Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[arteck]

@M-A-X sagte in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:

rror: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'

hättest einfach nur den Adapter stoppen sollen.. Stick kurz raus .. wieder rein.. und adapter starten ...

fettisch währe die Laube

wenn du jetzt noch node12 hast dann must alle neu kompilliert werden.. der @serialport wird dann ewntuell zicken also musst du den löschen

rm -R /opt/iobroker/node_modules/@serialport

und den Adapter neu von Git isntallieren

[M-A-X]

@arteck
Hey. Ich habe nodejs nur von 12.13 oder so auf 12.18 geupdatet. Da sollte das nicht nötig sein, oder?
Stoppen - raus - rein - starten probiere ich.
Musste ich früher nie machen. Hängt das mit 3.1.5 zusammen oder war bzw ist das Zufall?

[arteck]

@M-A-X das hängt mit der Firmware und dem Adapter zusammen bzw. dessen Abhängikeit.. der js-controller hat damit nix zu tun

passiert halt..Software ändert sich

wenn du nur 12.13 oder so auf 12.18 geupdatet gemacht hast .. dann ist alles gut..

[Kueppert]

@M-A-X hab ich hin und wieder auch schon mal...aber eher selten (alle 2-4 Monate mal)

[M-A-X]

Adapter stoppen, abklemmen, anschließen, Adapter starten hilft.
Ich hatte das Problem bis gestern noch nie :) dabei benutze ich den zigbee Stick schon bestimmt nen halbes Jahr. Deshalb hab ich gleich an das Update gedacht.
Danke fürs 'Mut machen' und die Ratschläge.

[JB_Sullivan]

Darf ich hier mal reingrätschen? Kann es sein, das die Seriell Port Problematik unter Node.js12.18 ALLE USB gekoppelten Geräte betrifft?

Ich habe nämlich auch mit 12.18 ein Problem mit rflink.
( https://forum.iobroker.net/topic/34318/rflink-nodejs12-18 )

Gibt es da ggf. auch für Windows User ein Workaround?

[arteck]

@JB_Sullivan ne das was schon unter 8 auch so..

[gifftstaub]

@arteck

ich habe die gleichen probleme, keine Chance.

nodejs -v && which nodejs && node -v && which node && npm -v && which npm && apt policy nodejs 
v12.18.0
/usr/bin/nodejs
v12.18.0
/usr/bin/node
6.14.4
/usr/bin/npm
nodejs:
  Installiert:           12.18.0-1nodesource1
  Installationskandidat: 12.18.0-1nodesource1
  Versionstabelle:
 *** 12.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_12.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     10.21.0~dfsg-1~deb10u1+rpi1 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

zigbee.0	2020-06-15 06:38:02.899	error	at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12
zigbee.0	2020-06-15 06:38:02.899	error	at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
zigbee.0	2020-06-15 06:38:02.899	error	at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49)
zigbee.0	2020-06-15 06:38:02.899	error	at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12)
zigbee.0	2020-06-15 06:38:02.899	error	at new Promise (<anonymous>)
zigbee.0	2020-06-15 06:38:02.899	error	at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71
zigbee.0	2020-06-15 06:38:02.899	error	at Generator.next (<anonymous>)
zigbee.0	2020-06-15 06:38:02.899	error	at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32)
zigbee.0	2020-06-15 06:38:02.899	error	(19322) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
zigbee.0	2020-06-15 06:38:02.898	error	(19322) Failed to start Zigbee
zigbee.0	2020-06-15 06:38:02.655	info	(19322) Starting Zigbee...

komisch ist auch obwohl der COM-Anschlussname angegeben wurde kommt immer diese fehlermeldung.

ich hoffe es gibt dafür abhilfe.

lg

[arteck]

@gifftstaub hmm ok.. ich schau mal .. muss erst mein DEV auf node 12 bringen

[gifftstaub]

@arteck

Probiert habe ich auch mit sudo rm -R /opt/iobroker/node_modules/@serialport und ein npm install serialport --build-from-source

npm install serialport --build-from-source

> @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings/build“ wird betreten
  CXX(target) Release/obj.target/bindings/src/serialport.o
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../../../nan/nan.h:56,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
In file included from ../src/serialport.h:6,
                 from ../src/serialport_unix.cpp:2:
../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/poller.o
In file included from ../src/poller.cpp:1:
../../../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
  CXX(target) Release/obj.target/bindings/src/serialport_linux.o
  SOLINK_MODULE(target) Release/obj.target/bindings.node
  COPY Release/bindings.node
make: Verzeichnis „/opt/iobroker/node_modules/iobroker.discovery/node_modules/@serialport/bindings/build“ wird verlassen

> @serialport/bindings@9.0.0 install /opt/iobroker/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird betreten
  CXX(target) Release/obj.target/bindings/src/serialport.o
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:56,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
In file included from ../src/serialport.h:6,
                 from ../src/serialport_unix.cpp:2:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/poller.o
In file included from ../src/poller.cpp:1:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
  CXX(target) Release/obj.target/bindings/src/serialport_linux.o
  SOLINK_MODULE(target) Release/obj.target/bindings.node
  COPY Release/bindings.node
make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird verlassen

> serialport@8.0.8 postinstall /opt/iobroker/node_modules/iobroker.discovery/node_modules/serialport
> node thank-you.js

Thank you for using serialport!
If you rely on this package, please consider supporting our open collective:
> https://opencollective.com/serialport/donate



> serialport@9.0.0 postinstall /opt/iobroker/node_modules/serialport
> node thank-you.js

Thank you for using serialport!
If you rely on this package, please consider supporting our open collective:
> https://opencollective.com/serialport/donate


npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.3 (node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.3: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.2 (node_modules/zigbee-herdsman-converters/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.1.2 (node_modules/zigbee-herdsman/node_modules/jest-haste-map/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.1.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.12 (node_modules/zigbee-herdsman/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.12: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

+ serialport@9.0.0
added 31 packages from 3 contributors and updated 1 package in 50.316s

49 packages are looking for funding
  run `npm fund` for details

trozdem die gleichen fehlermeldungen.

ich sehe gerade beim installieren des Adapters ergibt sich folgende Meldungen.

$ ./iobroker add zigbee  --host raspberrypi
NPM version: 6.14.5
npm install iobroker.zigbee@1.1.1 --loglevel error --prefix "/opt/iobroker" (System call)
In file included from ../src/./serialport.h:6,                 from ../src/serialport.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)                                                              ^
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {                              ^
In file included from ../../../nan/nan.h:54,                 from ../src/./serialport.h:6,                 from ../src/serialport.cpp:1:/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]       (node::addon_register_func) (regfunc),                          \                                           ^/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)   ^~~~~~~~~~~~~../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~
In file included from ../src/serialport.h:6,                 from ../src/serialport_unix.cpp:2:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)                                                              ^
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../src/poller.cpp:1:../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:../../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)                                                              ^
host.raspberrypi install adapter zigbee
upload [200] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/index_m.html index_m.html text/html
upload [150] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/philips_hue_lightbar.png img/philips_hue_lightbar.png image/png
upload [100] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/lifecontrol_lamp.png img/lifecontrol_lamp.png image/png
upload [90] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/jiawen.png img/jiawen.png image/png
upload [80] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/iluminize_511_040.png img/iluminize_511_040.png image/png
upload [70] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ikea_led1837r5.PNG img/ikea_led1837r5.PNG image/png
upload [60] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/hue_go.png img/hue_go.png image/png
upload [50] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/gledopto_bulb.png img/gledopto_bulb.png image/png
upload [40] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ewelink_MS01.png img/ewelink_MS01.png image/png
upload [30] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ctrl_neutral1.png img/ctrl_neutral1.png image/png
upload [20] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_switch.png img/aqara_switch.png image/png
upload [19] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_numan_body_sensor.png img/aqara_numan_body_sensor.png image/png
upload [18] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_curtain.png img/aqara_curtain.png image/png
upload [17] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/aqara_bulb.png img/aqara_bulb.png image/png
upload [16] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZWLD-100.png img/ZWLD-100.png image/png
upload [15] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS0218.png img/TS0218.png image/png
upload [14] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS0215.png img/TS0215.png image/png
upload [13] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTW017.png img/LTW017.png image/png
upload [12] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTC015.png img/LTC015.png image/png
upload [11] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LTC014.png img/LTC014.png image/png
upload [10] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/LCT002.png img/LCT002.png image/png
upload [9] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Ikea_fyrtur.png img/Ikea_fyrtur.png image/png
upload [8] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/FLOALT.panel.WS.png img/FLOALT.panel.WS.png image/png
upload [7] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Eurotronic_Spirit_04.png img/Eurotronic_Spirit_04.png image/png
upload [6] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/DIYRuZ.png img/DIYRuZ.png image/png
upload [5] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/Bitron_AV201021A.png img/Bitron_AV201021A.png image/png
upload [4] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/AV2010_32.png img/AV2010_32.png image/png
upload [3] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw2.png img/86sw2.png image/png
upload [2] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86sw1.png img/86sw1.png image/png
upload [1] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/img/86plug.png img/86plug.png image/png
upload [0] zigbee.admin /opt/iobroker/node_modules/iobroker.zigbee/admin/admin.js admin.js application/javascript
host.raspberrypi object system.adapter.zigbee created/updated
host.raspberrypi create instance zigbee
host.raspberrypi object zigbee.0.info.groups created
host.raspberrypi object zigbee.0.info.pairingMessage created
host.raspberrypi object zigbee.0.info.pairingCountdown created
host.raspberrypi object zigbee.0.info.pairingMode created
host.raspberrypi object zigbee.0.info.connection created
host.raspberrypi object zigbee.0.info created
host.raspberrypi object system.adapter.zigbee.0.sigKill created
host.raspberrypi object system.adapter.zigbee.0.eventLoopLag created
host.raspberrypi object system.adapter.zigbee.0.outputCount created
host.raspberrypi object system.adapter.zigbee.0.inputCount created
host.raspberrypi object system.adapter.zigbee.0.uptime created
host.raspberrypi object system.adapter.zigbee.0.memRss created
host.raspberrypi object system.adapter.zigbee.0.memHeapTotal created
host.raspberrypi object system.adapter.zigbee.0.memHeapUsed created
host.raspberrypi object system.adapter.zigbee.0.cputime created
host.raspberrypi object system.adapter.zigbee.0.cpu created
host.raspberrypi object system.adapter.zigbee.0.compactMode created
host.raspberrypi object system.adapter.zigbee.0.connected created
host.raspberrypi object system.adapter.zigbee.0.alive created
host.raspberrypi Set default value of zigbee.0.info.groups: 
host.raspberrypi Set default value of zigbee.0.info.pairingMessage: 
host.raspberrypi Set default value of zigbee.0.info.pairingCountdown: 0
host.raspberrypi Set default value of zigbee.0.info.pairingMode: false
host.raspberrypi Set default value of zigbee.0.info.connection: false
host.raspberrypi object system.adapter.zigbee.0 created
process exited with code 0

lg

[gifftstaub]

Push

Ich habe nun folgendes gemacht.

pi@raspberrypi:/opt/iobroker/node_modules/serialport $ npm install --production 

> @serialport/bindings@8.0.8 install /opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings
> prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild

prebuild-install WARN install No prebuilt binaries found (target=12.18.0 runtime=node arch=arm libc= platform=linux)
make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird betreten
  CXX(target) Release/obj.target/bindings/src/serialport.o
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
                                                                    ^~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../../nan/nan.h:56,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:608:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/home/iobroker/.cache/node-gyp/12.18.0/include/node/node.h:642:3: note: in expansion of macro ‘NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/serialport_unix.o
In file included from ../src/serialport.h:6,
                 from ../src/serialport_unix.cpp:2:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  CXX(target) Release/obj.target/bindings/src/poller.o
In file included from ../src/poller.cpp:1:
../../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../../nan/nan.h:2294:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
  CXX(target) Release/obj.target/bindings/src/serialport_linux.o
  SOLINK_MODULE(target) Release/obj.target/bindings.node
  COPY Release/bindings.node
make: Verzeichnis „/opt/iobroker/node_modules/serialport/node_modules/@serialport/bindings/build“ wird verlassen

> serialport@8.0.8 postinstall /opt/iobroker/node_modules/serialport
> node thank-you.js

Thank you for using serialport!
If you rely on this package, please consider supporting our open collective:
> https://opencollective.com/serialport/donate


npm notice created a lockfile as package-lock.json. You should commit this file.
added 73 packages from 43 contributors and audited 78 packages in 16.172s

1 package is looking for funding
  run `npm fund` for details

found 0 vulnerabilities

pi@raspberrypi:/opt/iobroker/node_modules/serialport $ npm fund
serialport@8.0.8
└─┬ https://github.com/sponsors/sindresorhus
  └── mimic-response@2.1.0

liegt das Problem an der 12.18.0?

prebuild-install WARN install No prebuilt binaries found (target=12.18.0 runtime=node arch=arm libc= platform=linux)

lg

[Thomas Braun]

@gifftstaub
Nein, mit 12.18.0 hat das grundsätzlich nichts zu tun, denn:

pi@raspberrypi:/opt/iobroker $ nodejs -v
v12.18.0

pi@raspberrypi:/opt/iobroker $ npm ls serialport
iobroker.inst@2.0.3 /opt/iobroker
├─┬ iobroker.discovery@2.3.7
│ └── serialport@8.0.8
└─┬ iobroker.zigbee@1.1.1
  └─┬ zigbee-herdsman@0.12.83
    └── serialport@8.0.7

[gifftstaub]

@Thomas-Braun

könnte der Stick defekt sein?

pi@raspberrypi:/opt/iobroker $ npm ls serialport
iobroker.inst@2.0.3 /opt/iobroker
├─┬ iobroker.discovery@2.3.7
│ └── serialport@8.0.8 
└─┬ iobroker.zigbee@1.0.0
  └─┬ zigbee-herdsman@0.12.95
    └── serialport@8.0.7 

lg

[Thomas Braun]

@gifftstaub
Hast du eigentlich im Raspberry auch den Serialport in

sudo raspi-config

aktiviert?

Geht unter 5 - P6 - No - Yes

[gifftstaub]

@Thomas-Braun

eingentlich ja am serialport war ich nocch nie dran.

ich habe das mal proformer gemacht wie du beschrieben hast, nach einem reboot immer noch die gleichen Meldungen.

zigbee.0	2020-06-16 14:21:14.793	error	at /opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:242:12
zigbee.0	2020-06-16 14:21:14.793	error	at SerialPort._error (/opt/iobroker/node_modules/zigbee-herdsman/node_modules/@serialport/stream/lib/index.js:198:14)
zigbee.0	2020-06-16 14:21:14.793	error	at SerialPort.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:111:49)
zigbee.0	2020-06-16 14:21:14.793	error	at __awaiter (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:4:12)
zigbee.0	2020-06-16 14:21:14.793	error	at new Promise (<anonymous>)
zigbee.0	2020-06-16 14:21:14.793	error	at /opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:8:71
zigbee.0	2020-06-16 14:21:14.793	error	at Generator.next (<anonymous>)
zigbee.0	2020-06-16 14:21:14.793	error	at Znp.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/adapter/z-stack/znp/znp.js:113:32)
zigbee.0	2020-06-16 14:21:14.793	error	(2686) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'
zigbee.0	2020-06-16 14:21:14.792	error	(2686) Failed to start Zigbee
zigbee.0	2020-06-16 14:21:14.554	info	(2686) Starting Zigbee...

lg

[Thomas Braun]

@gifftstaub sagte in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:

zigbee.0 2020-06-16 14:21:14.793 error (2686) Error: Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'

Da greift wohl schon irgendwas anderes drauf zu. Hast du noch deConz parallel laufen?

[gifftstaub]

@Thomas-Braun

nein nur zigbee

[gifftstaub]

liste der Installierten Adapter

Used repository: latest
hash unchanged, use cached sources
update done
Adapter    "accuweather"   : 1.1.3    
Adapter    "admin"         : 4.1.1    , installed 4.1.1
Adapter    "alarm"         : 0.7.5    
Adapter    "alexa2"        : 3.1.2    , installed 3.1.2
Adapter    "alpha2"        : 1.0.0    
Adapter    "amazon-dash"   : 1.1.0    
Adapter    "artnet"        : 1.2.2    
Adapter    "asterisk"      : 1.0.6    
Adapter    "asuswrt"       : 1.0.1    
Adapter    "b-control-em"  : 0.2.1    
Adapter    "backitup"      : 1.5.8    , installed 1.5.8
Adapter    "beckhoff"      : 1.2.2    
Adapter    "benq"          : 0.2.2    
Adapter    "binance"       : 1.1.2    
Adapter    "ble"           : 0.11.6   
Adapter    "blink4home"    : 0.1.1    
Adapter    "bmw"           : 1.4.0    
Adapter    "boblight"      : 0.0.1    
Adapter    "bosesoundtouch": 0.9.2    
Adapter    "botvac"        : 1.0.0    
Adapter    "bring"         : 1.7.2    
Adapter    "broadlink2"    : 2.0.3    
Adapter    "bsblan"        : 0.1.2    
Adapter    "bshb"          : 0.1.10   
Adapter    "calendar"      : 1.2.0    
Adapter    "cameras"       : 0.1.2    
Adapter    "chromecast"    : 2.3.1    
Adapter    "cloud"         : 3.0.3    
Adapter    "comfoair"      : 1.1.1    
Adapter    "contact"       : 1.1.3    
Adapter    "contactid"     : 1.0.0    
Adapter    "coronavirus-statistics": 0.5.9   
Adapter    "corrently"     : 0.0.2    
Adapter    "countdown"     : 1.1.0    
Adapter    "cul"           : 1.2.1    
Adapter    "daikin"        : 1.0.5    
Adapter    "daswetter"     : 3.0.1    
Adapter    "deconz"        : 1.3.9    
Adapter    "denon"         : 1.7.7    
Adapter    "devices"       : 0.3.6    
Adapter    "digitalstrom"  : 2.0.5    
Adapter    "discovergy"    : 0.5.4    
Adapter    "discovery"     : 2.3.7    , installed 2.3.7
Adapter    "doorbird"      : 0.1.5    
Adapter    "ds18b20"       : 1.1.4    
Adapter    "dwd"           : 2.4.10   
Adapter    "ebus"          : 2.0.0    
Adapter    "ecovacs-deebot": 1.0.3    
Adapter    "egigeozone"    : 0.1.2    
Adapter    "ekey"          : 1.1.0    
Adapter    "email"         : 1.0.7    , installed 1.0.7
Adapter    "emby"          : 1.0.2    
Adapter    "energymanager" : 1.2.2    
Adapter    "enet"          : 1.0.1    
Adapter    "epson_stylus_px830": 0.2.1   
Adapter    "exchangerates" : 0.0.13   
Adapter    "fakeroku"      : 0.2.1    
Adapter    "fb-checkpresence": 1.0.3   
Adapter    "feiertage"     : 1.0.19   
Adapter    "fhem"          : 1.5.2    
Adapter    "find-my-iphone": 0.2.17   
Adapter    "firetv"        : 1.0.0    
Adapter    "fitbit-api"    : 0.1.1    
Adapter    "flot"          : 1.10.0   
Adapter    "foobar2000"    : 2.0.3    
Adapter    "fritzbox"      : 0.2.1    
Adapter    "fritzdect"     : 0.3.2    
Adapter    "fronius"       : 1.0.5    
Adapter    "fullcalendar"  : 1.1.0    
Adapter    "fullybrowser"  : 1.0.3    
Adapter    "g-homa"        : 0.5.3    
Adapter    "geofency"      : 0.3.2    
Adapter    "gruenbeck"     : 0.0.18   
Adapter    "habpanel"      : 0.4.1    
Adapter    "haier"         : 1.0.3    
Adapter    "ham"           : 1.1.2    
Adapter    "ham-wemo"      : 1.0.1    
Adapter    "harmony"       : 1.2.2    
Adapter    "hass-mqtt"     : 0.0.7    
Adapter    "heatingcontrol": 0.5.6    
Adapter    "heytech"       : 0.2.0    
Adapter    "hid"           : 0.1.17   
Adapter    "hilink"        : 0.2.7    
Adapter    "history"       : 1.9.8    , installed 1.9.8
Adapter    "hm-rega"       : 2.6.14   
Adapter    "hm-rpc"        : 1.14.10  
Adapter    "hmip"          : 1.0.1    
Adapter    "hombot"        : 0.1.3    
Adapter    "homeconnect"   : 0.0.30   
Adapter    "homee"         : 1.0.7    
Adapter    "homepilot"     : 1.1.4    
Adapter    "hp-ilo"        : 1.0.5    
Adapter    "hs100"         : 2.0.0    
Adapter    "hue"           : 3.3.5    
Adapter    "hue-extended"  : 1.3.2    
Adapter    "hyperion"      : 0.0.9    
Adapter    "i2c"           : 0.0.6    
Adapter    "ical"          : 1.7.0    , installed 1.7.0
Adapter    "icons-addictive-flavour-png": 0.1.0   
Adapter    "icons-fatcow-hosting": 0.1.0   
Adapter    "icons-icons8"  : 0.0.1    
Adapter    "icons-material-png": 0.1.0   
Adapter    "icons-material-svg": 0.1.0   
Adapter    "icons-mfd-png" : 1.0.2    
Adapter    "icons-mfd-svg" : 1.0.2    
Adapter    "icons-open-icon-library-png": 0.1.2   
Adapter    "icons-ultimate-png": 1.0.1   
Adapter    "influxdb"      : 1.8.6    
Adapter    "info"          : 1.7.5    , installed 1.7.5
Adapter    "innogy-smarthome": 0.3.4   
Adapter    "intesishome"   : 0.1.2    
Adapter    "iogo"          : 0.5.10   
Adapter    "iot"           : 1.5.3    , installed 1.5.3
Adapter    "iqontrol"      : 1.1.0    , installed 1.1.0
Adapter    "javascript"    : 4.6.17   , installed 4.6.17
Adapter    "jeelink"       : 0.1.3    
Controller "js-controller" : 3.1.5    , installed 3.1.5
Adapter    "js2fs"         : 0.1.5    
Adapter    "kecontact"     : 0.1.0    
Adapter    "klf200"        : 0.9.5    
Adapter    "km200"         : 2.0.3    
Adapter    "knmi-weather"  : 0.2.0    
Adapter    "knx"           : 1.0.41   
Adapter    "kodi"          : 2.0.4    
Adapter    "kress"         : 2.5.5    
Adapter    "lametric"      : 0.0.9    
Adapter    "landroid"      : 1.0.3    
Adapter    "lcn"           : 0.6.3    
Adapter    "legrand-ecocompteur": 0.0.4   
Adapter    "letrika_comgw" : 0.0.5    
Adapter    "lgtv"          : 1.1.6    
Adapter    "lgtv-rs"       : 0.1.0    
Adapter    "lgtv11"        : 1.0.5    
Adapter    "lifx"          : 0.1.1    
Adapter    "lightify"      : 0.2.16   
Adapter    "link"          : 0.5.9    
Adapter    "linkeddevices" : 1.1.4    
Adapter    "logparser"     : 0.4.11   
Adapter    "lovelace"      : 1.1.0    
Adapter    "loxone"        : 1.0.0    
Adapter    "luftdaten"     : 0.0.15   
Adapter    "lupusec"       : 1.2.7    
Adapter    "luxtronik1"    : 0.2.3    
Adapter    "material"      : 0.13.8   
Adapter    "maxcube"       : 0.1.2    
Adapter    "maxcul"        : 1.3.0    
Adapter    "mbus"          : 2.2.0    
Adapter    "mclighting"    : 0.1.1    
Adapter    "megad"         : 1.2.1    
Adapter    "megadd"        : 0.2.0    
Adapter    "megaesp"       : 0.1.0    
Adapter    "mercedesme"    : 0.0.21   
Adapter    "mercury"       : 0.1.1    
Adapter    "meross"        : 1.4.1    
Adapter    "meteoalarm"    : 1.1.0    
Adapter    "midea"         : 0.0.6    
Adapter    "miele"         : 0.1.5    
Adapter    "mielecloudservice": 1.2.4   
Adapter    "mihome"        : 1.3.0    
Adapter    "mihome-airpurifier": 0.1.8   
Adapter    "mihome-lamp"   : 1.1.0    
Adapter    "mihome-plug"   : 0.2.1    
Adapter    "mihome-vacuum" : 2.0.7    
Adapter    "miio"          : 0.0.13   
Adapter    "mikrotik"      : 1.0.12   
Adapter    "milight"       : 0.3.6    
Adapter    "milight-smart-light": 0.6.0   
Adapter    "mobile"        : 0.5.0    
Adapter    "modbus"        : 3.1.3    
Adapter    "moma"          : 1.2.6    
Adapter    "mpd"           : 1.0.5    
Adapter    "mqtt"          : 2.1.3    
Adapter    "mqtt-client"   : 1.3.1    
Adapter    "multicast"     : 0.1.5    
Adapter    "musiccast"     : 0.1.3    
Adapter    "mydlink"       : 1.1.2    
Adapter    "myq"           : 0.1.1    
Adapter    "mysensors"     : 2.0.1    
Adapter    "myvbus"        : 0.0.6    
Adapter    "nanoleaf-lightpanels": 0.8.2   
Adapter    "nello"         : 2.0.8    
Adapter    "netatmo"       : 1.3.1    
Adapter    "nibeuplink"    : 0.3.0    
Adapter    "nina"          : 0.0.23   
Adapter    "node-red"      : 1.17.2   
Adapter    "noolitef"      : 0.0.2    
Adapter    "nuki"          : 1.2.3    
Adapter    "nuki-extended" : 2.2.5    , installed 2.2.5
Adapter    "nut"           : 1.1.3    
Adapter    "octoprint"     : 0.0.4    
Adapter    "odl"           : 1.0.5    
Adapter    "oilfox"        : 2.1.0    
Adapter    "onkyo"         : 2.0.3    
Adapter    "onvif"         : 0.4.3    
Adapter    "openhab"       : 1.1.0    
Adapter    "openligadb"    : 1.2.0    
Adapter    "opentherm"     : 0.1.9    
Adapter    "openweathermap": 0.1.0    
Adapter    "opi"           : 0.1.1    
Adapter    "oppoplayer"    : 0.2.1    
Adapter    "owfs"          : 0.6.4    
Adapter    "owntracks"     : 0.6.3    
Adapter    "panasonic-viera": 1.0.2   
Adapter    "parser"        : 1.0.7    
Adapter    "paw"           : 0.3.2    
Adapter    "phantomjs"     : 1.0.1    
Adapter    "pi-hole"       : 1.2.3    
Adapter    "piface"        : 1.0.0    
Adapter    "pimatic"       : 0.3.0    
Adapter    "ping"          : 1.4.7    
Adapter    "places"        : 0.7.0    
Adapter    "plenticore"    : 2.1.3    
Adapter    "plex"          : 0.8.11   
Adapter    "plexconnect"   : 0.0.7    
Adapter    "pollenflug"    : 1.0.6    
Adapter    "primelab"      : 1.0.2    
Adapter    "proxmox"       : 1.0.2    
Adapter    "proxy"         : 1.2.1    
Adapter    "pushbullet"    : 0.0.11   
Adapter    "pushover"      : 2.0.2    
Adapter    "pushsafer"     : 0.1.8    
Adapter    "radar2"        : 2.0.1    
Adapter    "radiohead"     : 1.0.7    
Adapter    "rainbird"      : 0.2.2    
Adapter    "rflink"        : 2.1.5    
Adapter    "rickshaw"      : 1.0.0    
Adapter    "ring"          : 1.1.3    
Adapter    "roadtraffic"   : 0.2.0    
Adapter    "robonect"      : 0.1.3    
Adapter    "roomba"        : 1.1.1    
Adapter    "rpi2"          : 1.2.0    , installed 1.2.0
Adapter    "rssfeed"       : 0.0.28   
Adapter    "s7"            : 1.1.8    
Adapter    "samsung"       : 0.2.9    
Adapter    "sanext"        : 0.0.4    
Adapter    "sayit"         : 1.9.8    
Adapter    "sbfspot"       : 3.0.0    
Adapter    "scenes"        : 2.0.7    , installed 1.1.0 [Updateable]
Adapter    "schoolfree"    : 0.6.2    
Adapter    "senec"         : 1.0.9    
Adapter    "shelly"        : 3.3.1    
Adapter    "shuttercontrol": 0.6.2    
Adapter    "sia"           : 1.0.4    
Adapter    "siegenia"      : 1.0.0    
Adapter    "simple-api"    : 2.4.6    , installed 2.4.6
Adapter    "sma-em"        : 0.5.7    
Adapter    "smappee"       : 0.2.2    
Adapter    "smartmeter"    : 3.1.2    
Adapter    "snips"         : 1.5.0    
Adapter    "snmp"          : 0.5.0    
Adapter    "socketio"      : 3.0.9    , installed 3.0.9
Adapter    "solarlog"      : 2.0.0    
Adapter    "solarviewdatareader": 0.2.1   
Adapter    "solarwetter"   : 1.0.0    
Adapter    "sonnen"        : 1.5.2    
Adapter    "sonoff"        : 2.3.3    , installed 2.3.3
Adapter    "sonos"         : 2.1.0    , installed 2.1.0
Adapter    "sonus"         : 0.1.1    
Adapter    "sony-bravia"   : 1.0.1    
Adapter    "sourceanalytix": 0.4.2    
Adapter    "spotify-premium": 1.0.0   
Adapter    "sql"           : 1.13.1   
Adapter    "squeezebox"    : 1.0.0    
Adapter    "squeezeboxrpc" : 1.2.1    
Adapter    "starline"      : 1.0.0    
Adapter    "statistics"    : 0.2.2    
Adapter    "stiebel-isg"   : 1.4.11   
Adapter    "stockmarket"   : 0.0.2    
Adapter    "sunnyportal"   : 0.1.5    
Adapter    "swiss-weather-api": 0.2.0   
Adapter    "synology"      : 0.1.18   
Adapter    "systeminfo"    : 0.3.1    
Adapter    "tado"          : 0.1.9    
Adapter    "tahoma"        : 0.3.3    
Adapter    "tankerkoenig"  : 2.0.9    
Adapter    "telegram"      : 1.5.9    , installed 1.5.9
Adapter    "terminal"      : 0.1.2    
Adapter    "tesla-motors"  : 0.2.3    
Adapter    "text2command"  : 1.3.0    , installed 1.3.0
Adapter    "tileboard"     : 0.1.1    
Adapter    "tinker"        : 1.1.0    
Adapter    "tino"          : 0.1.3    
Adapter    "tinyrx4"       : 0.1.5    
Adapter    "tr-064"        : 4.0.7    
Adapter    "tradfri"       : 2.6.3    
Adapter    "trashschedule" : 0.0.9    , installed 0.0.9
Adapter    "tunnelbroker-endpoint-updater": 0.0.1   
Adapter    "tuya"          : 3.3.5    
Adapter    "tvspielfilm"   : 2.0.1    
Adapter    "unifi"         : 0.5.5    
Adapter    "unifi-protect" : 0.0.11   
Adapter    "upnp"          : 1.0.16   
Adapter    "vaillant"      : 0.0.10   
Adapter    "valloxmv"      : 1.0.3    
Adapter    "vcard"         : 0.0.9    
Adapter    "vedirect"      : 0.1.0    
Adapter    "velux"         : 0.0.6    
Adapter    "viessmann"     : 1.2.4    
Adapter    "viessmannapi"  : 1.3.2    
Adapter    "virtualpowermeter": 1.2.1   
Adapter    "vis"           : 1.2.6    , installed 1.2.6
Adapter    "vis-bars"      : 0.1.4    
Adapter    "vis-canvas-gauges": 0.1.5   
Adapter    "vis-colorpicker": 1.2.0   
Adapter    "vis-fancyswitch": 1.1.0   
Adapter    "vis-google-fonts": 0.1.0   
Adapter    "vis-history"   : 1.0.0    
Adapter    "vis-hqwidgets" : 1.1.4    , installed 1.1.4
Adapter    "vis-inventwo"  : 1.3.8    
Adapter    "vis-jqui-mfd"  : 1.0.12   
Adapter    "vis-justgage"  : 1.0.2    
Adapter    "vis-keyboard"  : 0.0.2    
Adapter    "vis-lcars"     : 1.0.4    
Adapter    "vis-map"       : 1.0.4    
Adapter    "vis-material"  : 0.1.3    
Adapter    "vis-material-webfont": 0.0.3   
Adapter    "vis-materialdesign": 0.3.14  
Adapter    "vis-metro"     : 1.1.2    
Adapter    "vis-players"   : 0.1.6    
Adapter    "vis-plumb"     : 1.0.2    
Adapter    "vis-rgraph"    : 0.0.2    
Adapter    "vis-timeandweather": 1.1.7   
Adapter    "vis-weather"   : 2.5.2    
Adapter    "vodafone-speedtest": 0.0.5   
Adapter    "volvo"         : 0.0.2    
Adapter    "vr200"         : 1.0.0    
Adapter    "vw-connect"    : 0.0.16   
Adapter    "weatherunderground": 3.2.1   
Adapter    "web"           : 3.0.9    , installed 3.0.9
Adapter    "web-speedy"    : 0.2.0    
Adapter    "weishaupt-wem" : 0.0.8    
Adapter    "wiffi-wz"      : 2.2.0    
Adapter    "wifilight"     : 1.1.0    
Adapter    "windows-control": 0.1.3   
Adapter    "wlanthermo-nano": 0.1.1   
Adapter    "wled"          : 0.5.0    
Adapter    "wm-bus"        : 0.3.1    
Adapter    "wolf"          : 1.2.0    
Adapter    "worx"          : 1.0.2    
Adapter    "xbox"          : 0.6.5    
Adapter    "xs1"           : 1.0.2    
Adapter    "yahka"         : 0.11.0   
Adapter    "yamaha"        : 0.3.19   
Adapter    "yeelight-2"    : 1.0.3    
Adapter    "youtube"       : 0.0.11   
Adapter    "yr"            : 2.0.3    
Adapter    "zigbee"        : 1.1.1    , installed 1.1.1
Adapter    "zoneminder"    : 0.3.3    
Adapter    "zont"          : 0.5.4    
Adapter    "zwave"         : 2.0.1    
Adapter    "zwave2"        : 1.3.3 

da ist auch nichts dabei was mein usb blockieren sollte.

lg

[Thomas Braun]

@gifftstaub
Deaktivier mal den 'discovery' Adapter. Soweit ich weiß fragt der auch den serialport an.

[gifftstaub]

@Thomas-Braun said in Zigbee Adapter Fehler nach Update auf JS-Controller 3.1.5:

@gifftstaub
Deaktivier mal den 'discovery' Adapter. Soweit ich weiß fragt der auch den serialport an.

nein das liegt nicht am 'discovery' Adapter Serial ist nicht angehackt.

lg

Edit: Morgen kommt ein neuer USB Stick bericht folgt.