total memory 2632 M used memory 2693 M active memory 598 M inactive memory 4334 M free memory 97 M buffer memory 746 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 110G 6.4G 99G 7% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 31M 225M 13% /boot tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Aug 14 10:54:08 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:E2:27:44 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=80339489-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Aug 14 10:54:13 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Aug 14 10:54:13 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [Mon Aug 14 10:54:16 2023] EXT4-fs (sda2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 1.3G /var/ 766M /var/log 729M /var/log/journal/f5220850684b470b91348abf7842fc45 729M /var/log/journal 301M /var/cache Archived and active journals take up 728.0M in the file system. /opt/iobroker/backups: 661M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 863M /opt/iobroker/iobroker-data/ 495M /opt/iobroker/iobroker-data/files 279M /opt/iobroker/iobroker-data/backup-objects 88M /opt/iobroker/iobroker-data/files/echarts.admin 57M /opt/iobroker/iobroker-data/files/echarts The five largest files in iobroker-data are: 62M /opt/iobroker/iobroker-data/states.jsonl 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 28M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.17.1 /usr/bin/node v18.17.1 /usr/bin/npm 9.6.7 /usr/bin/npx 9.6.7 nodejs: Installed: 18.17.1-deb-1nodesource1 Candidate: 18.17.1-deb-1nodesource1 Version table: *** 18.17.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.1.1 Adapters from github: 5 Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port:xxxx , bind: xxx, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled system.adapter.alias-manager.0 : alias-manager : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled system.adapter.broadlink2.0 : broadlink2 : raspberrypi - disabled system.adapter.bydbatt.0 : bydbatt : raspberrypi - disabled system.adapter.daswetter.0 : daswetter : raspberrypi - enabled + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: 80 + system.adapter.device-reminder.0 : device-reminder : raspberrypi - enabled + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.echarts.0 : echarts : raspberrypi - enabled + system.adapter.email.0 : email : raspberrypi - enabled + system.adapter.energiefluss.0 : energiefluss : raspberrypi - enabled system.adapter.enigma2.0 : enigma2 : raspberrypi - disabled system.adapter.enigma2.1 : enigma2 : raspberrypi - disabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled system.adapter.gartenbewaesserung.0 : gartenbewaesserung : raspberrypi - disabled + system.adapter.history.0 : history : raspberrypi - enabled system.adapter.homeconnect.0 : homeconnect : raspberrypi - disabled system.adapter.homekit-controller.0 : homekit-controller : raspberrypi - disabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.lg-thinq.0 : lg-thinq : raspberrypi - enabled + system.adapter.lgtv.0 : lgtv : raspberrypi - enabled + system.adapter.linux-control.0 : linux-control : raspberrypi - enabled system.adapter.mihome-cloud.0 : mihome-cloud : raspberrypi - disabled system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - disabled, port: xxxx system.adapter.mihome.0 : mihome : raspberrypi - disabled, port: xxxx, bind: 192.168.178.70 + system.adapter.modbus.0 : modbus : raspberrypi - enabled + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0 system.adapter.netatmo-crawler.0 : netatmo-crawler : raspberrypi - enabled + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : raspberrypi - enabled system.adapter.parcel.0 : parcel : raspberrypi - disabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.plex.0 : plex : raspberrypi - enabled + system.adapter.ring.0 : ring : raspberrypi - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: xxxx, bind: xxx + system.adapter.signal-cmb.0 : signal-cmb : raspberrypi - enabled + system.adapter.sma-em.0 : sma-em : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: xxx, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: xxxx, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.upnp.0 : upnp : raspberrypi - enabled system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : raspberrypi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - enabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - enabled system.adapter.vis-keyboard.0 : vis-keyboard : raspberrypi - enabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : raspberrypi - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : raspberrypi - enabled system.adapter.vis-material.0 : vis-material : raspberrypi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - enabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - enabled system.adapter.vis-players.0 : vis-players : raspberrypi - enabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: x, bind: 1x, run as: admin + system.adapter.deconz.0 : deconz : raspberrypi - enabled, port: x + system.adapter.mqtt.0 : mqtt : raspberrypi - enabled, port: x, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : raspberrypi - enabled, port: x0, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: x, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : raspberrypi - enabled, port: x, bind: 1x + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port:xx, bind: 0.0.0.0, run as: admin + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: x, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: x, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json live-stable : http://iobroker.live/repo/sources-dist.json live-beta : http://iobroker.live/repo/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.24.1 , installed 3.24.1 Adapter "alias-manager": 1.2.4 , installed 1.2.6 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "broadlink2" : 2.1.5 , installed 2.1.5 Adapter "bydbatt" : 1.0.8 , installed 1.0.8 Adapter "bydhvs" : 1.4.0 , installed 1.4.0 Adapter "daswetter" : 3.1.10 , installed 3.1.10 Adapter "deconz" : 1.3.21 , installed 1.3.21 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "discovery" : 3.1.0 , installed 3.2.0 Adapter "echarts" : 1.5.1 , installed 1.5.1 Adapter "email" : 1.2.0 , installed 1.2.0 Adapter "fb-checkpresence": 1.2.2 , installed 1.2.2 Adapter "fritzdect" : 2.3.1 , installed 2.3.1 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "homekit-controller": 0.5.8, installed 0.5.8 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 2.0.11 Adapter "javascript" : 7.0.3 , installed 7.1.1 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "lg-thinq" : 0.1.4 , installed 0.1.4 Adapter "lgtv" : 1.1.10 , installed 1.1.12 Adapter "linux-control": 1.1.3 , installed 1.1.5 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mihome-cloud" : 0.1.0 , installed 0.1.0 Adapter "mihome-vacuum": 3.11.0 , installed 3.11.0 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "node-red" : 4.0.3 , installed 4.0.3 Adapter "openweathermap": 0.3.9 , installed 0.3.11 Adapter "parcel" : 0.0.27 , installed 0.0.32 Adapter "ping" : 1.5.3 , installed 1.6.2 Adapter "plex" : 0.9.1 , installed 0.9.1 Adapter "ring" : 3.2.2 , installed 3.4.0 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "signal-cmb" : 0.3.0 , installed 0.3.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "sma-em" : 0.7.0 , installed 0.7.0 Adapter "socketio" : 4.2.0 , installed 6.4.0 Adapter "sonoff" : 2.5.3 , installed 2.5.7 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "upnp" : 1.0.21 , installed 1.0.21 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.96.0 , installed 0.96.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "weatherunderground": 3.4.2, installed 3.4.2 Adapter "web" : 4.3.0 , installed 6.0.3 Adapter "wled" : 0.6.7 , installed 0.7.0 Adapter "ws" : 1.3.0 , installed 2.4.0 Objects and States Please stand by - This may take a while Objects: 23872 States: 21221 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 13161 577/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 13100 577/iobroker.js-con tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 1991 956/node-red tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 17487 1140/io.sonoff.0 tcp 0 0 0.0.0.0:1889 0.0.0.0:* LISTEN 1001 2033 999/io.mqtt.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13057 611/sshd: /usr/sbin tcp 0 0 192.168.178.70:7777 0.0.0.0:* LISTEN 1001 1874 861/io.admin.0 tcp 0 0 192.168.178.70:1888 0.0.0.0:* LISTEN 1001 17438 1082/io.shelly.1 tcp6 0 0 :::22 :::* LISTEN 0 15076 611/sshd: /usr/sbin tcp6 0 0 :::41891 :::* LISTEN 1001 20136 2047/io.plex.0 tcp6 0 0 :::8084 :::* LISTEN 1001 23124 2144/io.socketio.0 tcp6 0 0 :::8082 :::* LISTEN 1001 16841 1235/io.web.0 udp 0 0 0.0.0.0:40428 0.0.0.0:* 108 1689 426/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15103 786/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 23952 2682/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 1687 426/avahi-daemon: r udp 0 0 0.0.0.0:9522 0.0.0.0:* 1001 23957 2099/io.sma-em.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 15527 1055/io.shelly.0 udp 0 0 0.0.0.0:38718 0.0.0.0:* 1001 25009 2638/io.upnp.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 24311 2638/io.upnp.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 16229 1353/io.deconz.0 udp6 0 0 :::546 :::* 0 15115 786/dhcpcd udp6 0 0 :::33664 :::* 108 1690 426/avahi-daemon: r udp6 0 0 :::5353 :::* 108 1688 426/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 16232 1353/io.deconz.0 udp6 0 0 :::1900 :::* 1001 16231 1353/io.deconz.0 -
Da läuft dir ein Skript aus dem Ruder.
-
@thomas-braun sagte in RPI 4 Update auf ?:
Da läuft dir ein Skript aus dem Ruder.
kann ich erkennen welches das ist....ja ein paar
-
Nein, nur durch testen. Die Skripte alle ausschalten, die Hälfte wieder starten, etwas länger beobachten.
So das ganze eingrenzen. -
@thomas-braun sagte in RPI 4 Update auf ?:
Nein, nur durch testen. Die Skripte alle ausschalten, die Hälfte wieder starten, etwas länger beobachten.
So das ganze eingrenzen.Ok dann mache ich mich an den Punkt.
So langsam kreisen wir den Fehler ein, aber ich lerne auch daraus.melde mich ...sobald ich wieder was dazu schrieben kann.
-
Sodele,
kreuz und quer Skripte abgeschalten und kein erfolg.
soll ich wieder die Ergebnisse posten top,Iob Diag?
-
@bob-der-1 Du bist mit dem Javascript-Adapter auf "BETA". Gehe doch mal testweise auf die stable Version 7.0.3 zurück.
Ro.75
-
@ro75
erledigt,auch nicht besser....
hatte den JS Adapter auch ganz aus....on daher kann es kein einzelnes Skript sein. -
@bob-der-1 dann alle Skripte aus. Wie ist es dann?
Wenn ok, dann ein Skript an, beobachten - wieder aus und wiederholen mit dem nächsten Skript. Bis du durch bist.
Ro75.
-
@bob-der-1 sagte in RPI 4 Update auf ?:
hatte den JS Adapter auch ganz aus....on daher kann es kein einzelnes Skript sein.
Tolle Info.
Mach bitte mal den "fb-checkpresence" und "Alexa2" Adapter auf STOPP.
Wie ist es dann?
-
Also ich habe alle Skripte nacheinander ausgeschalten und auf Aus gelassen.
Aann ausgeschlaten und wieder an das nur eins Aus ist.
Alle Aus aber Adapter an.
Adapter Aus.das war mit dem 7.11er und da war keine Verbesserung, mit dem /.0.3 auch nicht wenn ich ihn aus lasse, reboot bringt da auch keine Verbesserung.
Mittlerweile habe ich nochmal das netzteil getauscht, die Lankabel getauscht , ein andere Gerät ans Lankabel und zu guter letzt nur 4 Adapter angehabt.
Admin,web,Backup und Deconz.......auch nicht viel besser
-
@bob-der-1 wie sehen den die Werte bei top aus, wenn nur diese 4 Adapter an sind?
-
@ro75
Moment................wird sofort gemacht, wenn alle adpater aus sind bis auf die 4 sieht das so 22 s auf meinem PC aus.
An anderen Endgeräten dito.
