UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[MartyBr]

@issr4k Danke. Das teste ich morgen und gebe hier Rückmeldung.
Ich suche weiterhin verzweifelt Datenpunkte der VitoVent. Genauer die Temperaturen für Zuluft und Abluft. Die Volumenströme habe ich gefunden, die stehen auch in meinem Handbuch der Vitocom Steuerung.
Im FHEM Forum hat eine User geschrieben, dass die Datenpunkte 3 Bit Länge haben, und auf 2-Bit umgerechnet werden müssen:

POLL, 01F70A0302, 2ByteS, 10,            Fortlufttemperatur                             , -
POLL, 01F70A0102, 2ByteS, 10,            Zulufttemperatur                             , -
POLL, 01F70A0202, 2ByteS, 10,            Ablufttemperatur            

Das sind dann die Datenpunkte "0A01" bis "0A03". Die Datenpunkte "F0A0" etc. kann ich ohne Probleme auslesen.

Hallo zusammen,

ich habs zumindest für einige Werte gelöst. Hab in einem anderen Thread noch einen Tipp gefunden: Man muss das als drei Bytes lesen aber als zwei interpretieren (fragt mich nicht, was man rauchen muss, um auf solche Konstrukte zu kommen). Hier mal der Ausschnitt aus meiner Konfig für eine WO1C Wärempumpe mit angebunder Vitovent 300W Lüftung:

Code: [Auswählen]
#       Lüftung
POLL, 01F7B00501, 1ByteU, 1,            Lueftung_Betriebsart                            , -
SET, Einstellung_Lueftung,   01F4B00501, 1ByteU , -        # kann man dann mit 66 auf Intensivbetrieb setzen
POLL, 01F70A7E01, 1ByteH, 1,            Lueftung_Betriebsprogramm                             , -
POLL, 01F70A0103, 2ByteS, 10,            Lueftung_Zulufttemperatur                             , -
POLL, 01F70A0203, 2ByteS, 10,            Lueftung_Ablufttemperatur                             , -
POLL, 01F70A0003, 2ByteS, 10,            Lueftung_AussentemperaturLueftung                             , -
POLL, 01F70A0403, 2ByteU, 1,  Lueftung_Zuluft_Volumenstrom, -
POLL, 01F70A0C03, 2ByteS, 1,  Lueftung_Elek_Vorheiz, -
POLL, 01F70A0D03, 2ByteU, 1,  Lueftung_Bypass, -
POLL, 01F70A0E03, 2ByteU, 1,  Lueftung_Filterstandzeit, -
POLL, 01F70A0303, 2ByteS,10 ,Lueftung_Fortlufttemperatur, -
POLL, 01F70A0503, 2ByteU,1  ,Lueftung_Fortluft_Volumenstrom, -
POLL, 01F70A0403, 2ByteU,1  ,Lueftung_Zuluft_Volumenstrom, -

Für Fortluft- und Zulufttemperatur funktioniert es damit leider nicht, passt aber, so lange die anderen beiden Temperaturen gescheite Werte liefern.

Noch ein komisches Phänomen: Die geänderte Einstellung für Intensivbetrieb bei SET wird erst übernommen wenn das Byte nochmal per POLL ausgelesen wird. Weiss jemand zufällig wie man das evtl. noch umgehen kann?

Danke, mohel

Hier der LinK:
https://forum.fhem.de/index.php?topic=104786.0

[Issr4k]

@martybr Da muss ich leider passen... sorry!

[MartyBr]

@issr4k
Ich versuche mich mal daran. Ich setze heute Abend die <len> auf 3 und schaue mir das Ergebnis an. Wir die Leute im FHEM-Forum schon geschrieben haben:
Zitat Anfang:Sehr strange mit 3 Byte auslesen und 2 Byte zur Anzeige nutzen. Typisch Viessmann
Zitat Ende:

[MartyBr]

@martybr
Es hat funktioniert!!
Ich konnte die Werte der VitoVent-300F auslesen. Das Geheimnis war, die Länge auf 3 zustellen
Nun kann ich mich an die Integration des Heizstabes setzen. Die Datenpunkte habe ich ja schon in der Vito.xml eingefügt.

[Happyuser20]

Hallo zusammen

Ich schließe mich mal hier an.
Ich nutze den Adapter schon längere Zeit in der letzten Version ohne Probleme.
Meine Anlage ist eine Vitodens200 /KW2

Jetzt möchte ich einige Setzdatenpunkte hinzufügen, habe auch schon eine entsprechende vito.xml gefunden.
Wenn ich aber im Adapter den Haken bei Vito.xml neu einlesen setze, startet der Adapter nicht mehr durch.
Erst wenn ich den Haken wieder entferne, läuft er wieder wie gewohnt.

Ist das bei euch auch so?

Gruß
HappyUser20

[MartyBr]

@happyuser20
Ja. Bisheriger Workaround: Instanz entfernen und wieder neu hinzufügen.
Vorteil: Es funktioniert
Nachteil: Alle Datenpunkte werden neu geschrieben. Die History-Funktion (egal ob History oder Influxdb) müssen neu aktiviert werden.

[blauholsten]

Kann jemand bitte die GitHub Version testen? Hatte ich vor Einigen Tagen schonmal drum gebeten.

Danke

[MartyBr]

@blauholsten
Das mache ich heute Abend. Versprochen :innocent:

[Happyuser20]

@martybr Danke für den Hinweis, hat funktioniert.

[Happyuser20]

Halo zusammen.

wie sieht es bei euren Steuerungen aus, funktioniert die Abfrage der Timer oder Error Codes?
Bei meiner V200/Kw2 bekomme ich Fehlermeldungen "unknown command"

Nutzt einer hier die Setzdatenpunkte?

Gruß
Happyuser20

[MartyBr]

@blauholsten
Hier meine Testergebnisse. Leider war es nicht erfolgreich.

Ich habe folgendes gemacht:

1. Update per Github
2. vito.xml geändert
3. Instanz: Schraubenschlüssel: vito.xml angehakt und gespeichert.

Ergebnis: Die Datenpunkte ändern sich nicht, die Instanz läuft und stürzt nicht mehr ab.

Lokaler Telnet:

martin@tinkerboard:~$ telnet localhost 3002
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
vctrld>getTempA
3.500000 °C
vctrld>quit
good bye!
Connection closed by foreign host.

vito.xml:
vito.xml

Adapter json (das Kennwort habe ich unkenntlich gemacht):
system.adapter.viessmann.0.json

In der vito.xml gibt es den Abfragewert "getTempA".
Im Adapter steht noch der ehemalige Wert "Aussentemperatur".

[blauholsten]

@martybr

Bitte nochmal testen und LOG posten. Danke

PS: Finde aktuell keine Zeit/Möglichkeit das aktuell selber zu testen

[MartyBr]

@blauholsten Adapter auf "debug" oder die Log-Datei /etc/iobroker/x.log?
Da komme ich erst wieder heute Abend dazu, da ich gerade im Office bin.

[blauholsten]

@martybr

Hallo,

einfach den Adapter vorher auf debug stellen, danach alles Ausgaben kopieren und mir senden.

[MartyBr]

@blauholsten
Okay, das mache ich dann heute Abend. Ich starte den Adapter erstmal mit der bestehenden Konfiguration und ändere dann die vito.xml.

Ist das so okay?

[blauholsten]

@martybr ja top.

Kurze Anmerkung, die aktuelle GitHub Version natürlich vorausgesetzt.

[MartyBr]

@blauholsten So, hier der Test.
Ich hatte gestern die GitHub Version installiert.

1. Schritt:
   Adapter auf debug und start:

	2023-03-15 19:37:36.660	debug	Wait for next run: 60000 in ms

viessmann.0
2023-03-15 19:37:36.659	info	Connect with Viessmann sytem!

viessmann.0
2023-03-15 19:37:36.639	info	starting. Version 1.4.2 (non-npm: misanorot/ioBroker.viessmann) in /opt/iobroker/node_modules/iobroker.viessmann, node: v18.14.2, js-controller: 4.0.24

viessmann.0
2023-03-15 19:37:36.510	debug	States connected to redis: 127.0.0.1:9000

viessmann.0
2023-03-15 19:37:36.443	debug	States create User PubSub Client

viessmann.0
2023-03-15 19:37:36.443	debug	States create System PubSub Client

viessmann.0
2023-03-15 19:37:36.424	debug	Redis States: Use Redis connection: 127.0.0.1:9000

viessmann.0
2023-03-15 19:37:36.403	debug	Objects connected to redis: 127.0.0.1:9001

viessmann.0
2023-03-15 19:37:36.400	debug	Objects client initialize lua scripts

viessmann.0
2023-03-15 19:37:36.355	debug	Objects create User PubSub Client

viessmann.0
2023-03-15 19:37:36.354	debug	Objects create System PubSub Client

viessmann.0
2023-03-15 19:37:36.353	debug	Objects client ready ... initialize now

viessmann.0
2023-03-15 19:37:36.324	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001
host.iobroker-test
2023-03-15 19:37:35.871	info	instance system.adapter.viessmann.0 started with pid 218592

2. Schritt:
   geänderte vito.xml eingespielt und start des Adapters:

viessmann.0
2023-03-15 19:42:31.088	warn	No instance found!

viessmann.0
2023-03-15 19:42:31.068	info	starting. Version 1.4.2 (non-npm: misanorot/ioBroker.viessmann) in /opt/iobroker/node_modules/iobroker.viessmann, node: v18.14.2, js-controller: 4.0.24

viessmann.0
2023-03-15 19:42:30.922	debug	States connected to redis: 127.0.0.1:9000

viessmann.0
2023-03-15 19:42:30.852	debug	States create User PubSub Client

viessmann.0
2023-03-15 19:42:30.851	debug	States create System PubSub Client

viessmann.0
2023-03-15 19:42:30.836	debug	Redis States: Use Redis connection: 127.0.0.1:9000

viessmann.0
2023-03-15 19:42:30.816	debug	Objects connected to redis: 127.0.0.1:9001

viessmann.0
2023-03-15 19:42:30.813	debug	Objects client initialize lua scripts

viessmann.0
2023-03-15 19:42:30.771	debug	Objects create User PubSub Client

viessmann.0
2023-03-15 19:42:30.771	debug	Objects create System PubSub Client

viessmann.0
2023-03-15 19:42:30.770	debug	Objects client ready ... initialize now

viessmann.0
2023-03-15 19:42:30.741	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001
host.iobroker-test
2023-03-15 19:42:30.280	info	instance system.adapter.viessmann.0 started with pid 218629

Interssanterweise wird der Adapter trotz der Warnung grün:

[blauholsten]

@martybr danke hat mir weiter geholfen. Schaue die Tage

[blauholsten]

@martybr

Bitte nochmal folgende Verfahrensweise testen:

1. Adapter config sichern
2. Adapter deinstallieren
3. Adapter über Github installieren, Instanz erzeugen und auf debug stellen
4. Config laden
5. Nachdem alles klappt, Option neues einlesen auswählen
6. Log hier posten

Danke

[MartyBr]

@blauholsten
Alle Schritte durchgeführt. Zur Beachtung:
Die vito.xml ist die Originale, nicht die zum Test geänderte Version. In der Config ist möglicherweise noch die geänderte Version hinterlegt (als Datenpunkte).

Hier das Log:

viessmann.0
2023-03-16 20:02:48.014	warn	No instance found! null

viessmann.0
2023-03-16 20:02:48.004	info	Start read new XML...

viessmann.0
2023-03-16 20:02:47.992	info	starting. Version 1.4.2 (non-npm: misanorot/ioBroker.viessmann) in /opt/iobroker/node_modules/iobroker.viessmann, node: v18.14.2, js-controller: 4.0.24

viessmann.0
2023-03-16 20:02:47.849	debug	States connected to redis: 127.0.0.1:9000

viessmann.0
2023-03-16 20:02:47.783	debug	States create User PubSub Client

viessmann.0
2023-03-16 20:02:47.782	debug	States create System PubSub Client

viessmann.0
2023-03-16 20:02:47.766	debug	Redis States: Use Redis connection: 127.0.0.1:9000

viessmann.0
2023-03-16 20:02:47.745	debug	Objects connected to redis: 127.0.0.1:9001

viessmann.0
2023-03-16 20:02:47.743	debug	Objects client initialize lua scripts

viessmann.0
2023-03-16 20:02:47.698	debug	Objects create User PubSub Client

viessmann.0
2023-03-16 20:02:47.697	debug	Objects create System PubSub Client

viessmann.0
2023-03-16 20:02:47.697	debug	Objects client ready ... initialize now

viessmann.0
2023-03-16 20:02:47.670	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001

viessmann.0
2023-03-16 20:01:35.884	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

viessmann.0
2023-03-16 20:01:35.883	info	terminating

viessmann.0
2023-03-16 20:01:35.883	info	cleaned everything up...

viessmann.0
2023-03-16 20:01:35.882	info	Got terminate signal TERMINATE_YOURSELF

viessmann.0
2023-03-16 20:01:28.559	warn	cannot read vito.xml Error: ENOENT: no such file or directory, open '/etc/vcontrold/vito.xml'

viessmann.0
2023-03-16 20:01:28.552	warn	cannot read vcontrold.xml Error: ENOENT: no such file or directory, open '/etc/vcontrold/vcontrold.xml'

viessmann.0
2023-03-16 20:01:28.535	info	starting. Version 1.4.2 (non-npm: misanorot/ioBroker.viessmann) in /opt/iobroker/node_modules/iobroker.viessmann, node: v18.14.2, js-controller: 4.0.24

Der Adapter ist nicht grün geworden.

Edit:
Zweiter Versuch:

Ich habe die Instanz gelöscht und die Angaben manuell gemacht. Damit war die Datenpunktliste leer und der Adapter hat alles neu eingelesen.
Er wurde auch grün!

viessmann.0
2023-03-16 20:09:15.224	debug	Wait for next run: 60000 in ms

viessmann.0
2023-03-16 20:09:15.223	info	Connect with Viessmann sytem!

viessmann.0
2023-03-16 20:09:15.202	info	starting. Version 1.4.2 (non-npm: misanorot/ioBroker.viessmann) in /opt/iobroker/node_modules/iobroker.viessmann, node: v18.14.2, js-controller: 4.0.24

viessmann.0
2023-03-16 20:09:15.062	debug	States connected to redis: 127.0.0.1:9000

viessmann.0
2023-03-16 20:09:14.991	debug	States create User PubSub Client

viessmann.0
2023-03-16 20:09:14.991	debug	States create System PubSub Client

viessmann.0
2023-03-16 20:09:14.976	debug	Redis States: Use Redis connection: 127.0.0.1:9000

viessmann.0
2023-03-16 20:09:14.955	debug	Objects connected to redis: 127.0.0.1:9001

viessmann.0
2023-03-16 20:09:14.953	debug	Objects client initialize lua scripts

viessmann.0
2023-03-16 20:09:14.906	debug	Objects create User PubSub Client

viessmann.0
2023-03-16 20:09:14.905	debug	Objects create System PubSub Client

viessmann.0
2023-03-16 20:09:14.903	debug	Objects client ready ... initialize now

viessmann.0
2023-03-16 20:09:14.875	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001
host.iobroker-test
2023-03-16 20:09:14.440	info	instance system.adapter.viessmann.0 started with pid 238875
host.iobroker-test
2023-03-16 20:09:11.879	info	instance system.adapter.viessmann.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
host.iobroker-test
2023-03-16 20:09:11.362	info	stopInstance system.adapter.viessmann.0 send kill signal

viessmann.0
2023-03-16 20:09:11.317	debug	Wait for next run: 60000 in ms

viessmann.0
2023-03-16 20:09:11.316	info	Connect with Viessmann sytem!

viessmann.0
2023-03-16 20:09:11.316	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason

viessmann.0
2023-03-16 20:09:11.315	info	terminating

viessmann.0
2023-03-16 20:09:11.315	info	cleaned everything up...

viessmann.0
2023-03-16 20:09:11.315	info	Got terminate signal TERMINATE_YOURSELF

viessmann.0
2023-03-16 20:09:11.312	info	read vito.xml successfull
host.iobroker-test
2023-03-16 20:09:11.311	info	stopInstance system.adapter.viessmann.0 (force=false, process=true)

viessmann.0
2023-03-16 20:09:11.295	debug	Objects are: {"gets":{"Aussentemperatur":{"name":"Aussentemperatur","unit":"°C","type":"number","description":"Ermittle Aussentemperatur in Grad C (-40..70)","polling":-1,"command":"getAussentemperatur"},"TempRaumIst":{"name":"TempRaumIst","unit":"°C","type":"number","description":"Heizkreis HK1: Raumtemperatur HK1 (0..40)","polling":-1,"command":"getTempRaumIst"},"TempRaumSoll":{"name":"TempRaumSoll","unit":"°C","type":"number","description":"Heizkreis HK1: Raumsolltemperatur HK1 von FB (10..30)","polling":-1,"command":"getTempRaumSoll"},"TempRaumSollNormal":{"name":"TempRaumSollNormal","unit":"°C","type":"number","description":"Bedienung HK1 - Heizkreis 1: Raumsolltemperatur normal ","polling":-1,"command":"getTempRaumSollNormal"},"TempRaumSollRed":{"name":"TempRaumSollRed","unit":"°C","type":"number","description":"Raumsolltemperatur reduzierter Betrieb","polling":-1,"command":"getTempRaumSollRed"},"TempRaumSollParty":{"name":"TempRaumSollParty","unit":"°C","type":"number","description":"Bedienung HK1 - Heizkreis 1: Party Solltemperatur (10..30)","polling":-1,"command":"getTempRaumSollParty"},"Raumtemperatur":{"name":"Raumtemperatur","unit":"°C","type":"number","description":"HK1 Heizkreis 1 Wertebereich 10 - 30","polling":-1,"command":"getRaumtemperatur"},"TempWWIstOben":{"name":"TempWWIstOben","unit":"°C","type":"number","description":"Information Warmwasser Wertebereich 0 - 95","polling":-1,"command":"getTempWWIstOben"},"TempWWSoll":{"name":"TempWWSoll","unit":"°C","type":"number","description":"WW - Warmwassersolltemperatur (10..60 (95))","polling":-1,"command":"getTempWWSoll"},"TempWWSoll_2":{"name":"TempWWSoll_2","unit":"°C","type":"number","description":"WW - Zweiter Sollwert (10..60 (95))","polling":-1,"command":"getTempWWSoll_2"},"StatusV1":{"name":"StatusV1","unit":"","type":"string","description":"Status Verdichter 1 (0..1)","polling":-1,"command":"getStatusV1"},"StatusPumpe":{"name":"StatusPumpe","unit":"","type":"string","description":"Status HK1: Heizkreispumpe (0..1)","polling":-1,"command":"getStatusPumpe"},"StatusPumpeZirk":{"name":"StatusPumpeZirk","unit":"","type":"string","description":"Status Zirkulationspumpe (0..1","polling":-1,"command":"getStatusPumpeZirk"},"PumpZirk_Betriebsstunden":{"name":"PumpZirk_Betriebsstunden","unit":"Stunden","type":"number","description":"Betriebsstunden Zirkulationspumpe","polling":-1,"command":"getPumpZirk_Betriebsstunden"},"StatusSpeicherPumpe":{"name":"StatusSpeicherPumpe","unit":"","type":"string","description":"Information - Warmwasser: Speicherladepumpe (0..1)","polling":-1,"command":"getStatusSpeicherPumpe"},"BetriebsstundenPumpeHK1":{"name":"BetriebsstundenPumpeHK1","unit":"","type":"number","description":"Betriebsstunden Anlage Wertebereich 0 - 1150000","polling":-1,"command":"getBetriebsstundenPumpeHK1"},"TempSekVL":{"name":"TempSekVL","unit":"°C","type":"number","description":"HK1: Vorlauftemperatur Sekundaer 1 (0..95)","polling":-1,"command":"getTempSekVL"},"TempSekRL":{"name":"TempSekRL","unit":"°C","type":"number","description":"HK1: Ruecklauftemperatur Sekundaer 1 (0..95)","polling":-1,"command":"getTempSekRL"},"TempPriVL":{"name":"TempPriVL","unit":"°C","type":"number","description":"Vorlauftemperatur Primaerquelle (-20..95)","polling":-1,"command":"getTempPriVL"},"TempPriRL":{"name":"TempPriRL","unit":"°C","type":"number","description":"Ruecklauftemperatur Primaerquelle (-20..95)","polling":-1,"command":"getTempPriRL"},"TempKuehlVL":{"name":"TempKuehlVL","unit":"°C","type":"number","description":"Heizkreis HK1: Vorlauftemperatur Kuehlkreis 1 (0..95)","polling":-1,"command":"getTempKuehlVL"},"StatusQuellePri1":{"name":"StatusQuellePri1","unit":"","type":"string","description":"Diagnose - Anlagenuebersicht: Primaerquelle 1 (Vent. oder Primaerpumpe (0..1)","polling":-1,"command":"getStatusQuellePri1"},"StatusSekPumpe":{"name":"StatusSekPumpe","unit":"","type":"string","description":"Anlagenuebersicht: Sekundaerpumpe 1 (0..1)","polling":-1,"command":"getStatusSekPumpe"},"StatusVentilWW":{"name":"StatusVentilWW","unit":"","type":"string","description":"Waermepumpe: 3-W-Ventil Heizen WW1 (0 (Heizen)..1 (WW))","polling":-1,"command":"getStatusVentilWW"},"StatusVentilWW2":{"name":"StatusVentilWW2","unit":"","type":"string","description":"Waermepumpe: 3-W-Ventil Heizen WW2 (0 (Heizen)..1 (WW))","polling":-1,"command":"getStatusVentilWW2"},"StatusAC":{"name":"StatusAC","unit":"","type":"string","description":"Heizkreis HK1: Kuehlung fuer HK1 (0..1)","polling":-1,"command":"getStatusAC"},"TempVLSoll":{"name":"TempVLSoll","unit":"°C","type":"number","description":"Heizkreis HK1: Vorlaufsolltemperatur HK1 (0..95)","polling":-1,"command":"getTempVLSoll"},"LastVerdichter":{"name":"LastVerdichter","unit":"","type":"number","description":"Last am Verdichter","polling":-1,"command":"getLastVerdichter"},"HKLNiveau":{"name":"HKLNiveau","unit":"","type":"number","description":"Heizkreis 1: Niveau der Heizkennlinie (-15..40)","polling":-1,"command":"getHKLNiveau"},"HKLNeigung":{"name":"HKLNeigung","unit":"","type":"number","description":"Heizkreis 1: Neigung der Heizkennlinie (0..35)","polling":-1,"command":"getHKLNeigung"},"PwrSollVerdichter":{"name":"PwrSollVerdichter","unit":"","type":"number","description":"Anlagenuebersicht: Soll-Leistung Verdichter 1 (0..100)","polling":-1,"command":"getPwrSollVerdichter"},"KKLNiveau":{"name":"KKLNiveau","unit":"","type":"number","description":"Heizkreis 1: Niveau Kuehlkennlinie (-15..40)","polling":-1,"command":"getKKLNiveau"},"KKLNeigung":{"name":"KKLNeigung","unit":"","type":"number","description":"Heizkreis 1: Neigung Kuehlkennlinie (0..35)","polling":-1,"command":"getKKLNeigung"},"EnergieHeizwaerme":{"name":"EnergieHeizwaerme","unit":"","type":"number","description":"Energiebilanz: Heizwärme \"Heizbetrieb\", Verdichter 1","polling":-1,"command":"getEnergieHeizwaerme"},"EnergieHeizwaermeWW":{"name":"EnergieHeizwaermeWW","unit":"","type":"number","description":"Energiebilanz: Heizwärme \"WW-Betrieb\", Verdichter 1","polling":-1,"command":"getEnergieHeizwaermeWW"},"EnergieHeizelektro":{"name":"EnergieHeizelektro","unit":"","type":"number","description":"Energiebilanz: Elektroenergie \"Heizbetrieb\", Verdichter 1","polling":-1,"command":"getEnergieHeizelektro"},"EnergieWWelektro":{"name":"EnergieWWelektro","unit":"","type":"number","description":"Energiebilanz: Elektroenergie \"WW-Betrieb\", Verdichter 1","polling":-1,"command":"getEnergieWWelektro"},"JAZ":{"name":"JAZ","unit":"","type":"number","description":"Energiebilanz: Jahresarbeitszahl (0..10)","polling":-1,"command":"getJAZ"},"JAZHeiz":{"name":"JAZHeiz","unit":"","type":"number","description":"Energiebilanz: Jahresarbeitszahl Heizen (0..10)","polling":-1,"command":"getJAZHeiz"},"JAZWW":{"name":"JAZWW","unit":"","type":"number","description":"Energiebilanz: Jahresarbeitszahl WW (0..10)","polling":-1,"command":"getJAZWW"},"COPHeiz":{"name":"COPHeiz","unit":"","type":"number","description":"Energiebilanz: COP Heizbetrieb (0..10)","polling":-1,"command":"getCOPHeiz"},"Betriebsart":{"name":"Betriebsart","unit":"","type":"string","description":"Heizkreis 1: Betriebsart (0..4)","polling":-1,"command":"getBetriebsart"},"1xWW":{"name":"1xWW","unit":"","type":"string","description":"1 malige Warmwasserbereitung","polling":-1,"command":"get1xWW"},"Heater":{"name":"Heater","unit":"","type":"number","description":"Leistung Durchlauferhitzer (1=3, 2=6 oder 3=9kW)","polling":-1,"command":"getHeater"},"Compressor":{"name":"Compressor","unit":"","type":"number","description":"Freigabe Verdichterstufe (1=WW 2=Heiz 3=WW+Heiz 15=default)","polling":-1,"command":"getCompressor"},"MinZuluftBypass":{"name":"MinZuluftBypass","unit":"°C","type":"number","description":"Minimale Zulufttemperatur für den ByPass in Grad 0,1 °C","polling":-1,"command":"getMinZuluftBypass"},"AussenLuftTemp":{"name":"AussenLuftTemp","unit":"°C","type":"number","description":"Aussentemperatur VitoVent in Grad 0,1 °C","polling":-1,"command":"getAussenLuftTemp"},"ZuluftTemp":{"name":"ZuluftTemp","unit":"°C","type":"number","description":"Zulufttemperatur VitoVent in Grad 0,1 °C","polling":-1,"command":"getZuluftTemp"},"AbluftTemp":{"name":"AbluftTemp","unit":"°C","type":"number","description":"Ablufttemperatur VitoVent in Grad 0,1 °C","polling":-1,"command":"getAbluftTemp"},"FortluftTemp":{"name":"FortluftTemp","unit":"°C","type":"number","description":"Fortlufttemperatur VitoVent in Grad 0,1 °C","polling":-1,"command":"getFortluftTemp"},"AbluftTempSoll":{"name":"AbluftTempSoll","unit":"°C","type":"number","description":"Ablufttemperatur-Sollwert in Grad 0,1 °C","polling":-1,"command":"getAbluftTempSoll"},"VolstromRed":{"name":"VolstromRed","unit":"","type":"number","description":"Volumenstrom reduzierte Lüftung in m3","polling":-1,"command":"getVolstromRed"},"VolstromNormal":{"name":"VolstromNormal","unit":"","type":"number","description":"Volumenstrom normale Lüftung in m3","polling":-1,"command":"getVolstromNormal"},"VolstromIntensiv":{"name":"VolstromIntensiv","unit":"","type":"number","description":"Volumenstrom intensive Lüftung in m3","polling":-1,"command":"getVolstromIntensiv"}},"sets":{"TempRaumSollNormal":{"name":"TempRaumSollNormal","description":"Setze Soll-Raumtemperatur (10..30)","polling":"nicht möglich","type":"number","command":"setTempRaumSollNormal"},"TempRaumSollRed":{"name":"TempRaumSollRed","description":"Setze Raumsolltemperatur reduzierter Betrieb (10..30)","polling":"nicht möglich","type":"number","command":"setTempRaumSollRed"},"TempRaumSollParty":{"name":"TempRaumSollParty","description":"Setze Party Solltemperatur (10..30)","polling":"nicht möglich","type":"number","command":"setTempRaumSollParty"},"Raumtemperatur":{"name":"Raumtemperatur","description":"RT auf xxC","polling":"nicht möglich","type":"number","command":"setRaumtemperatur"},"Raumtemperatur16":{"name":"Raumtemperatur16","description":"Raumtemperatur auf 16C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur16"},"Raumtemperatur17":{"name":"Raumtemperatur17","description":"Raumtemperatur auf 17C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur17"},"Raumtemperatur18":{"name":"Raumtemperatur18","description":"Raumtemperatur auf 18C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur18"},"Raumtemperatur19":{"name":"Raumtemperatur19","description":"Raumtemperatur auf 19C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur19"},"Raumtemperatur20":{"name":"Raumtemperatur20","description":"Raumtemperatur auf 20C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur20"},"Raumtemperatur21":{"name":"Raumtemperatur21","description":"Raumtemperatur auf 21C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur21"},"Raumtemperatur22":{"name":"Raumtemperatur22","description":"Raumtemperatur auf 22C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur22"},"Raumtemperatur23":{"name":"Raumtemperatur23","description":"Raumtemperatur auf 23C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur23"},"Raumtemperatur24":{"name":"Raumtemperatur24","description":"Raumtemperatur auf 24C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur24"},"Raumtemperatur25":{"name":"Raumtemperatur25","description":"Raumtemperatur auf 25C","polling":"nicht möglich","type":"number","command":"setRaumtemperatur25"},"TempWWSoll":{"name":"TempWWSoll","description":"Setze WW: Warmwassersolltemperatur (10..60 (95))","polling":"nicht möglich","type":"number","command":"setTempWWSoll"},"TempWWSoll_2":{"name":"TempWWSoll_2","description":"Setze WW - Zweiter Sollwert (10..60 (95))","polling":"nicht möglich","type":"number","command":"setTempWWSoll_2"},"HKLNiveau":{"name":"HKLNiveau","description":"Setzen Heizkreis 1: Niveau der Heizkennlinie (-15..40)","polling":"nicht möglich","type":"number","command":"setHKLNiveau"},"HKLNeigung":{"name":"HKLNeigung","description":"Setzen Heizkreis 1: Neigung der Heizkennlinie (0..35)","polling":"nicht möglich","type":"number","command":"setHKLNeigung"},"KKLNiveau":{"name":"KKLNiveau","description":"Setzen Heizkreis 1: Niveau Kuehlkennlinie (-15..40)","polling":"nicht möglich","type":"number","command":"setKKLNiveau"},"KKLNeigung":{"name":"KKLNeigung","description":"Setzen Heizkreis 1: Neigung Kuehlkennlinie (0..35)","polling":"nicht möglich","type":"number","command":"setKKLNeigung"},"Betriebsart":{"name":"Betriebsart","description":"Setze Betriebsart (0..4)","polling":"nicht möglich","type":"string","command":"setBetriebsart"},"Betriebsart0":{"name":"Betriebsart0","description":"Abschaltbetrieb","polling":"nicht möglich","type":"string","command":"setBetriebsart0"},"Betriebsart1":{"name":"Betriebsart1","description":"Warmwasser","polling":"nicht möglich","type":"string","command":"setBetriebsart1"},"Betriebsart2":{"name":"Betriebsart2","description":"Heizen und Warmwasser","polling":"nicht möglich","type":"string","command":"setBetriebsart2"},"1xWWein":{"name":"1xWWein","description":"1 malige Warmwasserbereitung","polling":"nicht möglich","type":"string","command":"set1xWWein"},"1xWWaus":{"name":"1xWWaus","description":"1 malige Warmwasserbereitung","polling":"nicht möglich","type":"string","command":"set1xWWaus"},"HeaterforWW":{"name":"HeaterforWW","description":"Druchlauferhitzer für Warmwasser aktivieren","polling":"nicht möglich","type":"number","command":"setHeaterforWW"},"HeaterforRoomtemp":{"name":"HeaterforRoomtemp","description":"Durchlauferhitzer für Heizung aktivieren","polling":"nicht möglich","type":"number","command":"setHeaterforRoomtemp"},"Heater":{"name":"Heater","description":"Leistung Durchlauferhitzer (1=3, 2=6 oder 3=9kW)","polling":"nicht möglich","type":"number","command":"setHeater"},"Compressor":{"name":"Compressor","description":"Freigabe Verdichterstufe (1=WW 2=Heiz 3=WW+Heiz 15=default)","polling":"nicht möglich","type":"number","command":"setCompressor"},"MinZuluftBypass":{"name":"MinZuluftBypass","description":"Setze Minimale Zulufttemperatur für den ByPass in Grad 0,1 °C","polling":"nicht möglich","type":"number","command":"setMinZuluftBypass"},"AbluftTempSoll":{"name":"AbluftTempSoll","description":"Setze Ablufttemperatur-Sollwert in Grad 0,1 °C","polling":"nicht möglich","type":"number","command":"setAbluftTempSoll"},"VolstromRed":{"name":"VolstromRed","description":"Setze Volumenstrom reduzierte Lüftung in m3 xxx","polling":"nicht möglich","type":"number","command":"setVolstromRed"},"VolstromNormal":{"name":"VolstromNormal","description":"Setze Volumenstrom normale Lüftung in m3 xxx","polling":"nicht möglich","type":"number","command":"setVolstromNormal"},"VolstromIntensiv":{"name":"VolstromIntensiv","description":"Setze Volumenstrom intensive Lüftung in m3 xxx","polling":"nicht möglich","type":"number","command":"setVolstromIntensiv"}},"system":{"-ID":"204D","-name":"V200-S","-protocol":"P300"}}

viessmann.0
2023-03-16 20:09:11.279	info	read vcontrold.xml successfull

viessmann.0
2023-03-16 20:09:11.279	debug	Units in vcontrold.xml: {"UT":{"unit":"°C"},"UTH":{"unit":"°C"},"UN":{"unit":""},"UT1":{"unit":"°C"},"UT1U":{"unit":"°C"},"UTI":{"unit":"°C"},"ST":{"unit":""},"XX":{"unit":""},"COL":{"unit":""},"CO":{"unit":""},"PR":{"unit":"%"},"PR1":{"unit":"%"},"PR2":{"unit":"%"},"PR3":{"unit":"%"},"UCH":{"unit":""},"VS":{"unit":"l/h"},"CS":{"unit":"Stunden"},"JAZ":{"unit":""},"PS":{"unit":"Bar"},"BH":{"unit":"h"}}

viessmann.0
2023-03-16 20:09:11.279	debug	Types in vcontrold.xml: {"UT":{"type":"short"},"UTH":{"type":"short"},"UN":{"type":"short"},"UT1":{"type":"char"},"UT1U":{"type":"uchar"},"UTI":{"type":"uchar"},"ST":{"type":"char"},"XX":{"type":"uchar"},"WW":{"type":"enum"},"COL":{"type":"int"},"CO":{"type":"int"},"PR":{"type":"short"},"PR1":{"type":"uchar"},"PR2":{"type":"uchar"},"PR3":{"type":"uchar"},"UCH":{"type":"uchar"},"VS":{"type":"ushort"},"CS":{"type":"uint"},"CT":{"type":"cycletime"},"RT":{"type":"enum"},"JAZ":{"type":"int"},"BA":{"type":"enum"},"PS":{"type":"short"},"SR":{"type":"enum"},"TI":{"type":"systime"},"DT":{"type":"enum"},"BH":{"type":"uchar"},"BST":{"type":"uchar"},"BST2":{"type":"enum"},"HKT":{"type":"uchar"},"PL":{"type":"short"},"SN":{"type":"uint"},"USV":{"type":"enum"},"BFB":{"type":"uchar"},"ES":{"type":"errstate"}}

viessmann.0
2023-03-16 20:09:11.258	debug	Copy vcontrold.xml from server to host successfully

viessmann.0
2023-03-16 20:09:11.243	debug	Copy vito.xml from server to host successfully

viessmann.0
2023-03-16 20:09:11.221	debug	Try to copy Vito from: /etc/vcontrold/vito.xml to: /opt/iobroker/node_modules/iobroker.viessmann

viessmann.0
2023-03-16 20:09:10.446	debug	FTP session ready

viessmann.0
2023-03-16 20:09:09.735	debug	try to create a ssh session

viessmann.0
2023-03-16 20:09:09.735	debug	try to read xml files

viessmann.0
2023-03-16 20:09:09.721	info	starting. Version 1.4.2 (non-npm: misanorot/ioBroker.viessmann) in /opt/iobroker/node_modules/iobroker.viessmann, node: v18.14.2, js-controller: 4.0.24

viessmann.0
2023-03-16 20:09:09.588	debug	States connected to redis: 127.0.0.1:9000

viessmann.0
2023-03-16 20:09:09.514	debug	States create User PubSub Client

viessmann.0
2023-03-16 20:09:09.514	debug	States create System PubSub Client

viessmann.0
2023-03-16 20:09:09.497	debug	Redis States: Use Redis connection: 127.0.0.1:9000

viessmann.0
2023-03-16 20:09:09.478	debug	Objects connected to redis: 127.0.0.1:9001

viessmann.0
2023-03-16 20:09:09.475	debug	Objects client initialize lua scripts

viessmann.0
2023-03-16 20:09:09.433	debug	Objects create User PubSub Client

viessmann.0
2023-03-16 20:09:09.432	debug	Objects create System PubSub Client

viessmann.0
2023-03-16 20:09:09.432	debug	Objects client ready ... initialize now

viessmann.0
2023-03-16 20:09:09.406	debug	Redis Objects: Use Redis connection: 127.0.0.1:9001