Neues YouTube-Video: Visualisierung im Devices-Adapter

[Stefan_NK]

@thomas-braun

[arteck]

@stefan_nk der Adapter findet das TI Board nicht..

weil :

serialport gelockt
oder
es steckt in USB3
oder
hast du eine SSD noch im USB
oder
board hat sich verabschiedet
oder
kabel nicht OK
oder
USB HUB in Benutzung

[Stefan_NK]

@arteck hm....
serialport gelockt... wie kann ich das überprüfen bzw. freigeben? Woher könnte der gelockt sein, nach einem Neustart?
es steckt in USB3... ist bei USB 2 angesteckt
hast du eine SSD noch im USB... Der Raspi läuft mit einem USB-Stick, wie das letzte Jahr auch
board hat sich verabschiedet... hoffe ich nicht. kann ich auch nicht wirklich prüfen nur auf Verdacht ein Neues bestellen
kabel nicht OK... hab es an dem bisherigen 30cm Kabel, aber auch an einem 3m Kabel probiert
USB HUB in Benutzung... nein, es ist lediglich der Speicherstick und das Board angeschlossen.

[hydrotec]

@stefan_nk
Hallo Stefan,
zwei Sachen sind mir aufgefallen.
Zum einen ist bei deiner Konfiguration keine Sendeleistung ausgewählt.
(Hat vermutlich nichts mit deinem aktuellen Problem zu tun, ist mir nur aufgefallen)
Was eher auf dein Problem mit dem Adapter zu tun haben könnte,
deine Firmeware des zigbee-sticks ist sehr neu

"revision":20210708

Vermutlich hat der zigbee-Adapter in der Version 1.5.6 damit Probleme.
Versuche den Adapter auf 1.6.0 zu aktuallisieren.
1.6.0 (2021-08-09)

Hoffe das hat dir etwas weiter geholfen.

Gruß, Karsten

[Stefan_NK]

Hallo Zusammen.... bin nun echt am Verzweifeln...

Ich habe den kompletten Raspi nochmals neu installiert. Es ist nichts außer der aktuellen Version von Raspberry Pi OS Lite und dem aktuellen iobroker wie hier beschrieben installiert.
Das Image des OS wurde auf den USB-Stick installiert, der in einem USB3 Anschluß steckt.
Die cc26x2r1 wurde (mit verschiedenen Kabeln getestet) an einen USB2 Anschluß gesteckt. Genau die gleiche Konstellation war bisher in Verwendung und hat vor der Neuinstallation einwandfrei funktioniert.
Aufgrund der Probleme habe ich lediglich die aktuelle FW des cc26x2r1 installiert

Adapterseitig ist vom admin, backitup, discovery, javascript und zigbee jeweils eine Instanz installiert.
Die zigbee-Adaptereinstellung wie folgt:
COM-Anschlußname: /dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.16__Embed_with_CMSIS-DAP_L1100F8C-if00
Tpy: TI Z-Stack&CCxxxx Timer: 60
Erweiterte Pan ID: DDDDDDDDDDDDDDDD Pan ID: 6754
Kanal 11
Transportschlüssel: 01030507090B0D0F00020406080A0C0D
Sendeleistung: high

Ich bekomme den Adapter einfach nicht zum Laufen. Kann mir hier denn wirklich keiner helfen?

Anbeinochmals das gesamte Log, gefiltert auf zigbee.

2021-08-22 21:14:18.687 - error: zigbee.0 (1557) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2021-08-22 21:14:18.689 - error: zigbee.0 (1557) Failed to start Zigbee
2021-08-22 21:14:18.690 - error: zigbee.0 (1557) Error herdsman start
2021-08-22 21:14:18.951 - info: host.SmartHome stopInstance system.adapter.zigbee.0 (force=false, process=true)
2021-08-22 21:14:18.959 - info: host.SmartHome stopInstance system.adapter.zigbee.0 send kill signal
2021-08-22 21:14:18.959 - info: zigbee.0 (1557) Got terminate signal TERMINATE_YOURSELF
2021-08-22 21:14:18.962 - info: zigbee.0 (1557) cleaned everything up...
2021-08-22 21:14:18.970 - info: zigbee.0 (1557) Zigbee: disabling joining new devices.
2021-08-22 21:14:18.973 - warn: zigbee.0 (1557) Failed to stop zigbee during startup
2021-08-22 21:14:18.975 - info: zigbee.0 (1557) terminating
2021-08-22 21:14:18.977 - info: zigbee.0 (1557) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-08-22 21:14:18.979 - error: zigbee.0 (1557) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-08-22 21:14:18.980 - error: zigbee.0 (1557) unhandled promise rejection: Cannot read property 'getEntries' of null
2021-08-22 21:14:18.983 - error: zigbee.0 (1557) TypeError: Cannot read property 'getEntries' of null
at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55)
at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:240:16)
at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:303:31)
at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:228:49)
at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:222:43)
at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:214:42)
at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:385:20)
at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:696:41)
at processTicksAndRejections (node:internal/process/task_queues:96:5)
2021-08-22 21:14:18.984 - error: zigbee.0 (1557) Cannot read property 'getEntries' of null
2021-08-22 21:14:19.559 - info: host.SmartHome instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-08-22 21:14:22.009 - info: host.SmartHome instance system.adapter.zigbee.0 started with pid 1574
2021-08-22 21:14:24.650 - info: zigbee.0 (1574) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.7.0, js-controller: 3.3.15
2021-08-22 21:14:24.700 - info: zigbee.0 (1574) Starting Zigbee npm ...
2021-08-22 21:14:25.031 - info: zigbee.0 (1574) Installed Version: iobroker.zigbee@1.5.6
2021-08-22 21:14:44.647 - error: zigbee.0 (1574) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2021-08-22 21:14:44.650 - error: zigbee.0 (1574) Failed to start Zigbee
2021-08-22 21:14:44.651 - error: zigbee.0 (1574) Error herdsman start
2021-08-22 21:14:54.654 - info: zigbee.0 (1574) Try to reconnect. 1 attempts left
2021-08-22 21:14:54.656 - info: zigbee.0 (1574) Starting Zigbee npm ...
2021-08-22 21:14:54.733 - info: zigbee.0 (1574) Installed Version: iobroker.zigbee@1.5.6
2021-08-22 21:14:54.920 - error: zigbee.0 (1574) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2021-08-22 21:14:54.921 - error: zigbee.0 (1574) Failed to start Zigbee
2021-08-22 21:14:54.922 - error: zigbee.0 (1574) Error herdsman start
2021-08-22 21:22:13.324 - error: zigbee.0 (1574) getGroups: caught error: TypeError: Cannot read property 'getGroups' of undefined
2021-08-22 21:24:41.676 - info: host.SmartHome stopInstance system.adapter.zigbee.0 (force=false, process=true)
2021-08-22 21:24:41.686 - info: zigbee.0 (1574) Got terminate signal TERMINATE_YOURSELF
2021-08-22 21:24:41.695 - info: host.SmartHome stopInstance system.adapter.zigbee.0 send kill signal
2021-08-22 21:24:41.689 - info: zigbee.0 (1574) cleaned everything up...
2021-08-22 21:24:41.697 - info: zigbee.0 (1574) Zigbee: disabling joining new devices.
2021-08-22 21:24:41.702 - warn: zigbee.0 (1574) Failed to stop zigbee during startup
2021-08-22 21:24:41.704 - info: zigbee.0 (1574) terminating
2021-08-22 21:24:41.706 - info: zigbee.0 (1574) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-08-22 21:24:41.709 - error: zigbee.0 (1574) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-08-22 21:24:41.710 - error: zigbee.0 (1574) unhandled promise rejection: Cannot read property 'getEntries' of null
2021-08-22 21:24:41.714 - error: zigbee.0 (1574) TypeError: Cannot read property 'getEntries' of null
at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55)
at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:240:16)
at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:303:31)
at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:228:49)
at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:222:43)
at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:214:42)
at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:385:20)
at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:696:41)
at processTicksAndRejections (node:internal/process/task_queues:96:5)
2021-08-22 21:24:41.715 - error: zigbee.0 (1574) Cannot read property 'getEntries' of null
2021-08-22 21:24:42.257 - info: host.SmartHome instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-08-22 21:24:44.744 - info: host.SmartHome instance system.adapter.zigbee.0 started with pid 1610
2021-08-22 21:24:47.397 - info: zigbee.0 (1610) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.7.0, js-controller: 3.3.15
2021-08-22 21:24:47.443 - info: zigbee.0 (1610) Starting Zigbee npm ...
2021-08-22 21:24:47.826 - info: zigbee.0 (1610) Installed Version: iobroker.zigbee@1.5.6
2021-08-22 21:24:55.853 - error: zigbee.0 (1610) getGroups: caught error: TypeError: Cannot read property 'getGroups' of undefined
2021-08-22 21:25:07.398 - error: zigbee.0 (1610) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2021-08-22 21:25:07.401 - error: zigbee.0 (1610) Failed to start Zigbee
2021-08-22 21:25:07.402 - error: zigbee.0 (1610) Error herdsman start
2021-08-22 21:25:17.409 - info: zigbee.0 (1610) Try to reconnect. 1 attempts left
2021-08-22 21:25:17.411 - info: zigbee.0 (1610) Starting Zigbee npm ...
2021-08-22 21:25:17.462 - info: zigbee.0 (1610) Installed Version: iobroker.zigbee@1.5.6
2021-08-22 21:25:17.668 - error: zigbee.0 (1610) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2021-08-22 21:25:17.668 - error: zigbee.0 (1610) Failed to start Zigbee
2021-08-22 21:25:17.669 - error: zigbee.0 (1610) Error herdsman start

[Thomas Braun]

@stefan_nk

Erweiterte Pan ID: DDDDDDDDDDDDDDDD

Ändere die.

[Stefan_NK]

@thomas-braun
Geändert in

DCDDDDDADDDDDDDD

leider kein Erfolg

2021-08-22 21:45:03.266 - error: zigbee.0 (1826) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2021-08-22 21:45:03.268 - error: zigbee.0 (1826) Failed to start Zigbee
2021-08-22 21:45:03.269 - error: zigbee.0 (1826) Error herdsman start
2021-08-22 21:45:03.722 - info: host.SmartHome stopInstance system.adapter.zigbee.0 (force=false, process=true)
2021-08-22 21:45:03.733 - info: zigbee.0 (1826) Got terminate signal TERMINATE_YOURSELF
2021-08-22 21:45:03.743 - info: host.SmartHome stopInstance system.adapter.zigbee.0 send kill signal
2021-08-22 21:45:03.737 - info: zigbee.0 (1826) cleaned everything up...
2021-08-22 21:45:03.747 - info: zigbee.0 (1826) Zigbee: disabling joining new devices.
2021-08-22 21:45:03.750 - warn: zigbee.0 (1826) Failed to stop zigbee during startup
2021-08-22 21:45:03.751 - info: zigbee.0 (1826) terminating
2021-08-22 21:45:03.753 - info: zigbee.0 (1826) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-08-22 21:45:03.755 - error: zigbee.0 (1826) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-08-22 21:45:03.755 - error: zigbee.0 (1826) unhandled promise rejection: Cannot read property 'getEntries' of null
2021-08-22 21:45:03.757 - error: zigbee.0 (1826) TypeError: Cannot read property 'getEntries' of null
at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55)
at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:240:16)
at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:303:31)
at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:228:49)
at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:222:43)
at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:214:42)
at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:385:20)
at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:696:41)
at processTicksAndRejections (node:internal/process/task_queues:96:5)
2021-08-22 21:45:03.758 - error: zigbee.0 (1826) Cannot read property 'getEntries' of null
2021-08-22 21:45:04.353 - info: host.SmartHome instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-08-22 21:45:06.796 - info: host.SmartHome instance system.adapter.zigbee.0 started with pid 1842
2021-08-22 21:45:09.395 - info: zigbee.0 (1842) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.7.0, js-controller: 3.3.15
2021-08-22 21:45:09.441 - info: zigbee.0 (1842) Starting Zigbee npm ...
2021-08-22 21:45:09.776 - info: zigbee.0 (1842) Installed Version: iobroker.zigbee@1.5.6
2021-08-22 21:45:29.401 - error: zigbee.0 (1842) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2021-08-22 21:45:29.403 - error: zigbee.0 (1842) Failed to start Zigbee
2021-08-22 21:45:29.405 - error: zigbee.0 (1842) Error herdsman start

[Thomas Braun]

@stefan_nk

node: v16.7.0 zusammen mit npm@7 ?
Das ist ggf. dein Problem. Installier node12, maximal node14.

[Stefan_NK]

@thomas-braun
So... habe node 12 installiert, was übrigens auch zuerst installiert war. Das Update war nur ein Versuch.
Sobald ich das Modul eintrage, wird der Adapter nicht mehr grün.

2021-08-22 23:40:06.719 - info: host.SmartHome stopInstance system.adapter.zigbee.0 (force=false, process=true)
2021-08-22 23:40:06.737 - info: zigbee.0 (1967) Got terminate signal TERMINATE_YOURSELF
2021-08-22 23:40:06.740 - info: host.SmartHome stopInstance system.adapter.zigbee.0 send kill signal
2021-08-22 23:40:06.740 - info: zigbee.0 (1967) cleaned everything up...
2021-08-22 23:40:06.748 - info: zigbee.0 (1967) Zigbee: disabling joining new devices.
2021-08-22 23:40:06.752 - warn: zigbee.0 (1967) Failed to stop zigbee during startup
2021-08-22 23:40:06.754 - info: zigbee.0 (1967) terminating
2021-08-22 23:40:06.756 - info: zigbee.0 (1967) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-08-22 23:40:06.758 - error: zigbee.0 (1967) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2021-08-22 23:40:06.759 - error: zigbee.0 (1967) unhandled promise rejection: Cannot read property 'getEntries' of null
2021-08-22 23:40:06.760 - error: zigbee.0 (1967) TypeError: Cannot read property 'getEntries' of null
at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55)
at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:240:16)
at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:303:31)
at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:228:49)
at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:222:43)
at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:214:42)
at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:385:20)
at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:696:41)
at processTicksAndRejections (internal/process/task_queues.js:97:5)
2021-08-22 23:40:06.761 - error: zigbee.0 (1967) Cannot read property 'getEntries' of null
2021-08-22 23:40:07.406 - info: host.SmartHome instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-08-22 23:40:09.783 - info: host.SmartHome instance system.adapter.zigbee.0 started with pid 1986
2021-08-22 23:40:12.284 - info: zigbee.0 (1986) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.zigbee, node: v12.22.5, js-controller: 3.3.15
2021-08-22 23:40:12.389 - info: zigbee.0 (1986) Starting Zigbee npm ...
2021-08-22 23:40:12.688 - info: zigbee.0 (1986) Installed Version: iobroker.zigbee@1.5.6
2021-08-22 23:40:14.465 - error: zigbee.0 (1986) Configuration is not consistent with adapter state/backup!
2021-08-22 23:40:14.465 - error: zigbee.0 (1986) - PAN ID: configured=6754, adapter=6754
2021-08-22 23:40:14.466 - error: zigbee.0 (1986) - Extended PAN ID: configured=dddddddddadddddc, adapter=00124b001caab81b
2021-08-22 23:40:14.466 - error: zigbee.0 (1986) - Network Key: configured=01030507090b0d0f00020406080a0c0d, adapter=01030507090b0d0f00020406080a0c0d
2021-08-22 23:40:14.467 - error: zigbee.0 (1986) - Channel List: configured=11, adapter=11
2021-08-22 23:40:14.468 - error: zigbee.0 (1986) Please update configuration to prevent further issues.
2021-08-22 23:40:14.468 - error: zigbee.0 (1986) If you wish to re-commission your network, please remove coordinator backup at /opt/iobroker/iobroker-data/zigbee_0/nvbackup.json.
2021-08-22 23:40:14.468 - error: zigbee.0 (1986) Re-commissioning your network will require re-pairing of all devices!
2021-08-22 23:40:14.469 - error: zigbee.0 (1986) Starting zigbee-herdsman problem : "startup failed - configuration-adapter mismatch - see logs above for more information"
2021-08-22 23:40:14.470 - error: zigbee.0 (1986) Failed to start Zigbee
2021-08-22 23:40:14.470 - error: zigbee.0 (1986) Error herdsman start
2021-08-22 23:40:24.472 - info: zigbee.0 (1986) Try to reconnect. 1 attempts left
2021-08-22 23:40:24.474 - info: zigbee.0 (1986) Starting Zigbee npm ...
2021-08-22 23:40:24.515 - info: zigbee.0 (1986) Installed Version: iobroker.zigbee@1.5.6
2021-08-22 23:40:24.738 - error: zigbee.0 (1986) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2021-08-22 23:40:24.738 - error: zigbee.0 (1986) Failed to start Zigbee
2021-08-22 23:40:24.739 - error: zigbee.0 (1986) Error herdsman start

[Thomas Braun]

@stefan_nk

PAN ID: configured=6754, adapter=6754

2021-08-22 23:40:14.466 - error: zigbee.0 (1986) - Extended PAN ID: configured=dddddddddadddddc, adapter=00124b001caab81b

Richtige IDs eintragen

[Stefan_NK]

@thomas-braun Welche IDs muss ich hier eintragen?

[Thomas Braun]

@stefan_nk
Steht doch da.

[Stefan_NK]

@thomas-braun wenn ich es wissen und verstehen würde woran das Ding hakt, hätte ich nicht gefragt

[Thomas Braun]

@stefan_nk 1986) -

Extended PAN ID: configured=dddddddddadddddc, adapter=00124b001caab81b

In der config des Adapters steht das eine, der Stick erwartet das andere.

[Stefan_NK]

@thomas-braun sagte in Probleme mit Zigbee und CC26X2R1 nach Neuinstallation:

00124b001caab81b

Ok, ich habe jetzt die Adapter-ID 00124b001caab81b bei der erweiterten PAN-ID eingetragen. Die Konfig hatte ich bei der alten Installation nicht, aber der Adapter ist jetzt mal grün. Vielen, vielen, vielen Dank