- ioBroker Community Home
- Deutsch
- ioBroker Allgemein
- RING Adapter Verbindet sich nicht mehr
RING Adapter Verbindet sich nicht mehr
-
@thomas-braun ```
Skript v.2023-04-16*** BASE SYSTEM ***
Model : Raspberry Pi 4 Model B Rev 1.5
Architecture : aarch64
Docker : false
Virtualization : none
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseyePRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"Systemuptime and Load:
21:16:14 up 9 min, 1 user, load average: 2.66, 3.26, 1.94
CPU threads: 4Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.5'C
volt=0.9260V*** Time and Time Zones ***
Local time: Tue 2023-05-16 21:16:14 CEST
Universal time: Tue 2023-05-16 19:16:14 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: n/a
RTC in local TZ: no*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker*** X-Server-Setup ***
X-Server: false
Desktop:
Terminal: tty
Boot Target: multi-user.target*** MEMORY ***
total used free shared buff/cache available
Mem: 7.9G 711M 6.1G 0.0K 1.0G 7.0G
Swap: 99M 0B 99M
Total: 8.0G 711M 6.2G7862 M total memory 710 M used memory 737 M active memory 594 M inactive memory 6136 M free memory 172 M buffer memory 842 M swap cache 99 M total swap 0 M used swap 99 M free swapRaspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 59G 15G 42G 26% /
devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs tmpfs 1.6G 776K 1.6G 1% /run
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot
tmpfs tmpfs 787M 0 787M 0% /run/user/1000Messages concerning ext4 filesystem in dmesg:
[Tue May 16 21:06:56 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:FE:87:59 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=4c91ec57-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): 1 truncate cleaned up
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): recovery complete
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Tue May 16 21:06:57 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue May 16 21:07:00 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-roFiles in neuralgic directories:
/var:
2.4G /var/
2.1G /var/log
1.9G /var/log/journal/e2b5e5db604543deab373d50adc66fa2
1.9G /var/log/journal
96M /var/cacheArchived and active journals take up 1.8G in the file system.
/opt/iobroker/backups:
963M /opt/iobroker/backups//opt/iobroker/iobroker-data:
3.0G /opt/iobroker/iobroker-data/
2.3G /opt/iobroker/iobroker-data/files
1.6G /opt/iobroker/iobroker-data/files/ring.0
910M /opt/iobroker/iobroker-data/files/ring.0/doorbell_90474299
560M /opt/iobroker/iobroker-data/backup-objectsThe five largest files in iobroker-data are:
67M /opt/iobroker/iobroker-data/backups/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz
67M /opt/iobroker/iobroker-data/backup-objects/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz
41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map
24M /opt/iobroker/iobroker-data/objects.jsonl
23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.de9334af.js.map*** NodeJS-Installation ***
/usr/bin/nodejs v18.16.0
/usr/bin/node v18.16.0
/usr/bin/npm 9.5.1
/usr/bin/npx 9.5.1nodejs:
Installed: 18.16.0-deb-1nodesource1
Candidate: 18.16.0-deb-1nodesource1
Version table:
*** 18.16.0-deb-1nodesource1 500
500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
100 /var/lib/dpkg/status
12.22.12~dfsg-1~deb11u4 500
500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf PackagesTemp directories causing npm8 problem: 0
No problems detected*** ioBroker-Installation ***
ioBroker Status
iobroker is running on this host.Objects type: jsonl
States type: jsonlMULTIHOSTSERVICE/enabled: false
Core adapters versions
js-controller: 4.0.24
admin: 6.4.4
javascript: 7.0.3Adapters from github: 9
Adapter State
-
system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.xxxx, run as: admin
-
system.adapter.alexa2.0 : alexa2 : iobroker-pi - enabled
system.adapter.backitup.0 : backitup : iobroker-pi - enabled
system.adapter.blebox.0 : blebox : iobroker-pi - enabled
system.adapter.cloud.0 : cloud : iobroker-pi - enabled
system.adapter.coronavirus-statistics.0 : coronavirus-statistics: iobroker-pi - disabled
system.adapter.daswetter.0 : daswetter : iobroker-pi - enabled
system.adapter.daswetter.1 : daswetter : iobroker-pi - enabled
system.adapter.device-reminder.0 : device-reminder : iobroker-pi - enabled
system.adapter.device-watcher.0 : device-watcher : iobroker-pi - disabled
system.adapter.discovery.0 : discovery : iobroker-pi - disabled
system.adapter.dwd.0 : dwd : iobroker-pi - enabled
system.adapter.echarts.0 : echarts : iobroker-pi - enabled
system.adapter.feiertage.0 : feiertage : iobroker-pi - enabled
system.adapter.fritzbox.0 : fritzbox : iobroker-pi - enabled
system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker-pi - enabled -
system.adapter.ham.0 : ham : iobroker-pi - enabled
-
system.adapter.history.0 : history : iobroker-pi - enabled
-
system.adapter.hm-rega.0 : hm-rega : iobroker-pi - enabled
-
system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001
-
system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701
-
system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010
system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443
system.adapter.ical.0 : ical : iobroker-pi - enabled
system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker-pi - enabled
system.adapter.icons-icons8.0 : icons-icons8 : iobroker-pi - enabled
system.adapter.icons-material-png.0 : icons-material-png : iobroker-pi - enabled
system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker-pi - enabled
system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker-pi - enabled
system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker-pi - enabled
system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker-pi - enabled
system.adapter.info.0 : info : iobroker-pi - enabled
system.adapter.iot.0 : iot : iobroker-pi - enabled
system.adapter.iot.1 : iot : iobroker-pi - enabled
system.adapter.iot.2 : iot : iobroker-pi - enabled -
system.adapter.javascript.0 : javascript : iobroker-pi - enabled
-
system.adapter.javascript.1 : javascript : iobroker-pi - enabled
-
system.adapter.javascript.2 : javascript : iobroker-pi - enabled
-
system.adapter.javascript.3 : javascript : iobroker-pi - enabled
system.adapter.material.0 : material : iobroker-pi - enabled -
system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883
-
system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.0.0
system.adapter.parcel.0 : parcel : iobroker-pi - enabled -
system.adapter.ping.0 : ping : iobroker-pi - enabled
system.adapter.pollenflug.0 : pollenflug : iobroker-pi - enabled
system.adapter.psa.0 : psa : iobroker-pi - enabled
system.adapter.reolink.0 : reolink : iobroker-pi - enabled
system.adapter.ring.0 : ring : iobroker-pi - enabled
system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.0.0, run as: admin
system.adapter.smartgarden.0 : smartgarden : iobroker-pi - enabled
system.adapter.sourceanalytix.0 : sourceanalytix : iobroker-pi - enabled -
system.adapter.tahoma.0 : tahoma : iobroker-pi - enabled
system.adapter.tankerkoenig.0 : tankerkoenig : iobroker-pi - enabled -
system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.0.0
system.adapter.time-switch.0 : time-switch : iobroker-pi - enabled -
system.adapter.tr-064.0 : tr-064 : iobroker-pi - enabled
-
system.adapter.tuya.1 : tuya : iobroker-pi - enabled
system.adapter.vaillant.0 : vaillant : iobroker-pi - enabled
system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker-pi - enabled
system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker-pi - enabled
system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker-pi - enabled
system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker-pi - enabled
system.adapter.vis-icontwo.0 : vis-icontwo : iobroker-pi - enabled
system.adapter.vis-inventwo.0 : vis-inventwo : iobroker-pi - enabled
system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker-pi - enabled
system.adapter.vis-justgage.0 : vis-justgage : iobroker-pi - enabled
system.adapter.vis-keyboard.0 : vis-keyboard : iobroker-pi - enabled
system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker-pi - enabled
system.adapter.vis-material.0 : vis-material : iobroker-pi - enabled
system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker-pi - enabled
system.adapter.vis-metro.0 : vis-metro : iobroker-pi - enabled
system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker-pi - enabled
system.adapter.vis-weather.0 : vis-weather : iobroker-pi - enabled
system.adapter.vis.0 : vis : iobroker-pi - enabled -
system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin
system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker-pi - disabled
system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin -
system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638
-
system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638
system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xx:6638 -
instance is alive
Enabled adapters with bindings
- system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.xxx, run as: admin
- system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001
- system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701
- system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010
- system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443
- system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883
- system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.0.0
system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.0.0, run as: admin - system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.0.0
- system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin
system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin - system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638
- system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638
- system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxxx:6638
ioBroker-Repositories
stable : http://download.iobroker.net/sources-dist.json
beta : http://download.iobroker.net/sources-dist-latest.jsonActive repo(s): beta
Installed ioBroker-Instances
Used repository: beta
Adapter "admin" : 6.4.4 , installed 6.4.4
Adapter "alexa2" : 3.23.2 , installed 3.23.2
Adapter "backitup" : 2.6.20 , installed 2.6.20
Adapter "blebox" : 2.0.1 , installed 2.0.1
Adapter "cloud" : 4.4.1 , installed 4.4.1
Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7
Adapter "daswetter" : 3.1.8 , installed 3.1.8
Adapter "device-reminder": 1.2.9 , installed 1.2.9
Adapter "device-watcher": 2.9.1 , installed 2.9.1
Adapter "discovery" : 3.1.0 , installed 3.1.0
Adapter "dwd" : 2.8.3 , installed 2.8.3
Adapter "echarts" : 1.4.15 , installed 1.4.15
Adapter "elero-usb-transmitter": 0.5.2, installed 0.5.2
Adapter "feiertage" : 1.1.0 , installed 1.1.0
Adapter "fritzbox" : 0.5.0 , installed 0.5.0
Adapter "ham" : 5.3.1 , installed 5.3.1
Adapter "history" : 2.2.4 , installed 2.2.4
Adapter "hm-rega" : 3.0.46 , installed 3.0.46
Adapter "hm-rpc" : 1.15.18 , installed 1.15.18
Adapter "hue" : 3.7.1 , installed 3.7.1
Adapter "ical" : 1.13.2 , installed 1.13.2
Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter "icons-icons8" : 0.0.1 , installed 0.0.1
Adapter "icons-material-png": 0.1.0, installed 0.1.0
Adapter "icons-material-svg": 0.1.0, installed 0.1.0
Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0
Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0
Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter "info" : 1.9.26 , installed 1.9.26
Adapter "iot" : 1.14.5 , installed 1.14.5
Adapter "javascript" : 7.0.3 , installed 7.0.3
Controller "js-controller": 4.0.24 , installed 4.0.24
Adapter "material" : 1.3.1 , installed 1.3.1
Adapter "mqtt" : 4.1.1 , installed 4.1.1
Adapter "mqtt-client" : 1.6.3 , installed 1.6.3
Adapter "net-tools" : 0.2.0 , installed 0.2.0
Adapter "ocpp" : 0.12.5 , installed 0.12.5
Adapter "onvif" : 1.0.5 , installed 1.0.5
Adapter "openweathermap": 0.3.8 , installed 0.3.8
Adapter "parcel" : 0.0.28 , installed 0.0.28
Adapter "ping" : 1.5.3 , installed 1.5.3
Adapter "pollenflug" : 1.0.6 , installed 1.0.6
Adapter "psa" : 0.0.11 , installed 0.0.11
Adapter "ring" : 3.3.0 , installed 3.3.0
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "smartgarden" : 2.0.0 , installed 2.0.0
Adapter "socketio" : 6.3.5 , installed 6.3.5
Adapter "sourceanalytix": 0.4.14 , installed 0.4.14
Adapter "tahoma" : 0.10.2 , installed 0.10.2
Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7
Adapter "telegram" : 1.15.6 , installed 1.15.6
Adapter "time-switch" : 2.2.2 , installed 2.2.2
Adapter "tr-064" : 4.2.18 , installed 4.2.18
Adapter "tuya" : 3.14.2 , installed 3.14.2
Adapter "vaillant" : 0.1.2 , installed 0.1.2
Adapter "vis" : 1.4.16 , installed 1.4.16
Adapter "vis-2-widgets-energy": 0.1.12, installed 0.1.12
Adapter "vis-2-widgets-gauges": 0.1.12, installed 0.1.12
Adapter "vis-2-widgets-jaeger-design": 0.3.2, installed 0.3.2
Adapter "vis-2-widgets-material": 0.2.13, installed 0.2.13
Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0
Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0
Adapter "vis-icontwo" : 0.94.0 , installed 0.94.0
Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12
Adapter "vis-justgage" : 1.0.2 , installed 1.0.2
Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2
Adapter "vis-material" : 0.1.3 , installed 0.1.3
Adapter "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter "vis-materialdesign": 0.5.9, installed 0.5.94
Adapter "vis-metro" : 1.2.0 , installed 1.2.0
Adapter "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter "vis-weather" : 2.5.6 , installed 2.5.6
Adapter "web" : 5.5.3 , installed 5.5.3
Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3
Adapter "ws" : 2.3.6 , installed 2.3.6
Adapter "zigbee" : 1.8.10 , installed 1.8.10Objects and States
Please stand by - This may take a while
Objects: 31979
States: 27289*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://dl.yarnpkg.com/debian stable InRelease: The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
W: Failed to fetch https://dl.yarnpkg.com/debian/dists/stable/InRelease The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease
Get:4 https://dl.yarnpkg.com/debian stable InRelease [17.1 kB]
Err:4 https://dl.yarnpkg.com/debian stable InRelease
The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
Fetched 17.1 kB in 2s (11.4 kB/s)
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://dl.yarnpkg.com/debian stable InRelease: The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
W: Failed to fetch https://dl.yarnpkg.com/debian/dists/stable/InRelease The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 192.168.178.xxxx:18701 0.0.0.0:* LISTEN 1001 31354 3453/io.hm-rpc.1
tcp 0 0 192.168.178.xxx:8111 0.0.0.0:* LISTEN 1001 31915 3149/io.admin.0
tcp 0 0 192.168.178.xxx:8089 0.0.0.0:* LISTEN 1001 36290 4156/io.ws.0
tcp 0 0 127.0.0.xxxx:9000 0.0.0.0:* LISTEN 1001 30893 3131/iobroker.js-co
tcp 0 0 127.0.0.xxxx:9001 0.0.0.0:* LISTEN 1001 28956 3131/iobroker.js-co
tcp 0 0 192.168.178.xxxx:12010 0.0.0.0:* LISTEN 1001 32420 3460/io.hm-rpc.2
tcp 0 0 192.168.178.xxxxx:12001 0.0.0.0:* LISTEN 1001 32418 3446/io.hm-rpc.0
tcp 0 0 192.168.178.xxxx:9082 0.0.0.0:* LISTEN 1001 34940 3725/io.web.0
tcp 0 0 0.0.0.0:xxx 0.0.0.0:* LISTEN 0 12069 495/sshd: /usr/sbin
tcp 0 0 0.0.0.0:xxx 0.0.0.0:* LISTEN 1001 31736 3610/io.mqtt.0
tcp6 0 0 :::8087 :::* LISTEN 1001 36281 4212/io.simple-api.
tcp6 0 0 :::22 :::* LISTEN 0 12071 495/sshd: /usr/sbin
udp 0 0 0.0.0.0:6xx6 0.0.0.0:* 1001 35941 3520/io.tuya.1
udp 0 0 0.0.0.0:6xx7 0.0.0.0:* 1001 35942 3520/io.tuya.1
udp 0 0 0.0.0.0:xx 0.0.0.0:* 0 12085 690/dhcpcd
udp 0 0 192.168.178.xxx:123 0.0.0.0:* 109 14860 487/ntpd
udp 0 0 127.0.0.1:xxx 0.0.0.0:* 0 14669 487/ntpd
udp 0 0 0.0.0.0:xxx 0.0.0.0:* 0 14665 487/ntpd
udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 14567 355/avahi-daemon: r
udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 14565 355/avahi-daemon: r
udp6 0 0 2a02:908:xxx:e560:b:123 :::* 109 14863 487/ntpd
udp6 0 0 fe80::53bb:xxxx:907:123 :::* 109 14846 487/ntpd
udp6 0 0 ::1:123 :::* 0 14671 487/ntpd
udp6 0 0 :::123 :::* 0 14662 487/ntpd
udp6 0 0 :::546 :::* 0 12096 690/dhcpcd
udp6 0 0 :::5353 :::* 108 14566 355/avahi-daemon: r
udp6 0 0 :::50842 :::* 108 14568 355/avahi-daemon: r*** Log File - Last 25 Lines ***
2023-05-16 21:21:18.357 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Manufacturer {"val":"Balboa","ack":true,"ts":1684264705875,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587285530}
2023-05-16 21:21:18.448 - info: ham.0 (3617) updateState Temperatur-Einstellung.Accessory-Information.Model: value = Spa /common= {"type":"string","read":true,"write":false,"role":"text","name":"Model","unit":""}
2023-05-16 21:21:18.453 - debug: reolink.0 (4158) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 21:21:18.698 - debug: reolink.0 (4158) Motion Detection value: 0
2023-05-16 21:21:18.853 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Model {"val":"Spa","ack":true,"ts":1684264706232,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587285817}
2023-05-16 21:21:18.912 - info: ham.0 (3617) updateState Temperatur-Einstellung.Accessory-Information.Name: value = Temperatur Einstellung /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""}
2023-05-16 21:21:19.326 - debug: reolink.0 (4158) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 21:21:19.376 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Name {"val":"Temperatur Einstellung","ack":true,"ts":1684264707007,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587286038}
2023-05-16 21:21:19.404 - info: ham.0 (3617) updateState Temperatur-Einstellung.Accessory-Information.Serial-Number: value = 2.2.6 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Serial Number","unit":""}
2023-05-16 21:21:19.493 - info: tuya.1 (3520) 03200296dc4f2229d2f2: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.108:6668
2023-05-16 21:21:19.555 - debug: reolink.0 (4158) Motion Detection value: 0
2023-05-16 21:21:19.806 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Serial-Number {"val":"2.2.6","ack":true,"ts":1684264707422,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587286267}
2023-05-16 21:21:20.170 - info: ham.0 (3617) updateState Temperatur-Einstellung.Accessory-Information.Firmware-Revision: value = 2.2.6 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Firmware Revision","unit":""}
2023-05-16 21:21:20.204 - info: blebox.0 (3855) State value to set for "blebox.0.Teich.tempSensor.sensors.0.id" has to be type "string" but received type "number"
2023-05-16 21:21:20.342 - debug: reolink.0 (4158) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 21:21:20.670 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Firmware-Revision {"val":"2.2.6","ack":true,"ts":1684264707866,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587286484}
2023-05-16 21:21:20.709 - debug: reolink.0 (4158) Motion Detection value: 0
2023-05-16 21:21:20.744 - info: ham.0 (3617) updateChannel Temperatur-Einstellung.Thermostat: name =
2023-05-16 21:21:20.917 - info: ham.0 (3617) updateState Temperatur-Einstellung.Thermostat.Current-Heating-Cooling-State: value = 1 /common= {"type":"number","min":0,"max":2,"read":true,"write":false,"role":"value","name":"Current Heating Cooling State","unit":""}
2023-05-16 21:21:21.015 - info: tuya.1 (3520) bfed8326787ed29axxxtot: Connect locally to device
2023-05-16 21:21:21.018 - info: tuya.1 (3520) bfed8326787ed29axxxtot Init with IP=192.168.178.xxx, Key=51d7af4a1464d114, Version=3.4
2023-05-16 21:21:21.146 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Thermostat.Current-Heating-Cooling-State {"val":1,"ack":true,"ts":1684264881108,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1684261586145}
2023-05-16 21:21:21.205 - info: ham.0 (3617) updateState Temperatur-Einstellung.Thermostat.Target-Heating-Cooling-State: value = 1 /common= {"type":"number","min":0,"max":2,"read":true,"write":true,"role":"level","name":"Target Heating Cooling State","unit":""}
2023-05-16 21:21:21.405 - debug: reolink.0 (4158) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 21:21:21.533 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Thermostat.Target-Heating-Cooling-State {"val":1,"ack":true,"ts":1684264881478,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1681646058199}============ Mark until here for C&P ============= iob diag has finished.Du solltest die Kiste sauber neustarten, nicht austreten!
Die yarn .list-Datei ist noch vorhanden.
-
-
Du solltest die Kiste sauber neustarten, nicht austreten!
Die yarn .list-Datei ist noch vorhanden.
Hallo Zusammen,
selbes Problem hier.
ring.0 2023-05-16 21:27:55.940 warn Terminated (UNCAUGHT_EXCEPTION): Without reason ring.0 2023-05-16 21:27:55.938 info terminating ring.0 2023-05-16 21:27:55.934 error Cannot read properties of undefined (reading 'battery_percentage') ring.0 2023-05-16 21:27:55.933 error TypeError: Cannot read properties of undefined (reading 'battery_percentage') at OwnRingDevice.updateHealthObject (/opt/iobroker/node_modules/iobroker.ring/build/lib/ownRingDevice.js:420:52) at process.processTicksAndRejections (node:internal/process/task_queues:95:5) ring.0 2023-05-16 21:27:55.933 error unhandled promise rejection: Cannot read properties of undefined (reading 'battery_percentage') ring.0 2023-05-16 21:27:55.932 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). ring.0 2023-05-16 21:27:54.544 info Recieved new Refresh Token. Will use the new one until the token in config gets changedMein ioBroker läuft in einem Docker Container. Habe den "Fixer" schon durchlaufen lassen und den Container neu gestartet.
Keine Verbesserung.
-
Hallo Zusammen,
selbes Problem hier.
ring.0 2023-05-16 21:27:55.940 warn Terminated (UNCAUGHT_EXCEPTION): Without reason ring.0 2023-05-16 21:27:55.938 info terminating ring.0 2023-05-16 21:27:55.934 error Cannot read properties of undefined (reading 'battery_percentage') ring.0 2023-05-16 21:27:55.933 error TypeError: Cannot read properties of undefined (reading 'battery_percentage') at OwnRingDevice.updateHealthObject (/opt/iobroker/node_modules/iobroker.ring/build/lib/ownRingDevice.js:420:52) at process.processTicksAndRejections (node:internal/process/task_queues:95:5) ring.0 2023-05-16 21:27:55.933 error unhandled promise rejection: Cannot read properties of undefined (reading 'battery_percentage') ring.0 2023-05-16 21:27:55.932 error Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). ring.0 2023-05-16 21:27:54.544 info Recieved new Refresh Token. Will use the new one until the token in config gets changedMein ioBroker läuft in einem Docker Container. Habe den "Fixer" schon durchlaufen lassen und den Container neu gestartet.
Keine Verbesserung.
-
Du solltest die Kiste sauber neustarten, nicht austreten!
Die yarn .list-Datei ist noch vorhanden.
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Du solltest die Kiste sauber neustarten, nicht austreten!
Die yarn .list-Datei ist noch vorhanden.
Jetzt is die sources.list gelöscht -
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
https://github.com/iobroker-community-adapters/ioBroker.ring/issues/525
Wir sind nicht allein ;-)
-
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Du solltest die Kiste sauber neustarten, nicht austreten!
Die yarn .list-Datei ist noch vorhanden.
Jetzt is die sources.list gelöschtIch hoffe NICHT die
/etc/apt/sources.listgelöscht...ls -lAh /etc/aptSauberer Neustart wird überigens mit
sudo rebootgemacht, nicht durch Stecker ziehen im laufenden Betrieb.
-
Ich hoffe NICHT die
/etc/apt/sources.listgelöscht...ls -lAh /etc/aptSauberer Neustart wird überigens mit
sudo rebootgemacht, nicht durch Stecker ziehen im laufenden Betrieb.
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Ich hoffe NICHT die
/etc/apt/sources.listgelöscht...ls -lAh /etc/aptSauberer Neustart wird überigens mit
sudo rebootgemacht, nicht durch Stecker ziehen im laufenden Betrieb.
Doch die ist weg
Und nun?
die sources.list.d ist noch da -
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Ich hoffe NICHT die
/etc/apt/sources.listgelöscht...ls -lAh /etc/aptSauberer Neustart wird überigens mit
sudo rebootgemacht, nicht durch Stecker ziehen im laufenden Betrieb.
Doch die ist weg
Und nun?
die sources.list.d ist noch daWarum hab ich das eigentlich mehrfach geschrieben?
-
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Ich hoffe NICHT die
/etc/apt/sources.listgelöscht...ls -lAh /etc/aptSauberer Neustart wird überigens mit
sudo rebootgemacht, nicht durch Stecker ziehen im laufenden Betrieb.
Doch die ist weg
Und nun?
die sources.list.d ist noch da@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
-
Warum hab ich das eigentlich mehrfach geschrieben?
@thomas-braun habe das .d als schreibfehler angesehen
-
@thomas-braun habe das .d als schreibfehler angesehen
-
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/ total 12K -rw-r--r-- 1 root root 208 Oct 26 2022 nodesource.list -rw-r--r-- 1 root root 191 Feb 3 2022 raspi.list -rw-r--r-- 1 root root 90 Oct 26 2022 yarn.list root@iobroker-pi:/etc/apt#Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?
-
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/ total 12K -rw-r--r-- 1 root root 208 Oct 26 2022 nodesource.list -rw-r--r-- 1 root root 191 Feb 3 2022 raspi.list -rw-r--r-- 1 root root 90 Oct 26 2022 yarn.list root@iobroker-pi:/etc/apt#Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?
@michihorn yarn.list solltest du löschen, nicht die sources.list
Vielleicht kann dir jemand seine sources.list von seinem pi4/32bit zur Verfügung stellen. Meine kannst du nicht haben, die passt hinten und vorne nicht zu deinem System.
-
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/ total 12K -rw-r--r-- 1 root root 208 Oct 26 2022 nodesource.list -rw-r--r-- 1 root root 191 Feb 3 2022 raspi.list -rw-r--r-- 1 root root 90 Oct 26 2022 yarn.list root@iobroker-pi:/etc/apt#Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
root@iobroker
Wie oft muss man Dir das eigentlich noch so erklären ?
Gleiches mit "Text in Codetags packen" ;)
Lehrling seit 1975 !!!
Beitrag geholfen ? dann gerne ein upvote rechts unten im Beitrag klicken ;)
https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge -
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/ total 12K -rw-r--r-- 1 root root 208 Oct 26 2022 nodesource.list -rw-r--r-- 1 root root 191 Feb 3 2022 raspi.list -rw-r--r-- 1 root root 90 Oct 26 2022 yarn.list root@iobroker-pi:/etc/apt#Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?
Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.
Ich bin dann auch raus hier.
-
Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.
Ich bin dann auch raus hier.
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.
Ich bin dann auch raus hier.
YARN.list ist jetzt raus und sources.list wieder da
-
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.
Ich bin dann auch raus hier.
YARN.list ist jetzt raus und sources.list wieder da
-
iob diag
======== Start marking the full check here =========Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 23:04:25 up 21 min, 1 user, load average: 1.65, 1.45, 1.65 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=45.2'C volt=0.9360V *** Time and Time Zones *** Local time: Tue 2023-05-16 23:04:25 CEST Universal time: Tue 2023-05-16 21:04:25 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp io i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 2.7G 4.7G 0.0K 527M 5.1G Swap: 99M 0B 99M Total: 8.0G 2.7G 4.8G 7862 M total memory 2675 M used memory 2670 M active memory 365 M inactive memory 4658 M free memory 65 M buffer memory 462 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 15G 42G 26% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 788K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 787M 0 787M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue May 16 22:42:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:FE:87:59 vc_mem. mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty 1 root=PARTUUID=4c91ec57-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue May 16 22:42:41 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue May 16 22:42:41 2023] VFS: Mounted root (ext4 filesystem) readonly on devic e 179:2. [Tue May 16 22:42:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,ioc harset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 2.3G /var/ 2.0G /var/log 1.8G /var/log/journal/e2b5e5db604543deab373d50adc66fa2 1.8G /var/log/journal 96M /var/cache Archived and active journals take up 1.7G in the file system. /opt/iobroker/backups: 963M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.0G /opt/iobroker/iobroker-data/ 2.3G /opt/iobroker/iobroker-data/files 1.6G /opt/iobroker/iobroker-data/files/ring.0 910M /opt/iobroker/iobroker-data/files/ring.0/doorbell_90474299 560M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 67M /opt/iobroker/iobroker-data/backups/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz 67M /opt/iobroker/iobroker-data/backup-objects/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 34M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.de9334af.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.4.4 javascript: 7.0.3 Adapters from github: 9 Adapter State + system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.144, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker-pi - enabled + system.adapter.backitup.0 : backitup : iobroker-pi - enabled + system.adapter.blebox.0 : blebox : iobroker-pi - enabled + system.adapter.cloud.0 : cloud : iobroker-pi - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: iobroker-pi - disabled system.adapter.daswetter.0 : daswetter : iobroker-pi - enabled system.adapter.daswetter.1 : daswetter : iobroker-pi - enabled + system.adapter.device-reminder.0 : device-reminder : iobroker-pi - enabled system.adapter.device-watcher.0 : device-watcher : iobroker-pi - disabled system.adapter.discovery.0 : discovery : iobroker-pi - disabled system.adapter.dwd.0 : dwd : iobroker-pi - enabled + system.adapter.echarts.0 : echarts : iobroker-pi - enabled system.adapter.feiertage.0 : feiertage : iobroker-pi - enabled + system.adapter.fritzbox.0 : fritzbox : iobroker-pi - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker-pi - enabled + system.adapter.ham.0 : ham : iobroker-pi - enabled + system.adapter.history.0 : history : iobroker-pi - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker-pi - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701 + system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010 + system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443 system.adapter.ical.0 : ical : iobroker-pi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker-pi - enabled system.adapter.icons-icons8.0 : icons-icons8 : iobroker-pi - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker-pi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker-pi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker-pi - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker-pi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker-pi - enabled + system.adapter.info.0 : info : iobroker-pi - enabled + system.adapter.iot.0 : iot : iobroker-pi - enabled + system.adapter.iot.1 : iot : iobroker-pi - enabled + system.adapter.iot.2 : iot : iobroker-pi - enabled + system.adapter.javascript.0 : javascript : iobroker-pi - enabled + system.adapter.javascript.1 : javascript : iobroker-pi - enabled + system.adapter.javascript.2 : javascript : iobroker-pi - enabled + system.adapter.javascript.3 : javascript : iobroker-pi - enabled system.adapter.material.0 : material : iobroker-pi - enabled + system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.parcel.0 : parcel : iobroker-pi - enabled + system.adapter.ping.0 : ping : iobroker-pi - enabled + system.adapter.pollenflug.0 : pollenflug : iobroker-pi - enabled + system.adapter.psa.0 : psa : iobroker-pi - enabled + system.adapter.reolink.0 : reolink : iobroker-pi - enabled system.adapter.ring.0 : ring : iobroker-pi - enabled + system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker-pi - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker-pi - enabled + system.adapter.tahoma.0 : tahoma : iobroker-pi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker-pi - enabled + system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.time-switch.0 : time-switch : iobroker-pi - enabled + system.adapter.tr-064.0 : tr-064 : iobroker-pi - enabled + system.adapter.tuya.1 : tuya : iobroker-pi - enabled + system.adapter.vaillant.0 : vaillant : iobroker-pi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker-pi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker-pi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker-pi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker-pi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker-pi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker-pi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker-pi - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker-pi - enabled system.adapter.vis-keyboard.0 : vis-keyboard : iobroker-pi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker-pi - enabled system.adapter.vis-material.0 : vis-material : iobroker-pi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker-pi - enabled system.adapter.vis-metro.0 : vis-metro : iobroker-pi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker-pi - enabled system.adapter.vis-weather.0 : vis-weather : iobroker-pi - enabled system.adapter.vis.0 : vis : iobroker-pi - enabled + system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker-pi - disabled + system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.xxx, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701 + system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010 + system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443 + system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.xxx.0 + system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.xxx.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.xxx.0 + system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin + system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.4.4 , installed 6.4.4 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.20 , installed 2.6.20 Adapter "blebox" : 2.0.1 , installed 2.0.1 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7 Adapter "daswetter" : 3.1.8 , installed 3.1.8 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "device-watcher": 2.9.1 , installed 2.9.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "echarts" : 1.4.15 , installed 1.4.15 Adapter "elero-usb-transmitter": 0.5.2, installed 0.5.2 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ocpp" : 0.12.5 , installed 0.12.5 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "openweathermap": 0.3.8 , installed 0.3.8 Adapter "parcel" : 0.0.28 , installed 0.0.28 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "ring" : 3.3.0 , installed 3.3.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.3.5 , installed 6.3.5 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "tahoma" : 0.10.2 , installed 0.10.2 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "time-switch" : 2.2.2 , installed 2.2.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vaillant" : 0.1.2 , installed 0.1.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-2-widgets-energy": 0.1.12, installed 0.1.12 Adapter "vis-2-widgets-gauges": 0.1.12, installed 0.1.12 Adapter "vis-2-widgets-jaeger-design": 0.3.2, installed 0.3.2 Adapter "vis-2-widgets-material": 0.2.13, installed 0.2.13 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.94.0 , installed 0.94.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 5.5.3 , installed 5.5.3 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.3.6 , installed 2.3.6 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 31972 States: 27169 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.xxx:1883 0.0.0.0:* LISTEN 1001 16572 1038/io.mqtt.0 tcp 0 0 192.168.178.xxx:12001 0.0.0.0:* LISTEN 1001 18520 868/io.hm-rpc.0 tcp 0 0 192.168.178.xxx:12010 0.0.0.0:* LISTEN 1001 18527 896/io.hm-rpc.2 tcp 0 0 192.168.178.xxx:8089 0.0.0.0:* LISTEN 1001 17263 1558/io.ws.0 tcp 0 0 192.168.178.xxx:8111 0.0.0.0:* LISTEN 1001 13072 698/io.admin.0 tcp 0 0 127.0.0.xxx:9001 0.0.0.0:* LISTEN 1001 11933 489/iobroker.js-con tcp 0 0 127.0.0.xxx:9000 0.0.0.0:* LISTEN 1001 12965 489/iobroker.js-con tcp 0 0 192.168.178.xxx:18701 0.0.0.0:* LISTEN 1001 15735 875/io.hm-rpc.1 tcp 0 0 0.0.0.xxx:22 0.0.0.0:* LISTEN 0 12862 525/sshd: /usr/sbin tcp 0 0 192.168.178.xxx:9082 0.0.0.0:* LISTEN 1001 16241 1147/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 12864 525/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 19827 1618/io.simple-api. udp 0 0 0.0.0.xxx:xxx 0.0.0.0:* 0 11099 696/dhcpcd udp 0 0 192.168.178.xxx:123 0.0.0.0:* 109 13011 512/ntpd udp 0 0 127.0.0.xxx:xxx 0.0.0.0:* 0 12837 512/ntpd udp 0 0 0.0.0.0:xxx 0.0.0.0:* 0 12833 512/ntpd udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 12702 354/avahi-daemon: r udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 12700 354/avahi-daemon: r udp 0 0 0.0.0.0:xxx 0.0.0.0:* 1001 19128 991/io.tuya.1 udp 0 0 0.0.0.0:xxx 0.0.0.0:* 1001 19129 991/io.tuya.1 udp6 0 0 2a02:908:xxx:e560:b:123 :::* 109 13051 512/ntpd udp6 0 0 fe80::53bb:xxx:907:123 :::* 109 12919 512/ntpd udp6 0 0 ::1:xxx :::* 0 12839 512/ntpd udp6 0 0 :::xxx :::* 0 12830 512/ntpd udp6 0 0 :::xxx :::* 0 11115 696/dhcpcd udp6 0 0 :::xxx :::* 108 12701 354/avahi-daemon: r udp6 0 0 :::5xx6 :::* 108 12703 354/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-05-16 23:05:47.772 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:47.852 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:48.710 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:48.766 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:49.772 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:49.784 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:50.048 - info: blebox.0 (1278) State value to set for "blebox.0.Teich.tempSensor.sensors.0.id" has to be type "string" but received type "number" 2023-05-16 23:05:50.699 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:50.731 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:51.793 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:51.867 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:52.812 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:52.826 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:53.760 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:53.774 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:54.849 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:54.859 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:55.748 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:55.758 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:56.755 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:56.773 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:57.728 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:57.738 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:58.828 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:58.931 - debug: reolink.0 (1584) Motion Detection value: 0============ Mark until here for C&P =============
iob diag has finished.
-
======== Start marking the full check here =========Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 23:04:25 up 21 min, 1 user, load average: 1.65, 1.45, 1.65 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=45.2'C volt=0.9360V *** Time and Time Zones *** Local time: Tue 2023-05-16 23:04:25 CEST Universal time: Tue 2023-05-16 21:04:25 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp io i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 2.7G 4.7G 0.0K 527M 5.1G Swap: 99M 0B 99M Total: 8.0G 2.7G 4.8G 7862 M total memory 2675 M used memory 2670 M active memory 365 M inactive memory 4658 M free memory 65 M buffer memory 462 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 15G 42G 26% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 788K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 787M 0 787M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue May 16 22:42:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:FE:87:59 vc_mem. mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty 1 root=PARTUUID=4c91ec57-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue May 16 22:42:41 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue May 16 22:42:41 2023] VFS: Mounted root (ext4 filesystem) readonly on devic e 179:2. [Tue May 16 22:42:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,ioc harset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 2.3G /var/ 2.0G /var/log 1.8G /var/log/journal/e2b5e5db604543deab373d50adc66fa2 1.8G /var/log/journal 96M /var/cache Archived and active journals take up 1.7G in the file system. /opt/iobroker/backups: 963M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.0G /opt/iobroker/iobroker-data/ 2.3G /opt/iobroker/iobroker-data/files 1.6G /opt/iobroker/iobroker-data/files/ring.0 910M /opt/iobroker/iobroker-data/files/ring.0/doorbell_90474299 560M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 67M /opt/iobroker/iobroker-data/backups/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz 67M /opt/iobroker/iobroker-data/backup-objects/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 34M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.de9334af.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.4.4 javascript: 7.0.3 Adapters from github: 9 Adapter State + system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.144, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker-pi - enabled + system.adapter.backitup.0 : backitup : iobroker-pi - enabled + system.adapter.blebox.0 : blebox : iobroker-pi - enabled + system.adapter.cloud.0 : cloud : iobroker-pi - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: iobroker-pi - disabled system.adapter.daswetter.0 : daswetter : iobroker-pi - enabled system.adapter.daswetter.1 : daswetter : iobroker-pi - enabled + system.adapter.device-reminder.0 : device-reminder : iobroker-pi - enabled system.adapter.device-watcher.0 : device-watcher : iobroker-pi - disabled system.adapter.discovery.0 : discovery : iobroker-pi - disabled system.adapter.dwd.0 : dwd : iobroker-pi - enabled + system.adapter.echarts.0 : echarts : iobroker-pi - enabled system.adapter.feiertage.0 : feiertage : iobroker-pi - enabled + system.adapter.fritzbox.0 : fritzbox : iobroker-pi - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker-pi - enabled + system.adapter.ham.0 : ham : iobroker-pi - enabled + system.adapter.history.0 : history : iobroker-pi - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker-pi - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701 + system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010 + system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443 system.adapter.ical.0 : ical : iobroker-pi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker-pi - enabled system.adapter.icons-icons8.0 : icons-icons8 : iobroker-pi - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker-pi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker-pi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker-pi - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker-pi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker-pi - enabled + system.adapter.info.0 : info : iobroker-pi - enabled + system.adapter.iot.0 : iot : iobroker-pi - enabled + system.adapter.iot.1 : iot : iobroker-pi - enabled + system.adapter.iot.2 : iot : iobroker-pi - enabled + system.adapter.javascript.0 : javascript : iobroker-pi - enabled + system.adapter.javascript.1 : javascript : iobroker-pi - enabled + system.adapter.javascript.2 : javascript : iobroker-pi - enabled + system.adapter.javascript.3 : javascript : iobroker-pi - enabled system.adapter.material.0 : material : iobroker-pi - enabled + system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.parcel.0 : parcel : iobroker-pi - enabled + system.adapter.ping.0 : ping : iobroker-pi - enabled + system.adapter.pollenflug.0 : pollenflug : iobroker-pi - enabled + system.adapter.psa.0 : psa : iobroker-pi - enabled + system.adapter.reolink.0 : reolink : iobroker-pi - enabled system.adapter.ring.0 : ring : iobroker-pi - enabled + system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker-pi - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker-pi - enabled + system.adapter.tahoma.0 : tahoma : iobroker-pi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker-pi - enabled + system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.time-switch.0 : time-switch : iobroker-pi - enabled + system.adapter.tr-064.0 : tr-064 : iobroker-pi - enabled + system.adapter.tuya.1 : tuya : iobroker-pi - enabled + system.adapter.vaillant.0 : vaillant : iobroker-pi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker-pi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker-pi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker-pi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker-pi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker-pi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker-pi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker-pi - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker-pi - enabled system.adapter.vis-keyboard.0 : vis-keyboard : iobroker-pi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker-pi - enabled system.adapter.vis-material.0 : vis-material : iobroker-pi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker-pi - enabled system.adapter.vis-metro.0 : vis-metro : iobroker-pi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker-pi - enabled system.adapter.vis-weather.0 : vis-weather : iobroker-pi - enabled system.adapter.vis.0 : vis : iobroker-pi - enabled + system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker-pi - disabled + system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.xxx, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701 + system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010 + system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443 + system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.xxx.0 + system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.xxx.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.xxx.0 + system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin + system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.4.4 , installed 6.4.4 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.20 , installed 2.6.20 Adapter "blebox" : 2.0.1 , installed 2.0.1 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7 Adapter "daswetter" : 3.1.8 , installed 3.1.8 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "device-watcher": 2.9.1 , installed 2.9.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "echarts" : 1.4.15 , installed 1.4.15 Adapter "elero-usb-transmitter": 0.5.2, installed 0.5.2 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ocpp" : 0.12.5 , installed 0.12.5 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "openweathermap": 0.3.8 , installed 0.3.8 Adapter "parcel" : 0.0.28 , installed 0.0.28 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "ring" : 3.3.0 , installed 3.3.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.3.5 , installed 6.3.5 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "tahoma" : 0.10.2 , installed 0.10.2 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "time-switch" : 2.2.2 , installed 2.2.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vaillant" : 0.1.2 , installed 0.1.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-2-widgets-energy": 0.1.12, installed 0.1.12 Adapter "vis-2-widgets-gauges": 0.1.12, installed 0.1.12 Adapter "vis-2-widgets-jaeger-design": 0.3.2, installed 0.3.2 Adapter "vis-2-widgets-material": 0.2.13, installed 0.2.13 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.94.0 , installed 0.94.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 5.5.3 , installed 5.5.3 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.3.6 , installed 2.3.6 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 31972 States: 27169 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.xxx:1883 0.0.0.0:* LISTEN 1001 16572 1038/io.mqtt.0 tcp 0 0 192.168.178.xxx:12001 0.0.0.0:* LISTEN 1001 18520 868/io.hm-rpc.0 tcp 0 0 192.168.178.xxx:12010 0.0.0.0:* LISTEN 1001 18527 896/io.hm-rpc.2 tcp 0 0 192.168.178.xxx:8089 0.0.0.0:* LISTEN 1001 17263 1558/io.ws.0 tcp 0 0 192.168.178.xxx:8111 0.0.0.0:* LISTEN 1001 13072 698/io.admin.0 tcp 0 0 127.0.0.xxx:9001 0.0.0.0:* LISTEN 1001 11933 489/iobroker.js-con tcp 0 0 127.0.0.xxx:9000 0.0.0.0:* LISTEN 1001 12965 489/iobroker.js-con tcp 0 0 192.168.178.xxx:18701 0.0.0.0:* LISTEN 1001 15735 875/io.hm-rpc.1 tcp 0 0 0.0.0.xxx:22 0.0.0.0:* LISTEN 0 12862 525/sshd: /usr/sbin tcp 0 0 192.168.178.xxx:9082 0.0.0.0:* LISTEN 1001 16241 1147/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 12864 525/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 19827 1618/io.simple-api. udp 0 0 0.0.0.xxx:xxx 0.0.0.0:* 0 11099 696/dhcpcd udp 0 0 192.168.178.xxx:123 0.0.0.0:* 109 13011 512/ntpd udp 0 0 127.0.0.xxx:xxx 0.0.0.0:* 0 12837 512/ntpd udp 0 0 0.0.0.0:xxx 0.0.0.0:* 0 12833 512/ntpd udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 12702 354/avahi-daemon: r udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 12700 354/avahi-daemon: r udp 0 0 0.0.0.0:xxx 0.0.0.0:* 1001 19128 991/io.tuya.1 udp 0 0 0.0.0.0:xxx 0.0.0.0:* 1001 19129 991/io.tuya.1 udp6 0 0 2a02:908:xxx:e560:b:123 :::* 109 13051 512/ntpd udp6 0 0 fe80::53bb:xxx:907:123 :::* 109 12919 512/ntpd udp6 0 0 ::1:xxx :::* 0 12839 512/ntpd udp6 0 0 :::xxx :::* 0 12830 512/ntpd udp6 0 0 :::xxx :::* 0 11115 696/dhcpcd udp6 0 0 :::xxx :::* 108 12701 354/avahi-daemon: r udp6 0 0 :::5xx6 :::* 108 12703 354/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-05-16 23:05:47.772 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:47.852 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:48.710 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:48.766 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:49.772 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:49.784 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:50.048 - info: blebox.0 (1278) State value to set for "blebox.0.Teich.tempSensor.sensors.0.id" has to be type "string" but received type "number" 2023-05-16 23:05:50.699 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:50.731 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:51.793 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:51.867 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:52.812 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:52.826 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:53.760 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:53.774 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:54.849 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:54.859 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:55.748 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:55.758 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:56.755 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:56.773 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:57.728 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:57.738 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:58.828 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:58.931 - debug: reolink.0 (1584) Motion Detection value: 0============ Mark until here for C&P =============
iob diag has finished.
Künftig regelmäßig Updates fahren und den root in Ruhe lassen.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden459
Online32.8k
Benutzer82.9k
Themen1.3m
Beiträge