UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@skb

Ja, allerdings die 64bit-Version vom RaspberryOS 'Bullseye'.

[Thomas Braun]

@skb

Kann aber auch nicht an 32bit liegen, denn auf meinem Notfallsystem baut canvas auch mit 32 Bit intus:

pi@mysterium:~ $ uname -a
Linux mysterium 5.15.32-v7l+ #1538 SMP Thu Mar 31 19:39:41 BST 2022 armv7l GNU/Linux
pi@mysterium:~ $ cd /opt/iobroker/
pi@mysterium:/opt/iobroker $ npm ls canvas
iobroker.inst@3.0.0 /opt/iobroker
├─┬ iobroker.echarts@1.0.12
│ ├── canvas@2.9.3
│ └─┬ jsdom@19.0.0
│   └── canvas@2.9.3 deduped
├─┬ iobroker.iot@1.11.8
│ └── canvas@2.9.3 deduped
└─┬ iobroker.mihome-vacuum@3.4.2
  └── canvas@2.9.3 deduped

pi@mysterium:/opt/iobroker $ npm install canvas

up to date in 7s

68 packages are looking for funding
  run `npm fund` for details
pi@mysterium:/opt/iobroker $ npm ls canvas
iobroker.inst@3.0.0 /opt/iobroker
├── canvas@2.9.3
├─┬ iobroker.echarts@1.0.12
│ ├── canvas@2.9.3 deduped
│ └─┬ jsdom@19.0.0
│   └── canvas@2.9.3 deduped
├─┬ iobroker.iot@1.11.8
│ └── canvas@2.9.3 deduped
└─┬ iobroker.mihome-vacuum@3.4.2
  └── canvas@2.9.3 deduped

pi@mysterium:/opt/iobroker $

[SKB]

@thomas-braun Habe jetzt das System mal auf 64-Bit gezogen - dennoch kommt immer die Meldung, dass das Modul 'object'assign fehlt.

Auch denke ich, das Canvas mit Node16 irgendwie nicht so richtig installiert werden kann.

[Thomas Braun]

@skb sagte in Canvas Installation mit Node16 auf R4 nicht möglich:

Auch denke ich, das Canvas mit Node16 irgendwie nicht so richtig installiert werden kann.

Hier geht es. Und mit node18 auch.

[SKB]

@thomas-braun Sollte ich vielleicht von Node 16 auf Node 18 gehen?
Vielleicht wird das object-assign repariert?

[Thomas Braun]

@skb

Vermutlich nicht. Da wird der Fehler woanders liegen. Ich weiß aber nicht wo, tut mir leid.

[SKB]

@thomas-braun Danke für die Einschätzung.

Hättest Du noch eine Idee, wo ich schauen könnte?

Wenn es ja bei Anderen geht, muss es ja insgesamt gehen...

[Thomas Braun]

@skb

Was passiert denn, wenn du ganz simpel

npm install canvas

in /opt/iobroker ausführst?

[SKB]

@thomas-braun Ganz simpel dieses:

pi@ioBroker:/opt/iobroker $ npm install canvas
npm WARN skipping integrity check for git dependency ssh://git@github.com/SKB-CGN/ioBroker.wallbox.git
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/canvas
npm ERR! command failed
npm ERR! command sh -c node-pre-gyp install --fallback-to-build --update-binary
npm ERR! Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js clean' (1)
npm ERR! node-pre-gyp info it worked if it ends with ok
npm ERR! node-pre-gyp info using node-pre-gyp@1.0.9
npm ERR! node-pre-gyp info using node@16.16.0 | linux | arm
npm ERR! node-pre-gyp http GET https://github.com/Automattic/node-canvas/releases/download/v2.9.3/canvas-v2.9.3-node-v93-linux-glibc-arm.tar.gz
npm ERR! node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.9.3/canvas-v2.9.3-node-v93-linux-glibc-arm.tar.gz
npm ERR! node-pre-gyp WARN Pre-built binaries not installable for canvas@2.9.3 and node@16.16.0 (node-v93 ABI, glibc) (falling back to source compile with node-gyp)
npm ERR! node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.9.3/canvas-v2.9.3-node-v93-linux-glibc-arm.tar.gz
npm ERR! node:internal/modules/cjs/loader:936
npm ERR!   throw err;
npm ERR!   ^
npm ERR!
npm ERR! Error: Cannot find module 'object-assign'
npm ERR! Require stack:
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js
npm ERR!     at Function.Module._resolveFilename (node:internal/modules/cjs/loader:933:15)
npm ERR!     at Function.Module._load (node:internal/modules/cjs/loader:778:27)
npm ERR!     at Module.require (node:internal/modules/cjs/loader:1005:19)
npm ERR!     at require (node:internal/modules/cjs/helpers:102:18)
npm ERR!     at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)
npm ERR!     at Module._compile (node:internal/modules/cjs/loader:1105:14)
npm ERR!     at Object.Module._extensions..js (node:internal/modules/cjs/loader:1159:10)
npm ERR!     at Module.load (node:internal/modules/cjs/loader:981:32)
npm ERR!     at Function.Module._load (node:internal/modules/cjs/loader:822:12)
npm ERR!     at Module.require (node:internal/modules/cjs/loader:1005:19) {
npm ERR!   code: 'MODULE_NOT_FOUND',
npm ERR!   requireStack: [
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'
npm ERR!   ]
npm ERR! }
npm ERR! node-pre-gyp ERR! build error
npm ERR! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js clean' (1)
npm ERR! node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/@mapbox/node-pre-gyp/lib/util/compile.js:89:23)
npm ERR! node-pre-gyp ERR! stack     at ChildProcess.emit (node:events:527:28)
npm ERR! node-pre-gyp ERR! stack     at maybeClose (node:internal/child_process:1092:16)
npm ERR! node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:302:5)
npm ERR! node-pre-gyp ERR! System Linux 5.10.103-v8+
npm ERR! node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build" "--update-binary"
npm ERR! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
npm ERR! node-pre-gyp ERR! node -v v16.16.0
npm ERR! node-pre-gyp ERR! node-pre-gyp -v v1.0.9
npm ERR! node-pre-gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-07-23T20_08_48_029Z-debug-0.log

[Thomas Braun]

@skb sagte in Canvas Installation mit Node16 auf R4 nicht möglich:

Das sieht ganz ähnlich aus:

https://github.com/Automattic/node-canvas/issues/2078

Da wird das dann --build-from-source gebaut, denn das funktioniert wohl gerade nicht:
By default, binaries for macOS, Linux and Windows will be downloaded. If you want to build from source, use npm install --build-from-source and see the Compiling section below.

[SKB]

@thomas-braun Ist dann "einfach":

npm install canvas --build-from-source

?

[Thomas Braun]

@skb

Ich vermute ja. Ich hab das auch noch nie selber gebastelt.
Die dev-Files hast du?

sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

[anno171986]

@skb Hallo, ich habe ein ähnliches Problem:

Cannot find required modules: Error: The module '/opt/iobroker/node_modules/canvas/build/Release/canvas.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 72. This version of Node.js requires NODE_MODULE_VERSION 93. Please try re-compiling or re-installing the module (for instance, using `npm rebuild` or `npm install`).

und wenn ich es versuche neu zu installieren kommen auch Fehler:

pi@raspberrypi:/opt/iobroker$ cd /opt/iobroker/node_modules
pi@raspberrypi:/opt/iobroker/node_modules$ npm install canvas --build-from-source
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/canvas
npm ERR! command failed
npm ERR! command sh /tmp/install-ab819b46.sh
npm ERR! Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js clean' (1)
npm ERR! node-pre-gyp info it worked if it ends with ok
npm ERR! node-pre-gyp info using node-pre-gyp@1.0.10
npm ERR! node-pre-gyp info using node@16.17.1 | linux | arm
npm ERR! node-pre-gyp info build requesting source compile
npm ERR! node:internal/modules/cjs/loader:959
npm ERR!   throw err;
npm ERR!   ^
npm ERR!
npm ERR! Error: Cannot find module 'object-assign'
npm ERR! Require stack:
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js
npm ERR!     at Function.Module._resolveFilename (node:internal/modules/cjs/loader:956:15)
npm ERR!     at Function.Module._load (node:internal/modules/cjs/loader:804:27)
npm ERR!     at Module.require (node:internal/modules/cjs/loader:1028:19)
npm ERR!     at require (node:internal/modules/cjs/helpers:102:18)
npm ERR!     at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)
npm ERR!     at Module._compile (node:internal/modules/cjs/loader:1126:14)
npm ERR!     at Object.Module._extensions..js (node:internal/modules/cjs/loader:1180:10)
npm ERR!     at Module.load (node:internal/modules/cjs/loader:1004:32)
npm ERR!     at Function.Module._load (node:internal/modules/cjs/loader:839:12)
npm ERR!     at Module.require (node:internal/modules/cjs/loader:1028:19) {
npm ERR!   code: 'MODULE_NOT_FOUND',
npm ERR!   requireStack: [
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'
npm ERR!   ]
npm ERR! }
npm ERR! node-pre-gyp ERR! build error
npm ERR! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js clean' (1)
npm ERR! node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/@mapbox/node-pre-gyp/lib/util/compile.js:89:23)
npm ERR! node-pre-gyp ERR! stack     at ChildProcess.emit (node:events:513:28)
npm ERR! node-pre-gyp ERR! stack     at maybeClose (node:internal/child_process:1093:16)
npm ERR! node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:302:5)
npm ERR! node-pre-gyp ERR! System Linux 5.10.103-v7l+
npm ERR! node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build" "--update-binary"
npm ERR! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
npm ERR! node-pre-gyp ERR! node -v v16.17.1
npm ERR! node-pre-gyp ERR! node-pre-gyp -v v1.0.10
npm ERR! node-pre-gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2022-11-17T21_24_58_078Z-debug-0.log

Konntest du dein Problem lösen?

[MCU]

@anno171986
https://github.com/Automattic/node-canvas/issues/1879

[anno171986]

@mcu HAbe ich auch schon gesehen. Weiß aber nicht wie ich das Modul löschen soll und was das für Auswirkungen haben kann