Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[StealthAngel]

@simatec said in Einstellungen von Shuttercontrol:

@stealthangel Teste bitte mal die v1.4.24 ... Da sollte es egal sein, ob du einen Temperatursensor hast

Jau, damit klappt es. Super, danke.

Allerdings war es jetzt so, dass als sunProtect bei 210° Azimut gestartet wurde ist der Rollladen 3x innerhalb von wenigen Minuten runter und rauf gefahren

2023-04-11 14:55:02.018 - info: shuttercontrol.0 (175760) Sunprotect #416 Set ID: Buero value: 30%
2023-04-11 14:55:02.037 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]
2023-04-11 14:55:29.544 - info: shuttercontrol.0 (175760) Lightsensor #5 Set ID: Buero value: 100%
2023-04-11 14:55:29.552 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]
2023-04-11 14:55:31.535 - info: shuttercontrol.0 (175760) Sunprotect #416 Set ID: Buero value: 30%
2023-04-11 14:55:31.542 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]
2023-04-11 14:57:59.509 - info: shuttercontrol.0 (175760) Lightsensor #5 Set ID: Buero value: 100%
2023-04-11 14:57:59.519 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]
2023-04-11 14:58:01.499 - info: shuttercontrol.0 (175760) Sunprotect #416 Set ID: Buero value: 30%
2023-04-11 14:58:01.505 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]

Das war mit der Version davor nicht. (Obwohl ich gestehen muss, das heute noch zusätzlich "autoDown auf false gesetzt war).

Eine Idee dazu?....

[simatec]

@stealthangel was sagt der Debuglog?

[StealthAngel]

@simatec said in Einstellungen von Shuttercontrol:

@stealthangel was sagt der Debuglog?

2023-04-12 14:50:00.010 - debug: shuttercontrol.0 (179737) calculate astrodata ...
2023-04-12 14:50:00.010 - debug: shuttercontrol.0 (179737) Sun Azimut: 209.5°
2023-04-12 14:50:00.011 - debug: shuttercontrol.0 (179737) Sun Elevation: 43.3°
2023-04-12 14:50:09.334 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 14:52:53.560 - debug: shuttercontrol.0 (179737) Brightness sensor value: 4125
2023-04-12 14:52:53.608 - debug: shuttercontrol.0 (179737) Lightsensor up Buero already up at: 100% - setting current action: up
2023-04-12 14:53:03.561 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 14:55:00.007 - debug: shuttercontrol.0 (179737) calculate astrodata ...
2023-04-12 14:55:00.008 - debug: shuttercontrol.0 (179737) Sun Azimut: 211.1°
2023-04-12 14:55:00.008 - debug: shuttercontrol.0 (179737) Sun Elevation: 42.9°
2023-04-12 14:55:02.018 - debug: shuttercontrol.0 (179737) Buero: Check basis for sunprotect. Height:100 > HeightDownSun: 30 AND Height:100 == currentHeight:100 AND currentHeight:100 == heightUp:100
2023-04-12 14:55:02.019 - info: shuttercontrol.0 (179737) Sunprotect #416 Set ID: Buero value: 30%
2023-04-12 14:55:02.070 - debug: shuttercontrol.0 (179737) #0 wait for shutter check started
2023-04-12 14:55:02.069 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]
2023-04-12 14:55:02.099 - debug: shuttercontrol.0 (179737) Sunprotect for Buero is active
2023-04-12 14:55:02.100 - debug: shuttercontrol.0 (179737) RangeMinus: 210 < 211.1RangePlus: 320 > 211.1
2023-04-12 14:55:02.100 - debug: shuttercontrol.0 (179737) last automatic Action for Buero: down_Sunprotect
2023-04-12 14:55:02.101 - debug: shuttercontrol.0 (179737) Sunprotect Buero old height: 100% new height: 30%
2023-04-12 14:55:22.072 - debug: shuttercontrol.0 (179737) #0 wait for shutter check end
2023-04-12 14:55:22.074 - debug: shuttercontrol.0 (179737) Shutter state changed: Buero old value = 100 new value = 30
2023-04-12 14:55:22.074 - debug: shuttercontrol.0 (179737) #1 shutterName: Buero
2023-04-12 14:55:22.074 - debug: shuttercontrol.0 (179737) #1 shutterState: 30 %
2023-04-12 14:55:22.074 - debug: shuttercontrol.0 (179737) #1 currentAction: Manu_Mode
2023-04-12 14:55:22.075 - debug: shuttercontrol.0 (179737) #1 triggerAction: Manu_Mode
2023-04-12 14:55:22.075 - debug: shuttercontrol.0 (179737) #1 currentHeight: 30 %
2023-04-12 14:55:22.075 - debug: shuttercontrol.0 (179737) #1 oldHeight: 100 %
2023-04-12 14:55:22.075 - debug: shuttercontrol.0 (179737) #1 currentShutterState: activated
2023-04-12 14:55:22.076 - debug: shuttercontrol.0 (179737) #1 currentShutterStateTime: 20 seconds
2023-04-12 14:55:22.127 - debug: shuttercontrol.0 (179737) Buero drived manually to 30. Old value = 100. New value = 30
2023-04-12 14:55:22.127 - debug: shuttercontrol.0 (179737) Buero Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-12 14:55:33.323 - debug: shuttercontrol.0 (179737) Brightness sensor value: 4104
2023-04-12 14:55:33.354 - info: shuttercontrol.0 (179737) Lightsensor #5 Set ID: Buero value: 100%
2023-04-12 14:55:33.361 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]
2023-04-12 14:55:33.362 - debug: shuttercontrol.0 (179737) #0 wait for shutter check started
2023-04-12 14:55:33.419 - debug: shuttercontrol.0 (179737) last automatic Action for Buero: up_Brightness
2023-04-12 14:55:33.420 - debug: shuttercontrol.0 (179737) save current height: 100% from Buero
2023-04-12 14:55:43.325 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 14:55:53.364 - debug: shuttercontrol.0 (179737) #0 wait for shutter check end
2023-04-12 14:55:53.365 - debug: shuttercontrol.0 (179737) Buero Old value = 100. New value = 100. automatic is active
2023-04-12 14:57:58.575 - debug: shuttercontrol.0 (179737) Brightness sensor value: 3967
2023-04-12 14:57:58.629 - debug: shuttercontrol.0 (179737) Lightsensor up Buero already up at: 100% - setting current action: up
2023-04-12 14:58:08.577 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 15:00:00.008 - debug: shuttercontrol.0 (179737) calculate astrodata ...
2023-04-12 15:00:00.008 - debug: shuttercontrol.0 (179737) Sun Azimut: 212.7°
2023-04-12 15:00:00.009 - debug: shuttercontrol.0 (179737) Sun Elevation: 42.5°
2023-04-12 15:00:02.020 - debug: shuttercontrol.0 (179737) Buero: Check basis for sunprotect. Height:100 > HeightDownSun: 30 AND Height:100 == currentHeight:100 AND currentHeight:100 == heightUp:100
2023-04-12 15:00:02.020 - info: shuttercontrol.0 (179737) Sunprotect #416 Set ID: Buero value: 30%
2023-04-12 15:00:02.065 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]
2023-04-12 15:00:02.066 - debug: shuttercontrol.0 (179737) #0 wait for shutter check started
2023-04-12 15:00:02.121 - debug: shuttercontrol.0 (179737) Sunprotect for Buero is active
2023-04-12 15:00:02.121 - debug: shuttercontrol.0 (179737) RangeMinus: 210 < 212.7RangePlus: 320 > 212.7
2023-04-12 15:00:02.121 - debug: shuttercontrol.0 (179737) last automatic Action for Buero: down_Sunprotect
2023-04-12 15:00:02.121 - debug: shuttercontrol.0 (179737) Sunprotect Buero old height: 100% new height: 30%
2023-04-12 15:00:09.576 - debug: shuttercontrol.0 (179737) Brightness sensor value: 3856
2023-04-12 15:00:09.606 - debug: shuttercontrol.0 (179737) outsidetemperature changed: hm-rpc.1.00181D89B4E7B4.1.ACTUAL_TEMPERATURE Value: 10.6
2023-04-12 15:00:09.672 - debug: shuttercontrol.0 (179737) Lightsensor up Buero already up at: 100% - setting current action: sunProtect
2023-04-12 15:00:19.577 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 15:00:22.067 - debug: shuttercontrol.0 (179737) #0 wait for shutter check end
2023-04-12 15:00:22.068 - debug: shuttercontrol.0 (179737) Shutter state changed: Buero old value = 100 new value = 30
2023-04-12 15:00:22.069 - debug: shuttercontrol.0 (179737) Buero Old value = 100. New value = 30. automatic is active
2023-04-12 15:03:10.046 - debug: shuttercontrol.0 (179737) Brightness sensor value: 4257
2023-04-12 15:03:10.068 - debug: shuttercontrol.0 (179737) outsidetemperature changed: hm-rpc.1.00181D89B4E7B4.1.ACTUAL_TEMPERATURE Value: 10.5
2023-04-12 15:03:10.130 - debug: shuttercontrol.0 (179737) Lightsensor up Buero already up at: 100% - setting current action: sunProtect
2023-04-12 15:03:20.047 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 15:05:00.008 - debug: shuttercontrol.0 (179737) calculate astrodata ...
2023-04-12 15:05:00.009 - debug: shuttercontrol.0 (179737) Sun Azimut: 214.3°
2023-04-12 15:05:00.009 - debug: shuttercontrol.0 (179737) Sun Elevation: 42.1°
2023-04-12 15:05:56.040 - debug: shuttercontrol.0 (179737) Brightness sensor value: 4471
2023-04-12 15:05:56.083 - debug: shuttercontrol.0 (179737) Lightsensor up Buero already up at: 100% - setting current action: sunProtect
2023-04-12 15:06:06.041 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 15:08:27.812 - debug: shuttercontrol.0 (179737) Brightness sensor value: 4399
2023-04-12 15:08:27.839 - debug: shuttercontrol.0 (179737) outsidetemperature changed: hm-rpc.1.00181D89B4E7B4.1.ACTUAL_TEMPERATURE Value: 10.6
2023-04-12 15:08:27.898 - debug: shuttercontrol.0 (179737) Lightsensor up Buero already up at: 100% - setting current action: sunProtect
2023-04-12 15:08:37.813 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 15:10:00.014 - debug: shuttercontrol.0 (179737) calculate astrodata ...
2023-04-12 15:10:00.014 - debug: shuttercontrol.0 (179737) Sun Azimut: 215.8°
2023-04-12 15:10:00.015 - debug: shuttercontrol.0 (179737) Sun Elevation: 41.6°
2023-04-12 15:10:45.049 - debug: shuttercontrol.0 (179737) Brightness sensor value: 4524
2023-04-12 15:10:45.135 - debug: shuttercontrol.0 (179737) Lightsensor up Buero already up at: 100% - setting current action: sunProtect
2023-04-12 15:10:55.050 - debug: shuttercontrol.0 (179737) Brightness State Down is: false
2023-04-12 15:12:47.794 - debug: shuttercontrol.0 (179737) Brightness sensor value: 4369
2023-04-12 15:12:47.834 - debug: shuttercontrol.0 (179737) Lightsensor up Buero already up at: 100% - setting current action: sunProtect
2023-04-12 15:12:57.795 - debug: shuttercontrol.0 (179737) Brightness State Down is: false

Danke für Deine Hilfe...

[simatec]

@stealthangel Deine Überprüfung der Rollläden nach 20 Sekunden löst hier die Aktion aus.
Entweder deine Rollläden liefern einen sauberen State, dann schalte die Überprüfung aus oder setze der Wert höher.
Z.B. auf 60 oder 100 Sekunden

[StealthAngel]

@simatec said in Einstellungen von Shuttercontrol:

@stealthangel Deine Überprüfung der Rollläden nach 20 Sekunden löst hier die Aktion aus.
Entweder deine Rollläden liefern einen sauberen State, dann schalte die Überprüfung aus oder setze der Wert höher.
Z.B. auf 60 oder 100 Sekunden

Hallo, die Überprüfung ist auf 60 Sekunden eingestellt

Jetzt war ich zwar nicht zuhause, aber als ich nach Hause kam war der Rollladen hochgefahren (und nicht auf 30%).

2023-04-13 14:50:00.007 - debug: shuttercontrol.0 (184934) calculate astrodata ...
2023-04-13 14:50:00.008 - debug: shuttercontrol.0 (184934) Sun Azimut: 209.7°
2023-04-13 14:50:00.008 - debug: shuttercontrol.0 (184934) Sun Elevation: 43.6°
2023-04-13 14:50:04.184 - debug: shuttercontrol.0 (184934) Brightness sensor value: 7487
2023-04-13 14:50:04.208 - debug: shuttercontrol.0 (184934) outsidetemperature changed: hm-rpc.1.00181D89B4E7B4.1.ACTUAL_TEMPERATURE Value: 12
2023-04-13 14:50:04.274 - debug: shuttercontrol.0 (184934) Lightsensor up Buero already up at: 100% - setting current action: up
2023-04-13 14:50:14.184 - debug: shuttercontrol.0 (184934) Brightness State Down is: false
2023-04-13 14:52:53.676 - debug: shuttercontrol.0 (184934) Brightness sensor value: 7333
2023-04-13 14:52:53.718 - debug: shuttercontrol.0 (184934) Lightsensor up Buero already up at: 100% - setting current action: up
2023-04-13 14:53:03.677 - debug: shuttercontrol.0 (184934) Brightness State Down is: false
2023-04-13 14:55:00.009 - debug: shuttercontrol.0 (184934) calculate astrodata ...
2023-04-13 14:55:00.009 - debug: shuttercontrol.0 (184934) Sun Azimut: 211.4°
2023-04-13 14:55:00.010 - debug: shuttercontrol.0 (184934) Sun Elevation: 43.2°
2023-04-13 14:55:02.023 - debug: shuttercontrol.0 (184934) Buero: Check basis for sunprotect. Height:100 > HeightDownSun: 30 AND Height:100 == currentHeight:100 AND currentHeight:100 == heightUp:100
2023-04-13 14:55:02.024 - info: shuttercontrol.0 (184934) Sunprotect #416 Set ID: Buero value: 30%
2023-04-13 14:55:02.075 - debug: shuttercontrol.0 (184934) #0 wait for shutter check started
2023-04-13 14:55:02.073 - info: mqtt.0 (955) send2Server mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos[shellies/Buero/Rolladen/roller/0/command/pos]
2023-04-13 14:55:02.126 - debug: shuttercontrol.0 (184934) Sunprotect for Buero is active
2023-04-13 14:55:02.127 - debug: shuttercontrol.0 (184934) RangeMinus: 210 < 211.4RangePlus: 320 > 211.4
2023-04-13 14:55:02.127 - debug: shuttercontrol.0 (184934) last automatic Action for Buero: down_Sunprotect
2023-04-13 14:55:02.127 - debug: shuttercontrol.0 (184934) Sunprotect Buero old height: 100% new height: 30%
2023-04-13 14:55:28.929 - debug: shuttercontrol.0 (184934) Brightness sensor value: 7345
2023-04-13 14:55:28.952 - debug: shuttercontrol.0 (184934) outsidetemperature changed: hm-rpc.1.00181D89B4E7B4.1.ACTUAL_TEMPERATURE Value: 12.1
2023-04-13 14:55:29.030 - debug: shuttercontrol.0 (184934) Lightsensor up Buero already up at: 100% - setting current action: sunProtect
2023-04-13 14:55:38.930 - debug: shuttercontrol.0 (184934) Brightness State Down is: false
2023-04-13 14:56:02.076 - debug: shuttercontrol.0 (184934) #0 wait for shutter check end
2023-04-13 14:56:02.078 - debug: shuttercontrol.0 (184934) Shutter state changed: Buero old value = 100 new value = 30
2023-04-13 14:56:02.078 - debug: shuttercontrol.0 (184934) Buero Old value = 100. New value = 30. automatic is active
2023-04-13 14:57:49.676 - debug: shuttercontrol.0 (184934) Brightness sensor value: 7125
2023-04-13 14:57:49.724 - debug: shuttercontrol.0 (184934) Lightsensor up Buero already up at: 100% - setting current action: sunProtect
2023-04-13 14:57:59.677 - debug: shuttercontrol.0 (184934) Brightness State Down is: false
2023-04-13 14:59:55.972 - debug: shuttercontrol.0 (184934) Brightness sensor value: 6848
2023-04-13 14:59:56.003 - debug: shuttercontrol.0 (184934) outsidetemperature changed: hm-rpc.1.00181D89B4E7B4.1.ACTUAL_TEMPERATURE Value: 12.2
2023-04-13 14:59:56.029 - debug: shuttercontrol.0 (184934) Lightsensor up Buero already up at: 100% - setting current action: sunProtect

Die Objects sind der Meinung, dass der Rollladen auf 30% steht

In Wirklichkeit ist der Rollladen aber auf 100%

Also ist er scheinbar runter und gleich wieder hochgefahren.
Kast Du bitte nochmal schauen, was hier schief gegangen ist?.....

[StealthAngel]

@simatec

Halt Stop, ich habe noch einen Fehler bei mir gefunden. Wenn ich die "Objekt-ID Rollladen" einstelle wird vermutlich die Sollposition dort hin gesendet und die Position davon auch abgefragt, oder?

Bei meinen Shellys muss ich aber auf

mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos

schreiben und von

mqtt.0.shellies.Buero.Rolladen.roller.0.pos

lesen. Ich hatte als Object-ID "mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos". Das könnte der Fehler sein. Ich arbeite jetzt mit einen Alias.

    "alias": {
      "id": {
        "read": "mqtt.0.shellies.Buero.Rolladen.roller.0.pos",
        "write": "mqtt.0.shellies.Buero.Rolladen.roller.0.command.pos"
      }
    },

Ich hoffe, dass es jetzt morgen funktioniert.

Erstmal Sorry und vielen Dank....

[simatec]

@stealthangel Laut dem Log hat Shuttercontrol mit dem Überprüfen nach 60 Sekunden alles richtig gemacht.
Automatik wurde erkannt und er wurde in den Sonnenschutz gefahren.

Ich gehe mal davon aus, dass da bei deinen States der Rollläden was krum ist.
Hast du da noch irgendwelche Scripte laufen?

Wann wurde denn der State des Rollladens geändert?

[simatec]

@stealthangel Warum nutzt du nicht den Shelly Adapter??? Würde sicher einiges erleichtern

[StealthAngel]

@simatec said in Einstellungen von Shuttercontrol:

@stealthangel Warum nutzt du nicht den Shelly Adapter??? Würde sicher einiges erleichtern

Ich habe jetzt auch auf den Shelly Adapter umgestellt. Das Problem ist aber immer noch das Gleiche :(

Der Rollladen ist wieder 3 mal runter und rauf gefahren. So langsam verzweifele ich ....

2023-04-17 14:45:00.014 - debug: shuttercontrol.0 (207218) calculate astrodata ...
2023-04-17 14:45:00.014 - debug: shuttercontrol.0 (207218) Sun Azimut: 209°
2023-04-17 14:45:00.015 - debug: shuttercontrol.0 (207218) Sun Elevation: 45.3°
2023-04-17 14:46:12.976 - debug: shuttercontrol.0 (207218) Brightness sensor value: 5032
2023-04-17 14:46:14.052 - debug: shuttercontrol.0 (207218) Lightsensor up BueroRollladen already up at: 100% - setting current action: up
2023-04-17 14:46:22.978 - debug: shuttercontrol.0 (207218) Brightness State Down is: false
2023-04-17 14:48:53.703 - debug: shuttercontrol.0 (207218) Brightness sensor value: 4799
2023-04-17 14:48:54.799 - debug: shuttercontrol.0 (207218) Lightsensor up BueroRollladen already up at: 100% - setting current action: up
2023-04-17 14:49:03.703 - debug: shuttercontrol.0 (207218) Brightness State Down is: false
2023-04-17 14:50:00.019 - debug: shuttercontrol.0 (207218) calculate astrodata ...
2023-04-17 14:50:00.020 - debug: shuttercontrol.0 (207218) Sun Azimut: 210.7°
2023-04-17 14:50:00.021 - debug: shuttercontrol.0 (207218) Sun Elevation: 44.9°
2023-04-17 14:50:02.035 - debug: shuttercontrol.0 (207218) BueroRollladen: Check basis for sunprotect. Height:100 > HeightDownSun: 30 AND Height:100 == currentHeight:100 AND currentHeight:100 == heightUp:100
2023-04-17 14:50:02.036 - info: shuttercontrol.0 (207218) Sunprotect #416 Set ID: BueroRollladen value: 30%
2023-04-17 14:50:02.048 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:50:02.059 - debug: shuttercontrol.0 (207218) Sunprotect for BueroRollladen is active
2023-04-17 14:50:02.060 - debug: shuttercontrol.0 (207218) RangeMinus: 210 < 210.7RangePlus: 320 > 210.7
2023-04-17 14:50:02.060 - debug: shuttercontrol.0 (207218) last automatic Action for BueroRollladen: down_Sunprotect
2023-04-17 14:50:02.060 - debug: shuttercontrol.0 (207218) Sunprotect BueroRollladen old height: % new height: 30%
2023-04-17 14:50:02.083 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:50:14.335 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:51:02.049 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:51:02.051 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = new value = 30
2023-04-17 14:51:02.051 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 14:51:02.052 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 14:51:02.052 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 14:51:02.052 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 14:51:02.053 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 14:51:02.053 - debug: shuttercontrol.0 (207218) #1 oldHeight: %
2023-04-17 14:51:02.053 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 14:51:02.053 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 14:51:02.084 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:51:02.085 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = new value = 30
2023-04-17 14:51:02.086 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 14:51:02.087 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 14:51:02.087 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 14:51:02.087 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 14:51:02.088 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 14:51:02.088 - debug: shuttercontrol.0 (207218) #1 oldHeight: %
2023-04-17 14:51:02.089 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 14:51:02.089 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 14:51:02.091 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = . New value = 30
2023-04-17 14:51:02.092 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 14:51:02.142 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = . New value = 30
2023-04-17 14:51:02.143 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 14:51:14.336 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:51:14.338 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = new value = 30
2023-04-17 14:51:14.338 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 14:51:14.339 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 14:51:14.339 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 14:51:14.339 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 14:51:14.339 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 14:51:14.340 - debug: shuttercontrol.0 (207218) #1 oldHeight: %
2023-04-17 14:51:14.340 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 14:51:14.340 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 14:51:14.390 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = . New value = 30
2023-04-17 14:51:14.391 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 14:51:19.961 - debug: shuttercontrol.0 (207218) Brightness sensor value: 4622
2023-04-17 14:51:19.995 - info: shuttercontrol.0 (207218) Lightsensor #5 Set ID: BueroRollladen value: 100%
2023-04-17 14:51:20.003 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:51:20.013 - debug: shuttercontrol.0 (207218) last automatic Action for BueroRollladen: up_Brightness
2023-04-17 14:51:20.013 - debug: shuttercontrol.0 (207218) save current height: 100% from BueroRollladen
2023-04-17 14:51:20.035 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:51:29.963 - debug: shuttercontrol.0 (207218) Brightness State Down is: false
2023-04-17 14:51:33.042 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:52:20.004 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:52:20.005 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = new value = 100
2023-04-17 14:52:20.006 - debug: shuttercontrol.0 (207218) BueroRollladen Old value = . New value = 100. automatic is active
2023-04-17 14:52:20.035 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:52:20.037 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = new value = 100
2023-04-17 14:52:20.038 - debug: shuttercontrol.0 (207218) BueroRollladen Old value = . New value = 100. automatic is active
2023-04-17 14:52:33.043 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:52:33.044 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = new value = 100
2023-04-17 14:52:33.045 - debug: shuttercontrol.0 (207218) BueroRollladen Old value = . New value = 100. automatic is active
2023-04-17 14:53:31.713 - debug: shuttercontrol.0 (207218) Brightness sensor value: 4502
2023-04-17 14:53:31.770 - debug: shuttercontrol.0 (207218) Lightsensor up BueroRollladen already up at: 100% - setting current action: up
2023-04-17 14:53:41.714 - debug: shuttercontrol.0 (207218) Brightness State Down is: false
2023-04-17 14:55:00.017 - debug: shuttercontrol.0 (207218) calculate astrodata ...
2023-04-17 14:55:00.018 - debug: shuttercontrol.0 (207218) Sun Azimut: 212.3°
2023-04-17 14:55:00.018 - debug: shuttercontrol.0 (207218) Sun Elevation: 44.5°
2023-04-17 14:55:02.040 - debug: shuttercontrol.0 (207218) BueroRollladen: Check basis for sunprotect. Height:100 > HeightDownSun: 30 AND Height:100 == currentHeight:100 AND currentHeight:100 == heightUp:100
2023-04-17 14:55:02.041 - info: shuttercontrol.0 (207218) Sunprotect #416 Set ID: BueroRollladen value: 30%
2023-04-17 14:55:02.093 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:55:02.111 - debug: shuttercontrol.0 (207218) Sunprotect for BueroRollladen is active
2023-04-17 14:55:02.112 - debug: shuttercontrol.0 (207218) RangeMinus: 210 < 212.3RangePlus: 320 > 212.3
2023-04-17 14:55:02.113 - debug: shuttercontrol.0 (207218) last automatic Action for BueroRollladen: down_Sunprotect
2023-04-17 14:55:02.113 - debug: shuttercontrol.0 (207218) Sunprotect BueroRollladen old height: 100% new height: 30%
2023-04-17 14:55:02.136 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:55:14.373 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:56:02.095 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:56:02.097 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = 100 new value = 30
2023-04-17 14:56:02.098 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 14:56:02.099 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 14:56:02.099 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 14:56:02.100 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 14:56:02.100 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 14:56:02.101 - debug: shuttercontrol.0 (207218) #1 oldHeight: 100 %
2023-04-17 14:56:02.101 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 14:56:02.101 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 14:56:02.137 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:56:02.143 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = 100 new value = 30
2023-04-17 14:56:02.144 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 14:56:02.144 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 14:56:02.145 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 14:56:02.146 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 14:56:02.146 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 14:56:02.147 - debug: shuttercontrol.0 (207218) #1 oldHeight: 100 %
2023-04-17 14:56:02.147 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 14:56:02.148 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 14:56:02.152 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = 100. New value = 30
2023-04-17 14:56:02.153 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 14:56:02.208 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = 100. New value = 30
2023-04-17 14:56:02.209 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 14:56:14.374 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:56:14.377 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = 100 new value = 30
2023-04-17 14:56:14.377 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 14:56:14.378 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 14:56:14.378 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 14:56:14.378 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 14:56:14.378 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 14:56:14.379 - debug: shuttercontrol.0 (207218) #1 oldHeight: 100 %
2023-04-17 14:56:14.379 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 14:56:14.379 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 14:56:14.432 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = 100. New value = 30
2023-04-17 14:56:14.432 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 14:56:32.952 - debug: shuttercontrol.0 (207218) Brightness sensor value: 4650
2023-04-17 14:56:32.992 - info: shuttercontrol.0 (207218) Lightsensor #5 Set ID: BueroRollladen value: 100%
2023-04-17 14:56:33.000 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:56:33.010 - debug: shuttercontrol.0 (207218) last automatic Action for BueroRollladen: up_Brightness
2023-04-17 14:56:33.011 - debug: shuttercontrol.0 (207218) save current height: 100% from BueroRollladen
2023-04-17 14:56:33.032 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:56:42.953 - debug: shuttercontrol.0 (207218) Brightness State Down is: false
2023-04-17 14:56:46.052 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 14:57:26.778 - info: admin.0 (831) ==> Connected system.user.admin from ::ffff:192.168.2.21
2023-04-17 14:57:33.002 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:57:33.003 - debug: shuttercontrol.0 (207218) BueroRollladen Old value = 100. New value = 100. automatic is active
2023-04-17 14:57:33.032 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:57:33.034 - debug: shuttercontrol.0 (207218) BueroRollladen Old value = 100. New value = 100. automatic is active
2023-04-17 14:57:38.475 - info: admin.0 (831) ==> Connected system.user.admin from ::ffff:192.168.2.21
2023-04-17 14:57:46.054 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 14:57:46.055 - debug: shuttercontrol.0 (207218) BueroRollladen Old value = 100. New value = 100. automatic is active
2023-04-17 14:59:19.969 - debug: shuttercontrol.0 (207218) Brightness sensor value: 4804
2023-04-17 14:59:20.020 - debug: shuttercontrol.0 (207218) Lightsensor up BueroRollladen already up at: 100% - setting current action: up
2023-04-17 14:59:29.971 - debug: shuttercontrol.0 (207218) Brightness State Down is: false
2023-04-17 15:00:00.012 - debug: shuttercontrol.0 (207218) calculate astrodata ...
2023-04-17 15:00:00.013 - debug: shuttercontrol.0 (207218) Sun Azimut: 213.9°
2023-04-17 15:00:00.013 - debug: shuttercontrol.0 (207218) Sun Elevation: 44.1°
2023-04-17 15:00:02.026 - debug: shuttercontrol.0 (207218) BueroRollladen: Check basis for sunprotect. Height:100 > HeightDownSun: 30 AND Height:100 == currentHeight:100 AND currentHeight:100 == heightUp:100
2023-04-17 15:00:02.026 - info: shuttercontrol.0 (207218) Sunprotect #416 Set ID: BueroRollladen value: 30%
2023-04-17 15:00:02.075 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 15:00:02.086 - debug: shuttercontrol.0 (207218) Sunprotect for BueroRollladen is active
2023-04-17 15:00:02.086 - debug: shuttercontrol.0 (207218) RangeMinus: 210 < 213.9RangePlus: 320 > 213.9
2023-04-17 15:00:02.086 - debug: shuttercontrol.0 (207218) last automatic Action for BueroRollladen: down_Sunprotect
2023-04-17 15:00:02.087 - debug: shuttercontrol.0 (207218) Sunprotect BueroRollladen old height: 100% new height: 30%
2023-04-17 15:00:02.105 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 15:00:14.359 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 15:01:02.077 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 15:01:02.078 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = 100 new value = 30
2023-04-17 15:01:02.079 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 15:01:02.079 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 15:01:02.080 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 15:01:02.080 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 15:01:02.080 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 15:01:02.080 - debug: shuttercontrol.0 (207218) #1 oldHeight: 100 %
2023-04-17 15:01:02.081 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 15:01:02.081 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 15:01:02.106 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 15:01:02.128 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = 100 new value = 30
2023-04-17 15:01:02.128 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 15:01:02.129 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 15:01:02.130 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 15:01:02.130 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 15:01:02.132 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 15:01:02.132 - debug: shuttercontrol.0 (207218) #1 oldHeight: 100 %
2023-04-17 15:01:02.132 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 15:01:02.133 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 15:01:02.140 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = 100. New value = 30
2023-04-17 15:01:02.140 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 15:01:02.188 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = 100. New value = 30
2023-04-17 15:01:02.188 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 15:01:14.360 - debug: shuttercontrol.0 (207218) #0 wait for shutter check end
2023-04-17 15:01:14.361 - debug: shuttercontrol.0 (207218) Shutter state changed: BueroRollladen old value = 100 new value = 30
2023-04-17 15:01:14.362 - debug: shuttercontrol.0 (207218) #1 shutterName: BueroRollladen
2023-04-17 15:01:14.362 - debug: shuttercontrol.0 (207218) #1 shutterState: 30 %
2023-04-17 15:01:14.362 - debug: shuttercontrol.0 (207218) #1 currentAction: Manu_Mode
2023-04-17 15:01:14.363 - debug: shuttercontrol.0 (207218) #1 triggerAction: Manu_Mode
2023-04-17 15:01:14.363 - debug: shuttercontrol.0 (207218) #1 currentHeight: 30 %
2023-04-17 15:01:14.363 - debug: shuttercontrol.0 (207218) #1 oldHeight: 100 %
2023-04-17 15:01:14.363 - debug: shuttercontrol.0 (207218) #1 currentShutterState: activated
2023-04-17 15:01:14.364 - debug: shuttercontrol.0 (207218) #1 currentShutterStateTime: 60 seconds
2023-04-17 15:01:14.415 - debug: shuttercontrol.0 (207218) BueroRollladen drived manually to 30. Old value = 100. New value = 30
2023-04-17 15:01:14.415 - debug: shuttercontrol.0 (207218) BueroRollladen Updated trigger action to Manu_Mode to prevent moving after window close
2023-04-17 15:01:52.457 - debug: shuttercontrol.0 (207218) Brightness sensor value: 4873
2023-04-17 15:01:52.494 - info: shuttercontrol.0 (207218) Lightsensor #5 Set ID: BueroRollladen value: 100%
2023-04-17 15:01:52.506 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 15:01:52.520 - debug: shuttercontrol.0 (207218) last automatic Action for BueroRollladen: up_Brightness
2023-04-17 15:01:52.520 - debug: shuttercontrol.0 (207218) save current height: 100% from BueroRollladen
2023-04-17 15:01:52.537 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started
2023-04-17 15:02:02.459 - debug: shuttercontrol.0 (207218) Brightness State Down is: false
2023-04-17 15:02:05.565 - debug: shuttercontrol.0 (207218) #0 wait for shutter check started

Also irgendwas läuft noch falsch.
Mich wundert, dass sich der Status ändert. Ist das so richtig?

Screenshot ist von einem etwas späteren Zeitpunkt, war aber sonst auch so, allerdings nicht geloggt....

Jetzt wo ich hier schreibe, fährt der Rollladen munter weiter rauf und runter.
Es ist mit dem Shelly-Adapter also massiv schlechter geworden :(

[simatec]

@stealthangel Bitte teste die aktuelle v1.4.28

[StealthAngel]

@simatec said in Einstellungen von Shuttercontrol:

@stealthangel Bitte teste die aktuelle v1.4.28

Funktioniert auch nicht richtig :(

Das einzige was sich jetzt geändert hat ist, dass der Rollladen nicht mehr komplett rauf und runter fährt, sondern nur ca. 5% und das jetzt fast im Sekunden Takt.

Am besten sieht man das an der Shelly Shutter.Position Objekt:

Hier auch noch das Debug:

2023-04-18 15:34:50.700 - debug: shuttercontrol.0 (208390) Brightness sensor value: 8371
2023-04-18 15:34:50.742 - debug: shuttercontrol.0 (208390) Lightsensor up BueroRollladen already up at: 100% - setting current action: up
2023-04-18 15:35:00.016 - debug: shuttercontrol.0 (208390) calculate astrodata ...
2023-04-18 15:35:00.017 - debug: shuttercontrol.0 (208390) Sun Azimut: 224.9°
2023-04-18 15:35:00.018 - debug: shuttercontrol.0 (208390) Sun Elevation: 41°
2023-04-18 15:35:00.700 - debug: shuttercontrol.0 (208390) Brightness State Down is: false
2023-04-18 15:35:02.073 - debug: shuttercontrol.0 (208390) BueroRollladen: Check basis for sunprotect. Height:100 > HeightDownSun: 30 AND Height:100 == currentHeight:100 AND currentHeight:100 == heightUp:100
2023-04-18 15:35:02.074 - info: shuttercontrol.0 (208390) Sunprotect #416 Set ID: BueroRollladen value: 30%
2023-04-18 15:35:02.122 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:35:02.141 - debug: shuttercontrol.0 (208390) Sunprotect for BueroRollladen is active
2023-04-18 15:35:02.142 - debug: shuttercontrol.0 (208390) RangeMinus: 210 < 224.9RangePlus: 320 > 224.9
2023-04-18 15:35:02.144 - debug: shuttercontrol.0 (208390) last automatic Action for BueroRollladen: down_Sunprotect
2023-04-18 15:35:02.144 - debug: shuttercontrol.0 (208390) Sunprotect BueroRollladen old height: 100% new height: 30%
2023-04-18 15:35:02.166 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:35:03.157 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:35:05.773 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:36:02.124 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:36:02.167 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:36:03.158 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:36:05.775 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:37:08.708 - debug: shuttercontrol.0 (208390) Brightness sensor value: 8611
2023-04-18 15:37:08.784 - info: shuttercontrol.0 (208390) Lightsensor #5 Set ID: BueroRollladen value: 30%
2023-04-18 15:37:08.793 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:37:08.806 - debug: shuttercontrol.0 (208390) last automatic Action for BueroRollladen: up_Brightness
2023-04-18 15:37:08.807 - debug: shuttercontrol.0 (208390) save current height: 30% from BueroRollladen
2023-04-18 15:37:08.824 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:37:09.861 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:37:10.839 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:37:11.852 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:37:12.863 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:37:13.883 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:37:16.495 - debug: shuttercontrol.0 (208390) #0 wait for shutter check started
2023-04-18 15:37:18.709 - debug: shuttercontrol.0 (208390) Brightness State Down is: false
2023-04-18 15:38:08.794 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:38:08.825 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:38:09.860 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:38:10.840 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:38:11.853 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:38:12.863 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:38:13.884 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:38:16.496 - debug: shuttercontrol.0 (208390) #0 wait for shutter check end
2023-04-18 15:39:12.143 - debug: shuttercontrol.0 (208390) Brightness sensor value: 8592
2023-04-18 15:39:22.144 - debug: shuttercontrol.0 (208390) Brightness State Down is: false
2023-04-18 15:40:00.010 - debug: shuttercontrol.0 (208390) calculate astrodata ...
2023-04-18 15:40:00.010 - debug: shuttercontrol.0 (208390) Sun Azimut: 226.4°
2023-04-18 15:40:00.011 - debug: shuttercontrol.0 (208390) Sun Elevation: 40.4°
2023-04-18 15:42:05.421 - debug: shuttercontrol.0 (208390) Brightness sensor value: 8634
2023-04-18 15:42:15.421 - debug: shuttercontrol.0 (208390) Brightness State Down is: false
2023-04-18 15:44:44.194 - debug: shuttercontrol.0 (208390) Brightness sensor value: 8423
2023-04-18 15:44:54.195 - debug: shuttercontrol.0 (208390) Brightness State Down is: false
2023-04-18 15:45:00.011 - debug: shuttercontrol.0 (208390) calculate astrodata ...
2023-04-18 15:45:00.011 - debug: shuttercontrol.0 (208390) Sun Azimut: 227.8°
2023-04-18 15:45:00.012 - debug: shuttercontrol.0 (208390) Sun Elevation: 39.8°

Auch die Position in den Objekten passt nicht.
shutters.autoLevel.BueroRollladen steht auf 30%
Shelly.Shutter.Position sagt aber 100% (und das ist auch richtig)

[StealthAngel]

@simatec Wenn Du mir mit einigen Worten erklärst wie das Ganze funktionieren soll, würde ich mich bereit erklären und etwas in den Source-Code abzutauchen und Debug-Hilfe zugeben....

[Homoran]

@stealthangel sagte in Einstellungen von Shuttercontrol:

Am besten sieht man das an der Shelly Shutter.Position Objekt:

das sieht für mich aus als ob der Shelly die Position unsauber durchgibt (flattert)
im Millisekundenbereich von 92 auf 98 u.ä.

[simatec]

@stealthangel Poste mal deine Config hier als JSON.
Da ist bei dir völlig was krumm… Shuttercontrol gibt nur einen Fahrbefehl an deinen Rollladen.
Schalte alle Scripte und sonstige Routinen ab

[StealthAngel]

@simatec said in Einstellungen von Shuttercontrol:

@stealthangel Poste mal deine Config hier als JSON.

Hier ist die Config: system.adapter.shuttercontrol.0 (2).json

Da ist bei dir völlig was krumm… Shuttercontrol gibt nur einen Fahrbefehl an deinen Rollladen.
Schalte alle Scripte und sonstige Routinen ab

Es gibt keine anderen Skripte oder Routinen

Das Flattern habe ich auch nur mit dem Shelly-Adapter gesehen. Als ich das noch über MQTT gemacht habe war der Positionswert sauber, aber der Shuttercontrol hat trotzdem nicht richtig funktioniert...

[StealthAngel]

@simatec

Noch zwei Fragen:

1.) Wenn ich in den Objekten "autoSun" auf "false" stelle während der Sonnenschutz aktiv ist, müsste dann sunProtect nicht beendet werden und die Rollläden wieder hoch fahren?

2.) Wenn der Rollladen bei "autoDown" runter fährt und das Fenster offen ist würde ich erwarten das der Rollladen nur bis auf den Wert runter fährt der bei "Rollladenhöhe bei öffnen des Fensters oder Tür" definiert ist. Bei mir fährt der Rollladen jedoch komplett runter und erst wenn ich das Fenster zu und wieder auf mache, wird die "richtige" Rollladenhöhe gefahren.

Oder verstehe ich da irgendwas falsch?

[simatec]

@stealthangel

1. Nein ist nicht so angedacht ...
2. Aussperrschutz falsch konfiguriert