RING Adapter Verbindet sich nicht mehr

michihorn

@thomas-braun ```

Skript v.2023-04-16

*** BASE SYSTEM ***
Model : Raspberry Pi 4 Model B Rev 1.5
Architecture : aarch64
Docker : false
Virtualization : none
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
21:16:14 up 9 min, 1 user, load average: 2.66, 3.26, 1.94
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=53.5'C
volt=0.9260V

*** Time and Time Zones ***
Local time: Tue 2023-05-16 21:16:14 CEST
Universal time: Tue 2023-05-16 19:16:14 UTC
RTC time: n/a
Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
NTP service: n/a
RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server: false
Desktop:
Terminal: tty
Boot Target: multi-user.target

*** MEMORY ***
total used free shared buff/cache available
Mem: 7.9G 711M 6.1G 0.0K 1.0G 7.0G
Swap: 99M 0B 99M
Total: 8.0G 711M 6.2G

     7862 M total memory
      710 M used memory
      737 M active memory
      594 M inactive memory
     6136 M free memory
      172 M buffer memory
      842 M swap cache
       99 M total swap
        0 M used swap
       99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem Type Size Used Avail Use% Mounted on
/dev/root ext4 59G 15G 42G 26% /
devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev
tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs tmpfs 1.6G 776K 1.6G 1% /run
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
/dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot
tmpfs tmpfs 787M 0 787M 0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue May 16 21:06:56 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:FE:87:59 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty1 root=PARTUUID=4c91ec57-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): 1 truncate cleaned up
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): recovery complete
[Tue May 16 21:06:57 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Tue May 16 21:06:57 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue May 16 21:07:00 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET SOURCE FSTYPE OPTIONS
/ /dev/mmcblk0p2 ext4 rw,noatime
`-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
2.4G /var/
2.1G /var/log
1.9G /var/log/journal/e2b5e5db604543deab373d50adc66fa2
1.9G /var/log/journal
96M /var/cache

Archived and active journals take up 1.8G in the file system.

/opt/iobroker/backups:
963M /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
3.0G /opt/iobroker/iobroker-data/
2.3G /opt/iobroker/iobroker-data/files
1.6G /opt/iobroker/iobroker-data/files/ring.0
910M /opt/iobroker/iobroker-data/files/ring.0/doorbell_90474299
560M /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
67M /opt/iobroker/iobroker-data/backups/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz
67M /opt/iobroker/iobroker-data/backup-objects/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz
41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map
24M /opt/iobroker/iobroker-data/objects.jsonl
23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.de9334af.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs v18.16.0
/usr/bin/node v18.16.0
/usr/bin/npm 9.5.1
/usr/bin/npx 9.5.1

nodejs:
Installed: 18.16.0-deb-1nodesource1
Candidate: 18.16.0-deb-1nodesource1
Version table:
*** 18.16.0-deb-1nodesource1 500
500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
100 /var/lib/dpkg/status
12.22.12~dfsg-1~deb11u4 500
500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

Objects type: jsonl
States type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller: 4.0.24
admin: 6.4.4
javascript: 7.0.3

Adapters from github: 9

Adapter State

system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.xxxx, run as: admin
system.adapter.alexa2.0 : alexa2 : iobroker-pi - enabled
system.adapter.backitup.0 : backitup : iobroker-pi - enabled
system.adapter.blebox.0 : blebox : iobroker-pi - enabled
system.adapter.cloud.0 : cloud : iobroker-pi - enabled
system.adapter.coronavirus-statistics.0 : coronavirus-statistics: iobroker-pi - disabled
system.adapter.daswetter.0 : daswetter : iobroker-pi - enabled
system.adapter.daswetter.1 : daswetter : iobroker-pi - enabled
system.adapter.device-reminder.0 : device-reminder : iobroker-pi - enabled
system.adapter.device-watcher.0 : device-watcher : iobroker-pi - disabled
system.adapter.discovery.0 : discovery : iobroker-pi - disabled
system.adapter.dwd.0 : dwd : iobroker-pi - enabled
system.adapter.echarts.0 : echarts : iobroker-pi - enabled
system.adapter.feiertage.0 : feiertage : iobroker-pi - enabled
system.adapter.fritzbox.0 : fritzbox : iobroker-pi - enabled
system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker-pi - enabled
system.adapter.ham.0 : ham : iobroker-pi - enabled
system.adapter.history.0 : history : iobroker-pi - enabled
system.adapter.hm-rega.0 : hm-rega : iobroker-pi - enabled
system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001
system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701
system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010
system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443
system.adapter.ical.0 : ical : iobroker-pi - enabled
system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker-pi - enabled
system.adapter.icons-icons8.0 : icons-icons8 : iobroker-pi - enabled
system.adapter.icons-material-png.0 : icons-material-png : iobroker-pi - enabled
system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker-pi - enabled
system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker-pi - enabled
system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker-pi - enabled
system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker-pi - enabled
system.adapter.info.0 : info : iobroker-pi - enabled
system.adapter.iot.0 : iot : iobroker-pi - enabled
system.adapter.iot.1 : iot : iobroker-pi - enabled
system.adapter.iot.2 : iot : iobroker-pi - enabled
system.adapter.javascript.0 : javascript : iobroker-pi - enabled
system.adapter.javascript.1 : javascript : iobroker-pi - enabled
system.adapter.javascript.2 : javascript : iobroker-pi - enabled
system.adapter.javascript.3 : javascript : iobroker-pi - enabled
system.adapter.material.0 : material : iobroker-pi - enabled
system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883
system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.0.0
system.adapter.parcel.0 : parcel : iobroker-pi - enabled
system.adapter.ping.0 : ping : iobroker-pi - enabled
system.adapter.pollenflug.0 : pollenflug : iobroker-pi - enabled
system.adapter.psa.0 : psa : iobroker-pi - enabled
system.adapter.reolink.0 : reolink : iobroker-pi - enabled
system.adapter.ring.0 : ring : iobroker-pi - enabled
system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.0.0, run as: admin
system.adapter.smartgarden.0 : smartgarden : iobroker-pi - enabled
system.adapter.sourceanalytix.0 : sourceanalytix : iobroker-pi - enabled
system.adapter.tahoma.0 : tahoma : iobroker-pi - enabled
system.adapter.tankerkoenig.0 : tankerkoenig : iobroker-pi - enabled
system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.0.0
system.adapter.time-switch.0 : time-switch : iobroker-pi - enabled
system.adapter.tr-064.0 : tr-064 : iobroker-pi - enabled
system.adapter.tuya.1 : tuya : iobroker-pi - enabled
system.adapter.vaillant.0 : vaillant : iobroker-pi - enabled
system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker-pi - enabled
system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker-pi - enabled
system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker-pi - enabled
system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker-pi - enabled
system.adapter.vis-icontwo.0 : vis-icontwo : iobroker-pi - enabled
system.adapter.vis-inventwo.0 : vis-inventwo : iobroker-pi - enabled
system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker-pi - enabled
system.adapter.vis-justgage.0 : vis-justgage : iobroker-pi - enabled
system.adapter.vis-keyboard.0 : vis-keyboard : iobroker-pi - enabled
system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker-pi - enabled
system.adapter.vis-material.0 : vis-material : iobroker-pi - enabled
system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker-pi - enabled
system.adapter.vis-metro.0 : vis-metro : iobroker-pi - enabled
system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker-pi - enabled
system.adapter.vis-weather.0 : vis-weather : iobroker-pi - enabled
system.adapter.vis.0 : vis : iobroker-pi - enabled
system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin
system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker-pi - disabled
system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin
system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638
system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638
system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xx:6638
instance is alive

Enabled adapters with bindings

system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.xxx, run as: admin
system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001
system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701
system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010
system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443
system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883
system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.0.0
system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.0.0, run as: admin
system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.0.0
system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin
system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin
system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638
system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638
system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxxx:6638

ioBroker-Repositories
stable : http://download.iobroker.net/sources-dist.json
beta : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter "admin" : 6.4.4 , installed 6.4.4
Adapter "alexa2" : 3.23.2 , installed 3.23.2
Adapter "backitup" : 2.6.20 , installed 2.6.20
Adapter "blebox" : 2.0.1 , installed 2.0.1
Adapter "cloud" : 4.4.1 , installed 4.4.1
Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7
Adapter "daswetter" : 3.1.8 , installed 3.1.8
Adapter "device-reminder": 1.2.9 , installed 1.2.9
Adapter "device-watcher": 2.9.1 , installed 2.9.1
Adapter "discovery" : 3.1.0 , installed 3.1.0
Adapter "dwd" : 2.8.3 , installed 2.8.3
Adapter "echarts" : 1.4.15 , installed 1.4.15
Adapter "elero-usb-transmitter": 0.5.2, installed 0.5.2
Adapter "feiertage" : 1.1.0 , installed 1.1.0
Adapter "fritzbox" : 0.5.0 , installed 0.5.0
Adapter "ham" : 5.3.1 , installed 5.3.1
Adapter "history" : 2.2.4 , installed 2.2.4
Adapter "hm-rega" : 3.0.46 , installed 3.0.46
Adapter "hm-rpc" : 1.15.18 , installed 1.15.18
Adapter "hue" : 3.7.1 , installed 3.7.1
Adapter "ical" : 1.13.2 , installed 1.13.2
Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter "icons-icons8" : 0.0.1 , installed 0.0.1
Adapter "icons-material-png": 0.1.0, installed 0.1.0
Adapter "icons-material-svg": 0.1.0, installed 0.1.0
Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0
Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0
Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter "info" : 1.9.26 , installed 1.9.26
Adapter "iot" : 1.14.5 , installed 1.14.5
Adapter "javascript" : 7.0.3 , installed 7.0.3
Controller "js-controller": 4.0.24 , installed 4.0.24
Adapter "material" : 1.3.1 , installed 1.3.1
Adapter "mqtt" : 4.1.1 , installed 4.1.1
Adapter "mqtt-client" : 1.6.3 , installed 1.6.3
Adapter "net-tools" : 0.2.0 , installed 0.2.0
Adapter "ocpp" : 0.12.5 , installed 0.12.5
Adapter "onvif" : 1.0.5 , installed 1.0.5
Adapter "openweathermap": 0.3.8 , installed 0.3.8
Adapter "parcel" : 0.0.28 , installed 0.0.28
Adapter "ping" : 1.5.3 , installed 1.5.3
Adapter "pollenflug" : 1.0.6 , installed 1.0.6
Adapter "psa" : 0.0.11 , installed 0.0.11
Adapter "ring" : 3.3.0 , installed 3.3.0
Adapter "simple-api" : 2.7.2 , installed 2.7.2
Adapter "smartgarden" : 2.0.0 , installed 2.0.0
Adapter "socketio" : 6.3.5 , installed 6.3.5
Adapter "sourceanalytix": 0.4.14 , installed 0.4.14
Adapter "tahoma" : 0.10.2 , installed 0.10.2
Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7
Adapter "telegram" : 1.15.6 , installed 1.15.6
Adapter "time-switch" : 2.2.2 , installed 2.2.2
Adapter "tr-064" : 4.2.18 , installed 4.2.18
Adapter "tuya" : 3.14.2 , installed 3.14.2
Adapter "vaillant" : 0.1.2 , installed 0.1.2
Adapter "vis" : 1.4.16 , installed 1.4.16
Adapter "vis-2-widgets-energy": 0.1.12, installed 0.1.12
Adapter "vis-2-widgets-gauges": 0.1.12, installed 0.1.12
Adapter "vis-2-widgets-jaeger-design": 0.3.2, installed 0.3.2
Adapter "vis-2-widgets-material": 0.2.13, installed 0.2.13
Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0
Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0
Adapter "vis-icontwo" : 0.94.0 , installed 0.94.0
Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12
Adapter "vis-justgage" : 1.0.2 , installed 1.0.2
Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2
Adapter "vis-material" : 0.1.3 , installed 0.1.3
Adapter "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter "vis-materialdesign": 0.5.9, installed 0.5.94
Adapter "vis-metro" : 1.2.0 , installed 1.2.0
Adapter "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter "vis-weather" : 2.5.6 , installed 2.5.6
Adapter "web" : 5.5.3 , installed 5.5.3
Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3
Adapter "ws" : 2.3.6 , installed 2.3.6
Adapter "zigbee" : 1.8.10 , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects: 31979
States: 27289

*** OS-Repositories and Updates ***
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://dl.yarnpkg.com/debian stable InRelease: The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
W: Failed to fetch https://dl.yarnpkg.com/debian/dists/stable/InRelease The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
W: Some index files failed to download. They have been ignored, or old ones used instead.
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease
Get:4 https://dl.yarnpkg.com/debian stable InRelease [17.1 kB]
Err:4 https://dl.yarnpkg.com/debian stable InRelease
The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
Fetched 17.1 kB in 2s (11.4 kB/s)
Reading package lists...
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://dl.yarnpkg.com/debian stable InRelease: The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
W: Failed to fetch https://dl.yarnpkg.com/debian/dists/stable/InRelease The following signatures were invalid: EXPKEYSIG 23E7166788B63E1E Yarn Packaging yarn@dan.cx
W: Some index files failed to download. They have been ignored, or old ones used instead.
Pending Updates: 0

*** Listening Ports ***
Active Internet connections Proto Recv-Q Send-Q Local Address tcp 0 0 192.168.178.xxxx:18701 tcp 0 0 Foreign Address State User Inode PID/Program name
0.0.0.0:* LISTEN 1001 31354 3453/io.hm-rpc.1
href="http://192.168.178.xxx:8111" rel="nofollow ugc">192.168.178.xxx:8111 0.0.0.0:* LISTEN 1001 31915 3149/io.admin.0
href="http://192.168.178.xxx:8089" rel="nofollow ugc">192.168.178.xxx:8089 0.0.0.0:* LISTEN 1001 36290 4156/io.ws.0
0.0.0.0:* LISTEN 1001 30893 3131/iobroker.js-co
0.0.0.0:* LISTEN 1001 28956 3131/iobroker.js-co
0.0.0.0:* LISTEN 1001 32420 3460/io.hm-rpc.2
0.0.0.0:* LISTEN 1001 32418 3446/io.hm-rpc.0
0.0.0.0:* LISTEN 1001 34940 3725/io.web.0
0.0.0.0:* LISTEN 0 12069 495/sshd: /usr/sbin
0.0.0.0:* LISTEN 1001 31736 3610/io.mqtt.0
:::* LISTEN 1001 36281 4212/io.simple-api.
:::* LISTEN 0 12071 495/sshd: /usr/sbin
0.0.0.0:* 1001 35941 3520/io.tuya.1
0.0.0.0:* 1001 35942 3520/io.tuya.1
0.0.0.0:* 0 12085 690/dhcpcd
href="http://192.168.178.xxx:123" rel="nofollow ugc">192.168.178.xxx:123 0.0.0.0:* 109 14860 487/ntpd
0.0.0.0:* 0 14669 487/ntpd
0.0.0.0:* 0 14665 487/ntpd
0.0.0.0:* 108 14567 355/avahi-daemon: r
0.0.0.0:* 108 14565 355/avahi-daemon: r
:::* 109 14863 487/ntpd
:::* 109 14846 487/ntpd
:::* 0 14671 487/ntpd
:::* 0 14662 487/ntpd
:::* 0 12096 690/dhcpcd
:::* 108 14566 355/avahi-daemon: r
:::* 108 14568 355/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-05-16 21:21:18.357 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Manufacturer {"val":"Balboa","ack":true,"ts":1684264705875,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587285530}
2023-05-16 21:21:18.448 - info: ham.0 (3617) updateState Temperatur-Einstellung.Accessory-Information.Model: value = Spa /common= {"type":"string","read":true,"write":false,"role":"text","name":"Model","unit":""}
2023-05-16 21:21:18.453 - debug: reolink.0 (4158) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 21:21:18.698 - debug: reolink.0 (4158) Motion Detection value: 0
2023-05-16 21:21:18.853 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Model {"val":"Spa","ack":true,"ts":1684264706232,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587285817}
2023-05-16 21:21:18.912 - info: ham.0 (3617) updateState Temperatur-Einstellung.Accessory-Information.Name: value = Temperatur Einstellung /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""}
2023-05-16 21:21:19.326 - debug: reolink.0 (4158) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 21:21:19.376 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Name {"val":"Temperatur Einstellung","ack":true,"ts":1684264707007,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587286038}
2023-05-16 21:21:19.404 - info: ham.0 (3617) updateState Temperatur-Einstellung.Accessory-Information.Serial-Number: value = 2.2.6 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Serial Number","unit":""}
2023-05-16 21:21:19.493 - info: tuya.1 (3520) 03200296dc4f2229d2f2: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.108:6668
2023-05-16 21:21:19.555 - debug: reolink.0 (4158) Motion Detection value: 0
2023-05-16 21:21:19.806 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Serial-Number {"val":"2.2.6","ack":true,"ts":1684264707422,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587286267}
2023-05-16 21:21:20.170 - info: ham.0 (3617) updateState Temperatur-Einstellung.Accessory-Information.Firmware-Revision: value = 2.2.6 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Firmware Revision","unit":""}
2023-05-16 21:21:20.204 - info: blebox.0 (3855) State value to set for "blebox.0.Teich.tempSensor.sensors.0.id" has to be type "string" but received type "number"
2023-05-16 21:21:20.342 - debug: reolink.0 (4158) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 21:21:20.670 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Accessory-Information.Firmware-Revision {"val":"2.2.6","ack":true,"ts":1684264707866,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1667587286484}
2023-05-16 21:21:20.709 - debug: reolink.0 (4158) Motion Detection value: 0
2023-05-16 21:21:20.744 - info: ham.0 (3617) updateChannel Temperatur-Einstellung.Thermostat: name =
2023-05-16 21:21:20.917 - info: ham.0 (3617) updateState Temperatur-Einstellung.Thermostat.Current-Heating-Cooling-State: value = 1 /common= {"type":"number","min":0,"max":2,"read":true,"write":false,"role":"value","name":"Current Heating Cooling State","unit":""}
2023-05-16 21:21:21.015 - info: tuya.1 (3520) bfed8326787ed29axxxtot: Connect locally to device
2023-05-16 21:21:21.018 - info: tuya.1 (3520) bfed8326787ed29axxxtot Init with IP=192.168.178.xxx, Key=51d7af4a1464d114, Version=3.4
2023-05-16 21:21:21.146 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Thermostat.Current-Heating-Cooling-State {"val":1,"ack":true,"ts":1684264881108,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1684261586145}
2023-05-16 21:21:21.205 - info: ham.0 (3617) updateState Temperatur-Einstellung.Thermostat.Target-Heating-Cooling-State: value = 1 /common= {"type":"number","min":0,"max":2,"read":true,"write":true,"role":"level","name":"Target Heating Cooling State","unit":""}
2023-05-16 21:21:21.405 - debug: reolink.0 (4158) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 21:21:21.533 - info: ham.0 (3617) stateChange ham.0.Temperatur-Einstellung.Thermostat.Target-Heating-Cooling-State {"val":1,"ack":true,"ts":1684264881478,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1681646058199}


============ Mark until here for C&P =============

iob diag has finished.

Thomas Braun · Core adapters versions js-controller: 4.0.24 admin: 6.4.4 javascript: 7.0.3

@michihorn

Du solltest die Kiste sauber neustarten, nicht austreten!

Die yarn .list-Datei ist noch vorhanden.

niiccooo1

Hallo Zusammen,

selbes Problem hier.

ring.0
2023-05-16 21:27:55.940	warn	Terminated (UNCAUGHT_EXCEPTION): Without reason

ring.0
2023-05-16 21:27:55.938	info	terminating

ring.0
2023-05-16 21:27:55.934	error	Cannot read properties of undefined (reading 'battery_percentage')

ring.0
2023-05-16 21:27:55.933	error	TypeError: Cannot read properties of undefined (reading 'battery_percentage') at OwnRingDevice.updateHealthObject (/opt/iobroker/node_modules/iobroker.ring/build/lib/ownRingDevice.js:420:52) at process.processTicksAndRejections (node:internal/process/task_queues:95:5)

ring.0
2023-05-16 21:27:55.933	error	unhandled promise rejection: Cannot read properties of undefined (reading 'battery_percentage')

ring.0
2023-05-16 21:27:55.932	error	Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().

ring.0
2023-05-16 21:27:54.544	info	Recieved new Refresh Token. Will use the new one until the token in config gets changed

Mein ioBroker läuft in einem Docker Container. Habe den "Fixer" schon durchlaufen lassen und den Container neu gestartet.

Keine Verbesserung.

Thomas Braun

@niiccooo1

https://github.com/iobroker-community-adapters/ioBroker.ring/issues/525

michihorn

@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:

@michihorn

Du solltest die Kiste sauber neustarten, nicht austreten!

Die yarn .list-Datei ist noch vorhanden.

Jetzt is die sources.list gelöscht

michihorn

@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:

@niiccooo1

https://github.com/iobroker-community-adapters/ioBroker.ring/issues/525

Wir sind nicht allein ;-)

Thomas Braun

@michihorn

Ich hoffe NICHT die /etc/apt/sources.list gelöscht...

ls -lAh /etc/apt

Sauberer Neustart wird überigens mit

sudo reboot

gemacht, nicht durch Stecker ziehen im laufenden Betrieb.

michihorn

@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:

@michihorn

Ich hoffe NICHT die /etc/apt/sources.list gelöscht...
ls -lAh /etc/apt
Sauberer Neustart wird überigens mit
sudo reboot
gemacht, nicht durch Stecker ziehen im laufenden Betrieb.

Doch die ist weg Und nun?
die sources.list.d ist noch da

Thomas Braun

@michihorn

Warum hab ich das eigentlich mehrfach geschrieben?

Thomas Braun

@michihorn sagte in RING Adapter Verbindet sich nicht mehr:

die sources.list.d ist noch da

Das ist keine Datei sondern ein Verzeichnis.

ls -lAh /etc/apt/sources.list.d/

sagt?

michihorn

@thomas-braun habe das .d als schreibfehler angesehen

Thomas Braun

@michihorn

Ich mache selten Schreibfehler...

michihorn

@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:

@michihorn sagte in RING Adapter Verbindet sich nicht mehr:

die sources.list.d ist noch da

Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/
sagt?

root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/
total 12K
-rw-r--r-- 1 root root 208 Oct 26  2022 nodesource.list
-rw-r--r-- 1 root root 191 Feb  3  2022 raspi.list
-rw-r--r-- 1 root root  90 Oct 26  2022 yarn.list
root@iobroker-pi:/etc/apt#

Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?

Thomas Braun

@michihorn yarn.list solltest du löschen, nicht die sources.list

Vielleicht kann dir jemand seine sources.list von seinem pi4/32bit zur Verfügung stellen. Meine kannst du nicht haben, die passt hinten und vorne nicht zu deinem System.

DJMarc75

@michihorn sagte in RING Adapter Verbindet sich nicht mehr:

root@iobroker

Wie oft muss man Dir das eigentlich noch so erklären ?

Gleiches mit "Text in Codetags packen" ;)

Thomas Braun

@michihorn

Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.

Ich bin dann auch raus hier.

michihorn

@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:

@michihorn

Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.

Ich bin dann auch raus hier.

YARN.list ist jetzt raus und sources.list wieder da

Thomas Braun

@michihorn

iob diag

michihorn

@thomas-braun

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.5
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 23:04:25 up 21 min,  1 user,  load average: 1.65, 1.45, 1.65
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=45.2'C
volt=0.9360V

*** Time and Time Zones ***
               Local time: Tue 2023-05-16 23:04:25 CEST
           Universal time: Tue 2023-05-16 21:04:25 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: n/a
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp                                                                                                                                                             io i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.9G        2.7G        4.7G        0.0K        527M        5.1G
Swap:            99M          0B         99M
Total:          8.0G        2.7G        4.8G

         7862 M total memory
         2675 M used memory
         2670 M active memory
          365 M inactive memory
         4658 M free memory
           65 M buffer memory
          462 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       59G   15G   42G  26% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  788K  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   51M  202M  20% /boot
tmpfs          tmpfs     787M     0  787M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue May 16 22:42:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0                                                                                                                                                              snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena                                                                                                                                                             ble_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:FE:87:59 vc_mem.                                                                                                                                                             mem_base=0x3f000000 vc_mem.mem_size=0x3f600000  console=ttyS0,115200 console=tty                                                                                                                                                             1 root=PARTUUID=4c91ec57-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue May 16 22:42:41 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered                                                                                                                                                              data mode. Quota mode: none.
[Tue May 16 22:42:41 2023] VFS: Mounted root (ext4 filesystem) readonly on devic                                                                                                                                                             e 179:2.
[Tue May 16 22:42:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,ioc                                                                                                                                                             harset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
2.3G    /var/
2.0G    /var/log
1.8G    /var/log/journal/e2b5e5db604543deab373d50adc66fa2
1.8G    /var/log/journal
96M     /var/cache

Archived and active journals take up 1.7G in the file system.

/opt/iobroker/backups:
963M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
3.0G    /opt/iobroker/iobroker-data/
2.3G    /opt/iobroker/iobroker-data/files
1.6G    /opt/iobroker/iobroker-data/files/ring.0
910M    /opt/iobroker/iobroker-data/files/ring.0/doorbell_90474299
560M    /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
67M     /opt/iobroker/iobroker-data/backups/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz
67M     /opt/iobroker/iobroker-data/backup-objects/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz
41M     /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map
34M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.de9334af.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.4.4
javascript:     7.0.3

Adapters from github:   9

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker-pi                              -  enabled, port: 8111, bind: 192.168.178.144, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker-pi                              -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker-pi                              -  enabled
+ system.adapter.blebox.0                 : blebox                : iobroker-pi                              -  enabled
+ system.adapter.cloud.0                  : cloud                 : iobroker-pi                              -  enabled
  system.adapter.coronavirus-statistics.0 : coronavirus-statistics: iobroker-pi                              - disabled
  system.adapter.daswetter.0              : daswetter             : iobroker-pi                              -  enabled
  system.adapter.daswetter.1              : daswetter             : iobroker-pi                              -  enabled
+ system.adapter.device-reminder.0        : device-reminder       : iobroker-pi                              -  enabled
  system.adapter.device-watcher.0         : device-watcher        : iobroker-pi                              - disabled
  system.adapter.discovery.0              : discovery             : iobroker-pi                              - disabled
  system.adapter.dwd.0                    : dwd                   : iobroker-pi                              -  enabled
+ system.adapter.echarts.0                : echarts               : iobroker-pi                              -  enabled
  system.adapter.feiertage.0              : feiertage             : iobroker-pi                              -  enabled
+ system.adapter.fritzbox.0               : fritzbox              : iobroker-pi                              -  enabled
+ system.adapter.fully-tablet-control.0   : fully-tablet-control  : iobroker-pi                              -  enabled
+ system.adapter.ham.0                    : ham                   : iobroker-pi                              -  enabled
+ system.adapter.history.0                : history               : iobroker-pi                              -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : iobroker-pi                              -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker-pi                              -  enabled, port: 12001
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker-pi                              -  enabled, port: 18701
+ system.adapter.hm-rpc.2                 : hm-rpc                : iobroker-pi                              -  enabled, port: 12010
+ system.adapter.hue.0                    : hue                   : iobroker-pi                              -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : iobroker-pi                              -  enabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker-pi                              -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : iobroker-pi                              -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : iobroker-pi                              -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker-pi                              -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker-pi                              -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker-pi                              -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : iobroker-pi                              -  enabled
+ system.adapter.info.0                   : info                  : iobroker-pi                              -  enabled
+ system.adapter.iot.0                    : iot                   : iobroker-pi                              -  enabled
+ system.adapter.iot.1                    : iot                   : iobroker-pi                              -  enabled
+ system.adapter.iot.2                    : iot                   : iobroker-pi                              -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker-pi                              -  enabled
+ system.adapter.javascript.1             : javascript            : iobroker-pi                              -  enabled
+ system.adapter.javascript.2             : javascript            : iobroker-pi                              -  enabled
+ system.adapter.javascript.3             : javascript            : iobroker-pi                              -  enabled
  system.adapter.material.0               : material              : iobroker-pi                              -  enabled
+ system.adapter.mqtt-client.0            : mqtt-client           : iobroker-pi                              -  enabled, port: 1883
+ system.adapter.mqtt.0                   : mqtt                  : iobroker-pi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.parcel.0                 : parcel                : iobroker-pi                              -  enabled
+ system.adapter.ping.0                   : ping                  : iobroker-pi                              -  enabled
+ system.adapter.pollenflug.0             : pollenflug            : iobroker-pi                              -  enabled
+ system.adapter.psa.0                    : psa                   : iobroker-pi                              -  enabled
+ system.adapter.reolink.0                : reolink               : iobroker-pi                              -  enabled
  system.adapter.ring.0                   : ring                  : iobroker-pi                              -  enabled
+ system.adapter.simple-api.0             : simple-api            : iobroker-pi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartgarden.0            : smartgarden           : iobroker-pi                              -  enabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : iobroker-pi                              -  enabled
+ system.adapter.tahoma.0                 : tahoma                : iobroker-pi                              -  enabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : iobroker-pi                              -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker-pi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.time-switch.0            : time-switch           : iobroker-pi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : iobroker-pi                              -  enabled
+ system.adapter.tuya.1                   : tuya                  : iobroker-pi                              -  enabled
+ system.adapter.vaillant.0               : vaillant              : iobroker-pi                              -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : iobroker-pi                              -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker-pi                              -  enabled
  system.adapter.vis-google-fonts.0       : vis-google-fonts      : iobroker-pi                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker-pi                              -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker-pi                              -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker-pi                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker-pi                              -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : iobroker-pi                              -  enabled
  system.adapter.vis-keyboard.0           : vis-keyboard          : iobroker-pi                              -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : iobroker-pi                              -  enabled
  system.adapter.vis-material.0           : vis-material          : iobroker-pi                              -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : iobroker-pi                              -  enabled
  system.adapter.vis-metro.0              : vis-metro             : iobroker-pi                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker-pi                              -  enabled
  system.adapter.vis-weather.0            : vis-weather           : iobroker-pi                              -  enabled
  system.adapter.vis.0                    : vis                   : iobroker-pi                              -  enabled
+ system.adapter.web.0                    : web                   : iobroker-pi                              -  enabled, port: 9082, bind: 192.168.178.xxx, run as: admin
  system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : iobroker-pi                              - disabled
+ system.adapter.ws.0                     : ws                    : iobroker-pi                              -  enabled, port: 8089, bind: 192.168.178.xxx, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker-pi                              -  enabled, port: tcp://192.168.178.xxx:6638
+ system.adapter.zigbee.1                 : zigbee                : iobroker-pi                              -  enabled, port: tcp://192.168.178.xxx:6638
+ system.adapter.zigbee.3                 : zigbee                : iobroker-pi                              -  enabled, port: tcp://192.168.178.xxx:6638

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker-pi                              -  enabled, port: 8111, bind: 192.168.178.xxx, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : iobroker-pi                              -  enabled, port: 12001
+ system.adapter.hm-rpc.1                 : hm-rpc                : iobroker-pi                              -  enabled, port: 18701
+ system.adapter.hm-rpc.2                 : hm-rpc                : iobroker-pi                              -  enabled, port: 12010
+ system.adapter.hue.0                    : hue                   : iobroker-pi                              -  enabled, port: 443
+ system.adapter.mqtt-client.0            : mqtt-client           : iobroker-pi                              -  enabled, port: 1883
+ system.adapter.mqtt.0                   : mqtt                  : iobroker-pi                              -  enabled, port: 1883, bind: 0.0.xxx.0
+ system.adapter.simple-api.0             : simple-api            : iobroker-pi                              -  enabled, port: 8087, bind: 0.0.xxx.0, run as: admin
+ system.adapter.telegram.0               : telegram              : iobroker-pi                              -  enabled, port: 8443, bind: 0.0.xxx.0
+ system.adapter.web.0                    : web                   : iobroker-pi                              -  enabled, port: 9082, bind: 192.168.178.xxx, run as: admin
+ system.adapter.ws.0                     : ws                    : iobroker-pi                              -  enabled, port: 8089, bind: 192.168.178.xxx, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker-pi                              -  enabled, port: tcp://192.168.178.xxx:6638
+ system.adapter.zigbee.1                 : zigbee                : iobroker-pi                              -  enabled, port: tcp://192.168.178.xxx:6638
+ system.adapter.zigbee.3                 : zigbee                : iobroker-pi                              -  enabled, port: tcp://192.168.178.xxx:6638

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.4.4    , installed 6.4.4
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.20   , installed 2.6.20
Adapter    "blebox"       : 2.0.1    , installed 2.0.1
Adapter    "cloud"        : 4.4.1    , installed 4.4.1
Adapter    "coronavirus-statistics": 0.8.7, installed 0.8.7
Adapter    "daswetter"    : 3.1.8    , installed 3.1.8
Adapter    "device-reminder": 1.2.9  , installed 1.2.9
Adapter    "device-watcher": 2.9.1   , installed 2.9.1
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "echarts"      : 1.4.15   , installed 1.4.15
Adapter    "elero-usb-transmitter": 0.5.2, installed 0.5.2
Adapter    "feiertage"    : 1.1.0    , installed 1.1.0
Adapter    "fritzbox"     : 0.5.0    , installed 0.5.0
Adapter    "ham"          : 5.3.1    , installed 5.3.1
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.18  , installed 1.15.18
Adapter    "hue"          : 3.7.1    , installed 3.7.1
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "iot"          : 1.14.5   , installed 1.14.5
Adapter    "javascript"   : 7.0.3    , installed 7.0.3
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "material"     : 1.3.1    , installed 1.3.1
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "mqtt-client"  : 1.6.3    , installed 1.6.3
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "ocpp"         : 0.12.5   , installed 0.12.5
Adapter    "onvif"        : 1.0.5    , installed 1.0.5
Adapter    "openweathermap": 0.3.8   , installed 0.3.8
Adapter    "parcel"       : 0.0.28   , installed 0.0.28
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pollenflug"   : 1.0.6    , installed 1.0.6
Adapter    "psa"          : 0.0.11   , installed 0.0.11
Adapter    "ring"         : 3.3.0    , installed 3.3.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "smartgarden"  : 2.0.0    , installed 2.0.0
Adapter    "socketio"     : 6.3.5    , installed 6.3.5
Adapter    "sourceanalytix": 0.4.14  , installed 0.4.14
Adapter    "tahoma"       : 0.10.2   , installed 0.10.2
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.15.6   , installed 1.15.6
Adapter    "time-switch"  : 2.2.2    , installed 2.2.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "tuya"         : 3.14.2   , installed 3.14.2
Adapter    "vaillant"     : 0.1.2    , installed 0.1.2
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-2-widgets-energy": 0.1.12, installed 0.1.12
Adapter    "vis-2-widgets-gauges": 0.1.12, installed 0.1.12
Adapter    "vis-2-widgets-jaeger-design": 0.3.2, installed 0.3.2
Adapter    "vis-2-widgets-material": 0.2.13, installed 0.2.13
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-google-fonts": 1.0.4 , installed 1.0.4
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.94.0   , installed 0.94.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-keyboard" : 0.0.2    , installed 0.0.2
Adapter    "vis-material" : 0.1.3    , installed 0.1.3
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.94
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "web"          : 5.5.3    , installed 5.5.3
Adapter    "whatsapp-cmb" : 0.2.3    , installed 0.2.3
Adapter    "ws"           : 2.3.6    , installed 2.3.6
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        31972
States:         27169

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.xxx:1883            0.0.0.0:*               LISTEN      1001       16572      1038/io.mqtt.0
tcp        0      0 192.168.178.xxx:12001   0.0.0.0:*               LISTEN      1001       18520      868/io.hm-rpc.0
tcp        0      0 192.168.178.xxx:12010   0.0.0.0:*               LISTEN      1001       18527      896/io.hm-rpc.2
tcp        0      0 192.168.178.xxx:8089    0.0.0.0:*               LISTEN      1001       17263      1558/io.ws.0
tcp        0      0 192.168.178.xxx:8111    0.0.0.0:*               LISTEN      1001       13072      698/io.admin.0
tcp        0      0 127.0.0.xxx:9001          0.0.0.0:*               LISTEN      1001       11933      489/iobroker.js-con
tcp        0      0 127.0.0.xxx:9000          0.0.0.0:*               LISTEN      1001       12965      489/iobroker.js-con
tcp        0      0 192.168.178.xxx:18701   0.0.0.0:*               LISTEN      1001       15735      875/io.hm-rpc.1
tcp        0      0 0.0.0.xxx:22              0.0.0.0:*               LISTEN      0          12862      525/sshd: /usr/sbin
tcp        0      0 192.168.178.xxx:9082    0.0.0.0:*               LISTEN      1001       16241      1147/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          12864      525/sshd: /usr/sbin
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       19827      1618/io.simple-api.
udp        0      0 0.0.0.xxx:xxx             0.0.0.0:*                           0          11099      696/dhcpcd
udp        0      0 192.168.178.xxx:123     0.0.0.0:*                           109        13011      512/ntpd
udp        0      0 127.0.0.xxx:xxx           0.0.0.0:*                           0          12837      512/ntpd
udp        0      0 0.0.0.0:xxx             0.0.0.0:*                           0          12833      512/ntpd
udp        0      0 0.0.0.0:xxx           0.0.0.0:*                           108        12702      354/avahi-daemon: r
udp        0      0 0.0.0.0:xxx            0.0.0.0:*                           108        12700      354/avahi-daemon: r
udp        0      0 0.0.0.0:xxx            0.0.0.0:*                           1001       19128      991/io.tuya.1
udp        0      0 0.0.0.0:xxx            0.0.0.0:*                           1001       19129      991/io.tuya.1
udp6       0      0 2a02:908:xxx:e560:b:123 :::*                                109        13051      512/ntpd
udp6       0      0 fe80::53bb:xxx:907:123 :::*                                109        12919      512/ntpd
udp6       0      0 ::1:xxx                :::*                                0          12839      512/ntpd
udp6       0      0 :::xxx                  :::*                                0          12830      512/ntpd
udp6       0      0 :::xxx                  :::*                                0          11115      696/dhcpcd
udp6       0      0 :::xxx                 :::*                                108        12701      354/avahi-daemon: r
udp6       0      0 :::5xx6                :::*                                108        12703      354/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-05-16 23:05:47.772  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:47.852  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:48.710  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:48.766  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:49.772  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:49.784  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:50.048  - info: blebox.0 (1278) State value to set for "blebox.0.Teich.tempSensor.sensors.0.id" has to be type "string" but received type "number"
2023-05-16 23:05:50.699  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:50.731  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:51.793  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:51.867  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:52.812  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:52.826  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:53.760  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:53.774  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:54.849  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:54.859  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:55.748  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:55.758  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:56.755  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:56.773  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:57.728  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:57.738  - debug: reolink.0 (1584) Motion Detection value: 0
2023-05-16 23:05:58.828  - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}]
2023-05-16 23:05:58.931  - debug: reolink.0 (1584) Motion Detection value: 0

============ Mark until here for C&P =============

iob diag has finished.

Thomas Braun

@michihorn

Künftig regelmäßig Updates fahren und den root in Ruhe lassen.

Community Forum

NEWS

RING Adapter Verbindet sich nicht mehr

Support us

459

32.8k

82.9k

1.3m