Test Adapter OpenDTU

Thomas Braun

Du siehst den Reiter 'Von GitHub' in der Mitte?

crunchip

Wie kann ich den denn direkt aus Git installiren? Gebt es da eine Möglichkeit?

dann daneben auf von Github, wie schon erwähnt. Allerdings denke ich, da stimmt was anderes nicht, denn der Adapter liegt auf NPM also müsste es auch angezeigt werden

Thomas Braun

@crunchip sagte in Test Adapter OpenDTU:

Allerdings denke ich, da stimmt was anderes nicht, denn der Adapter liegt auf NPM also müsste es auch angezeigt werden

Stimmt. Gerade getestet.

Laser

@thomas-braun welches ist denn die aktuelle npm Version? Die 9.6.7?

crunchip

@laser https://www.npmjs.com/package/iobroker.opendtu

Thomas Braun

@laser sagte in Test Adapter OpenDTU:

welches ist denn die aktuelle npm Version? Die 9.6.7?

Hä?
npm kommt immer im Paket mit nodejs daher und wird nicht manuell angepackt. Wenn dein nodejs sauber installiert ist passt auch die Version von npm dazu.

Laser

@crunchip Das Problem, daß "opendtu" weder in NPM noch in github zu finden war, habe ich auch wieder. Beim letzten Mal lag es an der fehlerhaften NPM Version. Außer einem update und upgrade habe ich nichts gemacht. Warum auch, wenn das System läuft.

Thomas Braun

@laser sagte in Test Adapter OpenDTU:

Warum auch, wenn das System läuft.

Was läuft denn da?

iob diag

sagt dazu?

Laser

@thomas-braun


======== Start marking the full check here =========


Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.5
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 20:06:49 up 49 min,  1 user,  load average: 2.06, 1.84, 1.36
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=60.8'C
volt=0.9360V

*** Time and Time Zones ***
               Local time: Mon 2023-05-29 20:06:49 CEST
           Universal time: Mon 2023-05-29 18:06:49 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
otto
/home/otto
otto adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        1.5G        4.7G        1.0M        1.6G        6.2G
Swap:            99M          0B         99M
Total:          7.9G        1.5G        4.8G

         7811 M total memory
         1508 M used memory
         2309 M active memory
          607 M inactive memory
         4671 M free memory
           92 M buffer memory
         1538 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      110G   11G   96G  10% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     782M     0  782M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon May 29 19:17:02 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=D8:3A:DD:0D:3B:C5 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=af0e4bd2-02 rootfstype=ext4 fsck.repair=yes rootwait
[Mon May 29 19:17:04 2023] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[Mon May 29 19:17:04 2023] EXT4-fs (sda2): write access will be enabled during recovery
[Mon May 29 19:17:05 2023] EXT4-fs (sda2): orphan cleanup on readonly fs
[Mon May 29 19:17:05 2023] EXT4-fs (sda2): 13 orphan inodes deleted
[Mon May 29 19:17:05 2023] EXT4-fs (sda2): recovery complete
[Mon May 29 19:17:05 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Mon May 29 19:17:05 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Mon May 29 19:17:07 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
6.0G    /var/
3.6G    /var/log
3.4G    /var/log/journal/aaa8ad0836ed4822b2dfcde31d4a0fb2
3.4G    /var/log/journal
2.2G    /var/lib

Archived and active journals take up 3.3G in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.2G    /opt/iobroker/iobroker-data/
980M    /opt/iobroker/iobroker-data/history
158M    /opt/iobroker/iobroker-data/files
67M     /opt/iobroker/iobroker-data/backup-objects
51M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
11M     /opt/iobroker/iobroker-data/objects.jsonl
9.1M    /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts/static/js/2.3d2d025f.chunk.js.map
8.9M    /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/2.3d2d025f.chunk.js.map
6.9M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   2

Adapter State
+ system.adapter.admin.1                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.echarts.0                : echarts               : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : raspberrypi                              -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.i2c.0                    : i2c                   : raspberrypi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.logparser.0              : logparser             : raspberrypi                              -  enabled
+ system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.net-tools.0              : net-tools             : raspberrypi                              -  enabled
+ system.adapter.owfs.0                   : owfs                  : raspberrypi                              -  enabled, port: 4304
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.shelly.1                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              -  enabled
+ system.adapter.vedirect.0               : vedirect              : raspberrypi                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.zigbee.0                 : zigbee                : raspberrypi                              - disabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.owfs.0                   : owfs                  : raspberrypi                              -  enabled, port: 4304
+ system.adapter.shelly.1                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.0.12   , installed 1.0.12
Adapter    "flot"         : 1.11.0   , installed 1.11.0
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "i2c"          : 1.2.1    , installed 1.2.1
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "logparser"    : 2.1.1    , installed 2.1.2
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "owfs"         : 0.7.0    , installed 0.7.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-hqwidgets": 1.3.0    , installed 1.3.0
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        3542
States:         2903

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 http://deb.debian.org/debian bullseye-backports InRelease
Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:7 https://repos.influxdata.com/debian bullseye InRelease
Hit:8 https://apt.grafana.com stable InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          14432      561/sshd: /usr/sbin
tcp        0      0 192.168.2.54:2001       0.0.0.0:*               LISTEN      1001       79357      12606/io.hm-rpc.1
tcp        0      0 192.168.2.54:2010       0.0.0.0:*               LISTEN      1001       81026      12591/io.hm-rpc.0
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       79950      12436/iobroker.js-c
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       79199      12436/iobroker.js-c
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       78802      12636/io.mqtt.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          14434      561/sshd: /usr/sbin
tcp6       0      0 :::3000                 :::*                    LISTEN      110        3830       872/grafana
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       80534      13066/io.simple-api
tcp6       0      0 :::8086                 :::*                    LISTEN      999        14634      748/influxd
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       80911      12454/io.admin.1
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       80725      13673/io.web.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          14445      723/dhcpcd
udp        0      0 0.0.0.0:50020           0.0.0.0:*                           108        3556       424/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        3554       424/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       79510      12767/io.shelly.1
udp6       0      0 :::57690                :::*                                108        3557       424/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          12068      723/dhcpcd
udp6       0      0 :::5353                 :::*                                108        3555       424/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-05-29 20:07:44.196  - warn: javascript.0 (12524)     at Object.Solar (script.js.Solar.Ges-kW-Solarertrag:7:15)
2023-05-29 20:07:44.196  - warn: javascript.0 (12524)     at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2541:34)
2023-05-29 20:07:44.196  - warn: javascript.0 (12524)     at listOnTimeout (node:internal/timers:569:17)
2023-05-29 20:07:44.197  - warn: javascript.0 (12524)     at processTimers (node:internal/timers:512:7)
2023-05-29 20:07:44.253  - warn: javascript.0 (12524) getState "opendtu.0.total.yieldtotal" not found (3)
2023-05-29 20:07:44.254  - warn: javascript.0 (12524)     at Object.Solar (script.js.Solar.Ges-kWh-Solarertrag:7:15)
2023-05-29 20:07:44.255  - warn: javascript.0 (12524)     at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2541:34)
2023-05-29 20:07:44.255  - warn: javascript.0 (12524)     at listOnTimeout (node:internal/timers:569:17)
2023-05-29 20:07:44.255  - warn: javascript.0 (12524)     at processTimers (node:internal/timers:512:7)
2023-05-29 20:07:44.256  - info: javascript.0 (12524) script.js.Solar.Ges-kWh-Solarertrag: Hoyges: 0
2023-05-29 20:07:44.256  - info: javascript.0 (12524) script.js.Solar.Ges-kWh-Solarertrag: Laden: 75
2023-05-29 20:07:44.256  - info: javascript.0 (12524) script.js.Solar.Ges-kWh-Solarertrag: GesSolar: 75
2023-05-29 20:07:49.194  - warn: javascript.0 (12524) getState "opendtu.0.total.power" not found (3)
2023-05-29 20:07:49.196  - warn: javascript.0 (12524)     at Object.Solar (script.js.Solar.Ges-kW-Solarertrag:7:15)
2023-05-29 20:07:49.196  - warn: javascript.0 (12524)     at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2541:34)
2023-05-29 20:07:49.196  - warn: javascript.0 (12524)     at listOnTimeout (node:internal/timers:569:17)
2023-05-29 20:07:49.196  - warn: javascript.0 (12524)     at processTimers (node:internal/timers:512:7)
2023-05-29 20:07:49.255  - warn: javascript.0 (12524) getState "opendtu.0.total.yieldtotal" not found (3)
2023-05-29 20:07:49.257  - warn: javascript.0 (12524)     at Object.Solar (script.js.Solar.Ges-kWh-Solarertrag:7:15)
2023-05-29 20:07:49.257  - warn: javascript.0 (12524)     at Timeout._onTimeout (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:2541:34)
2023-05-29 20:07:49.257  - warn: javascript.0 (12524)     at listOnTimeout (node:internal/timers:569:17)
2023-05-29 20:07:49.257  - warn: javascript.0 (12524)     at processTimers (node:internal/timers:512:7)
2023-05-29 20:07:49.258  - info: javascript.0 (12524) script.js.Solar.Ges-kWh-Solarertrag: Hoyges: 0
2023-05-29 20:07:49.258  - info: javascript.0 (12524) script.js.Solar.Ges-kWh-Solarertrag: Laden: 75
2023-05-29 20:07:49.258  - info: javascript.0 (12524) script.js.Solar.Ges-kWh-Solarertrag: GesSolar: 75

============ Mark until here for C&P =============

iob diag has finished.

Habe nochmal die letzte NPV Version manuell installiert (aber erst, als opendtu nicht über die Admin- Oberfläche (Katzenfenster) zu finden war). War das ein Fehler?
https://forum.iobroker.net/topic/22867/how-to-node-js-für-iobroker-richtig-updaten

Thomas Braun

@laser sagte in Test Adapter OpenDTU:

War das ein Fehler?

Wie oft eigentlich noch? JAAAAAAAAAAAAA!

Thomas Braun

@laser sagte in Test Adapter OpenDTU:

(sda2): 13 orphan inodes deleted

Dein Dateisystem macht die Grätsche.

Laser

@thomas-braun OK. Da es vorher schon nicht ging, konnte ja nicht mehr viel passieren. HAbe ich mir gedacht. Jetzt muß ich sehen, wie ich die niedrige Version wieder reinbekomme.
Dateisystem? Habe einen neuen Raspi eingebaut. Mit alter SSD. Hat die SSD Alterungserscheinungen?

Thomas Braun

@laser

/usr/bin/npm            9.6.7

falsche Version, hier gehört 9.5.1 dazu.

Thomas Braun

@laser sagte in Test Adapter OpenDTU:

Hat die SSD Alterungserscheinungen?

Offenbar. Die vergisst inodes. Und/oder zu fährst die Kiste nicht sauber herunter sondern rupfst die brutal vom Strom.

Laser

@thomas-braun Ich mußte die Stromzufuhr radikal trennen, da vorhin nichts mehr ging (Auch kein Ping auf die Adresse des PI's.)

Thomas Braun

@laser

Dann war das Ding auch vorher schon mumpf.
Installier es neu auf einem neuen Speichermedium.

Laser

@thomas-braun Mache ich. Hole morgen eine neue SSD (die 3. in diesem Jahr).

Thomas Braun

@laser sagte in Test Adapter OpenDTU:

(die 3. in diesem Jahr).

Würde mir zu denken geben... Besser mit dem System umgehen und schon mal über eine USV nachgedacht?

Laser

@thomas-braun Nachgedacht schon...Stromausfall gibt es hier aber nicht.

Thomas Braun

@laser sagte in Test Adapter OpenDTU:

Stromausfall gibt es hier aber nicht.

Dann reiß halt die Kiste nicht immer vom Strom...

Community Forum

NEWS

Test Adapter OpenDTU

Support us

412

32.4k

81.5k

1.3m