Test Adapter HeatingControl v2.12.x
-
Ich habe noch eine weitere Frage. Ich habe nur einen Raum indem ich am Montag eine andere Temperatur haben möchte als den Rest der Woche. Alle anderen Räume sollen immer auf einer gleichbleibenden Temp gehalten werden. Ist das möglich? Die Profile werden immer für alle Räume aktiviert, oder?
-
bei wird folgender Datenpunkt nicht gefüllt, woran könnte das liegen?
Zusätzlich bekomme ich folgende Warnmeldung und der Adapter geht auf Rot:
heatingcontrol.0 2020-03-23 12:20:22.639 warn (30153) more then 100 cron jobs existing for this adapter, this might be a configuration error! -
@Oli sagte in Test Adapter HeatingControl v0.3.x:
folgende Warnmeldun
Die Warnung ist wirklich nur eine Warnung und kein Fehler. Das führt auch nicht dazu, dass der Adapter "rot" wird.
Poste doch mal das ganze log vom adapter. -
@Bastelritius ich würde dafür Profil-Type "jeden Tag separat" verwenden und dafür Anzahl Perioden auf 1 (oder 2). Am Montag z.Bsp. 3:00 Uhr schaltest du auf deine Montagstemperatur. Am Dienstag (und den Rest der Woche) schaltest du ebenfalls um 3:00 Uhr auf die zweite Temperatur.
Das ganze gilt dann natürlich für alle Räume. -
@Rene_HM : Ok, so hatte ich das auch verstanden. ich finde es nur umständlich dann alles für jeden Raum zu ändern. Falls man mal 1 grad erhöhen will, muss mann das dann immer im gesamten Profil machen. Die Anzahl der Heizpläne seperat für Raum zu definieren würde ich besser finden. Evtl. kann das ja als Wunsch aufgenommen werden
-
@Bastelritius sagte in Test Adapter HeatingControl v0.3.x:
Falls man mal 1 grad erhöhen will, muss mann das dann immer im gesamten Profil machen.
Dafür kann man doch z.B. die Gäste Anhebung verwenden. Erhöhung 1 Grad einstellen und Gäste Modus aktivieren und schon is der Käs bissn.
-
Hi,
bei uns haben wir im Haus einige Räume gewechselt (Arbeitszimmer, Spielzimmer und Kinderschlafzimmer wurden durch getauscht). Kann ich die in den Einstellungen einfach umbenennen oder führt das zu größeren Problemen ?Ciao
Martin -
@martinschm müsste gehen, wenn sich die Zuordnung der Geräte nicht geändert hat. Die Profile/Perioden musst du aber anpassen..
-
der Adapter bleibt nach einem Neustart jetzt grün, Die Datenpunkte "ActiveTimeSlot" werden aber leider immer noch nicht befüllt.
Ist das noch ein Fehler, oder woran könnte das liegen?
-
@Oli ohne debug-log schwer zu sagen...
-
-
@Oli sagte in Test Adapter HeatingControl v0.3.x:
no heating period
schalte mal deine Heizungsperiode ein...
-
@Oli @Rene_HM ich hab selben Fehler wie Oli
(5321) more then 100 cron jobs existing for this adapter, this might be a configuration error!
heatingcontrol.0 2020-03-26 20:02:34.546 debug (27615) #subscribtion finished heatingcontrol.0 2020-03-26 20:02:34.546 debug (27615) no subscribe Path2PartyNowDP heatingcontrol.0 2020-03-26 20:02:34.545 debug (27615) no subscribe Path2GuestsPresentDP heatingcontrol.0 2020-03-26 20:02:34.545 debug (27615) no subscribe Path2HolidayPresentDP heatingcontrol.0 2020-03-26 20:02:34.545 debug (27615) no subscribe Path2VacationDP heatingcontrol.0 2020-03-26 20:02:34.545 debug (27615) no subscribe Path2PresentDP heatingcontrol.0 2020-03-26 20:02:34.544 info (27615) subscribe feiertage.0.heute.boolean heatingcontrol.0 2020-03-26 20:02:34.539 debug (27615) #start subscribtion heatingcontrol.0 2020-03-26 20:02:34.538 debug (27615) [INFO] status = true next event: 29 Mar 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:34.267 debug (27615) [INFO] status = true next event: 29 Mar 2020 08:30:00 heatingcontrol.0 2020-03-26 20:02:33.996 debug (27615) [INFO] status = true next event: 28 Mar 2020 22:00:00 heatingcontrol.0 2020-03-26 20:02:33.994 debug (27615) [INFO] status = true next event: 28 Mar 2020 08:30:00 heatingcontrol.0 2020-03-26 20:02:33.992 debug (27615) [INFO] status = true next event: 27 Mar 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:33.989 debug (27615) [INFO] status = true next event: 27 Mar 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:33.985 debug (27615) [INFO] status = true next event: 26 Mar 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:33.982 debug (27615) [INFO] status = true next event: 2 Apr 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:33.979 debug (27615) [INFO] status = true next event: 1 Apr 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:33.976 debug (27615) [INFO] status = true next event: 1 Apr 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:33.973 debug (27615) [INFO] status = true next event: 31 Mar 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:33.969 debug (27615) [INFO] status = true next event: 31 Mar 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:33.967 debug (27615) [INFO] status = true next event: 30 Mar 2020 21:46:00 heatingcontrol.0 2020-03-26 20:02:33.963 debug (27615) [INFO] status = true next event: 30 Mar 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:33.049 debug (27615) thermostat fritzdect.0.Comet_133560281368.targettemp nothing to do, already 20 heatingcontrol.0 2020-03-26 20:02:33.039 debug (27615) got {"val":10,"ack":true,"ts":1584810994712,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584810994708} heatingcontrol.0 2020-03-26 20:02:33.012 debug (27615) checking min temp with Rooms.Wohnzimmer.MinimumTemperature heatingcontrol.0 2020-03-26 20:02:33.011 debug (27615) room Wohnzimmer Thermostat Wohnzimmer target is 20 heatingcontrol.0 2020-03-26 20:02:33.011 debug (27615) room Wohnzimmer setting new target 20 heatingcontrol.0 2020-03-26 20:02:33.010 debug (27615) ### new target temp20 heatingcontrol.0 2020-03-26 20:02:33.009 debug (27615) ### current > 1 0 2 heatingcontrol.0 2020-03-26 20:02:33.008 debug (27615) Wohnzimmer found period 0 with 20 on 16,30 heatingcontrol.0 2020-03-26 20:02:33.008 debug (27615) ### set ActiveTimeSlot to 6 period 0 heatingcontrol.0 2020-03-26 20:02:32.996 debug (27615) check ID Profiles.0.Wohnzimmer.Thu.Periods.1.time period 1 heatingcontrol.0 2020-03-26 20:02:32.995 debug (27615) check time for Wohnzimmer Profiles.0.Wohnzimmer.Thu.Periods.0.time 20 heatingcontrol.0 2020-03-26 20:02:32.995 warn (27615) try to convert 20 to a number heatingcontrol.0 2020-03-26 20:02:32.961 debug (27615) check ID Profiles.0.Wohnzimmer.Thu.Periods.0.time period 0 heatingcontrol.0 2020-03-26 20:02:32.960 debug (27615) ### set ActiveTimeSlot to 6 heatingcontrol.0 2020-03-26 20:02:32.960 debug (27615) FindNextPeriod for 2020-3-26 8:02:32 PM in Wohnzimmer heatingcontrol.0 2020-03-26 20:02:32.946 debug (27615) absolute GuestIncrease {"val":19,"ack":true,"ts":1585077212466,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1585077212462} heatingcontrol.0 2020-03-26 20:02:32.896 debug (27615) absolute AbsentDecrease {"val":10,"ack":true,"ts":1584564541099,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584564541075} heatingcontrol.0 2020-03-26 20:02:32.893 debug (27615) absolute PartyDecrease {"val":19,"ack":true,"ts":1584564535547,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584564535529} heatingcontrol.0 2020-03-26 20:02:32.889 debug (27615) absolute VacationAbsentDecrease {"val":10,"ack":true,"ts":1584616625404,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584616625398} heatingcontrol.0 2020-03-26 20:02:32.886 debug (27615) absolute WindowOpenDecrease {"val":1,"ack":true,"ts":1584564616330,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584564616320} heatingcontrol.0 2020-03-26 20:02:32.834 debug (27615) Wohnzimmer window open is false heatingcontrol.0 2020-03-26 20:02:32.833 debug (27615) check room Wohnzimmer heatingcontrol.0 2020-03-26 20:02:32.833 debug (27615) profile 0 heatingcontrol.0 2020-03-26 20:02:32.831 debug (27615) get profile heatingcontrol.0 2020-03-26 20:02:32.830 debug (27615) profile type 3 heatingcontrol.0 2020-03-26 20:02:32.731 debug (27615) calculating new target temperatures heatingcontrol.0 2020-03-26 20:02:32.727 info (27615) external states checked, done heatingcontrol.0 2020-03-26 20:02:32.721 debug (27615) checking Path2HolidayPresentDP heatingcontrol.0 2020-03-26 20:02:32.718 debug (27615) checking Path2PartyNowDP heatingcontrol.0 2020-03-26 20:02:32.716 debug (27615) checking Path2GuestsPresentDP heatingcontrol.0 2020-03-26 20:02:32.672 debug (27615) checking Path2VacationDP heatingcontrol.0 2020-03-26 20:02:32.670 debug (27615) checking Path2PresentDP heatingcontrol.0 2020-03-26 20:02:32.614 info (27615) setting PublicHolidyToday to false heatingcontrol.0 2020-03-26 20:02:32.586 debug (27615) checking Path2FeiertagAdapter heatingcontrol.0 2020-03-26 20:02:32.585 info (27615) checking all external states heatingcontrol.0 2020-03-26 20:02:32.578 debug (27615) [INFO] status = true next event: 29 Mar 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:32.195 debug (27615) [INFO] status = true next event: 29 Mar 2020 08:30:00 heatingcontrol.0 2020-03-26 20:02:31.873 debug (27615) [INFO] status = true next event: 28 Mar 2020 22:00:00 heatingcontrol.0 2020-03-26 20:02:31.871 debug (27615) [INFO] status = true next event: 28 Mar 2020 08:30:00 heatingcontrol.0 2020-03-26 20:02:31.869 debug (27615) [INFO] status = true next event: 27 Mar 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:31.865 debug (27615) [INFO] status = true next event: 27 Mar 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:31.863 debug (27615) [INFO] status = true next event: 26 Mar 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:31.860 debug (27615) [INFO] status = true next event: 2 Apr 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:31.857 debug (27615) [INFO] status = true next event: 1 Apr 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:31.854 debug (27615) [INFO] status = true next event: 1 Apr 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:31.851 debug (27615) [INFO] status = true next event: 31 Mar 2020 21:45:00 heatingcontrol.0 2020-03-26 20:02:31.846 debug (27615) [INFO] status = true next event: 31 Mar 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:31.843 debug (27615) [INFO] status = true next event: 30 Mar 2020 21:46:00 heatingcontrol.0 2020-03-26 20:02:31.838 debug (27615) [INFO] status = true next event: 30 Mar 2020 16:30:00 heatingcontrol.0 2020-03-26 20:02:31.476 debug (27615) create cron job #13 at 21:45 string: 0 45 21 * * 0 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.985 debug (27615) create cron job #12 at 8:30 string: 0 30 8 * * 0 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.980 debug (27615) create cron job #11 at 22:0 string: 0 0 22 * * 6 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.971 debug (27615) create cron job #10 at 8:30 string: 0 30 8 * * 6 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.960 debug (27615) create cron job #9 at 21:45 string: 0 45 21 * * 5 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.949 debug (27615) create cron job #8 at 16:30 string: 0 30 16 * * 5 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.941 debug (27615) create cron job #7 at 21:45 string: 0 45 21 * * 4 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.931 debug (27615) create cron job #6 at 16:30 string: 0 30 16 * * 4 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.914 debug (27615) create cron job #5 at 21:45 string: 0 45 21 * * 3 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.901 debug (27615) create cron job #4 at 16:30 string: 0 30 16 * * 3 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.890 debug (27615) create cron job #3 at 21:45 string: 0 45 21 * * 2 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.882 debug (27615) create cron job #2 at 16:30 string: 0 30 16 * * 2 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.868 debug (27615) create cron job #1 at 21:46 string: 0 46 21 * * 1 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.838 debug (27615) create cron job #0 at 16:30 string: 0 30 16 * * 1 Europe/Berlin heatingcontrol.0 2020-03-26 20:02:30.837 debug (27615) push to list = 21,45 heatingcontrol.0 2020-03-26 20:02:30.836 debug (27615) ---found time for Wohnzimmer at {"val":"21:45","ack":true,"ts":1585249096161,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1585169190360} 21:45 heatingcontrol.0 2020-03-26 20:02:30.784 debug (27615) push to list = 08,30 heatingcontrol.0 2020-03-26 20:02:30.783 debug (27615) ---found time for Wohnzimmer at {"val":"08:30","ack":true,"ts":1584817533980,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584817533944} 08:30 heatingcontrol.0 2020-03-26 20:02:30.777 debug (27615) setting Sun heatingcontrol.0 2020-03-26 20:02:30.777 debug (27615) push to list = 22,00 heatingcontrol.0 2020-03-26 20:02:30.776 debug (27615) ---found time for Wohnzimmer at {"val":"22:00","ack":true,"ts":1584613157211,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584613157203} 22:00 heatingcontrol.0 2020-03-26 20:02:30.732 debug (27615) push to list = 08,30 heatingcontrol.0 2020-03-26 20:02:30.731 debug (27615) ---found time for Wohnzimmer at {"val":"08:30","ack":true,"ts":1584613160410,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584613160402} 08:30 heatingcontrol.0 2020-03-26 20:02:30.717 debug (27615) setting Sat heatingcontrol.0 2020-03-26 20:02:30.717 debug (27615) push to list = 21,45 heatingcontrol.0 2020-03-26 20:02:30.716 debug (27615) ---found time for Wohnzimmer at {"val":"21:45","ack":true,"ts":1585249096161,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1585169180577} 21:45 heatingcontrol.0 2020-03-26 20:02:30.670 debug (27615) push to list = 16,30 heatingcontrol.0 2020-03-26 20:02:30.669 debug (27615) ---found time for Wohnzimmer at {"val":"16:30","ack":true,"ts":1584799077001,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584799076961} 16:30 heatingcontrol.0 2020-03-26 20:02:30.660 debug (27615) setting Fri heatingcontrol.0 2020-03-26 20:02:30.659 debug (27615) push to list = 21,45 heatingcontrol.0 2020-03-26 20:02:30.659 debug (27615) ---found time for Wohnzimmer at {"val":"21:45","ack":true,"ts":1585249096163,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1585169174322} 21:45 heatingcontrol.0 2020-03-26 20:02:30.655 debug (27615) push to list = 16,30 heatingcontrol.0 2020-03-26 20:02:30.655 debug (27615) ---found time for Wohnzimmer at {"val":"16:30","ack":true,"ts":1584799075665,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584790651773} 16:30 heatingcontrol.0 2020-03-26 20:02:30.645 debug (27615) setting Thu heatingcontrol.0 2020-03-26 20:02:30.645 debug (27615) push to list = 21,45 heatingcontrol.0 2020-03-26 20:02:30.644 debug (27615) ---found time for Wohnzimmer at {"val":"21:45","ack":true,"ts":1585249096160,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1585169162867} 21:45 heatingcontrol.0 2020-03-26 20:02:30.620 debug (27615) push to list = 16,30 heatingcontrol.0 2020-03-26 20:02:30.619 debug (27615) ---found time for Wohnzimmer at {"val":"16:30","ack":true,"ts":1584545891643,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584545891604} 16:30 heatingcontrol.0 2020-03-26 20:02:30.555 debug (27615) setting Wed heatingcontrol.0 2020-03-26 20:02:30.555 debug (27615) push to list = 21,45 heatingcontrol.0 2020-03-26 20:02:30.554 debug (27615) ---found time for Wohnzimmer at {"val":"21:45","ack":true,"ts":1585249096161,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1585169153928} 21:45 heatingcontrol.0 2020-03-26 20:02:30.529 debug (27615) push to list = 16,30 heatingcontrol.0 2020-03-26 20:02:30.528 debug (27615) ---found time for Wohnzimmer at {"val":"16:30","ack":true,"ts":1584545889776,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584545889758} 16:30 heatingcontrol.0 2020-03-26 20:02:30.464 debug (27615) setting Tue heatingcontrol.0 2020-03-26 20:02:30.463 debug (27615) push to list = 21,46 heatingcontrol.0 2020-03-26 20:02:30.462 debug (27615) ---found time for Wohnzimmer at {"val":"21:46","ack":true,"ts":1585249096162,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1585235599286} 21:46 heatingcontrol.0 2020-03-26 20:02:30.441 debug (27615) push to list = 16,30 heatingcontrol.0 2020-03-26 20:02:30.440 debug (27615) ---found time for Wohnzimmer at {"val":"16:30","ack":true,"ts":1584545855857,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1584545855843} 16:30 heatingcontrol.0 2020-03-26 20:02:30.402 debug (27615) setting Mon heatingcontrol.0 2020-03-26 20:02:30.401 debug (27615) profile 0 heatingcontrol.0 2020-03-26 20:02:30.361 debug (27615) get profile heatingcontrol.0 2020-03-26 20:02:30.360 debug (27615) start CalculateNextTime, profile type 3 heatingcontrol.0 2020-03-26 20:02:30.354 debug (27615) CreateDatepoints done heatingcontrol.0 2020-03-26 20:02:30.354 debug (27615) not active.... Gang heatingcontrol.0 2020-03-26 20:02:30.353 debug (27615) not active.... Eingang heatingcontrol.0 2020-03-26 20:02:30.353 debug (27615) not active.... Esszimmer heatingcontrol.0 2020-03-26 20:02:30.352 debug (27615) not active.... Speisekammer heatingcontrol.0 2020-03-26 20:02:30.352 debug (27615) not active.... Bad heatingcontrol.0 2020-03-26 20:02:30.352 debug (27615) not active.... Gästetoilette heatingcontrol.0 2020-03-26 20:02:30.351 debug (27615) not active.... Büro heatingcontrol.0 2020-03-26 20:02:30.351 debug (27615) not active.... Schlafzimmer heatingcontrol.0 2020-03-26 20:02:30.350 debug (27615) not active.... Küche heatingcontrol.0 2020-03-26 20:02:30.349 debug (27615) add state Profiles.0.Wohnzimmer.Sun.Periods.1 max 5 heatingcontrol.0 2020-03-26 20:02:30.346 debug (27615) add state Profiles.0.Wohnzimmer.Sat.Periods.1 max 5 heatingcontrol.0 2020-03-26 20:02:30.345 debug (27615) add state Profiles.0.Wohnzimmer.Fri.Periods.1 max 5 heatingcontrol.0 2020-03-26 20:02:30.344 debug (27615) add state Profiles.0.Wohnzimmer.Thu.Periods.1 max 5 heatingcontrol.0 2020-03-26 20:02:30.336 debug (27615) add state Profiles.0.Wohnzimmer.Wed.Periods.1 max 5 heatingcontrol.0 2020-03-26 20:02:30.335 debug (27615) add state Profiles.0.Wohnzimmer.Tue.Periods.1 max 5 heatingcontrol.0 2020-03-26 20:02:30.334 debug (27615) add state Profiles.0.Wohnzimmer.Mon.Periods.1 max 5 heatingcontrol.0 2020-03-26 20:02:30.333 debug (27615) add state Profiles.0.Wohnzimmer.Sun.Periods.0 max 5 heatingcontrol.0 2020-03-26 20:02:30.332 debug (27615) add state Profiles.0.Wohnzimmer.Sat.Periods.0 max 5 heatingcontrol.0 2020-03-26 20:02:30.331 debug (27615) add state Profiles.0.Wohnzimmer.Fri.Periods.0 max 5 heatingcontrol.0 2020-03-26 20:02:30.330 debug (27615) add state Profiles.0.Wohnzimmer.Thu.Periods.0 max 5 heatingcontrol.0 2020-03-26 20:02:30.329 debug (27615) add state Profiles.0.Wohnzimmer.Wed.Periods.0 max 5 heatingcontrol.0 2020-03-26 20:02:30.328 debug (27615) add state Profiles.0.Wohnzimmer.Tue.Periods.0 max 5 heatingcontrol.0 2020-03-26 20:02:30.327 debug (27615) add state Profiles.0.Wohnzimmer.Mon.Periods.0 max 5 heatingcontrol.0 2020-03-26 20:02:30.232 debug (27615) Profile Type every day, profiles 1 heatingcontrol.0 2020-03-26 20:02:30.232 debug (27615) room Wohnzimmer with 2 periods heatingcontrol.0 2020-03-26 20:02:30.148 debug (27615) create data profile points (absolute) for Wohnzimmer heatingcontrol.0 2020-03-26 20:02:30.097 debug (27615) rooms 10 heatingcontrol.0 2020-03-26 20:02:29.921 debug (27615) create data points for Wohnzimmer heatingcontrol.0 2020-03-26 20:02:29.152 debug (27615) start CreateDatepoints heatingcontrol.0 2020-03-26 20:02:29.146 debug (27615) devices [{"id":1,"name":"Wohnzimmer","OID_Current":"fritzdect.0.Comet_133560281368.temp","OID_Target":"fritzdect.0.Comet_133560281368.targettemp","isActive":true,"type":1,"room":"Wohnzimmer"}] heatingcontrol.0 2020-03-26 20:02:29.117 info (27615) starting. Version 0.3.19 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.19.0 heatingcontrol.0 2020-03-26 19:58:16.105 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:57:53.171 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:57:31.883 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:57:11.128 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:56:50.949 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:56:31.221 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:56:12.079 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:55:53.487 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:55:35.575 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:55:18.195 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:55:00.983 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:54:44.869 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:54:29.363 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:54:14.344 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:53:59.851 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:53:45.929 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:53:32.631 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:53:19.824 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:53:07.506 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:52:55.372 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:52:43.990 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:52:32.732 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:52:21.791 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:52:10.412 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:51:59.620 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:51:48.976 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:51:38.454 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:51:27.917 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:51:17.465 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:51:06.863 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error! heatingcontrol.0 2020-03-26 19:50:55.983 warn (5321) more then 100 cron jobs existing for this adapter, this might be a configuration error!Nach nem Neustart ist er wieder grün, aber immer mit folgendem fehler
heatingcontrol.0 2020-03-26 20:07:24.504 info (1786) subscribe feiertage.0.heute.boolean heatingcontrol.0 2020-03-26 20:07:23.793 warn (1786) try to convert 20 to a number heatingcontrol.0 2020-03-26 20:07:23.706 info (1786) external states checked, done heatingcontrol.0 2020-03-26 20:07:23.651 info (1786) setting PublicHolidyToday to false heatingcontrol.0 2020-03-26 20:07:23.647 info (1786) checking all external states heatingcontrol.0 2020-03-26 20:07:20.145 info (1786) starting. Version 0.3.19 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.19.0 host.ioBroker 2020-03-26 20:07:18.140 info instance system.adapter.heatingcontrol.0 started with pid 1786 heatingcontrol.0 2020-03-26 20:07:15.073 info (5321) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason heatingcontrol.0 2020-03-26 20:07:15.053 info (5321) change temperature override for room Wohnzimmer heatingcontrol.0 2020-03-26 20:07:15.043 info (5321) change temperature override for room Wohnzimmer heatingcontrol.0 2020-03-26 20:07:15.039 info (5321) change temperature override for room Wohnzimmer heatingcontrol.0 2020-03-26 20:07:15.035 info (5321) change temperature override for room Wohnzimmer heatingcontrol.0 2020-03-26 20:07:15.034 info (5321) change temperature override for room Wohnzimmer heatingcontrol.0 2020-03-26 20:07:15.033 info (5321) change temperature override for room Wohnzimmer heatingcontrol.0 2020-03-26 20:07:15.031 info (5321) change temperature override for room Wohnzimmer heatingcontrol.0 2020-03-26 20:07:15.029 info (5321) change temperature override for room Wohnzimmer heatingcontrol.0 2020-03-26 20:07:14.887 warn (5321) Got terminate signal. Checking desired PID: 1043 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.887 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.887 warn (5321) Got terminate signal. Checking desired PID: 488 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.887 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.887 warn (5321) Got terminate signal. Checking desired PID: 32188 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.886 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.886 warn (5321) Got terminate signal. Checking desired PID: 31492 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.886 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.885 warn (5321) Got terminate signal. Checking desired PID: 30707 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.885 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.885 warn (5321) Got terminate signal. Checking desired PID: 30004 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.885 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.885 warn (5321) Got terminate signal. Checking desired PID: 29267 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.884 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.884 info (5321) Got terminate signal TERMINATE_YOURSELF heatingcontrol.0 2020-03-26 20:07:14.884 warn (5321) Got terminate signal. Checking desired PID: 29236 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.884 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.883 info (5321) Got terminate signal TERMINATE_YOURSELF heatingcontrol.0 2020-03-26 20:07:14.883 warn (5321) Got terminate signal. Checking desired PID: 27615 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.883 warn (5321) Got terminate signal. Checking desired PID: 0 vs own PID 5321 heatingcontrol.0 2020-03-26 20:07:14.882 info (5321) Got terminate signal TERMINATE_YOURSELF heatingcontrol.0 2020-03-26 20:07:14.878 info (5321) cleaned everything up... heatingcontrol.0 2020-03-26 20:06:53.310 info (1043) subscribe feiertage.0.heute.boolean heatingcontrol.0 2020-03-26 20:06:52.488 warn (1043) try to convert 20 to a number heatingcontrol.0 2020-03-26 20:06:52.401 info (1043) external states checked, done heatingcontrol.0 2020-03-26 20:06:52.342 info (1043) setting PublicHolidyToday to false heatingcontrol.0 2020-03-26 20:06:52.336 info (1043) checking all external states heatingcontrol.0 2020-03-26 20:06:49.503 info (1043) starting. Version 0.3.19 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.19.0 host.ioBroker 2020-03-26 20:06:48.113 info Restart adapter system.adapter.heatingcontrol.0 because enabled host.ioBroker 2020-03-26 20:06:48.112 error instance system.adapter.heatingcontrol.0 terminated with code 156 (156) heatingcontrol.0 2020-03-26 20:06:47.593 warn (488) Got terminate signal. Checking desired PID: 1043 vs own PID 488 heatingcontrol.0 2020-03-26 20:06:47.576 info (488) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason heatingcontrol.0 2020-03-26 20:06:47.575 info (488) terminating heatingcontrol.0 2020-03-26 20:06:47.571 info (488) cleaned everything up... heatingcontrol.0 2020-03-26 20:06:47.570 warn (488) Got terminate signal. Checking desired PID: 0 vs own PID 488 host.ioBroker 2020-03-26 20:06:47.565 info instance system.adapter.heatingcontrol.0 started with pid 1043 heatingcontrol.0 2020-03-26 20:06:23.091 info (488) subscribe feiertage.0.heute.boolean heatingcontrol.0 2020-03-26 20:06:22.268 warn (488) try to convert 20 to a number heatingcontrol.0 2020-03-26 20:06:22.141 info (488) external states checked, done heatingcontrol.0 2020-03-26 20:06:22.088 info (488) setting PublicHolidyToday to false heatingcontrol.0 2020-03-26 20:06:22.084 info (488) checking all external states heatingcontrol.0 2020-03-26 20:06:18.836 info (488) starting. Version 0.3.19 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.19.0 host.ioBroker 2020-03-26 20:06:17.538 info Restart adapter system.adapter.heatingcontrol.0 because enabled host.ioBroker 2020-03-26 20:06:17.537 error instance system.adapter.heatingcontrol.0 terminated with code 156 (156) heatingcontrol.0 2020-03-26 20:06:16.998 warn (32188) Got terminate signal. Checking desired PID: 488 vs own PID 32188 heatingcontrol.0 2020-03-26 20:06:16.992 info (32188) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason heatingcontrol.0 2020-03-26 20:06:16.991 info (32188) terminating heatingcontrol.0 2020-03-26 20:06:16.987 info (32188) cleaned everything up... heatingcontrol.0 2020-03-26 20:06:16.985 warn (32188) Got terminate signal. Checking desired PID: 0 vs own PID 32188 host.ioBroker 2020-03-26 20:06:16.981 info instance system.adapter.heatingcontrol.0 started with pid 488 heatingcontrol.0 2020-03-26 20:05:52.261 info (32188) subscribe feiertage.0.heute.boolean heatingcontrol.0 2020-03-26 20:05:51.458 warn (32188) try to convert 20 to a number heatingcontrol.0 2020-03-26 20:05:51.322 info (32188) external states checked, done heatingcontrol.0 2020-03-26 20:05:51.309 info (32188) setting PublicHolidyToday to false heatingcontrol.0 2020-03-26 20:05:51.303 info (32188) checking all external states heatingcontrol.0 2020-03-26 20:05:48.478 info (32188) starting. Version 0.3.19 in /opt/iobroker/node_modules/iobroker.heatingcontrol, node: v10.19.0 host.ioBroker 2020-03-26 20:05:46.955 info Restart adapter system.adapter.heatingcontrol.0 because enabled host.ioBroker 2020-03-26 20:05:46.954 error instance system.adapter.heatingcontrol.0 terminated with code 156 (156) heatingcontrol.0 2020-03-26 20:05:46.425 warn (31492) Got terminate signal. Checking desired PID: 32188 vs own PID 31492 -
@Rene_HM
Achso, dass ganze wird nur bei eingeschalteter Heizperiode eingetragen, irgendetwas stimmt trotzdem noch nicht.
-
@Stephan-Schleich sagte in Test Adapter HeatingControl v0.3.x:
more then 100 cron jobs existing for this adapter, this might be a configuration error!
Das kannst du normalerweise ignorieren, in der nächsten Version erhöhe ich das Limit... Das führt aber nicht zu einem Fehler...
Auf der anderen Seite generierst du mit deinen Einstellungen genau 14 cron jobs. Wieso dann der check zuschlägt, sehe ich hier noch nicht.
Das obere log sieht gut aus, da ist alles okay und da werden die 14 cron jobs angelegt, da kommt aber auch die Warnung nicht
Im unteren log sieht sehr seltsam aus. Was ist der Unterschied zwischen oben und unten? -
@Rene_HM Das untere ist nach dem Neustart des adapters (Loglevel info), im debug kommt gerade kein fehler mehr
-
@Oli Datum und Uhrzeit auf dem System, wo der Adapter läuft, stimmen?
-
@Stephan-Schleich aber da startet der Adapter doch ständig neu und wird wieder beendet. Das sollte nicht sein...
-
-
@Rene_HM hab ihn jetzt mal nochmal aktiviert um die logs nochmal anzusehen, jetzt schaut's eigentlich wieder gut aus, keine Ahnung was da vorhin war, er hat vorhin auch echt ständig neugestartet, jetzt kommt nur noch die warnung, ansonsten läuft er
heatingcontrol.0 2020-03-26 20:40:56.629 info (15688) subscribe feiertage.0.heute.boolean heatingcontrol.0 2020-03-26 20:40:55.817 warn (15688) try to convert 20 to a number heatingcontrol.0 2020-03-26 20:40:55.691 info (15688) external states checked, done heatingcontrol.0 2020-03-26 20:40:55.636 info (15688) setting PublicHolidyToday to false
