Test Adapter SmartControl 0.3.x-0.6.x Latest

[crunchip]

@luft-post deaktiviere die mal alle und mach einen Auslöser mit einer festen Uhrzeit z.b.22:30 oder verwende mal eine astrozeit

sind eigentlich die Datenpunkte unter smartcontrol.0.info.astroTimes vorhanden

[luft-post]

@crunchip Moin,

also astrozeit und feste Urzeit gehen.

Datenpunkte unter smartcontrol.0.info.astroTimes sind vorhanden.

in welchen Datenpunkt stehen den eigentlich die Zeit Auslöser (Crom) drin?

[crunchip]

@luft-post sagte in Test Adapter SmartControl 0.3.x-0.6.x Latest:

in welchen Datenpunkt stehen den eigentlich die Zeit Auslöser (Crom) drin?

na genau da wie in deinem screen zu sehen

[luft-post]

@crunchip aber da stehen ja nicht die Zeitangaben wie diese hier

[crunchip]

@luft-post was zeigt denn das log an, wenn du den Adapter auf debug stellst?

[luft-post]

@crunchip

hier sagt er:

smartcontrol.0
2025-10-01 12:52:01.652	debug	[_asyncOnMessage] Configuration verification failed, 1 issue(s) found.

hier mal der gesamte log

smartcontrol.0
2025-10-01 12:52:14.450	debug	State change 'device-reminder.0.Waschmaschiene.Status': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:14.450	debug	Trigger 'Waschmaschine läuft_' activated, but not meeting conditions (triggerStateVal 'in action' != stateObject.val 'standby' ), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:14.450	debug	Trigger 'Waschmaschine aus_' activated, but not meeting conditions (triggerStateVal 'switched off' != stateObject.val 'standby' ), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:14.450	debug	Trigger [Waschmaschine Fertig_] Zone(s) will not be activated since no zone found which meets all conditions.

smartcontrol.0
2025-10-01 12:52:14.450	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'device-reminder.0.Waschmaschiene.Status' changed.

smartcontrol.0
2025-10-01 12:52:14.449	debug	State Change: ACCEPTED – state 'device-reminder.0.Waschmaschiene.Status' change: ack 'true' - "Real" adapter state (device-reminder.0.Waschmaschiene.Status) requires ack:true

smartcontrol.0
2025-10-01 12:52:13.109	debug	State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:13.109	debug	State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true.

smartcontrol.0
2025-10-01 12:52:13.058	debug	State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:13.058	debug	State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true.

smartcontrol.0
2025-10-01 12:52:13.057	info	Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG.

smartcontrol.0
2025-10-01 12:52:13.056	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer.

smartcontrol.0
2025-10-01 12:52:13.054	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:13.054	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:13.053	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:13.049	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:13.049	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:13.048	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:12.995	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer).

smartcontrol.0
2025-10-01 12:52:12.994	debug	State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:12.994	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully.

smartcontrol.0
2025-10-01 12:52:12.994	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue'

smartcontrol.0
2025-10-01 12:52:12.994	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions ===

smartcontrol.0
2025-10-01 12:52:12.994	debug	Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:12.994	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed.

smartcontrol.0
2025-10-01 12:52:12.994	debug	State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true

smartcontrol.0
2025-10-01 12:52:12.994	debug	State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:12.994	debug	Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions.

smartcontrol.0
2025-10-01 12:52:12.994	debug	Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:12.994	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed.

smartcontrol.0
2025-10-01 12:52:12.994	debug	State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true

smartcontrol.0
2025-10-01 12:52:10.081	debug	State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:10.081	debug	State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true.

smartcontrol.0
2025-10-01 12:52:10.069	debug	State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:10.069	debug	State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true.

smartcontrol.0
2025-10-01 12:52:10.069	info	Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG.

smartcontrol.0
2025-10-01 12:52:10.067	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer.

smartcontrol.0
2025-10-01 12:52:10.055	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:10.055	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:10.055	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:10.047	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:10.046	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:10.046	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:09.981	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer).

smartcontrol.0
2025-10-01 12:52:09.981	debug	State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:09.981	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully.

smartcontrol.0
2025-10-01 12:52:09.981	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue'

smartcontrol.0
2025-10-01 12:52:09.981	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions ===

smartcontrol.0
2025-10-01 12:52:09.981	debug	Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:09.981	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed.

smartcontrol.0
2025-10-01 12:52:09.981	debug	State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true

smartcontrol.0
2025-10-01 12:52:09.981	debug	State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:09.981	debug	Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions.

smartcontrol.0
2025-10-01 12:52:09.981	debug	Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:09.981	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed.

smartcontrol.0
2025-10-01 12:52:09.981	debug	State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true

smartcontrol.0
2025-10-01 12:52:07.143	debug	State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:07.143	debug	State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true.

smartcontrol.0
2025-10-01 12:52:07.098	debug	State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:07.098	debug	State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true.

smartcontrol.0
2025-10-01 12:52:07.097	info	Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG.

smartcontrol.0
2025-10-01 12:52:07.096	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer.

smartcontrol.0
2025-10-01 12:52:07.093	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:07.093	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:07.093	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:07.089	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:07.089	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:07.089	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:07.041	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer).

smartcontrol.0
2025-10-01 12:52:07.041	debug	State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:07.041	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully.

smartcontrol.0
2025-10-01 12:52:07.041	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue'

smartcontrol.0
2025-10-01 12:52:07.041	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions ===

smartcontrol.0
2025-10-01 12:52:07.041	debug	Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:07.041	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed.

smartcontrol.0
2025-10-01 12:52:07.041	debug	State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true

smartcontrol.0
2025-10-01 12:52:07.041	debug	State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:07.041	debug	Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions.

smartcontrol.0
2025-10-01 12:52:07.040	debug	Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:07.040	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed.

smartcontrol.0
2025-10-01 12:52:07.040	debug	State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true

smartcontrol.0
2025-10-01 12:52:04.406	debug	State change 'device-reminder.0.Waschmaschiene.Status': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:04.406	debug	Trigger 'Waschmaschine läuft_' activated, but not meeting conditions (triggerStateVal 'in action' != stateObject.val 'standby' ), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:04.406	debug	Trigger 'Waschmaschine aus_' activated, but not meeting conditions (triggerStateVal 'switched off' != stateObject.val 'standby' ), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:04.405	debug	Trigger [Waschmaschine Fertig_] Zone(s) will not be activated since no zone found which meets all conditions.

smartcontrol.0
2025-10-01 12:52:04.405	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'device-reminder.0.Waschmaschiene.Status' changed.

smartcontrol.0
2025-10-01 12:52:04.405	debug	State Change: ACCEPTED – state 'device-reminder.0.Waschmaschiene.Status' change: ack 'true' - "Real" adapter state (device-reminder.0.Waschmaschiene.Status) requires ack:true

smartcontrol.0
2025-10-01 12:52:04.117	debug	State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:04.117	debug	State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true.

smartcontrol.0
2025-10-01 12:52:04.068	debug	State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:04.068	debug	State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true.

smartcontrol.0
2025-10-01 12:52:04.067	info	Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG.

smartcontrol.0
2025-10-01 12:52:04.066	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer.

smartcontrol.0
2025-10-01 12:52:04.064	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:04.064	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:04.064	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:04.061	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:04.061	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:04.061	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:03.989	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer).

smartcontrol.0
2025-10-01 12:52:03.989	debug	State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:03.989	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully.

smartcontrol.0
2025-10-01 12:52:03.989	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue'

smartcontrol.0
2025-10-01 12:52:03.989	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions ===

smartcontrol.0
2025-10-01 12:52:03.989	debug	Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:03.989	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed.

smartcontrol.0
2025-10-01 12:52:03.989	debug	State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true

smartcontrol.0
2025-10-01 12:52:03.989	debug	State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:03.989	debug	Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions.

smartcontrol.0
2025-10-01 12:52:03.988	debug	Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation.

smartcontrol.0
2025-10-01 12:52:03.988	debug	State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed.

smartcontrol.0
2025-10-01 12:52:03.988	debug	State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true

smartcontrol.0
2025-10-01 12:52:01.652	debug	[_asyncOnMessage] Configuration verification failed, 1 issue(s) found.

smartcontrol.0
2025-10-01 12:52:01.620	debug	[_asyncOnMessage] command 'Verify Adapter Configuration' received from admin/index_m.html. Verifying the configuration and sending the result back to index_m.html...

smartcontrol.0
2025-10-01 12:52:01.093	debug	State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:01.093	debug	State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true.

smartcontrol.0
2025-10-01 12:52:01.043	debug	State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified.

smartcontrol.0
2025-10-01 12:52:01.043	debug	State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true.

smartcontrol.0
2025-10-01 12:52:01.043	info	Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG.

smartcontrol.0
2025-10-01 12:52:01.042	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer.

smartcontrol.0
2025-10-01 12:52:01.039	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:01.039	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:01.039	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:01.036	debug	enum not identified

smartcontrol.0
2025-10-01 12:52:01.036	debug	State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed.

smartcontrol.0
2025-10-01 12:52:01.036	debug	State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration

smartcontrol.0
2025-10-01 12:52:00.983	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer).

smartcontrol.0
2025-10-01 12:52:00.982	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully.

smartcontrol.0
2025-10-01 12:52:00.982	debug	Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue'

smartcontrol.0
2025-10-01 12:52:00.982	debug	State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified.

[luft-post]

Hab jetzt mal mein Problem bei github gemeldet, ich hoffe dass wir da mein Problem auf die schliche kommen.

[luft-post]

Kann mir bitte jemand die Datenpunkte von den Crom's zeigen?

[crunchip]

@luft-post die gibt es nicht, nur deine Trigger Datenpunkte

[luft-post]

Hallo zusammen,
ich habe mein Problem gefunden und behoben, hier kurz meine Lösung

Symptom:
Nach Umzug (Pi 5) markiert SmartControl alle Cron-Ausdrücke (z. B. * * * * *) als ungültig.

Ursache:
Im ioBroker-Verzeichnis lag cron-parser 5.4.0 (ESM). Diese Version exportiert in CJS keine parseExpression-Funktion → die SmartControl-Validierung schlägt fehl.

Fix:
cd /opt/iobroker
npm rm cron-parser --silent
npm i cron-parser@4.9.0 --save-exact
iobroker upload smartcontrol
iobroker restart smartcontrol

Vielen Dank an alle für die Gute Unterstützung