Canvas Installation mit Node16 auf R4 nicht möglich

SKB

pi@ioBroker:/opt/iobroker $ dpkg -L nodejs | grep render-template.js
/usr/lib/node_modules/npm/node_modules/gauge/lib/render-template.js

Thomas Braun

@skb

Hab gerade mal auf meinem System probiert:

echad@chet:/opt/iobroker $ npm install canvas

up to date in 8s

71 packages are looking for funding
  run `npm fund` for details
echad@chet:/opt/iobroker $
echad@chet:/opt/iobroker $ npm ls canvas
iobroker.inst@3.0.0 /opt/iobroker
├── canvas@2.9.3
├─┬ iobroker.echarts@1.0.12
│ ├── canvas@2.9.3 deduped
│ └─┬ jsdom@19.0.0
│   └── canvas@2.9.3 deduped
├─┬ iobroker.iot@1.11.9
│ └── canvas@2.9.3 deduped
└─┬ iobroker.mihome-vacuum@3.6.0
  └── canvas@2.9.3 deduped

SKB

@thomas-braun Läufst Du auch auf einem Pi?

Denn da soll es wohl immer mal Probleme geben, weil keine vor-kompilierten Pakete verfügbar sind.

Ich habe auch die zugehörigen Pakete von apt-get installiert.

sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

Leider geht die Installation von Canvas immer noch erfolglos ...

Thomas Braun

@skb

Ja, allerdings die 64bit-Version vom RaspberryOS 'Bullseye'.

Thomas Braun

@skb

Kann aber auch nicht an 32bit liegen, denn auf meinem Notfallsystem baut canvas auch mit 32 Bit intus:

pi@mysterium:~ $ uname -a
Linux mysterium 5.15.32-v7l+ #1538 SMP Thu Mar 31 19:39:41 BST 2022 armv7l GNU/Linux
pi@mysterium:~ $ cd /opt/iobroker/
pi@mysterium:/opt/iobroker $ npm ls canvas
iobroker.inst@3.0.0 /opt/iobroker
├─┬ iobroker.echarts@1.0.12
│ ├── canvas@2.9.3
│ └─┬ jsdom@19.0.0
│   └── canvas@2.9.3 deduped
├─┬ iobroker.iot@1.11.8
│ └── canvas@2.9.3 deduped
└─┬ iobroker.mihome-vacuum@3.4.2
  └── canvas@2.9.3 deduped

pi@mysterium:/opt/iobroker $ npm install canvas

up to date in 7s

68 packages are looking for funding
  run `npm fund` for details
pi@mysterium:/opt/iobroker $ npm ls canvas
iobroker.inst@3.0.0 /opt/iobroker
├── canvas@2.9.3
├─┬ iobroker.echarts@1.0.12
│ ├── canvas@2.9.3 deduped
│ └─┬ jsdom@19.0.0
│   └── canvas@2.9.3 deduped
├─┬ iobroker.iot@1.11.8
│ └── canvas@2.9.3 deduped
└─┬ iobroker.mihome-vacuum@3.4.2
  └── canvas@2.9.3 deduped

pi@mysterium:/opt/iobroker $

SKB

@thomas-braun Habe jetzt das System mal auf 64-Bit gezogen - dennoch kommt immer die Meldung, dass das Modul 'object'assign fehlt.

Auch denke ich, das Canvas mit Node16 irgendwie nicht so richtig installiert werden kann.

Thomas Braun

@skb sagte in Canvas Installation mit Node16 auf R4 nicht möglich:

Auch denke ich, das Canvas mit Node16 irgendwie nicht so richtig installiert werden kann.

Hier geht es. Und mit node18 auch.

SKB

@thomas-braun Sollte ich vielleicht von Node 16 auf Node 18 gehen?
Vielleicht wird das object-assign repariert?

Thomas Braun

@skb

Vermutlich nicht. Da wird der Fehler woanders liegen. Ich weiß aber nicht wo, tut mir leid.

SKB

@thomas-braun Danke für die Einschätzung.

Hättest Du noch eine Idee, wo ich schauen könnte?

Wenn es ja bei Anderen geht, muss es ja insgesamt gehen...

Thomas Braun

@skb

Was passiert denn, wenn du ganz simpel

npm install canvas

in /opt/iobroker ausführst?

SKB

@thomas-braun Ganz simpel dieses:

pi@ioBroker:/opt/iobroker $ npm install canvas
npm WARN skipping integrity check for git dependency ssh://git@github.com/SKB-CGN/ioBroker.wallbox.git
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/canvas
npm ERR! command failed
npm ERR! command sh -c node-pre-gyp install --fallback-to-build --update-binary
npm ERR! Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js clean' (1)
npm ERR! node-pre-gyp info it worked if it ends with ok
npm ERR! node-pre-gyp info using node-pre-gyp@1.0.9
npm ERR! node-pre-gyp info using node@16.16.0 | linux | arm
npm ERR! node-pre-gyp http GET https://github.com/Automattic/node-canvas/releases/download/v2.9.3/canvas-v2.9.3-node-v93-linux-glibc-arm.tar.gz
npm ERR! node-pre-gyp ERR! install response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.9.3/canvas-v2.9.3-node-v93-linux-glibc-arm.tar.gz
npm ERR! node-pre-gyp WARN Pre-built binaries not installable for canvas@2.9.3 and node@16.16.0 (node-v93 ABI, glibc) (falling back to source compile with node-gyp)
npm ERR! node-pre-gyp WARN Hit error response status 404 Not Found on https://github.com/Automattic/node-canvas/releases/download/v2.9.3/canvas-v2.9.3-node-v93-linux-glibc-arm.tar.gz
npm ERR! node:internal/modules/cjs/loader:936
npm ERR!   throw err;
npm ERR!   ^
npm ERR!
npm ERR! Error: Cannot find module 'object-assign'
npm ERR! Require stack:
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js
npm ERR!     at Function.Module._resolveFilename (node:internal/modules/cjs/loader:933:15)
npm ERR!     at Function.Module._load (node:internal/modules/cjs/loader:778:27)
npm ERR!     at Module.require (node:internal/modules/cjs/loader:1005:19)
npm ERR!     at require (node:internal/modules/cjs/helpers:102:18)
npm ERR!     at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)
npm ERR!     at Module._compile (node:internal/modules/cjs/loader:1105:14)
npm ERR!     at Object.Module._extensions..js (node:internal/modules/cjs/loader:1159:10)
npm ERR!     at Module.load (node:internal/modules/cjs/loader:981:32)
npm ERR!     at Function.Module._load (node:internal/modules/cjs/loader:822:12)
npm ERR!     at Module.require (node:internal/modules/cjs/loader:1005:19) {
npm ERR!   code: 'MODULE_NOT_FOUND',
npm ERR!   requireStack: [
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'
npm ERR!   ]
npm ERR! }
npm ERR! node-pre-gyp ERR! build error
npm ERR! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js clean' (1)
npm ERR! node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/@mapbox/node-pre-gyp/lib/util/compile.js:89:23)
npm ERR! node-pre-gyp ERR! stack     at ChildProcess.emit (node:events:527:28)
npm ERR! node-pre-gyp ERR! stack     at maybeClose (node:internal/child_process:1092:16)
npm ERR! node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:302:5)
npm ERR! node-pre-gyp ERR! System Linux 5.10.103-v8+
npm ERR! node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build" "--update-binary"
npm ERR! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
npm ERR! node-pre-gyp ERR! node -v v16.16.0
npm ERR! node-pre-gyp ERR! node-pre-gyp -v v1.0.9
npm ERR! node-pre-gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-07-23T20_08_48_029Z-debug-0.log

Thomas Braun

@skb sagte in Canvas Installation mit Node16 auf R4 nicht möglich:

Das sieht ganz ähnlich aus:

https://github.com/Automattic/node-canvas/issues/2078

Da wird das dann --build-from-source gebaut, denn das funktioniert wohl gerade nicht:
By default, binaries for macOS, Linux and Windows will be downloaded. If you want to build from source, use npm install --build-from-source and see the Compiling section below.

SKB

@thomas-braun Ist dann "einfach":

npm install canvas --build-from-source

?

Thomas Braun

@skb

Ich vermute ja. Ich hab das auch noch nie selber gebastelt.
Die dev-Files hast du?

sudo apt-get install build-essential libcairo2-dev libpango1.0-dev libjpeg-dev libgif-dev librsvg2-dev

anno171986

@skb Hallo, ich habe ein ähnliches Problem:

Cannot find required modules: Error: The module '/opt/iobroker/node_modules/canvas/build/Release/canvas.node' was compiled against a different Node.js version using NODE_MODULE_VERSION 72. This version of Node.js requires NODE_MODULE_VERSION 93. Please try re-compiling or re-installing the module (for instance, using `npm rebuild` or `npm install`).

und wenn ich es versuche neu zu installieren kommen auch Fehler:

pi@raspberrypi:/opt/iobroker$ cd /opt/iobroker/node_modules
pi@raspberrypi:/opt/iobroker/node_modules$ npm install canvas --build-from-source
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/canvas
npm ERR! command failed
npm ERR! command sh /tmp/install-ab819b46.sh
npm ERR! Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js clean' (1)
npm ERR! node-pre-gyp info it worked if it ends with ok
npm ERR! node-pre-gyp info using node-pre-gyp@1.0.10
npm ERR! node-pre-gyp info using node@16.17.1 | linux | arm
npm ERR! node-pre-gyp info build requesting source compile
npm ERR! node:internal/modules/cjs/loader:959
npm ERR!   throw err;
npm ERR!   ^
npm ERR!
npm ERR! Error: Cannot find module 'object-assign'
npm ERR! Require stack:
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js
npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js
npm ERR!     at Function.Module._resolveFilename (node:internal/modules/cjs/loader:956:15)
npm ERR!     at Function.Module._load (node:internal/modules/cjs/loader:804:27)
npm ERR!     at Module.require (node:internal/modules/cjs/loader:1028:19)
npm ERR!     at require (node:internal/modules/cjs/helpers:102:18)
npm ERR!     at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)
npm ERR!     at Module._compile (node:internal/modules/cjs/loader:1126:14)
npm ERR!     at Object.Module._extensions..js (node:internal/modules/cjs/loader:1180:10)
npm ERR!     at Module.load (node:internal/modules/cjs/loader:1004:32)
npm ERR!     at Function.Module._load (node:internal/modules/cjs/loader:839:12)
npm ERR!     at Module.require (node:internal/modules/cjs/loader:1028:19) {
npm ERR!   code: 'MODULE_NOT_FOUND',
npm ERR!   requireStack: [
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',
npm ERR!     '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'
npm ERR!   ]
npm ERR! }
npm ERR! node-pre-gyp ERR! build error
npm ERR! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js clean' (1)
npm ERR! node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/@mapbox/node-pre-gyp/lib/util/compile.js:89:23)
npm ERR! node-pre-gyp ERR! stack     at ChildProcess.emit (node:events:513:28)
npm ERR! node-pre-gyp ERR! stack     at maybeClose (node:internal/child_process:1093:16)
npm ERR! node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:302:5)
npm ERR! node-pre-gyp ERR! System Linux 5.10.103-v7l+
npm ERR! node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build" "--update-binary"
npm ERR! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/canvas
npm ERR! node-pre-gyp ERR! node -v v16.17.1
npm ERR! node-pre-gyp ERR! node-pre-gyp -v v1.0.10
npm ERR! node-pre-gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2022-11-17T21_24_58_078Z-debug-0.log

Konntest du dein Problem lösen?

MCU

@anno171986
https://github.com/Automattic/node-canvas/issues/1879

anno171986

@mcu HAbe ich auch schon gesehen. Weiß aber nicht wie ich das Modul löschen soll und was das für Auswirkungen haben kann

Community Forum

NEWS

Canvas Installation mit Node16 auf R4 nicht möglich

Support us

594

32.4k

81.6k

1.3m