UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[crunchip]

@phoenixcr das sollte sich legen, wenn alles "sauber" läuft
was zeigt denn aktuell

top

[PhoenixCR]

@crunchip sagte in Admin startet nicht mehr:

@phoenixcr das sollte sich legen, wenn alles "sauber" läuft
was zeigt denn aktuell

top

Tasks: 172 total,   1 running, 171 sleeping,   0 stopped,   0 zombie
%Cpu0  :  1.3 us,  1.3 sy,  0.0 ni, 97.0 id,  0.0 wa,  0.0 hi,  0.3 si,  0.0 st
%Cpu1  :  1.3 us,  0.7 sy,  0.0 ni, 98.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
%Cpu2  :  9.0 us,  0.3 sy,  0.0 ni, 90.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
%Cpu3  :  1.7 us,  1.0 sy,  0.0 ni, 97.3 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7897.9 total,   5205.4 free,   1364.2 used,   1328.2 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   6593.9 avail Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
  724 influxdb  20   0 1144540 124268  25488 S   5.9   1.5   7:41.61 influxd
12707 iobroker  20   0  251840 138396  31164 S   4.3   1.7   7:21.30 iobroker.js-con
12749 iobroker  20   0  204472  89780  30896 S   1.3   1.1   2:35.19 io.influxdb.0
12768 iobroker  20   0  246948 138276  35984 S   1.0   1.7   1:29.12 io.javascript.0
12985 iobroker  20   0  210752 104104  36008 S   0.7   1.3   2:09.10 io.jarvis.0
18615 root      20   0       0      0      0 I   0.7   0.0   0:01.42 kworker/3:0-events_power_efficient
   29 root      20   0       0      0      0 S   0.3   0.0   0:01.06 ksoftirqd/3
   71 root       0 -20       0      0      0 I   0.3   0.0   0:11.74 kworker/u9:0-brcmf_wq/mmc1:0001:1
   94 root     -51   0       0      0      0 S   0.3   0.0   0:28.02 irq/62-mmc0
  397 avahi     20   0    6916   2704   2444 S   0.3   0.0   0:15.22 avahi-daemon
  720 grafana   20   0 1021204  84828  57008 S   0.3   1.0   0:25.57 grafana-server
12726 iobroker  20   0  209532 101340  36472 S   0.3   1.3   0:34.07 io.admin.0
12798 iobroker  20   0  255848 144812  36784 S   0.3   1.8   0:48.29 node-red
12919 iobroker  20   0  187636  71652  32036 S   0.3   0.9   0:15.89 io.chromecast.0
12962 iobroker  20   0  200564  85408  31708 S   0.3   1.1   0:25.61 io.info.0
13545 iobroker  20   0  185532  65364  30984 S   0.3   0.8   0:10.28 io.text2command
18996 root      20   0       0      0      0 I   0.3   0.0   0:00.05 kworker/0:3-events
19102 chris     20   0   11252   3024   2540 R   0.3   0.0   0:00.09 top
    1 root      20   0   33884   9268   7304 S   0.0   0.1   0:05.60 systemd
    2 root      20   0       0      0      0 S   0.0   0.0   0:00.01 kthreadd
    3 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 rcu_gp
    4 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 rcu_par_gp
    5 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 slub_flushwq
    6 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 netns
    8 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/0:0H-kblockd
   10 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 mm_percpu_wq
   11 root      20   0       0      0      0 S   0.0   0.0   0:00.00 rcu_tasks_rude_
   12 root      20   0       0      0      0 S   0.0   0.0   0:00.00 rcu_tasks_trace
   13 root      20   0       0      0      0 S   0.0   0.0   0:02.53 ksoftirqd/0
   14 root      20   0       0      0      0 I   0.0   0.0   0:11.96 rcu_sched
   15 root      rt   0       0      0      0 S   0.0   0.0   0:00.02 migration/0
   16 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/0
   17 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/1
   18 root      rt   0       0      0      0 S   0.0   0.0   0:00.01 migration/1
   19 root      20   0       0      0      0 S   0.0   0.0   0:01.10 ksoftirqd/1
   21 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/1:0H-kblockd
   22 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/2
   23 root      rt   0       0      0      0 S   0.0   0.0   0:00.01 migration/2
   24 root      20   0       0      0      0 S   0.0   0.0   0:00.98 ksoftirqd/2
   26 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/2:0H-events_highpri
   27 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/3
   28 root      rt   0       0      0      0 S   0.0   0.0   0:00.02 migration/3
   31 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/3:0H-kblockd
   32 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kdevtmpfs
   33 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 inet_frag_wq
   38 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kauditd
   39 root      20   0       0      0      0 S   0.0   0.0   0:00.01 khungtaskd
   40 root      20   0       0      0      0 S   0.0   0.0   0:00.00 oom_reaper
   41 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 writeback
   42 root      20   0       0      0      0 S   0.0   0.0   0:00.72 kcompactd0
   65 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kblockd
   66 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 blkcg_punt_bio
   67 root     -51   0       0      0      0 S   0.0   0.0   0:00.00 watchdogd

[crunchip]

@phoenixcr da fehlt die erste Zeile

[PhoenixCR]

@crunchip sagte in Admin startet nicht mehr:

@phoenixcr da fehlt die erste Zeile

sorry

chris@homeautomationcretu:~ $ top
top - 09:58:15 up  3:16,  1 user,  load average: 0.19, 0.40, 0.45

[crunchip]

@phoenixcr sieht doch gut aus

[PhoenixCR]

@crunchip sagte in Admin startet nicht mehr:

@phoenixcr sieht doch gut aus

bis der iob abstürzt

[crunchip]

@phoenixcr wenn es so bleibt, sollte auch nichts abstürzen.

[PhoenixCR]

@crunchip

wieder aus :face_palm:

top - 14:11:53 up  7:29,  1 user,  load average: 1.54, 0.90, 0.64
Tasks: 168 total,   6 running, 162 sleeping,   0 stopped,   0 zombie
%Cpu(s):  4.4 us,  3.3 sy,  0.0 ni, 91.4 id,  0.3 wa,  0.0 hi,  0.7 si,  0.0 st
MiB Mem :   7897.9 total,   4814.5 free,   1622.8 used,   1460.6 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   6402.4 avail Mem

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
12707 iobroker  20   0  317684 197820  31240 R   7.9   2.4  51:10.70 iobroker.js-con
13917 iobroker  20   0  188504  72572  31144 S   6.6   0.9   7:22.64 io.ds18b20.0
12749 iobroker  20   0  207932  92456  30960 R   5.3   1.1  14:17.62 io.influxdb.0
  724 influxdb  20   0 1145204 141052  28568 S   3.6   1.7  19:10.58 influxd
12985 iobroker  20   0  205832  97900  36008 R   1.7   1.2  12:43.68 io.jarvis.0
16633 iobroker  20   0  194864  79508  31092 R   1.7   1.0   1:55.75 io.modbus.0
12726 iobroker  20   0  397608 208948  36536 S   1.3   2.6   2:54.47 io.admin.0
12768 iobroker  20   0  248732 139212  35984 S   1.3   1.7   9:21.69 io.javascript.0
  135 root      20   0   86752  38788  37948 S   1.0   0.5   1:21.27 systemd-journal
12798 iobroker  20   0  261968 150776  36784 S   1.0   1.9  10:56.55 node-red
 4282 root      20   0       0      0      0 I   0.7   0.0   0:00.26 kworker/3:3-events_freezable
 4376 chris     20   0   11232   3168   2616 R   0.7   0.0   0:00.21 top
12872 iobroker  20   0  190676  74496  31076 R   0.7   0.9   0:56.94 io.modbus.2
13148 iobroker  20   0  190316  68192  31092 S   0.7   0.8   0:26.23 io.sayit.0
   13 root      20   0       0      0      0 S   0.3   0.0   0:04.86 ksoftirqd/0
   29 root      20   0       0      0      0 S   0.3   0.0   0:01.93 ksoftirqd/3
   71 root       0 -20       0      0      0 I   0.3   0.0   0:32.50 kworker/u9:0-brcmf_wq/mmc1:0001:1
   94 root     -51   0       0      0      0 S   0.3   0.0   1:03.25 irq/62-mmc0
   99 root      20   0       0      0      0 S   0.3   0.0   0:29.28 jbd2/sda2-8
  397 avahi     20   0    7048   3260   2776 S   0.3   0.0   0:43.51 avahi-daemon
  425 root      20   0   26544   3232   2648 S   0.3   0.0   0:24.53 rsyslogd
 3438 root      20   0       0      0      0 I   0.3   0.0   0:00.85 kworker/0:0-events
12530 root      20   0       0      0      0 I   0.3   0.0   0:03.95 kworker/u8:0-ext4-rsv-conversion
12805 iobroker  20   0  200348  87792  36512 S   0.3   1.1   0:36.13 io.telegram.0
    1 root      20   0   33884   9280   7304 S   0.0   0.1   0:05.87 systemd
    2 root      20   0       0      0      0 S   0.0   0.0   0:00.03 kthreadd
    3 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 rcu_gp
    4 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 rcu_par_gp
    5 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 slub_flushwq
    6 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 netns
    8 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/0:0H-kblockd
   10 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 mm_percpu_wq
   11 root      20   0       0      0      0 S   0.0   0.0   0:00.00 rcu_tasks_rude_
   12 root      20   0       0      0      0 S   0.0   0.0   0:00.00 rcu_tasks_trace
   14 root      20   0       0      0      0 I   0.0   0.0   0:28.97 rcu_sched
   15 root      rt   0       0      0      0 S   0.0   0.0   0:00.02 migration/0
   16 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/0
   17 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/1
   18 root      rt   0       0      0      0 S   0.0   0.0   0:00.02 migration/1
   19 root      20   0       0      0      0 S   0.0   0.0   0:01.96 ksoftirqd/1
   21 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/1:0H-kblockd
   22 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/2
   23 root      rt   0       0      0      0 S   0.0   0.0   0:00.01 migration/2
   24 root      20   0       0      0      0 S   0.0   0.0   0:01.84 ksoftirqd/2
   26 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/2:0H-events_highpri
   27 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/3
   28 root      rt   0       0      0      0 S   0.0   0.0   0:00.03 migration/3
   31 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/3:0H-kblockd
   32 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kdevtmpfs
   33 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 inet_frag_wq
   38 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kauditd
   39 root      20   0       0      0      0 S   0.0   0.0   0:00.02 khungtaskd
   40 root      20   0       0      0      0 S   0.0   0.0   0:00.00 oom_reaper
   41 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 writeback
   42 root      20   0       0      0      0 S   0.0   0.0   0:01.65 kcompactd0
   65 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kblockd

[Thomas Braun]

@phoenixcr

Was steht in

dmesg -T

so drin?

[crunchip]

@phoenixcr da muss dann etwas anderes faul sein

[PhoenixCR]

@thomas-braun sagte in Admin startet nicht mehr:

@phoenixcr

Was steht in

dmesg -T

so drin?

Sorry, habs hier reinkopiert, da ich mich nicht auskenne.

Booting Linux on physical CPU 0x0
Linux version 5.15.76-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1597 SMP Fri Nov 4 12:14:58 GMT 2022
CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4
random: crng init done
Memory policy: Data cache writealloc
Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
Zone ranges:
  DMA      [mem 0x0000000000000000-0x000000002fffffff]
  Normal   empty
  HighMem  [mem 0x0000000030000000-0x00000001ffffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x000000003b2fffff]
  node   0: [mem 0x0000000040000000-0x00000000fbffffff]
  node   0: [mem 0x0000000100000000-0x00000001ffffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
On node 0, zone HighMem: 256 pages in unavailable ranges
percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536
pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists, mobility grouping on.  Total pages: 2059328
Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:24:48:2F vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=13a628e6-02 rootfstype=ext4 fsck.repair=yes rootwait
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
software IO TLB: mapped [mem 0x0000000012400000-0x0000000016400000] (64MB)
Memory: 7757740K/8244224K available (10240K kernel code, 1386K rwdata, 3308K rodata, 2048K init, 591K bss, 158804K reserved, 327680K cma-reserved, 7457792K highmem)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 35511 entries in 105 pages
ftrace: allocated 105 pages with 4 groups
trace event string verifier disabled
rcu: Hierarchical RCU implementation.
        Rude variant of Tasks RCU enabled.
        Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
GIC: Using split EOI/Deactivate mode
irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25)
arch_timer: cp15 timer(s) running at 54.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
Switching to timer-based delay loop, resolution 18ns
Console: colour dummy device 80x30
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
cgroup: Disabling memory control group subsystem
CPU: Testing write buffer coherency: ok
CPU0: Spectre BHB: enabling loop workaround for all CPUs
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x200000 - 0x20003c
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated (432.00 BogoMIPS).
CPU: All CPU(s) started in HYP mode.
CPU: Virtualization extensions available.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 1024 KiB pool for atomic coherent allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'step_wise'
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Serial: AMBA PL011 UART driver
bcm2835-mbox fe00b880.mailbox: mailbox enabled
raspberrypi-firmware soc:firmware: Attached to firmware from 2022-10-26T11:09:05, variant start
raspberrypi-firmware soc:firmware: Firmware hash is c72ad6b26ff40c91ef776b847436094ee63fabee
Kprobes globally optimized
bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usb_phy_generic phy: supply vcc not found, using dummy regulator
usb_phy_generic phy: dummy supplies not allowed for exclusive requests
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered PF_INET protocol family
IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=14 max_order=21 bucket_order=7
zbud: loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
pci 0000:00:00.0: PME# supported from D0 D3hot
PCI: bus0: Fast back to back transfers disabled
pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot
PCI: bus1: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
pcieport 0000:00:00.0: enabling device (0140 -> 0142)
pcieport 0000:00:00.0: PME: Signaling with IRQ 77
iproc-rng200 fe104000.rng: hwrng registered
vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
usbcore: registered new interface driver r8152
usbcore: registered new interface driver lan78xx
usbcore: registered new interface driver smsc95xx
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000740000000890
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.15.76-v7l+ xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.15.76-v7l+ xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
registered taskstats version 1
Loading compiled-in X.509 certificates
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
uart-pl011 fe201000.serial: there is not valid maps for state default
uart-pl011 fe201000.serial: cts_event_workaround enabled
fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2
bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
of_cfs_init
of_cfs_init: OK
mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
Waiting for root device PARTUUID=13a628e6-02...
mmc1: new high speed SDIO card at address 0001
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=2109, idProduct=0711, bcdDevice= 5.07
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: External USB 3.0
usb 2-2: Manufacturer: Intenso
usb 2-2: SerialNumber: 20140730020549
scsi host0: uas
scsi 0:0:0:0: Direct-Access     Intenso  External USB 3.0 5438 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 250069676 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
devtmpfs: mounted
Freeing unused kernel image (initmem) memory: 2048K
Run /sbin/init as init process
  with arguments:
    /sbin/init
  with environment:
    HOME=/
    TERM=linux
systemd[1]: System time before build time, advancing clock.
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture arm.
systemd[1]: Set hostname to <homeautomationcretu>.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Condition check resulted in Huge Pages File System being skipped.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Restore / save the current clock...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
fuse: init (API version 7.34)
systemd[1]: Finished Restore / save the current clock.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@fuse.service: Succeeded.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Started File System Check Daemon to report status.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.
systemd-journald[135]: Received client request to flush runtime journal.
Driver for 1-wire Dallas network protocol.
gpio-4 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file
mc: Linux media interface: v0.10
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075ef00 crc 42
vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[vc_sm_connected_init]: start
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d07591cc crc 6f
[vc_sm_connected_init]: installed successfully
brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
videodev: Linux video capture interface: v2.00
brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075bc6c crc 27
snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_audio bcm2835_audio: card created with 8 channels
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075095c crc 57
bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
bcm2835-isp bcm2835-isp: Register output node 0 with media controller
bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075defc crc 04
bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
rpivid feb10000.codec: Device registered as /dev/video19
bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
bcm2835-isp bcm2835-isp: Register output node 0 with media controller
bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
bcm2835-codec bcm2835-codec: Device registered as /dev/video10
bcm2835-codec bcm2835-codec: Loaded V4L2 decode
bcm2835-codec bcm2835-codec: Device registered as /dev/video11
bcm2835-codec bcm2835-codec: Loaded V4L2 encode
bcm2835-codec bcm2835-codec: Device registered as /dev/video12
bcm2835-codec bcm2835-codec: Loaded V4L2 isp
bcm2835-codec bcm2835-codec: Device registered as /dev/video18
bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
bcm2835-codec bcm2835-codec: Device registered as /dev/video31
bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d0758d62 crc 7d
cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075529e crc 43
brcmfmac: F1 signature read @0x18000000=0x15264345
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075acd5 crc ca
w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075c65f crc 43
sd 0:0:0:0: Attached scsi generic sg0 type 0
usbcore: registered new interface driver brcmfmac
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov  1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
Registered IR keymap rc-cec
rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
Registered IR keymap rc-cec
rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
vc4-drm gpu: [drm] Cannot find any crtc or sizes
8021q: 802.1Q VLAN Support v1.8
uart-pl011 fe201000.serial: no DMA platform data
Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k FS
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
bcmgenet fd580000.ethernet eth0: Link is Down
bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered PF_ALG protocol family
cryptd: max_cpu_qlen set to 1000
ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
vc4-drm gpu: [drm] Cannot find any crtc or sizes
cam-dummy-reg: disabling
chris@homeautomationcretu:~ $

[PhoenixCR]

@crunchip sagte in Admin startet nicht mehr:

@phoenixcr da muss dann etwas anderes faul sein

genau deswegen habe ich im Forum geschrieben

[PhoenixCR]

Komisch, ohne etwas zu machen, geht der load wieder runter und läuft der io weiter

top - 17:45:03 up 11:02,  1 user,  load average: 0.27, 0.31, 0.40

[PhoenixCR]

@crunchip

Es geht sogar bis auf 1,98 hoch.
Ich finde aber keine Ursache dafür.
Komisch ist, dass genau da (21:08-21:11-21:22), fehlt auch der log.

2022-12-29 21:08:10.905  - info: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105
2022-12-29 21:08:12.461  - info: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 
2022-12-29 21:08:16.867  - info: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105
2022-12-29 21:08:18.381  - info: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 
2022-12-29 21:08:23.379  - info: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105
2022-12-29 21:08:24.953  - info: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 
2022-12-29 21:08:27.273  - info: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105
2022-12-29 21:08:28.771  - info: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 
2022-12-29 21:08:32.911  - info: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105
2022-12-29 21:08:34.507  - info: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 
2022-12-29 21:08:39.173  - info: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105
2022-12-29 21:08:40.721  - info: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 
2022-12-29 21:11:31.252  - info: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 javascript
2022-12-29 21:22:03.705  - warn: ds18b20.0 (13917) Error reading sensor 28-3c01d075c65f: Error: Read error

[crunchip]

@phoenixcr wenn der Pi gerade "arbeitet"(backup,updates,...etc) geht natürlich der load mal kurzfristig hoch

[Homoran]

@phoenixcr sagte in Admin startet nicht mehr:

Es geht sogar bis auf 1,98 hoch.

1,98 ist bei 4 Kernen gerade mal 50% Last, wenn diese gleich auf alle 4 Kerne verteilt ist.

[PhoenixCR]

Frohes Neues!

Es passiert immer noch.
Bin am Verzweifeln schon.
Etwas in log, verstehe ich nicht.
Hat es eine Bedeutung?

<--- Last few GCs --->

[29672:0x48b3240] 92079701 ms: Scavenge 886.1 (1046.0) -> 885.4 (1046.0) MB, 17.5 / 0.0 ms  (average mu = 0.946, current mu = 0.949) allocation failure 
[29672:0x48b3240] 92079792 ms: Scavenge 886.8 (1046.0) -> 885.9 (1046.0) MB, 29.7 / 0.0 ms  (average mu = 0.946, current mu = 0.949) allocation failure 
[29672:0x48b3240] 92079852 ms: Scavenge 887.2 (1046.0) -> 886.6 (1050.0) MB, 27.5 / 0.0 ms  (average mu = 0.946, current mu = 0.949) allocation failure 


<--- JS stacktrace --->

[PhoenixCR]

Der Iob js controller bleibt beim 93 % hängen. Ich kann es nur mit stop start hinkriegen, dass es weiter läuft.

Was könnte ich noch nachschauen?

[Thomas Braun]

@phoenixcr sagte in Admin startet nicht mehr:

Was könnte ich noch nachschauen?

Ich vermute dass da ein Skript aus dem Ruder läuft. Schau dir die mal näher an.

[PhoenixCR]

@thomas-braun
meinst du im JavaScript?
Ich hab 4 Stück, was soll da schiefgehen?
Ich kann die stoppen und dann nochmal testen.