UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[wendy2702]

@michael-pusch sagte in MODBUS.0 Adapter fehlt Master/Slave möglichkeit?:

Function code received in the query is not recognized or allowed by slave

Da steht aber das dein WR den Function Code nicht akzeptiert.

Also entweder register falsch, kein Holding, oder falsche Register Parameter.

[michael.pusch]

@homoran

[wendy2702]

@michael-pusch Das ist nur der Filter.

Debug stellt man in der Instanz ein wo jetzt Info steht.

[michael.pusch]

@wendy2702

thx... naja, bin mit dem ding a ned jeden tag auf du und du ;)
sekunde

[wendy2702]

[michael.pusch]

@wendy2702

modbus.0
	2023-01-25 21:24:26.494	debug	Cleaning up request fifo.
modbus.0
	2023-01-25 21:24:26.493	debug	Clearing timeout of the current request.
modbus.0
	2023-01-25 21:24:26.487	info	Disconnected from slave
modbus.0
	2023-01-25 21:24:26.036	warn	Poll error count: 1 code: "App Timeout"
modbus.0
	2023-01-25 21:24:25.484	error	Cannot write single register [38407]: {"err":"timeout","timeout":5000}
modbus.0
	2023-01-25 21:24:25.483	error	Request timed out.
modbus.0
	2023-01-25 21:24:25.482	warn	Error: undefined
modbus.0
	2023-01-25 21:24:20.836	debug	[DevID_10/inputRegs] Poll address 13568 - 21 registers
modbus.0
	2023-01-25 21:24:20.836	debug	[DevID_10] Poll start ---------------------
modbus.0
	2023-01-25 21:24:20.585	error	Error response: Function code received in the query is not recognized or allowed by slave
modbus.0
	2023-01-25 21:24:20.584	error	Error response for FCx6: Illegal Function
modbus.0
	2023-01-25 21:24:20.473	debug	state Changed ack=false: modbus.0.holdingRegisters.38407_PV_System_LadeStatus: {"val":1,"ack":false,"ts":1674678260467,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1674678260467}
modbus.0
	2023-01-25 21:24:19.783	debug	[DevID_10/holdingRegs] Poll address 38407 DONE
modbus.0
	2023-01-25 21:24:19.697	debug	[DevID_10/holdingRegs] Poll address 38407 - 1 registers
modbus.0
	2023-01-25 21:24:19.689	debug	[DevID_10/inputRegs/13697] Calculation result = 0.84, type = number
modbus.0
	2023-01-25 21:24:19.689	debug	[DevID_10/inputRegs/13697] Formula = x / 100
modbus.0
	2023-01-25 21:24:19.689	debug	[DevID_10/inputRegs/13697] Input Value = 84
modbus.0
	2023-01-25 21:24:19.688	debug	[DevID_10/inputRegs/13696] Calculation result = 56.87, type = number
modbus.0
	2023-01-25 21:24:19.688	debug	[DevID_10/inputRegs/13696] Formula = x / 100
modbus.0
	2023-01-25 21:24:19.688	debug	[DevID_10/inputRegs/13696] Input Value = 5687
modbus.0
	2023-01-25 21:24:19.687	debug	[DevID_10/inputRegs] Poll address 13696 DONE
modbus.0
	2023-01-25 21:24:19.599	debug	[DevID_10/inputRegs] Poll address 13696 - 7 registers
modbus.0
	2023-01-25 21:24:19.595	debug	[DevID_10/inputRegs/13655] Calculation result = 211.15, type = number
modbus.0
	2023-01-25 21:24:19.592	debug	[DevID_10/inputRegs/13655] Formula = x / 100
modbus.0
	2023-01-25 21:24:19.592	debug	[DevID_10/inputRegs/13655] Input Value = 21115
modbus.0
	2023-01-25 21:24:19.591	debug	[DevID_10/inputRegs] Poll address 13655 DONE
modbus.0
	2023-01-25 21:24:19.501	debug	[DevID_10/inputRegs] Poll address 13655 - 1 registers
modbus.0
	2023-01-25 21:24:19.499	debug	[DevID_10/inputRegs/13643] Calculation result = 0, type = number
modbus.0
	2023-01-25 21:24:19.498	debug	[DevID_10/inputRegs/13643] Formula = x / 100
modbus.0
	2023-01-25 21:24:19.498	debug	[DevID_10/inputRegs/13643] Input Value = 0
modbus.0
	2023-01-25 21:24:19.498	debug	[DevID_10/inputRegs/13642] Calculation result = 0, type = number
modbus.0
	2023-01-25 21:24:19.497	debug	[DevID_10/inputRegs/13642] Formula = x / 100

[michael.pusch]

@wendy2702 sagte in MODBUS.0 Adapter fehlt Master/Slave möglichkeit?:

@michael-pusch sagte in MODBUS.0 Adapter fehlt Master/Slave möglichkeit?:

Function code received in the query is not recognized or allowed by slave

Da steht aber das dein WR den Function Code nicht akzeptiert.

Also entweder register falsch, kein Holding, oder falsche Register Parameter.

Laut Hex müsste die Adresse dann 38407 lauten...

es geht um die Zeile C8

[wendy2702]

@wendy2702 sagte in MODBUS.0 Adapter fehlt Master/Slave möglichkeit?:

@michael-pusch sagte in MODBUS.0 Adapter fehlt Master/Slave möglichkeit?:

Function code received in the query is not recognized or allowed by slave

Da steht aber das dein WR den Function Code nicht akzeptiert.

Also entweder register falsch, kein Holding, oder falsche Register Parameter.

Ich zitiere mich selber.

[Glasfaser]

@michael-pusch

Write ist Holding Register

[michael.pusch]

@glasfaser

liegt ja dort

[wendy2702]

0x10 ist Function Code 16

[FC16](Link Adresse)

Setze mal den haken

[Glasfaser]

@michael-pusch

dann gehe ein Register am ende +1 / oder -1

Was ist dann

38408
38406

[michael.pusch]

@wendy2702 sagte in MODBUS.0 Adapter fehlt Master/Slave möglichkeit?:

Function Code 16

Setze mal den haken

Ich "glaube" es funktioniert jetzt... Hakerl gesetzt, obwohl ich das hakerl setzen in anderen versuchen definitiv zwar schon mal gemacht hatte, aber jetzt dürfte es funktionieren. Hat sicher auch mit der "Mehrere ID´s" problematik zu tun gehabt...

Wenn ich am Datenpunkt manuell nun 2 eingebe soll er PV bevorzugen, wenn das nicht reicht soll er mit EVU, also Netz nachschiessen.
Wenn ich das eingebe, springt der Accu auf Standby da er voll ist und der Strom aus dem EVU Netz wird verwendet.

Wenn ich den Datenpunkt jetzt mit 1 belege, soll er nur PV nehmen... da das jetzt in der Nacht natürlich nicht reicht, springt der Accu an und geht von Standby auf Entladend.. sprich, er spricht mir den Datenpunkt im Hybridwechselrichter anscheinend definitv an und stellt mir diesen um!

Ich darf nur nicht "Bestätigt" anhängen, dann kommt und passiert auch nix !

Leute DANKE DANKE DANKE... !!!

[wendy2702]

@michael-pusch Was kommt denn im Debug log wenn du den Wert schreibst?

Und wenn es funktioniert, bitte den ersten Beitrag editieren und ein [Gelöst] vor den Titel setzen

[michael.pusch]

@wendy2702

modbus.0
	2023-01-25 22:05:31.032	debug	[DevID_10/holdingRegs] Poll address 38407 DONE
modbus.0
	2023-01-25 22:05:30.939	debug	[DevID_10/holdingRegs] Poll address 38407 - 1 registers
modbus.0
	2023-01-25 22:05:30.938	debug	[DevID_10/inputRegs/13697] Calculation result = 0.56, type = number
modbus.0
	2023-01-25 22:05:30.937	debug	[DevID_10/inputRegs/13697] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.937	debug	[DevID_10/inputRegs/13697] Input Value = 56
modbus.0
	2023-01-25 22:05:30.937	debug	[DevID_10/inputRegs/13696] Calculation result = 56.91, type = number
modbus.0
	2023-01-25 22:05:30.937	debug	[DevID_10/inputRegs/13696] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.937	debug	[DevID_10/inputRegs/13696] Input Value = 5691
modbus.0
	2023-01-25 22:05:30.936	debug	[DevID_10/inputRegs] Poll address 13696 DONE
modbus.0
	2023-01-25 22:05:30.843	debug	[DevID_10/inputRegs] Poll address 13696 - 7 registers
modbus.0
	2023-01-25 22:05:30.841	debug	[DevID_10/inputRegs/13655] Calculation result = 211.15, type = number
modbus.0
	2023-01-25 22:05:30.841	debug	[DevID_10/inputRegs/13655] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.841	debug	[DevID_10/inputRegs/13655] Input Value = 21115
modbus.0
	2023-01-25 22:05:30.840	debug	[DevID_10/inputRegs] Poll address 13655 DONE
modbus.0
	2023-01-25 22:05:30.746	debug	[DevID_10/inputRegs] Poll address 13655 - 1 registers
modbus.0
	2023-01-25 22:05:30.745	debug	[DevID_10/inputRegs/13643] Calculation result = 0, type = number
modbus.0
	2023-01-25 22:05:30.745	debug	[DevID_10/inputRegs/13643] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.745	debug	[DevID_10/inputRegs/13643] Input Value = 0
modbus.0
	2023-01-25 22:05:30.745	debug	[DevID_10/inputRegs/13642] Calculation result = 0, type = number
modbus.0
	2023-01-25 22:05:30.745	debug	[DevID_10/inputRegs/13642] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.745	debug	[DevID_10/inputRegs/13642] Input Value = 0
modbus.0
	2023-01-25 22:05:30.745	debug	[DevID_10/inputRegs/13641] Calculation result = 0, type = number
modbus.0
	2023-01-25 22:05:30.744	debug	[DevID_10/inputRegs/13641] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.744	debug	[DevID_10/inputRegs/13641] Input Value = 0
modbus.0
	2023-01-25 22:05:30.744	debug	[DevID_10/inputRegs] Poll address 13641 DONE
modbus.0
	2023-01-25 22:05:30.634	debug	[DevID_10/inputRegs] Poll address 13641 - 3 registers
modbus.0
	2023-01-25 22:05:30.633	debug	[DevID_10/inputRegs/13616] Calculation result = -302.46, type = number
modbus.0
	2023-01-25 22:05:30.633	debug	[DevID_10/inputRegs/13616] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.633	debug	[DevID_10/inputRegs/13616] Input Value = -30246
modbus.0
	2023-01-25 22:05:30.632	debug	[DevID_10/inputRegs] Poll address 13616 DONE
modbus.0
	2023-01-25 22:05:30.538	debug	[DevID_10/inputRegs] Poll address 13616 - 1 registers
modbus.0
	2023-01-25 22:05:30.537	debug	[DevID_10/inputRegs/13602] Calculation result = 0.36, type = number
modbus.0
	2023-01-25 22:05:30.537	debug	[DevID_10/inputRegs/13602] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.537	debug	[DevID_10/inputRegs/13602] Input Value = 36
modbus.0
	2023-01-25 22:05:30.537	debug	[DevID_10/inputRegs/13601] Calculation result = 232.41, type = number
modbus.0
	2023-01-25 22:05:30.537	debug	[DevID_10/inputRegs/13601] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.536	debug	[DevID_10/inputRegs/13601] Input Value = 23241
modbus.0
	2023-01-25 22:05:30.536	debug	[DevID_10/inputRegs] Poll address 13601 DONE
modbus.0
	2023-01-25 22:05:30.447	debug	[DevID_10/inputRegs] Poll address 13601 - 2 registers
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13588] Calculation result = 26, type = number
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13588] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13588] Input Value = 2600
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13587] Calculation result = 24, type = number
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13587] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13587] Input Value = 2400
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13586] Calculation result = 12, type = number
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13586] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13586] Input Value = 1200
modbus.0
	2023-01-25 22:05:30.442	debug	[DevID_10/inputRegs/13583] Calculation result = 120.34, type = number
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13583] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13583] Input Value = 12034
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13572] Calculation result = 50, type = number
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13572] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13572] Input Value = 5000
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13570] Calculation result = 31.86, type = number
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13570] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13570] Input Value = 3186
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13568] Calculation result = 232.41, type = number
modbus.0
	2023-01-25 22:05:30.441	debug	[DevID_10/inputRegs/13568] Formula = x / 100
modbus.0
	2023-01-25 22:05:30.440	debug	[DevID_10/inputRegs/13568] Input Value = 23241
modbus.0
	2023-01-25 22:05:30.440	debug	[DevID_10/inputRegs] Poll address 13568 DONE
modbus.0
	2023-01-25 22:05:30.388	debug	[DevID_10/inputRegs] Poll address 13568 - 21 registers
modbus.0
	2023-01-25 22:05:30.388	debug	[DevID_10] Poll start ---------------------
modbus.0
	2023-01-25 22:05:29.337	debug	[DevID_10/holdingRegs] Poll address 38407 DONE
modbus.0
	2023-01-25 22:05:29.242	debug	[DevID_10/holdingRegs] Poll address 38407 - 1 registers
modbus.0
	2023-01-25 22:05:29.241	debug	[DevID_10/inputRegs/13697] Calculation result = 0.56, type = number
modbus.0
	2023-01-25 22:05:29.241	debug	[DevID_10/inputRegs/13697] Formula = x / 100
modbus.0
	2023-01-25 22:05:29.241	debug	[DevID_10/inputRegs/13697] Input Value = 56

muss man suchen, 38407

[wendy2702]

@michael-pusch sagte in MODBUS.0 Adapter fehlt Master/Slave möglichkeit?:

2023-01-25 22:05:31.032 debug [DevID_10/holdingRegs] Poll address 38407 DONE

Zumindest kein Reject.

Sieht also erst mal gut aus.

[michael.pusch]

@wendy2702
@Glasfaser
@Homoran

Danke !

Werd das im Auge behalten, ist aber dermassen MÄCHTIG die gesamte ioBroker umgebung und die meisten User wissen das garnicht zu schätzen was ich hier immer wieder lesen muss...!
Und ihr steckt da so viel Zeit, Geld und Nerven trotzdem noch immer in das Projekt...

Danke nochmals und Hut ab !!!!