[Frage] Smartmeter D0 - Itron ACE3000 Typ260 antwortet nicht

Alfonz_Ritzek

Grüße,
Ich hab einen ITRON Ace3000 Typ 260 Stromzähler und den IR Lesekopf von Udo.

Ich habe das Testscript von Volkszähler zum testen genommen. Damit bekomme ich auch die Richtigen werte.

#!/bin/bash

# Itron ACE3000 Typ260
# einfach auslesen
# nach Idee von https://wiki.volkszaehler.org/hardware/channels/meters/power/edl-ehz/itron_ace3000_type_260 --> BASH

# Init ttyUSBx  / 300 baud 7 E 1
stty -F /dev/ttyUSB0 1:4:da7:a30:3:1c:7f:15:4:10:0:0:11:13:1a:0:12:f:17:16:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0

## send request
( sleep 1 ; echo -e "\x2f\x3f\x21\x0d\x0a" > /dev/ttyUSB0 ) &

while read -t8 line                                         # warten auf die Zaehlerausgabe
do                                                          # Bestaetigung nach dem Wecken nicht notwendig
  [[ "$line" =~ "1.8.0" ]] && Z1=${line:6:8}                # Wert fuer Bezug
  [[ "$line" =~ "2.8.0" ]] && Z2=${line:6:8}                # Wert fuer Einspeisung
done < /dev/ttyUSB0


length1=${#Z1}
length2=${#Z2}

#printf '{"Strom": {"incoming":'$Z1', "outgoing":'$Z2'} }'
#check if there is an value read
if [[ $length1 -eq 8 ]] && [[ $length2 -eq 8 ]] 
then
  printf $Z1', '$Z2
fi

im Smartmeter habe ich dann folgende Daten eingestellt

ich bekomme aber keine Daten

Kann mir jemand sagen was da genau falsch läuft?

klassisch

@alfonz_ritzek Nur der Vollständigkeit halber weil äußerst beliebter Fehler: die USB Schnittstelle kann nur von einem einzigen Programm gleichzeitig "besetzt" werden. Wenn vorher ein anderes Programm den USB besetzt hat, kann ioBroker nicht mehr darauf zugreifen.
Also neu booten und außer ioBroker nichts starten. Geht es dann?

Alfonz_Ritzek

@klassisch Raspberry Pi neugestartet und behalte die Fehlermeldung.

klassisch

@alfonz_ritzek Dann Adapter bitte auf loglevel "debug" stellen.
Ausgabe nach dem Start des Adapters hier in code Tags posten.
Und warten bis jemand vorbei kommt (z.B. @apollon77 ), der sich mit D0 und den voranzustellenden Zeichen auskennt oder @Ralla66 , der lt. Suche solch einen Zähler betreibt.
Sorry, habe selbst keinen D0 Zähler und kenne mich nicht damit aus.
Vielleicht in den Titel noch D0 mit aufnehmen.

Alfonz_Ritzek

@klassisch

Wird gemacht

2023-01-06 16:56:56.701 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 (force=false, process=true)
2023-01-06 16:56:56.715 - silly: smartmeter.0 (11988) States system redis pmessage system.adapter.smartmeter.0.sigKill/system.adapter.smartmeter.0.sigKill:{"val":-1,"ack":false,"ts":1673020616710,"q":0,"from":"system.host.raspberrypi","lc":1673020616710}
2023-01-06 16:56:56.717 - info: host.raspberrypi stopInstance system.adapter.smartmeter.0 send kill signal
2023-01-06 16:56:56.717 - info: smartmeter.0 (11988) Got terminate signal TERMINATE_YOURSELF
2023-01-06 16:56:56.723 - info: smartmeter.0 (11988) terminating
2023-01-06 16:56:56.727 - debug: smartmeter.0 (11988) Plugin sentry destroyed
2023-01-06 16:56:56.728 - info: smartmeter.0 (11988) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-01-06 16:56:57.399 - info: host.raspberrypi instance system.adapter.smartmeter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-01-06 16:56:59.949 - info: host.raspberrypi instance system.adapter.smartmeter.0 started with pid 15750
2023-01-06 16:57:03.278 - debug: smartmeter.0 (15750) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-01-06 16:57:03.394 - debug: smartmeter.0 (15750) Objects client ready ... initialize now
2023-01-06 16:57:03.398 - debug: smartmeter.0 (15750) Objects create System PubSub Client
2023-01-06 16:57:03.401 - debug: smartmeter.0 (15750) Objects create User PubSub Client
2023-01-06 16:57:03.622 - debug: smartmeter.0 (15750) Objects client initialize lua scripts
2023-01-06 16:57:03.636 - debug: smartmeter.0 (15750) Objects connected to redis: 127.0.0.1:9001
2023-01-06 16:57:03.752 - debug: smartmeter.0 (15750) Redis States: Use Redis connection: 127.0.0.1:9000
2023-01-06 16:57:03.838 - debug: smartmeter.0 (15750) States create System PubSub Client
2023-01-06 16:57:03.841 - debug: smartmeter.0 (15750) States create User PubSub Client
2023-01-06 16:57:03.998 - debug: smartmeter.0 (15750) States connected to redis: 127.0.0.1:9000
2023-01-06 16:57:04.321 - debug: smartmeter.0 (15750) Plugin sentry Initialize Plugin (enabled=true)
2023-01-06 16:57:05.068 - info: smartmeter.0 (15750) starting. Version 3.3.4 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v16.16.0, js-controller: 4.0.24
2023-01-06 16:57:05.126 - debug: smartmeter.0 (15750) SmartmeterObis options: {"debug":2,"protocol":"D0Protocol","transport":"SerialResponseTransport","requestInterval":"15","anotherQueryDelay":"1000","transportSerialPort":"/dev/serial/by-id/usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_00F2F66C-if00-port0","transportSerialBaudrate":300,"transportSerialDataBits":7,"transportSerialStopBits":1,"transportSerialParity":"even","transportSerialMessageTimeout":null,"protocolD0WakeupCharacters":0,"protocolD0SignOnMessage":"\\?! CR LF","protocolD0BaudrateChangeoverOverwrite":300,"obisFallbackMedium":1}
2023-01-06 16:57:05.132 - debug: smartmeter.0 (15750) CREATE SERIALPORT: 300 7 1 even
2023-01-06 16:57:05.147 - debug: smartmeter.0 (15750) SERIALPORT OPEN
2023-01-06 16:57:05.183 - debug: smartmeter.0 (15750) SET MESSAGE TIMEOUT TIMER: 120000
2023-01-06 16:57:05.209 - debug: smartmeter.0 (15750) connected set to false
2023-01-06 16:57:06.041 - debug: smartmeter.0 (15750) ADD NEW DATA (0 + NEW 1)
2023-01-06 16:57:06.044 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:06.045 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:09.344 - debug: smartmeter.0 (15750) ADD NEW DATA (1 + NEW 1)
2023-01-06 16:57:09.346 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:09.347 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:12.597 - debug: smartmeter.0 (15750) ADD NEW DATA (2 + NEW 1)
2023-01-06 16:57:12.598 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:12.599 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:15.867 - debug: smartmeter.0 (15750) ADD NEW DATA (3 + NEW 1)
2023-01-06 16:57:15.869 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:15.871 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:19.201 - debug: smartmeter.0 (15750) ADD NEW DATA (4 + NEW 1)
2023-01-06 16:57:19.203 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:19.204 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:22.519 - debug: smartmeter.0 (15750) ADD NEW DATA (5 + NEW 1)
2023-01-06 16:57:22.521 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:22.522 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:25.827 - debug: smartmeter.0 (15750) ADD NEW DATA (6 + NEW 1)
2023-01-06 16:57:25.828 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:25.829 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:29.108 - debug: smartmeter.0 (15750) ADD NEW DATA (7 + NEW 1)
2023-01-06 16:57:29.109 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:29.110 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:32.396 - debug: smartmeter.0 (15750) ADD NEW DATA (8 + NEW 1)
2023-01-06 16:57:32.397 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:32.398 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:35.695 - debug: smartmeter.0 (15750) ADD NEW DATA (9 + NEW 1)
2023-01-06 16:57:35.696 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:35.697 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:38.957 - debug: smartmeter.0 (15750) ADD NEW DATA (10 + NEW 1)
2023-01-06 16:57:38.958 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:38.960 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:42.286 - debug: smartmeter.0 (15750) ADD NEW DATA (11 + NEW 1)
2023-01-06 16:57:42.288 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:42.289 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:45.616 - debug: smartmeter.0 (15750) ADD NEW DATA (12 + NEW 1)
2023-01-06 16:57:45.618 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:45.619 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:48.941 - debug: smartmeter.0 (15750) ADD NEW DATA (13 + NEW 1)
2023-01-06 16:57:48.943 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:48.945 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:52.262 - debug: smartmeter.0 (15750) ADD NEW DATA (14 + NEW 1)
2023-01-06 16:57:52.263 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:52.264 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:55.590 - debug: smartmeter.0 (15750) ADD NEW DATA (15 + NEW 1)
2023-01-06 16:57:55.594 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:55.595 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:57:58.914 - debug: smartmeter.0 (15750) ADD NEW DATA (16 + NEW 1)
2023-01-06 16:57:58.915 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:57:58.915 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:02.196 - debug: smartmeter.0 (15750) ADD NEW DATA (17 + NEW 1)
2023-01-06 16:58:02.197 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:02.198 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:05.460 - debug: smartmeter.0 (15750) ADD NEW DATA (18 + NEW 1)
2023-01-06 16:58:05.461 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:05.462 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:08.729 - debug: smartmeter.0 (15750) ADD NEW DATA (19 + NEW 1)
2023-01-06 16:58:08.731 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:08.731 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:12.034 - debug: smartmeter.0 (15750) ADD NEW DATA (20 + NEW 1)
2023-01-06 16:58:12.035 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:12.035 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:15.363 - debug: smartmeter.0 (15750) ADD NEW DATA (21 + NEW 1)
2023-01-06 16:58:15.365 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:15.366 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:18.716 - debug: smartmeter.0 (15750) ADD NEW DATA (22 + NEW 1)
2023-01-06 16:58:18.717 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:18.717 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:22.033 - debug: smartmeter.0 (15750) ADD NEW DATA (23 + NEW 1)
2023-01-06 16:58:22.034 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:22.035 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:25.352 - debug: smartmeter.0 (15750) ADD NEW DATA (24 + NEW 1)
2023-01-06 16:58:25.354 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:25.355 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:28.670 - debug: smartmeter.0 (15750) ADD NEW DATA (25 + NEW 1)
2023-01-06 16:58:28.672 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:28.674 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:31.998 - debug: smartmeter.0 (15750) ADD NEW DATA (26 + NEW 1)
2023-01-06 16:58:31.999 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:32.001 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:35.338 - debug: smartmeter.0 (15750) ADD NEW DATA (27 + NEW 1)
2023-01-06 16:58:35.340 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:35.341 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:38.583 - debug: smartmeter.0 (15750) ADD NEW DATA (28 + NEW 1)
2023-01-06 16:58:38.584 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:38.585 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:41.912 - debug: smartmeter.0 (15750) ADD NEW DATA (29 + NEW 1)
2023-01-06 16:58:41.913 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:41.914 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:45.241 - debug: smartmeter.0 (15750) ADD NEW DATA (30 + NEW 1)
2023-01-06 16:58:45.243 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:45.244 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:48.556 - debug: smartmeter.0 (15750) ADD NEW DATA (31 + NEW 1)
2023-01-06 16:58:48.557 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:48.559 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:55.198 - debug: smartmeter.0 (15750) ADD NEW DATA (32 + NEW 1)
2023-01-06 16:58:55.199 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:55.200 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:58:58.496 - debug: smartmeter.0 (15750) ADD NEW DATA (33 + NEW 1)
2023-01-06 16:58:58.497 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:58:58.498 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:59:01.817 - debug: smartmeter.0 (15750) ADD NEW DATA (34 + NEW 1)
2023-01-06 16:59:01.818 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:59:01.819 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:59:05.139 - debug: smartmeter.0 (15750) ADD NEW DATA (35 + NEW 1)
2023-01-06 16:59:05.141 - debug: smartmeter.0 (15750) CURRENT PROCESS STEP 0 IN CHECKMESSAGE
2023-01-06 16:59:05.141 - debug: smartmeter.0 (15750) MATCH-RESULT SIGNON: "" -> null
2023-01-06 16:59:05.186 - debug: smartmeter.0 (15750) MESSAGE TIMEOUT TRIGGERED
2023-01-06 16:59:05.187 - debug: smartmeter.0 (15750) Error: No or too long answer from Serial Device after last request.
2023-01-06 16:59:05.190 - warn: smartmeter.0 (15750) No or too long answer from Serial Device after last request.
2023-01-06 16:59:05.191 - debug: smartmeter.0 (15750) Error: No or too long answer from Serial Device after last request.
2023-01-06 16:59:05.192 - debug: smartmeter.0 (15750) Transport Reset!! Restart = true
2023-01-06 16:59:05.207 - debug: smartmeter.0 (15750) SERIALPORT CLOSE
2023-01-06 16:59:05.209 - debug: smartmeter.0 (15750) SCHEDULE NEXT RUN IN 15s

wenn ich von D0 auf Smart Meter language umstelle bekommt man werte herraus

2023-01-06 17:45:47.362 - info: host.raspberrypi "system.adapter.smartmeter.0" enabled
2023-01-06 17:45:47.714 - info: host.raspberrypi instance system.adapter.smartmeter.0 started with pid 17397
2023-01-06 17:45:51.251 - debug: smartmeter.0 (17397) Redis Objects: Use Redis connection: 127.0.0.1:9001
2023-01-06 17:45:51.367 - debug: smartmeter.0 (17397) Objects client ready ... initialize now
2023-01-06 17:45:51.372 - debug: smartmeter.0 (17397) Objects create System PubSub Client
2023-01-06 17:45:51.374 - debug: smartmeter.0 (17397) Objects create User PubSub Client
2023-01-06 17:45:51.628 - debug: smartmeter.0 (17397) Objects client initialize lua scripts
2023-01-06 17:45:51.649 - debug: smartmeter.0 (17397) Objects connected to redis: 127.0.0.1:9001
2023-01-06 17:45:51.769 - debug: smartmeter.0 (17397) Redis States: Use Redis connection: 127.0.0.1:9000
2023-01-06 17:45:51.824 - debug: smartmeter.0 (17397) States create System PubSub Client
2023-01-06 17:45:51.827 - debug: smartmeter.0 (17397) States create User PubSub Client
2023-01-06 17:45:51.925 - debug: smartmeter.0 (17397) States connected to redis: 127.0.0.1:9000
2023-01-06 17:45:52.170 - debug: smartmeter.0 (17397) Plugin sentry Initialize Plugin (enabled=true)
2023-01-06 17:45:52.893 - info: smartmeter.0 (17397) starting. Version 3.3.4 in /opt/iobroker/node_modules/iobroker.smartmeter, node: v16.16.0, js-controller: 4.0.24
2023-01-06 17:45:52.952 - debug: smartmeter.0 (17397) SmartmeterObis options: {"debug":2,"protocol":"SmlProtocol","transport":"SerialResponseTransport","requestInterval":"15","anotherQueryDelay":"1000","transportSerialPort":"/dev/serial/by-id/usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_00F2F66C-if00-port0","transportSerialBaudrate":300,"transportSerialDataBits":7,"transportSerialStopBits":1,"transportSerialParity":"even","transportSerialMessageTimeout":null,"protocolSmlIgnoreInvalidCRC":false,"obisFallbackMedium":1}
2023-01-06 17:45:52.957 - debug: smartmeter.0 (17397) CREATE SERIALPORT: 300 7 1 even
2023-01-06 17:45:53.000 - debug: smartmeter.0 (17397) SERIALPORT OPEN
2023-01-06 17:45:53.014 - debug: smartmeter.0 (17397) SET MESSAGE TIMEOUT TIMER: 120000
2023-01-06 17:45:53.033 - debug: smartmeter.0 (17397) connected set to false
2023-01-06 17:45:53.962 - debug: smartmeter.0 (17397) ADD NEW DATA (0 + NEW 1)
2023-01-06 17:45:53.968 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f" -> null
2023-01-06 17:45:57.361 - debug: smartmeter.0 (17397) ADD NEW DATA (1 + NEW 1)
2023-01-06 17:45:57.364 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f" -> null
2023-01-06 17:46:00.759 - debug: smartmeter.0 (17397) ADD NEW DATA (2 + NEW 1)
2023-01-06 17:46:00.761 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f" -> null
2023-01-06 17:46:04.191 - debug: smartmeter.0 (17397) ADD NEW DATA (3 + NEW 1)
2023-01-06 17:46:04.193 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f" -> null
2023-01-06 17:46:07.641 - debug: smartmeter.0 (17397) ADD NEW DATA (4 + NEW 1)
2023-01-06 17:46:07.642 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f" -> null
2023-01-06 17:46:11.082 - debug: smartmeter.0 (17397) ADD NEW DATA (5 + NEW 1)
2023-01-06 17:46:11.084 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f" -> null
2023-01-06 17:46:14.534 - debug: smartmeter.0 (17397) ADD NEW DATA (6 + NEW 1)
2023-01-06 17:46:14.535 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:17.980 - debug: smartmeter.0 (17397) ADD NEW DATA (7 + NEW 1)
2023-01-06 17:46:17.983 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:21.446 - debug: smartmeter.0 (17397) ADD NEW DATA (8 + NEW 1)
2023-01-06 17:46:21.447 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:24.879 - debug: smartmeter.0 (17397) ADD NEW DATA (9 + NEW 1)
2023-01-06 17:46:24.882 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:28.312 - debug: smartmeter.0 (17397) ADD NEW DATA (10 + NEW 1)
2023-01-06 17:46:28.314 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:31.700 - debug: smartmeter.0 (17397) ADD NEW DATA (11 + NEW 1)
2023-01-06 17:46:31.702 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:35.118 - debug: smartmeter.0 (17397) ADD NEW DATA (12 + NEW 1)
2023-01-06 17:46:35.119 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:38.558 - debug: smartmeter.0 (17397) ADD NEW DATA (13 + NEW 1)
2023-01-06 17:46:38.559 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:41.988 - debug: smartmeter.0 (17397) ADD NEW DATA (14 + NEW 1)
2023-01-06 17:46:41.989 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:45.432 - debug: smartmeter.0 (17397) ADD NEW DATA (15 + NEW 1)
2023-01-06 17:46:45.434 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:48.876 - debug: smartmeter.0 (17397) ADD NEW DATA (16 + NEW 1)
2023-01-06 17:46:48.878 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:52.314 - debug: smartmeter.0 (17397) ADD NEW DATA (17 + NEW 1)
2023-01-06 17:46:52.316 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:55.763 - debug: smartmeter.0 (17397) ADD NEW DATA (18 + NEW 1)
2023-01-06 17:46:55.764 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:46:59.217 - debug: smartmeter.0 (17397) ADD NEW DATA (19 + NEW 1)
2023-01-06 17:46:59.218 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:02.676 - debug: smartmeter.0 (17397) ADD NEW DATA (20 + NEW 1)
2023-01-06 17:47:02.678 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:06.151 - debug: smartmeter.0 (17397) ADD NEW DATA (21 + NEW 1)
2023-01-06 17:47:06.153 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:09.600 - debug: smartmeter.0 (17397) ADD NEW DATA (22 + NEW 1)
2023-01-06 17:47:09.602 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:13.060 - debug: smartmeter.0 (17397) ADD NEW DATA (23 + NEW 1)
2023-01-06 17:47:13.061 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:16.527 - debug: smartmeter.0 (17397) ADD NEW DATA (24 + NEW 1)
2023-01-06 17:47:16.528 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:20.001 - debug: smartmeter.0 (17397) ADD NEW DATA (25 + NEW 1)
2023-01-06 17:47:20.002 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:23.455 - debug: smartmeter.0 (17397) ADD NEW DATA (26 + NEW 1)
2023-01-06 17:47:23.457 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:26.910 - debug: smartmeter.0 (17397) ADD NEW DATA (27 + NEW 1)
2023-01-06 17:47:26.911 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:30.310 - debug: smartmeter.0 (17397) ADD NEW DATA (28 + NEW 1)
2023-01-06 17:47:30.311 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:33.740 - debug: smartmeter.0 (17397) ADD NEW DATA (29 + NEW 1)
2023-01-06 17:47:33.742 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:37.200 - debug: smartmeter.0 (17397) ADD NEW DATA (30 + NEW 1)
2023-01-06 17:47:37.202 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:40.635 - debug: smartmeter.0 (17397) ADD NEW DATA (31 + NEW 1)
2023-01-06 17:47:40.636 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:44.100 - debug: smartmeter.0 (17397) ADD NEW DATA (32 + NEW 1)
2023-01-06 17:47:44.101 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:47.516 - debug: smartmeter.0 (17397) ADD NEW DATA (33 + NEW 1)
2023-01-06 17:47:47.517 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:50.974 - debug: smartmeter.0 (17397) ADD NEW DATA (34 + NEW 1)
2023-01-06 17:47:50.975 - debug: smartmeter.0 (17397) MATCH-RESULT MESSAGE: "7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f7f" -> null
2023-01-06 17:47:53.016 - debug: smartmeter.0 (17397) MESSAGE TIMEOUT TRIGGERED
2023-01-06 17:47:53.017 - debug: smartmeter.0 (17397) Error: No or too long answer from Serial Device after last request.
2023-01-06 17:47:53.020 - warn: smartmeter.0 (17397) No or too long answer from Serial Device after last request.
2023-01-06 17:47:53.020 - debug: smartmeter.0 (17397) Error: No or too long answer from Serial Device after last request.
2023-01-06 17:47:53.021 - debug: smartmeter.0 (17397) Transport Reset!! Restart = true
2023-01-06 17:47:53.029 - debug: smartmeter.0 (17397) SERIALPORT CLOSE
2023-01-06 17:47:53.031 - debug: smartmeter.0 (17397) SCHEDULE NEXT RUN IN 15s

Ceel

Das sind meine Einstellungen

Screenshot_2023-01-06-19-44-57-324-edit_com.android.chrome.jpg

wendy2702

Mal hier geschaut bzw. die Suche bemüht:

https://forum.iobroker.net/topic/4685/adapter-smartmeter/3030

Homoran

@alfonz_ritzek sagte in [Frage] Smartmeter D0 - Itron ACE3000 Typ260 antwortet nicht:

Ich habe das Testscript von Volkszähler zum testen genommen. Damit bekomme ich auch die Richtigen werte.

das ist Fehlerquelle No. 1!
bitte rebooten!

Vorher bitte signon keer kassen. die schickt der Adapter bereits
Was sonst noch leer bleiben muss vergesse ich beinD0 immer wieder.

apollon77

@alfonz_ritzek bitte immer zuerst mit den Standardeinstellungen testen und nur da ändern wo es dann sinnvoll ist. Die anfrage mit /?! Ist Standard und daher das was du da reingeschrieben hast wieder rauswerfen bitte.

Die Hauptursache das es nicht geht ist wildes ändern von Einstellungen weil man denkt es hilft. Einfach lassen. Die Standard Einstellungen wenn man richtiges Format und seriellen Typ wählt passen zu 9x% einfach.

Also am besten instanz löschen und neu anlegen und default. Dann log damit bitte.

Alfonz_Ritzek

@ceel said in [Frage] Smartmeter D0 - Itron ACE3000 Typ260 antwortet nicht:

Das sind meine Einstellungen

mit den Einstellungen läuft es

apollon77

@alfonz_ritzek warum braucht man das überschreiben des d0 Modus und baudrate changeover? Wird an sich immer automatisch erkannt.

NEWS

[Frage] Smartmeter D0 - Itron ACE3000 Typ260 antwortet nicht

Support us

1.1k
Online

31.1k
Users

78.2k
Topics

1.2m
Posts

NEWS

[Frage] Smartmeter D0 - Itron ACE3000 Typ260 antwortet nicht

Support us

1.1kOnline

31.1kUsers

78.2kTopics

1.2mPosts

1.1k
Online

31.1k
Users

78.2k
Topics

1.2m
Posts