iob diag - Skript
-
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation ***Das schaut doch schon fast aus wie gewünscht...
Bitte jetzt nochmal laufen lassen.Ich brauch übrigens nur den Part ab
=== ZigBee Port Overview ===Der Code davor wird nicht geändert.
-
Komplett ohne Log:
Script v.2026-03-08 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: iobroker Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.17.13-1-pve Architecture: x86-64 OS is similar to: model name : Intel(R) Core(TM) i5-10500T CPU @ 2.30GHz CPU threads : 6 Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64bit Systemuptime and Load: 22:55:31 up 3:01, 2 users, load average: 0.41, 0.39, 0.31 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Sun 2026-03-08 22:55:31 CET Universal time: Sun 2026-03-08 21:55:31 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tobias HOME=/home/tobias GROUPS=tobias adm dialout sudo audio video plugdev users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/tobias GROUPS=iobroker tty dialout audio video plugdev redis *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 10G 4.6G 6.1G 2.4M 63M 6.2G Swap: 5.4G 0B 5.4G Total: 16G 4.6G 11G Active iob-Instances: 46 10240 M total memory 4355 M used memory 4240 M active memory 0 M inactive memory 5825 M free memory 0 M buffer memory 60 M swap cache 5120 M total swap 0 M used swap 5120 M free swap *** top - Table Of Processes *** top - 22:55:31 up 3:01, 2 users, load average: 0.41, 0.39, 0.31 Tasks: 78 total, 1 running, 77 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.6 us, 1.6 sy, 0.0 ni, 96.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 10240.0 total, 5824.9 free, 4356.4 used, 60.8 buff/cache MiB Swap: 5120.0 total, 5120.0 free, 0.0 used. 5883.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on DATA/subvol-400-disk-0 zfs 20G 4.3G 16G 22% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 16G 0 16G 0% /dev/tty tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 6.3G 152K 6.3G 1% /run tmpfs tmpfs 16G 1.9M 16G 1% /tmp tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 3.2G 12K 3.2G 1% /run/user/1000 Messages concerning filesystems in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / DATA/subvol-400-disk-0 zfs rw,relatime,xattr,posixacl,casesensitive Files in neuralgic directories: /var: 559M /var/ 221M /var/cache 219M /var/cache/apt 209M /var/lib 166M /var/cache/apt/archives Archived and active journals take up 125.1M in the file system. /opt/iobroker/backups: 136M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 31M /opt/iobroker/iobroker-data/ 27M /opt/iobroker/iobroker-data/files 20M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 20M /opt/iobroker/iobroker-data/files/admin.admin/custom 20M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 3.3M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 2.8M /opt/iobroker/iobroker-data/objects.jsonl 1.2M /opt/iobroker/iobroker-data/files/backitup.admin/custom/assets/index-00V6sJFg.js 1.2M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js 1.2M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-IIKn7Ixx.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** /usr/bin/nodejs v22.22.1 /usr/bin/node v22.22.1 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 ✓ Node.js installation is correct nodejs: Installed: 22.22.1-1nodesource1 Candidate: 22.22.1-1nodesource1 Version table: *** 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: iobroker iobroker (version: 7.1.0, hostname: iobroker , alive, uptime: 10891) Core adapters versions js-controller: 7.1.0 admin: 7.8.3 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled system.adapter.ankersolix2.0 : ankersolix2 : iobroker - disabled + system.adapter.awtrix-light.0 : awtrix-light : iobroker - enabled + system.adapter.awtrix-light.1 : awtrix-light : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.birthdays.0 : birthdays : iobroker - enabled + system.adapter.chromecast.0 : chromecast : iobroker - enabled + system.adapter.cloud.0 : cloud : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.lg-thinq.0 : lg-thinq : iobroker - disabled + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mytime.0 : mytime : iobroker - enabled + system.adapter.netatmo.0 : netatmo : iobroker - enabled + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nuki.0 : nuki : iobroker - enabled + system.adapter.operating-hours.0 : operating-hours : iobroker - enabled + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.ping.1 : ping : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.pushover.1 : pushover : iobroker - enabled + system.adapter.sayit.0 : sayit : iobroker - enabled + system.adapter.sayit.1 : sayit : iobroker - enabled + system.adapter.sayit.2 : sayit : iobroker - enabled + system.adapter.sayit.3 : sayit : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobroker - enabled + system.adapter.text2command.1 : text2command : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - disabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.8.3 , installed 7.8.3 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "ankersolix2" : 2.4.1 , installed 2.4.1 Adapter "awtrix-light" : 3.0.0 , installed 3.0.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "birthdays" : 5.0.0 , installed 5.0.0 Adapter "chromecast" : 4.1.1 , installed 4.1.1 Adapter "cloud" : 6.0.1 , installed 6.0.1 Adapter "device-watcher": 2.15.5 , installed 2.15.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "fb-checkpresence": 1.4.2 , installed 1.4.2 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "ical" : 1.19.7 , installed 1.19.7 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.1.0 , installed 7.1.0 Adapter "lg-thinq" : 1.1.6 , installed 1.1.6 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "mytime" : 2.3.2 , installed 2.3.2 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nuki" : 2.0.0 , installed 2.0.0 Adapter "operating-hours": 1.4.1 , installed 1.4.1 Adapter "ping" : 2.1.0 , installed 2.1.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "sayit" : 5.1.0 , installed 5.1.0 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 4.0.0 , installed 4.0.0 Adapter "trashschedule": 5.2.1 , installed 5.2.1 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-icontwo" : 2.11.1 , installed 2.11.1 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 12439 States: 11004 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Done Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process udp UNCONN 0 0 0.0.0.0:6666 0.0.0.0:* users:(("io.tuya.0",pid=943,fd=40)) udp UNCONN 0 0 0.0.0.0:6667 0.0.0.0:* users:(("io.tuya.0",pid=943,fd=41)) udp UNCONN 0 0 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=141,fd=5),("systemd",pid=1,fd=35)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("io.chromecast.0",pid=615,fd=35)) udp UNCONN 0 0 0.0.0.0:coap 0.0.0.0:* users:(("io.shelly.0",pid=899,fd=52)) udp UNCONN 0 0 [::]:sunrpc [::]:* users:(("rpcbind",pid=141,fd=7),("systemd",pid=1,fd=37)) tcp LISTEN 0 511 192.168.0.222:9092 0.0.0.0:* users:(("io.nuki.0",pid=808,fd=31)) tcp LISTEN 0 4096 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=141,fd=4),("systemd",pid=1,fd=34)) tcp LISTEN 0 511 0.0.0.0:1882 0.0.0.0:* users:(("io.shelly.1",pid=921,fd=45)) tcp LISTEN 0 511 0.0.0.0:1883 0.0.0.0:* users:(("io.mqtt.0",pid=756,fd=35)) tcp LISTEN 0 100 127.0.0.1:smtp 0.0.0.0:* users:(("master",pid=371,fd=13)) tcp LISTEN 0 511 127.0.0.1:redis 0.0.0.0:* users:(("redis-server",pid=164,fd=8)) tcp LISTEN 0 100 [::1]:smtp [::]:* users:(("master",pid=371,fd=14)) tcp LISTEN 0 511 [::1]:redis [::]:* users:(("redis-server",pid=164,fd=9)) tcp LISTEN 0 4096 [::]:sunrpc [::]:* users:(("rpcbind",pid=141,fd=6),("systemd",pid=1,fd=36)) tcp LISTEN 0 511 *:http *:* users:(("apache2",pid=207,fd=4),("apache2",pid=206,fd=4),("apache2",pid=204,fd=4)) tcp LISTEN 0 4096 *:ssh *:* users:(("sshd",pid=191,fd=3),("systemd",pid=1,fd=65)) tcp LISTEN 0 511 *:3000 *:* users:(("io.fullybrowser",pid=689,fd=30)) tcp LISTEN 0 511 *:8087 *:* users:(("io.simple-api.0",pid=1316,fd=35)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=1441,fd=35)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=401,fd=39))Das einfügen ab Listening Ports ist gerade schwierig. Müsste ich morgen Mal vom PC machen.
-
Komplett ohne Log:
Script v.2026-03-08 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: iobroker Icon name: computer-container Chassis: container ☐ Virtualization: lxc Kernel: Linux 6.17.13-1-pve Architecture: x86-64 OS is similar to: model name : Intel(R) Core(TM) i5-10500T CPU @ 2.30GHz CPU threads : 6 Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64bit Systemuptime and Load: 22:55:31 up 3:01, 2 users, load average: 0.41, 0.39, 0.31 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** TIME AND TIMEZONES *** Local time: Sun 2026-03-08 22:55:31 CET Universal time: Sun 2026-03-08 21:55:31 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': tobias HOME=/home/tobias GROUPS=tobias adm dialout sudo audio video plugdev users iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/tobias GROUPS=iobroker tty dialout audio video plugdev redis *** DISPLAY-SERVER SETUP *** Display-Server: Unknown Display-Manager: Not found Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 10G 4.6G 6.1G 2.4M 63M 6.2G Swap: 5.4G 0B 5.4G Total: 16G 4.6G 11G Active iob-Instances: 46 10240 M total memory 4355 M used memory 4240 M active memory 0 M inactive memory 5825 M free memory 0 M buffer memory 60 M swap cache 5120 M total swap 0 M used swap 5120 M free swap *** top - Table Of Processes *** top - 22:55:31 up 3:01, 2 users, load average: 0.41, 0.39, 0.31 Tasks: 78 total, 1 running, 77 sleeping, 0 stopped, 0 zombie %Cpu(s): 1.6 us, 1.6 sy, 0.0 ni, 96.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 10240.0 total, 5824.9 free, 4356.4 used, 60.8 buff/cache MiB Swap: 5120.0 total, 5120.0 free, 0.0 used. 5883.6 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured Legend: LOAD -> Reflects whether the unit definition was properly loaded. ACTIVE -> The high-level unit activation state, i.e. generalization of SUB. SUB -> The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on DATA/subvol-400-disk-0 zfs 20G 4.3G 16G 22% / none tmpfs 492K 4.0K 488K 1% /dev udev devtmpfs 16G 0 16G 0% /dev/tty tmpfs tmpfs 16G 0 16G 0% /dev/shm tmpfs tmpfs 6.3G 152K 6.3G 1% /run tmpfs tmpfs 16G 1.9M 16G 1% /tmp tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 3.2G 12K 3.2G 1% /run/user/1000 Messages concerning filesystems in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / DATA/subvol-400-disk-0 zfs rw,relatime,xattr,posixacl,casesensitive Files in neuralgic directories: /var: 559M /var/ 221M /var/cache 219M /var/cache/apt 209M /var/lib 166M /var/cache/apt/archives Archived and active journals take up 125.1M in the file system. /opt/iobroker/backups: 136M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 31M /opt/iobroker/iobroker-data/ 27M /opt/iobroker/iobroker-data/files 20M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets 20M /opt/iobroker/iobroker-data/files/admin.admin/custom 20M /opt/iobroker/iobroker-data/files/admin.admin The five largest files in iobroker-data are: 3.3M /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-BBu8-Y_o.js 2.8M /opt/iobroker/iobroker-data/objects.jsonl 1.2M /opt/iobroker/iobroker-data/files/backitup.admin/custom/assets/index-00V6sJFg.js 1.2M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-ZPb95xPG.js 1.2M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets/index-IIKn7Ixx.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** /usr/bin/nodejs v22.22.1 /usr/bin/node v22.22.1 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 ✓ Node.js installation is correct nodejs: Installed: 22.22.1-1nodesource1 Candidate: 22.22.1-1nodesource1 Version table: *** 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main amd64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. At least one iobroker host is running. Objects type: redis States type: redis Hosts: iobroker iobroker (version: 7.1.0, hostname: iobroker , alive, uptime: 10891) Core adapters versions js-controller: 7.1.0 admin: 7.8.3 javascript: 9.0.18 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled system.adapter.ankersolix2.0 : ankersolix2 : iobroker - disabled + system.adapter.awtrix-light.0 : awtrix-light : iobroker - enabled + system.adapter.awtrix-light.1 : awtrix-light : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.birthdays.0 : birthdays : iobroker - enabled + system.adapter.chromecast.0 : chromecast : iobroker - enabled + system.adapter.cloud.0 : cloud : iobroker - enabled + system.adapter.device-watcher.0 : device-watcher : iobroker - enabled + system.adapter.email.0 : email : iobroker - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : iobroker - enabled + system.adapter.fritzdect.0 : fritzdect : iobroker - enabled + system.adapter.fullybrowser.0 : fullybrowser : iobroker - enabled system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled + system.adapter.iot.0 : iot : iobroker - enabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.lg-thinq.0 : lg-thinq : iobroker - disabled + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.mytime.0 : mytime : iobroker - enabled + system.adapter.netatmo.0 : netatmo : iobroker - enabled + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.nuki.0 : nuki : iobroker - enabled + system.adapter.operating-hours.0 : operating-hours : iobroker - enabled + system.adapter.ping.0 : ping : iobroker - enabled + system.adapter.ping.1 : ping : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.pushover.1 : pushover : iobroker - enabled + system.adapter.sayit.0 : sayit : iobroker - enabled + system.adapter.sayit.1 : sayit : iobroker - enabled + system.adapter.sayit.2 : sayit : iobroker - enabled + system.adapter.sayit.3 : sayit : iobroker - enabled + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : iobroker - enabled + system.adapter.text2command.1 : text2command : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - disabled system.adapter.vis.0 : vis : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.8.3 , installed 7.8.3 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "ankersolix2" : 2.4.1 , installed 2.4.1 Adapter "awtrix-light" : 3.0.0 , installed 3.0.0 Adapter "backitup" : 3.3.14 , installed 3.3.14 Adapter "birthdays" : 5.0.0 , installed 5.0.0 Adapter "chromecast" : 4.1.1 , installed 4.1.1 Adapter "cloud" : 6.0.1 , installed 6.0.1 Adapter "device-watcher": 2.15.5 , installed 2.15.5 Adapter "email" : 2.0.4 , installed 2.0.4 Adapter "fb-checkpresence": 1.4.2 , installed 1.4.2 Adapter "fritzdect" : 2.6.2 , installed 2.6.2 Adapter "fullybrowser" : 3.1.2 , installed 3.1.2 Adapter "ical" : 1.19.7 , installed 1.19.7 Adapter "iot" : 5.0.12 , installed 5.0.12 Adapter "javascript" : 9.0.18 , installed 9.0.18 Controller "js-controller": 7.1.0 , installed 7.1.0 Adapter "lg-thinq" : 1.1.6 , installed 1.1.6 Adapter "mqtt" : 6.1.4 , installed 6.1.4 Adapter "mqtt-client" : 3.0.0 , installed 3.0.0 Adapter "mytime" : 2.3.2 , installed 2.3.2 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "notification-manager": 1.3.0, installed 1.3.0 Adapter "nuki" : 2.0.0 , installed 2.0.0 Adapter "operating-hours": 1.4.1 , installed 1.4.1 Adapter "ping" : 2.1.0 , installed 2.1.0 Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "sayit" : 5.1.0 , installed 5.1.0 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "simple-api" : 3.0.7 , installed 3.0.7 Adapter "socketio" : 7.0.8 , installed 7.0.8 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "text2command" : 4.0.0 , installed 4.0.0 Adapter "trashschedule": 5.2.1 , installed 5.2.1 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-icontwo" : 2.11.1 , installed 2.11.1 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.13 , installed 2.5.13 Adapter "web" : 8.0.0 , installed 8.0.0 Adapter "ws" : 4.0.0 , installed 4.0.0 Adapter "zigbee" : 3.3.5 , installed 3.3.5 Objects and States Please stand by - This may take a while Objects: 12439 States: 11004 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org trixie-security InRelease Hit:2 http://deb.debian.org/debian trixie InRelease Hit:3 http://deb.debian.org/debian trixie-updates InRelease Hit:4 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Done Pending systemupdates: 0 *** Listening Ports *** Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process udp UNCONN 0 0 0.0.0.0:6666 0.0.0.0:* users:(("io.tuya.0",pid=943,fd=40)) udp UNCONN 0 0 0.0.0.0:6667 0.0.0.0:* users:(("io.tuya.0",pid=943,fd=41)) udp UNCONN 0 0 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=141,fd=5),("systemd",pid=1,fd=35)) udp UNCONN 0 0 0.0.0.0:mdns 0.0.0.0:* users:(("io.chromecast.0",pid=615,fd=35)) udp UNCONN 0 0 0.0.0.0:coap 0.0.0.0:* users:(("io.shelly.0",pid=899,fd=52)) udp UNCONN 0 0 [::]:sunrpc [::]:* users:(("rpcbind",pid=141,fd=7),("systemd",pid=1,fd=37)) tcp LISTEN 0 511 192.168.0.222:9092 0.0.0.0:* users:(("io.nuki.0",pid=808,fd=31)) tcp LISTEN 0 4096 0.0.0.0:sunrpc 0.0.0.0:* users:(("rpcbind",pid=141,fd=4),("systemd",pid=1,fd=34)) tcp LISTEN 0 511 0.0.0.0:1882 0.0.0.0:* users:(("io.shelly.1",pid=921,fd=45)) tcp LISTEN 0 511 0.0.0.0:1883 0.0.0.0:* users:(("io.mqtt.0",pid=756,fd=35)) tcp LISTEN 0 100 127.0.0.1:smtp 0.0.0.0:* users:(("master",pid=371,fd=13)) tcp LISTEN 0 511 127.0.0.1:redis 0.0.0.0:* users:(("redis-server",pid=164,fd=8)) tcp LISTEN 0 100 [::1]:smtp [::]:* users:(("master",pid=371,fd=14)) tcp LISTEN 0 511 [::1]:redis [::]:* users:(("redis-server",pid=164,fd=9)) tcp LISTEN 0 4096 [::]:sunrpc [::]:* users:(("rpcbind",pid=141,fd=6),("systemd",pid=1,fd=36)) tcp LISTEN 0 511 *:http *:* users:(("apache2",pid=207,fd=4),("apache2",pid=206,fd=4),("apache2",pid=204,fd=4)) tcp LISTEN 0 4096 *:ssh *:* users:(("sshd",pid=191,fd=3),("systemd",pid=1,fd=65)) tcp LISTEN 0 511 *:3000 *:* users:(("io.fullybrowser",pid=689,fd=30)) tcp LISTEN 0 511 *:8087 *:* users:(("io.simple-api.0",pid=1316,fd=35)) tcp LISTEN 0 511 *:8082 *:* users:(("io.web.0",pid=1441,fd=35)) tcp LISTEN 0 511 *:tproxy *:* users:(("io.admin.0",pid=401,fd=39))Das einfügen ab Listening Ports ist gerade schwierig. Müsste ich morgen Mal vom PC machen.
Nur die Tabelle mit den Zigbee-Ports (oder wie es gerade bei dir aussieht) reicht.
Versuch nochmal.
-
Leider als Bild
Proxmox 9 HA-Cluster mit 3x HP prodesk 400 G6 i5
Bei einem downvote bitte melden, es könnte sein, dass dieser ungewollt ist! -
Oder meinst du den Bereich:
Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt-client.0 : mqtt-client : iobroker - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.shelly.0 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shelly.1 : shelly : iobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : iobroker - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.telegram.1 : telegram : iobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 -
Leider als Bild
???
Nein, ich meine nur die Zigbee-relevante Tabelle mit
=== ZigBee Port Overview ===
überschrieben.Bei mir halt dieses Layout:
=== ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 ...00_23_93_2C_A8-if00-port0 ...00_23_93_2C_A8-if00-port0 ✓ MatchingDeine Listening Ports spielen keine Rolle.
-
Jetzt ist es wohl spät, ich...
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' *** NodeJS-Installation *** -
Jetzt ist es wohl spät, ich...
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' *** NodeJS-Installation ***Ich hab sed jetzt angepasst. Versuch nochmal.
-
Erwartest du das so?
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' *** NodeJS-Installation ***Proxmox 9 HA-Cluster mit 3x HP prodesk 400 G6 i5
Bei einem downvote bitte melden, es könnte sein, dass dieser ungewollt ist! -
Und nochmal:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 FILENAME="-" FNR=1 NR=1 *** NodeJS-Installation *** -
Erwartest du das so?
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' sed: -e expression #1, char 134: unknown command: `/' *** NodeJS-Installation ***Mist...
Dann halt einfacheren Code...
Bitte nochmal. -
Hatt sich noch nichts geändert
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 FILENAME="-" FNR=1 NR=1 *** NodeJS-Installation *** -
Hatt sich noch nichts geändert
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 FILENAME="-" FNR=1 NR=1 *** NodeJS-Installation ***@Shadowhunter23 sagte in iob diag - Skript:
Hatt sich noch nichts geändert
Ich hab es auch vergessen hochzuladen...
Bitte jetzt nochmal. -
Habs x mal erneuert:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: tcp://192.168.0.64:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.1 : zigbee : iobroker - enabled, port: tcp://192.168.0.69:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.2 : zigbee : iobroker - enabled, port: tcp://192.168.0.79:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.3 : zigbee : iobroker - enabled, port: tcp://192.168.0.63:20108 FILENAME="-" FNR=1 NR=1 awk: run time error: regular expression compile failed (missing operand) + system.adapter.zigbee.4 : zigbee : iobroker - enabled, port: tcp://192.168.0.99:20108 FILENAME="-" FNR=1 NR=1 *** NodeJS-Installation *** -
Jetzt sieht es besser aus:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
Jetzt sieht es besser aus:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation ***Ah, das sieht wie gewollt aus.
Kannst du es jetzt nochmal laden?
Ich hoffe das war es dann.Bei mir schaut die Ausgabe nun so aus:
=== ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 ...00_23_93_2C_A8-if00-port0 ...00_23_93_2C_A8-if00-port0 ✓ Matching -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation ***Super, so sollte es aussehen. Und die Werte sind auch richtig zugeordnet?
Also zigbee.0 ist mit tcp://192.168.0.64:20108 konfiguriert?
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden570
Online32.7k
Benutzer82.6k
Themen1.3m
Beiträge