Monatsrückblick Januar/Februar 2026 ist online!

[Thomas Braun]

Eine neue Testrunde!
Ich habe den Code des Skripts etwas aufgeräumt und Shellcheck hat jetzt nichts mehr zu bemängeln.

Und ich habe den Part mit den ZigBee-Ports neugeschrieben (bzw. von KI schreiben lassen und nur hier und da was korrigiert). Hier wäre es insbesondere schön zu sehen, wie das bei mehreren ZigBee-Sticks und/oder Instanzen des Adapters aussieht. Auf meinem kleinen System schaut das so aus:

=== ZigBee Port Overview ===
Instance        Configured Port           Available by-id Ports               Status              
--------        ----------------          ----------------------------        ------              
zigbee.0        ...8-if00-port0           ...8-if00-port0                     ✓ Matching

bzw. im anderen Fall

=== ZigBee Port Overview ===
Instance        Configured Port           Available by-id Ports               Status              
--------        ----------------          ----------------------------        ------              
zigbee.0        /dev/ttyUSB0              ...8-if00-port0                     ✗ Not matching

Wäre schön das bei komplexeren Setups mit mehrern Instanzen, Controllern mit tcp-AAAnbindung usw. mal zu sehen.

Link zur aktuellen Skript-Version im ersten Posting.
Danke an die fleißigen Tester!

[Shadowhunter23]

Fehlt da nicht ein wget?

[Thomas Braun]

@Shadowhunter23

Oder ein curl...
Hab es ergänzt.

[Shadowhunter23]

Meine Zigbee Instanzen ( 5 an der Zahl ) werden so angezeigt:

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.                                                                                                                                  Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.                                                                                                                                  Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.                                                                                                                                  Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.                                                                                                                                  Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.                                                                                                                                  Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port           Available by-id Ports               Status
--------        ----------------          ----------------------------        ------

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Prima Hinweise!
Versuch jetzt nochmal. Hab den Code angepasst.

[Shadowhunter23]

Gerne:

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                Available by-id Ports                    Status
--------        ----------------               ----------------------------             ------
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.4        tcp://192.168.0.99:20108                                                TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108                                          TCP Connection
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         ...//192.168.0.99:20108                                                 ✗ Not matching
zigbee.         tcp://192.168.0.99:20108                                                TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Oh, das ist jetzt etwas zu ausführlich in der Ausgabe. Mal schauen wie ich das eingefangen bekomme...

[Thomas Braun]

@Shadowhunter23

Probier jetzt nochmal bitte.

[Shadowhunter23]

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                Available by-id Port           Status
--------        ----------------               ----------------------------   ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                              TCP Connection
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                              TCP Connection
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                              TCP Connection
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.4        tcp://192.168.0.99:20108       -                              TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                              TCP Connection
zigbee.         tcp://192.168.0.99:20108       -                              TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Und nochmal bitte einen Lauf... :-)

[Shadowhunter23]

Für dich als Info, zur Sicherheit lösche ich das Script vorher immer.

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.4        tcp://192.168.0.99:20108            -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.99:20108            -                                   TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23 sagte in iob diag - Skript:

zur Sicherheit lösche ich das Script vorher immer.

Brauchst du nicht.
curl überschreibt das Ziel immer mit dem aktuellen Inhalt.

Schau bitte jetzt nochmal.

[Shadowhunter23]

Wollte nur sicher gehen.

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.4        tcp://192.168.0.99:20108            -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.99:20108            -                                   TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

Auf meinem 'simpel'-System schaut es so aus:

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status              
--------        ----------------                    ----------------------------        ------              
zigbee.0        ...00_23_93_2C_A8-if00-port0        ...00_23_93_2C_A8-if00-port0        ✓ Matching

[Thomas Braun]

@Shadowhunter23

Und nochmal bitte...

Ziel ist solch ein Layout:

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        ...00_23_93_2C_A8-if00-port0         ...00_23_93_2C_A8-if00-port0         ✓ Matching
                                                ...00_23_93_2C_A8-if00-port2         ✗ Not matching
zigbee.1        /dev/ttyUSB0                        ...00_23_93_2C_A8-if00-port0         ✗ Not matching
                                                ...00_23_93_2C_A8-if00-port2         ✗ Not matching
zigbee.2        tcp://192.168.0.64:20108             -                                   TCP Connection

[Shadowhunter23]

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   TCP Connection
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   TCP Connection
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   TCP Connection
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.4        tcp://192.168.0.99:20108            -                                   TCP Connection
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   TCP Connection
zigbee.         tcp://192.168.0.99:20108            -                                   TCP Connection

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Deine 5 tcp-Verbindungen sind aber eine harte Nuss für mich... :-)
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...

Versuch nun nochmal, bitte.

[Shadowhunter23]

@Thomas-Braun sagte in iob diag - Skript:

Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...

Die Stabilität gibt mir für meinen Teil Recht auch wenn es 5 Instanzen sind.

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.4        tcp://192.168.0.99:20108            -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.99:20108            -                                   tcp

*** NodeJS-Installation ***

[Thomas Braun]

@Shadowhunter23

Bitte nochmal.

[Shadowhunter23]

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

No Devices found 'by-id'
*** ZigBee Settings ***

⚠ HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.3 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

⚠ HINT:
Your zigbee.4 COM-Port is NOT matching 'by-id'.
Please check your setting:
tcp

Zigbee Network Settings on your coordinator / in nvbackup are:

zigbee.X
\nExtended Pan ID:
\n*** MASKED ***
\nPan ID:
\n*** MASKED ***
\nChannel:
\n*** MASKED ***
\nNetwork Key:
\n*** MASKED ***

To unmask the settings run 'iob diag --unmask'

=== ZigBee Port Overview ===
Instance        Configured Port                     Available by-id Port                Status
--------        ----------------                    ----------------------------        ------
zigbee.0        tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108 -                                   tcp
zigbee.1        tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.69:20108
tcp://192.168.0.79:20108 -                                   tcp
zigbee.2        tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.79:20108
tcp://192.168.0.63:20108 -                                   tcp
zigbee.3        tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.4        tcp://192.168.0.99:20108            -                                   tcp
zigbee.         tcp://192.168.0.64:20108
tcp://192.168.0.69:20108
tcp://192.168.0.79:20108
tcp://192.168.0.63:20108
tcp://192.168.0.99:20108 -                                   tcp
zigbee.         tcp://192.168.0.99:20108            -                                   tcp

*** NodeJS-Installation ***