wichtiges UPDATE für controller 7.2.2 im stable

[Rene_HM]

@Qlink sagte:

Kannst du mir sagen ob ich bei den Adapter Settings wo einen Fehler habe ?

Kommt darauf an, was du erreichen willst. Wenn du zunächst nur den aktuellen Verbrauch im Portal sehen willst, müssen wir uns nur Status und aktuelle Leistung anschauen. In den meisten Fällen wird der Status (also an oder aus) nicht richtig übertagen. Das sieht man aber schön im debug-log. Ich würde die Tabell ganz unten speziell mit DeviceOIDCounter und DeviceOIDStatus ausfüllen...

Wenn du später die wallbox auch vom Portal gesteuert haben willst, musst du DeviceOIDPlugConnected und DeviceOIDChargePower in der Tabelle ausfüllen.

[Qlink]

@rene_hm

Ich habe nun folgende Felder ausgefüllt:

Leider werden immer noch keine Daten ins Sunnyportal übertragen.
Ich finde aber den Fehler nicht...

Kannst du mir sagen wofür DeviceOIDStatus gedacht ist ?
Ich fürchte dafür bekomme ich keinen passenden DP vom Adapter geliefert...

Nebeneffekt, seit ich diese Felder befüllt habe:

Der Adapter spammt mir nun alle 15 Sekunden das Log voll:

Hab ich etwas falsch ausgefüllt, oder kann ich das wo im Adapter anpassen, oder lässt sich das nur über die Logstufe regeln ?

[Rene_HM]

@Qlink schalte doch mal auf den debug-log-Mode und schicke mir das log. Wir sehen dort, was an den SHM geschickt wird. Ich denke, der Status (also an oder aus) wird nicht richtig erkannt.

Das info-log sollte eigentlich nur bei Änderung ausgeloggt werden, das muss ich mir anschauen...

[Qlink]

@rene_hm wenn ich im Adapter unter Haupteinstellungen "erweiterte Protokollierung" aktiviere, dann ändert sich das Logverhalten relativ wenig.

Hier das Log:

semp.0 2026-06-24 17:51:00.697	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
semp.0 2026-06-24 17:50:56.699	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
kecontact.0 2026-06-24 17:50:46.013	info	stop charging
semp.0 2026-06-24 17:50:45.689	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:50:30.690	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
kecontact.0 2026-06-24 17:50:16.006	info	(re)start charging with 6500mA
semp.0 2026-06-24 17:50:15.689	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
semp.0 2026-06-24 17:50:00.689	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
web.1 2026-06-24 17:49:59.993	info	<== Disconnect system.user.admin from ::ffff:192.168.6.251 iqontrol.0
semp.0 2026-06-24 17:49:56.459	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
web.1 2026-06-24 17:49:51.709	info	==> Connected system.user.admin from ::ffff:192.168.6.251
kecontact.0 2026-06-24 17:49:46.020	info	stop charging
semp.0 2026-06-24 17:49:45.689	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:49:30.687	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:49:00.690	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:48:56.144	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
kecontact.0 2026-06-24 17:48:46.013	info	minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: Wed Jun 24 2026 17:47:46 GMT+0200 (Mitteleuropäische Sommerzeit)
semp.0 2026-06-24 17:48:45.686	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:48:30.689	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
javascript.0 2026-06-24 17:48:23.002	info	script.js.Beschattung.Sonnenstandsberechnung: Sonne: Azimut: 272° / Sonne: Elevation: 30° / Mond: Azimut: 134° / Mond: Elevation: 12.6°
kecontact.0 2026-06-24 17:48:16.017	info	minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: Wed Jun 24 2026 17:47:46 GMT+0200 (Mitteleuropäische Sommerzeit)
semp.0 2026-06-24 17:48:15.687	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:48:00.688	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:47:55.838	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
kecontact.0 2026-06-24 17:47:46.008	info	minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: null
semp.0 2026-06-24 17:47:45.685	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:47:30.686	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
javascript.0 2026-06-24 17:47:23.009	info	script.js.Beschattung.rolax-schatten-wig-pgm: Beschattung Osten falsch!
kecontact.0 2026-06-24 17:47:16.002	info	regulate wallbox from 7000 to 6000mA
semp.0 2026-06-24 17:47:15.686	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:47:00.685	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:46:55.558	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
kecontact.0 2026-06-24 17:46:46.005	info	regulate wallbox from 7500 to 7000mA
semp.0 2026-06-24 17:46:45.687	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:46:30.685	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-24 17:46:15.717	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true

Was mir aufgefallen ist:
Unter Objekte sind sämtliche DPs vom Adapter leer:

Ist das normal ?

Beste Grüße

[Rene_HM]

@Qlink sagte:

erweiterte Protokollierung

Ich meine nicht die "erweiterte Protokollierung" im Adapter sondern das log-level des Adapters. Das bitte auf debug stellen...
Kommen irgendwelche Fehlermeldungen des Adapters, wenn er neu gestartet wird? Alle Datenpunkte sollten eigentlich nicht komplett leer sein...

[Qlink]

@rene_hm

Alles klar. Hab ich entsprechend umgestellt.
Nein, es kommen keine Fehlermeldungen des Adapters.
Auch auf debug schaut das log nicht großartig anders aus (für mich):

semp.0 2026-06-25 17:45:47.817	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:45:32.818	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:45:17.814	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:45:02.816	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:44:55.655	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
semp.0 2026-06-25 17:44:47.813	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:44:32.810	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
javascript.0 2026-06-25 17:44:23.005	info	script.js.Beschattung.Sonnenstandsberechnung: Sonne: Azimut: 272° / Sonne: Elevation: 30.6° / Mond: Azimut: 127° / Mond: Elevation: 3°
semp.0 2026-06-25 17:44:17.812	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:44:02.812	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:43:55.377	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
semp.0 2026-06-25 17:43:47.811	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:43:32.811	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:43:19.936	info	SempServer: adapter discovered by SHM
semp.0 2026-06-25 17:43:17.817	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:43:16.950	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0 2026-06-25 17:43:16.905	info	Keba KeContact P30X: device created F-00000000-000000000001-00 Keba KeContact P30X
semp.0 2026-06-25 17:43:16.871	info	starting. Version 2.0.12 in /opt/iobroker/node_modules/iobroker.semp, node: v22.21.0, js-controller: 7.2.2
host.iobroker 2026-06-25 17:43:14.067	info	instance system.adapter.semp.0 in version "2.0.12" started with pid 21269
host.iobroker 2026-06-25 17:43:10.715	info	instance system.adapter.semp.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
semp.0 2026-06-25 17:43:10.558	info	terminating
semp.0 2026-06-25 17:43:10.558	info	terminating
admin.0 2026-06-25 17:43:10.281	info	<== Disconnect system.user.admin from ::ffff:192.168.30.222 semp
semp.0 2026-06-25 17:43:10.063	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
semp.0 2026-06-25 17:43:10.062	debug	Plugin sentry destroyed
semp.0 2026-06-25 17:43:10.061	info	terminating
semp.0 2026-06-25 17:43:10.060	debug	Gateway: gateway stopped...
semp.0 2026-06-25 17:43:10.060	debug	Gateway: SSDPServer stopped
semp.0 2026-06-25 17:43:10.057	debug	SempServer: SEMP server stopped
semp.0 2026-06-25 17:43:10.057	debug	Gateway: delete all devices
semp.0 2026-06-25 17:43:10.056	info	Got terminate signal TERMINATE_YOURSELF
host.iobroker 2026-06-25 17:43:10.056	info	stopInstance system.adapter.semp.0 send kill signal
host.iobroker 2026-06-25 17:43:10.052	info	stopInstance system.adapter.semp.0 (force=false, process=true)
semp.0 2026-06-25 17:43:07.392	debug	SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root>
semp.0 2026-06-25 17:43:07.391	debug	SempServer: SHM requested description
semp.0 2026-06-25 17:43:07.357	debug	SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root>

semp.0 2026-06-25 17:43:07.357	debug	SempServer: SHM requested description
semp.0 2026-06-25 17:43:07.332	debug	SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root>

semp.0 2026-06-25 17:43:07.331	debug	SempServer: SHM requested description
admin.0 2026-06-25 17:43:07.074	info	==> Connected system.user.admin from ::ffff:192.168.30.222
semp.0 2026-06-25 17:43:04.364	info	Loglevel changed from "info" to "debug"

[Rene_HM]

@Qlink sagte:

Auch auf debug schaut das log nicht großartig anders aus (für mich):

Der Adapter steht nicht wirklich auf debug. Der ist kurz auf debug, dann startest du den Adapter neu und er steht wieder auf info.

Du kannst auch http://xx.xx.xx.xx:9765/semp mit xx.xx.xx.xx als deine IP des iobroker Gateways (also nicht SHM) im Browser eingeben. Dann zeigt dein Browser an, was der SHM normalerweise als XML bekommen würde ...

[Qlink]

@rene_hm

Alles klar.
Hab nochmal auf debug umgestellt jetzt steht schon mehr im log:

semp.0
2026-06-29 21:22:08.246	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:22:08.245	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:22:08.243	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:22:08.243	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:22:08.238	debug	Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
semp.0
2026-06-29 21:22:08.238	debug	Keba KeContact P30X: status detection time limit is 1 going to off
semp.0
2026-06-29 21:22:08.238	debug	Keba KeContact P30X: set status detection limit to 500
semp.0
2026-06-29 21:22:08.236	debug	Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
semp.0
2026-06-29 21:22:08.236	debug	Keba KeContact P30X: status detection time limit is 1 going to off
semp.0
2026-06-29 21:22:08.236	debug	Keba KeContact P30X: set status detection limit to 500
semp.0
2026-06-29 21:22:08.229	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:22:08.229	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:22:08.214	debug	Keba KeContact P30X: set new charge power 0 number
semp.0
2026-06-29 21:22:08.213	debug	planning request: got energy used 0
semp.0
2026-06-29 21:22:08.213	debug	Keba KeContact P30X: calc energy 0 1782760928211 = 0Wh
semp.0
2026-06-29 21:22:08.212	debug	Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
semp.0
2026-06-29 21:22:08.212	debug	planning request: got energy used 0
semp.0
2026-06-29 21:22:08.212	debug	Keba KeContact P30X: calc energy 0 1782760913215 = 0Wh
semp.0
2026-06-29 21:22:08.211	debug	Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
semp.0
2026-06-29 21:22:08.209	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:22:08.209	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:22:08.202	debug	Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
semp.0
2026-06-29 21:22:08.202	debug	Keba KeContact P30X: new recommendation power 0 number
semp.0
2026-06-29 21:22:08.202	debug	Keba KeContact P30X: wallbox charging false
semp.0
2026-06-29 21:22:08.202	debug	Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
semp.0
2026-06-29 21:22:08.201	debug	Keba KeContact P30X: no switch configured
semp.0
2026-06-29 21:22:08.201	debug	Keba KeContact P30X: disconnect - timer fired
semp.0
2026-06-29 21:22:08.201	debug	planning request: Planningrequest all timeframes canceled
semp.0
2026-06-29 21:22:08.201	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
semp.0
2026-06-29 21:22:08.200	debug	Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
semp.0
2026-06-29 21:22:08.196	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:22:08.196	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:22:08.193	debug	Keba KeContact P30X: wallbox error true
semp.0
2026-06-29 21:22:08.193	debug	Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
semp.0
2026-06-29 21:21:56.663	debug	SempServer: response sent
semp.0
2026-06-29 21:21:56.661	debug	SempServer: response xml <?xml version="1.0" encoding="utf-8"?> <Device2EM xmlns="http://www.sma.de/communication/schema/SEMP/v1"> <DeviceInfo> <Identification> <DeviceId>F-00000000-000000000001-00</DeviceId> <DeviceName>Keba KeContact P30X</DeviceName> <DeviceType>EVCharger</DeviceType> <DeviceSerial>20296767</DeviceSerial> <DeviceVendor>Keba</DeviceVendor> </Identification> <Characteristics> <MaxPowerConsumption>11000</MaxPowerConsumption> <MinPowerConsumption>6000</MinPowerConsumption> </Characteristics> <Capabilities> <CurrentPower> <Method>Measurement</Method> </CurrentPower> <Timestamps> <AbsoluteTimestamps>false</AbsoluteTimestamps> </Timestamps> <Interruptions> <InterruptionsAllowed>false</InterruptionsAllowed> </Interruptions> <Requests> <OptionalEnergy>true</OptionalEnergy> </Requests> </Capabilities> </DeviceInfo> <DeviceStatus> <DeviceId>F-00000000-000000000001-00</DeviceId> <EMSignalsAccepted>false</EMSignalsAccepted> <Status>Off</Status> <PowerConsumption> <PowerInfo> <AveragePower>0</AveragePower> <Timestamp>0</Timestamp> <AveragingInterval>60</AveragingInterval> </PowerInfo> </PowerConsumption> </DeviceStatus> </Device2EM>
semp.0
2026-06-29 21:21:56.658	debug	planning request: planningrequest data []
semp.0
2026-06-29 21:21:56.658	debug	Keba KeContact P30X: no switch configured
semp.0
2026-06-29 21:21:56.658	debug	Keba KeContact P30X: turn device off
semp.0
2026-06-29 21:21:56.658	debug	planning request: Planningrequest Check2Switch {"SwitchOff":true,"restart":false}
semp.0
2026-06-29 21:21:56.657	debug	Gateway: get all devices
semp.0
2026-06-29 21:21:56.656	debug	SempServer: SHM requested all devices. /semp/ ::ffff:192.168.30.2 http
yamaha.0
2026-06-29 21:21:55.770	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
yamaha.0
2026-06-29 21:21:55.311	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
yamaha.0
2026-06-29 21:21:54.687	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
yamaha.0
2026-06-29 21:21:54.335	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
semp.0
2026-06-29 21:21:53.233	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:53.232	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:53.231	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:53.231	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:53.227	debug	Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
semp.0
2026-06-29 21:21:53.226	debug	Keba KeContact P30X: status detection time limit is 1 going to off
semp.0
2026-06-29 21:21:53.226	debug	Keba KeContact P30X: set status detection limit to 500
semp.0
2026-06-29 21:21:53.225	debug	Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
semp.0
2026-06-29 21:21:53.225	debug	Keba KeContact P30X: status detection time limit is 1 going to off
semp.0
2026-06-29 21:21:53.224	debug	Keba KeContact P30X: set status detection limit to 500
semp.0
2026-06-29 21:21:53.219	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:53.219	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:53.215	debug	planning request: got energy used 0
semp.0
2026-06-29 21:21:53.215	debug	Keba KeContact P30X: calc energy 0 1782760913214 = 0Wh
semp.0
2026-06-29 21:21:53.215	debug	Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
semp.0
2026-06-29 21:21:53.214	debug	planning request: got energy used 0
semp.0
2026-06-29 21:21:53.214	debug	Keba KeContact P30X: calc energy 0 1782760898217 = 0Wh
semp.0
2026-06-29 21:21:53.214	debug	Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
semp.0
2026-06-29 21:21:53.211	debug	Keba KeContact P30X: set new charge power 0 number
semp.0
2026-06-29 21:21:53.210	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:53.210	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
yamaha.0
2026-06-29 21:21:53.207	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
semp.0
2026-06-29 21:21:53.203	debug	Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
semp.0
2026-06-29 21:21:53.203	debug	Keba KeContact P30X: new recommendation power 0 number
semp.0
2026-06-29 21:21:53.203	debug	Keba KeContact P30X: wallbox charging false
semp.0
2026-06-29 21:21:53.203	debug	Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
semp.0
2026-06-29 21:21:53.203	debug	Keba KeContact P30X: no switch configured
semp.0
2026-06-29 21:21:53.202	debug	Keba KeContact P30X: disconnect - timer fired
semp.0
2026-06-29 21:21:53.202	debug	planning request: Planningrequest all timeframes canceled
semp.0
2026-06-29 21:21:53.202	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
semp.0
2026-06-29 21:21:53.202	debug	Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
semp.0
2026-06-29 21:21:53.198	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:53.196	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:53.193	debug	Keba KeContact P30X: wallbox error true
semp.0
2026-06-29 21:21:53.192	debug	Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
semp.0
2026-06-29 21:21:52.984	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.966	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.949	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.928	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.879	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.863	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.823	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.808	debug	SempServer: SHM requested description
yamaha.0
2026-06-29 21:21:52.800	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
semp.0
2026-06-29 21:21:52.793	debug	SempServer: SHM requested description
yamaha.0
2026-06-29 21:21:52.358	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
semp.0
2026-06-29 21:21:52.169	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.120	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:52.103	debug	SempServer: SHM requested description
yamaha.0
2026-06-29 21:21:51.986	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
yamaha.0
2026-06-29 21:21:51.650	info	State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string"
semp.0
2026-06-29 21:21:38.238	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:38.238	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:38.235	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:38.235	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:38.231	debug	Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
semp.0
2026-06-29 21:21:38.231	debug	Keba KeContact P30X: status detection time limit is 1 going to off
semp.0
2026-06-29 21:21:38.230	debug	Keba KeContact P30X: set status detection limit to 500
semp.0
2026-06-29 21:21:38.229	debug	Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
semp.0
2026-06-29 21:21:38.228	debug	Keba KeContact P30X: status detection time limit is 1 going to off
semp.0
2026-06-29 21:21:38.228	debug	Keba KeContact P30X: set status detection limit to 500
semp.0
2026-06-29 21:21:38.223	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:38.223	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:38.218	debug	planning request: got energy used 0
semp.0
2026-06-29 21:21:38.217	debug	Keba KeContact P30X: calc energy 0 1782760898215 = 0Wh
semp.0
2026-06-29 21:21:38.217	debug	Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
semp.0
2026-06-29 21:21:38.217	debug	planning request: got energy used 0
semp.0
2026-06-29 21:21:38.215	debug	Keba KeContact P30X: calc energy 0 1782760892188 = 0Wh
semp.0
2026-06-29 21:21:38.214	debug	Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
semp.0
2026-06-29 21:21:38.212	debug	Keba KeContact P30X: set new charge power 0 number
semp.0
2026-06-29 21:21:38.209	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:38.209	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:38.204	debug	Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
semp.0
2026-06-29 21:21:38.203	debug	Keba KeContact P30X: new recommendation power 0 number
semp.0
2026-06-29 21:21:38.203	debug	Keba KeContact P30X: wallbox charging false
semp.0
2026-06-29 21:21:38.202	debug	Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
semp.0
2026-06-29 21:21:38.202	debug	Keba KeContact P30X: no switch configured
semp.0
2026-06-29 21:21:38.201	debug	Keba KeContact P30X: disconnect - timer fired
semp.0
2026-06-29 21:21:38.201	debug	planning request: Planningrequest all timeframes canceled
semp.0
2026-06-29 21:21:38.201	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
semp.0
2026-06-29 21:21:38.200	debug	Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
semp.0
2026-06-29 21:21:38.198	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:38.197	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:38.194	debug	Keba KeContact P30X: wallbox error true
semp.0
2026-06-29 21:21:38.193	debug	Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
semp.0
2026-06-29 21:21:35.197	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:35.181	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:35.126	info	SempServer: adapter discovered by SHM
semp.0
2026-06-29 21:21:35.126	debug	SempServer: SHM requested description
semp.0
2026-06-29 21:21:32.204	debug	result [{"ID":"F-00000000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false,"WallboxOID":{"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"}},"OptionalEnergy":true}]
semp.0
2026-06-29 21:21:32.203	debug	device {"ID":"F-00000000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false,"WallboxOID":{"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"}},"OptionalEnergy":true}
semp.0
2026-06-29 21:21:32.203	debug	UpdateData
semp.0
2026-06-29 21:21:32.203	debug	Gateway: set device
semp.0
2026-06-29 21:21:32.203	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:32.202	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:32.200	debug	planning request: planningrequest set minEnergy 0
semp.0
2026-06-29 21:21:32.195	debug	Keba KeContact P30X: subscribe Devices.Keba KeContact P30X.MaxEnergy
semp.0
2026-06-29 21:21:32.193	debug	Keba KeContact P30X: subscribe Devices.Keba KeContact P30X.MinEnergy
semp.0
2026-06-29 21:21:32.193	debug	Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
semp.0
2026-06-29 21:21:32.192	debug	Keba KeContact P30X: status detection time limit is 1 going to off
semp.0
2026-06-29 21:21:32.192	debug	Keba KeContact P30X: set status detection limit to 500
semp.0
2026-06-29 21:21:32.189	debug	planning request: got energy used 0
semp.0
2026-06-29 21:21:32.188	debug	Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
semp.0
2026-06-29 21:21:32.185	debug	Keba KeContact P30X: subscribe OID_Counter 0_userdata.0.Stromversorgung.Wallbox-PowerW
semp.0
2026-06-29 21:21:32.185	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:32.184	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:32.182	debug	Keba KeContact P30X: wallbox error true
semp.0
2026-06-29 21:21:32.182	debug	Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
semp.0
2026-06-29 21:21:32.179	debug	Keba KeContact P30X: subscribe OID_IsError kecontact.0.error1
semp.0
2026-06-29 21:21:32.179	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:32.179	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:32.177	debug	Keba KeContact P30X: wallbox charging false
semp.0
2026-06-29 21:21:32.176	debug	Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
semp.0
2026-06-29 21:21:32.174	debug	Keba KeContact P30X: subscribe OID_IsCharging 0_userdata.0.Stromversorgung.Wallbox-Plug
semp.0
2026-06-29 21:21:32.174	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:32.173	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:32.171	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:32.171	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:32.166	debug	Keba KeContact P30X: in SetState, no new state to set, is plug not connected
semp.0
2026-06-29 21:21:32.165	debug	Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State
semp.0
2026-06-29 21:21:32.164	debug	Keba KeContact P30X: set new charge power 0 number
semp.0
2026-06-29 21:21:32.158	debug	Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
semp.0
2026-06-29 21:21:32.158	debug	Keba KeContact P30X: new recommendation power 0 number
semp.0
2026-06-29 21:21:32.157	debug	Keba KeContact P30X: no switch configured
semp.0
2026-06-29 21:21:32.157	debug	Keba KeContact P30X: disconnect - timer fired
semp.0
2026-06-29 21:21:32.157	debug	planning request: Planningrequest all timeframes canceled
semp.0
2026-06-29 21:21:32.156	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
semp.0
2026-06-29 21:21:32.156	debug	Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
semp.0
2026-06-29 21:21:32.151	debug	Keba KeContact P30X: subscribe OID_PlugConnected 0_userdata.0.Stromversorgung.Wallbox-Plug
semp.0
2026-06-29 21:21:32.106	info	Keba KeContact P30X: device created F-00000000-000000000001-00 Keba KeContact P30X
semp.0
2026-06-29 21:21:32.105	debug	Keba KeContact P30X: wallbox OID configuration (2) {"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"}}
semp.0
2026-06-29 21:21:32.105	debug	Keba KeContact P30X: wallbox OID configuration (1) [{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}] [{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}]
semp.0
2026-06-29 21:21:32.105	debug	Keba KeContact P30X: can use optional energy: true
semp.0
2026-06-29 21:21:32.105	debug	Keba KeContact P30X: BaseId 00000000 length 8
semp.0
2026-06-29 21:21:32.104	debug	Keba KeContact P30X: check DeviceID F-00000000-000000000001-00 type string
semp.0
2026-06-29 21:21:32.104	debug	planning request: planningrequest constructor {"DeviceName":"Keba KeContact P30X","DeviceType":"EVCharger","MaxEnergy":82000,"MinEnergy":8200,"MinPower":6000,"MaxPower":11000,"WallboxChargeTime":"3","DishwasherMode":false,"Type":"EVCharger","Name":"Keba KeContact P30X"}
semp.0
2026-06-29 21:21:32.104	debug	planning request: instance created
semp.0
2026-06-29 21:21:32.103	debug	Keba KeContact P30X: instance created
semp.0
2026-06-29 21:21:32.102	debug	Gateway: add device F-00000000-000000000001-00
semp.0
2026-06-29 21:21:32.102	debug	add device {"ID":"F-00000000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false}
semp.0
2026-06-29 21:21:32.101	debug	Started all!
semp.0
2026-06-29 21:21:32.101	debug	Gateway: gateway started...
semp.0
2026-06-29 21:21:32.100	debug	Gateway: SSDPServer started
semp.0
2026-06-29 21:21:32.086	debug	SempServer: SEMP server listening on 9765
semp.0
2026-06-29 21:21:32.083	debug	Gateway: gateway created...
semp.0
2026-06-29 21:21:32.083	debug	SempServer: SEMPServer created
semp.0
2026-06-29 21:21:32.076	debug	SempServer: instance created
semp.0
2026-06-29 21:21:32.076	debug	Gateway: SSDPServer created: http://192.168.30.90:9765/description.xml F-00000000-000000000001-00
semp.0
2026-06-29 21:21:32.075	debug	SSDPServer: instance created
semp.0
2026-06-29 21:21:32.075	debug	Gateway: instance created
semp.0
2026-06-29 21:21:32.075	debug	BaseID: valid 8-digit number
semp.0
2026-06-29 21:21:32.074	debug	check BaseID 30380000 type string
semp.0
2026-06-29 21:21:32.074	debug	check BaseID 30380000 type string
semp.0
2026-06-29 21:21:32.074	debug	{"IPAddress":"192.168.30.90","UUID":"F-00000000-000000000001-00","SempPort":9765,"SempName":"ioBroker Gateway","SempManufacturer":"ioBroker","DeviceBaseID":"30380000","extendedLog":false,"LogToCSV":false,"LogToCSVPath":"/home/pi/semp.csv","devices":[{"ID":"F-00000000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false}],"deviceSelector":"F-00000000-000000000001-00"}
semp.0
2026-06-29 21:21:32.063	info	starting. Version 2.0.12 in /opt/iobroker/node_modules/iobroker.semp, node: v22.21.0, js-controller: 7.2.2
semp.0
2026-06-29 21:21:30.701	debug	Plugin sentry Initialize Plugin (enabled=true)
semp.0
2026-06-29 21:21:30.662	debug	States connected to redis: redis:6379
semp.0
2026-06-29 21:21:30.656	debug	States create User PubSub Client
semp.0
2026-06-29 21:21:30.655	debug	States create System PubSub Client
semp.0
2026-06-29 21:21:30.643	debug	Redis States: Use Redis connection: redis:6379
semp.0
2026-06-29 21:21:30.633	debug	Objects connected to redis: 172.18.0.5:6379
semp.0
2026-06-29 21:21:30.629	debug	Objects client initialize lua scripts
semp.0
2026-06-29 21:21:30.460	debug	Objects create User PubSub Client
semp.0
2026-06-29 21:21:30.459	debug	Objects create System PubSub Client
semp.0
2026-06-29 21:21:30.457	debug	Objects client ready ... initialize now
semp.0
2026-06-29 21:21:30.440	debug	Redis Objects: Use Redis connection: 172.18.0.5:6379

und hier noch der output von der URL:

F-00000000-000000000001-00 Keba KeContact P30X EVCharger 20296767 Keba 11000 6000 Measurement false false true F-00000000-000000000001-00 false Off 0 0 60

[Rene_HM]

@Qlink Ich denke, mit der DeviceID = F-00000000-000000000001-00 wird das nicht funktionieren. Mindestens der erste Block nach dem F- sollte mit einer BaseID gefüllt werden (entweder mit der vom Adapter angezeigten oder einer eigenen) Die DeviceID muss bei SMA unique sein...

[Qlink]

@rene_hm

ich hab die DeviceID nun angepasst, hat aber leider am Verhalten nichts geändert:

semp.0
2026-07-02 15:12:05.273	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0
2026-07-02 15:11:56.482	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
semp.0
2026-07-02 15:11:50.272	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
admin.0
2026-07-02 15:11:36.281	info	==> Connected system.user.admin from ::ffff:192.168.30.57
semp.0
2026-07-02 15:11:35.300	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0
2026-07-02 15:11:20.268	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0
2026-07-02 15:11:05.268	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0
2026-07-02 15:10:56.297	info	State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string"
semp.0
2026-07-02 15:10:50.270	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0
2026-07-02 15:10:35.271	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0
2026-07-02 15:10:20.271	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0
2026-07-02 15:10:16.693	info	SempServer: adapter discovered by SHM
semp.0
2026-07-02 15:10:13.718	info	Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true
semp.0
2026-07-02 15:10:13.670	info	Keba KeContact P30X: device created F-30380000-000000000001-00 Keba KeContact P30X
semp.0
2026-07-02 15:10:13.623	info	starting. Version 2.0.12 in /opt/iobroker/node_modules/iobroker.semp, node: v22.21.0, js-controller: 7.2.2

[Rene_HM]

@Qlink sagte:

ich hab die DeviceID nun angepasst, hat aber leider am Verhalten nichts geändert:

ja und gleichzeitig wieder debug abgeschaltet...

schon mal die logs auf dem SHM selbst angeschaut?

https://github.com/rg-engineering/ioBroker.semp/blob/master/docu/connection_assist/connection_assist_de.md

[Qlink]

@rene_hm

Hier nochmal der Log Output mit debug aktiviert:

Spoiler

2026-07-05 20:11:29.145 - info: semp.0 (9778) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:11:44.148 - info: semp.0 (9778) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:11:59.149 - info: semp.0 (9778) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:12:14.147 - info: semp.0 (9778) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:12:23.004 - info: javascript.0 (568) script.js.Beschattung.Sonnenstandsberechnung: Sonne: Azimut: 297° / Sonne: Elevation: 6.9° / Mond: Azimut: 51° / Mond: Elevation: -31.6°
2026-07-05 20:12:29.147 - info: semp.0 (9778) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:12:44.149 - info: semp.0 (9778) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:12:48.182 - info: web.1 (1782) <== Disconnect system.user.admin from ::ffff:192.168.30.237
2026-07-05 20:12:49.178 - info: web.1 (1782) ==> Connected system.user.admin from ::ffff:192.168.30.237
2026-07-05 20:12:51.288 - info: host.iobroker stopInstance system.adapter.semp.0 (force=false, process=true)
2026-07-05 20:12:51.293 - info: host.iobroker stopInstance system.adapter.semp.0 send kill signal
2026-07-05 20:12:51.293 - info: semp.0 (9778) Got terminate signal TERMINATE_YOURSELF
2026-07-05 20:12:51.297 - info: semp.0 (9778) terminating
2026-07-05 20:12:51.299 - info: semp.0 (9778) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2026-07-05 20:12:51.795 - info: semp.0 (9778) terminating
2026-07-05 20:12:51.796 - info: semp.0 (9778) terminating
2026-07-05 20:12:51.974 - info: host.iobroker instance system.adapter.semp.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2026-07-05 20:12:55.239 - info: host.iobroker instance system.adapter.semp.0 in version "2.0.12" started with pid 29126
2026-07-05 20:12:56.272 - debug: semp.0 (29126) Redis Objects: Use Redis connection: 172.18.0.5:6379
2026-07-05 20:12:56.290 - debug: semp.0 (29126) Objects client ready ... initialize now
2026-07-05 20:12:56.291 - debug: semp.0 (29126) Objects create System PubSub Client
2026-07-05 20:12:56.292 - debug: semp.0 (29126) Objects create User PubSub Client
2026-07-05 20:12:56.466 - debug: semp.0 (29126) Objects client initialize lua scripts
2026-07-05 20:12:56.470 - debug: semp.0 (29126) Objects connected to redis: 172.18.0.5:6379
2026-07-05 20:12:56.480 - debug: semp.0 (29126) Redis States: Use Redis connection: redis:6379
2026-07-05 20:12:56.494 - debug: semp.0 (29126) States create System PubSub Client
2026-07-05 20:12:56.495 - debug: semp.0 (29126) States create User PubSub Client
2026-07-05 20:12:56.501 - debug: semp.0 (29126) States connected to redis: redis:6379
2026-07-05 20:12:56.547 - debug: semp.0 (29126) Plugin sentry Initialize Plugin (enabled=true)
2026-07-05 20:12:58.081 - info: semp.0 (29126) starting. Version 2.0.12 in /opt/iobroker/node_modules/iobroker.semp, node: v22.21.0, js-controller: 7.2.2
2026-07-05 20:12:58.093 - debug: semp.0 (29126) {"IPAddress":"192.168.30.90","UUID":"F-00000000-000000000001-00","SempPort":9765,"SempName":"ioBroker Gateway","SempManufacturer":"ioBroker","DeviceBaseID":"30380000","extendedLog":false,"LogToCSV":false,"LogToCSVPath":"/home/pi/semp.csv","devices":[{"ID":"F-30380000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false}],"deviceSelector":"F-30380000-000000000001-00"}
2026-07-05 20:12:58.093 - debug: semp.0 (29126) check BaseID 30380000 type string
2026-07-05 20:12:58.093 - debug: semp.0 (29126) check BaseID 30380000 type string
2026-07-05 20:12:58.093 - debug: semp.0 (29126) BaseID: valid 8-digit number
2026-07-05 20:12:58.093 - debug: semp.0 (29126) Gateway: instance created
2026-07-05 20:12:58.094 - debug: semp.0 (29126) SSDPServer: instance created
2026-07-05 20:12:58.095 - debug: semp.0 (29126) Gateway: SSDPServer created: http://192.168.30.90:9765/description.xml F-00000000-000000000001-00
2026-07-05 20:12:58.095 - debug: semp.0 (29126) SempServer: instance created
2026-07-05 20:12:58.100 - debug: semp.0 (29126) SempServer: SEMPServer created
2026-07-05 20:12:58.100 - debug: semp.0 (29126) Gateway: gateway created...
2026-07-05 20:12:58.104 - debug: semp.0 (29126) SempServer: SEMP server listening on 9765
2026-07-05 20:12:58.118 - debug: semp.0 (29126) Gateway: SSDPServer started
2026-07-05 20:12:58.118 - debug: semp.0 (29126) Gateway: gateway started...
2026-07-05 20:12:58.119 - debug: semp.0 (29126) Started all!
2026-07-05 20:12:58.119 - debug: semp.0 (29126) add device {"ID":"F-30380000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false}
2026-07-05 20:12:58.119 - debug: semp.0 (29126) Gateway: add device F-30380000-000000000001-00
2026-07-05 20:12:58.120 - debug: semp.0 (29126) Keba KeContact P30X: instance created
2026-07-05 20:12:58.121 - debug: semp.0 (29126) planning request: instance created
2026-07-05 20:12:58.121 - debug: semp.0 (29126) planning request: planningrequest constructor {"DeviceName":"Keba KeContact P30X","DeviceType":"EVCharger","MaxEnergy":82000,"MinEnergy":8200,"MinPower":6000,"MaxPower":11000,"WallboxChargeTime":"3","DishwasherMode":false,"Type":"EVCharger","Name":"Keba KeContact P30X"}
2026-07-05 20:12:58.121 - debug: semp.0 (29126) Keba KeContact P30X: check DeviceID F-30380000-000000000001-00 type string
2026-07-05 20:12:58.121 - debug: semp.0 (29126) Keba KeContact P30X: BaseId 30380000 length 8
2026-07-05 20:12:58.121 - debug: semp.0 (29126) Keba KeContact P30X: can use optional energy: true
2026-07-05 20:12:58.121 - debug: semp.0 (29126) Keba KeContact P30X: wallbox OID configuration (1) [{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}] [{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}]
2026-07-05 20:12:58.122 - debug: semp.0 (29126) Keba KeContact P30X: wallbox OID configuration (2) {"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"}}
2026-07-05 20:12:58.122 - info: semp.0 (29126) Keba KeContact P30X: device created F-30380000-000000000001-00 Keba KeContact P30X
2026-07-05 20:12:58.167 - debug: semp.0 (29126) Keba KeContact P30X: subscribe OID_PlugConnected 0_userdata.0.Stromversorgung.Wallbox-Plug
2026-07-05 20:12:58.171 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
2026-07-05 20:12:58.171 - info: semp.0 (29126) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:12:58.172 - debug: semp.0 (29126) planning request: Planningrequest all timeframes canceled
2026-07-05 20:12:58.172 - debug: semp.0 (29126) Keba KeContact P30X: disconnect - timer fired
2026-07-05 20:12:58.172 - debug: semp.0 (29126) Keba KeContact P30X: no switch configured
2026-07-05 20:12:58.172 - debug: semp.0 (29126) Keba KeContact P30X: new recommendation power 0 number
2026-07-05 20:12:58.173 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
2026-07-05 20:12:58.177 - debug: semp.0 (29126) Keba KeContact P30X: set new charge power 0 number
2026-07-05 20:12:58.179 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:58.179 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:58.184 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:58.184 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:58.186 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:58.186 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:58.186 - debug: semp.0 (29126) Keba KeContact P30X: subscribe OID_IsCharging 0_userdata.0.Stromversorgung.Wallbox-Plug
2026-07-05 20:12:58.189 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
2026-07-05 20:12:58.189 - debug: semp.0 (29126) Keba KeContact P30X: wallbox charging false
2026-07-05 20:12:58.191 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:58.191 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:58.191 - debug: semp.0 (29126) Keba KeContact P30X: subscribe OID_IsError kecontact.0.error1
2026-07-05 20:12:58.193 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
2026-07-05 20:12:58.194 - debug: semp.0 (29126) Keba KeContact P30X: wallbox error true
2026-07-05 20:12:58.195 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:58.195 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:58.196 - debug: semp.0 (29126) Keba KeContact P30X: subscribe OID_Counter 0_userdata.0.Stromversorgung.Wallbox-PowerW
2026-07-05 20:12:58.197 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:12:58.198 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:12:58.201 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:12:58.202 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:12:58.202 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:12:58.203 - debug: semp.0 (29126) Keba KeContact P30X: subscribe Devices.Keba KeContact P30X.MinEnergy
2026-07-05 20:12:58.203 - debug: semp.0 (29126) Keba KeContact P30X: subscribe Devices.Keba KeContact P30X.MaxEnergy
2026-07-05 20:12:58.207 - debug: semp.0 (29126) planning request: planningrequest set minEnergy 0
2026-07-05 20:12:58.209 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:58.209 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:58.209 - debug: semp.0 (29126) Gateway: set device
2026-07-05 20:12:58.210 - debug: semp.0 (29126) UpdateData
2026-07-05 20:12:58.210 - debug: semp.0 (29126) device {"ID":"F-30380000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false,"WallboxOID":{"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"}},"OptionalEnergy":true}
2026-07-05 20:12:58.210 - debug: semp.0 (29126) result [{"ID":"F-30380000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false,"WallboxOID":{"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"}},"OptionalEnergy":true}]
2026-07-05 20:12:59.150 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
2026-07-05 20:12:59.152 - debug: semp.0 (29126) Keba KeContact P30X: wallbox error true
2026-07-05 20:12:59.158 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:59.159 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:59.164 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
2026-07-05 20:12:59.164 - info: semp.0 (29126) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:12:59.164 - debug: semp.0 (29126) planning request: Planningrequest all timeframes canceled
2026-07-05 20:12:59.165 - debug: semp.0 (29126) Keba KeContact P30X: disconnect - timer fired
2026-07-05 20:12:59.165 - debug: semp.0 (29126) Keba KeContact P30X: no switch configured
2026-07-05 20:12:59.165 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
2026-07-05 20:12:59.165 - debug: semp.0 (29126) Keba KeContact P30X: wallbox charging false
2026-07-05 20:12:59.166 - debug: semp.0 (29126) Keba KeContact P30X: new recommendation power 0 number
2026-07-05 20:12:59.166 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
2026-07-05 20:12:59.170 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:59.170 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:59.171 - debug: semp.0 (29126) Keba KeContact P30X: set new charge power 0 number
2026-07-05 20:12:59.173 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:12:59.173 - debug: semp.0 (29126) Keba KeContact P30X: calc energy 0 1783275178198 = 0Wh
2026-07-05 20:12:59.173 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:12:59.179 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:12:59.179 - debug: semp.0 (29126) Keba KeContact P30X: calc energy 0 1783275179173 = 0Wh
2026-07-05 20:12:59.179 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:12:59.186 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:59.186 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:59.190 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:12:59.191 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:12:59.191 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:12:59.192 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:12:59.193 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:12:59.193 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:12:59.200 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:59.200 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:12:59.203 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:12:59.203 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:01.135 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:01.135 - info: semp.0 (29126) SempServer: adapter discovered by SHM
2026-07-05 20:13:01.176 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:01.192 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:14.142 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
2026-07-05 20:13:14.143 - debug: semp.0 (29126) Keba KeContact P30X: wallbox error true
2026-07-05 20:13:14.145 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:14.146 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:14.150 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
2026-07-05 20:13:14.150 - info: semp.0 (29126) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:13:14.151 - debug: semp.0 (29126) planning request: Planningrequest all timeframes canceled
2026-07-05 20:13:14.151 - debug: semp.0 (29126) Keba KeContact P30X: disconnect - timer fired
2026-07-05 20:13:14.151 - debug: semp.0 (29126) Keba KeContact P30X: no switch configured
2026-07-05 20:13:14.151 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
2026-07-05 20:13:14.151 - debug: semp.0 (29126) Keba KeContact P30X: wallbox charging false
2026-07-05 20:13:14.152 - debug: semp.0 (29126) Keba KeContact P30X: new recommendation power 0 number
2026-07-05 20:13:14.152 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
2026-07-05 20:13:14.164 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:14.164 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:14.166 - debug: semp.0 (29126) Keba KeContact P30X: set new charge power 0 number
2026-07-05 20:13:14.168 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:13:14.168 - debug: semp.0 (29126) Keba KeContact P30X: calc energy 0 1783275179179 = 0Wh
2026-07-05 20:13:14.168 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:13:14.169 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:13:14.169 - debug: semp.0 (29126) Keba KeContact P30X: calc energy 0 1783275194168 = 0Wh
2026-07-05 20:13:14.169 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:13:14.178 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:14.178 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:14.185 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:13:14.185 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:13:14.186 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:13:14.186 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:13:14.186 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:13:14.186 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:13:14.189 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:14.189 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:14.191 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:14.191 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:18.127 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:18.147 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:18.165 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:29.141 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
2026-07-05 20:13:29.141 - debug: semp.0 (29126) Keba KeContact P30X: wallbox error true
2026-07-05 20:13:29.144 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:29.144 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:29.147 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
2026-07-05 20:13:29.148 - info: semp.0 (29126) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:13:29.148 - debug: semp.0 (29126) planning request: Planningrequest all timeframes canceled
2026-07-05 20:13:29.148 - debug: semp.0 (29126) Keba KeContact P30X: disconnect - timer fired
2026-07-05 20:13:29.148 - debug: semp.0 (29126) Keba KeContact P30X: no switch configured
2026-07-05 20:13:29.148 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
2026-07-05 20:13:29.149 - debug: semp.0 (29126) Keba KeContact P30X: wallbox charging false
2026-07-05 20:13:29.152 - debug: semp.0 (29126) Keba KeContact P30X: new recommendation power 0 number
2026-07-05 20:13:29.152 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
2026-07-05 20:13:29.160 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:29.161 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:29.165 - debug: semp.0 (29126) Keba KeContact P30X: set new charge power 0 number
2026-07-05 20:13:29.167 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:13:29.167 - debug: semp.0 (29126) Keba KeContact P30X: calc energy 0 1783275194169 = 0Wh
2026-07-05 20:13:29.168 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:13:29.168 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:13:29.168 - debug: semp.0 (29126) Keba KeContact P30X: calc energy 0 1783275209167 = 0Wh
2026-07-05 20:13:29.168 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:13:29.173 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:29.173 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:29.177 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:13:29.178 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:13:29.178 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:13:29.179 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:13:29.180 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:13:29.180 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:13:29.185 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:29.186 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:29.188 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:29.188 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:38.148 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:38.164 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:38.182 - debug: semp.0 (29126) SempServer: SHM requested description
2026-07-05 20:13:44.148 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number
2026-07-05 20:13:44.148 - debug: semp.0 (29126) Keba KeContact P30X: wallbox error true
2026-07-05 20:13:44.152 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:44.153 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:44.154 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean
2026-07-05 20:13:44.154 - info: semp.0 (29126) Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false
2026-07-05 20:13:44.154 - debug: semp.0 (29126) planning request: Planningrequest all timeframes canceled
2026-07-05 20:13:44.154 - debug: semp.0 (29126) Keba KeContact P30X: disconnect - timer fired
2026-07-05 20:13:44.155 - debug: semp.0 (29126) Keba KeContact P30X: no switch configured
2026-07-05 20:13:44.155 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean
2026-07-05 20:13:44.155 - debug: semp.0 (29126) Keba KeContact P30X: wallbox charging false
2026-07-05 20:13:44.155 - debug: semp.0 (29126) Keba KeContact P30X: new recommendation power 0 number
2026-07-05 20:13:44.155 - debug: semp.0 (29126) Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number
2026-07-05 20:13:44.162 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:44.162 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:44.163 - debug: semp.0 (29126) Keba KeContact P30X: set new charge power 0 number
2026-07-05 20:13:44.164 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:13:44.165 - debug: semp.0 (29126) Keba KeContact P30X: calc energy 0 1783275209168 = 0Wh
2026-07-05 20:13:44.165 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:13:44.166 - debug: semp.0 (29126) Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off
2026-07-05 20:13:44.166 - debug: semp.0 (29126) Keba KeContact P30X: calc energy 0 1783275224165 = 0Wh
2026-07-05 20:13:44.167 - debug: semp.0 (29126) planning request: got energy used 0
2026-07-05 20:13:44.181 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:44.181 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:44.184 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:13:44.184 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:13:44.185 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:13:44.189 - debug: semp.0 (29126) Keba KeContact P30X: set status detection limit to 500
2026-07-05 20:13:44.189 - debug: semp.0 (29126) Keba KeContact P30X: status detection time limit is 1 going to off
2026-07-05 20:13:44.189 - debug: semp.0 (29126) Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running
2026-07-05 20:13:44.201 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:44.203 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected
2026-07-05 20:13:44.207 - debug: semp.0 (29126) Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1783265264205,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1783265264205} from Devices.Keba KeContact P30X.State
2026-07-05 20:13:44.207 - debug: semp.0 (29126) Keba KeContact P30X: in SetState, no new state to set, is plug not connected