NEWS
ioBroker Backup wieder einspielen
Installation
85
Beiträge
4
Kommentatoren
7.9k
Aufrufe
3
Watching
-
@thomas-braun said in ioBroker Backup wieder einspielen:
iob diag
======== Start marking the full check here =========
Skript v.2023-04-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.2 Architecture : armv7l Docker : false Virtualization : none Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 20:09:09 up 41 days, 10:29, 2 users, load average: 12.11, 9.94, 6.40 CPU threads: 4 *** Time and Time Zones *** Local time: Mon 2023-04-03 20:09:23 CEST Universal time: Mon 2023-04-03 18:09:23 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.0G 84M 171M 1.7G 1.8G Swap: 99M 55M 44M Total: 3.9G 2.1G 128M 3838 M total memory 2019 M used memory 487 M active memory 3075 M inactive memory 84 M free memory 196 M buffer memory 1537 M swap cache 99 M total swap 55 M used swap 44 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 8.5G 20G 31% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 16K 1.9G 1% /dev/shm tmpfs tmpfs 1.9G 209M 1.7G 11% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/mmcblk0p1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Feb 21 08:39:20 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:B7:67:4E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Tue Feb 21 08:39:21 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Tue Feb 21 08:39:21 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Tue Feb 21 08:39:22 2023] EXT4-fs (mmcblk0p2): recovery complete [Tue Feb 21 08:39:22 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Tue Feb 21 08:39:22 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Feb 21 08:39:24 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 576M /var/ 213M /var/cache 200M /var/cache/apt 142M /var/log 141M /var/cache/apt/archives /opt/iobroker/backups: 103M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 435M /opt/iobroker/iobroker-data/ 311M /opt/iobroker/iobroker-data/files 85M /opt/iobroker/iobroker-data/backup-objects 72M /opt/iobroker/iobroker-data/files/telegram.admin 51M /opt/iobroker/iobroker-data/files/javascript.admin The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.map 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map 9.1M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.1-deb-1nodesource1 Candidate: 16.19.1-deb-1nodesource1 Version table: *** 16.19.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u3 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 894 Some problems detected, please run iob fix *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.backitup.0 : backitup : raspberrypi - disabled system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled system.adapter.chromecast.0 : chromecast : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.echarts.0 : echarts : raspberrypi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - disabled system.adapter.feiertage.0 : feiertage : raspberrypi - enabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled system.adapter.harmony.0 : harmony : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled + system.adapter.info.0 : info : raspberrypi - enabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled + system.adapter.panasonic-comfort-cloud.0: panasonic-comfort-cloud: raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled + system.adapter.sayit.0 : sayit : raspberrypi - enabled, port: 0 + system.adapter.sayit.1 : sayit : raspberrypi - enabled, port: 0 + system.adapter.sayit.2 : sayit : raspberrypi - enabled, port: 0 + system.adapter.sayit.3 : sayit : raspberrypi - enabled, port: 0 + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 system.adapter.tado.0 : tado : raspberrypi - enabled system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.1 : text2command : raspberrypi - enabled system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.worx.0 : worx : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0014D8F906-if00 + instance is alive Enabled adapters with bindings system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.sayit.0 : sayit : raspberrypi - enabled, port: 0 + system.adapter.sayit.1 : sayit : raspberrypi - enabled, port: 0 + system.adapter.sayit.2 : sayit : raspberrypi - enabled, port: 0 + system.adapter.sayit.3 : sayit : raspberrypi - enabled, port: 0 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0014D8F906-if00 ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) Installed ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hmip" : 1.20.0 , installed 1.20.0 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "iot" : 1.14.2 , installed 1.14.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "netatmo" : 2.0.5 , installed 2.0.5 Adapter "panasonic-comfort-cloud": 2.1.0, installed 2.1.0 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "sayit" : 1.12.3 , installed 1.12.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.3.1 , installed 6.3.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "tado" : 0.4.5 , installed 0.4.5 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tuya" : 3.13.1 , installed 3.13.1 Adapter "vis" : 1.4.16 , installed 1.4.15 [Updatable] Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "weatherunderground": 3.4.2, installed 3.4.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "worx" : 2.0.3 , installed 2.0.3 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 8552 States: 8771 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 https://deb.nodesource.com/node_16.x buster InRelease Hit:3 http://raspbian.raspberrypi.org/raspbian buster InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17659 556/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 364555978 8627/cupsd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 366918206 619/io.sonoff.0 tcp 0 0 0.0.0.0:8765 0.0.0.0:* LISTEN 0 13294 366/python tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 366917975 403/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 366917968 403/iobroker.js-con tcp6 0 0 :::22 :::* LISTEN 0 17661 556/sshd udp 0 0 0.0.0.0:36865 0.0.0.0:* 108 13851 344/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 366918219 634/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 366918220 634/io.tuya.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 366919119 602/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 16570 545/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 364552998 8628/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 13849 344/avahi-daemon: r udp6 0 0 :::5353 :::* 108 13850 344/avahi-daemon: r udp6 0 0 :::54050 :::* 108 13852 344/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-04-03 20:12:04.327 - warn: javascript.0 (471) at Object.<anonymous> (script.js.Zähler.Gas.Umdrehungen_Gas:8:5) 2023-04-03 20:12:04.328 - warn: javascript.0 (471) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1244:38) 2023-04-03 20:12:04.328 - warn: javascript.0 (471) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:593:29) 2023-04-03 20:12:04.328 - warn: javascript.0 (471) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.js:5916:56) 2023-04-03 20:12:04.328 - warn: javascript.0 (471) at processImmediate (node:internal/timers:466:21) 2023-04-03 20:12:04.329 - warn: javascript.0 (471) You are assigning a number to the state "0_userdata.0.Zöhlerstände.Gas.Zählerstand" which expects a string. Please fix your code to use a string or change the state type to number. This warning might become an error in future versions. 2023-04-03 20:12:04.330 - warn: javascript.0 (471) at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1719:20) 2023-04-03 20:12:04.330 - warn: javascript.0 (471) at Object.<anonymous> (script.js.Zähler.Gas.Umdrehungen_Gas:9:5) 2023-04-03 20:12:04.331 - warn: javascript.0 (471) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1244:38) 2023-04-03 20:12:04.331 - warn: javascript.0 (471) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:593:29) 2023-04-03 20:12:04.331 - warn: javascript.0 (471) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.js:5916:56) 2023-04-03 20:12:04.331 - warn: javascript.0 (471) at processImmediate (node:internal/timers:466:21) 2023-04-03 20:12:04.360 - info: javascript.0 (471) State value to set for "0_userdata.0.Zöhlerstände.Gas.Arbeitsvariable" has to be type "string" but received type "number" 2023-04-03 20:12:04.370 - info: javascript.0 (471) State value to set for "0_userdata.0.Zöhlerstände.Gas.Zählerstand" has to be type "string" but received type "number" 2023-04-03 20:12:04.377 - info: javascript.0 (471) State value to set for "0_userdata.0.Zöhlerstände.Gas.Zählerstand" has to be type "string" but received type "number" 2023-04-03 20:12:04.479 - warn: javascript.0 (471) You are assigning a number to the state "0_userdata.0.Zöhlerstände.Gas.Arbeitsvariable" which expects a string. Please fix your code to use a string or change the state type to number. This warning might become an error in future versions. 2023-04-03 20:12:04.490 - warn: javascript.0 (471) at setState (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1719:20) 2023-04-03 20:12:04.490 - warn: javascript.0 (471) at Object.<anonymous> (script.js.Zähler.Gas.Umdrehungen_Gas:5:5) 2023-04-03 20:12:04.491 - warn: javascript.0 (471) at Object.callback (/opt/iobroker/node_modules/iobroker.javascript/lib/sandbox.js:1244:38) 2023-04-03 20:12:04.491 - warn: javascript.0 (471) at Object.stateChange (/opt/iobroker/node_modules/iobroker.javascript/main.js:593:29) 2023-04-03 20:12:04.492 - warn: javascript.0 (471) at Immediate._onImmediate (/opt/iobroker/node_modules/@iobroker/js-controller-adapter/src/lib/adapter/adapter.js:5916:56) 2023-04-03 20:12:04.492 - warn: javascript.0 (471) at processImmediate (node:internal/timers:466:21) 2023-04-03 20:12:04.507 - warn: shelly.0 (602) [authEnabled] 192.168.178.64 (shelly1 / shelly1-E09806963CF8 / SHSW-1#E09806963CF8#1): This device is not protected via restricted login (see adapter documentation for details) 2023-04-03 20:12:04.515 - info: javascript.0 (471) State value to set for "0_userdata.0.Zöhlerstände.Gas.Arbeitsvariable" has to be type "string" but received type "number" 2023-04-03 20:12:04.671 - warn: shelly.0 (602) [authEnabled] 192.168.178.95 (shelly1 / shelly1-483FDAA23470 / SHSW-1#483FDAA23470#1): This device is not protected via restricted login (see adapter documentation for details)============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
führe gleich iob fix aus@federal sagte in ioBroker Backup wieder einspielen:
Temp directories causing npm8 problem: 894
Hast du da mal als root herumgehampelt?
Das sollte deriob fixnämlich eigentlich bereinigen.find "/opt/iobroker/node_modules" -type d -iname ".*-????????" ! -iname ".local-chromium" -exec rm -rf "{}" \;bringt?
-
@glasfaser said in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
so wie ich es verstehe, wurden nur 5 Adapter gestartet.
Du hast doch ein Backup/Restore eingespielt ... und das dauert
Aber :
durch den krasch werden die anderen Adapter nicht mehr nachinstalliert .Wie soll ich weiter vorgehen?
Neues Backup/Restore einspielen .
habe ein Backup eigespielt
System successfully restored! pi@raspberrypi:/opt/iobroker/backups $ iobroker start all The adapter "history.0" was started. The adapter "javascript.0" was started. The adapter "scenes.0" was started. The adapter "telegram.0" was started. The adapter "chromecast.0" was started. The adapter "hmip.0" was started. The adapter "ical.0" was started. The adapter "netatmo.0" was started. The adapter "ping.0" was started. The adapter "shelly.0" was started. The adapter "sonoff.0" was started. The adapter "tuya.0" was started. The adapter "weatherunderground.0" was started. The adapter "zigbee.0" was started. The adapter "broadlink2.0" was started. The adapter "cloud.0" was started. The adapter "discovery.0" was started. The adapter "echarts.0" was started. The adapter "fb-checkpresence.0" was started. The adapter "feiertage.0" was started. The adapter "fullybrowser.0" was started. The adapter "harmony.0" was started. The adapter "info.0" was started. The adapter "iot.0" was started. The adapter "panasonic-comfort-cloud.0" was started. The adapter "sayit.0" was started. The adapter "sayit.1" was started. The adapter "sayit.2" was started. The adapter "sayit.3" was started. The adapter "tado.0" was started. The adapter "tankerkoenig.0" was started. The adapter "text2command.1" was started. The adapter "trashschedule.0" was started. The adapter "vis-inventwo.0" was started. The adapter "vis-timeandweather.0" was started. The adapter "vis.0" was started. The adapter "web.0" was started. The adapter "worx.0" was started. pi@raspberrypi:/opt/iobroker/backups $ iobroker startkann aber nach wie vor nicht auf iob zugreifen
@federal sagte in ioBroker Backup wieder einspielen:
kann aber nach wie vor nicht auf iob zugreifen
@homoran sagte in ioBroker Backup wieder einspielen:
admin als https konfiguriert?
@homoran sagte in ioBroker Backup wieder einspielen:
und deaktiviert
-
@federal sagte in ioBroker Backup wieder einspielen:
Temp directories causing npm8 problem: 894
Hast du da mal als root herumgehampelt?
Das sollte deriob fixnämlich eigentlich bereinigen.find "/opt/iobroker/node_modules" -type d -iname ".*-????????" ! -iname ".local-chromium" -exec rm -rf "{}" \;bringt?
@thomas-braun said in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
Temp directories causing npm8 problem: 894
Hast du da mal als root herumgehampelt?
Das sollte deriob fixnämlich eigentlich bereinigen.wenn, dann unbewusst
-
@thomas-braun said in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
Temp directories causing npm8 problem: 894
Hast du da mal als root herumgehampelt?
Das sollte deriob fixnämlich eigentlich bereinigen.wenn, dann unbewusst
-
@federal sagte in ioBroker Backup wieder einspielen:
kann aber nach wie vor nicht auf iob zugreifen
@homoran sagte in ioBroker Backup wieder einspielen:
admin als https konfiguriert?
@homoran sagte in ioBroker Backup wieder einspielen:
und deaktiviert
@homoran said in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
kann aber nach wie vor nicht auf iob zugreifen
@homoran sagte in ioBroker Backup wieder einspielen:
admin als https konfiguriert?
@homoran sagte in ioBroker Backup wieder einspielen:
und deaktiviert
https war eingerichtet. Wie kann ich es deaktivieren?
-
@homoran sagte in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
load average: 2.40, 2.64, 2.80
hat auch gut zu rödeln!
ich werde anscheinend ignoriert
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@homoran sagte in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
load average: 2.40, 2.64, 2.80
hat auch gut zu rödeln!
ich werde anscheinend ignoriert
@homoran sagte in ioBroker Backup wieder einspielen:
ich werde anscheinend ignoriert
<4 ist doch i.O.
-
@homoran sagte in ioBroker Backup wieder einspielen:
ich werde anscheinend ignoriert
<4 ist doch i.O.
@thomas-braun aber nicht, wenn angeblich nichts läuft
-
@thomas-braun said in ioBroker Backup wieder einspielen:
Der admin läuft nicht.
iob start adminHast du zwischenzeitlich den
iob fixausgeführt?
leider unverändert
Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== pi@raspberrypi:/opt/iobroker/backups $ iob start pi@raspberrypi:/opt/iobroker/backups $ iob start admin The adapter "admin.0" was started. pi@raspberrypi:/opt/iobroker/backups $ iob list instances system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin system.adapter.backitup.0 : backitup : raspberrypi - disabled system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled system.adapter.chromecast.0 : chromecast : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled system.adapter.discovery.0 : discovery : raspberrypi - enabled system.adapter.echarts.0 : echarts : raspberrypi - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : raspberrypi - disabled system.adapter.feiertage.0 : feiertage : raspberrypi - enabled system.adapter.fullybrowser.0 : fullybrowser : raspberrypi - enabled system.adapter.harmony.0 : harmony : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.info.0 : info : raspberrypi - enabled system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi - enabled system.adapter.panasonic-comfort-cloud.0: panasonic-comfort-cloud: raspberrypi - enabled + system.adapter.ping.0 : ping : raspberrypi - enabled system.adapter.sayit.0 : sayit : raspberrypi - enabled, port: 0 system.adapter.sayit.1 : sayit : raspberrypi - enabled, port: 0 system.adapter.sayit.2 : sayit : raspberrypi - enabled, port: 0 system.adapter.sayit.3 : sayit : raspberrypi - enabled, port: 0 + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.sonoff.0 : sonoff : raspberrypi - enabled, port: 1883, bind: 0.0.0.0 system.adapter.tado.0 : tado : raspberrypi - enabled system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 system.adapter.text2command.1 : text2command : raspberrypi - enabled system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - enabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.weatherunderground.0 : weatherunderground : raspberrypi - enabled system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.worx.0 : worx : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0014D8F906-if00 + instance is alive pi@raspberrypi:/opt/iobroker/backups $unter iobroker logs --watch läuft was
@federal said in ioBroker Backup wieder einspielen:
@thomas-braun said in ioBroker Backup wieder einspielen:
Der admin läuft nicht.
iob start adminHast du zwischenzeitlich den
iob fixunter iobroker logs --watch läuft was
habe mal ein Ausschnitt gemacht
2023-04-03 20:15:16.039 - error: host.raspberrypi Caught by controller[0]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25 ) 2023-04-03 20:15:16.039 - error: host.raspberrypi Caught by controller[0]: at Socket.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/event_hand ler.js:151:20) 2023-04-03 20:15:16.040 - error: host.raspberrypi Caught by controller[0]: at Object.onceWrapper (node:events:628:26) 2023-04-03 20:15:16.040 - error: host.raspberrypi Caught by controller[0]: at Socket.emit (node:events:513:28) 2023-04-03 20:15:16.040 - error: host.raspberrypi Caught by controller[0]: at Socket.emit (node:domain:489:12) 2023-04-03 20:15:16.041 - error: host.raspberrypi Caught by controller[0]: at TCP.<anonymous> (node:net:301:12) 2023-04-03 20:15:16.041 - warn: host.raspberrypi instance system.adapter.shelly .0 terminated due to SIGTERM 2023-04-03 20:15:16.042 - info: host.raspberrypi instance system.adapter.shelly .0 terminated with code null () 2023-04-03 20:15:16.107 - warn: host.raspberrypi instance system.adapter.sonoff .0 terminated due to SIGTERM 2023-04-03 20:15:16.108 - info: host.raspberrypi instance system.adapter.sonoff .0 terminated with code null () 2023-04-03 20:15:16.201 - info: host.raspberrypi instance system.adapter.histor y.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2023-04-03 20:15:16.209 - info: tuya.0 (634) Terminated (START_IMMEDIATELY_AFTE R_STOP): Without reason 2023-04-03 20:15:16.889 - info: host.raspberrypi instance system.adapter.tuya.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2023-04-03 20:15:16.891 - info: host.raspberrypi All instances are stopped. 2023-04-03 20:15:16.889 - info: host.raspberrypi instance system.adapter.tuya.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2023-04-03 20:15:16.891 - info: host.raspberrypi All instances are stopped. 2023-04-03 20:15:19.754 - error: host.raspberrypi Cannot find view "system" for search "instance" : Connection is closed. 2023-04-03 20:15:19.756 - warn: host.raspberrypi instance system.adapter.zigbee .0 terminated due to SIGTERM 2023-04-03 20:15:19.756 - info: host.raspberrypi instance system.adapter.zigbee .0 terminated with code null () 2023-04-03 20:15:19.757 - info: host.raspberrypi All instances are stopped. 2023-04-03 20:15:19.754 - error: host.raspberrypi Cannot find view "system" for search "instance" : Connection is closed. 2023-04-03 20:15:19.756 - warn: host.raspberrypi instance system.adapter.zigbee .0 terminated due to SIGTERM 2023-04-03 20:15:19.756 - info: host.raspberrypi instance system.adapter.zigbee .0 terminated with code null () 2023-04-03 20:15:19.757 - info: host.raspberrypi All instances are stopped. 2023-04-03 20:15:25.061 - info: host.raspberrypi terminated 2023-04-03 20:15:25.061 - info: host.raspberrypi terminated -
@federal said in ioBroker Backup wieder einspielen:
@thomas-braun said in ioBroker Backup wieder einspielen:
Der admin läuft nicht.
iob start adminHast du zwischenzeitlich den
iob fixunter iobroker logs --watch läuft was
habe mal ein Ausschnitt gemacht
2023-04-03 20:15:16.039 - error: host.raspberrypi Caught by controller[0]: at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25 ) 2023-04-03 20:15:16.039 - error: host.raspberrypi Caught by controller[0]: at Socket.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/event_hand ler.js:151:20) 2023-04-03 20:15:16.040 - error: host.raspberrypi Caught by controller[0]: at Object.onceWrapper (node:events:628:26) 2023-04-03 20:15:16.040 - error: host.raspberrypi Caught by controller[0]: at Socket.emit (node:events:513:28) 2023-04-03 20:15:16.040 - error: host.raspberrypi Caught by controller[0]: at Socket.emit (node:domain:489:12) 2023-04-03 20:15:16.041 - error: host.raspberrypi Caught by controller[0]: at TCP.<anonymous> (node:net:301:12) 2023-04-03 20:15:16.041 - warn: host.raspberrypi instance system.adapter.shelly .0 terminated due to SIGTERM 2023-04-03 20:15:16.042 - info: host.raspberrypi instance system.adapter.shelly .0 terminated with code null () 2023-04-03 20:15:16.107 - warn: host.raspberrypi instance system.adapter.sonoff .0 terminated due to SIGTERM 2023-04-03 20:15:16.108 - info: host.raspberrypi instance system.adapter.sonoff .0 terminated with code null () 2023-04-03 20:15:16.201 - info: host.raspberrypi instance system.adapter.histor y.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2023-04-03 20:15:16.209 - info: tuya.0 (634) Terminated (START_IMMEDIATELY_AFTE R_STOP): Without reason 2023-04-03 20:15:16.889 - info: host.raspberrypi instance system.adapter.tuya.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2023-04-03 20:15:16.891 - info: host.raspberrypi All instances are stopped. 2023-04-03 20:15:16.889 - info: host.raspberrypi instance system.adapter.tuya.0 terminated with code 156 (START_IMMEDIATELY_AFTER_STOP) 2023-04-03 20:15:16.891 - info: host.raspberrypi All instances are stopped. 2023-04-03 20:15:19.754 - error: host.raspberrypi Cannot find view "system" for search "instance" : Connection is closed. 2023-04-03 20:15:19.756 - warn: host.raspberrypi instance system.adapter.zigbee .0 terminated due to SIGTERM 2023-04-03 20:15:19.756 - info: host.raspberrypi instance system.adapter.zigbee .0 terminated with code null () 2023-04-03 20:15:19.757 - info: host.raspberrypi All instances are stopped. 2023-04-03 20:15:19.754 - error: host.raspberrypi Cannot find view "system" for search "instance" : Connection is closed. 2023-04-03 20:15:19.756 - warn: host.raspberrypi instance system.adapter.zigbee .0 terminated due to SIGTERM 2023-04-03 20:15:19.756 - info: host.raspberrypi instance system.adapter.zigbee .0 terminated with code null () 2023-04-03 20:15:19.757 - info: host.raspberrypi All instances are stopped. 2023-04-03 20:15:25.061 - info: host.raspberrypi terminated 2023-04-03 20:15:25.061 - info: host.raspberrypi terminated -
@thomas-braun said in ioBroker Backup wieder einspielen:
Starte die Kiste mal durch...
Sauber!sudo rebootjetzt bin ich wieder am Anfang von heute
pi@raspberrypi:~ $ iobroker status node:internal/modules/cjs/loader:1024 throw err; Error: Cannot find module 'buffer-equal-constant-time' Require stack: - /opt/iobroker/node_modules/jwa/index.js - /opt/iobroker/node_modules/jws/lib/sign-stream.js - /opt/iobroker/node_modules/jws/index.js - /opt/iobroker/node_modules/jsonwebtoken/decode.js - /opt/iobroker/node_modules/jsonwebtoken/index.js - /opt/iobroker/node_modules/@iobroker/js-controller-common/lib/common/tools.js - /opt/iobroker/node_modules/@iobroker/js-controller-common/index.js - /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15) at Function.Module._load (node:internal/modules/cjs/loader:866:27) at Module.require (node:internal/modules/cjs/loader:1093:19) at require (node:internal/modules/cjs/helpers:108:18) at Object.<anonymous> (/opt/iobroker/node_modules/jwa/index.js:1:19) at Module._compile (node:internal/modules/cjs/loader:1191:14) at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10) at Module.load (node:internal/modules/cjs/loader:1069:32) at Function.Module._load (node:internal/modules/cjs/loader:904:12) at Module.require (node:internal/modules/cjs/loader:1093:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/jwa/index.js', '/opt/iobroker/node_modules/jws/lib/sign-stream.js', '/opt/iobroker/node_modules/jws/index.js', '/opt/iobroker/node_modules/jsonwebtoken/decode.js', '/opt/iobroker/node_modules/jsonwebtoken/index.js', '/opt/iobroker/node_modules/@iobroker/js-controller-common/lib/common/tools.js', '/opt/iobroker/node_modules/@iobroker/js-controller-common/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' -
@thomas-braun said in ioBroker Backup wieder einspielen:
load average: 12.11, 9.94, 6.40Was ist denn da los? Bei 4 ist die Kiste eigentlich dicht.
ich verstehe es leider nicht
-
@federal sagte in ioBroker Backup wieder einspielen:
ich verstehe es leider nicht
Ich auch nicht.
Die drei Zahlen sind die Auslastung der CPU im Moment, der letzten 5 und der letzten 15 Minuten. 1 ist dabei ein Kern, da dein RPI derer 4 hat ist 4 halt = 100%.
Irgendwas zieht da bei dir massiv Ressourcen, insbesondere da da vom iobroker her eigentlich nicht viel läuft macht das stutzig.Mit
topschauen was da los ist.
Edit: Mal zum Vergleich mein Rpi 4 / 8 GB:
echad@chet:~ $ uptime 20:42:40 up 8 days, 20:36, 2 users, load average: 0.42, 0.37, 0.35 -
@federal sagte in ioBroker Backup wieder einspielen:
ich verstehe es leider nicht
Ich auch nicht.
Die drei Zahlen sind die Auslastung der CPU im Moment, der letzten 5 und der letzten 15 Minuten. 1 ist dabei ein Kern, da dein RPI derer 4 hat ist 4 halt = 100%.
Irgendwas zieht da bei dir massiv Ressourcen, insbesondere da da vom iobroker her eigentlich nicht viel läuft macht das stutzig.Mit
topschauen was da los ist.
Edit: Mal zum Vergleich mein Rpi 4 / 8 GB:
echad@chet:~ $ uptime 20:42:40 up 8 days, 20:36, 2 users, load average: 0.42, 0.37, 0.35@thomas-braun said in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
ich verstehe es leider nicht
Ich auch nicht.
Die drei Zahlen sind die Auslastung der CPU im Moment, der letzten 5 und der letzten 15 Minuten. 1 ist dabei ein Kern, da dein RPI derer 4 hat ist 4 halt = 100%.
Irgendwas zieht da bei dir massiv Ressourcen, insbesondere da da vom iobroker her eigentlich nicht viel läuft macht das stutzig.Mit
topschauen was da los ist.
Edit: Mal zum Vergleich mein Rpi 4 / 8 GB:
echad@chet:~ $ uptime 20:42:40 up 8 days, 20:36, 2 users, load average: 0.42, 0.37, 0.35
-
@thomas-braun said in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
ich verstehe es leider nicht
Ich auch nicht.
Die drei Zahlen sind die Auslastung der CPU im Moment, der letzten 5 und der letzten 15 Minuten. 1 ist dabei ein Kern, da dein RPI derer 4 hat ist 4 halt = 100%.
Irgendwas zieht da bei dir massiv Ressourcen, insbesondere da da vom iobroker her eigentlich nicht viel läuft macht das stutzig.Mit
topschauen was da los ist.
Edit: Mal zum Vergleich mein Rpi 4 / 8 GB:
echad@chet:~ $ uptime 20:42:40 up 8 days, 20:36, 2 users, load average: 0.42, 0.37, 0.35Nach dem reboot schaut es gesünder aus.
-
Nach dem reboot schaut es gesünder aus.
@thomas-braun said in ioBroker Backup wieder einspielen:
Nach dem reboot schaut es gesünder aus.
iob ist immer noch nicht erreichbar.
Ich muss mich ausklinken. Danke an alle. -
@thomas-braun said in ioBroker Backup wieder einspielen:
Nach dem reboot schaut es gesünder aus.
iob ist immer noch nicht erreichbar.
Ich muss mich ausklinken. Danke an alle.@federal sagte in ioBroker Backup wieder einspielen:
iob ist immer noch nicht erreichbar.
Er läuft ja auch nicht.
-
@federal sagte in ioBroker Backup wieder einspielen:
iob ist immer noch nicht erreichbar.
Er läuft ja auch nicht.
@thomas-braun said in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
iob ist immer noch nicht erreichbar.
Er läuft ja auch nicht.
lässt sich auch nicht starten. Was kann ich noch tun?
das zeigt die Statusanzeige
pi@raspberrypi:~ $ iobroker status node:internal/modules/cjs/loader:1024 throw err; ^ Error: Cannot find module 'buffer-equal-constant-time' Require stack: - /opt/iobroker/node_modules/jwa/index.js - /opt/iobroker/node_modules/jws/lib/sign-stream.js - /opt/iobroker/node_modules/jws/index.js - /opt/iobroker/node_modules/jsonwebtoken/decode.js - /opt/iobroker/node_modules/jsonwebtoken/index.js - /opt/iobroker/node_modules/@iobroker/js-controller-common/lib/common/tools.js - /opt/iobroker/node_modules/@iobroker/js-controller-common/index.js - /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15) at Function.Module._load (node:internal/modules/cjs/loader:866:27) at Module.require (node:internal/modules/cjs/loader:1093:19) at require (node:internal/modules/cjs/helpers:108:18) at Object.<anonymous> (/opt/iobroker/node_modules/jwa/index.js:1:19) at Module._compile (node:internal/modules/cjs/loader:1191:14) at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10) at Module.load (node:internal/modules/cjs/loader:1069:32) at Function.Module._load (node:internal/modules/cjs/loader:904:12) at Module.require (node:internal/modules/cjs/loader:1093:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/jwa/index.js', '/opt/iobroker/node_modules/jws/lib/sign-stream.js', '/opt/iobroker/node_modules/jws/index.js', '/opt/iobroker/node_modules/jsonwebtoken/decode.js', '/opt/iobroker/node_modules/jsonwebtoken/index.js', '/opt/iobroker/node_modules/@iobroker/js-controller-common/lib/common/tools.js', '/opt/iobroker/node_modules/@iobroker/js-controller-common/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js' -
@thomas-braun said in ioBroker Backup wieder einspielen:
@federal sagte in ioBroker Backup wieder einspielen:
iob ist immer noch nicht erreichbar.
Er läuft ja auch nicht.
lässt sich auch nicht starten. Was kann ich noch tun?
das zeigt die Statusanzeige
pi@raspberrypi:~ $ iobroker status node:internal/modules/cjs/loader:1024 throw err; ^ Error: Cannot find module 'buffer-equal-constant-time' Require stack: - /opt/iobroker/node_modules/jwa/index.js - /opt/iobroker/node_modules/jws/lib/sign-stream.js - /opt/iobroker/node_modules/jws/index.js - /opt/iobroker/node_modules/jsonwebtoken/decode.js - /opt/iobroker/node_modules/jsonwebtoken/index.js - /opt/iobroker/node_modules/@iobroker/js-controller-common/lib/common/tools.js - /opt/iobroker/node_modules/@iobroker/js-controller-common/index.js - /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js - /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15) at Function.Module._load (node:internal/modules/cjs/loader:866:27) at Module.require (node:internal/modules/cjs/loader:1093:19) at require (node:internal/modules/cjs/helpers:108:18) at Object.<anonymous> (/opt/iobroker/node_modules/jwa/index.js:1:19) at Module._compile (node:internal/modules/cjs/loader:1191:14) at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10) at Module.load (node:internal/modules/cjs/loader:1069:32) at Function.Module._load (node:internal/modules/cjs/loader:904:12) at Module.require (node:internal/modules/cjs/loader:1093:19) { code: 'MODULE_NOT_FOUND', requireStack: [ '/opt/iobroker/node_modules/jwa/index.js', '/opt/iobroker/node_modules/jws/lib/sign-stream.js', '/opt/iobroker/node_modules/jws/index.js', '/opt/iobroker/node_modules/jsonwebtoken/decode.js', '/opt/iobroker/node_modules/jsonwebtoken/index.js', '/opt/iobroker/node_modules/@iobroker/js-controller-common/lib/common/tools.js', '/opt/iobroker/node_modules/@iobroker/js-controller-common/index.js', '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js', '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'Last login: Tue Apr 4 15:43:58 2023 from 100.75.198.95 echad@chet:~ $ cd /opt/iobroker/ echad@chet:/opt/iobroker $ npm ls buffer-equal-constant-time iobroker.inst@3.0.0 /opt/iobroker ├─┬ iobroker.backitup@2.6.16 │ └─┬ google-auth-library@8.7.0 │ └─┬ jws@4.0.0 │ └─┬ jwa@2.0.0 │ └── buffer-equal-constant-time@1.0.1 └─┬ iobroker.js-controller@5.0.1-alpha.0-20230403-fd495c2e └─┬ jsonwebtoken@9.0.0 └─┬ jws@3.2.2 └─┬ jwa@1.4.1 └── buffer-equal-constant-time@1.0.1 deduped echad@chet:/opt/iobroker $Ich würde den js-controller nochmal installieren.
-
Last login: Tue Apr 4 15:43:58 2023 from 100.75.198.95 echad@chet:~ $ cd /opt/iobroker/ echad@chet:/opt/iobroker $ npm ls buffer-equal-constant-time iobroker.inst@3.0.0 /opt/iobroker ├─┬ iobroker.backitup@2.6.16 │ └─┬ google-auth-library@8.7.0 │ └─┬ jws@4.0.0 │ └─┬ jwa@2.0.0 │ └── buffer-equal-constant-time@1.0.1 └─┬ iobroker.js-controller@5.0.1-alpha.0-20230403-fd495c2e └─┬ jsonwebtoken@9.0.0 └─┬ jws@3.2.2 └─┬ jwa@1.4.1 └── buffer-equal-constant-time@1.0.1 deduped echad@chet:/opt/iobroker $Ich würde den js-controller nochmal installieren.
@thomas-braun said in ioBroker Backup wieder einspielen:
Last login: Tue Apr 4 15:43:58 2023 from 100.75.198.95 echad@chet:~ $ cd /opt/iobroker/ echad@chet:/opt/iobroker $ npm ls buffer-equal-constant-time iobroker.inst@3.0.0 /opt/iobroker ├─┬ iobroker.backitup@2.6.16 │ └─┬ google-auth-library@8.7.0 │ └─┬ jws@4.0.0 │ └─┬ jwa@2.0.0 │ └── buffer-equal-constant-time@1.0.1 └─┬ iobroker.js-controller@5.0.1-alpha.0-20230403-fd495c2e └─┬ jsonwebtoken@9.0.0 └─┬ jws@3.2.2 └─┬ jwa@1.4.1 └── buffer-equal-constant-time@1.0.1 deduped echad@chet:/opt/iobroker $Ich würde den js-controller nochmal installieren.
wie mache ich das?
Support us
359
Online32.5k
Benutzer81.7k
Themen1.3m
Beiträge