Iobroker Absturz

Vandura

pi@raspberrypi:/var $ tail -n 100 /var/log/kern.log
Mar 27 11:28:16 raspberrypi kernel: [    3.253047]     HOME=/
Mar 27 11:28:16 raspberrypi kernel: [    3.253061]     TERM=linux
Mar 27 11:28:16 raspberrypi kernel: [    3.376336] usb 1-1.4: USB disconnect, device number 3
Mar 27 11:28:16 raspberrypi kernel: [    3.674376] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
Mar 27 11:28:16 raspberrypi kernel: [    3.812994] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
Mar 27 11:28:16 raspberrypi kernel: [    3.813042] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 27 11:28:16 raspberrypi kernel: [    3.813078] usb 1-1.4: Product: ConBee II
Mar 27 11:28:16 raspberrypi kernel: [    3.813108] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH
Mar 27 11:28:16 raspberrypi kernel: [    3.813140] usb 1-1.4: SerialNumber: DE2218695
Mar 27 11:28:16 raspberrypi kernel: [    4.676546] NET: Registered protocol family 10
Mar 27 11:28:16 raspberrypi kernel: [    4.677949] Segment Routing with IPv6
Mar 27 11:28:16 raspberrypi kernel: [    6.562991] random: systemd: uninitialized urandom read (16 bytes read)
Mar 27 11:28:16 raspberrypi kernel: [    6.590967] random: systemd: uninitialized urandom read (16 bytes read)
Mar 27 11:28:16 raspberrypi kernel: [    6.592359] random: systemd: uninitialized urandom read (16 bytes read)
Mar 27 11:28:16 raspberrypi kernel: [    7.216983] usb 1-1.4: USB disconnect, device number 4
Mar 27 11:28:16 raspberrypi kernel: [    7.524380] usb 1-1.4: new full-speed USB device number 5 using xhci_hcd
Mar 27 11:28:16 raspberrypi kernel: [    7.663063] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
Mar 27 11:28:16 raspberrypi kernel: [    7.663087] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 27 11:28:16 raspberrypi kernel: [    7.663105] usb 1-1.4: Product: ConBee II
Mar 27 11:28:16 raspberrypi kernel: [    7.663122] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH
Mar 27 11:28:16 raspberrypi kernel: [    7.663139] usb 1-1.4: SerialNumber: DE2218695
Mar 27 11:28:16 raspberrypi kernel: [    8.694377] EXT4-fs (sda2): re-mounted. Opts: (null)
Mar 27 11:28:16 raspberrypi kernel: [   10.113741] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Mar 27 11:28:16 raspberrypi kernel: [   10.116142] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Mar 27 11:28:16 raspberrypi kernel: [   10.116775] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Mar 27 11:28:16 raspberrypi kernel: [   10.117383] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Mar 27 11:28:16 raspberrypi kernel: [   10.258105] mc: Linux media interface: v0.10
Mar 27 11:28:16 raspberrypi kernel: [   10.273992] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   10.358164] videodev: Linux video capture interface: v2.00
Mar 27 11:28:16 raspberrypi kernel: [   10.435146] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   10.437435] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Mar 27 11:28:16 raspberrypi kernel: [   10.437459] [vc_sm_connected_init]: start
Mar 27 11:28:16 raspberrypi kernel: [   10.438512] [vc_sm_connected_init]: installed successfully
Mar 27 11:28:16 raspberrypi kernel: [   10.438883] bcm2835_audio bcm2835_audio: card created with 8 channels
Mar 27 11:28:16 raspberrypi kernel: [   10.609786] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
Mar 27 11:28:16 raspberrypi kernel: [   10.611221] usbcore: registered new interface driver cdc_acm
Mar 27 11:28:16 raspberrypi kernel: [   10.611239] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Mar 27 11:28:16 raspberrypi kernel: [   10.741564] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   10.741600] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   10.755577] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
Mar 27 11:28:16 raspberrypi kernel: [   10.962973] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   11.055770] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   11.068646] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Mar 27 11:28:16 raspberrypi kernel: [   11.071775] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   11.071782] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Mar 27 11:28:16 raspberrypi kernel: [   11.072744] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Mar 27 11:28:16 raspberrypi kernel: [   11.073083] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Mar 27 11:28:16 raspberrypi kernel: [   11.073112] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Mar 27 11:28:16 raspberrypi kernel: [   11.073137] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Mar 27 11:28:16 raspberrypi kernel: [   11.073160] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Mar 27 11:28:16 raspberrypi kernel: [   11.073183] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Mar 27 11:28:16 raspberrypi kernel: [   11.073425] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Mar 27 11:28:16 raspberrypi kernel: [   11.083601] [drm] No displays found. Consider forcing hotplug if HDMI is attached
Mar 27 11:28:16 raspberrypi kernel: [   11.083726] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
Mar 27 11:28:16 raspberrypi kernel: [   11.095958] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
Mar 27 11:28:16 raspberrypi kernel: [   11.096494] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Mar 27 11:28:16 raspberrypi kernel: [   11.096538] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Mar 27 11:28:16 raspberrypi kernel: [   11.098385] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Mar 27 11:28:16 raspberrypi kernel: [   11.103345] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Mar 27 11:28:16 raspberrypi kernel: [   11.103390] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Mar 27 11:28:16 raspberrypi kernel: [   11.108197] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Mar 27 11:28:16 raspberrypi kernel: [   11.108259] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Mar 27 11:28:16 raspberrypi kernel: [   11.126548] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
Mar 27 11:28:16 raspberrypi kernel: [   11.126596] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
Mar 27 11:28:16 raspberrypi kernel: [   11.157030] random: crng init done
Mar 27 11:28:16 raspberrypi kernel: [   11.157058] random: 7 urandom warning(s) missed due to ratelimiting
Mar 27 11:28:16 raspberrypi kernel: [   11.168321] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Mar 27 11:28:16 raspberrypi kernel: [   11.314650] sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar 27 11:28:16 raspberrypi kernel: [   11.410389] brcmfmac: F1 signature read @0x18000000=0x15264345
Mar 27 11:28:16 raspberrypi kernel: [   11.418858] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Mar 27 11:28:16 raspberrypi kernel: [   11.419550] usbcore: registered new interface driver brcmfmac
Mar 27 11:28:16 raspberrypi kernel: [   12.993487] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Mar 27 11:28:16 raspberrypi kernel: [   12.993606] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Mar 27 11:28:16 raspberrypi kernel: [   13.043682] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
Mar 27 11:28:16 raspberrypi kernel: [   16.685590] uart-pl011 fe201000.serial: no DMA platform data
Mar 27 11:28:17 raspberrypi kernel: [   17.934114] 8021q: 802.1Q VLAN Support v1.8
Mar 27 11:28:20 raspberrypi kernel: [   21.187493] exfat: Deprecated parameter 'utf8'
Mar 27 11:28:20 raspberrypi kernel: [   21.187540] /dev/sda1: Can't open blockdev
Mar 27 11:28:24 raspberrypi kernel: [   25.312183] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Mar 27 11:28:25 raspberrypi kernel: [   25.665358] Bluetooth: Core ver 2.22
Mar 27 11:28:25 raspberrypi kernel: [   25.665455] NET: Registered protocol family 31
Mar 27 11:28:25 raspberrypi kernel: [   25.665470] Bluetooth: HCI device and connection manager initialized
Mar 27 11:28:25 raspberrypi kernel: [   25.665974] Bluetooth: HCI socket layer initialized
Mar 27 11:28:25 raspberrypi kernel: [   25.665995] Bluetooth: L2CAP socket layer initialized
Mar 27 11:28:25 raspberrypi kernel: [   25.666027] Bluetooth: SCO socket layer initialized
Mar 27 11:28:25 raspberrypi kernel: [   25.792451] Bluetooth: HCI UART driver ver 2.3
Mar 27 11:28:25 raspberrypi kernel: [   25.792469] Bluetooth: HCI UART protocol H4 registered
Mar 27 11:28:25 raspberrypi kernel: [   25.792546] Bluetooth: HCI UART protocol Three-wire (H5) registered
Mar 27 11:28:25 raspberrypi kernel: [   25.792788] Bluetooth: HCI UART protocol Broadcom registered
Mar 27 11:28:25 raspberrypi kernel: [   26.024737] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Mar 27 11:28:25 raspberrypi kernel: [   26.025106] bcmgenet fd580000.ethernet eth0: Link is Down
Mar 27 11:28:26 raspberrypi kernel: [   26.844353] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k FS
Mar 27 11:28:27 raspberrypi kernel: [   27.465190] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar 27 11:28:27 raspberrypi kernel: [   27.465206] Bluetooth: BNEP filters: protocol multicast
Mar 27 11:28:27 raspberrypi kernel: [   27.465230] Bluetooth: BNEP socket layer initialized
Mar 27 11:28:28 raspberrypi kernel: [   29.124495] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Mar 27 11:28:28 raspberrypi kernel: [   29.124525] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mar 27 11:28:30 raspberrypi kernel: [   31.036764] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead
Mar 27 11:28:30 raspberrypi kernel: [   31.159329] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 27 11:28:31 raspberrypi kernel: [   31.834348] vcc-sd: disabling
pi@raspberrypi:/var $

Thomas Braun

@vandura sagte in Iobroker Absturz:

Um 11:28 gab es offenbar einen Reboot.

Vandura

@thomas-braun sagte in Iobroker Absturz:

@vandura sagte in Iobroker Absturz:

Und ein vncserver-x11.log darf da auch nicht existieren, ganz einfach weil man kein X11 und auch kein VNC auf einem Server laufen lässt.

Weiß noch nicht mal was das ist......

Thomas Braun

@vandura

Ich würde mir mein Backup vom iobroker schnappen und die Kiste neu und gescheit (d. h. OHNE Desktop und VNC und so 'nem Kram) aufsetzen.

Vandura

@thomas-braun sagte in Iobroker Absturz:

@vandura sagte in Iobroker Absturz:

Um 11:28 gab es offenbar einen Reboot.

das war ich selbst

Vandura

@vandura

-rw-r----- 1 root adm  206G Mar 27 11:28 kern.log
-rw-r----- 1 root adm  4.2G Mar  8 17:47 kern.log.3.gz
-rw-r----- 1 root adm  3.4G Mar  7 09:53 kern.log.4.gz
-rw-r----- 1 root adm   47G Mar 27 14:39 syslog
-rw-r----- 1 root adm  160G Mar 27 00:00 syslog.1

kann man die Teile löschen?

Thomas Braun

@vandura

sudo > /var/log/syslog.1
sudo > /var/log/kern.log.3.gz
sudo > /var/log/kern.log.4.gz

Nutzt dir aber nix, wenn du die Ursache nicht anpackst, das aktuelle log wird dir dann wieder um die Ohren fliegen.

Vandura

@thomas-braun sagte in Iobroker Absturz:

@vandura
sudo > /var/log/syslog.1
sudo > /var/log/kern.log.3.gz
sudo > /var/log/kern.log.4.gz
Nutzt dir aber nix, wenn du die Ursache nicht anpackst, das aktuelle log wird dir dann wieder um die Ohren fliegen.

Ich tippe mal liegt am mihome-vacuum......der kackt immer ab

Thomas Braun

@vandura sagte in Iobroker Absturz:

Ich tippe

Schau ins Log, tippen nutzt dir nix.

Vandura

@vandura sagte in Iobroker Absturz:

@thomas-braun sagte in Iobroker Absturz:
@vandura
sudo > /var/log/syslog.1
sudo > /var/log/kern.log.3.gz
sudo > /var/log/kern.log.4.gz
Nutzt dir aber nix, wenn du die Ursache nicht anpackst, das aktuelle log wird dir dann wieder um die Ohren fliegen.

kommt nur Permission denied.....?

Thomas Braun

@vandura sagte in Iobroker Absturz:

kommt nur Permission denied.....?

Möglich.
Man kann auch files mit Attributen versehen, das selbst der root die nicht (ohne weiteres) löschen kann. Ich weiß aber nicht ob das bei den logs gemacht wird.

Versuch mal

sudo su
echo "" > /var/log/syslog.1
echo "" > /var/log/kern.log.3.gz
echo "" > /var/log/kern.log.4.gz
exit

Vandura

@vandura sagte in Iobroker Absturz:

@vandura sagte in Iobroker Absturz:
@thomas-braun sagte in Iobroker Absturz:
@vandura
sudo > /var/log/syslog.1
sudo > /var/log/kern.log.3.gz
sudo > /var/log/kern.log.4.gz
Nutzt dir aber nix, wenn du die Ursache nicht anpackst, das aktuelle log wird dir dann wieder um die Ohren fliegen.

Hat geklappt jetzt....ich beobachte es mal weiter, mihome-vacuum habe ich erst mal gelöscht....Danke für die Hilfe

Thomas Braun

@vandura sagte in Iobroker Absturz:

ich beobachte es mal weiter

Installier da ein noch lebendes Betriebssytem!
Dein 'buster' ist tot.

Vandura

@thomas-braun
wie mache ich das ohne das alles weg ist......die Ahnung hab ich nicht....leider

Thomas Braun

@vandura

Hier hat das mal jemand festgehalten:

https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye

Vandura

@thomas-braun ok, schau ich mir an....Danke

Vandura

@thomas-braun sagte in Iobroker Absturz:

@vandura

Hier hat das mal jemand festgehalten:

https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye

======================= SUMMARY =======================
                     v.2023-01-02


Operatingsystem:        Raspbian GNU/Linux 11 (bullseye)
Installation:           Native
Timezone:               Europe/Berlin
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     0

Nodejs-Installation:    /usr/bin/nodejs         v16.19.1
                        /usr/bin/node           v16.19.1
                        /usr/bin/npm            8.19.3
                        /usr/bin/npx            8.19.3

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

Pending iob updates:    0

Active repo(s): Stable (default)

Objects:                8860
States:                 7736

Size of iob-Database:

17M     /opt/iobroker/iobroker-data/objects.json.migrated
17M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
15M     /opt/iobroker/iobroker-data/objects.jsonl
16K     /opt/iobroker/iobroker-data/objects.json.old
66M     /opt/iobroker/iobroker-data/states.jsonl
11M     /opt/iobroker/iobroker-data/states.json.migrated
11M     /opt/iobroker/iobroker-data/states.json.bak.migrated
7.3M    /opt/iobroker/iobroker-data/states.json.old


=================== END OF SUMMARY ====================

Thomas Braun

@vandura

Stell das Boot Target auf Multiuser und bring nodejs auf die derzeitig empfohlene Version 18.

Vandura

@thomas-braun sagte in Iobroker Absturz:

@vandura

Stell das Boot Target auf Multiuser und bring nodejs auf die derzeitig empfohlene Version 18.

wie stelle ich das Boot Target um?

Thomas Braun

@vandura

sudo systemctl set-default multi-user.target

Alternativ kann man beim Raspberry auch über

sudo raspi-config

einstellen.

Community Forum

NEWS

Iobroker Absturz

Support us

409

32.8k

82.9k

1.3m