Admin startet nicht mehr
-
@phoenixcr da fehlt die erste Zeile
-
@crunchip sagte in Admin startet nicht mehr:
@phoenixcr da fehlt die erste Zeile
sorry
chris@homeautomationcretu:~ $ top top - 09:58:15 up 3:16, 1 user, load average: 0.19, 0.40, 0.45 -
@phoenixcr sieht doch gut aus
-
-
@phoenixcr wenn es so bleibt, sollte auch nichts abstürzen.
-
wieder aus
top - 14:11:53 up 7:29, 1 user, load average: 1.54, 0.90, 0.64 Tasks: 168 total, 6 running, 162 sleeping, 0 stopped, 0 zombie %Cpu(s): 4.4 us, 3.3 sy, 0.0 ni, 91.4 id, 0.3 wa, 0.0 hi, 0.7 si, 0.0 st MiB Mem : 7897.9 total, 4814.5 free, 1622.8 used, 1460.6 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 6402.4 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 12707 iobroker 20 0 317684 197820 31240 R 7.9 2.4 51:10.70 iobroker.js-con 13917 iobroker 20 0 188504 72572 31144 S 6.6 0.9 7:22.64 io.ds18b20.0 12749 iobroker 20 0 207932 92456 30960 R 5.3 1.1 14:17.62 io.influxdb.0 724 influxdb 20 0 1145204 141052 28568 S 3.6 1.7 19:10.58 influxd 12985 iobroker 20 0 205832 97900 36008 R 1.7 1.2 12:43.68 io.jarvis.0 16633 iobroker 20 0 194864 79508 31092 R 1.7 1.0 1:55.75 io.modbus.0 12726 iobroker 20 0 397608 208948 36536 S 1.3 2.6 2:54.47 io.admin.0 12768 iobroker 20 0 248732 139212 35984 S 1.3 1.7 9:21.69 io.javascript.0 135 root 20 0 86752 38788 37948 S 1.0 0.5 1:21.27 systemd-journal 12798 iobroker 20 0 261968 150776 36784 S 1.0 1.9 10:56.55 node-red 4282 root 20 0 0 0 0 I 0.7 0.0 0:00.26 kworker/3:3-events_freezable 4376 chris 20 0 11232 3168 2616 R 0.7 0.0 0:00.21 top 12872 iobroker 20 0 190676 74496 31076 R 0.7 0.9 0:56.94 io.modbus.2 13148 iobroker 20 0 190316 68192 31092 S 0.7 0.8 0:26.23 io.sayit.0 13 root 20 0 0 0 0 S 0.3 0.0 0:04.86 ksoftirqd/0 29 root 20 0 0 0 0 S 0.3 0.0 0:01.93 ksoftirqd/3 71 root 0 -20 0 0 0 I 0.3 0.0 0:32.50 kworker/u9:0-brcmf_wq/mmc1:0001:1 94 root -51 0 0 0 0 S 0.3 0.0 1:03.25 irq/62-mmc0 99 root 20 0 0 0 0 S 0.3 0.0 0:29.28 jbd2/sda2-8 397 avahi 20 0 7048 3260 2776 S 0.3 0.0 0:43.51 avahi-daemon 425 root 20 0 26544 3232 2648 S 0.3 0.0 0:24.53 rsyslogd 3438 root 20 0 0 0 0 I 0.3 0.0 0:00.85 kworker/0:0-events 12530 root 20 0 0 0 0 I 0.3 0.0 0:03.95 kworker/u8:0-ext4-rsv-conversion 12805 iobroker 20 0 200348 87792 36512 S 0.3 1.1 0:36.13 io.telegram.0 1 root 20 0 33884 9280 7304 S 0.0 0.1 0:05.87 systemd 2 root 20 0 0 0 0 S 0.0 0.0 0:00.03 kthreadd 3 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_gp 4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 rcu_par_gp 5 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 slub_flushwq 6 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 netns 8 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/0:0H-kblockd 10 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 mm_percpu_wq 11 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_tasks_rude_ 12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_tasks_trace 14 root 20 0 0 0 0 I 0.0 0.0 0:28.97 rcu_sched 15 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/0 16 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/0 17 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/1 18 root rt 0 0 0 0 S 0.0 0.0 0:00.02 migration/1 19 root 20 0 0 0 0 S 0.0 0.0 0:01.96 ksoftirqd/1 21 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/1:0H-kblockd 22 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/2 23 root rt 0 0 0 0 S 0.0 0.0 0:00.01 migration/2 24 root 20 0 0 0 0 S 0.0 0.0 0:01.84 ksoftirqd/2 26 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/2:0H-events_highpri 27 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/3 28 root rt 0 0 0 0 S 0.0 0.0 0:00.03 migration/3 31 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/3:0H-kblockd 32 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs 33 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 inet_frag_wq 38 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kauditd 39 root 20 0 0 0 0 S 0.0 0.0 0:00.02 khungtaskd 40 root 20 0 0 0 0 S 0.0 0.0 0:00.00 oom_reaper 41 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 writeback 42 root 20 0 0 0 0 S 0.0 0.0 0:01.65 kcompactd0 65 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kblockd -
-
@phoenixcr da muss dann etwas anderes faul sein
-
@thomas-braun sagte in Admin startet nicht mehr:
Was steht in
dmesg -Tso drin?
Sorry, habs hier reinkopiert, da ich mich nicht auskenne.
Booting Linux on physical CPU 0x0 Linux version 5.15.76-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1597 SMP Fri Nov 4 12:14:58 GMT 2022 CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 random: crng init done Memory policy: Data cache writealloc Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Zone ranges: DMA [mem 0x0000000000000000-0x000000002fffffff] Normal empty HighMem [mem 0x0000000030000000-0x00000001ffffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x000000003b2fffff] node 0: [mem 0x0000000040000000-0x00000000fbffffff] node 0: [mem 0x0000000100000000-0x00000001ffffffff] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] On node 0, zone HighMem: 256 pages in unavailable ranges percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536 pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists, mobility grouping on. Total pages: 2059328 Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:24:48:2F vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=ttyS0,115200 console=tty1 root=PARTUUID=13a628e6-02 rootfstype=ext4 fsck.repair=yes rootwait Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off software IO TLB: mapped [mem 0x0000000012400000-0x0000000016400000] (64MB) Memory: 7757740K/8244224K available (10240K kernel code, 1386K rwdata, 3308K rodata, 2048K init, 591K bss, 158804K reserved, 327680K cma-reserved, 7457792K highmem) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 ftrace: allocating 35511 entries in 105 pages ftrace: allocated 105 pages with 4 groups trace event string verifier disabled rcu: Hierarchical RCU implementation. Rude variant of Tasks RCU enabled. Tracing variant of Tasks RCU enabled. rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 GIC: Using split EOI/Deactivate mode irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) arch_timer: cp15 timer(s) running at 54.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns Switching to timer-based delay loop, resolution 18ns Console: colour dummy device 80x30 printk: console [tty1] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) pid_max: default: 32768 minimum: 301 LSM: Security Framework initializing Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) cgroup: Disabling memory control group subsystem CPU: Testing write buffer coherency: ok CPU0: Spectre BHB: enabling loop workaround for all CPUs CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x200000 - 0x20003c rcu: Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 smp: Brought up 1 node, 4 CPUs SMP: Total of 4 processors activated (432.00 BogoMIPS). CPU: All CPU(s) started in HYP mode. CPU: Virtualization extensions available. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 1024 (order: 4, 65536 bytes, linear) pinctrl core: initialized pinctrl subsystem NET: Registered PF_NETLINK/PF_ROUTE protocol family DMA: preallocated 1024 KiB pool for atomic coherent allocations audit: initializing netlink subsys (disabled) audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 thermal_sys: Registered thermal governor 'step_wise' hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. Serial: AMBA PL011 UART driver bcm2835-mbox fe00b880.mailbox: mailbox enabled raspberrypi-firmware soc:firmware: Attached to firmware from 2022-10-26T11:09:05, variant start raspberrypi-firmware soc:firmware: Firmware hash is c72ad6b26ff40c91ef776b847436094ee63fabee Kprobes globally optimized bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usb_phy_generic phy: supply vcc not found, using dummy regulator usb_phy_generic phy: dummy supplies not allowed for exclusive requests pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered clocksource: Switched to clocksource arch_sys_counter VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered PF_INET protocol family IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes, linear) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) NET: Registered PF_UNIX/PF_LOCAL protocol family RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=21 bucket_order=7 zbud: loaded FS-Cache: Netfs 'nfs' registered for caching NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... Key type asymmetric registered Asymmetric key parser 'x509' registered bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) io scheduler mq-deadline registered io scheduler kyber registered brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 pci 0000:00:00.0: PME# supported from D0 D3hot PCI: bus0: Fast back to back transfers disabled pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] pci 0000:01:00.0: PME# supported from D0 D3hot PCI: bus1: Fast back to back transfers disabled pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] pcieport 0000:00:00.0: enabling device (0140 -> 0142) pcieport 0000:00:00.0: PME: Signaling with IRQ 77 iproc-rng200 fe104000.rng: hwrng registered vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 brd: module loaded loop: module loaded Loading iSCSI transport class v2.0-870. bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus usbcore: registered new interface driver r8152 usbcore: registered new interface driver lan78xx usbcore: registered new interface driver smsc95xx xhci_hcd 0000:01:00.0: xHCI Host Controller xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000740000000890 xhci_hcd 0000:01:00.0: xHCI Host Controller xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: xHCI Host Controller usb usb1: Manufacturer: Linux 5.15.76-v7l+ xhci-hcd usb usb1: SerialNumber: 0000:01:00.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 5.15.76-v7l+ xhci-hcd usb usb2: SerialNumber: 0000:01:00.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected dwc_otg: version 3.00a 10-AUG-2012 (platform bus) dwc_otg: FIQ enabled dwc_otg: NAK holdoff enabled dwc_otg: FIQ split-transaction FSM enabled Module dwc_common_port init usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs hid: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver Initializing XFRM netlink socket NET: Registered PF_PACKET protocol family Key type dns_resolver registered Registering SWP/SWPB emulation handler registered taskstats version 1 Loading compiled-in X.509 certificates Key type ._fscrypt registered Key type .fscrypt registered Key type fscrypt-provisioning registered uart-pl011 fe201000.serial: there is not valid maps for state default uart-pl011 fe201000.serial: cts_event_workaround enabled fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 mmc-bcm2835 fe300000.mmcnr: DMA channel allocated of_cfs_init of_cfs_init: OK mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA Waiting for root device PARTUUID=13a628e6-02... mmc1: new high speed SDIO card at address 0001 usb 1-1: new high-speed USB device number 2 using xhci_hcd usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: USB2.0 Hub hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd usb 2-2: New USB device found, idVendor=2109, idProduct=0711, bcdDevice= 5.07 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: External USB 3.0 usb 2-2: Manufacturer: Intenso usb 2-2: SerialNumber: 20140730020549 scsi host0: uas scsi 0:0:0:0: Direct-Access Intenso External USB 3.0 5438 PQ: 0 ANSI: 6 sd 0:0:0:0: [sda] 250069676 512-byte logical blocks: (128 GB/119 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. VFS: Mounted root (ext4 filesystem) readonly on device 8:2. devtmpfs: mounted Freeing unused kernel image (initmem) memory: 2048K Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux systemd[1]: System time before build time, advancing clock. NET: Registered PF_INET6 protocol family Segment Routing with IPv6 In-situ OAM (IOAM) with IPv6 systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) systemd[1]: Detected architecture arm. systemd[1]: Set hostname to <homeautomationcretu>. systemd[1]: Queued start job for default target Multi-User System. systemd[1]: Created slice system-getty.slice. systemd[1]: Created slice system-modprobe.slice. systemd[1]: Created slice system-systemd\x2dfsck.slice. systemd[1]: Created slice User and Session Slice. systemd[1]: Started Dispatch Password Requests to Console Directory Watch. systemd[1]: Started Forward Password Requests to Wall Directory Watch. systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. systemd[1]: Reached target Local Encrypted Volumes. systemd[1]: Reached target Paths. systemd[1]: Reached target Slices. systemd[1]: Reached target Swap. systemd[1]: Listening on Syslog Socket. systemd[1]: Listening on fsck to fsckd communication Socket. systemd[1]: Listening on initctl Compatibility Named Pipe. systemd[1]: Listening on Journal Audit Socket. systemd[1]: Listening on Journal Socket (/dev/log). systemd[1]: Listening on Journal Socket. systemd[1]: Listening on udev Control Socket. systemd[1]: Listening on udev Kernel Socket. systemd[1]: Condition check resulted in Huge Pages File System being skipped. systemd[1]: Mounting POSIX Message Queue File System... systemd[1]: Mounting RPC Pipe File System... systemd[1]: Mounting Kernel Debug File System... systemd[1]: Mounting Kernel Trace File System... systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. systemd[1]: Starting Restore / save the current clock... systemd[1]: Starting Set the console keyboard layout... systemd[1]: Starting Create list of static device nodes for the current kernel... systemd[1]: Starting Load Kernel Module configfs... systemd[1]: Starting Load Kernel Module drm... systemd[1]: Starting Load Kernel Module fuse... systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. systemd[1]: Starting File System Check on Root Device... systemd[1]: Starting Journal Service... systemd[1]: Starting Load Kernel Modules... systemd[1]: Starting Coldplug All udev Devices... systemd[1]: Mounted POSIX Message Queue File System. systemd[1]: Mounted RPC Pipe File System. systemd[1]: Mounted Kernel Debug File System. systemd[1]: Mounted Kernel Trace File System. fuse: init (API version 7.34) systemd[1]: Finished Restore / save the current clock. systemd[1]: Finished Create list of static device nodes for the current kernel. systemd[1]: modprobe@configfs.service: Succeeded. systemd[1]: Finished Load Kernel Module configfs. systemd[1]: modprobe@fuse.service: Succeeded. systemd[1]: Finished Load Kernel Module fuse. systemd[1]: Mounting FUSE Control File System... systemd[1]: Mounting Kernel Configuration File System... systemd[1]: Started File System Check Daemon to report status. systemd[1]: Finished Load Kernel Modules. systemd[1]: Starting Apply Kernel Variables... systemd[1]: Mounted Kernel Configuration File System. systemd[1]: Mounted FUSE Control File System. systemd[1]: modprobe@drm.service: Succeeded. systemd[1]: Finished Load Kernel Module drm. systemd[1]: Finished Apply Kernel Variables. systemd[1]: Started Journal Service. EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none. systemd-journald[135]: Received client request to flush runtime journal. Driver for 1-wire Dallas network protocol. gpio-4 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file mc: Linux media interface: v0.10 w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075ef00 crc 42 vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_vc_sm_cma_probe: Videocore shared memory driver [vc_sm_connected_init]: start w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d07591cc crc 6f [vc_sm_connected_init]: installed successfully brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode videodev: Linux video capture interface: v2.00 brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075bc6c crc 27 snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_audio bcm2835_audio: card created with 8 channels w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075095c crc 57 bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 bcm2835-isp bcm2835-isp: Register output node 0 with media controller bcm2835-isp bcm2835-isp: Register capture node 1 with media controller bcm2835-isp bcm2835-isp: Register capture node 2 with media controller bcm2835-isp bcm2835-isp: Register capture node 3 with media controller rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075defc crc 04 bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 rpivid feb10000.codec: Device registered as /dev/video19 bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 bcm2835-isp bcm2835-isp: Register output node 0 with media controller bcm2835-isp bcm2835-isp: Register capture node 1 with media controller bcm2835-isp bcm2835-isp: Register capture node 2 with media controller bcm2835-isp bcm2835-isp: Register capture node 3 with media controller bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp bcm2835-codec bcm2835-codec: Device registered as /dev/video10 bcm2835-codec bcm2835-codec: Loaded V4L2 decode bcm2835-codec bcm2835-codec: Device registered as /dev/video11 bcm2835-codec bcm2835-codec: Loaded V4L2 encode bcm2835-codec bcm2835-codec: Device registered as /dev/video12 bcm2835-codec bcm2835-codec: Loaded V4L2 isp bcm2835-codec bcm2835-codec: Device registered as /dev/video18 bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx bcm2835-codec bcm2835-codec: Device registered as /dev/video31 bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image cfg80211: Loading compiled-in X.509 certificates for regulatory database cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d0758d62 crc 7d cfg80211: loaded regulatory.db is malformed or signature is missing/invalid w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075529e crc 43 brcmfmac: F1 signature read @0x18000000=0x15264345 brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075acd5 crc ca w1_master_driver w1_bus_master1: Attaching one wire slave 28.3c01d075c65f crc 43 sd 0:0:0:0: Attached scsi generic sg0 type 0 usbcore: registered new interface driver brcmfmac brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) Registered IR keymap rc-cec rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) Registered IR keymap rc-cec rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1 vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 vc4-drm gpu: [drm] Cannot find any crtc or sizes 8021q: 802.1Q VLAN Support v1.8 uart-pl011 fe201000.serial: no DMA platform data Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k FS brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) bcmgenet fd580000.ethernet eth0: Link is Down bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Bluetooth: Core ver 2.22 NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: HCI UART driver ver 2.3 Bluetooth: HCI UART protocol H4 registered Bluetooth: HCI UART protocol Three-wire (H5) registered Bluetooth: HCI UART protocol Broadcom registered Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized NET: Registered PF_ALG protocol family cryptd: max_cpu_qlen set to 1000 ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead vc4-drm gpu: [drm] Cannot find any crtc or sizes cam-dummy-reg: disabling chris@homeautomationcretu:~ $ -
@crunchip sagte in Admin startet nicht mehr:
@phoenixcr da muss dann etwas anderes faul sein
genau deswegen habe ich im Forum geschrieben
-
Komisch, ohne etwas zu machen, geht der load wieder runter und läuft der io weiter
top - 17:45:03 up 11:02, 1 user, load average: 0.27, 0.31, 0.40 -
Es geht sogar bis auf 1,98 hoch.
Ich finde aber keine Ursache dafür.
Komisch ist, dass genau da (21:08-21:11-21:22), fehlt auch der log.
2022-12-29 21:08:10.905 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:12.461 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:16.867 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:18.381 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:23.379 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:24.953 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:27.273 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:28.771 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:32.911 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:34.507 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:39.173 - [32minfo[39m: admin.0 (12726) ==> Connected system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:08:40.721 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 2022-12-29 21:11:31.252 - [32minfo[39m: admin.0 (12726) <== Disconnect system.user.admin from ::ffff:192.168.1.105 javascript 2022-12-29 21:22:03.705 - [33mwarn[39m: ds18b20.0 (13917) Error reading sensor 28-3c01d075c65f: Error: Read error -
@phoenixcr wenn der Pi gerade "arbeitet"(backup,updates,...etc) geht natürlich der load mal kurzfristig hoch
-
@phoenixcr sagte in Admin startet nicht mehr:
Es geht sogar bis auf 1,98 hoch.
1,98 ist bei 4 Kernen gerade mal 50% Last, wenn diese gleich auf alle 4 Kerne verteilt ist.
-
Frohes Neues!
Es passiert immer noch.
Bin am Verzweifeln schon.
Etwas in log, verstehe ich nicht.
Hat es eine Bedeutung?<--- Last few GCs ---> [29672:0x48b3240] 92079701 ms: Scavenge 886.1 (1046.0) -> 885.4 (1046.0) MB, 17.5 / 0.0 ms (average mu = 0.946, current mu = 0.949) allocation failure [29672:0x48b3240] 92079792 ms: Scavenge 886.8 (1046.0) -> 885.9 (1046.0) MB, 29.7 / 0.0 ms (average mu = 0.946, current mu = 0.949) allocation failure [29672:0x48b3240] 92079852 ms: Scavenge 887.2 (1046.0) -> 886.6 (1050.0) MB, 27.5 / 0.0 ms (average mu = 0.946, current mu = 0.949) allocation failure <--- JS stacktrace ---> -
Der Iob js controller bleibt beim 93 % hängen. Ich kann es nur mit stop start hinkriegen, dass es weiter läuft.
Was könnte ich noch nachschauen?
-
@phoenixcr sagte in Admin startet nicht mehr:
Was könnte ich noch nachschauen?
Ich vermute dass da ein Skript aus dem Ruder läuft. Schau dir die mal näher an.
-
@thomas-braun
meinst du im JavaScript?
Ich hab 4 Stück, was soll da schiefgehen?
Ich kann die stoppen und dann nochmal testen.
-
@phoenixcr sagte in Admin startet nicht mehr:
Ich hab 4 Stück, was soll da schiefgehen?
Mit der Anzahl hat das nix zu tun. Da reicht eine Zeile mit Quatsch drin.
Liegen die etwa in 'global'?
-
In log, steht auch nichts besonderes. Oder?
2023-01-03 18:12:34.728 - [32minfo[39m: admin.0 (6962) terminating http server on port 8081 2023-01-03 18:12:34.719 - [32minfo[39m: info.0 (32343) cleaned everything up... 2023-01-03 18:12:34.731 - [32minfo[39m: backitup.0 (32285) cleaned everything up... 2023-01-03 18:12:34.744 - [32minfo[39m: sayit.0 (415) stopping... 2023-01-03 18:12:34.737 - [32minfo[39m: node-red.0 (12718) kill node-red task 2023-01-03 18:12:34.789 - [32minfo[39m: iot.0 (32366) Connection changed: disconnect 2023-01-03 18:12:34.820 - [32minfo[39m: iot.0 (32366) Connection lost 2023-01-03 18:12:34.754 - [32minfo[39m: javascript.0 (31963) Stop script script.js.Müll_Kopie 2023-01-03 18:12:34.822 - [32minfo[39m: javascript.0 (31963) Stop script script.js.CPU_Last 2023-01-03 18:12:34.837 - [32minfo[39m: javascript.0 (31963) Stop script script.js.TKN 2023-01-03 18:12:34.839 - [32minfo[39m: javascript.0 (31963) Stop script script.js.WM_Fertig_OK 2023-01-03 18:12:35.259 - [33mwarn[39m: web.0 (568) Timeout by termination of web-extensions! 2023-01-03 18:12:35.274 - [32minfo[39m: web.0 (568) terminated http server on port 8082 2023-01-03 18:12:36.224 - [32minfo[39m: modbus.2 (32094) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.216 - [32minfo[39m: tankerkoenig.0 (496) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.237 - [32minfo[39m: iot.0 (32366) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.250 - [32minfo[39m: modbus.0 (3211) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.244 - [32minfo[39m: telegram.0 (19032) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.255 - [32minfo[39m: javascript.0 (31963) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.231 - [32minfo[39m: net-tools.0 (32529) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.223 - [32minfo[39m: text2command.0 (546) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.259 - [32minfo[39m: info.0 (32343) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.262 - [32minfo[39m: backitup.0 (32285) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.264 - [32minfo[39m: sayit.0 (415) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.271 - [32minfo[39m: admin.0 (6962) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.276 - [32minfo[39m: node-red.0 (12718) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.281 - [32minfo[39m: web.0 (568) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.255 - [32minfo[39m: discovery.0 (32270) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.277 - [32minfo[39m: rpi2.0 (32109) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:36.720 - [32minfo[39m: node-red.0 (12733) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:40.766 - [32minfo[39m: tuya.0 (32255) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason 2023-01-03 18:12:45.820 - [32minfo[39m: influxdb.0 (31952) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
