NEWS
Grafana Update Probleme
-
@nashra mit welchen Befehlen hast Du denn auf Version 8 geuodatet.
Ich habe das nämlich auch gemacht und es lief durch. Allerdings wird mir bei Grafana weiterhin Version 7.4 angezeigt. Es sieht so aus als hätte ich jetzt zwei Versionen von Grafana auf meinem Raspi@damrak2022 sagte in [Linux Shell-Skript] WLAN-Wetterstation:
Allerdings wird mir bei Grafana weiterhin Version 7.4 angezeigt.
apt policy grafana*Entweder hast du da eine Variante installiert oder eine 'wilde Installation' am Paketmanager vorbei gemacht.
-
@damrak2022 Die "einfachste" ist direkt über den Paketmanager, sofern du Grafana vertraust.
Dazu trägst du die Sourcen einmalig ein:
sudo nano /etc/apt/sources.list
Hier muss es dann (ggf. hinzufügen) eine Zeile gebendeb https://packages.grafana.com/oss/deb stable main"stable" in der Zeile bedeutet, wie der Name schon sagt, es werden nur stabile Version angezeigt/installiert, keine Beta-Versionen.
Dann wird dir zukünftig bei einemsudo apt updateauch eine neue Grafana-Version angeboten, sofern vorhanden, bzw. dann beisudo apt upgradeinstalliert.@sborg sagte in [Linux Shell-Skript] WLAN-Wetterstation:
sudo apt upgrade
Ich habe das nun genauso gemacht wie von Dir beschrieben, komme aber nicht auf Grafana 8, da irgendwas bei mir nicht korrekt ist:
So sieht es nach Eingabe vonsudo nano /etc/apt/sources.listaus
deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi # Uncomment line below then 'apt-get update' to enable 'apt-get source' deb-src http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-fre> deb https://archive.raspbian.org/raspbian buster main contrib non-free deb-src https://archive.raspbian.org/raspbian buster main contrib non-free deb https://packages.grafana.com/oss/deb stable mainDas kommt nach
pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo apt update Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/oss/deb stable InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://archive.raspbian.org/raspbian buster InRelease Hit:7 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 pi@homebridge:~ $ sudo /etc/apt/sources.list.d/grafana sudo: /etc/apt/sources.list.d/grafana: command not found pi@homebridge:~ $ sudo nano /etc/apt/sources.list.d/grafana pi@homebridge:~ $ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.Mit besten Grüßen
Andy -
@sborg sagte in [Linux Shell-Skript] WLAN-Wetterstation:
sudo apt upgrade
Ich habe das nun genauso gemacht wie von Dir beschrieben, komme aber nicht auf Grafana 8, da irgendwas bei mir nicht korrekt ist:
So sieht es nach Eingabe vonsudo nano /etc/apt/sources.listaus
deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi # Uncomment line below then 'apt-get update' to enable 'apt-get source' deb-src http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-fre> deb https://archive.raspbian.org/raspbian buster main contrib non-free deb-src https://archive.raspbian.org/raspbian buster main contrib non-free deb https://packages.grafana.com/oss/deb stable mainDas kommt nach
pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo apt update Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/oss/deb stable InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://archive.raspbian.org/raspbian buster InRelease Hit:7 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:6 and /etc/apt/sources.list.d/grafana.list:1 pi@homebridge:~ $ sudo /etc/apt/sources.list.d/grafana sudo: /etc/apt/sources.list.d/grafana: command not found pi@homebridge:~ $ sudo nano /etc/apt/sources.list.d/grafana pi@homebridge:~ $ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.Nimm die Zeile aus
/etc/apt/sources.list
wieder raus. Die ist schon in
/etc/apt/sources.list.d/grafana.list
drin und somit doppelt vorhanden.Dann hast du noch eine Referenz zu Buster in den Quellen, das muss alles einheitlich auf bullseye verweisen.
sudo apt update apt policy grafana*liefert danach?
-
Nimm die Zeile aus
/etc/apt/sources.list
wieder raus. Die ist schon in
/etc/apt/sources.list.d/grafana.list
drin und somit doppelt vorhanden.Dann hast du noch eine Referenz zu Buster in den Quellen, das muss alles einheitlich auf bullseye verweisen.
sudo apt update apt policy grafana*liefert danach?
@thomas-braun sagte in [Linux Shell-Skript] WLAN-Wetterstation:
apt policy grafana*
Das habe ich gemacht, bekomme nun aber dies:
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Mon Apr 25 04:05:59 2022 from 2a02:908:171:e900:5da1:8f55:5199:833 pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo apt update Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/oss/deb stable InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://archive.raspbian.org/raspbian buster InRelease Hit:7 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. pi@homebridge:~ $ apt policy grafana* N: Unable to locate package grafana-rpi_7.4.3_armhf.deb pi@homebridge:~ $Mit besten Grüßen
Andy -
@thomas-braun sagte in [Linux Shell-Skript] WLAN-Wetterstation:
apt policy grafana*
Das habe ich gemacht, bekomme nun aber dies:
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Mon Apr 25 04:05:59 2022 from 2a02:908:171:e900:5da1:8f55:5199:833 pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo apt update Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/oss/deb stable InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://archive.raspbian.org/raspbian buster InRelease Hit:7 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. pi@homebridge:~ $ apt policy grafana* N: Unable to locate package grafana-rpi_7.4.3_armhf.deb pi@homebridge:~ $Steht immer noch irgendwo buster drin. Das muss raus.
sudo sed -i 's/bullseye\/updates/bullseye-security/g' /etc/apt/sources.list sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list.d/*Ist vielleicht auch was für einen eigenen Thread, das hat mit dem Skript hier nix zu tun.
-
Steht immer noch irgendwo buster drin. Das muss raus.
sudo sed -i 's/bullseye\/updates/bullseye-security/g' /etc/apt/sources.list sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list.d/*Ist vielleicht auch was für einen eigenen Thread, das hat mit dem Skript hier nix zu tun.
@thomas-braun Habe jetzt die beiden Buster Einträge rausgenommen:
pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo apt update Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/oss/deb stable InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://archive.raspbian.org/raspbian buster InRelease Hit:7 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. pi@homebridge:~ $ apt policy grafana* N: Unable to locate package grafana-rpi_7.4.3_armhf.deb pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo sed -i 's/bullseye\/updates/bullseye-security/g' /etc/apt/sources.list pi@homebridge:~ $ sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list pi@homebridge:~ $ sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list.d/* pi@homebridge:~ $ sudo apt update Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/oss/deb stable InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. pi@homebridge:~ $ apt policy grafana* N: Unable to locate package grafana-rpi_7.4.3_armhf.deb pi@homebridge:~ $Mit besten Grüßen
Andy -
@thomas-braun Habe jetzt die beiden Buster Einträge rausgenommen:
pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo apt update Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/oss/deb stable InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://archive.raspbian.org/raspbian buster InRelease Hit:7 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. pi@homebridge:~ $ apt policy grafana* N: Unable to locate package grafana-rpi_7.4.3_armhf.deb pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo sed -i 's/bullseye\/updates/bullseye-security/g' /etc/apt/sources.list pi@homebridge:~ $ sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list pi@homebridge:~ $ sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list.d/* pi@homebridge:~ $ sudo apt update Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://packages.grafana.com/oss/deb stable InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. pi@homebridge:~ $ apt policy grafana* N: Unable to locate package grafana-rpi_7.4.3_armhf.deb pi@homebridge:~ $ -
@thomas-braun sagte in [Linux Shell-Skript] WLAN-Wetterstation:
cat /proc/cpuinfo
pi@homebridge:~ $ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 Hardware : BCM2711 Revision : c03112 Serial : 10000000d6b8c228 Model : Raspberry Pi 4 Model B Rev 1.2 pi@homebridge:~ $Mit besten Grüßen
Andy -
@thomas-braun sagte in [Linux Shell-Skript] WLAN-Wetterstation:
cat /proc/cpuinfo
pi@homebridge:~ $ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 1 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 2 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 processor : 3 model name : ARMv7 Processor rev 3 (v7l) BogoMIPS : 270.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd08 CPU revision : 3 Hardware : BCM2711 Revision : c03112 Serial : 10000000d6b8c228 Model : Raspberry Pi 4 Model B Rev 1.2 pi@homebridge:~ $Dann ist
grafana-rpi_7.4.3_armhf.deb
eh falsch. Die Version ist für ältere Pi vorgesehen. Und wie kommt die überhaupt auf dein System? Denn in den Quellen ist 7.4.0 die aktuelle Version:
echad@chet:~ $ apt policy grafana-rpi grafana-rpi:armhf: Installed: (none) Candidate: 7.4.0 Version table: 7.4.0 500 500 https://packages.grafana.com/oss/deb stable/main armhf Packages 7.3.3 500 500 https://packages.grafana.com/oss/deb stable/main armhf Packages -
Dann ist
grafana-rpi_7.4.3_armhf.deb
eh falsch. Die Version ist für ältere Pi vorgesehen. Und wie kommt die überhaupt auf dein System? Denn in den Quellen ist 7.4.0 die aktuelle Version:
echad@chet:~ $ apt policy grafana-rpi grafana-rpi:armhf: Installed: (none) Candidate: 7.4.0 Version table: 7.4.0 500 500 https://packages.grafana.com/oss/deb stable/main armhf Packages 7.3.3 500 500 https://packages.grafana.com/oss/deb stable/main armhf Packages@thomas-braun Die aktuelle version ist doch 8.xx, oder
Also wie ändere ich das nun. Das müsste sich doch updaten, da es nun in der list drinsteht, oder nicht?Mit besten Grüßen
Andy -
Dann ist
grafana-rpi_7.4.3_armhf.deb
eh falsch. Die Version ist für ältere Pi vorgesehen. Und wie kommt die überhaupt auf dein System? Denn in den Quellen ist 7.4.0 die aktuelle Version:
echad@chet:~ $ apt policy grafana-rpi grafana-rpi:armhf: Installed: (none) Candidate: 7.4.0 Version table: 7.4.0 500 500 https://packages.grafana.com/oss/deb stable/main armhf Packages 7.3.3 500 500 https://packages.grafana.com/oss/deb stable/main armhf PackagesDieser Beitrag wurde gelöscht! -
@thomas-braun Die aktuelle version ist doch 8.xx, oder
Also wie ändere ich das nun. Das müsste sich doch updaten, da es nun in der list drinsteht, oder nicht?@damrak2022 sagte in [Linux Shell-Skript] WLAN-Wetterstation:
Die aktuelle version ist doch 8.xx, oder
Für das Paket 'grafana' schon:
echad@chet:~ $ apt policy grafana grafana: Installed: (none) Candidate: 8.5.0 Version table: 8.5.0 500 500 https://packages.grafana.com/oss/deb stable/main arm64 Packages 100 /var/lib/dpkg/status 8.4.7 500 500 https://packages.grafana.com/oss/deb stable/main arm64 PackagesDein irgendwie installiertes Paket 'grafana-rpi' ist bei Version 7.4.0.
Ich würde das versuchen rauszukicken.
Was passiert bei
sudo apt install grafana -
Dieser Beitrag wurde gelöscht!
-
@damrak2022 sagte in [Linux Shell-Skript] WLAN-Wetterstation:
Die aktuelle version ist doch 8.xx, oder
Für das Paket 'grafana' schon:
echad@chet:~ $ apt policy grafana grafana: Installed: (none) Candidate: 8.5.0 Version table: 8.5.0 500 500 https://packages.grafana.com/oss/deb stable/main arm64 Packages 100 /var/lib/dpkg/status 8.4.7 500 500 https://packages.grafana.com/oss/deb stable/main arm64 PackagesDein irgendwie installiertes Paket 'grafana-rpi' ist bei Version 7.4.0.
Ich würde das versuchen rauszukicken.
Was passiert bei
sudo apt install grafana@thomas-braun sagte in [Linux Shell-Skript] WLAN-Wetterstation:
sudo
pi@homebridge:~ $ sudo apt install grafana Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: grafana 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/74.0 MB of archives. After this operation, 243 MB of additional disk space will be used. Selecting previously unselected package grafana. (Reading database ... 67659 files and directories currently installed.) Preparing to unpack .../grafana_8.5.0_armhf.deb ... Unpacking grafana (8.5.0) ... Replaced by files in installed package grafana-rpi (7.4.3) ... Setting up grafana (8.5.0) ... ### NOT starting on installation, please execute the following statements to configure grafana to start automatically using systemd sudo /bin/systemctl daemon-reload sudo /bin/systemctl enable grafana-server ### You can start grafana-server by executing sudo /bin/systemctl start grafana-serverMit besten Grüßen
Andy -
@thomas-braun sagte in [Linux Shell-Skript] WLAN-Wetterstation:
sudo
pi@homebridge:~ $ sudo apt install grafana Reading package lists... Done Building dependency tree... Done Reading state information... Done The following NEW packages will be installed: grafana 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/74.0 MB of archives. After this operation, 243 MB of additional disk space will be used. Selecting previously unselected package grafana. (Reading database ... 67659 files and directories currently installed.) Preparing to unpack .../grafana_8.5.0_armhf.deb ... Unpacking grafana (8.5.0) ... Replaced by files in installed package grafana-rpi (7.4.3) ... Setting up grafana (8.5.0) ... ### NOT starting on installation, please execute the following statements to configure grafana to start automatically using systemd sudo /bin/systemctl daemon-reload sudo /bin/systemctl enable grafana-server ### You can start grafana-server by executing sudo /bin/systemctl start grafana-server@damrak2022 sagte in [Linux Shell-Skript] WLAN-Wetterstation:
sudo /bin/systemctl daemon-reload sudo /bin/systemctl enable grafana-server sudo /bin/systemctl start grafana-serverDann schau mal ob das auch nach einem reboot wieder auf die Füße kommt.
-
@thomas-braun sagte in [Linux Shell-Skript] WLAN-Wetterstation:
Mach einen eigenen Thread dafür auf.
@Damrak2022
hier bitte weitermachen! -
@damrak2022 sagte in [Linux Shell-Skript] WLAN-Wetterstation:
sudo /bin/systemctl daemon-reload sudo /bin/systemctl enable grafana-server sudo /bin/systemctl start grafana-serverDann schau mal ob das auch nach einem reboot wieder auf die Füße kommt.
@thomas-braun Der Reboot war gar kein Problem
In der
sudo nano /etc/apt/sources.list.d/grafana.listsieht es so aus:
deb https://packages.grafana.com/oss/deb stable mainund in der
sudo nano /etc/apt/sources.listso
deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi # Uncomment line below then 'apt-get update' to enable 'apt-get source' deb-src http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-fre>Danach habe ich nochmal ein
sudo apt update sudo apt upgradegemacht - Browsercache und anderen Browser genutzt, aber bei Grafana steht immer noch Version 7.4.3 drin
Mit besten Grüßen
Andy -
@thomas-braun Der Reboot war gar kein Problem
In der
sudo nano /etc/apt/sources.list.d/grafana.listsieht es so aus:
deb https://packages.grafana.com/oss/deb stable mainund in der
sudo nano /etc/apt/sources.listso
deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi # Uncomment line below then 'apt-get update' to enable 'apt-get source' deb-src http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-fre>Danach habe ich nochmal ein
sudo apt update sudo apt upgradegemacht - Browsercache und anderen Browser genutzt, aber bei Grafana steht immer noch Version 7.4.3 drin
Bitte auch die Ausgaben zu den Befehlen posten.
So kann man damit nix anfangen. -
Bitte auch die Ausgaben zu den Befehlen posten.
So kann man damit nix anfangen.Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Mon Apr 25 08:43:39 2022 from 192.168.178.22 pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo nano /etc/apt/sources.list.d/grafana.list pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo apt update Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://packages.grafana.com/oss/deb stable InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. pi@homebridge:~ $ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. pi@homebridge:~ $Mit besten Grüßen
Andy -
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Mon Apr 25 08:43:39 2022 from 192.168.178.22 pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo nano /etc/apt/sources.list.d/grafana.list pi@homebridge:~ $ sudo nano /etc/apt/sources.list pi@homebridge:~ $ sudo apt update Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://packages.grafana.com/oss/deb stable InRelease Hit:4 https://repos.influxdata.com/debian bullseye InRelease Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease Hit:6 https://packagecloud.io/ookla/speedtest-cli/debian bullseye InRelease Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. pi@homebridge:~ $ sudo apt upgrade Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. pi@homebridge:~ $apt policy grafana-rpi grafana
Support us
646
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge