- ioBroker Community Home
- Deutsch
- ioBroker Allgemein
- RING Adapter Verbindet sich nicht mehr
RING Adapter Verbindet sich nicht mehr
Geplant
Angeheftet
Gesperrt
Verschoben
ioBroker Allgemein
41
Beiträge
5
Kommentatoren
1.6k
Aufrufe
4
Beobachtet
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
-
Warum hab ich das eigentlich mehrfach geschrieben?
@thomas-braun habe das .d als schreibfehler angesehen
-
@thomas-braun habe das .d als schreibfehler angesehen
-
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/ total 12K -rw-r--r-- 1 root root 208 Oct 26 2022 nodesource.list -rw-r--r-- 1 root root 191 Feb 3 2022 raspi.list -rw-r--r-- 1 root root 90 Oct 26 2022 yarn.list root@iobroker-pi:/etc/apt#Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?
-
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/ total 12K -rw-r--r-- 1 root root 208 Oct 26 2022 nodesource.list -rw-r--r-- 1 root root 191 Feb 3 2022 raspi.list -rw-r--r-- 1 root root 90 Oct 26 2022 yarn.list root@iobroker-pi:/etc/apt#Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?
@michihorn yarn.list solltest du löschen, nicht die sources.list
Vielleicht kann dir jemand seine sources.list von seinem pi4/32bit zur Verfügung stellen. Meine kannst du nicht haben, die passt hinten und vorne nicht zu deinem System.
-
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/ total 12K -rw-r--r-- 1 root root 208 Oct 26 2022 nodesource.list -rw-r--r-- 1 root root 191 Feb 3 2022 raspi.list -rw-r--r-- 1 root root 90 Oct 26 2022 yarn.list root@iobroker-pi:/etc/apt#Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
root@iobroker
Wie oft muss man Dir das eigentlich noch so erklären ?
Gleiches mit "Text in Codetags packen" ;)
Lehrling seit 1975 !!!
Beitrag geholfen ? dann gerne ein upvote rechts unten im Beitrag klicken ;)
https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge -
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
@michihorn sagte in RING Adapter Verbindet sich nicht mehr:
die sources.list.d ist noch da
Das ist keine Datei sondern ein Verzeichnis.
ls -lAh /etc/apt/sources.list.d/sagt?
root@iobroker-pi:/etc/apt# root@iobroker-pi:/etc/apt# ls -lAh /etc/apt/sources.list.d/ total 12K -rw-r--r-- 1 root root 208 Oct 26 2022 nodesource.list -rw-r--r-- 1 root root 191 Feb 3 2022 raspi.list -rw-r--r-- 1 root root 90 Oct 26 2022 yarn.list root@iobroker-pi:/etc/apt#Ich habe noch einen PI4 der fast gleich aufgebaut ist, kann ich die Datei rüber kopieren? Wohl eher nicht?!?
Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.
Ich bin dann auch raus hier.
-
Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.
Ich bin dann auch raus hier.
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.
Ich bin dann auch raus hier.
YARN.list ist jetzt raus und sources.list wieder da
-
@thomas-braun sagte in RING Adapter Verbindet sich nicht mehr:
Und den Scheiß mit dem root kannste dir auch gleich abgewöhnen.
Ich bin dann auch raus hier.
YARN.list ist jetzt raus und sources.list wieder da
-
iob diag
======== Start marking the full check here =========Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 23:04:25 up 21 min, 1 user, load average: 1.65, 1.45, 1.65 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=45.2'C volt=0.9360V *** Time and Time Zones *** Local time: Tue 2023-05-16 23:04:25 CEST Universal time: Tue 2023-05-16 21:04:25 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp io i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 2.7G 4.7G 0.0K 527M 5.1G Swap: 99M 0B 99M Total: 8.0G 2.7G 4.8G 7862 M total memory 2675 M used memory 2670 M active memory 365 M inactive memory 4658 M free memory 65 M buffer memory 462 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 15G 42G 26% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 788K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 787M 0 787M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue May 16 22:42:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:FE:87:59 vc_mem. mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty 1 root=PARTUUID=4c91ec57-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue May 16 22:42:41 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue May 16 22:42:41 2023] VFS: Mounted root (ext4 filesystem) readonly on devic e 179:2. [Tue May 16 22:42:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,ioc harset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 2.3G /var/ 2.0G /var/log 1.8G /var/log/journal/e2b5e5db604543deab373d50adc66fa2 1.8G /var/log/journal 96M /var/cache Archived and active journals take up 1.7G in the file system. /opt/iobroker/backups: 963M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.0G /opt/iobroker/iobroker-data/ 2.3G /opt/iobroker/iobroker-data/files 1.6G /opt/iobroker/iobroker-data/files/ring.0 910M /opt/iobroker/iobroker-data/files/ring.0/doorbell_90474299 560M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 67M /opt/iobroker/iobroker-data/backups/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz 67M /opt/iobroker/iobroker-data/backup-objects/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 34M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.de9334af.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.4.4 javascript: 7.0.3 Adapters from github: 9 Adapter State + system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.144, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker-pi - enabled + system.adapter.backitup.0 : backitup : iobroker-pi - enabled + system.adapter.blebox.0 : blebox : iobroker-pi - enabled + system.adapter.cloud.0 : cloud : iobroker-pi - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: iobroker-pi - disabled system.adapter.daswetter.0 : daswetter : iobroker-pi - enabled system.adapter.daswetter.1 : daswetter : iobroker-pi - enabled + system.adapter.device-reminder.0 : device-reminder : iobroker-pi - enabled system.adapter.device-watcher.0 : device-watcher : iobroker-pi - disabled system.adapter.discovery.0 : discovery : iobroker-pi - disabled system.adapter.dwd.0 : dwd : iobroker-pi - enabled + system.adapter.echarts.0 : echarts : iobroker-pi - enabled system.adapter.feiertage.0 : feiertage : iobroker-pi - enabled + system.adapter.fritzbox.0 : fritzbox : iobroker-pi - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker-pi - enabled + system.adapter.ham.0 : ham : iobroker-pi - enabled + system.adapter.history.0 : history : iobroker-pi - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker-pi - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701 + system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010 + system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443 system.adapter.ical.0 : ical : iobroker-pi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker-pi - enabled system.adapter.icons-icons8.0 : icons-icons8 : iobroker-pi - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker-pi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker-pi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker-pi - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker-pi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker-pi - enabled + system.adapter.info.0 : info : iobroker-pi - enabled + system.adapter.iot.0 : iot : iobroker-pi - enabled + system.adapter.iot.1 : iot : iobroker-pi - enabled + system.adapter.iot.2 : iot : iobroker-pi - enabled + system.adapter.javascript.0 : javascript : iobroker-pi - enabled + system.adapter.javascript.1 : javascript : iobroker-pi - enabled + system.adapter.javascript.2 : javascript : iobroker-pi - enabled + system.adapter.javascript.3 : javascript : iobroker-pi - enabled system.adapter.material.0 : material : iobroker-pi - enabled + system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.parcel.0 : parcel : iobroker-pi - enabled + system.adapter.ping.0 : ping : iobroker-pi - enabled + system.adapter.pollenflug.0 : pollenflug : iobroker-pi - enabled + system.adapter.psa.0 : psa : iobroker-pi - enabled + system.adapter.reolink.0 : reolink : iobroker-pi - enabled system.adapter.ring.0 : ring : iobroker-pi - enabled + system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker-pi - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker-pi - enabled + system.adapter.tahoma.0 : tahoma : iobroker-pi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker-pi - enabled + system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.time-switch.0 : time-switch : iobroker-pi - enabled + system.adapter.tr-064.0 : tr-064 : iobroker-pi - enabled + system.adapter.tuya.1 : tuya : iobroker-pi - enabled + system.adapter.vaillant.0 : vaillant : iobroker-pi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker-pi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker-pi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker-pi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker-pi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker-pi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker-pi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker-pi - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker-pi - enabled system.adapter.vis-keyboard.0 : vis-keyboard : iobroker-pi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker-pi - enabled system.adapter.vis-material.0 : vis-material : iobroker-pi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker-pi - enabled system.adapter.vis-metro.0 : vis-metro : iobroker-pi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker-pi - enabled system.adapter.vis-weather.0 : vis-weather : iobroker-pi - enabled system.adapter.vis.0 : vis : iobroker-pi - enabled + system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker-pi - disabled + system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.xxx, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701 + system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010 + system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443 + system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.xxx.0 + system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.xxx.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.xxx.0 + system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin + system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.4.4 , installed 6.4.4 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.20 , installed 2.6.20 Adapter "blebox" : 2.0.1 , installed 2.0.1 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7 Adapter "daswetter" : 3.1.8 , installed 3.1.8 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "device-watcher": 2.9.1 , installed 2.9.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "echarts" : 1.4.15 , installed 1.4.15 Adapter "elero-usb-transmitter": 0.5.2, installed 0.5.2 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ocpp" : 0.12.5 , installed 0.12.5 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "openweathermap": 0.3.8 , installed 0.3.8 Adapter "parcel" : 0.0.28 , installed 0.0.28 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "ring" : 3.3.0 , installed 3.3.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.3.5 , installed 6.3.5 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "tahoma" : 0.10.2 , installed 0.10.2 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "time-switch" : 2.2.2 , installed 2.2.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vaillant" : 0.1.2 , installed 0.1.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-2-widgets-energy": 0.1.12, installed 0.1.12 Adapter "vis-2-widgets-gauges": 0.1.12, installed 0.1.12 Adapter "vis-2-widgets-jaeger-design": 0.3.2, installed 0.3.2 Adapter "vis-2-widgets-material": 0.2.13, installed 0.2.13 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.94.0 , installed 0.94.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 5.5.3 , installed 5.5.3 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.3.6 , installed 2.3.6 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 31972 States: 27169 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.xxx:1883 0.0.0.0:* LISTEN 1001 16572 1038/io.mqtt.0 tcp 0 0 192.168.178.xxx:12001 0.0.0.0:* LISTEN 1001 18520 868/io.hm-rpc.0 tcp 0 0 192.168.178.xxx:12010 0.0.0.0:* LISTEN 1001 18527 896/io.hm-rpc.2 tcp 0 0 192.168.178.xxx:8089 0.0.0.0:* LISTEN 1001 17263 1558/io.ws.0 tcp 0 0 192.168.178.xxx:8111 0.0.0.0:* LISTEN 1001 13072 698/io.admin.0 tcp 0 0 127.0.0.xxx:9001 0.0.0.0:* LISTEN 1001 11933 489/iobroker.js-con tcp 0 0 127.0.0.xxx:9000 0.0.0.0:* LISTEN 1001 12965 489/iobroker.js-con tcp 0 0 192.168.178.xxx:18701 0.0.0.0:* LISTEN 1001 15735 875/io.hm-rpc.1 tcp 0 0 0.0.0.xxx:22 0.0.0.0:* LISTEN 0 12862 525/sshd: /usr/sbin tcp 0 0 192.168.178.xxx:9082 0.0.0.0:* LISTEN 1001 16241 1147/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 12864 525/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 19827 1618/io.simple-api. udp 0 0 0.0.0.xxx:xxx 0.0.0.0:* 0 11099 696/dhcpcd udp 0 0 192.168.178.xxx:123 0.0.0.0:* 109 13011 512/ntpd udp 0 0 127.0.0.xxx:xxx 0.0.0.0:* 0 12837 512/ntpd udp 0 0 0.0.0.0:xxx 0.0.0.0:* 0 12833 512/ntpd udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 12702 354/avahi-daemon: r udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 12700 354/avahi-daemon: r udp 0 0 0.0.0.0:xxx 0.0.0.0:* 1001 19128 991/io.tuya.1 udp 0 0 0.0.0.0:xxx 0.0.0.0:* 1001 19129 991/io.tuya.1 udp6 0 0 2a02:908:xxx:e560:b:123 :::* 109 13051 512/ntpd udp6 0 0 fe80::53bb:xxx:907:123 :::* 109 12919 512/ntpd udp6 0 0 ::1:xxx :::* 0 12839 512/ntpd udp6 0 0 :::xxx :::* 0 12830 512/ntpd udp6 0 0 :::xxx :::* 0 11115 696/dhcpcd udp6 0 0 :::xxx :::* 108 12701 354/avahi-daemon: r udp6 0 0 :::5xx6 :::* 108 12703 354/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-05-16 23:05:47.772 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:47.852 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:48.710 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:48.766 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:49.772 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:49.784 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:50.048 - info: blebox.0 (1278) State value to set for "blebox.0.Teich.tempSensor.sensors.0.id" has to be type "string" but received type "number" 2023-05-16 23:05:50.699 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:50.731 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:51.793 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:51.867 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:52.812 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:52.826 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:53.760 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:53.774 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:54.849 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:54.859 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:55.748 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:55.758 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:56.755 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:56.773 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:57.728 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:57.738 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:58.828 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:58.931 - debug: reolink.0 (1584) Motion Detection value: 0============ Mark until here for C&P =============
iob diag has finished.
-
======== Start marking the full check here =========Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 23:04:25 up 21 min, 1 user, load average: 1.65, 1.45, 1.65 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=45.2'C volt=0.9360V *** Time and Time Zones *** Local time: Tue 2023-05-16 23:04:25 CEST Universal time: Tue 2023-05-16 21:04:25 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: n/a RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp io i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 2.7G 4.7G 0.0K 527M 5.1G Swap: 99M 0B 99M Total: 8.0G 2.7G 4.8G 7862 M total memory 2675 M used memory 2670 M active memory 365 M inactive memory 4658 M free memory 65 M buffer memory 462 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 59G 15G 42G 26% / devtmpfs devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 788K 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 787M 0 787M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue May 16 22:42:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:FE:87:59 vc_mem. mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 console=ttyS0,115200 console=tty 1 root=PARTUUID=4c91ec57-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue May 16 22:42:41 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue May 16 22:42:41 2023] VFS: Mounted root (ext4 filesystem) readonly on devic e 179:2. [Tue May 16 22:42:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,ioc harset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 2.3G /var/ 2.0G /var/log 1.8G /var/log/journal/e2b5e5db604543deab373d50adc66fa2 1.8G /var/log/journal 96M /var/cache Archived and active journals take up 1.7G in the file system. /opt/iobroker/backups: 963M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.0G /opt/iobroker/iobroker-data/ 2.3G /opt/iobroker/iobroker-data/files 1.6G /opt/iobroker/iobroker-data/files/ring.0 910M /opt/iobroker/iobroker-data/files/ring.0/doorbell_90474299 560M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 67M /opt/iobroker/iobroker-data/backups/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz 67M /opt/iobroker/iobroker-data/backup-objects/iobroker_2022_12_20-17_08_17_backupiobroker.tar.gz 41M /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map 34M /opt/iobroker/iobroker-data/objects.jsonl 23M /opt/iobroker/iobroker-data/files/echarts/static/js/main.de9334af.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.4.4 javascript: 7.0.3 Adapters from github: 9 Adapter State + system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.144, run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker-pi - enabled + system.adapter.backitup.0 : backitup : iobroker-pi - enabled + system.adapter.blebox.0 : blebox : iobroker-pi - enabled + system.adapter.cloud.0 : cloud : iobroker-pi - enabled system.adapter.coronavirus-statistics.0 : coronavirus-statistics: iobroker-pi - disabled system.adapter.daswetter.0 : daswetter : iobroker-pi - enabled system.adapter.daswetter.1 : daswetter : iobroker-pi - enabled + system.adapter.device-reminder.0 : device-reminder : iobroker-pi - enabled system.adapter.device-watcher.0 : device-watcher : iobroker-pi - disabled system.adapter.discovery.0 : discovery : iobroker-pi - disabled system.adapter.dwd.0 : dwd : iobroker-pi - enabled + system.adapter.echarts.0 : echarts : iobroker-pi - enabled system.adapter.feiertage.0 : feiertage : iobroker-pi - enabled + system.adapter.fritzbox.0 : fritzbox : iobroker-pi - enabled + system.adapter.fully-tablet-control.0 : fully-tablet-control : iobroker-pi - enabled + system.adapter.ham.0 : ham : iobroker-pi - enabled + system.adapter.history.0 : history : iobroker-pi - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker-pi - enabled + system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701 + system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010 + system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443 system.adapter.ical.0 : ical : iobroker-pi - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: iobroker-pi - enabled system.adapter.icons-icons8.0 : icons-icons8 : iobroker-pi - enabled system.adapter.icons-material-png.0 : icons-material-png : iobroker-pi - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : iobroker-pi - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker-pi - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: iobroker-pi - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : iobroker-pi - enabled + system.adapter.info.0 : info : iobroker-pi - enabled + system.adapter.iot.0 : iot : iobroker-pi - enabled + system.adapter.iot.1 : iot : iobroker-pi - enabled + system.adapter.iot.2 : iot : iobroker-pi - enabled + system.adapter.javascript.0 : javascript : iobroker-pi - enabled + system.adapter.javascript.1 : javascript : iobroker-pi - enabled + system.adapter.javascript.2 : javascript : iobroker-pi - enabled + system.adapter.javascript.3 : javascript : iobroker-pi - enabled system.adapter.material.0 : material : iobroker-pi - enabled + system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.parcel.0 : parcel : iobroker-pi - enabled + system.adapter.ping.0 : ping : iobroker-pi - enabled + system.adapter.pollenflug.0 : pollenflug : iobroker-pi - enabled + system.adapter.psa.0 : psa : iobroker-pi - enabled + system.adapter.reolink.0 : reolink : iobroker-pi - enabled system.adapter.ring.0 : ring : iobroker-pi - enabled + system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker-pi - enabled + system.adapter.sourceanalytix.0 : sourceanalytix : iobroker-pi - enabled + system.adapter.tahoma.0 : tahoma : iobroker-pi - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker-pi - enabled + system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.time-switch.0 : time-switch : iobroker-pi - enabled + system.adapter.tr-064.0 : tr-064 : iobroker-pi - enabled + system.adapter.tuya.1 : tuya : iobroker-pi - enabled + system.adapter.vaillant.0 : vaillant : iobroker-pi - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker-pi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : iobroker-pi - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : iobroker-pi - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker-pi - enabled system.adapter.vis-icontwo.0 : vis-icontwo : iobroker-pi - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : iobroker-pi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : iobroker-pi - enabled system.adapter.vis-justgage.0 : vis-justgage : iobroker-pi - enabled system.adapter.vis-keyboard.0 : vis-keyboard : iobroker-pi - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker-pi - enabled system.adapter.vis-material.0 : vis-material : iobroker-pi - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : iobroker-pi - enabled system.adapter.vis-metro.0 : vis-metro : iobroker-pi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker-pi - enabled system.adapter.vis-weather.0 : vis-weather : iobroker-pi - enabled system.adapter.vis.0 : vis : iobroker-pi - enabled + system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker-pi - disabled + system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker-pi - enabled, port: 8111, bind: 192.168.178.xxx, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : iobroker-pi - enabled, port: 12001 + system.adapter.hm-rpc.1 : hm-rpc : iobroker-pi - enabled, port: 18701 + system.adapter.hm-rpc.2 : hm-rpc : iobroker-pi - enabled, port: 12010 + system.adapter.hue.0 : hue : iobroker-pi - enabled, port: 443 + system.adapter.mqtt-client.0 : mqtt-client : iobroker-pi - enabled, port: 1883 + system.adapter.mqtt.0 : mqtt : iobroker-pi - enabled, port: 1883, bind: 0.0.xxx.0 + system.adapter.simple-api.0 : simple-api : iobroker-pi - enabled, port: 8087, bind: 0.0.xxx.0, run as: admin + system.adapter.telegram.0 : telegram : iobroker-pi - enabled, port: 8443, bind: 0.0.xxx.0 + system.adapter.web.0 : web : iobroker-pi - enabled, port: 9082, bind: 192.168.178.xxx, run as: admin + system.adapter.ws.0 : ws : iobroker-pi - enabled, port: 8089, bind: 192.168.178.xxx, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.1 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 + system.adapter.zigbee.3 : zigbee : iobroker-pi - enabled, port: tcp://192.168.178.xxx:6638 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): beta Installed ioBroker-Instances Used repository: beta Adapter "admin" : 6.4.4 , installed 6.4.4 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.20 , installed 2.6.20 Adapter "blebox" : 2.0.1 , installed 2.0.1 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "coronavirus-statistics": 0.8.7, installed 0.8.7 Adapter "daswetter" : 3.1.8 , installed 3.1.8 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "device-watcher": 2.9.1 , installed 2.9.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "echarts" : 1.4.15 , installed 1.4.15 Adapter "elero-usb-transmitter": 0.5.2, installed 0.5.2 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "fritzbox" : 0.5.0 , installed 0.5.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hm-rega" : 3.0.46 , installed 3.0.46 Adapter "hm-rpc" : 1.15.18 , installed 1.15.18 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "info" : 1.9.26 , installed 1.9.26 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "material" : 1.3.1 , installed 1.3.1 Adapter "mqtt" : 4.1.1 , installed 4.1.1 Adapter "mqtt-client" : 1.6.3 , installed 1.6.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ocpp" : 0.12.5 , installed 0.12.5 Adapter "onvif" : 1.0.5 , installed 1.0.5 Adapter "openweathermap": 0.3.8 , installed 0.3.8 Adapter "parcel" : 0.0.28 , installed 0.0.28 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "pollenflug" : 1.0.6 , installed 1.0.6 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "ring" : 3.3.0 , installed 3.3.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.3.5 , installed 6.3.5 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "tahoma" : 0.10.2 , installed 0.10.2 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "time-switch" : 2.2.2 , installed 2.2.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "tuya" : 3.14.2 , installed 3.14.2 Adapter "vaillant" : 0.1.2 , installed 0.1.2 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-2-widgets-energy": 0.1.12, installed 0.1.12 Adapter "vis-2-widgets-gauges": 0.1.12, installed 0.1.12 Adapter "vis-2-widgets-jaeger-design": 0.3.2, installed 0.3.2 Adapter "vis-2-widgets-material": 0.2.13, installed 0.2.13 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.94.0 , installed 0.94.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-material" : 0.1.3 , installed 0.1.3 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-materialdesign": 0.5.9, installed 0.5.94 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "web" : 5.5.3 , installed 5.5.3 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "ws" : 2.3.6 , installed 2.3.6 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 31972 States: 27169 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_18.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.xxx:1883 0.0.0.0:* LISTEN 1001 16572 1038/io.mqtt.0 tcp 0 0 192.168.178.xxx:12001 0.0.0.0:* LISTEN 1001 18520 868/io.hm-rpc.0 tcp 0 0 192.168.178.xxx:12010 0.0.0.0:* LISTEN 1001 18527 896/io.hm-rpc.2 tcp 0 0 192.168.178.xxx:8089 0.0.0.0:* LISTEN 1001 17263 1558/io.ws.0 tcp 0 0 192.168.178.xxx:8111 0.0.0.0:* LISTEN 1001 13072 698/io.admin.0 tcp 0 0 127.0.0.xxx:9001 0.0.0.0:* LISTEN 1001 11933 489/iobroker.js-con tcp 0 0 127.0.0.xxx:9000 0.0.0.0:* LISTEN 1001 12965 489/iobroker.js-con tcp 0 0 192.168.178.xxx:18701 0.0.0.0:* LISTEN 1001 15735 875/io.hm-rpc.1 tcp 0 0 0.0.0.xxx:22 0.0.0.0:* LISTEN 0 12862 525/sshd: /usr/sbin tcp 0 0 192.168.178.xxx:9082 0.0.0.0:* LISTEN 1001 16241 1147/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 12864 525/sshd: /usr/sbin tcp6 0 0 :::8087 :::* LISTEN 1001 19827 1618/io.simple-api. udp 0 0 0.0.0.xxx:xxx 0.0.0.0:* 0 11099 696/dhcpcd udp 0 0 192.168.178.xxx:123 0.0.0.0:* 109 13011 512/ntpd udp 0 0 127.0.0.xxx:xxx 0.0.0.0:* 0 12837 512/ntpd udp 0 0 0.0.0.0:xxx 0.0.0.0:* 0 12833 512/ntpd udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 12702 354/avahi-daemon: r udp 0 0 0.0.0.0:xxx 0.0.0.0:* 108 12700 354/avahi-daemon: r udp 0 0 0.0.0.0:xxx 0.0.0.0:* 1001 19128 991/io.tuya.1 udp 0 0 0.0.0.0:xxx 0.0.0.0:* 1001 19129 991/io.tuya.1 udp6 0 0 2a02:908:xxx:e560:b:123 :::* 109 13051 512/ntpd udp6 0 0 fe80::53bb:xxx:907:123 :::* 109 12919 512/ntpd udp6 0 0 ::1:xxx :::* 0 12839 512/ntpd udp6 0 0 :::xxx :::* 0 12830 512/ntpd udp6 0 0 :::xxx :::* 0 11115 696/dhcpcd udp6 0 0 :::xxx :::* 108 12701 354/avahi-daemon: r udp6 0 0 :::5xx6 :::* 108 12703 354/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-05-16 23:05:47.772 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:47.852 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:48.710 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:48.766 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:49.772 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:49.784 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:50.048 - info: blebox.0 (1278) State value to set for "blebox.0.Teich.tempSensor.sensors.0.id" has to be type "string" but received type "number" 2023-05-16 23:05:50.699 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:50.731 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:51.793 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:51.867 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:52.812 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:52.826 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:53.760 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:53.774 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:54.849 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:54.859 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:55.748 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:55.758 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:56.755 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:56.773 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:57.728 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:57.738 - debug: reolink.0 (1584) Motion Detection value: 0 2023-05-16 23:05:58.828 - debug: reolink.0 (1584) camMdStateInfo 200: [{"cmd":"GetMdState","code":0,"value":{"state":0}}] 2023-05-16 23:05:58.931 - debug: reolink.0 (1584) Motion Detection value: 0============ Mark until here for C&P =============
iob diag has finished.
Künftig regelmäßig Updates fahren und den root in Ruhe lassen.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden459
Online32.8k
Benutzer82.9k
Themen1.3m
Beiträge
ioBroker Community 2014-2025
