<![CDATA[Iobroker Absturz]]>Heute Nacht ist mein Iobroker abgerannzt.......angeblich zu wenig Festplatten-Speicherplatz.....nun frage ich mich wie kommt das? Ich habe eine 500 GB Platte am Raspi auf dem Iobroker läuft....
Plattform
linux
Betriebssystem
linux
Architektur
arm
CPUs
4
Geschwindigkeit
1500 MHz
Modell
ARMv7 Processor rev 3 (v7l)
RAM
7.66 GB
System-Betriebszeit
02:27:23
Node.js
v16.19.1 (Empfohlene Version v18.15.0)
time
1679918123187
timeOffset
-120
Anzahl der Adapter
470
NPM
8.19.3
Datenträgergröße
457.2 GB
freier Festplattenspeicher
29.84 GB
Betriebszeit
01:24:02
Aktive Instanzen
28
Weg
/opt/iobroker/

was macht hier den Speicher so voll?

]]>https://forum.iobroker.net/topic/64190/iobroker-absturzRSS for NodeSun, 10 May 2026 13:35:46 GMTMon, 27 Mar 2023 11:59:17 GMT60<![CDATA[Reply to Iobroker Absturz on Tue, 28 Mar 2023 08:20:11 GMT]]>@thomas-braun sagte in Iobroker Absturz:

@vandura

sudo systemctl set-default multi-user.target

Alternativ kann man beim Raspberry auch über

sudo raspi-config

einstellen.

Alles erledigt incl. Upgrade Node.js v18.15.0.
Danke nochmal für deine Hilfe.....👍

]]>https://forum.iobroker.net/post/969464https://forum.iobroker.net/post/969464Tue, 28 Mar 2023 08:20:11 GMT<![CDATA[Reply to Iobroker Absturz on Tue, 28 Mar 2023 05:34:30 GMT]]>@vandura

sudo systemctl set-default multi-user.target

Alternativ kann man beim Raspberry auch über

sudo raspi-config

einstellen.

]]>https://forum.iobroker.net/post/969416https://forum.iobroker.net/post/969416Tue, 28 Mar 2023 05:34:30 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 23:02:50 GMT]]>@thomas-braun sagte in Iobroker Absturz:

@vandura

Stell das Boot Target auf Multiuser und bring nodejs auf die derzeitig empfohlene Version 18.

wie stelle ich das Boot Target um?

]]>https://forum.iobroker.net/post/969327https://forum.iobroker.net/post/969327Mon, 27 Mar 2023 23:02:50 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 17:32:54 GMT]]>@vandura

Stell das Boot Target auf Multiuser und bring nodejs auf die derzeitig empfohlene Version 18.

]]>https://forum.iobroker.net/post/969104https://forum.iobroker.net/post/969104Mon, 27 Mar 2023 17:32:54 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 14:55:53 GMT]]>@thomas-braun sagte in Iobroker Absturz:

@vandura

Hier hat das mal jemand festgehalten:

https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye

======================= SUMMARY =======================
                     v.2023-01-02


Operatingsystem:        Raspbian GNU/Linux 11 (bullseye)
Installation:           Native
Timezone:               Europe/Berlin
User-ID:                1000
X-Server:               false
Boot Target:            graphical.target

Pending OS-Updates:     0

Nodejs-Installation:    /usr/bin/nodejs         v16.19.1
                        /usr/bin/node           v16.19.1
                        /usr/bin/npm            8.19.3
                        /usr/bin/npx            8.19.3

ioBroker Core:          js-controller           4.0.24
                        admin                   6.3.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin:
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

Pending iob updates:    0

Active repo(s): Stable (default)

Objects:                8860
States:                 7736

Size of iob-Database:

17M     /opt/iobroker/iobroker-data/objects.json.migrated
17M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
15M     /opt/iobroker/iobroker-data/objects.jsonl
16K     /opt/iobroker/iobroker-data/objects.json.old
66M     /opt/iobroker/iobroker-data/states.jsonl
11M     /opt/iobroker/iobroker-data/states.json.migrated
11M     /opt/iobroker/iobroker-data/states.json.bak.migrated
7.3M    /opt/iobroker/iobroker-data/states.json.old


=================== END OF SUMMARY ====================
]]>https://forum.iobroker.net/post/969005https://forum.iobroker.net/post/969005Mon, 27 Mar 2023 14:55:53 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:39:25 GMT]]>@thomas-braun ok, schau ich mir an....Danke

]]>https://forum.iobroker.net/post/968981https://forum.iobroker.net/post/968981Mon, 27 Mar 2023 13:39:25 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:38:56 GMT]]>@vandura

Hier hat das mal jemand festgehalten:

https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye

]]>https://forum.iobroker.net/post/968980https://forum.iobroker.net/post/968980Mon, 27 Mar 2023 13:38:56 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:38:02 GMT]]>@thomas-braun
wie mache ich das ohne das alles weg ist......die Ahnung hab ich nicht....leider

]]>https://forum.iobroker.net/post/968979https://forum.iobroker.net/post/968979Mon, 27 Mar 2023 13:38:02 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:37:13 GMT]]>@vandura sagte in Iobroker Absturz:

ich beobachte es mal weiter

Installier da ein noch lebendes Betriebssytem!
Dein 'buster' ist tot.

]]>https://forum.iobroker.net/post/968977https://forum.iobroker.net/post/968977Mon, 27 Mar 2023 13:37:13 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:36:28 GMT]]>@vandura sagte in Iobroker Absturz:

@vandura sagte in Iobroker Absturz:

@thomas-braun sagte in Iobroker Absturz:

@vandura

sudo > /var/log/syslog.1
sudo > /var/log/kern.log.3.gz
sudo > /var/log/kern.log.4.gz

Nutzt dir aber nix, wenn du die Ursache nicht anpackst, das aktuelle log wird dir dann wieder um die Ohren fliegen.

Hat geklappt jetzt....ich beobachte es mal weiter, mihome-vacuum habe ich erst mal gelöscht....Danke für die Hilfe

]]>https://forum.iobroker.net/post/968976https://forum.iobroker.net/post/968976Mon, 27 Mar 2023 13:36:28 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:28:31 GMT]]>@vandura sagte in Iobroker Absturz:

kommt nur Permission denied.....?

Möglich.
Man kann auch files mit Attributen versehen, das selbst der root die nicht (ohne weiteres) löschen kann. Ich weiß aber nicht ob das bei den logs gemacht wird.

Versuch mal

sudo su
echo "" > /var/log/syslog.1
echo "" > /var/log/kern.log.3.gz
echo "" > /var/log/kern.log.4.gz
exit
]]>https://forum.iobroker.net/post/968974https://forum.iobroker.net/post/968974Mon, 27 Mar 2023 13:28:31 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:14:08 GMT]]>@vandura sagte in Iobroker Absturz:

@thomas-braun sagte in Iobroker Absturz:

@vandura

sudo > /var/log/syslog.1
sudo > /var/log/kern.log.3.gz
sudo > /var/log/kern.log.4.gz

Nutzt dir aber nix, wenn du die Ursache nicht anpackst, das aktuelle log wird dir dann wieder um die Ohren fliegen.

kommt nur Permission denied.....?

]]>https://forum.iobroker.net/post/968970https://forum.iobroker.net/post/968970Mon, 27 Mar 2023 13:14:08 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:13:47 GMT]]>@vandura sagte in Iobroker Absturz:

Ich tippe

Schau ins Log, tippen nutzt dir nix.

]]>https://forum.iobroker.net/post/968969https://forum.iobroker.net/post/968969Mon, 27 Mar 2023 13:13:47 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:13:17 GMT]]>@thomas-braun sagte in Iobroker Absturz:

@vandura

sudo > /var/log/syslog.1
sudo > /var/log/kern.log.3.gz
sudo > /var/log/kern.log.4.gz

Nutzt dir aber nix, wenn du die Ursache nicht anpackst, das aktuelle log wird dir dann wieder um die Ohren fliegen.

Ich tippe mal liegt am mihome-vacuum......der kackt immer ab

]]>https://forum.iobroker.net/post/968968https://forum.iobroker.net/post/968968Mon, 27 Mar 2023 13:13:17 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:11:23 GMT]]>@vandura

sudo > /var/log/syslog.1
sudo > /var/log/kern.log.3.gz
sudo > /var/log/kern.log.4.gz

Nutzt dir aber nix, wenn du die Ursache nicht anpackst, das aktuelle log wird dir dann wieder um die Ohren fliegen.

]]>https://forum.iobroker.net/post/968967https://forum.iobroker.net/post/968967Mon, 27 Mar 2023 13:11:23 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 13:07:25 GMT]]>@vandura

-rw-r----- 1 root adm  206G Mar 27 11:28 kern.log
-rw-r----- 1 root adm  4.2G Mar  8 17:47 kern.log.3.gz
-rw-r----- 1 root adm  3.4G Mar  7 09:53 kern.log.4.gz
-rw-r----- 1 root adm   47G Mar 27 14:39 syslog
-rw-r----- 1 root adm  160G Mar 27 00:00 syslog.1

kann man die Teile löschen?

]]>https://forum.iobroker.net/post/968966https://forum.iobroker.net/post/968966Mon, 27 Mar 2023 13:07:25 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 12:58:47 GMT]]>@thomas-braun sagte in Iobroker Absturz:

@vandura sagte in Iobroker Absturz:

Um 11:28 gab es offenbar einen Reboot.

das war ich selbst

]]>https://forum.iobroker.net/post/968962https://forum.iobroker.net/post/968962Mon, 27 Mar 2023 12:58:47 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 12:58:40 GMT]]>@vandura

Ich würde mir mein Backup vom iobroker schnappen und die Kiste neu und gescheit (d. h. OHNE Desktop und VNC und so 'nem Kram) aufsetzen.

]]>https://forum.iobroker.net/post/968961https://forum.iobroker.net/post/968961Mon, 27 Mar 2023 12:58:40 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 12:58:18 GMT]]>@thomas-braun sagte in Iobroker Absturz:

@vandura sagte in Iobroker Absturz:

Und ein vncserver-x11.log darf da auch nicht existieren, ganz einfach weil man kein X11 und auch kein VNC auf einem Server laufen lässt.

Weiß noch nicht mal was das ist......

]]>https://forum.iobroker.net/post/968960https://forum.iobroker.net/post/968960Mon, 27 Mar 2023 12:58:18 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 12:57:08 GMT]]>@vandura sagte in Iobroker Absturz:

Um 11:28 gab es offenbar einen Reboot.

]]>https://forum.iobroker.net/post/968959https://forum.iobroker.net/post/968959Mon, 27 Mar 2023 12:57:08 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 12:55:30 GMT]]>@thomas-braun

pi@raspberrypi:/var $ tail -n 100 /var/log/kern.log
Mar 27 11:28:16 raspberrypi kernel: [    3.253047]     HOME=/
Mar 27 11:28:16 raspberrypi kernel: [    3.253061]     TERM=linux
Mar 27 11:28:16 raspberrypi kernel: [    3.376336] usb 1-1.4: USB disconnect, device number 3
Mar 27 11:28:16 raspberrypi kernel: [    3.674376] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd
Mar 27 11:28:16 raspberrypi kernel: [    3.812994] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
Mar 27 11:28:16 raspberrypi kernel: [    3.813042] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 27 11:28:16 raspberrypi kernel: [    3.813078] usb 1-1.4: Product: ConBee II
Mar 27 11:28:16 raspberrypi kernel: [    3.813108] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH
Mar 27 11:28:16 raspberrypi kernel: [    3.813140] usb 1-1.4: SerialNumber: DE2218695
Mar 27 11:28:16 raspberrypi kernel: [    4.676546] NET: Registered protocol family 10
Mar 27 11:28:16 raspberrypi kernel: [    4.677949] Segment Routing with IPv6
Mar 27 11:28:16 raspberrypi kernel: [    6.562991] random: systemd: uninitialized urandom read (16 bytes read)
Mar 27 11:28:16 raspberrypi kernel: [    6.590967] random: systemd: uninitialized urandom read (16 bytes read)
Mar 27 11:28:16 raspberrypi kernel: [    6.592359] random: systemd: uninitialized urandom read (16 bytes read)
Mar 27 11:28:16 raspberrypi kernel: [    7.216983] usb 1-1.4: USB disconnect, device number 4
Mar 27 11:28:16 raspberrypi kernel: [    7.524380] usb 1-1.4: new full-speed USB device number 5 using xhci_hcd
Mar 27 11:28:16 raspberrypi kernel: [    7.663063] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
Mar 27 11:28:16 raspberrypi kernel: [    7.663087] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 27 11:28:16 raspberrypi kernel: [    7.663105] usb 1-1.4: Product: ConBee II
Mar 27 11:28:16 raspberrypi kernel: [    7.663122] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH
Mar 27 11:28:16 raspberrypi kernel: [    7.663139] usb 1-1.4: SerialNumber: DE2218695
Mar 27 11:28:16 raspberrypi kernel: [    8.694377] EXT4-fs (sda2): re-mounted. Opts: (null)
Mar 27 11:28:16 raspberrypi kernel: [   10.113741] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
Mar 27 11:28:16 raspberrypi kernel: [   10.116142] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
Mar 27 11:28:16 raspberrypi kernel: [   10.116775] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
Mar 27 11:28:16 raspberrypi kernel: [   10.117383] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
Mar 27 11:28:16 raspberrypi kernel: [   10.258105] mc: Linux media interface: v0.10
Mar 27 11:28:16 raspberrypi kernel: [   10.273992] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   10.358164] videodev: Linux video capture interface: v2.00
Mar 27 11:28:16 raspberrypi kernel: [   10.435146] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   10.437435] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Mar 27 11:28:16 raspberrypi kernel: [   10.437459] [vc_sm_connected_init]: start
Mar 27 11:28:16 raspberrypi kernel: [   10.438512] [vc_sm_connected_init]: installed successfully
Mar 27 11:28:16 raspberrypi kernel: [   10.438883] bcm2835_audio bcm2835_audio: card created with 8 channels
Mar 27 11:28:16 raspberrypi kernel: [   10.609786] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device
Mar 27 11:28:16 raspberrypi kernel: [   10.611221] usbcore: registered new interface driver cdc_acm
Mar 27 11:28:16 raspberrypi kernel: [   10.611239] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Mar 27 11:28:16 raspberrypi kernel: [   10.741564] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   10.741600] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   10.755577] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
Mar 27 11:28:16 raspberrypi kernel: [   10.962973] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   11.055770] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   11.068646] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
Mar 27 11:28:16 raspberrypi kernel: [   11.071775] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Mar 27 11:28:16 raspberrypi kernel: [   11.071782] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
Mar 27 11:28:16 raspberrypi kernel: [   11.072744] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
Mar 27 11:28:16 raspberrypi kernel: [   11.073083] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
Mar 27 11:28:16 raspberrypi kernel: [   11.073112] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
Mar 27 11:28:16 raspberrypi kernel: [   11.073137] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
Mar 27 11:28:16 raspberrypi kernel: [   11.073160] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
Mar 27 11:28:16 raspberrypi kernel: [   11.073183] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
Mar 27 11:28:16 raspberrypi kernel: [   11.073425] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
Mar 27 11:28:16 raspberrypi kernel: [   11.083601] [drm] No displays found. Consider forcing hotplug if HDMI is attached
Mar 27 11:28:16 raspberrypi kernel: [   11.083726] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
Mar 27 11:28:16 raspberrypi kernel: [   11.095958] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
Mar 27 11:28:16 raspberrypi kernel: [   11.096494] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Mar 27 11:28:16 raspberrypi kernel: [   11.096538] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Mar 27 11:28:16 raspberrypi kernel: [   11.098385] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Mar 27 11:28:16 raspberrypi kernel: [   11.103345] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Mar 27 11:28:16 raspberrypi kernel: [   11.103390] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Mar 27 11:28:16 raspberrypi kernel: [   11.108197] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Mar 27 11:28:16 raspberrypi kernel: [   11.108259] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Mar 27 11:28:16 raspberrypi kernel: [   11.126548] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
Mar 27 11:28:16 raspberrypi kernel: [   11.126596] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
Mar 27 11:28:16 raspberrypi kernel: [   11.157030] random: crng init done
Mar 27 11:28:16 raspberrypi kernel: [   11.157058] random: 7 urandom warning(s) missed due to ratelimiting
Mar 27 11:28:16 raspberrypi kernel: [   11.168321] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Mar 27 11:28:16 raspberrypi kernel: [   11.314650] sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar 27 11:28:16 raspberrypi kernel: [   11.410389] brcmfmac: F1 signature read @0x18000000=0x15264345
Mar 27 11:28:16 raspberrypi kernel: [   11.418858] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Mar 27 11:28:16 raspberrypi kernel: [   11.419550] usbcore: registered new interface driver brcmfmac
Mar 27 11:28:16 raspberrypi kernel: [   12.993487] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Mar 27 11:28:16 raspberrypi kernel: [   12.993606] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
Mar 27 11:28:16 raspberrypi kernel: [   13.043682] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
Mar 27 11:28:16 raspberrypi kernel: [   16.685590] uart-pl011 fe201000.serial: no DMA platform data
Mar 27 11:28:17 raspberrypi kernel: [   17.934114] 8021q: 802.1Q VLAN Support v1.8
Mar 27 11:28:20 raspberrypi kernel: [   21.187493] exfat: Deprecated parameter 'utf8'
Mar 27 11:28:20 raspberrypi kernel: [   21.187540] /dev/sda1: Can't open blockdev
Mar 27 11:28:24 raspberrypi kernel: [   25.312183] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Mar 27 11:28:25 raspberrypi kernel: [   25.665358] Bluetooth: Core ver 2.22
Mar 27 11:28:25 raspberrypi kernel: [   25.665455] NET: Registered protocol family 31
Mar 27 11:28:25 raspberrypi kernel: [   25.665470] Bluetooth: HCI device and connection manager initialized
Mar 27 11:28:25 raspberrypi kernel: [   25.665974] Bluetooth: HCI socket layer initialized
Mar 27 11:28:25 raspberrypi kernel: [   25.665995] Bluetooth: L2CAP socket layer initialized
Mar 27 11:28:25 raspberrypi kernel: [   25.666027] Bluetooth: SCO socket layer initialized
Mar 27 11:28:25 raspberrypi kernel: [   25.792451] Bluetooth: HCI UART driver ver 2.3
Mar 27 11:28:25 raspberrypi kernel: [   25.792469] Bluetooth: HCI UART protocol H4 registered
Mar 27 11:28:25 raspberrypi kernel: [   25.792546] Bluetooth: HCI UART protocol Three-wire (H5) registered
Mar 27 11:28:25 raspberrypi kernel: [   25.792788] Bluetooth: HCI UART protocol Broadcom registered
Mar 27 11:28:25 raspberrypi kernel: [   26.024737] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
Mar 27 11:28:25 raspberrypi kernel: [   26.025106] bcmgenet fd580000.ethernet eth0: Link is Down
Mar 27 11:28:26 raspberrypi kernel: [   26.844353] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k FS
Mar 27 11:28:27 raspberrypi kernel: [   27.465190] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Mar 27 11:28:27 raspberrypi kernel: [   27.465206] Bluetooth: BNEP filters: protocol multicast
Mar 27 11:28:27 raspberrypi kernel: [   27.465230] Bluetooth: BNEP socket layer initialized
Mar 27 11:28:28 raspberrypi kernel: [   29.124495] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Mar 27 11:28:28 raspberrypi kernel: [   29.124525] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Mar 27 11:28:30 raspberrypi kernel: [   31.036764] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead
Mar 27 11:28:30 raspberrypi kernel: [   31.159329] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Mar 27 11:28:31 raspberrypi kernel: [   31.834348] vcc-sd: disabling
pi@raspberrypi:/var $
]]>https://forum.iobroker.net/post/968958https://forum.iobroker.net/post/968958Mon, 27 Mar 2023 12:55:30 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 12:54:52 GMT]]>@vandura sagte in Iobroker Absturz:

Und ein vncserver-x11.log darf da auch nicht existieren, ganz einfach weil man kein X11 und auch kein VNC auf einem Server laufen lässt.

]]>https://forum.iobroker.net/post/968957https://forum.iobroker.net/post/968957Mon, 27 Mar 2023 12:54:52 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 12:53:01 GMT]]>@vandura sagte in Iobroker Absturz:

Da hast du deine dicken Dinger:

-rw-r----- 1 root adm  206G Mar 27 11:28 kern.log
-rw-r----- 1 root adm  4.2G Mar  8 17:47 kern.log.3.gz
-rw-r----- 1 root adm  3.4G Mar  7 09:53 kern.log.4.gz
-rw-r----- 1 root adm   47G Mar 27 14:39 syslog
-rw-r----- 1 root adm  160G Mar 27 00:00 syslog.1

Musste halt mal reinschauen, was da gerade los ist.

tail -n 100 /var/log/kern.log
]]>https://forum.iobroker.net/post/968956https://forum.iobroker.net/post/968956Mon, 27 Mar 2023 12:53:01 GMT<![CDATA[Reply to Iobroker Absturz on Mon, 27 Mar 2023 12:44:12 GMT]]>@thomas-braun sagte in Iobroker Absturz:

@vandura

Keine Bildchens...

ls -lAh /var/log

pi@raspberrypi:/var $ ls -lAh /var/log
total 419G
-rw-r--r-- 1 root root    0 Dec 27 00:00 alternatives.log
-rw-r--r-- 1 root root 3.3K Dec 26 12:28 alternatives.log.1
-rw-r--r-- 1 root root  108 Sep 24  2022 alternatives.log.2.gz
-rw-r--r-- 1 root root  682 Jun 22  2022 alternatives.log.3.gz
-rw-r--r-- 1 root root  108 Nov 18  2021 alternatives.log.4.gz
-rw-r--r-- 1 root root  168 Apr 25  2021 alternatives.log.5.gz
-rw-r--r-- 1 root root  214 Mar  5  2021 alternatives.log.6.gz
-rw-r--r-- 1 root root  232 Aug 17  2020 alternatives.log.7.gz
drwxr-xr-x 2 root root 4.0K Feb 19 00:00 apt
-rw-r----- 1 root adm   76K Mar 27 14:25 auth.log
-rw-r----- 1 root adm   34K Mar 25 23:17 auth.log.1
-rw-r----- 1 root adm  2.0K Mar 19 00:17 auth.log.2.gz
-rw-r----- 1 root adm  2.1K Mar 12 00:17 auth.log.3.gz
-rw-r----- 1 root adm  2.5K Mar  4 23:17 auth.log.4.gz
-rw-r--r-- 1 root root    0 May 27  2020 bootstrap.log
-rw-rw---- 1 root utmp    0 Mar  1 00:00 btmp
-rw-rw---- 1 root utmp    0 Feb  1 00:00 btmp.1
drwxr-xr-x 2 root root 4.0K Mar 27 00:00 cups
-rw-r----- 1 root adm  3.9M Mar 27 14:39 daemon.log
-rw-r----- 1 root adm   28M Mar 26 00:00 daemon.log.1
-rw-r----- 1 root adm  1.3M Mar 19 01:10 daemon.log.2.gz
-rw-r----- 1 root adm  1.1M Mar 12 00:55 daemon.log.3.gz
-rw-r----- 1 root adm  1.3M Mar  5 00:00 daemon.log.4.gz
-rw-r----- 1 root adm   13K Mar 27 11:28 debug
-rw-r----- 1 root adm  1.9K Mar 26 17:43 debug.1
-rw-r----- 1 root adm   615 Mar  8 17:47 debug.2.gz
-rw-r----- 1 root adm   611 Feb 22 16:20 debug.3.gz
-rw-r----- 1 root adm    87 Feb 18 13:33 debug.4.gz
-rw-r--r-- 1 root root    0 Feb 19 00:00 dpkg.log
-rw-r--r-- 1 root root  13K Feb 18 13:33 dpkg.log.1
-rw-r--r-- 1 root root  508 Sep 18  2021 dpkg.log.10.gz
-rw-r--r-- 1 root root 2.9K Apr 25  2021 dpkg.log.11.gz
-rw-r--r-- 1 root root 6.0K Mar  5  2021 dpkg.log.12.gz
-rw-r--r-- 1 root root 4.5K Dec 26 12:28 dpkg.log.2.gz
-rw-r--r-- 1 root root 4.0K Sep 24  2022 dpkg.log.3.gz
-rw-r--r-- 1 root root 5.0K Jun 22  2022 dpkg.log.4.gz
-rw-r--r-- 1 root root 1023 Feb 21  2022 dpkg.log.5.gz
-rw-r--r-- 1 root root 1.6K Jan  1  2022 dpkg.log.6.gz
-rw-r--r-- 1 root root 8.6K Nov 18  2021 dpkg.log.7.gz
-rw-r--r-- 1 root root 2.0K Oct 13  2021 dpkg.log.8.gz
-rw-r--r-- 1 root root  211 Oct 10  2021 dpkg.log.9.gz
-rw-r--r-- 1 root root  24K Nov 18  2021 faillog
-rw-r--r-- 1 root root 2.2K Nov 18  2021 fontconfig.log
-rw-r----- 1 root adm  206G Mar 27 11:28 kern.log
-rw-r----- 1 root adm   465 Mar 25 16:42 kern.log.1
-rw-r----- 1 root adm   135 Mar 16 10:54 kern.log.2.gz
-rw-r----- 1 root adm  4.2G Mar  8 17:47 kern.log.3.gz
-rw-r----- 1 root adm  3.4G Mar  7 09:53 kern.log.4.gz
-rw-rw-r-- 1 root utmp 286K Mar 27 14:12 lastlog
-rw-r----- 1 root adm  375K Mar 27 11:28 messages
-rw-r----- 1 root adm  4.3K Mar 26 00:00 messages.1
-rw-r----- 1 root adm   299 Mar 19 00:00 messages.2.gz
-rw-r----- 1 root adm   28K Mar 12 00:00 messages.3.gz
-rw-r----- 1 root adm   304 Mar  5 00:00 messages.4.gz
drwx------ 2 root root 4.0K May 27  2020 private
-rw-r--r-- 1 root root   66 Aug 16  2020 rpi-clone.log
-rw-r----- 1 root adm   47G Mar 27 14:39 syslog
-rw-r----- 1 root adm  160G Mar 27 00:00 syslog.1
-rw-r----- 1 root adm  178K Mar 26 00:00 syslog.2.gz
-rw-r----- 1 root adm  175K Mar 25 00:00 syslog.3.gz
-rw-r----- 1 root adm  178K Mar 24 00:00 syslog.4.gz
-rw-r----- 1 root adm  177K Mar 23 00:01 syslog.5.gz
-rw-r----- 1 root adm  177K Mar 22 00:00 syslog.6.gz
-rw-r----- 1 root adm  178K Mar 21 00:00 syslog.7.gz
-rw-r----- 1 root adm   42K Mar 27 11:28 user.log
-rw-r----- 1 root adm  3.1K Mar 26 00:00 user.log.1
-rw-r----- 1 root adm   173 Mar 19 00:00 user.log.2.gz
-rw-r----- 1 root adm  2.9K Mar 12 00:00 user.log.3.gz
-rw-r----- 1 root adm   177 Mar  5 00:00 user.log.4.gz
-rw------- 1 root root  12K Mar 27 11:28 vncserver-x11.log
-rw------- 1 root root  12K Mar 27 11:28 vncserver-x11.log.bak
-rw-rw-r-- 1 root utmp 584K Mar 27 14:12 wtmp
pi@raspberrypi:/var $
]]>https://forum.iobroker.net/post/968953https://forum.iobroker.net/post/968953Mon, 27 Mar 2023 12:44:12 GMT