Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev)
-
@mickym said:
nochmalnein
sudo apt update
Hättest ausführen müssen. Also ggf. Genau lesen.Hatte ich, nur nicht dokumentiert, sorry.
Ist aber vielleicht auch daran erkennbar, dass apt policy udev die Quelle auflistet.@thomas-braun said:
Und du hast ein 32bit System. Sonderfall, steht aber auch drin.
Das erklärt wohl, warum der erste Anlauf nicht funktionierte, aber doch hoffentlich nicht, warum der zweite zu einem SEGFAULT führt, oder?
-
@thomas-braun said in Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev):
Hast du irgendwie reingeprügelt.
Ich wüsste nicht, wie.
Ich denke, ich habe mich an die hier genannten Vorschläge gehalten! -
Beim zweiten hast du offenbar unpassende Versionen von udev und der libudev1 miteinander vermengt.
Da müsste man die Meldungen von dpkg/apt dazu sehen.
-
@lukas-g sagte in Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev):
Ich denke, ich habe mich an die hier genannten Vorschläge gehalten!
Nö, dann hätte es ja funktioniert.
-
Hallo nochmal, und schon einmal vielen Dank für die Antworten!
@djmarc75 said in Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev):
seit welchem update ?
Das Update, von welchem dieser Thread handelt!? Es steht im Titel des Threads, ich dachte deshalb das wäre eindeutig. Ich hatte einfach apt update und upgrade ausgeführt und mir damit den Fehler herein geholt.
@thomas-braun said in Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev):
Wenn mann wüsste was mit 'herumgeteste' konkret gemeint ist...
Das weiß ich leider auch nicht mehr, Sorry! Ich habe so viel herum probiert. Ich hatte relativ früh (Ich glaube im Mai) dieses Problem und habe verschiedene Dinge die hier beschrieben wurden und aber auch andere Dinge ausprobiert. Ich hatte auch dieses Problem mit den Schlüsseln. Leider kenne ich mich mit mit der Rechte/User-Thematik nicht aus.
Leider sind auch viele Anleitungen die man online findet gerade was das angeht veraltet.@thomas-braun said in Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev):
Ist aber auch eine Frage für einen eigenen Thread.
Ausgaben des LogFiles wären dann dort auch hilfreich.Ich versuch es mal, ich hoffe damit könnt Ihr etwas anfangen.
pi@iobroker-pi:~ $ ls -la /dev/serial/by-id/ insgesamt 0 drwxr-xr-x 2 root root 60 23. Jul 11:17 . drwxr-xr-x 4 root root 80 23. Jul 11:17 .. lrwxrwxrwx 1 root root 13 23. Jul 11:17 usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0 -> ../../ttyUSB0Hier wird der Sonoff Stick gefunden. Ich kopiere die Ausgabe aus Zeile 5 und setze diese in den Einstellungen der Instanz Zigbee.0 unter "COM port name" direkt hinter "/dev/serial/by-id/". Also: "/dev/serial/by-id/usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0"
Ich hoffe, das hier ist der richtige Log!?
zigbee.0 2023-07-23 11:24:25.015 debug DeviceAvailability:Publish LQ for 0x04cd15fffedb2b9e = 0 zigbee.0 2023-07-23 11:24:25.008 debug DeviceAvailability:Publish available for 0x04cd15fffedb2b9e = false zigbee.0 2023-07-23 11:24:25.000 warn DeviceAvailability:Failed to ping 0x04cd15fffedb2b9e TS0505B zigbee.0 2023-07-23 11:24:23.796 debug DeviceAvailability:Exception in readState of '0x04cd15fffedb2b9e' - error : 'Error: Read 0x04cd15fffedb2b9e/1 genOnOff(["onOff"], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Data request failed with error: 'No network route' (205))' zigbee.0 2023-07-23 11:24:02.911 debug DeviceAvailability:Publish LQ for 0x04cd15fffedb2b9e = 10 zigbee.0 2023-07-23 11:24:02.903 debug DeviceAvailability:Publish available for 0x04cd15fffedb2b9e = true zigbee.0 2023-07-23 11:24:02.047 info debug devices set to [] zigbee.0 2023-07-23 11:24:02.030 debug DeviceAvailability:register device Ping for "0x04cd15fffedb2b9e" zigbee.0 2023-07-23 11:24:02.028 debug getGroups result: {} zigbee.0 2023-07-23 11:24:01.909 info Zigbee started zigbee.0 2023-07-23 11:24:01.908 info 0x04cd15fffedb2b9e (addr 61306): 14156506L - Lidl Livarno Lux smart LED mood light (Router) zigbee.0 2023-07-23 11:24:01.905 debug New device event: {"type":"device","device":{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":2,"_type":"Router","_ieeeAddr":"0x04cd15fffedb2b9e","_networkAddress":61306,"_manufacturerID":4098,"_endpoints":[{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":1,"profileID":260,"deviceID":269,"inputClusters":[0,3,4,5,6,4096,8,768,61184],"outputClusters":[25,10],"deviceNetworkAddress":61306,"deviceIeeeAddress":"0x04cd15fffedb2b9e","clusters":{"genBasic":{"attributes":{"modelId":"TS0505B","manufacturerName":"_TZ3210_r0xgkft5","powerSource":1,"zclVersion":3,"appVersion":90,"stackVersion":0,"hwVersion":1,"dateCode":""}},"lightingColorCtrl":{"attributes":{"colorCapabilities":29}},"genOnOff":{"attributes":{"onOff":1}}},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":{},"sendInProgress":false},{"_events":{},"_eventsCount":0,"_maxListeners":100,"ID":242,"profileID":41440,"deviceID":97,"inputClusters":[],"outputClusters":[33],"deviceNetworkAddress":61306,"deviceIeeeAddress":"0x04cd15fffedb2b9e","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{},"pendingRequests":{},"sendInProgress":false}],"_manufacturerName":"_TZ3210_r0xgkft5","_powerSource":"Mains (single phase)","_modelID":"TS0505B","_applicationVersion":90,"_stackVersion":0,"_zclVersion":3,"_hardwareVersion":1,"_dateCode":"","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"_skipTimeResponse":false,"meta":{"configured":1842547789},"_lastSeen":1689967873313,"_defaultSendRequestWhen":"immediate","_pendingRequestTimeout":0},"mapped":{"exposes":[{"type":"light","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","value_toggle":"TOGGLE","description":"On/off state of this light"},{"type":"numeric","name":"brightness","property":"brightness","access":7,"value_min":0,"value_max":254,"description":"Brightness of this light"},{"type":"numeric","name":"color_temp","property":"color_temp","access":7,"unit":"mired","value_min":153,"value_max":500,"description":"Color temperature of this light","presets":[{"name":"coolest","value":153,"description":"Coolest temperature supported"},{"name":"cool","value":250,"description":"Cool temperature (250 mireds / 4000 Kelvin)"},{"name":"neutral","value":370,"description":"Neutral temperature (370 mireds / 2700 Kelvin)"},{"name":"warm","value":454,"description":"Warm temperature (454 mireds / 2200 Kelvin)"},{"name":"warmest","value":500,"description":"Warmest temperature supported"}]},{"type":"composite","property":"color","name":"color_xy","features":[{"type":"numeric","name":"x","property":"x","access":7},{"type":"numeric","name":"y","property":"y","access":7}],"access":7,"description":"Color of this light in the CIE 1931 color space (x/y)"}]},{"type":"enum","name":"effect","property":"effect","access":2,"values":["blink","breathe","okay","channel_change","finish_effect","stop_effect"],"description":"Triggers an effect on the light (e.g. make light blink for a few seconds)"},{"type":"binary","name":"do_not_disturb","property":"do_not_disturb","access":3,"value_on":true,"value_off":false,"description":"Do not disturb mode, when enabled this function will keep the light OFF after a power outage"},{"type":"enum","name":"color_power_on_behavior","property":"color_power_on_behavior","access":3,"values":["initial","previous","cutomized"],"description":"Power on behavior state"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"lightingColorCtrl","type":["attributeReport","readResponse"],"options":[{"type":"binary","name":"color_sync","property":"color_sync","access":2,"value_on":true,"value_off":false,"description":"When enabled colors will be synced, e.g. if the light supports both color x/y and color temperature a conversion from color x/y to color temperature will be done when setting the x/y color (default true)."}]},{"cluster":"genOnOff","type":["attributeReport","readResponse"],"options":[{"type":"binary","name":"state_action","property":"state_action","access":2,"value_on":true,"value_off":false,"description":"State actions will also be published as 'action' when true (default false)."}]},{"cluster":"genLevelCtrl","type":["attributeReport","readResponse"]},{"cluster":"genLevelCtrl","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state","brightness","brightness_percent","on_time"],"options":[{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to `0` (no transition)."}]},{"key":["color","color_temp","color_temp_percent"],"options":[{"type":"binary","name":"color_sync","property":"color_sync","access":2,"value_on":true,"value_off":false,"description":"When enabled colors will be synced, e.g. if the light supports both color x/y and color temperature a conversion from color x/y to color temperature will be done when setting the x/y color (default true)."},{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to `0` (no transition)."}]},{"key":["transition"],"attr":[]},{"key":["rate"],"attr":[]},{"key":["brightness_move","brightness_move_onoff"]},{"key":["colortemp_move","color_temp_move"]},{"key":["brightness_step","brightness_step_onoff"],"options":[{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to `0` (no transition)."}]},{"key":["color_temp_step"],"options":[{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to `0` (no transition)."}]},{"key":["hue_move","saturation_move"]},{"key":["hue_step","saturation_step"],"options":[{"type":"numeric","name":"transition","property":"transition","access":2,"value_min":0,"description":"Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to `0` (no transition)."}]},{"key":["level_config"]},{"key":["color_options"]},{"key":["color_mode"]},{"key":["effect","alert","flash"]},{"key":["do_not_disturb"]},{"key":["color_power_on_behavior"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]},{"key":["read"]},{"key":["write"]},{"key":["command"]},{"key":["reset"]}],"meta":{"applyRedFix":true,"supportsEnhancedHue":false},"zigbeeModel":["TS0505B"],"model":"14156506L","vendor":"Lidl","description":"Livarno Lux smart LED mood light","whiteLabel":[{"vendor":"Mercator Ikuü","model":"SMD4106W-RGB-ZB"},{"vendor":"TuYa","model":"A5C-21F7-01"},{"vendor":"Mercator Ikuü","model":"S9E27LED9W-RGB-Z"},{"vendor":"Aldi","model":"L122CB63H11A9.0W","description":"LIGHTWAY smart home LED-lamp - bulb"},{"vendor":"Lidl","model":"14153706L","description":"Livarno smart LED ceiling light"},{"vendor":"Zemismart","model":"LXZB-ZB-09A","description":"Zemismart LED Surface Mounted Downlight 9W RGBW"},{"vendor":"Feconn","model":"FE-GU10-5W","description":"Zigbee GU10 5W smart bulb"},{"vendor":"Nedis","model":"ZBLC1E14"},{"vendor":"Aldi","model":"L122FF63H11A5.0W","description":"LIGHTWAY smart home LED-lamp - spot","fingerprint":[{"manufacturerName":"_TZ3000_j0gtlepx"}]},{"vendor":"Aldi","model":"L122AA63H11A6.5W","description":"LIGHTWAY smart home LED-lamp - candle","fingerprint":[{"manufacturerName":"_TZ3000_iivsrikg"}]},{"vendor":"Aldi","model":"C422AC11D41H140.0W","description":"MEGOS LED panel RGB+CCT 40W 3600lm 62 x 62 cm","fingerprint":[{"manufacturerName":"_TZ3000_v1srfw9x"}]},{"vendor":"Aldi","model":"C422AC14D41H140.0W","description":"MEGOS LED panel RGB+CCT 40W 3600lm 30 x 120 cm","fingerprint":[{"manufacturerName":"_TZ3000_gb5gaeca"}]},{"vendor":"MiBoxer","model":"FUT066Z","description":"RGB+CCT LED Downlight","fingerprint":[{"manufacturerName":"_TZ3210_zrvxvydd"}]},{"vendor":"Miboxer","model":"FUT039Z","description":"RGB+CCT LED controller","fingerprint":[{"manufacturerName":"_TZ3210_jicmoite"}]},{"vendor":"Lidl","model":"14156506L","description":"Livarno Lux smart LED mood light","fingerprint":[{"manufacturerName":"_TZ3210_r0xgkft5"}]},{"vendor":"Lidl","model":"HG08010","description":"Livarno Home outdoor spotlight","fingerprint":[{"manufacturerName":"_TZ3210_umi6vbsz"}]},{"vendor":"Lidl","model":"HG08008","description":"Livarno Home LED ceiling light","fingerprint":[{"manufacturerName":"_TZ3210_p9ao60da"}]},{"vendor":"TuYa","model":"HG08007","description":"Livarno Home outdoor LED band","fingerprint":[{"manufacturerName":"_TZ3210_zbabx9wh"}]},{"vendor":"Lidl","model":"14158704L","description":"Livarno Home LED floor lamp, RGBW","fingerprint":[{"manufacturerName":"_TZ3210_z1vlyufu"}]},{"vendor":"Lidl","model":"14158804L","description":"Livarno Home LED desk lamp RGBW","fingerprint":[{"manufacturerName":"_TZ3210_hxtfthp5"}]},{"vendor":"Lidl","model":"HG07834A","description":"Livarno Lux GU10 spot RGB","fingerprint":[{"manufacturerName":"_TZ3000_quqaeew6"}]},{"vendor":"Lidl","model":"HG07834B","description":"Livarno Lux E14 candle RGB","fingerprint":[{"manufacturerName":"_TZ3000_th6zqqy6"},{"manufacturerName":"_TZ3000_wr6g6olr"}]},{"vendor":"Lidl","model":"HG08131C","description":"Livarno Home outdoor E27 bulb in set with flare","fingerprint":[{"manufacturerName":"_TZ3000_q50zhdsc"}]},{"vendor":"Lidl","model":"HG07834C","description":"Livarno Lux E27 bulb RGB","fingerprint":[{"manufacturerName":"_TZ3000_qd7hej8u"}]},{"vendor":"Lidl","model":"HG08383B","description":"Livarno outdoor LED light chain","fingerprint":[{"manufacturerName":"_TZ3000_bwlvyjwk"}]},{"vendor":"Lidl","model":"HG08383A","description":"Livarno outdoor LED light chain","fingerprint":[{"manufacturerName":"_TZ3000_taspddvq"}]},{"vendor":"Garza Smart","model":"Garza-Standard-A60","description":"Standard A60 bulb","fingerprint":[{"manufacturerName":"_TZ3210_sln7ah6r"}]},{"vendor":"UR Lighting","model":"TH008L10RGBCCT","description":"10W RGB+CCT downlight","fingerprint":[{"manufacturerName":"_TZ3210_dn5higyl"}]},{"vendor":"Lidl","model":"HG08010","description":"Livarno Home outdoor spotlight","fingerprint":[{"manufacturerName":"_TZ3210_umi6vbsz"}]},{"vendor":"Lidl","model":"HG08008","description":"Livarno Home LED ceiling light","fingerprint":[{"manufacturerName":"_TZ3210_p9ao60da"}]},{"vendor":"Lidl","model":"HG08007","description":"Livarno Home outdoor LED band","fingerprint":[{"manufacturerName":"_TZ3210_zbabx9wh"}]},{"vendor":"Lidl","model":"399629_2110","description":"Livarno Lux Ceiling Panel RGB+CCT","fingerprint":[{"manufacturerName":"_TZ3210_c0s1xloa"}]},{"vendor":"Skydance","model":"WZ5_dim_2","description":"Zigbee & RF 5 in 1 LED controller (DIM mode)","fingerprint":[{"manufacturerName":"_TZB210_3zfp8mki"}]},{"vendor":"TuYa","model":"TS0505B_1_1","description":"Zigbee 3.0 18W led light bulb E27 RGBCW","fingerprint":[{"manufacturerName":"_TZ3210_jd3z4yig"}]},{"vendor":"TuYa","model":"TS0505B_1_2","description":"Zigbee E14 dimmable smart bulb RGB+CW+WW","fingerprint":[{"manufacturerName":"_TZ3210_it1u8ahz"}]},{"vendor":"TuYa","model":"TS0505B_1_3","description":"Zigbee 10W Downlight RGB CCW","fingerprint":[{"manufacturerName":"_TZ3210_it1u8ahz"}]}],"options":["[Circular]","[Circular]","[Circular]"]},"name":"0x04cd15fffedb2b9e"} zigbee.0 2023-07-23 11:24:01.900 debug DeviceConfigure:DeviceConfigure 0x04cd15fffedb2b9e TS0505B not needed zigbee.0 2023-07-23 11:24:01.897 info Currently 1 devices are joined: zigbee.0 2023-07-23 11:24:01.886 info --> transmitPower : normal zigbee.0 2023-07-23 11:24:01.875 info Unable to disable LED, unsupported function. zigbee.0 2023-07-23 11:24:01.872 debug Zigbee network parameters: panID=6754 channel=25 extendedPanID=4da8f910b3cc47a7 zigbee.0 2023-07-23 11:24:01.864 info Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20210708}} zigbee.0 2023-07-23 11:24:01.852 debug zigbee-herdsman startedIch habe jetzt einfach den Text aus dem Browser heraus aus der Seite "Protokolle" kopiert.
Ich hoffe, ich habe das richtig verstanden.
Vielen Dank schon mal und beste Grüße!Jonas
-
Ja geht mir genau so
Ich habe extra wegen Problemen mit dem Netatmo Adapter, iobroker neu auf den Pi aufgesetzt. Erster Adapter Zigbee läuft schon mal nicht, auch mit der udev/stable 247.3-7+deb11u2 Änderung auf udev/stable 247.3-7+deb11u1 selbe Ergebnis. Stunden verblödelt ohne Ergebnis. Bitte Nachricht wenn es wieder funktioniert. -
Dann wird der Stick ja eingebunden. Dürfte jetzt eine Einstellungssache sein.
-
@andy005 sagte in Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev):
Bitte Nachricht wenn es wieder funktioniert.
Funktioniert, wenn man es richtig umstellt.
Oder man wartet auf ein Update beim nächsten PointRelease.247.3-7+deb11u4 aus den proposed-updates funktioniert jedenfalls.
-
Erstmal danke, dass Ihr Euch des Themas angenommen habt.
Bei mir (4B, 64Bit) führt das Durchlaufen der Anweisungen leider nicht zum gewünschten Ende.
Ich erhalte die Meldung, dass udev schon im aktuellen Stand ist.rolf@home:~ $ uname -m aarch64 rolf@home:~ $ cat /etc/apt/sources.list.d/bullseye-proposed-updates.list # bullseye-proposed-updates deb http://deb.debian.org/debian bullseye-proposed-updates main rolf@home:~ $ sudo apt update OK:1 http://deb.debian.org/debian bullseye-proposed-updates InRelease OK:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease OK:3 http://phoscon.de/apt/deconz bullseye InRelease OK:4 http://archive.raspberrypi.org/debian bullseye InRelease OK:5 https://deb.nodesource.com/node_18.x bullseye InRelease OK:6 https://repos.influxdata.com/debian stable InRelease OK:7 https://repos.influxdata.com/debian bullseye InRelease Holen:8 https://dl.cloudsmith.io/public/evcc/stable/deb/raspbian bullseye InRelease [5.127 B] Es wurden 5.127 B in 3 s geholt (1.757 B/s). Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Alle Pakete sind aktuell. rolf@home:~ $ sudo apt -t bullseye-proposed-updates install udev Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig udev ist schon die neueste Version (247.3-7+rpi1+deb11u2). 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 25 nicht aktualisiert.Kann mir jemand einen Hinweis geben, was ich falsch mache/gemacht habe.
Danke -
apt policy udevsagt? Vermutlich trifft bei dir der Fall unter
EDIT 10.06.2023
zu. Kein reines 64bit-System, sondern lediglich der Kernel, userland wird 32bit sein. -
@thomas-braun
Hier die Ausgabe ...rolf@home:~ $ apt policy udev udev: Installiert: 247.3-7+rpi1+deb11u2 Installationskandidat: 247.3-7+rpi1+deb11u2 Versionstabelle: *** 247.3-7+rpi1+deb11u2 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 100 /var/lib/dpkg/status 247.3-7+deb11u4 500 500 http://deb.debian.org/debian bullseye-proposed-updates/main armhf Packages -
Joh, ist genau die Situation die ich im vorherigen Posting vermutete.
-
@thomas-braun
Danke, hab die Anleitung durchgeführt und die udev-Version sieht jetzt wie gewünscht aus:rolf@home:~ $ apt policy udev udev: Installiert: 247.3-7+deb11u4 Installationskandidat: 247.3-7+rpi1+deb11u2 Versionstabelle: 247.3-7+rpi1+deb11u2 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages *** 247.3-7+deb11u4 500 500 http://deb.debian.org/debian bullseye-proposed-updates/main armhf Packages 100 /var/lib/dpkg/statusUpdate ist auf hold gesetzt. Was Deine Aussage zum userland bedeutet muss ich mir dann wohl mal ansehen.
-
Das bedeutet, dass bei dir NUR der Kernel 64bittig ist, der ganze Rest (das sog. 'userland') ist weiterhin auf 32bit.
-
@all
Ich glaube die gefixte Version ist jetzt auch über die offiziellen Update-Repos verfügbar.
Bitte mal persudo apt update apt policy udev libudev1schauen was da wo hängt. Insbesondere die 32bit-RaspberryOS-Fahrer.
-
hi, habe ein komplett 64bit Raspi - System. Habe udev aber noch auf hold.
pi@iobmaster:~ $ apt policy udev libudev1 udev: Installiert: 247.3-7+deb11u1 Installationskandidat: 247.3-7+deb11u4 Versionstabelle: 247.3-7+deb11u4 500 500 http://deb.debian.org/debian bullseye-updates/main arm64 Packages 247.3-7+deb11u2 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages *** 247.3-7+deb11u1 100 100 /var/lib/dpkg/status libudev1: Installiert: 247.3-7+deb11u1 Installationskandidat: 247.3-7+deb11u4 Versionstabelle: 247.3-7+deb11u4 500 500 http://deb.debian.org/debian bullseye-updates/main arm64 Packages 247.3-7+deb11u2 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages *** 247.3-7+deb11u1 100 100 /var/lib/dpkg/status pi@iobmaster:~ $ -
@tt-tom sagte in Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev):
Habe udev aber noch auf hold.
Kannste rausnehmen, der Installationskandidat 247.3-7+deb11u4 dürfte funktionieren.
-
okay werde ich machen und berichten.
-
funktioniert nichtman sollte schon den Adapter wieder rein stecken
pi@iobtest:~ $ apt policy udev udev: Installiert: 247.3-7+deb11u4 Installationskandidat: 247.3-7+deb11u4 Versionstabelle: *** 247.3-7+deb11u4 500 500 http://deb.debian.org/debian bullseye-updates/main arm64 Packages 100 /var/lib/dpkg/status 247.3-7+deb11u2 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages pi@iobtest:~ $ sudo reboot pi@iobtest:~ $ ls -l /dev/serial/by-id/ insgesamt 0 lrwxrwxrwx 1 root root 13 9. Aug 18:04 usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0 -> ../../ttyUSB0 pi@iobtest:~ $ -
@thomas-braun said in Zigbee/Conbee2 funktioniert nach Update nicht mehr (udev):
sudo apt update apt policy udev libudev1schauen was da wo hängt. Insbesondere die 32bit-RaspberryOS-Fahrer.
Das kommt bei mir (32Bit):
pi@iobroker2:~ $ apt policy udev libudev1 udev: Installed: 247.3-7+deb11u3 Candidate: 247.3-7+rpi1+deb11u2 Version table: 247.3-7+rpi1+deb11u2 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 247.3-7+deb11u4 500 500 http://deb.debian.org/debian bullseye-proposed-updates/main armhf Packages *** 247.3-7+deb11u3 100 100 /var/lib/dpkg/status libudev1: Installed: 247.3-7+deb11u3 Candidate: 247.3-7+rpi1+deb11u2 Version table: 247.3-7+rpi1+deb11u2 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages 247.3-7+deb11u4 500 500 http://deb.debian.org/debian bullseye-proposed-updates/main armhf Packages *** 247.3-7+deb11u3 100 100 /var/lib/dpkg/statusDas heisst ich muss das Paket on hold lassen, oder?
