iob diag - Skript
ioBroker Allgemein
787
Beiträge
49
Kommentatoren
219.4k
Aufrufe
38
Watching
-
Meine Zigbee Instanzen ( 5 an der Zahl ) werden so angezeigt:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Ports Status -------- ---------------- ---------------------------- ------ *** NodeJS-Installation *** -
Meine Zigbee Instanzen ( 5 an der Zahl ) werden so angezeigt:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Ports Status -------- ---------------- ---------------------------- ------ *** NodeJS-Installation ***Prima Hinweise!
Versuch jetzt nochmal. Hab den Code angepasst. -
Gerne:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Ports Status -------- ---------------- ---------------------------- ------ zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.4 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.99:20108 TCP Connection *** NodeJS-Installation ***Proxmox 9 HA-Cluster mit 3x HP prodesk 400 G6 i5
Bei einem downvote bitte melden, es könnte sein, dass dieser ungewollt ist! -
Gerne:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Ports Status -------- ---------------- ---------------------------- ------ zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.4 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.99:20108 TCP Connection *** NodeJS-Installation ***Oh, das ist jetzt etwas zu ausführlich in der Ausgabe. Mal schauen wie ich das eingefangen bekomme...
-
Gerne:
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Ports Status -------- ---------------- ---------------------------- ------ zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee.4 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 TCP Connection zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. ...//192.168.0.99:20108 ✗ Not matching zigbee. tcp://192.168.0.99:20108 TCP Connection *** NodeJS-Installation ***Probier jetzt nochmal bitte.
-
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee.4 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.99:20108 - TCP Connection *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee.4 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.99:20108 - TCP Connection *** NodeJS-Installation ***Und nochmal bitte einen Lauf... :-)
-
Für dich als Info, zur Sicherheit lösche ich das Script vorher immer.
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee.4 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.99:20108 - TCP Connection *** NodeJS-Installation *** -
Für dich als Info, zur Sicherheit lösche ich das Script vorher immer.
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee.4 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.99:20108 - TCP Connection *** NodeJS-Installation ***@Shadowhunter23 sagte in iob diag - Skript:
zur Sicherheit lösche ich das Script vorher immer.
Brauchst du nicht.
curl überschreibt das Ziel immer mit dem aktuellen Inhalt.Schau bitte jetzt nochmal.
-
Wollte nur sicher gehen.
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee.4 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.99:20108 - TCP Connection *** NodeJS-Installation ***Proxmox 9 HA-Cluster mit 3x HP prodesk 400 G6 i5
Bei einem downvote bitte melden, es könnte sein, dass dieser ungewollt ist! -
@Shadowhunter23 sagte in iob diag - Skript:
zur Sicherheit lösche ich das Script vorher immer.
Brauchst du nicht.
curl überschreibt das Ziel immer mit dem aktuellen Inhalt.Schau bitte jetzt nochmal.
Auf meinem 'simpel'-System schaut es so aus:
=== ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 ...00_23_93_2C_A8-if00-port0 ...00_23_93_2C_A8-if00-port0 ✓ Matching -
Wollte nur sicher gehen.
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee.4 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.99:20108 - TCP Connection *** NodeJS-Installation ***Und nochmal bitte...
Ziel ist solch ein Layout:
=== ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 ...00_23_93_2C_A8-if00-port0 ...00_23_93_2C_A8-if00-port0 ✓ Matching ...00_23_93_2C_A8-if00-port2 ✗ Not matching zigbee.1 /dev/ttyUSB0 ...00_23_93_2C_A8-if00-port0 ✗ Not matching ...00_23_93_2C_A8-if00-port2 ✗ Not matching zigbee.2 tcp://192.168.0.64:20108 - TCP Connection -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee.4 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.99:20108 - TCP Connection *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - TCP Connection zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - TCP Connection zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - TCP Connection zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee.4 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - TCP Connection zigbee. tcp://192.168.0.99:20108 - TCP Connection *** NodeJS-Installation ***Deine 5 tcp-Verbindungen sind aber eine harte Nuss für mich... :-)
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...Versuch nun nochmal, bitte.
-
Deine 5 tcp-Verbindungen sind aber eine harte Nuss für mich... :-)
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...Versuch nun nochmal, bitte.
@Thomas-Braun sagte in iob diag - Skript:
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...
Die Stabilität gibt mir für meinen Teil Recht auch wenn es 5 Instanzen sind.
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
@Thomas-Braun sagte in iob diag - Skript:
Ist aber auch bestimmt mit das komplexeste Setup, das hier im Forum von jemandem verwendet wird...
Die Stabilität gibt mir für meinen Teil Recht auch wenn es 5 Instanzen sind.
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation ***Bitte nochmal.
-
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee. tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation *** -
USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** ⚠ HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.3 COM-Port is NOT matching 'by-id'. Please check your setting: tcp ⚠ HINT: Your zigbee.4 COM-Port is NOT matching 'by-id'. Please check your setting: tcp Zigbee Network Settings on your coordinator / in nvbackup are: zigbee.X \nExtended Pan ID: \n*** MASKED *** \nPan ID: \n*** MASKED *** \nChannel: \n*** MASKED *** \nNetwork Key: \n*** MASKED *** To unmask the settings run 'iob diag --unmask' === ZigBee Port Overview === Instance Configured Port Available by-id Port Status -------- ---------------- ---------------------------- ------ zigbee.0 tcp://192.168.0.64:20108 tcp://192.168.0.69:20108 - tcp zigbee.1 tcp://192.168.0.69:20108 tcp://192.168.0.79:20108 - tcp zigbee.2 tcp://192.168.0.79:20108 tcp://192.168.0.63:20108 - tcp zigbee.3 tcp://192.168.0.63:20108 tcp://192.168.0.99:20108 - tcp zigbee.4 tcp://192.168.0.99:20108 - tcp *** NodeJS-Installation ***Das schaut doch schon fast aus wie gewünscht...
Bitte jetzt nochmal laufen lassen.Ich brauch übrigens nur den Part ab
=== ZigBee Port Overview ===Der Code davor wird nicht geändert.
579
Online32.7k
Benutzer82.5k
Themen1.3m
Beiträge