iob diag - Skript
ioBroker Allgemein
787
Beiträge
49
Kommentatoren
219.4k
Aufrufe
38
Watching
-
Deine 5 tcp-Verbindungen sind aber eine harte Nuss für mich... :-)
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...Versuch nun nochmal, bitte.
@Thomas-Braun sagte in iob diag - Skript:
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...
Die Stabilität gibt mir für meinen Teil Recht auch wenn es 5 Instanzen sind.
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
@Thomas-Braun sagte in iob diag - Skript:
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...
Die Stabilität gibt mir für meinen Teil Recht auch wenn es 5 Instanzen sind.
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation ***Bitte nochmal.
-
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation ***Das schaut doch schon fast aus wie gewünscht...
Bitte jetzt nochmal laufen lassen.Ich brauch übrigens nur den Part ab
=== ZigBee Port Overview ===Der Code davor wird nicht geändert.
-
Komplett ohne Log:
Script v.2026-03-08 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: iobroker Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.17.13-1-pve Architecture: x86-64 OS is similar to: model name : Intel(R) Core(TM) i5-10500T CPU @ 2.30GHz CPU threads : 6 Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64bit Systemuptime and Load: 22:55:31 up 3:01, 2 users, load average: 0.41, 0.39, 0.31 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Sun 2026-03-08 22:55:31 CET Universal time: Sun 2026-03-08 21:55:31 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tobias HOME=/home/tobias GROUPS=tobias adm dialout sudo audio video plugdev users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/tobias GROUPS=iobroker tty dialout audio video plugdev redis *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 10G 4.6G 6.1G 2.4M 63M 6.2G Swap: 5.4G 0B 5.4G Total: 16G 4.6G 11G Active iob-Instances: 46 10240 M total memory 4355 M used memory 4240 M active memory 0 M inactive memory 5825 M free memory 0 M buffer memory 60 M swap cache 5120 M total swap 0 M used swap 5120 M free swap *** top - Table Of Processes *** top - 22:55:31 up 3:01, 2 users, load average: 0.41, 0.39, 0.31 Tasks: 78 total, 1 running, 77 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.6 us, 1.6 sy, 0.0 ni, 96.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 10240.0 total, 5824.9 free, 4356.4 used, 60.8 buff/cache MiB Swap: 5120.0 total, 5120.0 free, 0.0 used. 5883.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on DATA/subvol-400-disk-0 zfs 20G 4.3G 16G 22% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 16G 0 16G 0% /dev/tty tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 6.3G 152K 6.3G 1% /run tmpfs tmpfs 16G 1.9M 16G 1% /tmp tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 3.2G 12K 3.2G 1% /run/user/1000 Messages concerning filesystems in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / DATA/subvol-400-disk-0 zfs rw,relatime,xattr,posixacl,casesensitive Files in neuralgic directories: /var: 559M /var/ 221M /var/cache 219M /var/cache/apt 209M /var/lib 166M /var/cache/apt/archives Archived and active journals take up 125.1M in the file system. /opt/iobroker/backups: 136M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 31M /opt/iobroker/iobroker-data/ 27M /opt/iobroker/iobroker-data/files 20M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 20M /opt/iobroker/iobroker-data/files/admin.admin/custom 20M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 3.3M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 2.8M /opt/iobroker/iobroker-data/objects.jsonl 1.2M /opt/iobroker/iobroker-data/files/backitup.admin/custom/assets/index-00V6sJFg.js 1.2M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js 1.2M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-IIKn7Ixx.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** /usr/bin/nodejs v22.22.1 /usr/bin/node v22.22.1 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 ✓ Node.js installation is correct nodejs: Installed: 22.22.1-1nodesource1 Candidate: 22.22.1-1nodesource1 Version table: *** 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: iobroker iobroker (version: 7.1.0, hostname: iobroker , alive, uptime: 10891) Core adapters versions js-controller: 7.1.0 admin: 7.8.3 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled system.adapter.ankersolix2.0 : ankersolix2 : iobroker - disabled + system.adapter.awtrix-light.0 : awtrix-light : iobroker - enabled + system.adapter.awtrix-light.1 : awtrix-light : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.birthdays.0 : birthdays : iobroker - enabled + system.adapter.chromecast.0 : chromecast : iobroker - enabled + system.adapter.cloud.0 : cloud : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.lg-thinq.0 : lg-thinq : iobroker - disabled + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mytime.0 : mytime : iobroker - enabled + system.adapter.netatmo.0 : netatmo : iobroker - enabled + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nuki.0 : nuki : iobroker - enabled + system.adapter.operating-hours.0 : operating-hours : iobroker - enabled + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.ping.1 : ping : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.pushover.1 : pushover : iobroker - enabled + system.adapter.sayit.0 : sayit : iobroker - enabled + system.adapter.sayit.1 : sayit : iobroker - enabled + system.adapter.sayit.2 : sayit : iobroker - enabled + system.adapter.sayit.3 : sayit : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobroker - enabled + system.adapter.text2command.1 : text2command : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - disabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.8.3 , installed 7.8.3 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "ankersolix2" : 2.4.1 , installed 2.4.1 Adapter "awtrix-light" : 3.0.0 , installed 3.0.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "birthdays" : 5.0.0 , installed 5.0.0 Adapter "chromecast" : 4.1.1 , installed 4.1.1 Adapter "cloud" : 6.0.1 , installed 6.0.1 Adapter "device-watcher": 2.15.5 , installed 2.15.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "fb-checkpresence": 1.4.2 , installed 1.4.2 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "ical" : 1.19.7 , installed 1.19.7 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.1.0 , installed 7.1.0 Adapter "lg-thinq" : 1.1.6 , installed 1.1.6 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "mytime" : 2.3.2 , installed 2.3.2 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nuki" : 2.0.0 , installed 2.0.0 Adapter "operating-hours": 1.4.1 , installed 1.4.1 Adapter "ping" : 2.1.0 , installed 2.1.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "sayit" : 5.1.0 , installed 5.1.0 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 4.0.0 , installed 4.0.0 Adapter "trashschedule": 5.2.1 , installed 5.2.1 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-icontwo" : 2.11.1 , installed 2.11.1 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 12439 States: 11004 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Done Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process udp UNCONN 0 0 0.0.0.0:6666 0.0.0.0:* users:(("io.tuya.0",pid=943,fd=40)) udp UNCONN 0 0 0.0.0.0:6667 0.0.0.0:* users:(("io.tuya.0",pid=943,fd=41)) udp UNCONN 0 0 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=141,fd=5),("systemd",pid=1,fd=35)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("io.chromecast.0",pid=615,fd=35)) udp UNCONN 0 0 0.0.0.0:coap 0.0.0.0:* users:(("io.shelly.0",pid=899,fd=52)) udp UNCONN 0 0 [::]:sunrpc [::]:* users:(("rpcbind",pid=141,fd=7),("systemd",pid=1,fd=37)) tcp LISTEN 0 511 192.168.0.222:9092 0.0.0.0:* users:(("io.nuki.0",pid=808,fd=31)) tcp LISTEN 0 4096 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=141,fd=4),("systemd",pid=1,fd=34)) tcp LISTEN 0 511 0.0.0.0:1882 0.0.0.0:* users:(("io.shelly.1",pid=921,fd=45)) tcp LISTEN 0 511 0.0.0.0:1883 0.0.0.0:* users:(("io.mqtt.0",pid=756,fd=35)) tcp LISTEN 0 100 127.0.0.1:smtp 0.0.0.0:* users:(("master",pid=371,fd=13)) tcp LISTEN 0 511 127.0.0.1:redis 0.0.0.0:* users:(("redis-server",pid=164,fd=8)) tcp LISTEN 0 100 [::1]:smtp [::]:* users:(("master",pid=371,fd=14)) tcp LISTEN 0 511 [::1]:redis [::]:* users:(("redis-server",pid=164,fd=9)) tcp LISTEN 0 4096 [::]:sunrpc [::]:* users:(("rpcbind",pid=141,fd=6),("systemd",pid=1,fd=36)) tcp LISTEN 0 511 *:http *:* users:(("apache2",pid=207,fd=4),("apache2",pid=206,fd=4),("apache2",pid=204,fd=4)) tcp LISTEN 0 4096 *:ssh *:* users:(("sshd",pid=191,fd=3),("systemd",pid=1,fd=65)) tcp LISTEN 0 511 *:3000 *:* users:(("io.fullybrowser",pid=689,fd=30)) tcp LISTEN 0 511 *:8087 *:* users:(("io.simple-api.0",pid=1316,fd=35)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=1441,fd=35)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=401,fd=39))Das einfügen ab Listening Ports ist gerade schwierig. Müsste ich morgen Mal vom PC machen.
-
Komplett ohne Log:
Script v.2026-03-08 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: iobroker Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.17.13-1-pve Architecture: x86-64 OS is similar to: model name : Intel(R) Core(TM) i5-10500T CPU @ 2.30GHz CPU threads : 6 Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64bit Systemuptime and Load: 22:55:31 up 3:01, 2 users, load average: 0.41, 0.39, 0.31 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Sun 2026-03-08 22:55:31 CET Universal time: Sun 2026-03-08 21:55:31 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tobias HOME=/home/tobias GROUPS=tobias adm dialout sudo audio video plugdev users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/tobias GROUPS=iobroker tty dialout audio video plugdev redis *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 10G 4.6G 6.1G 2.4M 63M 6.2G Swap: 5.4G 0B 5.4G Total: 16G 4.6G 11G Active iob-Instances: 46 10240 M total memory 4355 M used memory 4240 M active memory 0 M inactive memory 5825 M free memory 0 M buffer memory 60 M swap cache 5120 M total swap 0 M used swap 5120 M free swap *** top - Table Of Processes *** top - 22:55:31 up 3:01, 2 users, load average: 0.41, 0.39, 0.31 Tasks: 78 total, 1 running, 77 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.6 us, 1.6 sy, 0.0 ni, 96.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 10240.0 total, 5824.9 free, 4356.4 used, 60.8 buff/cache MiB Swap: 5120.0 total, 5120.0 free, 0.0 used. 5883.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on DATA/subvol-400-disk-0 zfs 20G 4.3G 16G 22% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 16G 0 16G 0% /dev/tty tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 6.3G 152K 6.3G 1% /run tmpfs tmpfs 16G 1.9M 16G 1% /tmp tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 3.2G 12K 3.2G 1% /run/user/1000 Messages concerning filesystems in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / DATA/subvol-400-disk-0 zfs rw,relatime,xattr,posixacl,casesensitive Files in neuralgic directories: /var: 559M /var/ 221M /var/cache 219M /var/cache/apt 209M /var/lib 166M /var/cache/apt/archives Archived and active journals take up 125.1M in the file system. /opt/iobroker/backups: 136M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 31M /opt/iobroker/iobroker-data/ 27M /opt/iobroker/iobroker-data/files 20M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 20M /opt/iobroker/iobroker-data/files/admin.admin/custom 20M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 3.3M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 2.8M /opt/iobroker/iobroker-data/objects.jsonl 1.2M /opt/iobroker/iobroker-data/files/backitup.admin/custom/assets/index-00V6sJFg.js 1.2M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js 1.2M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-IIKn7Ixx.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** /usr/bin/nodejs v22.22.1 /usr/bin/node v22.22.1 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 ✓ Node.js installation is correct nodejs: Installed: 22.22.1-1nodesource1 Candidate: 22.22.1-1nodesource1 Version table: *** 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: iobroker iobroker (version: 7.1.0, hostname: iobroker , alive, uptime: 10891) Core adapters versions js-controller: 7.1.0 admin: 7.8.3 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled system.adapter.ankersolix2.0 : ankersolix2 : iobroker - disabled + system.adapter.awtrix-light.0 : awtrix-light : iobroker - enabled + system.adapter.awtrix-light.1 : awtrix-light : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.birthdays.0 : birthdays : iobroker - enabled + system.adapter.chromecast.0 : chromecast : iobroker - enabled + system.adapter.cloud.0 : cloud : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.lg-thinq.0 : lg-thinq : iobroker - disabled + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mytime.0 : mytime : iobroker - enabled + system.adapter.netatmo.0 : netatmo : iobroker - enabled + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nuki.0 : nuki : iobroker - enabled + system.adapter.operating-hours.0 : operating-hours : iobroker - enabled + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.ping.1 : ping : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.pushover.1 : pushover : iobroker - enabled + system.adapter.sayit.0 : sayit : iobroker - enabled + system.adapter.sayit.1 : sayit : iobroker - enabled + system.adapter.sayit.2 : sayit : iobroker - enabled + system.adapter.sayit.3 : sayit : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobroker - enabled + system.adapter.text2command.1 : text2command : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - disabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.8.3 , installed 7.8.3 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "ankersolix2" : 2.4.1 , installed 2.4.1 Adapter "awtrix-light" : 3.0.0 , installed 3.0.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "birthdays" : 5.0.0 , installed 5.0.0 Adapter "chromecast" : 4.1.1 , installed 4.1.1 Adapter "cloud" : 6.0.1 , installed 6.0.1 Adapter "device-watcher": 2.15.5 , installed 2.15.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "fb-checkpresence": 1.4.2 , installed 1.4.2 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "ical" : 1.19.7 , installed 1.19.7 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.1.0 , installed 7.1.0 Adapter "lg-thinq" : 1.1.6 , installed 1.1.6 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "mytime" : 2.3.2 , installed 2.3.2 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nuki" : 2.0.0 , installed 2.0.0 Adapter "operating-hours": 1.4.1 , installed 1.4.1 Adapter "ping" : 2.1.0 , installed 2.1.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "sayit" : 5.1.0 , installed 5.1.0 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 4.0.0 , installed 4.0.0 Adapter "trashschedule": 5.2.1 , installed 5.2.1 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-icontwo" : 2.11.1 , installed 2.11.1 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 12439 States: 11004 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Done Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process udp UNCONN 0 0 0.0.0.0:6666 0.0.0.0:* users:(("io.tuya.0",pid=943,fd=40)) udp UNCONN 0 0 0.0.0.0:6667 0.0.0.0:* users:(("io.tuya.0",pid=943,fd=41)) udp UNCONN 0 0 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=141,fd=5),("systemd",pid=1,fd=35)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("io.chromecast.0",pid=615,fd=35)) udp UNCONN 0 0 0.0.0.0:coap 0.0.0.0:* users:(("io.shelly.0",pid=899,fd=52)) udp UNCONN 0 0 [::]:sunrpc [::]:* users:(("rpcbind",pid=141,fd=7),("systemd",pid=1,fd=37)) tcp LISTEN 0 511 192.168.0.222:9092 0.0.0.0:* users:(("io.nuki.0",pid=808,fd=31)) tcp LISTEN 0 4096 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=141,fd=4),("systemd",pid=1,fd=34)) tcp LISTEN 0 511 0.0.0.0:1882 0.0.0.0:* users:(("io.shelly.1",pid=921,fd=45)) tcp LISTEN 0 511 0.0.0.0:1883 0.0.0.0:* users:(("io.mqtt.0",pid=756,fd=35)) tcp LISTEN 0 100 127.0.0.1:smtp 0.0.0.0:* users:(("master",pid=371,fd=13)) tcp LISTEN 0 511 127.0.0.1:redis 0.0.0.0:* users:(("redis-server",pid=164,fd=8)) tcp LISTEN 0 100 [::1]:smtp [::]:* users:(("master",pid=371,fd=14)) tcp LISTEN 0 511 [::1]:redis [::]:* users:(("redis-server",pid=164,fd=9)) tcp LISTEN 0 4096 [::]:sunrpc [::]:* users:(("rpcbind",pid=141,fd=6),("systemd",pid=1,fd=36)) tcp LISTEN 0 511 *:http *:* users:(("apache2",pid=207,fd=4),("apache2",pid=206,fd=4),("apache2",pid=204,fd=4)) tcp LISTEN 0 4096 *:ssh *:* users:(("sshd",pid=191,fd=3),("systemd",pid=1,fd=65)) tcp LISTEN 0 511 *:3000 *:* users:(("io.fullybrowser",pid=689,fd=30)) tcp LISTEN 0 511 *:8087 *:* users:(("io.simple-api.0",pid=1316,fd=35)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=1441,fd=35)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=401,fd=39))Das einfügen ab Listening Ports ist gerade schwierig. Müsste ich morgen Mal vom PC machen.
Nur die Tabelle mit den Zigbee-Ports (oder wie es gerade bei dir aussieht) reicht.
Versuch nochmal.
-
Leider als Bild
Proxmox 9 HA-Cluster mit 3x HP prodesk 400 G6 i5
Bei einem downvote bitte melden, es könnte sein, dass dieser ungewollt ist! -
Oder meinst du den Bereich:
Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 -
Leider als Bild
???
Nein, ich meine nur die Zigbee-relevante Tabelle mit
=== ZigBee Port Overview ===
überschrieben.Bei mir halt dieses Layout:
=== ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 ...00_23_93_2C_A8-if00-port0 ...00_23_93_2C_A8-if00-port0 ✓ MatchingDeine Listening Ports spielen keine Rolle.
-
Jetzt ist es wohl spät, ich...
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' *** NodeJS-Installation *** -
Jetzt ist es wohl spät, ich...
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' *** NodeJS-Installation ***Ich hab sed jetzt angepasst. Versuch nochmal.
-
Erwartest du das so?
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' *** NodeJS-Installation ***Proxmox 9 HA-Cluster mit 3x HP prodesk 400 G6 i5
Bei einem downvote bitte melden, es könnte sein, dass dieser ungewollt ist! -
Und nochmal:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 FILENAME="-" FNR=1 NR=1 *** NodeJS-Installation *** -
Erwartest du das so?
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' *** NodeJS-Installation ***Mist...
Dann halt einfacheren Code...
Bitte nochmal. -
Hatt sich noch nichts geändert
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 FILENAME="-" FNR=1 NR=1 *** NodeJS-Installation *** -
Hatt sich noch nichts geändert
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 FILENAME="-" FNR=1 NR=1 *** NodeJS-Installation ***@Shadowhunter23 sagte in iob diag - Skript:
Hatt sich noch nichts geändert
Ich hab es auch vergessen hochzuladen...
Bitte jetzt nochmal. -
Habs x mal erneuert:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 FILENAME="-" FNR=1 NR=1 *** NodeJS-Installation *** -
Jetzt sieht es besser aus:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation ***
582
Online32.7k
Benutzer82.5k
Themen1.3m
Beiträge