NEWS
Test Adapter OpenKNX 0.6.x
Tester
577
Beiträge
72
Kommentatoren
161.6k
Aufrufe
71
Watching
-
Hier der Start:
openknx.0 2022-04-27 05:52:21.442 debug Datapoint autoread created and GroupValueWrite sent: 1/7/19 openknx.0.Haussteuerung.Rolladen.Rolladen_zentral_C openknx.0 2022-04-27 05:52:21.428 silly [trace] 2022-04-27 03:52:21.427 Binding connection to GroupValue_Response_1/7/19 openknx.0 2022-04-27 05:52:21.420 silly [trace] 2022-04-27 03:52:21.418 resolved DPT1.001 to {"basetype":{"bitlength":1,"valuetype":"basic","desc":"1-bit value"},"subtypes":{"100":{"use":"???","name":"DPT_Heat/Cool","desc":"heat/cool","enc":{"0":"???","1":"???"}},"001":{"use":"G","name":"DPT_Switch","desc":"switch","enc":{"0":"Off","1":"On"}},"002":{"use":"G","name":"DPT_Bool","desc":"bool","enc":{"0":"false","1":"true"}},"003":{"use":"G","name":"DPT_Enable","desc":"enable","enc":{"0":"disable","1":"enable"}},"004":{"use":"FB","name":"DPT_Ramp","desc":"ramp","enc":{"0":"No ramp","1":"Ramp"}},"005":{"use":"FB","name":"DPT_Alarm","desc":"alarm","enc":{"0":"No alarm","1":"Alarm"}},"006":{"use":"FB","name":"DPT_BinaryValue","desc":"binary value","enc":{"0":"Low","1":"High"}},"007":{"use":"FB","name":"DPT_Step","desc":"step","enc":{"0":"Decrease","1":"Increase"}},"008":{"use":"G","name":"DPT_UpDown","desc":"up/down","enc":{"0":"Up","1":"Down"}},"009":{"use":"G","name":"DPT_OpenClose","desc":"open/close","enc":{"0":"Open","1":"Close"}},"010":{"use":"G","name":"DPT_Start","desc":"start/stop","enc":{"0":"Stop","1":"Start"}},"011":{"use":"FB","name":"DPT_State","desc":"state","enc":{"0":"Inactive","1":"Active"}},"012":{"use":"FB","name":"DPT_Invert","desc":"invert","enc":{"0":"Not inverted","1":"inverted"}},"013":{"use":"FB","name":"DPT_DimSendStyle","desc":"dim send style","enc":{"0":"Start/stop","1":"Cyclically"}},"014":{"use":"FB","name":"DPT_InputSource","desc":"input source","enc":{"0":"Fixed","1":"Calculated"}},"015":{"use":"G","name":"DPT_Reset","desc":"reset","enc":{"0":"no action(dummy)","1":"reset command(trigger)"}},"016":{"use":"G","name":"DPT_Ack","desc":"ack","enc":{"0":"no action(dummy)","1":"acknowledge command(trigger)"}},"017":{"use":"G","name":"DPT_Trigger","desc":"trigger","enc":{"0":"trigger","1":"trigger"}},"018":{"use":"G","name":"DPT_Occupancy","desc":"occupancy","enc":{"0":"not occupied","1":"occupied"}},"019":{"use":"G","name":"DPT_WindowDoor","desc":"open window/door","enc":{"0":"closed","1":"open"}},"021":{"use":"FB","name":"DPT_LogicalFunction","desc":"and/or","enc":{"0":"logical function OR","1":"logical function AND"}},"022":{"use":"FB","name":"DPT_Scene_AB","desc":"scene A/B","enc":{"0":"scene A","1":"scene B"}},"023":{"use":"FB","name":"DPT_ShutterBlinds_Mode","desc":"shutter/blinds mode","enc":{"0":"only move Up/Down mode (shutter)","1":"move Up/Down + StepStop mode (blind)"}}},"id":"DPT1","subtypeid":"001","subtype":{"use":"G","name":"DPT_Switch","desc":"switch","enc":{"0":"Off","1":"On"}}} openknx.0 2022-04-27 05:52:21.407 silly [debug] 2022-04-27 03:52:21.406 (idle): zzzz... openknx.0 2022-04-27 05:52:21.401 silly [debug] 2022-04-27 03:52:21.400 --- Connected in ROUTING mode --- openknx.0 2022-04-27 05:52:21.395 silly [debug] 2022-04-27 03:52:21.393 useTunneling=false openknx.0 2022-04-27 05:52:21.384 silly [debug] 2022-04-27 03:52:21.382 IpRoutingConnection 192.168.2.15:3671, adding membership for 224.0.23.12 openknx.0 2022-04-27 05:52:21.351 silly [trace] 2022-04-27 03:52:21.349 candidate interface: tun0 ({"address":"10.8.0.1","netmask":"255.255.255.0","family":"IPv4","mac":"00:00:00:00:00:00","internal":false,"cidr":"10.8.0.1/24"}) openknx.0 2022-04-27 05:52:21.346 silly [trace] 2022-04-27 03:52:21.344 candidate interface: eth0 ({"address":"192.168.2.15","netmask":"255.255.255.0","family":"IPv4","mac":"02:81:0b:01:d3:12","internal":false,"cidr":"192.168.2.15/24"}) openknx.0 2022-04-27 05:52:21.322 silly [debug] 2022-04-27 03:52:21.314 initializing multicast connection to 224.0.23.12 openknx.0 2022-04-27 05:52:21.262 silly States user redis pmessage io.openknx.0.*/io.openknx.0.info.connection:{"val":false,"ack":true,"ts":1651031541162,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031541162} openknx.0 2022-04-27 05:52:21.178 silly States system redis pmessage io.system.adapter.openknx.0.logLevel/io.system.adapter.openknx.0.logLevel:{"val":"silly","ack":true,"ts":1651031540956,"q":0,"from":"system.adapter.openknx.0","lc":1650776678514} openknx.0 2022-04-27 05:52:20.925 info /opt/iobroker/node_modules/iobroker.js-controller openknx.0 2022-04-27 05:52:20.913 info Connecting to knx gateway: 224.0.23.12:3672 with phy. Adr: 1.0.2 minimum send delay: 50 ms debug level: silly openknx.0 2022-04-27 05:52:20.593 info starting. Version 0.1.22 in /opt/iobroker/node_modules/iobroker.openknx, node: v14.19.0, js-controller: 3.3.22 openknx.0 2022-04-27 05:52:19.175 debug Plugin sentry Initialize Plugin (enabled=trueHier das Senden eines Wertes:
openknx.0 2022-04-27 05:55:26.442 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_4:{"val":19.9,"ack":true,"ts":1651031726428,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031726428} openknx.0 2022-04-27 05:55:26.388 debug Inbound GroupValue_Write from 2.1.4 GA 1/5/3 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_4 val: 19.9 dpt: DPT9.001 openknx.0 2022-04-27 05:55:26.384 silly [trace] 2022-04-27 03:55:26.358 2022-04-27 03:55:26 **** (1/5/3) 19.9 °C DATAPOINT CHANGE (was: 19.8) openknx.0 2022-04-27 05:55:26.354 silly [trace] 2022-04-27 03:55:26.337 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.4","dest_addr":"1/5/3","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,198]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,198]}}}} openknx.0 2022-04-27 05:55:26.333 silly [debug] 2022-04-27 03:55:26.332 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021040d0303008007c6 openknx.0 2022-04-27 05:55:24.360 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_5:{"val":20.8,"ack":true,"ts":1651031724347,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031724347} openknx.0 2022-04-27 05:55:24.293 debug Inbound GroupValue_Write from 2.1.5 GA 1/5/4 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_5 val: 20.8 dpt: DPT9.001 openknx.0 2022-04-27 05:55:24.290 silly [trace] 2022-04-27 03:55:24.289 2022-04-27 03:55:24 **** (1/5/4) 20.8 °C DATAPOINT CHANGE (was: 20.9) openknx.0 2022-04-27 05:55:24.277 silly [trace] 2022-04-27 03:55:24.276 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.5","dest_addr":"1/5/4","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,12,16]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[12,16]}}}} openknx.0 2022-04-27 05:55:24.269 silly [debug] 2022-04-27 03:55:24.268 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021050d040300800c10 openknx.0 2022-04-27 05:55:23.862 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_8:{"val":19.1,"ack":true,"ts":1651031723837,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031723837} openknx.0 2022-04-27 05:55:23.767 debug Inbound GroupValue_Write from 2.1.8 GA 1/5/7 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_8 val: 19.1 dpt: DPT9.001 openknx.0 2022-04-27 05:55:23.755 silly [trace] 2022-04-27 03:55:23.722 2022-04-27 03:55:23 **** (1/5/7) 19.1 °C DATAPOINT CHANGE (was: 19.2) openknx.0 2022-04-27 05:55:23.718 silly [trace] 2022-04-27 03:55:23.716 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.8","dest_addr":"1/5/7","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,118]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,118]}}}} openknx.0 2022-04-27 05:55:23.710 silly [debug] 2022-04-27 03:55:23.709 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021080d070300800776 openknx.0 2022-04-27 05:55:14.416 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_7:{"val":18,"ack":true,"ts":1651031714399,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031714399} openknx.0 2022-04-27 05:55:14.365 debug Inbound GroupValue_Write from 2.1.7 GA 1/5/6 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_7 val: 18 dpt: DPT9.001 openknx.0 2022-04-27 05:55:14.362 silly [trace] 2022-04-27 03:55:14.362 2022-04-27 03:55:14 **** (1/5/6) 18 °C DATAPOINT CHANGE (was: 17.9) openknx.0 2022-04-27 05:55:14.359 silly [trace] 2022-04-27 03:55:14.358 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.7","dest_addr":"1/5/6","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,8]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,8]}}}} openknx.0 2022-04-27 05:55:14.354 silly [debug] 2022-04-27 03:55:14.353 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021070d060300800708 openknx.0 2022-04-27 05:55:13.903 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_1:{"val":20.3,"ack":true,"ts":1651031713893,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031713893} openknx.0 2022-04-27 05:55:13.870 debug Inbound GroupValue_Write from 2.1.1 GA 1/5/0 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_1 val: 20.3 dpt: DPT9.001 openknx.0 2022-04-27 05:55:13.847 silly [trace] 2022-04-27 03:55:13.846 2022-04-27 03:55:13 **** (1/5/0) 20.3 °C DATAPOINT CHANGE (was: 20.4) openknx.0 2022-04-27 05:55:13.843 silly [trace] 2022-04-27 03:55:13.842 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.1","dest_addr":"1/5/0","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,238]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,238]}}}} openknx.0 2022-04-27 05:55:13.834 silly [debug] 2022-04-27 03:55:13.833 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021010d0003008007ee openknx.0 2022-04-27 05:55:12.583 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_2:{"val":20.9,"ack":true,"ts":1651031712564,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031712564} openknx.0 2022-04-27 05:55:12.467 debug Inbound GroupValue_Write from 2.1.2 GA 1/5/1 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_2 val: 20.9 dpt: DPT9.001 openknx.0 2022-04-27 05:55:12.463 silly [trace] 2022-04-27 03:55:12.462 2022-04-27 03:55:12 **** (1/5/1) 20.9 °C DATAPOINT CHANGE (was: 21) openknx.0 2022-04-27 05:55:12.455 silly [trace] 2022-04-27 03:55:12.441 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.2","dest_addr":"1/5/1","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,12,21]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[12,21]}}}} openknx.0 2022-04-27 05:55:12.431 silly [debug] 2022-04-27 03:55:12.430 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021020d010300800c15 openknx.0 2022-04-27 05:55:11.365 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_3:{"val":20.2,"ack":true,"ts":1651031711336,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031711336} openknx.0 2022-04-27 05:55:11.266 debug Inbound GroupValue_Write from 2.1.3 GA 1/5/2 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_3 val: 20.2 dpt: DPT9.001 openknx.0 2022-04-27 05:55:11.253 silly [trace] 2022-04-27 03:55:11.246 2022-04-27 03:55:11 **** (1/5/2) 20.2 °C DATAPOINT CHANGE (was: 20.1) openknx.0 2022-04-27 05:55:11.123 silly [trace] 2022-04-27 03:55:11.122 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.3","dest_addr":"1/5/2","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,228]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,228]}}}} openknx.0 2022-04-27 05:55:11.114 silly [debug] 2022-04-27 03:55:11.113 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021030d0203008007e4 openknx.0 2022-04-27 05:55:06.444 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_4:{"val":19.8,"ack":true,"ts":1651031706418,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031706418} openknx.0 2022-04-27 05:55:06.394 debug Inbound GroupValue_Write from 2.1.4 GA 1/5/3 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_4 val: 19.8 dpt: DPT9.001 openknx.0 2022-04-27 05:55:06.379 silly [trace] 2022-04-27 03:55:06.377 2022-04-27 03:55:06 **** (1/5/3) 19.8 °C DATAPOINT CHANGE (was: 19.9) openknx.0 2022-04-27 05:55:06.368 silly [trace] 2022-04-27 03:55:06.355 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.4","dest_addr":"1/5/3","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,188]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,188]}}}} openknx.0 2022-04-27 05:55:06.343 silly [debug] 2022-04-27 03:55:06.342 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021040d0303008007bc openknx.0 2022-04-27 05:55:05.244 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_10:{"val":18.1,"ack":true,"ts":1651031705235,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031705235} openknx.0 2022-04-27 05:55:05.200 debug Inbound GroupValue_Write from 2.1.10 GA 1/5/9 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_10 val: 18.1 dpt: DPT9.001 openknx.0 2022-04-27 05:55:05.197 silly [trace] 2022-04-27 03:55:05.186 2022-04-27 03:55:05 **** (1/5/9) 18.1 °C DATAPOINT CHANGE (was: 18.2) openknx.0 2022-04-27 05:55:05.182 silly [trace] 2022-04-27 03:55:05.173 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.10","dest_addr":"1/5/9","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,18]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,18]}}}} openknx.0 2022-04-27 05:55:05.168 silly [debug] 2022-04-27 03:55:05.168 Inbound multicast message from 192.168.2.10: 0610053000132900bcd0210a0d090300800712 openknx.0 2022-04-27 05:55:04.371 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_5:{"val":20.9,"ack":true,"ts":1651031704355,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031704355} openknx.0 2022-04-27 05:55:04.303 debug Inbound GroupValue_Write from 2.1.5 GA 1/5/4 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_5 val: 20.9 dpt: DPT9.001 openknx.0 2022-04-27 05:55:04.284 silly [trace] 2022-04-27 03:55:04.284 2022-04-27 03:55:04 **** (1/5/4) 20.9 °C DATAPOINT CHANGE (was: 20.8) openknx.0 2022-04-27 05:55:04.280 silly [trace] 2022-04-27 03:55:04.271 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.5","dest_addr":"1/5/4","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,12,21]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[12,21]}}}} openknx.0 2022-04-27 05:55:04.263 silly [debug] 2022-04-27 03:55:04.262 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021050d040300800c15 openknx.0 2022-04-27 05:55:03.820 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_8:{"val":19.2,"ack":true,"ts":1651031703797,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031703797} openknx.0 2022-04-27 05:55:03.749 debug Inbound GroupValue_Write from 2.1.8 GA 1/5/7 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_8 val: 19.2 dpt: DPT9.001 openknx.0 2022-04-27 05:55:03.733 silly [trace] 2022-04-27 03:55:03.733 2022-04-27 03:55:03 **** (1/5/7) 19.2 °C DATAPOINT CHANGE (was: 19.1) openknx.0 2022-04-27 05:55:03.729 silly [trace] 2022-04-27 03:55:03.727 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.8","dest_addr":"1/5/7","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,128]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,128]}}}} openknx.0 2022-04-27 05:55:03.713 silly [debug] 2022-04-27 03:55:03.713 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021080d070300800780 openknx.0 2022-04-27 05:54:52.545 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_2:{"val":21,"ack":true,"ts":1651031692519,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031692519} openknx.0 2022-04-27 05:54:52.524 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_7:{"val":17.9,"ack":true,"ts":1651031692428,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031692428} openknx.0 2022-04-27 05:54:52.481 debug Inbound GroupValue_Write from 2.1.2 GA 1/5/1 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_2 val: 21 dpt: DPT9.001 openknx.0 2022-04-27 05:54:52.467 silly [trace] 2022-04-27 03:54:52.455 2022-04-27 03:54:52 **** (1/5/1) 21 °C DATAPOINT CHANGE (was: 20.9) openknx.0 2022-04-27 05:54:52.446 silly [trace] 2022-04-27 03:54:52.442 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.2","dest_addr":"1/5/1","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,12,26]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[12,26]}}}} openknx.0 2022-04-27 05:54:52.438 silly [debug] 2022-04-27 03:54:52.434 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021020d010300800c1a openknx.0 2022-04-27 05:54:52.380 debug Inbound GroupValue_Write from 2.1.7 GA 1/5/6 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_7 val: 17.9 dpt: DPT9.001 openknx.0 2022-04-27 05:54:52.377 silly [trace] 2022-04-27 03:54:52.376 2022-04-27 03:54:52 **** (1/5/6) 17.9 °C DATAPOINT CHANGE (was: 18) openknx.0 2022-04-27 05:54:52.372 silly [trace] 2022-04-27 03:54:52.371 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.7","dest_addr":"1/5/6","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,6,254]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[6,254]}}}} openknx.0 2022-04-27 05:54:52.366 silly [debug] 2022-04-27 03:54:52.365 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021070d0603008006fe openknx.0 2022-04-27 05:54:52.064 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_1:{"val":20.4,"ack":true,"ts":1651031692052,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031692052} openknx.0 2022-04-27 05:54:51.944 debug Inbound GroupValue_Write from 2.1.1 GA 1/5/0 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_1 val: 20.4 dpt: DPT9.001 openknx.0 2022-04-27 05:54:51.926 silly [trace] 2022-04-27 03:54:51.925 2022-04-27 03:54:51 **** (1/5/0) 20.4 °C DATAPOINT CHANGE (was: 20.3) openknx.0 2022-04-27 05:54:51.921 silly [trace] 2022-04-27 03:54:51.917 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.1","dest_addr":"1/5/0","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,248]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,248]}}}} openknx.0 2022-04-27 05:54:51.911 silly [debug] 2022-04-27 03:54:51.910 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021010d0003008007f8 openknx.0 2022-04-27 05:54:46.408 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_4:{"val":19.9,"ack":true,"ts":1651031686393,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031686393} openknx.0 2022-04-27 05:54:46.368 debug Inbound GroupValue_Write from 2.1.4 GA 1/5/3 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_4 val: 19.9 dpt: DPT9.001 openknx.0 2022-04-27 05:54:46.364 silly [trace] 2022-04-27 03:54:46.363 2022-04-27 03:54:46 **** (1/5/3) 19.9 °C DATAPOINT CHANGE (was: 19.8) openknx.0 2022-04-27 05:54:46.343 silly [trace] 2022-04-27 03:54:46.341 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.4","dest_addr":"1/5/3","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,198]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,198]}}}} openknx.0 2022-04-27 05:54:46.337 silly [debug] 2022-04-27 03:54:46.336 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021040d0303008007c6 openknx.0 2022-04-27 05:54:45.265 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_10:{"val":18.2,"ack":true,"ts":1651031685251,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031685251} openknx.0 2022-04-27 05:54:45.228 debug Inbound GroupValue_Write from 2.1.10 GA 1/5/9 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_10 val: 18.2 dpt: DPT9.001 openknx.0 2022-04-27 05:54:45.193 silly [trace] 2022-04-27 03:54:45.192 2022-04-27 03:54:45 **** (1/5/9) 18.2 °C DATAPOINT CHANGE (was: null) openknx.0 2022-04-27 05:54:45.181 silly [trace] 2022-04-27 03:54:45.180 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.10","dest_addr":"1/5/9","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,28]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,28]}}}} openknx.0 2022-04-27 05:54:45.168 silly [debug] 2022-04-27 03:54:45.167 Inbound multicast message from 192.168.2.10: 0610053000132900bcd0210a0d09030080071c openknx.0 2022-04-27 05:54:43.189 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_3:{"val":20.1,"ack":true,"ts":1651031683176,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031683176} openknx.0 2022-04-27 05:54:43.152 debug Inbound GroupValue_Write from 2.1.3 GA 1/5/2 to Object: openknx.0.Haussteuerung.Temperatur_Ist.Temp_3 val: 20.1 dpt: DPT9.001 openknx.0 2022-04-27 05:54:43.147 silly [trace] 2022-04-27 03:54:43.141 2022-04-27 03:54:43 **** (1/5/2) 20.1 °C DATAPOINT CHANGE (was: 20.2) openknx.0 2022-04-27 05:54:43.128 silly [trace] 2022-04-27 03:54:43.127 (idle): Received ROUTING_INDICATION_L_Data.ind message: {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":19,"cemi":{"msgcode":41,"addinfo_length":0,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":5,"extendedFrame":0},"src_addr":"2.1.3","dest_addr":"1/5/2","apdu":{"apdu_length":3,"apdu_raw":{"type":"Buffer","data":[0,128,7,218]},"tpci":0,"apci":"GroupValue_Write","data":{"type":"Buffer","data":[7,218]}}}} openknx.0 2022-04-27 05:54:43.120 silly [debug] 2022-04-27 03:54:43.119 Inbound multicast message from 192.168.2.10: 0610053000132900bcd021030d0203008007da openknx.0 2022-04-27 05:54:36.626 silly [debug] 2022-04-27 03:54:36.625 (idle): zzzz... openknx.0 2022-04-27 05:54:36.623 silly [debug] 2022-04-27 03:54:36.623 (sendDatagram): >>>>>>> successfully sent seqnum: 228 openknx.0 2022-04-27 05:54:36.620 silly [trace] 2022-04-27 03:54:36.620 (sendDatagram): UDP sent OK: ROUTING_INDICATION_L_Data.ind 0610053000122900bce010020b1602008080 openknx.0 2022-04-27 05:54:36.616 silly [trace] 2022-04-27 03:54:36.615 (sendDatagram): Sending ROUTING_INDICATION_L_Data.ind ==> {"header_length":6,"protocol_version":16,"service_type":1328,"total_length":18,"hpai":{"protocol_type":1,"tunnel_endpoint":"0.0.0.0:0"},"cemi":{"msgcode":41,"ctrl":{"frameType":1,"reserved":0,"repeat":1,"broadcast":1,"priority":3,"acknowledge":0,"confirm":0,"destAddrType":1,"hopCount":6,"extendedFrame":0},"src_addr":"1.0.2","dest_addr":"1/3/22","apdu":{"apci":"GroupValue_Write","tpci":0,"data":{"type":"Buffer","data":[128]},"bitlength":8}}} openknx.0 2022-04-27 05:54:36.588 debug Outbound GroupValue_Write to 1/3/22 val: 50 from openknx.0.Haussteuerung.Dimmer.Dimmer_Büro_Keller_Schreibtisch_links openknx.0 2022-04-27 05:54:36.566 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Dimmer.Dimmer_Büro_Keller_Schreibtisch_links:{"val":50,"ack":false,"ts":1651031676559,"q":0,"from":"system.adapter.admin.0","user":"system.user.admin","lc":1651031676559} openknx.0 2022-04-27 05:54:32.442 silly States user redis pmessage io.openknx.0.*/io.openknx.0.Haussteuerung.Temperatur_Ist.Temp_7:{"val":18,"ack":true,"ts":1651031672432,"q":0,"from":"system.adapter.openknx.0","user":"system.user.admin","lc":1651031672432} -
@tro Ich glaube ich kann es nachvollziehen, ich melde mich wieder wenn das Problem demnächst behoben ist.
-
@petkoh Ich sehe du verwendest einen Router. Ich kann das momentan leider nicht testen, weil ich kein solches Gerät zur Verfügung habe.
@killroy2
Hallo Killroy2! Es gibt Probleme mit der API-Kommunikation über Internet mit Bosch.
Hier sind die Beiträge der Nutzer im anderen Forum: https://forum.iobroker.net/topic/9915/adapter-für-bosch-indego-connect/185 (ist das das falsche Forum??)
Gruß
HansEDIT: @killroy2 Tut mir sehr leid Dich belästigt zu haben! Liegt am Bosch-Adapter!! Neue Version verfügbar!
-
@petkoh Ich sehe du verwendest einen Router. Ich kann das momentan leider nicht testen, weil ich kein solches Gerät zur Verfügung habe.
@killroy2 Habe gerade Open KNX 0.2.3 installiert und läuft!
Danke! -
Aktuelle Testversion v0.7.3-alpha.1 Stabile Version: 0.6.3 Erstveröffentlichungsdatum 16.12.2021 Github Link https://github.com/iobroker-community-adapters/ioBroker.openknx/ NPM Link https://www.npmjs.com/package/iobroker.openknx Issues Board in GitHub https://github.com/iobroker-community-adapters/ioBroker.openknx/issues Installation der Testversion
"Adapter", "Expertenmodus", "Octocat", "Benutzerdefiniert" und diesen Link:
https://github.com/iobroker-community-adapters/ioBroker.openknx.gitAdapter Beschreibung, Changelog etc.
Hier ist die erste öffentliche Testversion des Open KNX Adapters. Der Adapter kommuniziert über ein IP Interface mit dem KNX Bus. Verschiedene KNX Telegrammtypen (GroupValue_Read, GroupValue_Write, GroupValue_Response) in Sende- und Empfangsrichtung werden in, dem IOB Anwender vertrauten Interaktionen mit IoBroker Objekten übersetzt.Motivation
Ich habe den Adapter aus einer Not heraus erstellt, da der verfügbare Adapter nicht fehlerfrei lief und nicht kompatibel zu meinen IP Interfaces ist. Debuggen war aufgrund Closed Source nicht möglich. Da Adapter läuft so gut, dass ich ihn der Öffentlichkeit übergeben möchte.
Der Adapter ist Quelloffen, Code kann gerne von Jedermann inspiziert und Pull Requests eingestellt werden.
Eine Beschreibung des Adapters und dessen Verwendung ist auf den verlinkten Seiten zu finden.Ziel
Der Adapter soll:- Stabil laufen und sich Standardkonform verhalten
- möglich einfach und verständlich sein
Thema umgesetzt ab Version Erwartung Release 0.1.x Release im stable repository Installation 0.1.6 Adapter lässt sich fehlerfrei über NPM installieren Installation 0.1.9 Adapter lässt sich über IOB Bordmittel installieren Betrieb 0.1.6 Adapter zeigt den Betriebszustand (rot,gelb,grün) korrekt an, bei Verbindungsabbrucht wird der Adapter gelb, keine Warnungen im Log die nicht zum Zustand passen Betrieb 0.1.8 keine Warnungen im Log die nicht zum Zustand passen Übersetzung 0.1.8 Admin Dialoge in alle Sprachen übersetzt, Logs nicht Alias 0.1.11 Generierung von Alias zur Zusammenbringen von Status und Ausgabe-GA zu einem Objekt eingebaut, noch nicht fehlerfrei Ich erhoffe mir Feedback zB zu
- Bugs, Error Logs;
- Verständlichkeit und Vollständigkeit der Doku
- Verwendbarkeit des Adapters, sind die Features brauchbar, was fehlt essentielles
- Code Reviews
- Erfahrungen aus dem Betrieb
- Ideen zur Geschäftslogik, zB werden aktuell Szenen DPTs von der Autoread Abfrage bei Start ausgeschlossen; gibt es bessere Filter?
- Verbesserungsvorschläge am Interface, z.B. welche State roles eignen sich für welche DPTs, sind die Datentypen passend gewählt, ...
Feature Anfragen, Fehlermeldungen dürfen gerne in GitHub erstellt werden. Umsetzung erfolgt immer nach Beschlusslage.
Version 0.2.3 ist released und wartet mit ein paar wesentlichen Änderungen:
-Wert setzen auf ein iob objekt wird mit ack quittiert sofern jemand auf dem KNX Bus empfang bestätigt
unbestätigtes Schreiben erzeugt einen Logeintrag
und frühere Dialog um das Verhalten zu simulieren sind jetzt entfernt
-Dialog für physical KNX Adresse vom Gateway entfernt, das GW kennt seine Adresse selbst -
Version 0.2.3 ist released und wartet mit ein paar wesentlichen Änderungen:
-Wert setzen auf ein iob objekt wird mit ack quittiert sofern jemand auf dem KNX Bus empfang bestätigt
unbestätigtes Schreiben erzeugt einen Logeintrag
und frühere Dialog um das Verhalten zu simulieren sind jetzt entfernt
-Dialog für physical KNX Adresse vom Gateway entfernt, das GW kennt seine Adresse selbst@killroy2 Habe versucht von 0.2.3 auf 0.2.4 ein Update zu machen. Update laüft ohne Fehlermeldung durch, Versionsnummer wird aber in "Adapter" nicht aktualisiert.
In "Instanzen" steht in der obersten Zeile "Instanzeinstellungen: openknx.0 v0.2.3" obwohl ich ohne Fehlermeldung ("Process exited with code 0") die 0.2.4 installiert habe. -
@killroy2 versuche gerade von Version 0.2.3 auf 0.2.4 zu updaten leider kann ich noch nicht einmal auf den Updatebutton klicken, der ist ausgegraut.
Die Meldung der Abhängigkeit verstehe ich auch nicht, da js-controller in der Version 4.0.23 installiert ist.
Hast du eventuell eine Idee wie ich das Update durchführen kann? -
@killroy2 versuche gerade von Version 0.2.3 auf 0.2.4 zu updaten leider kann ich noch nicht einmal auf den Updatebutton klicken, der ist ausgegraut.
Die Meldung der Abhängigkeit verstehe ich auch nicht, da js-controller in der Version 4.0.23 installiert ist.
Hast du eventuell eine Idee wie ich das Update durchführen kann?Du bist ein Beta-Tester des Admin 6.0.0?
-
Du bist ein Beta-Tester des Admin 6.0.0?
-
Dann hast du deine Antwort schon.
-
Dann hast du deine Antwort schon.
@thomas-braun ok dann gehe ich wieder auf 5.4.9 zurück.
-
@thomas-braun ok dann gehe ich wieder auf 5.4.9 zurück.
Aber warum knallt man sich Beta-Versionen in sein System, liest dann aber die entsprechenden Threads dazu nicht mit?
Das ist kein Beta-Testing, das ist Blödsinn. -
Dann hast du deine Antwort schon.
@thomas-braun mit Admin 5.4.9 kann ich zwar das update anstoßen, aber eine Aktualisierung scheint nicht wirklich durchgeführt zu werden.
Der Update-Log gibt keine Fehler aus, aber der Adapter wird noch immer mit Version 0.2.3 angezeigt, auch nach einem Restart. -
@thomas-braun mit Admin 5.4.9 kann ich zwar das update anstoßen, aber eine Aktualisierung scheint nicht wirklich durchgeführt zu werden.
Der Update-Log gibt keine Fehler aus, aber der Adapter wird noch immer mit Version 0.2.3 angezeigt, auch nach einem Restart.iobroker upload all -
iobroker upload all@thomas-braun bringt leider keine Besserung.
hier mal noch der update-log eventuell habe ich was übersehen:$ iobroker upgrade openknx@0.2.4 Update openknx from @0.2.3 to @0.2.4 NPM version: 8.5.5 Installing iobroker.openknx@0.2.4... (System call) up to date in 5s55 packages are looking for funding run `npm fund` for details upload [14] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/exportGA.png exportGA.png image/png upload [13] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [12] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [11] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [10] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [9] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [8] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [7] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [6] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [5] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [4] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [3] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/index_m.html index_m.html text/html upload [2] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/openknx.png openknx.png image/png upload [1] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/style.css style.css text/css upload [0] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/words.js words.js application/javascript Process exited with code 0 -
@thomas-braun bringt leider keine Besserung.
hier mal noch der update-log eventuell habe ich was übersehen:$ iobroker upgrade openknx@0.2.4 Update openknx from @0.2.3 to @0.2.4 NPM version: 8.5.5 Installing iobroker.openknx@0.2.4... (System call) up to date in 5s55 packages are looking for funding run `npm fund` for details upload [14] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/exportGA.png exportGA.png image/png upload [13] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/de/translations.json i18n/de/translations.json application/json upload [12] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/en/translations.json i18n/en/translations.json application/json upload [11] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/es/translations.json i18n/es/translations.json application/json upload [10] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/fr/translations.json i18n/fr/translations.json application/json upload [9] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/it/translations.json i18n/it/translations.json application/json upload [8] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/nl/translations.json i18n/nl/translations.json application/json upload [7] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/pl/translations.json i18n/pl/translations.json application/json upload [6] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/pt/translations.json i18n/pt/translations.json application/json upload [5] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/ru/translations.json i18n/ru/translations.json application/json upload [4] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/i18n/zh-cn/translations.json i18n/zh-cn/translations.json application/json upload [3] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/index_m.html index_m.html text/html upload [2] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/openknx.png openknx.png image/png upload [1] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/style.css style.css text/css upload [0] openknx.admin /opt/iobroker/node_modules/iobroker.openknx/admin/words.js words.js application/javascript Process exited with code 0iobroker update -i sudo ln -s /usr/bin/node /usr/bin/nodejs uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs cd /opt/iobroker npm ls -
iobroker update -i sudo ln -s /usr/bin/node /usr/bin/nodejs uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs cd /opt/iobroker npm ls@thomas-braun hier mal die ganzen Ausgaben der Befehle:
pi@raspberrypi:/home/iobroker $ iobroker update -i ^[[DUsed repository: Beta (latest) Adapter "admin" : 6.0.0 , installed 5.4.9 [Updatable] Adapter "backitup" : 2.4.9 , installed 2.4.9 Adapter "discovery" : 3.0.3 , installed 3.0.3 Adapter "history" : 2.1.2 , installed 2.1.2 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "influxdb" : 3.1.3 , installed 3.1.3 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 5.7.0 , installed 5.7.0 Controller "js-controller": 4.0.23 , installed 4.0.23 Adapter "modbus" : 5.0.3 , installed 5.0.3 Adapter "myvbus" : 0.2.2 , installed 0.2.2 Adapter "openknx" : 0.2.4 , installed 0.2.3 [Updatable] Adapter "simple-api" : 2.7.0 , installed 2.7.0 Adapter "smartgarden" : 1.0.6 , installed 1.0.6 Adapter "socketio" : 6.1.4 , installed 6.1.4 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-hqwidgets": 1.2.0 , installed 1.2.0 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.1.7, installed 1.1.7 Adapter "web" : 5.2.0 , installed 4.3.0 [Updatable] Adapter "ws" : 2.1.0 , installed 2.1.0pi@raspberrypi:/home/iobroker $ sudo ln -s /usr/bin/node /usr/bin/nodejs pi@raspberrypi:/home/iobroker $ uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs armv7l /usr/bin/nodejs /usr/bin/node /usr/bin/npm v17.9.0 v17.9.0 8.5.5 pi /home/iobroker OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://archive.raspberrypi.org/debian buster InRelease OK:3 https://deb.nodesource.com/node_17.x buster InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Alle Pakete sind aktuell. nodejs: Installiert: 17.9.0-deb-1nodesource1 Installationskandidat: 17.9.0-deb-1nodesource1 Versionstabelle: *** 17.9.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_17.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packagespi@raspberrypi:/home/iobroker $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm ls iobroker.inst@3.0.0 /opt/iobroker ├── @types/caseless@0.12.2 extraneous ├── @types/request@2.48.8 extraneous ├── @types/tough-cookie@4.0.1 extraneous ├── acorn-walk@8.2.0 extraneous ├── acorn@8.7.0 extraneous ├── coffee-compiler@0.3.2 extraneous ├── coffee-script@1.12.7 extraneous ├── iobroker.admin@5.4.9 ├── iobroker.backitup@2.4.9 ├── iobroker.discovery@3.0.3 ├── iobroker.history@2.1.2 ├── iobroker.icons-material-png@0.1.0 ├── iobroker.icons-mfd-svg@1.1.0 ├── iobroker.influxdb@3.1.3 ├── iobroker.info@1.9.19 ├── iobroker.javascript@5.7.0 ├── iobroker.js-controller@4.0.23 ├── iobroker.modbus@5.0.3 ├── iobroker.myvbus@0.2.2 ├── iobroker.openknx@0.2.4 ├── iobroker.simple-api@2.7.0 ├── iobroker.smartgarden@1.0.6 ├── iobroker.socketio@6.1.4 ├── iobroker.vis-hqwidgets@1.2.0 ├── iobroker.vis-materialdesign@0.5.9 ├── iobroker.vis-metro@1.2.0 ├── iobroker.vis-timeandweather@1.1.7 ├── iobroker.vis@1.4.15 ├── iobroker.web@4.3.0 ├── iobroker.ws@2.1.0 ├── jsonata@1.8.6 extraneous ├── node-inspect@2.0.0 extraneous ├── picocolors@1.0.0 extraneous ├── suncalc2@1.8.1 extraneous ├── typescript@4.6.4 extraneous ├── uuid@8.3.2 ├── virtual-tsc@0.6.2 extraneous ├── vm2@3.9.9 extraneous └── wake_on_lan@1.0.0 extraneous -
@thomas-braun hier mal die ganzen Ausgaben der Befehle:
pi@raspberrypi:/home/iobroker $ iobroker update -i ^[[DUsed repository: Beta (latest) Adapter "admin" : 6.0.0 , installed 5.4.9 [Updatable] Adapter "backitup" : 2.4.9 , installed 2.4.9 Adapter "discovery" : 3.0.3 , installed 3.0.3 Adapter "history" : 2.1.2 , installed 2.1.2 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "influxdb" : 3.1.3 , installed 3.1.3 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 5.7.0 , installed 5.7.0 Controller "js-controller": 4.0.23 , installed 4.0.23 Adapter "modbus" : 5.0.3 , installed 5.0.3 Adapter "myvbus" : 0.2.2 , installed 0.2.2 Adapter "openknx" : 0.2.4 , installed 0.2.3 [Updatable] Adapter "simple-api" : 2.7.0 , installed 2.7.0 Adapter "smartgarden" : 1.0.6 , installed 1.0.6 Adapter "socketio" : 6.1.4 , installed 6.1.4 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-hqwidgets": 1.2.0 , installed 1.2.0 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-timeandweather": 1.1.7, installed 1.1.7 Adapter "web" : 5.2.0 , installed 4.3.0 [Updatable] Adapter "ws" : 2.1.0 , installed 2.1.0pi@raspberrypi:/home/iobroker $ sudo ln -s /usr/bin/node /usr/bin/nodejs pi@raspberrypi:/home/iobroker $ uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs armv7l /usr/bin/nodejs /usr/bin/node /usr/bin/npm v17.9.0 v17.9.0 8.5.5 pi /home/iobroker OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease OK:2 http://archive.raspberrypi.org/debian buster InRelease OK:3 https://deb.nodesource.com/node_17.x buster InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Alle Pakete sind aktuell. nodejs: Installiert: 17.9.0-deb-1nodesource1 Installationskandidat: 17.9.0-deb-1nodesource1 Versionstabelle: *** 17.9.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_17.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packagespi@raspberrypi:/home/iobroker $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ npm ls iobroker.inst@3.0.0 /opt/iobroker ├── @types/caseless@0.12.2 extraneous ├── @types/request@2.48.8 extraneous ├── @types/tough-cookie@4.0.1 extraneous ├── acorn-walk@8.2.0 extraneous ├── acorn@8.7.0 extraneous ├── coffee-compiler@0.3.2 extraneous ├── coffee-script@1.12.7 extraneous ├── iobroker.admin@5.4.9 ├── iobroker.backitup@2.4.9 ├── iobroker.discovery@3.0.3 ├── iobroker.history@2.1.2 ├── iobroker.icons-material-png@0.1.0 ├── iobroker.icons-mfd-svg@1.1.0 ├── iobroker.influxdb@3.1.3 ├── iobroker.info@1.9.19 ├── iobroker.javascript@5.7.0 ├── iobroker.js-controller@4.0.23 ├── iobroker.modbus@5.0.3 ├── iobroker.myvbus@0.2.2 ├── iobroker.openknx@0.2.4 ├── iobroker.simple-api@2.7.0 ├── iobroker.smartgarden@1.0.6 ├── iobroker.socketio@6.1.4 ├── iobroker.vis-hqwidgets@1.2.0 ├── iobroker.vis-materialdesign@0.5.9 ├── iobroker.vis-metro@1.2.0 ├── iobroker.vis-timeandweather@1.1.7 ├── iobroker.vis@1.4.15 ├── iobroker.web@4.3.0 ├── iobroker.ws@2.1.0 ├── jsonata@1.8.6 extraneous ├── node-inspect@2.0.0 extraneous ├── picocolors@1.0.0 extraneous ├── suncalc2@1.8.1 extraneous ├── typescript@4.6.4 extraneous ├── uuid@8.3.2 ├── virtual-tsc@0.6.2 extraneous ├── vm2@3.9.9 extraneous └── wake_on_lan@1.0.0 extraneousWarum node17?
Zurück auf 14. Oder 16, das bringt npm8 schon mit. -
Warum node17?
Zurück auf 14. Oder 16, das bringt npm8 schon mit.@thomas-braun hatte bisher ohne Probleme funktioniert gehabt.
-
@thomas-braun hatte bisher ohne Probleme funktioniert gehabt.
Ist nicht die empfohlene Version für dein ioBroker und darüberhinaus als ungerade Version die Developer-Geschichte. Und das EOL hat die Version auch überschritten.
Support us
813
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge