[How-to] Node.js ioBroker richtig updaten-2021/22 Edition

Thomas Braun

RELEASE	STATUS	INITIAL RELEASE	ACTIVE LTS START	MAINTENANCE LTS START	END-OF-LIFE
v12		2019-04-23	2019-10-21	        2020-11-30	        2022-04-30

https://nodejs.org/en/about/releases/

Für nodeJS12 also ist im April 22 Schicht. Also kannst du auch jetzt wechseln. Die Erfahrung zeigt: Je länger gewartet wird, umso mehr Probleme gibt es

TepMan

Nach dem Update auf nodejs 14 startet der Jeelink-Adapter nicht mehr:

host.raspi4
2021-11-20 10:50:26.370	error	instance system.adapter.jeelink.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
host.raspi4
2021-11-20 10:50:26.369	error	Caught by controller[0]: }
host.raspi4
2021-11-20 10:50:26.369	error	Caught by controller[0]: ]
host.raspi4
2021-11-20 10:50:26.368	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/lib/binding/node-v83-linux-arm/bindings.node'
host.raspi4
2021-11-20 10:50:26.368	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/addon-build/default/install-root/bindings.node',
host.raspi4
2021-11-20 10:50:26.368	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/addon-build/debug/install-root/bindings.node',
host.raspi4
2021-11-20 10:50:26.367	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/addon-build/release/install-root/bindings.node',
host.raspi4
2021-11-20 10:50:26.366	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/compiled/14.18.1/linux/arm/bindings.node',
host.raspi4
2021-11-20 10:50:26.366	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/build/default/bindings.node',
host.raspi4
2021-11-20 10:50:26.365	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/Release/bindings.node',
host.raspi4
2021-11-20 10:50:26.364	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/out/Release/bindings.node',
host.raspi4
2021-11-20 10:50:26.364	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/Debug/bindings.node',
host.raspi4
2021-11-20 10:50:26.364	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/out/Debug/bindings.node',
host.raspi4
2021-11-20 10:50:26.363	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node',
host.raspi4
2021-11-20 10:50:26.363	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/build/Debug/bindings.node',
host.raspi4
2021-11-20 10:50:26.362	error	Caught by controller[0]: '/opt/iobroker/node_modules/@serialport/bindings/build/bindings.node',
host.raspi4
2021-11-20 10:50:26.362	error	Caught by controller[0]: tries: [
host.raspi4
2021-11-20 10:50:26.361	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1085:14) {
host.raspi4
2021-11-20 10:50:26.361	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/@serialport/bindings/lib/index.js:14:22)
host.raspi4
2021-11-20 10:50:26.360	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:93:18)
host.raspi4
2021-11-20 10:50:26.359	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:974:19)
host.raspi4
2021-11-20 10:50:26.359	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:790:12)
host.raspi4
2021-11-20 10:50:26.358	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:950:32)
host.raspi4
2021-11-20 10:50:26.358	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)
host.raspi4
2021-11-20 10:50:26.357	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1085:14)
host.raspi4
2021-11-20 10:50:26.356	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/@serialport/bindings/lib/linux.js:1:36)
host.raspi4
2021-11-20 10:50:26.356	error	Caught by controller[0]: at bindings (/opt/iobroker/node_modules/@serialport/bindings/node_modules/bindings/bindings.js:126:9)
host.raspi4
2021-11-20 10:50:26.356	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/lib/binding/node-v83-linux-arm/bindings.node
host.raspi4
2021-11-20 10:50:26.355	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/addon-build/default/install-root/bindings.node
host.raspi4
2021-11-20 10:50:26.354	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/addon-build/debug/install-root/bindings.node
host.raspi4
2021-11-20 10:50:26.354	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/addon-build/release/install-root/bindings.node
host.raspi4
2021-11-20 10:50:26.353	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/compiled/14.18.1/linux/arm/bindings.node
host.raspi4
2021-11-20 10:50:26.352	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/build/default/bindings.node
host.raspi4
2021-11-20 10:50:26.351	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/Release/bindings.node
host.raspi4
2021-11-20 10:50:26.351	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/out/Release/bindings.node
host.raspi4
2021-11-20 10:50:26.350	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/Debug/bindings.node
host.raspi4
2021-11-20 10:50:26.349	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/out/Debug/bindings.node
host.raspi4
2021-11-20 10:50:26.349	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/build/Release/bindings.node
host.raspi4
2021-11-20 10:50:26.348	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/build/Debug/bindings.node
host.raspi4
2021-11-20 10:50:26.347	error	Caught by controller[0]: → /opt/iobroker/node_modules/@serialport/bindings/build/bindings.node
host.raspi4
2021-11-20 10:50:26.347	error	Caught by controller[0]: Error: Could not locate the bindings file. Tried:
host.raspi4
2021-11-20 10:50:26.342	error	Caught by controller[0]: ^
host.raspi4
2021-11-20 10:50:26.341	error	Caught by controller[0]: throw err;
host.raspi4
2021-11-20 10:50:26.332	error	Caught by controller[0]: /opt/iobroker/node_modules/@serialport/bindings/node_modules/bindings/bindings.js:135

Ich habe schon versucht, den Adapter neu zu bauen, steigt mit einem Fehler aus:

pi@raspi4:/opt/iobroker/node_modules/@serialport/bindings $ iobroker rebuild jeelink --install
npm install --loglevel error --production (System call1) in "/opt/iobroker/node_modules/iobroker.jeelink"
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’:
../src/serialport.cpp:329:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
     results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts));
                                                                                                ^
In file included from /home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:67,
                 from ../../../nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note:   candidate expects 3 arguments, 2 provided
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note:   candidate expects 3 arguments, 2 provided
../src/serialport.cpp:330:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
     results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr));
                                                                                                ^
In file included from /home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:67,
                 from ../../../nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note:   candidate expects 3 arguments, 2 provided
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note:   candidate expects 3 arguments, 2 provided
../src/serialport.cpp:331:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
     results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd));
                                                                                                ^
In file included from /home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:67,
                 from ../../../nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note:   candidate expects 3 arguments, 2 provided
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note:   candidate expects 3 arguments, 2 provided
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’:
../src/serialport.cpp:378:106: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::IntegerFactory<v8::Integer>::return_t)’
     results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate));
                                                                                                          ^
In file included from /home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:67,
                 from ../../../nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note:   candidate expects 3 arguments, 2 provided
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note:   candidate expects 3 arguments, 2 provided
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:787:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
make: *** [bindings.target.mk:112: Release/obj.target/bindings/src/serialport.o] Fehler 1
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:400:28)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:282:12)
gyp ERR! System Linux 5.10.63-v7l+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.jeelink/node_modules/@serialport/bindings
gyp ERR! node -v v14.18.1
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! @serialport/bindings@2.0.8 install: `prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @serialport/bindings@2.0.8 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
 
npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2021-11-20T09_52_25_659Z-debug.log
 
Rebuild jeelink done

Anhand des Outputs ist zu sehen, das serialport wohl Probleme macht, habe versucht, das nach der Anleitung oben direkt neu zu bauen, klappt leider auch nicht:

pi@raspi4:/opt/iobroker/node_modules/@serialport/bindings $ npm install --production
 
> @serialport/bindings@2.0.8 install /opt/iobroker/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild
 
prebuild-install WARN install No prebuilt binaries found (target=14.18.1 runtime=node arch=arm libc= platform=linux)
make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird betreten
  CXX(target) Release/obj.target/bindings/src/serialport.o
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’:
../src/serialport.cpp:329:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
     results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts));
                                                                                                ^
In file included from /home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:67,
                 from ../node_modules/nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note:   candidate expects 3 arguments, 2 provided
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note:   candidate expects 3 arguments, 2 provided
../src/serialport.cpp:330:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
     results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr));
                                                                                                ^
In file included from /home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:67,
                 from ../node_modules/nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note:   candidate expects 3 arguments, 2 provided
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note:   candidate expects 3 arguments, 2 provided
../src/serialport.cpp:331:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
     results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd));
                                                                                                ^
In file included from /home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:67,
                 from ../node_modules/nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note:   candidate expects 3 arguments, 2 provided
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note:   candidate expects 3 arguments, 2 provided
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’:
../src/serialport.cpp:378:106: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::IntegerFactory<v8::Integer>::return_t)’
     results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate));
                                                                                                          ^
In file included from /home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:67,
                 from ../node_modules/nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3670:37: note:   candidate expects 3 arguments, 2 provided
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
   V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
                                     ^~~
/home/iobroker/.cache/node-gyp/14.18.1/include/node/v8.h:3673:37: note:   candidate expects 3 arguments, 2 provided
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../node_modules/nan/nan.h:58,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:787:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/14.18.1/include/node/node.h:821:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
make: *** [bindings.target.mk:112: Release/obj.target/bindings/src/serialport.o] Fehler 1
make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird verlassen
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)
gyp ERR! stack     at ChildProcess.emit (events.js:400:28)
gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:282:12)
gyp ERR! System Linux 5.10.63-v7l+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/@serialport/bindings
gyp ERR! node -v v14.18.1
gyp ERR! node-gyp -v v5.1.0
gyp ERR! not ok
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! @serialport/bindings@2.0.8 install: `prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @serialport/bindings@2.0.8 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
 
npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2021-11-20T09_54_34_853Z-debug.log

Bin jetzt mit meinem Latein am Ende und bräuchte eure Hilfe.

js-controller ist 3.3.18, admin ist 5.x, weitere Daten zum System:

Plattform
linux
Betriebssystem
linux
Architektur
arm
CPUs
4
Geschwindigkeit
1500 MHz
Modell
ARMv7 Processor rev 3 (v7l)
RAM
7.71 GB
System-Betriebszeit
01:09:25
Node.js
v14.18.1 (Empfohlene Version v12.22.7)
NPM
6.14.15
Datenträgergröße
457.2 GB
freier Festplattenspeicher
425.39 GB
Anzahl der Adapter
363
Betriebszeit
00:47:26
Aktive Instanzen
18
location
/opt/iobroker/
Hostname
raspi4

Thomas Braun · js-controller ist 3.3.18, admin ist 5.x, weitere Daten zum System:

@tepman
Ein separater Thread ist schon sinnvoll.
Hier geht es weiter:
https://forum.iobroker.net/topic/49521/jeelink-adapter-startet-nicht-mehr

apollon77

@marty56 Das kann ich Dir nicht sagen ... EIn Jahr mindestens ... Zwei vllt

Thomas Braun

@apollon77

Nee, max 6 Monate noch für v12:
EOL ist am 30.04.2022

Jan1

Ich finde die Update Diskussion immer wieder etwas lustig, da man früher oder später eh muss und ja, muss. Also somit hat sich die Frage wie lange man noch auf ner alten Version bleiben kann in sofern beantwortet. Man sucht sich ein Tag an dem man Lust und Zeit hat und macht es einfach, fertig.

Sollten danach tatsächlich Fehler auftauchen, dann meldet man diese, denn nur so werden die auch beseitigt.

Segway

@apollon77
Mittlerweile wird ja nodejs 14 empfohlen.
Frage: Läuft Iobroker auch bereits unter nodejs16 ?

Thomas Braun

@segway
Das dürfte stark von den jeweiligen Adaptern abhängen. Bei mir läuft es auch mit node16/17 und npm@8 im Testsystem.
Die Empfehlung ist aber ganz klar node 12/14 zu verwenden.

marsmännchen

Hallo, beim Update auf Node.js 14
bekomme ich folgende Fehlermeldung:

Holen:1 http://archive.raspberrypi.org/debian buster InRelease [32,6 kB]
Holen:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15,0 kB]
Holen:3 https://deb.nodesource.com/node_12.x buster InRelease [4.584 B]
Holen:4 https://deb.nodesource.com/node_12.x buster/main armhf Packages [777 B]
Paketlisten werden gelesen... Fertig
E: Für das Depot »http://raspbian.raspberrypi.org/raspbian buster InRelease« wurde der »Suite«-Wert von »stable« in »oldstable« geändert.
N: Sie müssen dies explizit bestätigen, bevor Aktualisierungen von diesem Depot angewendet werden können. Lesen Sie die apt-secure(8)-Handbuchseite, wenn Sie we                         itere Informationen benötigen.
E: Für das Depot »http://archive.raspberrypi.org/debian buster InRelease« wurde  der »Suite«-Wert von »testing« in »oldstable« geändert.
N: Sie müssen dies explizit bestätigen, bevor Aktualisierungen von diesem Depot  angewendet werden können. Lesen Sie die apt-secure(8)-Handbuchseite, wenn Sie we                         itere Informationen benötigen.
Error executing command, exiting

Heißt das mein Buster ist zu alt?

No LSB modules are available.
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster

Mein Slave hat ordnungsgemäß das Update durchgeführt, da ist aber "bullseye"
Wie könnte ich da weiter machen?
MfG
Patrick

Thomas Braun

@marsmännchen

sudo apt update
sudo apt dist-upgrade

Ggf. Fragen zum Suite-Wert bestätigen.

Jan1

@marsmännchen
Du hast die Nodesource noch auf 12. Normal änderst die auf 14 und machst dann ganz normal ein System Update, dann meckert da auch nix ;)

Homoran

@marsmännchen sagte in [How-to] Node.js für ioBroker richtig updaten - 2021 Edition:

Heißt das mein Buster ist zu alt?

nicht wirklich, aber es ist im Moment nicht (mehr) die aktuelle Version sondern oldstable

marsmännchen

@jan1 @Thomas-Braun @Homoran

Danke Ihr drei!!:+1:

Thomas Braun

@jan1 sagte in [How-to] Node.js für ioBroker richtig updaten - 2021 Edition:

machst dann ganz normal ein System Update, dann meckert da auch nix

Das Meckern hat aber hier nichts mit nodejs zu tun. Da wäre auch mit node14 im Repo 'gemeckert' worden.

Jan1

@marsmännchen
Und/Oder gehst mir dem Buster auch gleich mal auf Bullseye hoch.

@Thomas-Braun
kommt bei mir ja nie vor, da immer aktuell ;)

Thomas Braun

@jan1 sagte in [How-to] Node.js für ioBroker richtig updaten - 2021 Edition:

kommt bei mir ja nie vor, da immer aktuell

Eher weil du apt statt apt-get verwendest, oder?
Denn mit apt kommt die Meldung nicht (jedenfalls nicht in der Form).

Jan1

@thomas-braun
sag ich doch, immer aktuell und apt-get ist alt ;)

marsmännchen

@jan1 Und was für Befehle bräuchte ich um auf Bullseye zu komme?

Jan1

@marsmännchen
Das ist bisschen mehr und hier im Thread OT.
Da gabs aber wenn ich nicht irre für den Pi schon ein eigenen Thread.

Thomas Braun

@marsmännchen

Schau hier rein:

https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye

Community Forum

NEWS

[How-to] Node.js ioBroker richtig updaten-2021/22 Edition

Support us

611

32.7k

82.5k

1.3m