NEWS
Test Adapter SmartControl 0.3.x-0.6.x Latest
-
@thomas-braun
im smartControl Adapter werden mir beim speichern die Zeitabhängigen Auslöser angemeckert (sieheBild).
Vor mein Systemumzug (Pi4 -> Pi5) würden diese nicht als Fehler ausgegeben.@luft-post deaktiviere die mal alle und mach einen Auslöser mit einer festen Uhrzeit z.b.22:30 oder verwende mal eine astrozeit
sind eigentlich die Datenpunkte unter
smartcontrol.0.info.astroTimesvorhanden -
@luft-post deaktiviere die mal alle und mach einen Auslöser mit einer festen Uhrzeit z.b.22:30 oder verwende mal eine astrozeit
sind eigentlich die Datenpunkte unter
smartcontrol.0.info.astroTimesvorhanden -
@luft-post sagte in Test Adapter SmartControl 0.3.x-0.6.x Latest:
in welchen Datenpunkt stehen den eigentlich die Zeit Auslöser (Crom) drin?
na genau da wie in deinem screen zu sehen
-
@luft-post sagte in Test Adapter SmartControl 0.3.x-0.6.x Latest:
in welchen Datenpunkt stehen den eigentlich die Zeit Auslöser (Crom) drin?
na genau da wie in deinem screen zu sehen
-
@luft-post was zeigt denn das log an, wenn du den Adapter auf debug stellst?
-
@luft-post was zeigt denn das log an, wenn du den Adapter auf debug stellst?
hier sagt er:
smartcontrol.0 2025-10-01 12:52:01.652 debug [_asyncOnMessage] Configuration verification failed, 1 issue(s) found.hier mal der gesamte log
smartcontrol.0 2025-10-01 12:52:14.450 debug State change 'device-reminder.0.Waschmaschiene.Status': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:14.450 debug Trigger 'Waschmaschine läuft_' activated, but not meeting conditions (triggerStateVal 'in action' != stateObject.val 'standby' ), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:14.450 debug Trigger 'Waschmaschine aus_' activated, but not meeting conditions (triggerStateVal 'switched off' != stateObject.val 'standby' ), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:14.450 debug Trigger [Waschmaschine Fertig_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:14.450 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'device-reminder.0.Waschmaschiene.Status' changed. smartcontrol.0 2025-10-01 12:52:14.449 debug State Change: ACCEPTED – state 'device-reminder.0.Waschmaschiene.Status' change: ack 'true' - "Real" adapter state (device-reminder.0.Waschmaschiene.Status) requires ack:true smartcontrol.0 2025-10-01 12:52:13.109 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:13.109 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:13.058 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:13.058 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:13.057 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:13.056 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:13.054 debug enum not identified smartcontrol.0 2025-10-01 12:52:13.054 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:13.053 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:13.049 debug enum not identified smartcontrol.0 2025-10-01 12:52:13.049 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:13.048 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:12.995 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:12.994 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions === smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:12.994 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed. smartcontrol.0 2025-10-01 12:52:12.994 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true smartcontrol.0 2025-10-01 12:52:12.994 debug State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:12.994 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed. smartcontrol.0 2025-10-01 12:52:12.994 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true smartcontrol.0 2025-10-01 12:52:10.081 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:10.081 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:10.069 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:10.069 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:10.069 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:10.067 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:10.055 debug enum not identified smartcontrol.0 2025-10-01 12:52:10.055 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:10.055 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:10.047 debug enum not identified smartcontrol.0 2025-10-01 12:52:10.046 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:10.046 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:09.981 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions === smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:09.981 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed. smartcontrol.0 2025-10-01 12:52:09.981 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true smartcontrol.0 2025-10-01 12:52:09.981 debug State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:09.981 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed. smartcontrol.0 2025-10-01 12:52:09.981 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true smartcontrol.0 2025-10-01 12:52:07.143 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:07.143 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:07.098 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:07.098 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:07.097 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:07.096 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:07.093 debug enum not identified smartcontrol.0 2025-10-01 12:52:07.093 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:07.093 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:07.089 debug enum not identified smartcontrol.0 2025-10-01 12:52:07.089 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:07.089 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:07.041 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions === smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:07.041 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed. smartcontrol.0 2025-10-01 12:52:07.041 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true smartcontrol.0 2025-10-01 12:52:07.041 debug State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:07.040 debug Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:07.040 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed. smartcontrol.0 2025-10-01 12:52:07.040 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true smartcontrol.0 2025-10-01 12:52:04.406 debug State change 'device-reminder.0.Waschmaschiene.Status': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:04.406 debug Trigger 'Waschmaschine läuft_' activated, but not meeting conditions (triggerStateVal 'in action' != stateObject.val 'standby' ), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:04.406 debug Trigger 'Waschmaschine aus_' activated, but not meeting conditions (triggerStateVal 'switched off' != stateObject.val 'standby' ), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:04.405 debug Trigger [Waschmaschine Fertig_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:04.405 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'device-reminder.0.Waschmaschiene.Status' changed. smartcontrol.0 2025-10-01 12:52:04.405 debug State Change: ACCEPTED – state 'device-reminder.0.Waschmaschiene.Status' change: ack 'true' - "Real" adapter state (device-reminder.0.Waschmaschiene.Status) requires ack:true smartcontrol.0 2025-10-01 12:52:04.117 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:04.117 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:04.068 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:04.068 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:04.067 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:04.066 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:04.064 debug enum not identified smartcontrol.0 2025-10-01 12:52:04.064 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:04.064 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:04.061 debug enum not identified smartcontrol.0 2025-10-01 12:52:04.061 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:04.061 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:03.989 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions === smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:03.989 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed. smartcontrol.0 2025-10-01 12:52:03.989 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true smartcontrol.0 2025-10-01 12:52:03.989 debug State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:03.988 debug Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:03.988 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed. smartcontrol.0 2025-10-01 12:52:03.988 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true smartcontrol.0 2025-10-01 12:52:01.652 debug [_asyncOnMessage] Configuration verification failed, 1 issue(s) found. smartcontrol.0 2025-10-01 12:52:01.620 debug [_asyncOnMessage] command 'Verify Adapter Configuration' received from admin/index_m.html. Verifying the configuration and sending the result back to index_m.html... smartcontrol.0 2025-10-01 12:52:01.093 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:01.093 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:01.043 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:01.043 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:01.043 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:01.042 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:01.039 debug enum not identified smartcontrol.0 2025-10-01 12:52:01.039 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:01.039 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:01.036 debug enum not identified smartcontrol.0 2025-10-01 12:52:01.036 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:01.036 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:00.983 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:00.982 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:00.982 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:00.982 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. -
hier sagt er:
smartcontrol.0 2025-10-01 12:52:01.652 debug [_asyncOnMessage] Configuration verification failed, 1 issue(s) found.hier mal der gesamte log
smartcontrol.0 2025-10-01 12:52:14.450 debug State change 'device-reminder.0.Waschmaschiene.Status': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:14.450 debug Trigger 'Waschmaschine läuft_' activated, but not meeting conditions (triggerStateVal 'in action' != stateObject.val 'standby' ), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:14.450 debug Trigger 'Waschmaschine aus_' activated, but not meeting conditions (triggerStateVal 'switched off' != stateObject.val 'standby' ), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:14.450 debug Trigger [Waschmaschine Fertig_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:14.450 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'device-reminder.0.Waschmaschiene.Status' changed. smartcontrol.0 2025-10-01 12:52:14.449 debug State Change: ACCEPTED – state 'device-reminder.0.Waschmaschiene.Status' change: ack 'true' - "Real" adapter state (device-reminder.0.Waschmaschiene.Status) requires ack:true smartcontrol.0 2025-10-01 12:52:13.109 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:13.109 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:13.058 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:13.058 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:13.057 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:13.056 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:13.054 debug enum not identified smartcontrol.0 2025-10-01 12:52:13.054 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:13.053 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:13.049 debug enum not identified smartcontrol.0 2025-10-01 12:52:13.049 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:13.048 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:12.995 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:12.994 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions === smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:12.994 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed. smartcontrol.0 2025-10-01 12:52:12.994 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true smartcontrol.0 2025-10-01 12:52:12.994 debug State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:12.994 debug Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:12.994 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed. smartcontrol.0 2025-10-01 12:52:12.994 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true smartcontrol.0 2025-10-01 12:52:10.081 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:10.081 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:10.069 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:10.069 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:10.069 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:10.067 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:10.055 debug enum not identified smartcontrol.0 2025-10-01 12:52:10.055 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:10.055 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:10.047 debug enum not identified smartcontrol.0 2025-10-01 12:52:10.046 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:10.046 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:09.981 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions === smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:09.981 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed. smartcontrol.0 2025-10-01 12:52:09.981 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true smartcontrol.0 2025-10-01 12:52:09.981 debug State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:09.981 debug Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:09.981 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed. smartcontrol.0 2025-10-01 12:52:09.981 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true smartcontrol.0 2025-10-01 12:52:07.143 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:07.143 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:07.098 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:07.098 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:07.097 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:07.096 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:07.093 debug enum not identified smartcontrol.0 2025-10-01 12:52:07.093 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:07.093 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:07.089 debug enum not identified smartcontrol.0 2025-10-01 12:52:07.089 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:07.089 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:07.041 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions === smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:07.041 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed. smartcontrol.0 2025-10-01 12:52:07.041 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true smartcontrol.0 2025-10-01 12:52:07.041 debug State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:07.041 debug Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:07.040 debug Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:07.040 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed. smartcontrol.0 2025-10-01 12:52:07.040 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true smartcontrol.0 2025-10-01 12:52:04.406 debug State change 'device-reminder.0.Waschmaschiene.Status': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:04.406 debug Trigger 'Waschmaschine läuft_' activated, but not meeting conditions (triggerStateVal 'in action' != stateObject.val 'standby' ), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:04.406 debug Trigger 'Waschmaschine aus_' activated, but not meeting conditions (triggerStateVal 'switched off' != stateObject.val 'standby' ), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:04.405 debug Trigger [Waschmaschine Fertig_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:04.405 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'device-reminder.0.Waschmaschiene.Status' changed. smartcontrol.0 2025-10-01 12:52:04.405 debug State Change: ACCEPTED – state 'device-reminder.0.Waschmaschiene.Status' change: ack 'true' - "Real" adapter state (device-reminder.0.Waschmaschiene.Status) requires ack:true smartcontrol.0 2025-10-01 12:52:04.117 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:04.117 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:04.068 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:04.068 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:04.067 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:04.066 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:04.064 debug enum not identified smartcontrol.0 2025-10-01 12:52:04.064 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:04.064 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:04.061 debug enum not identified smartcontrol.0 2025-10-01 12:52:04.061 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:04.061 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:03.989 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [FensterSkripMuteMode Grenztemperatur an] === check schedule conditions === smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger 'FensterSkripMuteMode Grenztemperatur aus' activated, but not meeting 'comparator' condition (trigger state val: '<10'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:03.989 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' changed. smartcontrol.0 2025-10-01 12:52:03.989 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.temperature_primary' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.temperature_primary) requires ack:true smartcontrol.0 2025-10-01 12:52:03.989 debug State change 'homepilot20.0.Sensor.1010017-32000064.sun_brightness': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:03.989 debug Trigger [Draußen Hell_] Zone(s) will not be activated since no zone found which meets all conditions. smartcontrol.0 2025-10-01 12:52:03.988 debug Trigger 'Draußen Dunkel_' activated, but not meeting 'comparator' condition (trigger state val: '<=15'), therefore, we disregard the activation. smartcontrol.0 2025-10-01 12:52:03.988 debug State Change: Trigger of tableTriggerMotion or tableTriggerDevices - Subscribed state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' changed. smartcontrol.0 2025-10-01 12:52:03.988 debug State Change: ACCEPTED – state 'homepilot20.0.Sensor.1010017-32000064.sun_brightness' change: ack 'true' - "Real" adapter state (homepilot20.0.Sensor.1010017-32000064.sun_brightness) requires ack:true smartcontrol.0 2025-10-01 12:52:01.652 debug [_asyncOnMessage] Configuration verification failed, 1 issue(s) found. smartcontrol.0 2025-10-01 12:52:01.620 debug [_asyncOnMessage] command 'Verify Adapter Configuration' received from admin/index_m.html. Verifying the configuration and sending the result back to index_m.html... smartcontrol.0 2025-10-01 12:52:01.093 debug State change 'javascript.0.FensterUeberwachungOG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:01.093 debug State 'javascript.0.FensterUeberwachungOG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenOG' set to true. smartcontrol.0 2025-10-01 12:52:01.043 debug State change 'javascript.0.FensterUeberwachungEG.MuteMode': 1 state change actions identified. smartcontrol.0 2025-10-01 12:52:01.043 debug State 'javascript.0.FensterUeberwachungEG.MuteMode' changed to '2' -> 'smartcontrol.0.targetDevices.FensterSkriptErinnerungStumschaltenEG' set to true. smartcontrol.0 2025-10-01 12:52:01.043 info Trigger [FensterSkripMuteMode Grenztemperatur an] activated Zone 'Fenster Erinnerung MuteMode AN'. Turned on: FensterSkriptErinnerungStumschaltenEG,FensterSkriptErinnerungStumschaltenOG. smartcontrol.0 2025-10-01 12:52:01.042 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'Always off after' time is set, so we do not set such timer. smartcontrol.0 2025-10-01 12:52:01.039 debug enum not identified smartcontrol.0 2025-10-01 12:52:01.039 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungOG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:01.039 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungOG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungOG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:01.036 debug enum not identified smartcontrol.0 2025-10-01 12:52:01.036 debug State Change: tableTargetDevices: on/off states - Subscribed state 'javascript.0.FensterUeberwachungEG.MuteMode' changed. smartcontrol.0 2025-10-01 12:52:01.036 debug State Change: ACCEPTED – state 'javascript.0.FensterUeberwachungEG.MuteMode' change: ack 'false' - User State (javascript.0.FensterUeberwachungEG.MuteMode) can be ack:true or ack:false per adapter configuration smartcontrol.0 2025-10-01 12:52:00.983 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' No 'On after x sec' time is set, so we do not set such delay (timer). smartcontrol.0 2025-10-01 12:52:00.982 debug Trigger [FensterSkripMuteMode Grenztemperatur an] - (1) rows in Zones table found and assigned execution table rows fetched successfully. smartcontrol.0 2025-10-01 12:52:00.982 debug Trigger [FensterSkripMuteMode Grenztemperatur an] Zone 'Fenster Erinnerung MuteMode AN' - 'Execute always is activated, so continue' smartcontrol.0 2025-10-01 12:52:00.982 debug State change 'homepilot20.0.Sensor.1010017-32000064.temperature_primary': 1 state change actions identified. -
Hab jetzt mal mein Problem bei github gemeldet, ich hoffe dass wir da mein Problem auf die schliche kommen.
-
@luft-post die gibt es nicht, nur deine Trigger Datenpunkte
-
@luft-post die gibt es nicht, nur deine Trigger Datenpunkte
Hallo zusammen,
ich habe mein Problem gefunden und behoben, hier kurz meine LösungSymptom:
Nach Umzug (Pi 5) markiert SmartControl alle Cron-Ausdrücke (z. B. * * * * *) als ungültig.Ursache:
Im ioBroker-Verzeichnis lag cron-parser 5.4.0 (ESM). Diese Version exportiert in CJS keine parseExpression-Funktion → die SmartControl-Validierung schlägt fehl.Fix:
cd /opt/iobroker
npm rm cron-parser --silent
npm i cron-parser@4.9.0 --save-exact
iobroker upload smartcontrol
iobroker restart smartcontrolVielen Dank an alle für die Gute Unterstützung
Support us
715
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge