UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[crunchip]

@dampfgarertests hab nen worx m700plus(wr167e) siehe

[SigiMOE]

@shark hätte auch Interesse an ein paar VIEWS zu dem Thema, hast DU schon was ?

[Hausbaer]

@shark Zwei Zeiten pro Tag habe ich im Script und meiner View realisiert. Zonenauswahl brauche ich nicht, das müsstest du selbst basteln

[denjo]

@jack01 welche wetter icons sind das???

[Hausbaer]

Habt ihr auch das Problem, dass die Zeitpläne nicht mehr funktionieren?

Ich hab schon mehrfach manuelle Zeitpläne in der App erzeugt. Einmalig werden diese durch meine VIS / iobroker überschrieben. Danach werden die Zeitpläne gelöscht, es sind keine mehr vorhanden.

[hsteinme]

@hausbaer sagte in Zeigt her eure Views zum Thema Mähroboter:

Danach werden die Zeitpläne gelöscht,

hast Du über einen Blick in den Objekte-Tab überprüft, ob die Zeitpläne wirklich weg sind oder ob anderswo "nur" ein Anzeigeproblem vorliegt?

Falls wirklich weg: Stell mal den Log-Level Deiner worx Instanz auf Debug. Danach kannst Du im Log sehen, welche Werte der Mäher schickt. Insbesondere kannst Du auch die Zeitpläne sehen. Durch Fleißarbeit kannst Du dann feststellen, ab wann die Zeitpläne verschwunden sind. Mit diesem zeitlichen Hinweis kannst Du dann eventuell die Ursachenforschung gezielter angehen.

[Hausbaer]

@hsteinme
Die Zeitpläne in den Objekten sind immer vorhanden gewesen.
Nur: Wenn ich in die App gehe, sind die Zeitpläne regelmäßig verschwunden, die Felder ausgegraut.
Und komisch: Verhalten bei beiden Mähern gleich.

Allerdings ist ein Landi derzeit wohl offline, das werde ich heute abend prüfen.
Beim anderen Worx lief der Start - nachdem ich heute morgen händisch über die App wieder Zeiten zugewiesen haben - problemlos.

Hier das Log in der betroffenen Zeit:

Spoiler

worx.0
2022-06-14 09:03:57.129
debug
Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"}

worx.0
2022-06-14 09:02:59.230
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.raw_messages_out" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.228
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.raw_messages_in" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.228
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.messages_out" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.226
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.messages_in" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.226
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.battery_charge_cycles_reset" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.225
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.battery_charge_cycles" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.224
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.blade_work_time_reset" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.223
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.blade_work_time" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.221
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.mower_work_time" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.221
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.distance_covered" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.208
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.lawn_perimeter" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:59.164
info
undefined is not a valid state value for id "worx.0.222222222222222222CV.rawMqtt.weatherdata"

worx.0
2022-06-14 09:02:59.089
debug
Test Status: 1

worx.0
2022-06-14 09:02:59.088
debug
GET MQTT DATA from API: {"cfg":{"id":0,"lg":"it","tm":"09:02:58","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"222222222222222222CV","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"A8032A562A94","fw":3.26,"fwb":1,"bt":{"t":14,"v":19.01,"p":100,"nr":82,"c":0,"m":1},"dmp":[-1.4,-2.1,297.8],"st":{"b":7272,"d":118797,"wt":7917,"bl":98},"ls":1,"le":0,"lz":0,"rsi":-45,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}

worx.0
2022-06-14 09:02:59.087
debug
Worxcloud MQTT get Message for mower Bärbel (222222222222222222CV)

worx.0
2022-06-14 09:02:57.141
debug
Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"}

worx.0
2022-06-14 09:02:18.212
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.raw_messages_out" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.212
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.raw_messages_in" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.212
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.messages_out" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.211
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.messages_in" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.211
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.battery_charge_cycles_reset" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.211
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.battery_charge_cycles" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.210
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.blade_work_time_reset" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.210
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.blade_work_time" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.209
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.mower_work_time" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.209
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.distance_covered" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.206
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.lawn_perimeter" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.199
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.raw_messages_out" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.199
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.raw_messages_in" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.198
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.messages_out" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.198
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.messages_in" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.197
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.battery_charge_cycles_reset" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.197
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.battery_charge_cycles" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.197
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.blade_work_time_reset" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.196
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.blade_work_time" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.196
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.mower_work_time" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.195
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.distance_covered" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:18.193
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.lawn_perimeter" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.173
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.raw_messages_out" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.172
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.raw_messages_in" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.171
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.messages_out" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.170
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.messages_in" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.169
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.battery_charge_cycles_reset" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.168
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.battery_charge_cycles" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.167
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.blade_work_time_reset" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.166
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.blade_work_time" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.165
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.mower_work_time" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.164
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.distance_covered" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:15.159
info
State value to set for "worx.0.222222222222222222CV.rawMqtt.raw.lawn_perimeter" has to be stringified but received type "number"

worx.0
2022-06-14 09:02:14.979
info
undefined is not a valid state value for id "worx.0.222222222222222222CV.rawMqtt.weatherdata"

worx.0
2022-06-14 09:02:14.955
info
undefined is not a valid state value for id "worx.0.222222222222222222CV.rawMqtt.weatherdata"

worx.0
2022-06-14 09:02:14.746
info
undefined is not a valid state value for id "worx.0.222222222222222222CV.rawMqtt.weatherdata"

worx.0
2022-06-14 09:02:14.664
debug
Test Status: 1

worx.0
2022-06-14 09:02:14.663
debug
GET MQTT DATA from API: {"cfg":{"id":0,"lg":"it","tm":"09:01:59","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"222222222222222222CV","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"A8032A562A94","fw":3.26,"fwb":1,"bt":{"t":13.9,"v":19,"p":100,"nr":82,"c":0,"m":1},"dmp":[-1.4,-2.1,297.8],"st":{"b":7272,"d":118797,"wt":7917,"bl":98},"ls":1,"le":0,"lz":0,"rsi":-45,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}

worx.0
2022-06-14 09:02:14.662
debug
Worxcloud MQTT get Message for mower Bärbel (222222222222222222CV)

worx.0
2022-06-14 09:02:14.592
debug
Test Status: 1

worx.0
2022-06-14 09:02:14.591
debug
GET MQTT DATA from API: {"cfg":{"id":0,"lg":"it","tm":"09:01:59","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"222222222222222222CV","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"A8032A562A94","fw":3.26,"fwb":1,"bt":{"t":13.9,"v":19,"p":100,"nr":82,"c":0,"m":1},"dmp":[-1.4,-2.1,297.8],"st":{"b":7272,"d":118797,"wt":7917,"bl":98},"ls":1,"le":0,"lz":0,"rsi":-45,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}

worx.0
2022-06-14 09:02:14.590
debug
Worxcloud MQTT get Message for mower Bärbel (222222222222222222CV)

worx.0
2022-06-14 09:02:14.005
debug
Test Status: 1

worx.0
2022-06-14 09:02:14.004
debug
GET MQTT DATA from API: {"cfg":{"id":0,"lg":"it","tm":"09:01:59","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"222222222222222222CV","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"A8032A562A94","fw":3.26,"fwb":1,"bt":{"t":13.9,"v":19,"p":100,"nr":82,"c":0,"m":1},"dmp":[-1.4,-2.1,297.8],"st":{"b":7272,"d":118797,"wt":7917,"bl":98},"ls":1,"le":0,"lz":0,"rsi":-45,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}

worx.0
2022-06-14 09:02:14.003
debug
Worxcloud MQTT get Message for mower Bärbel (222222222222222222CV)

worx.0
2022-06-14 09:01:57.099
debug
Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"}

worx.0
2022-06-14 09:00:57.144
debug
Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"}

worx.0
2022-06-14 09:00:32.405
info
undefined is not a valid state value for id "worx.0.1111111111111111111XY.rawMqtt.weatherdata"

worx.0
2022-06-14 09:00:32.342
debug
Test Status: 7

worx.0
2022-06-14 09:00:32.342
debug
GET MQTT DATA from API: {"cfg":{"id":0,"lg":"it","tm":"09:00:32","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":1,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",210,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"1111111111111111111XY","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"F4CFA2A0F738","fw":3.26,"fwb":1,"bt":{"t":12.4,"v":19.76,"p":100,"nr":298,"c":0,"m":1},"dmp":[-2.2,-4.1,357.4],"st":{"b":35341,"d":704561,"wt":39049,"bl":211},"ls":7,"le":0,"lz":0,"rsi":-81,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":132,"l":132}}}

worx.0
2022-06-14 09:00:32.340
debug
Worxcloud MQTT get Message for mower Egon (1111111111111111111XY)

worx.0
2022-06-14 09:00:29.739
info
undefined is not a valid state value for id "worx.0.1111111111111111111XY.rawMqtt.weatherdata"

worx.0
2022-06-14 09:00:29.556
debug
Test Status: 7

worx.0
2022-06-14 09:00:29.555
debug
GET MQTT DATA from API: {"cfg":{"id":0,"lg":"it","tm":"09:00:30","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":1,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",210,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"1111111111111111111XY","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"F4CFA2A0F738","fw":3.26,"fwb":1,"bt":{"t":12.4,"v":19.24,"p":100,"nr":298,"c":0,"m":1},"dmp":[3.7,-4.8,4.9],"st":{"b":35341,"d":704561,"wt":39049,"bl":211},"ls":7,"le":0,"lz":0,"rsi":-81,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":132,"l":132}}}

worx.0
2022-06-14 09:00:29.555
debug
Worxcloud MQTT get Message for mower Egon (1111111111111111111XY)

worx.0
2022-06-14 08:59:57.085
debug
Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"}

worx.0
2022-06-14 08:58:57.032
debug
Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"}

worx.0
2022-06-14 08:57:57.004
debug
Onlinecheck: couldnt get data StatusCodeError: 401 - {"message":"Unauthorized","code":"401.000"}

worx.0
2022-06-14 08:57:08.579
info
undefined is not a valid state value for id "worx.0.1111111111111111111XY.rawMqtt.weatherdata"

worx.0
2022-06-14 08:57:08.507
debug
Test Status: 1

worx.0
2022-06-14 08:57:08.506
debug
GET MQTT DATA from API: {"cfg":{"id":1,"lg":"it","tm":"08:57:09","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":1,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",210,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"1111111111111111111XY","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"F4CFA2A0F738","fw":3.26,"fwb":1,"bt":{"t":11.6,"v":19.76,"p":100,"nr":298,"c":1,"m":1},"dmp":[1.7,-5.1,27.6],"st":{"b":35341,"d":704561,"wt":39049,"bl":211},"ls":1,"le":0,"lz":0,"rsi":-80,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}

worx.0
2022-06-14 08:57:08.505
debug
Worxcloud MQTT get Message for mower Egon (1111111111111111111XY)

worx.0
2022-06-14 08:57:08.036
debug
test cfg: 2 valID: 1 val: 210 sval: 210

worx.0
2022-06-14 08:57:08.035
debug
Worxcloud MQTT sendMessage to 222222222222222222CV Message: {"sc":{"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",210,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}}

worx.0
2022-06-14 08:57:08.035
debug
Mowing time change at d to: {"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",210,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}

worx.0
2022-06-14 08:57:08.034
debug
state change: id_____ worx.0.222222222222222222CV.calendar.tuesday.workTime Mower 222222222222222222CV_____workTime______{"_events":{},"_eventsCount":0,"_maxListeners":100,"serial":"222222222222222222CV","online":true,"raw":{"id":516160,"product_id":49,"user_id":400137,"serial_number":"222222222222222222CV","mac_address":"A8032A562A94","name":"Bärbel","locked":false,"firmware_version":3.26,"firmware_auto_upgrade":false,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":0,"iot_registered":true,"mqtt_registered":true,"pin_code":null,"registered_at":"2022-04-22 00:00:00","online":true,"app_settings":null,"accessories":null,"features":{"provisionable":true,"wifi_pairing":"smartconfig","tracking_firmware":true,"provisioning_replaceable":true,"rain_delay_start":3.08,"mac_address":true,"safe_go_home":3.25,"unrestricted_mowing_time":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"mqtt":true,"display_type":"tube","input_type":"keyboard_tube","lock":true,"pin":true,"rain_delay":true,"chassis":"m_2019","one_time_scheduler":3.15,"scheduler_two_slots":3.15,"auto_lock":3.25,"digital_fence_settings":3.25,"wifi_connection":"smartlink_tube_display","bluetooth_pairing":true},"pending_radio_link_validation":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/A8032A562A94/commandIn","command_out":"PRM100/A8032A562A94/commandOut"},"warranty_registered":false,"purchased_at":null,"warranty_expires_at":null,"setup_location":{"latitude":49.85492329,"longitude":12.44519892},"city":{"id":2905971,"country_id":276,"name":"Hermannsreuth","latitude":49.832111,"longitude":12.47017,"created_at":"2018-02-15 22:24:59","updated_at":"2018-02-15 22:24:59"},"time_zone":"Europe/Berlin","lawn_size":250,"lawn_perimeter":98,"auto_schedule_settings":{"boost":1,"irrigation":null,"soil_type":"silt","grass_type":null,"exclusion_scheduler":{"exclude_nights":true,"days":[{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]}]},"nutrition":null},"auto_schedule":false,"distance_covered":118797,"mower_work_time":7917,"blade_work_time":7272,"blade_work_time_reset":0,"blade_work_time_reset_at":null,"battery_charge_cycles":82,"battery_charge_cycles_reset":0,"battery_charge_cycles_reset_at":null,"messages_in":190,"messages_out":7335,"raw_messages_in":1596,"raw_messages_out":7335,"created_at":"2020-11-17 01:35:01","updated_at":"2022-05-06 01:26:32"},"edgeCut":false,"mqtt_command_in":"PRM100/A8032A562A94/commandIn","mqtt_command_out":"PRM100/A8032A562A94/commandOut","message":{"cfg":{"id":0,"lg":"it","tm":"08:51:22","dt":"14/06/2022","sc":{"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"222222222222222222CV","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"A8032A562A94","fw":3.26,"fwb":1,"bt":{"t":13.4,"v":19.03,"p":100,"nr":82,"c":0,"m":1},"dmp":[-1.4,-2.2,297.8],"st":{"b":7272,"d":118797,"wt":7917,"bl":98},"ls":1,"le":0,"lz":0,"rsi":-45,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}}

worx.0
2022-06-14 08:57:08.017
debug
test cfg: 2 valID: 1 val: 210 sval: 210

worx.0
2022-06-14 08:57:08.017
debug
Worxcloud MQTT sendMessage to 1111111111111111111XY Message: {"sc":{"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",210,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}}

worx.0
2022-06-14 08:57:08.016
debug
Mowing time change at d to: {"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",210,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}

worx.0
2022-06-14 08:57:08.015
debug
state change: id_____ worx.0.1111111111111111111XY.calendar.tuesday.workTime Mower 1111111111111111111XY_____workTime______{"_events":{},"_eventsCount":0,"_maxListeners":100,"serial":"1111111111111111111XY","online":true,"raw":{"id":541690,"product_id":52,"user_id":400137,"serial_number":"1111111111111111111XY","mac_address":"F4CFA2A0F738","name":"Egon","locked":false,"firmware_version":3.26,"firmware_auto_upgrade":true,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":0,"iot_registered":true,"mqtt_registered":true,"pin_code":"AAAA","registered_at":"2021-04-12 00:00:00","online":true,"app_settings":null,"accessories":null,"features":{"provisionable":true,"wifi_pairing":"smartconfig","tracking_firmware":true,"provisioning_replaceable":true,"rain_delay_start":3.08,"mac_address":true,"safe_go_home":3.25,"unrestricted_mowing_time":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"mqtt":true,"display_type":"lcd","input_type":"keyboard_arrow_keys","lock":true,"pin":true,"rain_delay":true,"chassis":"l_2019","one_time_scheduler":3.15,"scheduler_two_slots":3.15,"auto_lock":3.25,"digital_fence_settings":3.25,"wifi_connection":"smartlink_display","bluetooth_pairing":true},"pending_radio_link_validation":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/F4CFA2A0F738/commandIn","command_out":"PRM100/F4CFA2A0F738/commandOut"},"warranty_registered":true,"purchased_at":"2021-04-06 00:00:00","warranty_expires_at":"2024-04-06 00:00:00","setup_location":{"latitude":49.8549685,"longitude":12.44541026},"city":{"id":2905971,"country_id":276,"name":"Hermannsreuth","latitude":49.832111,"longitude":12.47017,"created_at":"2018-02-15 22:24:59","updated_at":"2018-02-15 22:24:59"},"time_zone":"Europe/Berlin","lawn_size":1200,"lawn_perimeter":211,"auto_schedule_settings":{"boost":0,"irrigation":false,"soil_type":"silt","grass_type":"mixed_species","exclusion_scheduler":{"exclude_nights":true,"days":[{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]}]},"nutrition":null},"auto_schedule":false,"distance_covered":704555,"mower_work_time":39049,"blade_work_time":35341,"blade_work_time_reset":7946,"blade_work_time_reset_at":"2021-06-07 06:21:07","battery_charge_cycles":298,"battery_charge_cycles_reset":0,"battery_charge_cycles_reset_at":null,"messages_in":473,"messages_out":29970,"raw_messages_in":9399,"raw_messages_out":29970,"created_at":"2020-12-21 00:59:57","updated_at":"2022-06-03 01:31:33"},"edgeCut":false,"mqtt_command_in":"PRM100/F4CFA2A0F738/commandIn","mqtt_command_out":"PRM100/F4CFA2A0F738/commandOut","message":{"cfg":{"id":1,"lg":"it","tm":"08:57:06","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":1,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"1111111111111111111XY","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"F4CFA2A0F738","fw":3.26,"fwb":1,"bt":{"t":11.7,"v":19.55,"p":100,"nr":298,"c":0,"m":0},"dmp":[1.7,-5.1,27.6],"st":{"b":35341,"d":704561,"wt":39049,"bl":211},"ls":1,"le":0,"lz":0,"rsi":-80,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}}

worx.0
2022-06-14 08:57:05.619
info
undefined is not a valid state value for id "worx.0.1111111111111111111XY.rawMqtt.weatherdata"

worx.0
2022-06-14 08:57:05.509
debug
Test Status: 1

worx.0
2022-06-14 08:57:05.508
debug
GET MQTT DATA from API: {"cfg":{"id":1,"lg":"it","tm":"08:57:06","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":1,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"1111111111111111111XY","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"F4CFA2A0F738","fw":3.26,"fwb":1,"bt":{"t":11.7,"v":19.55,"p":100,"nr":298,"c":0,"m":0},"dmp":[1.7,-5.1,27.6],"st":{"b":35341,"d":704561,"wt":39049,"bl":211},"ls":1,"le":0,"lz":0,"rsi":-80,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}

worx.0
2022-06-14 08:57:05.506
debug
Worxcloud MQTT get Message for mower Egon (1111111111111111111XY)

worx.0
2022-06-14 08:57:05.034
debug
test cfg: 2 valID: 0 val: 09:00 sval: 09:00

worx.0
2022-06-14 08:57:05.034
debug
Worxcloud MQTT sendMessage to 222222222222222222CV Message: {"sc":{"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}}

worx.0
2022-06-14 08:57:05.034
debug
Mowing time change at d to: {"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}

worx.0
2022-06-14 08:57:05.033
debug
h: 09 m: 00

worx.0
2022-06-14 08:57:05.032
debug
state change: id_____ worx.0.222222222222222222CV.calendar.tuesday.startTime Mower 222222222222222222CV_____startTime______{"_events":{},"_eventsCount":0,"_maxListeners":100,"serial":"222222222222222222CV","online":true,"raw":{"id":516160,"product_id":49,"user_id":400137,"serial_number":"222222222222222222CV","mac_address":"A8032A562A94","name":"Bärbel","locked":false,"firmware_version":3.26,"firmware_auto_upgrade":false,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":0,"iot_registered":true,"mqtt_registered":true,"pin_code":null,"registered_at":"2022-04-22 00:00:00","online":true,"app_settings":null,"accessories":null,"features":{"provisionable":true,"wifi_pairing":"smartconfig","tracking_firmware":true,"provisioning_replaceable":true,"rain_delay_start":3.08,"mac_address":true,"safe_go_home":3.25,"unrestricted_mowing_time":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"mqtt":true,"display_type":"tube","input_type":"keyboard_tube","lock":true,"pin":true,"rain_delay":true,"chassis":"m_2019","one_time_scheduler":3.15,"scheduler_two_slots":3.15,"auto_lock":3.25,"digital_fence_settings":3.25,"wifi_connection":"smartlink_tube_display","bluetooth_pairing":true},"pending_radio_link_validation":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/A8032A562A94/commandIn","command_out":"PRM100/A8032A562A94/commandOut"},"warranty_registered":false,"purchased_at":null,"warranty_expires_at":null,"setup_location":{"latitude":49.85492329,"longitude":12.44519892},"city":{"id":2905971,"country_id":276,"name":"Hermannsreuth","latitude":49.832111,"longitude":12.47017,"created_at":"2018-02-15 22:24:59","updated_at":"2018-02-15 22:24:59"},"time_zone":"Europe/Berlin","lawn_size":250,"lawn_perimeter":98,"auto_schedule_settings":{"boost":1,"irrigation":null,"soil_type":"silt","grass_type":null,"exclusion_scheduler":{"exclude_nights":true,"days":[{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]}]},"nutrition":null},"auto_schedule":false,"distance_covered":118797,"mower_work_time":7917,"blade_work_time":7272,"blade_work_time_reset":0,"blade_work_time_reset_at":null,"battery_charge_cycles":82,"battery_charge_cycles_reset":0,"battery_charge_cycles_reset_at":null,"messages_in":190,"messages_out":7335,"raw_messages_in":1596,"raw_messages_out":7335,"created_at":"2020-11-17 01:35:01","updated_at":"2022-05-06 01:26:32"},"edgeCut":false,"mqtt_command_in":"PRM100/A8032A562A94/commandIn","mqtt_command_out":"PRM100/A8032A562A94/commandOut","message":{"cfg":{"id":0,"lg":"it","tm":"08:51:22","dt":"14/06/2022","sc":{"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"222222222222222222CV","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"A8032A562A94","fw":3.26,"fwb":1,"bt":{"t":13.4,"v":19.03,"p":100,"nr":82,"c":0,"m":1},"dmp":[-1.4,-2.2,297.8],"st":{"b":7272,"d":118797,"wt":7917,"bl":98},"ls":1,"le":0,"lz":0,"rsi":-45,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}}

worx.0
2022-06-14 08:57:05.018
debug
test cfg: 2 valID: 0 val: 09:00 sval: 09:00

worx.0
2022-06-14 08:57:05.018
debug
Worxcloud MQTT sendMessage to 1111111111111111111XY Message: {"sc":{"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}}

worx.0
2022-06-14 08:57:05.017
debug
Mowing time change at d to: {"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["09:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}

worx.0
2022-06-14 08:57:05.017
debug
h: 09 m: 00

worx.0
2022-06-14 08:57:05.016
debug
state change: id_____ worx.0.1111111111111111111XY.calendar.tuesday.startTime Mower 1111111111111111111XY_____startTime______{"_events":{},"_eventsCount":0,"_maxListeners":100,"serial":"1111111111111111111XY","online":true,"raw":{"id":541690,"product_id":52,"user_id":400137,"serial_number":"1111111111111111111XY","mac_address":"F4CFA2A0F738","name":"Egon","locked":false,"firmware_version":3.26,"firmware_auto_upgrade":true,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":0,"iot_registered":true,"mqtt_registered":true,"pin_code":"AAAA","registered_at":"2021-04-12 00:00:00","online":true,"app_settings":null,"accessories":null,"features":{"provisionable":true,"wifi_pairing":"smartconfig","tracking_firmware":true,"provisioning_replaceable":true,"rain_delay_start":3.08,"mac_address":true,"safe_go_home":3.25,"unrestricted_mowing_time":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"mqtt":true,"display_type":"lcd","input_type":"keyboard_arrow_keys","lock":true,"pin":true,"rain_delay":true,"chassis":"l_2019","one_time_scheduler":3.15,"scheduler_two_slots":3.15,"auto_lock":3.25,"digital_fence_settings":3.25,"wifi_connection":"smartlink_display","bluetooth_pairing":true},"pending_radio_link_validation":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/F4CFA2A0F738/commandIn","command_out":"PRM100/F4CFA2A0F738/commandOut"},"warranty_registered":true,"purchased_at":"2021-04-06 00:00:00","warranty_expires_at":"2024-04-06 00:00:00","setup_location":{"latitude":49.8549685,"longitude":12.44541026},"city":{"id":2905971,"country_id":276,"name":"Hermannsreuth","latitude":49.832111,"longitude":12.47017,"created_at":"2018-02-15 22:24:59","updated_at":"2018-02-15 22:24:59"},"time_zone":"Europe/Berlin","lawn_size":1200,"lawn_perimeter":211,"auto_schedule_settings":{"boost":0,"irrigation":false,"soil_type":"silt","grass_type":"mixed_species","exclusion_scheduler":{"exclude_nights":true,"days":[{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]}]},"nutrition":null},"auto_schedule":false,"distance_covered":704555,"mower_work_time":39049,"blade_work_time":35341,"blade_work_time_reset":7946,"blade_work_time_reset_at":"2021-06-07 06:21:07","battery_charge_cycles":298,"battery_charge_cycles_reset":0,"battery_charge_cycles_reset_at":null,"messages_in":473,"messages_out":29970,"raw_messages_in":9399,"raw_messages_out":29970,"created_at":"2020-12-21 00:59:57","updated_at":"2022-06-03 01:31:33"},"edgeCut":false,"mqtt_command_in":"PRM100/F4CFA2A0F738/commandIn","mqtt_command_out":"PRM100/F4CFA2A0F738/commandOut","message":{"cfg":{"id":1,"lg":"it","tm":"08:57:03","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":1,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["10:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"1111111111111111111XY","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"F4CFA2A0F738","fw":3.26,"fwb":1,"bt":{"t":11.7,"v":19.55,"p":100,"nr":298,"c":0,"m":0},"dmp":[1.7,-5.1,27.6],"st":{"b":35341,"d":704561,"wt":39049,"bl":211},"ls":1,"le":0,"lz":0,"rsi":-80,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}}

worx.0
2022-06-14 08:57:02.586
info
undefined is not a valid state value for id "worx.0.1111111111111111111XY.rawMqtt.weatherdata"

worx.0
2022-06-14 08:57:02.507
debug
Test Status: 1

worx.0
2022-06-14 08:57:02.506
debug
GET MQTT DATA from API: {"cfg":{"id":1,"lg":"it","tm":"08:57:03","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":1,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["10:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"1111111111111111111XY","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"F4CFA2A0F738","fw":3.26,"fwb":1,"bt":{"t":11.7,"v":19.55,"p":100,"nr":298,"c":0,"m":0},"dmp":[1.7,-5.1,27.6],"st":{"b":35341,"d":704561,"wt":39049,"bl":211},"ls":1,"le":0,"lz":0,"rsi":-80,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}

worx.0
2022-06-14 08:57:02.506
debug
Worxcloud MQTT get Message for mower Egon (1111111111111111111XY)

worx.0
2022-06-14 08:57:02.040
debug
test cfg: 2 valID: 2 val: false sval: 0

worx.0
2022-06-14 08:57:02.039
debug
Worxcloud MQTT sendMessage to 222222222222222222CV Message: {"sc":{"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}}

worx.0
2022-06-14 08:57:02.039
debug
Mowing time change at d to: {"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}

worx.0
2022-06-14 08:57:02.038
debug
state change: id_____ worx.0.222222222222222222CV.calendar.tuesday.borderCut Mower 222222222222222222CV_____borderCut______{"_events":{},"_eventsCount":0,"_maxListeners":100,"serial":"222222222222222222CV","online":true,"raw":{"id":516160,"product_id":49,"user_id":400137,"serial_number":"222222222222222222CV","mac_address":"A8032A562A94","name":"Bärbel","locked":false,"firmware_version":3.26,"firmware_auto_upgrade":false,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":0,"iot_registered":true,"mqtt_registered":true,"pin_code":null,"registered_at":"2022-04-22 00:00:00","online":true,"app_settings":null,"accessories":null,"features":{"provisionable":true,"wifi_pairing":"smartconfig","tracking_firmware":true,"provisioning_replaceable":true,"rain_delay_start":3.08,"mac_address":true,"safe_go_home":3.25,"unrestricted_mowing_time":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"mqtt":true,"display_type":"tube","input_type":"keyboard_tube","lock":true,"pin":true,"rain_delay":true,"chassis":"m_2019","one_time_scheduler":3.15,"scheduler_two_slots":3.15,"auto_lock":3.25,"digital_fence_settings":3.25,"wifi_connection":"smartlink_tube_display","bluetooth_pairing":true},"pending_radio_link_validation":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/A8032A562A94/commandIn","command_out":"PRM100/A8032A562A94/commandOut"},"warranty_registered":false,"purchased_at":null,"warranty_expires_at":null,"setup_location":{"latitude":49.85492329,"longitude":12.44519892},"city":{"id":2905971,"country_id":276,"name":"Hermannsreuth","latitude":49.832111,"longitude":12.47017,"created_at":"2018-02-15 22:24:59","updated_at":"2018-02-15 22:24:59"},"time_zone":"Europe/Berlin","lawn_size":250,"lawn_perimeter":98,"auto_schedule_settings":{"boost":1,"irrigation":null,"soil_type":"silt","grass_type":null,"exclusion_scheduler":{"exclude_nights":true,"days":[{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]},{"exclude_day":false,"slots":[{"start_time":1260,"duration":180,"reason":"generic"},{"start_time":0,"duration":420,"reason":"generic"}]}]},"nutrition":null},"auto_schedule":false,"distance_covered":118797,"mower_work_time":7917,"blade_work_time":7272,"blade_work_time_reset":0,"blade_work_time_reset_at":null,"battery_charge_cycles":82,"battery_charge_cycles_reset":0,"battery_charge_cycles_reset_at":null,"messages_in":190,"messages_out":7335,"raw_messages_in":1596,"raw_messages_out":7335,"created_at":"2020-11-17 01:35:01","updated_at":"2022-05-06 01:26:32"},"edgeCut":false,"mqtt_command_in":"PRM100/A8032A562A94/commandIn","mqtt_command_out":"PRM100/A8032A562A94/commandOut","message":{"cfg":{"id":0,"lg":"it","tm":"08:51:22","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":0,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["10:00",150,0],["09:30",105,0],["00:00",0,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"222222222222222222CV","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"A8032A562A94","fw":3.26,"fwb":1,"bt":{"t":13.4,"v":19.03,"p":100,"nr":82,"c":0,"m":1},"dmp":[-1.4,-2.2,297.8],"st":{"b":7272,"d":118797,"wt":7917,"bl":98},"ls":1,"le":0,"lz":0,"rsi":-45,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}}

worx.0
2022-06-14 08:57:02.026
debug
test cfg: 2 valID: 2 val: false sval: 0

worx.0
2022-06-14 08:57:02.024
debug
Worxcloud MQTT sendMessage to 1111111111111111111XY Message: {"sc":{"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["10:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}}

worx.0
2022-06-14 08:57:02.024
debug
Mowing time change at d to: {"m":1,"distm":0,"p":0,"d":[["00:00",0,0],["00:00",0,0],["10:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]}

worx.0
2022-06-14 08:57:02.022
debug
state change: id_____ worx.0.1111111111111111111XY.calendar.tuesday.borderCut Mower 1111111111111111111XY_____borderCut______{"_events":{},"_eventsCount":0,"_maxListeners":100,"serial":"1111111111111111111XY","online":true,"raw":{"id":541690,"product_id":52,"user_id":400137,"serial_number":"1111111111111111111XY","mac_address":"F4CFA2A0F738","name":"Egon","locked":false,"firmware_version":3.26,"firmware_auto_upgrade":true,"push_notifications":true,"sim":null,"push_notifications_level":"warning","test":0,"iot_registered":true,"mqtt_registered":true,"pin_code":"AAAA","registered_at":"2021-04-12 00:00:00","online":true,"app_settings":null,"accessories":null,"features":{"provisionable":true,"wifi_pairing":"smartconfig","tracking_firmware":true,"provisioning_replaceable":true,"rain_delay_start":3.08,"mac_address":true,"safe_go_home":3.25,"unrestricted_mowing_time":true,"multi_zone":true,"multi_zone_percentage":true,"multi_zone_zones":4,"mqtt":true,"display_type":"lcd","input_type":"keyboard_arrow_keys","lock":true,"pin":true,"rain_delay":true,"chassis":"l_2019","one_time_scheduler":3.15,"scheduler_two_slots":3.15,"auto_lock":3.25,"digital_fence_settings":3.25,"wifi_connection":"smartlink_display","bluetooth_pairing":true},"pending_radio_link_validation":null,"mqtt_endpoint":"iot.eu-west-1.worxlandroid.com","mqtt_topics":{"command_in":"PRM100/F4CFA2A0F738/commandIn","command_out":"PRM100/F4CFA2A0F738/commandOut"},"warranty_registered":true,"purchased_at":"2021-04-06 00:00:00","warranty_expires_at":"2024-04-06 00:00:00","setup_location":{"latitude":49.8549685,"longitude":12.44541026},"city":{"id":2905971,"country_id":276,"name":"Hermannsreuth","latitude":49.832111,"longitude":12.47017,"created_at":"2018-02-15 22:24:59","updated_at":"2018-02-15 22:24:59"},"time_zone":"Europe/Berlin","lawn_size":1200,"lawn_perimeter":211,"auto_schedule_settings":{"boost":0,"irrigation":false,"soil_type":"silt","grass_type":"mixed_species","exclusion_scheduler":{"exclude_nights":true,"days":[{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]},{"exclude_day":false,"slots":[]}]},"nutrition":null},"auto_schedule":false,"distance_covered":704555,"mower_work_time":39049,"blade_work_time":35341,"blade_work_time_reset":7946,"blade_work_time_reset_at":"2021-06-07 06:21:07","battery_charge_cycles":298,"battery_charge_cycles_reset":0,"battery_charge_cycles_reset_at":null,"messages_in":473,"messages_out":29970,"raw_messages_in":9399,"raw_messages_out":29970,"created_at":"2020-12-21 00:59:57","updated_at":"2022-06-03 01:31:33"},"edgeCut":false,"mqtt_command_in":"PRM100/F4CFA2A0F738/commandIn","mqtt_command_out":"PRM100/F4CFA2A0F738/commandOut","message":{"cfg":{"id":0,"lg":"it","tm":"08:51:16","dt":"14/06/2022","sc":{"m":1,"distm":0,"ots":{"bc":1,"wtm":0},"p":0,"d":[["00:00",0,0],["00:00",0,0],["10:00",75,0],["00:00",0,0],["10:00",75,0],["10:00",75,0],["10:00",75,0]],"dd":[["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0],["00:00",0,0]]},"cmd":0,"mz":[0,0,0,0],"mzv":[0,0,0,0,0,0,0,0,0,0],"rd":0,"sn":"1111111111111111111XY","al":{"lvl":0,"t":60},"tq":0},"dat":{"mac":"F4CFA2A0F738","fw":3.26,"fwb":1,"bt":{"t":11.7,"v":19.55,"p":100,"nr":298,"c":0,"m":0},"dmp":[1.7,-5.1,27.6],"st":{"b":35341,"d":704561,"wt":39049,"bl":211},"ls":1,"le":0,"lz":0,"rsi":-84,"lk":0,"act":1,"tr":0,"conn":"wifi","rain":{"s":0,"cnt":0},"time":{"r":0,"l":0}}}}

[hsteinme]

@hausbaer Bitte Logs künftig in gezippten Dateien als Anhang posten.

Das Log zeigt ja noch nicht mal 10 Minuten an. Da kann ich nur sehen, dass Du am 2022-06-14 08:57:02.024 über ioBroker Mähzeiten gesetzt hast, diese um 2022-06-14 08:57:02.039 korrigiert hast, um 2022-06-14 08:57:05.018 erneut korrigiert hast und das anschließend noch dreimal tust. Der Zeitplan ist um 2022-06-14 09:02:59.088 noch vorhanden.

Wer "fummelt" da minutenlang an den Zeitplänen rum? Ein Skript von Dir? Oder die VIS?

[Hausbaer]

@hsteinme Hmm, eigentlich sollte da niemand (oder nichts) so lange drum rumwurschteln....

[hsteinme]

@hausbaer sagte in Zeigt her eure Views zum Thema Mähroboter:

eigentlich sollte da niemand (oder nichts) so lange drum rumwurschteln....

Läuft ein Skript von Dir zu diesem Zeitpunkt? Hast Du zu diesem Zeitpunkt Knöpfchen in einer Mäher-View gedrückt?

[Hausbaer]

@hsteinme
Es läuft halt mein Mäher Script. Die Startzeit ist auf 9:00 eingestellt, die Übertragung (einmal) in Ordnung.
Mehr kann ich erst Montag prüfen, da ich nicht am Rechner bin

[Hausbaer]

Anscheinend ist wohl wirklich das Skript die Ursache.

Ich bin dabei, dieses zu vereinfachen und werde dann erneut testen.

[Hausbaer]

Der "Fehler" liegt wohl an der Übertragung.

Wenn die Startzeit und die Arbeitsdauer zusammen übertragen werden (also ohne Zeitversatz), tritt der Fehler häufig auf.
Ich habe nun die Übertragung 3 min vor dem eigentlichen Start herausgenommen.
Das Übertragen wird nun nur noch durch die Vis gesteuert, in dem man entweder die Zeiten ändert oder eine Zeit deaktiviert.
Übertragen wird mit einem Zeitversatz, die Startzeit mit 1 Sek, die Arbeitsdauer mit 2 Sek., Kantenschnitt ebenfalls mit 1 Sek.

Scheint zu funktionieren.

[hsteinme]

@hausbaer sagte in Zeigt her eure Views zum Thema Mähroboter:

Übertragen wird mit einem Zeitversatz, die Startzeit mit 1 Sek, die Arbeitsdauer mit 2 Sek., Kantenschnitt ebenfalls mit 1 Sek

Das ist genau die Situation, die ich vermutet hatte - und über die ich vor zwei Jahren auch gestolpert war. Ich atte mich damals auch für den Ansatz entschieden, Pausen zwischen den Sendevorgängen einzubauen. Siehe https://forum.iobroker.net/topic/31506/worx-adapter-kalender-änderungen-per-javascript-unwirksam/4

Mittlerweile gibt es aber noch eine andere Möglichkeit, um die Übernahme geänderter Zeiten abzusichern: Unter calendar gibt es die Datenpunkte calJson bzw. calJson2, mit denen Du alle ersten bzw. alle zweiten Zeiten einer Woche auf einen Schlag zum Mäher senden kannst.

Noch ein Hinweis am Rande: Es wäre gut, Du könntest geänderte Zeitpläne spätestens eine halbe Stunde vor vorgesehenem Mähbeginn abschicken. Dann nutzt nämlich der Mäher die halbe Stunde noch, um seinen Akku wieder auf 100% zu laden, sodass Dir dann eine maximale Mähdauer zur Verfügung steht.

[hertob81]

@hsteinme & @Hausbaer

Ich bin zwar kein blutiger Anfänger mehr, aber besteht die Möglichkeit, dass ihr ne Screenshot postet, wo bzw wie ihr das im Blockly abgeändert habt.

Ich habe auch das Problem, das das VIS
über die Mähzeiten "bügelt" und am Ende alles leer bleibt.

Alternativ könnte ich auch damit leben, dass die Zeiten nur "lesend" in der VIS angezeigt werden, allerdings habe ich mich nicht herausgefunden wie ich das realisieren kann.

Mfg Tobias

[hsteinme]

@hertob81 Sorry, hier kann ich Dir leider nicht weiterhelfen, da ich mich weder mit Blockly noch mit der VIS auskenne

[Hausbaer]

@hertob81 sagte in Zeigt her eure Views zum Thema Mähroboter:

@hsteinme & @Hausbaer

Ich bin zwar kein blutiger Anfänger mehr, aber besteht die Möglichkeit, dass ihr ne Screenshot postet, wo bzw wie ihr das im Blockly abgeändert habt.

Ich habe auch das Problem, das das VIS
über die Mähzeiten "bügelt" und am Ende alles leer bleibt.

Alternativ könnte ich auch damit leben, dass die Zeiten nur "lesend" in der VIS angezeigt werden, allerdings habe ich mich nicht herausgefunden wie ich das realisieren kann.

Mfg Tobias

Servus Tobias,

sorry für die späte Antwort. Ich hatte hier längere Zeit kein Auge mehr drauf. Ich werde mir die Sache "calJson" noch ansehen bzw. die Zeiten wieder eine Stunde vor Mähzeitbeginn übertragen lassen.

Ich stell das aktuelle Skript dann zur Verfügung.

[Hausbaer]

Hier das Skript.

Skript_Maehroboter.zip

Zeiten werden nach Änderung UND jeden Tag am Morgen übertragen.

[AKuehnemann73]

@hausbaer
Hi, habe Dein Skript mal installiert und mit meinen Datenpunkten angepasst. Jedoch wird mir kein einziger Datenpunkt gefüllt. Könntest du mal über Dein Skript drüber schauen?
Außerdem müssen alle neu angelegten Datenpunkte überarbeitet werden. Hier haben sich wohl ein paar Fehler eingeschlichen.
z.b. 0.userdata.Mahroboter.Ahornberg...

[AKuehnemann73]

@saeft_2003
Habe Dein Skript jetzt soweit am laufen mit der dazugehörigen vis.
Hätte kurz noch ein paar Fragen.

1. In der vis Klingenlaufzeit, Mähzeit und Distanz wie hast Du die Werte umgerechnet?
   Bei mir sind die Werte in Minuten und Meter hinterlegt.
2. Im Skript "Wechsel 3min oder 40min" wo wird das in der vis eingeschaltet? Oder geht
   die Einstellung nur selber in den Objekten?
3. Wenn ich in der vis die Einschaltzeit und Dauer eintrage werden mir diese Werte
   nicht unter dem Mäher in den Kalender geschrieben. Eine Idee warum?

Danke schon mal für die Mühe