NEWS
Admin startet nicht mehr
ioBroker Allgemein
111
Beiträge
9
Kommentatoren
12.8k
Aufrufe
8
Watching
-
@phoenixcr wenn es so bleibt, sollte auch nichts abstürzen.
wieder aus :face_palm:
top - 14:11:53 up 7:29, 1 user, load average: 1.54, 0.90, 0.64 Tasks: 168 total, 6 running, 162 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.4 us, 3.3 sy, 0.0 ni, 91.4 id, 0.3 wa, 0.0 hi, 0.7 si, 0.0 st MiB Mem : 7897.9 total, 4814.5 free, 1622.8 used, 1460.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 6402.4 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12707 iobroker 20 0 317684 197820 31240 R 7.9 2.4 51:10.70 iobroker.js-con 13917 iobroker 20 0 188504 72572 31144 S 6.6 0.9 7:22.64 io.ds18b20.0 12749 iobroker 20 0 207932 92456 30960 R 5.3 1.1 14:17.62 io.influxdb.0 724 influxdb 20 0 1145204 141052 28568 S 3.6 1.7 19:10.58 influxd 12985 iobroker 20 0 205832 97900 36008 R 1.7 1.2 12:43.68 io.jarvis.0 16633 iobroker 20 0 194864 79508 31092 R 1.7 1.0 1:55.75 io.modbus.0 12726 iobroker 20 0 397608 208948 36536 S 1.3 2.6 2:54.47 io.admin.0 12768 iobroker 20 0 248732 139212 35984 S 1.3 1.7 9:21.69 io.javascript.0 135 root 20 0 86752 38788 37948 S 1.0 0.5 1:21.27 systemd-journal 12798 iobroker 20 0 261968 150776 36784 S 1.0 1.9 10:56.55 node-red 4282 root 20 0 0 0 0 I 0.7 0.0 0:00.26 kworker/3:3-events_freezable 4376 chris 20 0 11232 3168 2616 R 0.7 0.0 0:00.21 top 12872 iobroker 20 0 190676 74496 31076 R 0.7 0.9 0:56.94 io.modbus.2 13148 iobroker 20 0 190316 68192 31092 S 0.7 0.8 0:26.23 io.sayit.0 13 root 20 0 0 0 0 S 0.3 0.0 0:04.86 ksoftirqd/0 29 root 20 0 0 0 0 S 0.3 0.0 0:01.93 ksoftirqd/3 71 root 0 -20 0 0 0 I 0.3 0.0 0:32.50 kworker/u9:0-brcmf_wq/mmc1:0001:1 94 root -51 0 0 0 0 S 0.3 0.0 1:03.25 irq/62-mmc0 99 root 20 0 0 0 0 S 0.3 0.0 0:29.28 jbd2/sda2-8 397 avahi 20 0 7048 3260 2776 S 0.3 0.0 0:43.51 avahi-daemon 425 root 20 0 26544 3232 2648 S 0.3 0.0 0:24.53 rsyslogd 3438 root 20 0 0 0 0 I 0.3 0.0 0:00.85 kworker/0:0-events 12530 root 20 0 0 0 0 I 0.3 0.0 0:03.95 kworker/u8:0-ext4-rsv-conversion 12805 iobroker 20 0 200348 87792 36512 S 0.3 1.1 0:36.13 io.telegram.0 1 root 20 0 33884 9280 7304 S 0.0 0.1 0:05.87 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kthreadd 3 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 netns 8 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/0:0H-kblockd 10 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_tasks_rude_ 12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_tasks_trace 14 root 20 0 0 0 0 I 0.0 0.0 0:28.97 rcu_sched 15 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/0 16 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/0 17 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/1 18 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/1 19 root 20 0 0 0 0 S 0.0 0.0 0:01.96 ksoftirqd/1 21 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/1:0H-kblockd 22 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/2 23 root rt 0 0 0 0 S 0.0 0.0 0:00.01 migration/2 24 root 20 0 0 0 0 S 0.0 0.0 0:01.84 ksoftirqd/2 26 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/2:0H-events_highpri 27 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/3 28 root rt 0 0 0 0 S 0.0 0.0 0:00.03 migration/3 31 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/3:0H-kblockd 32 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs 33 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 inet_frag_wq 38 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kauditd 39 root 20 0 0 0 0 S 0.0 0.0 0:00.02 khungtaskd 40 root 20 0 0 0 0 S 0.0 0.0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 writeback 42 root 20 0 0 0 0 S 0.0 0.0 0:01.65 kcompactd0 65 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kblockd -
wieder aus :face_palm:
top - 14:11:53 up 7:29, 1 user, load average: 1.54, 0.90, 0.64 Tasks: 168 total, 6 running, 162 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.4 us, 3.3 sy, 0.0 ni, 91.4 id, 0.3 wa, 0.0 hi, 0.7 si, 0.0 st MiB Mem : 7897.9 total, 4814.5 free, 1622.8 used, 1460.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 6402.4 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12707 iobroker 20 0 317684 197820 31240 R 7.9 2.4 51:10.70 iobroker.js-con 13917 iobroker 20 0 188504 72572 31144 S 6.6 0.9 7:22.64 io.ds18b20.0 12749 iobroker 20 0 207932 92456 30960 R 5.3 1.1 14:17.62 io.influxdb.0 724 influxdb 20 0 1145204 141052 28568 S 3.6 1.7 19:10.58 influxd 12985 iobroker 20 0 205832 97900 36008 R 1.7 1.2 12:43.68 io.jarvis.0 16633 iobroker 20 0 194864 79508 31092 R 1.7 1.0 1:55.75 io.modbus.0 12726 iobroker 20 0 397608 208948 36536 S 1.3 2.6 2:54.47 io.admin.0 12768 iobroker 20 0 248732 139212 35984 S 1.3 1.7 9:21.69 io.javascript.0 135 root 20 0 86752 38788 37948 S 1.0 0.5 1:21.27 systemd-journal 12798 iobroker 20 0 261968 150776 36784 S 1.0 1.9 10:56.55 node-red 4282 root 20 0 0 0 0 I 0.7 0.0 0:00.26 kworker/3:3-events_freezable 4376 chris 20 0 11232 3168 2616 R 0.7 0.0 0:00.21 top 12872 iobroker 20 0 190676 74496 31076 R 0.7 0.9 0:56.94 io.modbus.2 13148 iobroker 20 0 190316 68192 31092 S 0.7 0.8 0:26.23 io.sayit.0 13 root 20 0 0 0 0 S 0.3 0.0 0:04.86 ksoftirqd/0 29 root 20 0 0 0 0 S 0.3 0.0 0:01.93 ksoftirqd/3 71 root 0 -20 0 0 0 I 0.3 0.0 0:32.50 kworker/u9:0-brcmf_wq/mmc1:0001:1 94 root -51 0 0 0 0 S 0.3 0.0 1:03.25 irq/62-mmc0 99 root 20 0 0 0 0 S 0.3 0.0 0:29.28 jbd2/sda2-8 397 avahi 20 0 7048 3260 2776 S 0.3 0.0 0:43.51 avahi-daemon 425 root 20 0 26544 3232 2648 S 0.3 0.0 0:24.53 rsyslogd 3438 root 20 0 0 0 0 I 0.3 0.0 0:00.85 kworker/0:0-events 12530 root 20 0 0 0 0 I 0.3 0.0 0:03.95 kworker/u8:0-ext4-rsv-conversion 12805 iobroker 20 0 200348 87792 36512 S 0.3 1.1 0:36.13 io.telegram.0 1 root 20 0 33884 9280 7304 S 0.0 0.1 0:05.87 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kthreadd 3 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 netns 8 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/0:0H-kblockd 10 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_tasks_rude_ 12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_tasks_trace 14 root 20 0 0 0 0 I 0.0 0.0 0:28.97 rcu_sched 15 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/0 16 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/0 17 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/1 18 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/1 19 root 20 0 0 0 0 S 0.0 0.0 0:01.96 ksoftirqd/1 21 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/1:0H-kblockd 22 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/2 23 root rt 0 0 0 0 S 0.0 0.0 0:00.01 migration/2 24 root 20 0 0 0 0 S 0.0 0.0 0:01.84 ksoftirqd/2 26 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/2:0H-events_highpri 27 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/3 28 root rt 0 0 0 0 S 0.0 0.0 0:00.03 migration/3 31 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/3:0H-kblockd 32 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs 33 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 inet_frag_wq 38 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kauditd 39 root 20 0 0 0 0 S 0.0 0.0 0:00.02 khungtaskd 40 root 20 0 0 0 0 S 0.0 0.0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 writeback 42 root 20 0 0 0 0 S 0.0 0.0 0:01.65 kcompactd0 65 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kblockd -
wieder aus :face_palm:
top - 14:11:53 up 7:29, 1 user, load average: 1.54, 0.90, 0.64 Tasks: 168 total, 6 running, 162 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.4 us, 3.3 sy, 0.0 ni, 91.4 id, 0.3 wa, 0.0 hi, 0.7 si, 0.0 st MiB Mem : 7897.9 total, 4814.5 free, 1622.8 used, 1460.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 6402.4 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12707 iobroker 20 0 317684 197820 31240 R 7.9 2.4 51:10.70 iobroker.js-con 13917 iobroker 20 0 188504 72572 31144 S 6.6 0.9 7:22.64 io.ds18b20.0 12749 iobroker 20 0 207932 92456 30960 R 5.3 1.1 14:17.62 io.influxdb.0 724 influxdb 20 0 1145204 141052 28568 S 3.6 1.7 19:10.58 influxd 12985 iobroker 20 0 205832 97900 36008 R 1.7 1.2 12:43.68 io.jarvis.0 16633 iobroker 20 0 194864 79508 31092 R 1.7 1.0 1:55.75 io.modbus.0 12726 iobroker 20 0 397608 208948 36536 S 1.3 2.6 2:54.47 io.admin.0 12768 iobroker 20 0 248732 139212 35984 S 1.3 1.7 9:21.69 io.javascript.0 135 root 20 0 86752 38788 37948 S 1.0 0.5 1:21.27 systemd-journal 12798 iobroker 20 0 261968 150776 36784 S 1.0 1.9 10:56.55 node-red 4282 root 20 0 0 0 0 I 0.7 0.0 0:00.26 kworker/3:3-events_freezable 4376 chris 20 0 11232 3168 2616 R 0.7 0.0 0:00.21 top 12872 iobroker 20 0 190676 74496 31076 R 0.7 0.9 0:56.94 io.modbus.2 13148 iobroker 20 0 190316 68192 31092 S 0.7 0.8 0:26.23 io.sayit.0 13 root 20 0 0 0 0 S 0.3 0.0 0:04.86 ksoftirqd/0 29 root 20 0 0 0 0 S 0.3 0.0 0:01.93 ksoftirqd/3 71 root 0 -20 0 0 0 I 0.3 0.0 0:32.50 kworker/u9:0-brcmf_wq/mmc1:0001:1 94 root -51 0 0 0 0 S 0.3 0.0 1:03.25 irq/62-mmc0 99 root 20 0 0 0 0 S 0.3 0.0 0:29.28 jbd2/sda2-8 397 avahi 20 0 7048 3260 2776 S 0.3 0.0 0:43.51 avahi-daemon 425 root 20 0 26544 3232 2648 S 0.3 0.0 0:24.53 rsyslogd 3438 root 20 0 0 0 0 I 0.3 0.0 0:00.85 kworker/0:0-events 12530 root 20 0 0 0 0 I 0.3 0.0 0:03.95 kworker/u8:0-ext4-rsv-conversion 12805 iobroker 20 0 200348 87792 36512 S 0.3 1.1 0:36.13 io.telegram.0 1 root 20 0 33884 9280 7304 S 0.0 0.1 0:05.87 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kthreadd 3 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 netns 8 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/0:0H-kblockd 10 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_tasks_rude_ 12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_tasks_trace 14 root 20 0 0 0 0 I 0.0 0.0 0:28.97 rcu_sched 15 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/0 16 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/0 17 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/1 18 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/1 19 root 20 0 0 0 0 S 0.0 0.0 0:01.96 ksoftirqd/1 21 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/1:0H-kblockd 22 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/2 23 root rt 0 0 0 0 S 0.0 0.0 0:00.01 migration/2 24 root 20 0 0 0 0 S 0.0 0.0 0:01.84 ksoftirqd/2 26 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/2:0H-events_highpri 27 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/3 28 root rt 0 0 0 0 S 0.0 0.0 0:00.03 migration/3 31 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/3:0H-kblockd 32 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs 33 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 inet_frag_wq 38 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kauditd 39 root 20 0 0 0 0 S 0.0 0.0 0:00.02 khungtaskd 40 root 20 0 0 0 0 S 0.0 0.0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 writeback 42 root 20 0 0 0 0 S 0.0 0.0 0:01.65 kcompactd0 65 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kblockd@phoenixcr da muss dann etwas anderes faul sein
-
@thomas-braun sagte in Admin startet nicht mehr:
Was steht in
dmesg -Tso drin?
Sorry, habs hier reinkopiert, da ich mich nicht auskenne.
Booting Linux on physical CPU 0x0 Linux version 5.15.76-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1597 SMP Fri Nov 4 12:14:58 GMT 2022 CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 random: crng init done Memory policy: Data cache writealloc Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Zone ranges: DMA [mem 0x0000000000000000-0x000000002fffffff] Normal empty HighMem [mem 0x0000000030000000-0x00000001ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x000000003b2fffff] node 0: [mem 0x0000000040000000-0x00000000fbffffff] node 0: [mem 0x0000000100000000-0x00000001ffffffff] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] On node 0, zone HighMem: 256 pages in unavailable ranges percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536 pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists, mobility grouping on. Total pages: 2059328 Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:24:48:2F vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=13a628e6-02 rootfstype=ext4 fsck.repair=yes rootwait Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off software IO TLB: mapped [mem 0x0000000012400000-0x0000000016400000] (64MB) Memory: 7757740K/8244224K available (10240K kernel code, 1386K rwdata, 3308K rodata, 2048K init, 591K bss, 158804K reserved, 327680K cma-reserved, 7457792K highmem) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 ftrace: allocating 35511 entries in 105 pages ftrace: allocated 105 pages with 4 groups trace event string verifier disabled rcu: Hierarchical RCU implementation. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 GIC: Using split EOI/Deactivate mode irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) arch_timer: cp15 timer(s) running at 54.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns Switching to timer-based delay loop, resolution 18ns Console: colour dummy device 80x30 printk: console [tty1] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) pid_max: default: 32768 minimum: 301 LSM: Security Framework initializing Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) cgroup: Disabling memory control group subsystem CPU: Testing write buffer coherency: ok CPU0: Spectre BHB: enabling loop workaround for all CPUs CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x200000 - 0x20003c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 smp: Brought up 1 node, 4 CPUs SMP: Total of 4 processors activated (432.00 BogoMIPS). CPU: All CPU(s) started in HYP mode. CPU: Virtualization extensions available. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 1024 (order: 4, 65536 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered PF_NETLINK/PF_ROUTE protocol family DMA: preallocated 1024 KiB pool for atomic coherent allocations audit: initializing netlink subsys (disabled) audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. Serial: AMBA PL011 UART driver bcm2835-mbox fe00b880.mailbox: mailbox enabled raspberrypi-firmware soc:firmware: Attached to firmware from 2022-10-26T11:09:05, variant start raspberrypi-firmware soc:firmware: Firmware hash is c72ad6b26ff40c91ef776b847436094ee63fabee Kprobes globally optimized bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usb_phy_generic phy: supply vcc not found, using dummy regulator usb_phy_generic phy: dummy supplies not allowed for exclusive requests pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered clocksource: Switched to clocksource arch_sys_counter VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered PF_INET protocol family IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes, linear) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=21 bucket_order=7 zbud: loaded FS-Cache: Netfs 'nfs' registered for caching NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Key type asymmetric registered Asymmetric key parser 'x509' registered bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) io scheduler mq-deadline registered io scheduler kyber registered brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 pci 0000:00:00.0: PME# supported from D0 D3hot PCI: bus0: Fast back to back transfers disabled pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] pci 0000:01:00.0: PME# supported from D0 D3hot PCI: bus1: Fast back to back transfers disabled pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] pcieport 0000:00:00.0: enabling device (0140 -> 0142) pcieport 0000:00:00.0: PME: Signaling with IRQ 77 iproc-rng200 fe104000.rng: hwrng registered vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 brd: module loaded loop: module loaded Loading iSCSI transport class v2.0-870. bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus usbcore: registered new interface driver r8152 usbcore: registered new interface driver lan78xx usbcore: registered new interface driver smsc95xx xhci_hcd 0000:01:00.0: xHCI Host Controller xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000740000000890 xhci_hcd 0000:01:00.0: xHCI Host Controller xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 5.15.76-v7l+ xhci-hcd usb usb1: SerialNumber: 0000:01:00.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 5.15.76-v7l+ xhci-hcd usb usb2: SerialNumber: 0000:01:00.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected dwc_otg: version 3.00a 10-AUG-2012 (platform bus) dwc_otg: FIQ enabled dwc_otg: NAK holdoff enabled dwc_otg: FIQ split-transaction FSM enabled Module dwc_common_port init usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs hid: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver Initializing XFRM netlink socket NET: Registered PF_PACKET protocol family Key type dns_resolver registered Registering SWP/SWPB emulation handler registered taskstats version 1 Loading compiled-in X.509 certificates Key type ._fscrypt registered Key type .fscrypt registered Key type fscrypt-provisioning registered uart-pl011 fe201000.serial: there is not valid maps for state default uart-pl011 fe201000.serial: cts_event_workaround enabled fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 mmc-bcm2835 fe300000.mmcnr: DMA channel allocated of_cfs_init of_cfs_init: OK mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA Waiting for root device PARTUUID=13a628e6-02... mmc1: new high speed SDIO card at address 0001 usb 1-1: new high-speed USB device number 2 using xhci_hcd usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: USB2.0 Hub hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd usb 2-2: New USB device found, idVendor=2109, idProduct=0711, bcdDevice= 5.07 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: External USB 3.0 usb 2-2: Manufacturer: Intenso usb 2-2: SerialNumber: 20140730020549 scsi host0: uas scsi 0:0:0:0: Direct-Access Intenso External USB 3.0 5438 PQ: 0 ANSI: 6 sd 0:0:0:0: [sda] 250069676 512-byte logical blocks: (128 GB/119 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. VFS: Mounted root (ext4 filesystem) readonly on device 8:2. devtmpfs: mounted Freeing unused kernel image (initmem) memory: 2048K Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux systemd[1]: System time before build time, advancing clock. NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) systemd[1]: Detected architecture arm. systemd[1]: Set hostname to <homeautomationcretu>. systemd[1]: Queued start job for default target Multi-User System. systemd[1]: Created slice system-getty.slice. systemd[1]: Created slice system-modprobe.slice. systemd[1]: Created slice system-systemd\x2dfsck.slice. systemd[1]: Created slice User and Session Slice. systemd[1]: Started Dispatch Password Requests to Console Directory Watch. systemd[1]: Started Forward Password Requests to Wall Directory Watch. systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. systemd[1]: Reached target Local Encrypted Volumes. systemd[1]: Reached target Paths. systemd[1]: Reached target Slices. systemd[1]: Reached target Swap. systemd[1]: Listening on Syslog Socket. systemd[1]: Listening on fsck to fsckd communication Socket. systemd[1]: Listening on initctl Compatibility Named Pipe. systemd[1]: Listening on Journal Audit Socket. systemd[1]: Listening on Journal Socket (/dev/log). systemd[1]: Listening on Journal Socket. systemd[1]: Listening on udev Control Socket. systemd[1]: Listening on udev Kernel Socket. systemd[1]: Condition check resulted in Huge Pages File System being skipped. systemd[1]: Mounting POSIX Message Queue File System... systemd[1]: Mounting RPC Pipe File System... systemd[1]: Mounting Kernel Debug File System... systemd[1]: Mounting Kernel Trace File System... systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. systemd[1]: Starting Restore / save the current clock... systemd[1]: Starting Set the console keyboard layout... systemd[1]: Starting Create list of static device nodes for the current kernel... systemd[1]: Starting Load Kernel Module configfs... systemd[1]: Starting Load Kernel Module drm... systemd[1]: Starting Load Kernel Module fuse... systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. systemd[1]: Starting File System Check on Root Device... systemd[1]: Starting Journal Service... systemd[1]: Starting Load Kernel Modules... systemd[1]: Starting Coldplug All udev Devices... systemd[1]: Mounted POSIX Message Queue File System. systemd[1]: Mounted RPC Pipe File System. systemd[1]: Mounted Kernel Debug File System. systemd[1]: Mounted Kernel Trace File System. fuse: init (API version 7.34) systemd[1]: Finished Restore / save the current clock. systemd[1]: Finished Create list of static device nodes for the current kernel. systemd[1]: modprobe@configfs.service: Succeeded. systemd[1]: Finished Load Kernel Module configfs. systemd[1]: modprobe@fuse.service: Succeeded. systemd[1]: Finished Load Kernel Module fuse. systemd[1]: Mounting FUSE Control File System... systemd[1]: Mounting Kernel Configuration File System... systemd[1]: Started File System Check Daemon to report status. systemd[1]: Finished Load Kernel Modules. systemd[1]: Starting Apply Kernel Variables... systemd[1]: Mounted Kernel Configuration File System. systemd[1]: Mounted FUSE Control File System. systemd[1]: modprobe@drm.service: Succeeded. systemd[1]: Finished Load Kernel Module drm. systemd[1]: Finished Apply Kernel Variables. systemd[1]: Started Journal Service. EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none. systemd-journald[135]: Received client request to flush runtime journal. Driver for 1-wire Dallas network protocol. gpio-4 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file mc: Linux media interface: v0.10 w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075ef00 crc 42 vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_vc_sm_cma_probe: Videocore shared memory driver [vc_sm_connected_init]: start w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d07591cc crc 6f [vc_sm_connected_init]: installed successfully brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode videodev: Linux video capture interface: v2.00 brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075bc6c crc 27 snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_audio bcm2835_audio: card created with 8 channels w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075095c crc 57 bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 bcm2835-isp bcm2835-isp: Register output node 0 with media controller bcm2835-isp bcm2835-isp: Register capture node 1 with media controller bcm2835-isp bcm2835-isp: Register capture node 2 with media controller bcm2835-isp bcm2835-isp: Register capture node 3 with media controller rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075defc crc 04 bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 rpivid feb10000.codec: Device registered as /dev/video19 bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 bcm2835-isp bcm2835-isp: Register output node 0 with media controller bcm2835-isp bcm2835-isp: Register capture node 1 with media controller bcm2835-isp bcm2835-isp: Register capture node 2 with media controller bcm2835-isp bcm2835-isp: Register capture node 3 with media controller bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp bcm2835-codec bcm2835-codec: Device registered as /dev/video10 bcm2835-codec bcm2835-codec: Loaded V4L2 decode bcm2835-codec bcm2835-codec: Device registered as /dev/video11 bcm2835-codec bcm2835-codec: Loaded V4L2 encode bcm2835-codec bcm2835-codec: Device registered as /dev/video12 bcm2835-codec bcm2835-codec: Loaded V4L2 isp bcm2835-codec bcm2835-codec: Device registered as /dev/video18 bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx bcm2835-codec bcm2835-codec: Device registered as /dev/video31 bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d0758d62 crc 7d cfg80211: loaded regulatory.db is malformed or signature is missing/invalid w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075529e crc 43 brcmfmac: F1 signature read @0x18000000=0x15264345 brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075acd5 crc ca w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075c65f crc 43 sd 0:0:0:0: Attached scsi generic sg0 type 0 usbcore: registered new interface driver brcmfmac brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) Registered IR keymap rc-cec rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) Registered IR keymap rc-cec rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1 vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 vc4-drm gpu: [drm] Cannot find any crtc or sizes 8021q: 802.1Q VLAN Support v1.8 uart-pl011 fe201000.serial: no DMA platform data Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) bcmgenet fd580000.ethernet eth0: Link is Down bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Bluetooth: Core ver 2.22 NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: HCI UART driver ver 2.3 Bluetooth: HCI UART protocol H4 registered Bluetooth: HCI UART protocol Three-wire (H5) registered Bluetooth: HCI UART protocol Broadcom registered Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized NET: Registered PF_ALG protocol family cryptd: max_cpu_qlen set to 1000 ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead vc4-drm gpu: [drm] Cannot find any crtc or sizes cam-dummy-reg: disabling chris@homeautomationcretu:~ $ -
@phoenixcr da muss dann etwas anderes faul sein
@crunchip sagte in Admin startet nicht mehr:
@phoenixcr da muss dann etwas anderes faul sein
genau deswegen habe ich im Forum geschrieben
-
@phoenixcr wenn es so bleibt, sollte auch nichts abstürzen.
Es geht sogar bis auf 1,98 hoch.
Ich finde aber keine Ursache dafür.
Komisch ist, dass genau da (21:08-21:11-21:22), fehlt auch der log.
2022-12-29 21:08:10.905 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:12.461 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:16.867 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:18.381 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:23.379 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:24.953 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:27.273 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:28.771 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:32.911 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:34.507 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:39.173 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:40.721 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:11:31.252 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 javascript 2022-12-29 21:22:03.705 - [33mwarn[39m: ds18b20.0 (13917) Error reading sensor 28-3c01d075c65f: Error: Read error -
Komisch, ohne etwas zu machen, geht der load wieder runter und läuft der io weiter
top - 17:45:03 up 11:02, 1 user, load average: 0.27, 0.31, 0.40@phoenixcr wenn der Pi gerade "arbeitet"(backup,updates,...etc) geht natürlich der load mal kurzfristig hoch
-
Es geht sogar bis auf 1,98 hoch.
Ich finde aber keine Ursache dafür.
Komisch ist, dass genau da (21:08-21:11-21:22), fehlt auch der log.2022-12-29 21:08:10.905 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:12.461 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:16.867 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:18.381 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:23.379 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:24.953 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:27.273 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:28.771 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:32.911 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:34.507 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:39.173 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:40.721 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:11:31.252 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 javascript 2022-12-29 21:22:03.705 - [33mwarn[39m: ds18b20.0 (13917) Error reading sensor 28-3c01d075c65f: Error: Read error@phoenixcr sagte in Admin startet nicht mehr:
Es geht sogar bis auf 1,98 hoch.
1,98 ist bei 4 Kernen gerade mal 50% Last, wenn diese gleich auf alle 4 Kerne verteilt ist.
-
Frohes Neues!
Es passiert immer noch.
Bin am Verzweifeln schon.
Etwas in log, verstehe ich nicht.
Hat es eine Bedeutung?<--- Last few GCs ---> [29672:0x48b3240] 92079701 ms: Scavenge 886.1 (1046.0) -> 885.4 (1046.0) MB, 17.5 / 0.0 ms (average mu = 0.946, current mu = 0.949) allocation failure [29672:0x48b3240] 92079792 ms: Scavenge 886.8 (1046.0) -> 885.9 (1046.0) MB, 29.7 / 0.0 ms (average mu = 0.946, current mu = 0.949) allocation failure [29672:0x48b3240] 92079852 ms: Scavenge 887.2 (1046.0) -> 886.6 (1050.0) MB, 27.5 / 0.0 ms (average mu = 0.946, current mu = 0.949) allocation failure <--- JS stacktrace ---> -
Der Iob js controller bleibt beim 93 % hängen. Ich kann es nur mit stop start hinkriegen, dass es weiter läuft.
Was könnte ich noch nachschauen?
@phoenixcr sagte in Admin startet nicht mehr:
Was könnte ich noch nachschauen?
Ich vermute dass da ein Skript aus dem Ruder läuft. Schau dir die mal näher an.
-
@phoenixcr sagte in Admin startet nicht mehr:
Was könnte ich noch nachschauen?
Ich vermute dass da ein Skript aus dem Ruder läuft. Schau dir die mal näher an.
@thomas-braun
meinst du im JavaScript?
Ich hab 4 Stück, was soll da schiefgehen?
Ich kann die stoppen und dann nochmal testen.
-
@phoenixcr sagte in Admin startet nicht mehr:
Ich hab 4 Stück, was soll da schiefgehen?
Mit der Anzahl hat das nix zu tun. Da reicht eine Zeile mit Quatsch drin.
Liegen die etwa in 'global'?
-
In log, steht auch nichts besonderes. Oder?
2023-01-03 18:12:34.728 - [32minfo[39m: admin.0 (6962) terminating http server on port 8081 2023-01-03 18:12:34.719 - [32minfo[39m: info.0 (32343) cleaned everything up... 2023-01-03 18:12:34.731 - [32minfo[39m: backitup.0 (32285) cleaned everything up... 2023-01-03 18:12:34.744 - [32minfo[39m: sayit.0 (415) stopping... 2023-01-03 18:12:34.737 - [32minfo[39m: node-red.0 (12718) kill node-red task 2023-01-03 18:12:34.789 - [32minfo[39m: iot.0 (32366) Connection changed: disconnect 2023-01-03 18:12:34.820 - [32minfo[39m: iot.0 (32366) Connection lost 2023-01-03 18:12:34.754 - [32minfo[39m: javascript.0 (31963) Stop script script.js.Müll_Kopie 2023-01-03 18:12:34.822 - [32minfo[39m: javascript.0 (31963) Stop script script.js.CPU_Last 2023-01-03 18:12:34.837 - [32minfo[39m: javascript.0 (31963) Stop script script.js.TKN 2023-01-03 18:12:34.839 - [32minfo[39m: javascript.0 (31963) Stop script script.js.WM_Fertig_OK 2023-01-03 18:12:35.259 - [33mwarn[39m: web.0 (568) Timeout by termination of web-extensions! 2023-01-03 18:12:35.274 - [32minfo[39m: web.0 (568) terminated http server on port 8082 2023-01-03 18:12:36.224 - [32minfo[39m: modbus.2 (32094) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.216 - [32minfo[39m: tankerkoenig.0 (496) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.237 - [32minfo[39m: iot.0 (32366) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.250 - [32minfo[39m: modbus.0 (3211) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.244 - [32minfo[39m: telegram.0 (19032) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.255 - [32minfo[39m: javascript.0 (31963) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.231 - [32minfo[39m: net-tools.0 (32529) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.223 - [32minfo[39m: text2command.0 (546) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.259 - [32minfo[39m: info.0 (32343) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.262 - [32minfo[39m: backitup.0 (32285) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.264 - [32minfo[39m: sayit.0 (415) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.271 - [32minfo[39m: admin.0 (6962) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.276 - [32minfo[39m: node-red.0 (12718) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.281 - [32minfo[39m: web.0 (568) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.255 - [32minfo[39m: discovery.0 (32270) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.277 - [32minfo[39m: rpi2.0 (32109) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.720 - [32minfo[39m: node-red.0 (12733) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:40.766 - [32minfo[39m: tuya.0 (32255) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:45.820 - [32minfo[39m: influxdb.0 (31952) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason -
In log, steht auch nichts besonderes. Oder?
2023-01-03 18:12:34.728 - [32minfo[39m: admin.0 (6962) terminating http server on port 8081 2023-01-03 18:12:34.719 - [32minfo[39m: info.0 (32343) cleaned everything up... 2023-01-03 18:12:34.731 - [32minfo[39m: backitup.0 (32285) cleaned everything up... 2023-01-03 18:12:34.744 - [32minfo[39m: sayit.0 (415) stopping... 2023-01-03 18:12:34.737 - [32minfo[39m: node-red.0 (12718) kill node-red task 2023-01-03 18:12:34.789 - [32minfo[39m: iot.0 (32366) Connection changed: disconnect 2023-01-03 18:12:34.820 - [32minfo[39m: iot.0 (32366) Connection lost 2023-01-03 18:12:34.754 - [32minfo[39m: javascript.0 (31963) Stop script script.js.Müll_Kopie 2023-01-03 18:12:34.822 - [32minfo[39m: javascript.0 (31963) Stop script script.js.CPU_Last 2023-01-03 18:12:34.837 - [32minfo[39m: javascript.0 (31963) Stop script script.js.TKN 2023-01-03 18:12:34.839 - [32minfo[39m: javascript.0 (31963) Stop script script.js.WM_Fertig_OK 2023-01-03 18:12:35.259 - [33mwarn[39m: web.0 (568) Timeout by termination of web-extensions! 2023-01-03 18:12:35.274 - [32minfo[39m: web.0 (568) terminated http server on port 8082 2023-01-03 18:12:36.224 - [32minfo[39m: modbus.2 (32094) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.216 - [32minfo[39m: tankerkoenig.0 (496) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.237 - [32minfo[39m: iot.0 (32366) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.250 - [32minfo[39m: modbus.0 (3211) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.244 - [32minfo[39m: telegram.0 (19032) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.255 - [32minfo[39m: javascript.0 (31963) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.231 - [32minfo[39m: net-tools.0 (32529) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.223 - [32minfo[39m: text2command.0 (546) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.259 - [32minfo[39m: info.0 (32343) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.262 - [32minfo[39m: backitup.0 (32285) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.264 - [32minfo[39m: sayit.0 (415) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.271 - [32minfo[39m: admin.0 (6962) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.276 - [32minfo[39m: node-red.0 (12718) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.281 - [32minfo[39m: web.0 (568) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.255 - [32minfo[39m: discovery.0 (32270) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.277 - [32minfo[39m: rpi2.0 (32109) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.720 - [32minfo[39m: node-red.0 (12733) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:40.766 - [32minfo[39m: tuya.0 (32255) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:45.820 - [32minfo[39m: influxdb.0 (31952) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reasonWas soll da drin stehen? Offenbar ist der Server da gerade neugestartet worden.
-
Was soll da drin stehen? Offenbar ist der Server da gerade neugestartet worden.
-
Die Ursache, vielleicht, wieso der hängen bleibt.
Gibt es eine Möglichkeit, dass er sich automatisch beim Aufhängen neu startet?Schau in die Skripte. Da ist zu 100% was krumm.
Und du hast auch noch nicht beantwortet ob die im global-Verzeichnis liegen. -
Schau in die Skripte. Da ist zu 100% was krumm.
Und du hast auch noch nicht beantwortet ob die im global-Verzeichnis liegen.@thomas-braun sagte in Admin startet nicht mehr:
Schau in die Skripte. Da ist zu 100% was krumm.
Und du hast auch noch nicht beantwortet ob die im global-Verzeichnis liegen.Die laufen seit mehr als 1 Jahr, ohne dass ich da was ändern würde.
Die sind in keinem Ordner, die liegen komplett außerhalb. -
@thomas-braun sagte in Admin startet nicht mehr:
Schau in die Skripte. Da ist zu 100% was krumm.
Und du hast auch noch nicht beantwortet ob die im global-Verzeichnis liegen.Die laufen seit mehr als 1 Jahr, ohne dass ich da was ändern würde.
Die sind in keinem Ordner, die liegen komplett außerhalb.Du nicht, aber der javascript-Adapter ändert ggf. die Anforderungen an sauberen code. Was früher ging muss mit aktuellem Javascript nicht mehr laufen.
Du musst da rein schauen. Oder reinschauen lassen.
725
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge