Ältere iob Version installieren möglich?
-
Ich habe folgendes gemacht:
Auf einem neuen Raspbian Buster den iobroker mit-curl -sLf https://deb.nodesource.com/setup_12.x | sudo -E bash -
-sudo apt-get install -y nodejs-curl -sLf https://iobroker.net/install.sh | bash -
installiert.
Den iobroker soweit eingerichtet, das er startet.
Dann ein Backup von Anfang Februar wiederhergestellt,
Danach startet der iobroker nicht mehr.@atticus warum node 12.x ?
und warum überhaupt node installieren, das mach der iobroker Installer automatischspiel dein buster drauf, danach nur den iobroker installer ausführen, anschließend backup zurück spielen, wenn iobroker nicht startet, nachsehen ob die admin Instanz läuft
-
@atticus warum node 12.x ?
und warum überhaupt node installieren, das mach der iobroker Installer automatischspiel dein buster drauf, danach nur den iobroker installer ausführen, anschließend backup zurück spielen, wenn iobroker nicht startet, nachsehen ob die admin Instanz läuft
-
@crunchip ja, ich bin jetzt nicht so tief in der Matrie drin, dei Befehle hab ich mir auf diversen Webseiten gesucht.
Wie soll ich den iobroker dann am besten installieren?@atticus sagte in Ältere iob Version installieren möglich?:
Wie soll ich den iobroker dann am besten installieren?
z.b so
https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht?_=1650357365574 -
@atticus warum node 12.x ?
und warum überhaupt node installieren, das mach der iobroker Installer automatischspiel dein buster drauf, danach nur den iobroker installer ausführen, anschließend backup zurück spielen, wenn iobroker nicht startet, nachsehen ob die admin Instanz läuft
-
@atticus warum node 12.x ?
und warum überhaupt node installieren, das mach der iobroker Installer automatischspiel dein buster drauf, danach nur den iobroker installer ausführen, anschließend backup zurück spielen, wenn iobroker nicht startet, nachsehen ob die admin Instanz läuft
-
@atticus
Nachschauen.
Und mit
iobroker start adminnachhelfen.
-
@atticus
Nachschauen.
Und mit
iobroker start adminnachhelfen.
@thomas-braun :-) ok
-
@thomas-braun :-) ok
Hallo, ich hab es so gemacht, wie oben beschrieben, mit dem Ergebnis, das es es nicht funktioniert.
login as: pi pi@192.168.2.38's password: Linux raspberrypi 5.10.103-v7l+ #1529 SMP Tue Mar 8 12:24:00 GMT 2022 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Apr 13 19:53:10 2022 from 192.168.2.196 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@raspberrypi:~ $ curl -sLf https://iobroker.net/install.sh | bash - library: loaded Library version=2022-02-10 ========================================================================== Welcome to the ioBroker installer! Installer version: 2022-02-13 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== OK:1 http://archive.raspberrypi.org/debian buster InRelease Holen:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15,0 kB] Holen:3 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13, 0 MB] Es wurden 13,0 MB in 8 s geholt (1.657 kB/s). Paketlisten werden gelesen... Fertig ========================================================================== Node.js not found. Installing... ========================================================================== ## Installing the NodeSource Node.js 14.x repo... ## Populating apt-get cache... + apt-get update OK:1 http://archive.raspberrypi.org/debian buster InRelease OK:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Paketlisten werden gelesen... Fertig ## Confirming "buster" is supported... + curl -sLf -o /dev/null 'https://deb.nodesource.com/node_14.x/dists/buster/Rele ase' ## Adding the NodeSource signing key to your keyring... + curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | gpg --dearmor | tee /usr/share/keyrings/nodesource.gpg >/dev/null gpg: WARNUNG: Unsicheres Besitzverhältnis des Home-Verzeichnis `/home/pi/.gnupg' ## Creating apt sources list file for the NodeSource Node.js 14.x repo... + echo 'deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesourc e.com/node_14.x buster main' > /etc/apt/sources.list.d/nodesource.list + echo 'deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodes ource.com/node_14.x buster main' >> /etc/apt/sources.list.d/nodesource.list ## Running `apt-get update` for you... + apt-get update OK:1 http://archive.raspberrypi.org/debian buster InRelease OK:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Holen:3 https://deb.nodesource.com/node_14.x buster InRelease [4.584 B] Holen:4 https://deb.nodesource.com/node_14.x buster/main armhf Packages [780 B] Es wurden 5.364 B in 1 s geholt (4.016 B/s). Paketlisten werden gelesen... Fertig ## Run `sudo apt-get install -y nodejs` to install Node.js 14.x and npm ## You may also need development tools to build native addons: sudo apt-get install gcc g++ make ## To install the Yarn package manager, run: curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | sudo te e /usr/share/keyrings/yarnkey.gpg >/dev/null echo "deb [signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.co m/debian stable main" | sudo tee /etc/apt/sources.list.d/yarn.list sudo apt-get update && sudo apt-get install yarn Installed nodejs Node.js Installed successfully! Changing npm registry to https://registry.npmjs.org Installed acl Installed gcc-c++ Installed libavahi-compat-libdnssd-dev Installed libudev-dev Installed libpam0g-dev Installed git Installed libcairo2-dev Installed libpango1.0-dev Installed libjpeg-dev Installed libgif-dev Installed librsvg2-dev Installed python-dev Installed cmake ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== In file included from ../../nan/nan.h:58, from ../src/main.cpp:3: /home/pi/.cache/node-gyp/14.19.1/include/node/node.h:793:43: warning: cast betwe en incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node:: addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/14.19.1/include/node/node.h:827:3: note: in expansion o f macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(diskusage, Init) ^~~~~~~~~~~ In file included from ../../nan/nan.h:58, from ../src/unix_dgram.cc:5: /home/pi/.cache/node-gyp/14.19.1/include/node/node.h:793:43: warning: cast betwe en incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node:: addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/14.19.1/include/node/node.h:827:3: note: in expansion o f macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → / lib/systemd/system/iobroker.service. Autostart enabled! Fixing directory permissions... ========================================================================== ioBroker was installed successfully Open http://192.168.2.38:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console! pi@raspberrypi:~ $ iob status iobroker is running on this host. Objects type: jsonl States type: jsonl pi@raspberrypi:~ $ sudo reboot now login as: pi pi@192.168.2.38's password: Linux raspberrypi 5.10.103-v7l+ #1529 SMP Tue Mar 8 12:24:00 GMT 2022 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Tue Apr 19 11:37:36 2022 from 192.168.2.196 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@raspberrypi:~ $ iob restore backups/iobroker_2022_02_06-16_32_02_rettung_back upiobroker.tar.gz - Stop iobroker first! pi@raspberrypi:~ $ iob stop pi@raspberrypi:~ $ iob restore backups/iobroker_2022_02_06-16_32_02_rettung_back upiobroker.tar.gz - host.raspberrypi Cannot find backups/iobroker_2022_02_06-16_32_02_rettung_backup iobroker.tar.gz pi@raspberrypi:~ $ cd /opt /iobroker -bash: cd: Zu viele Argumente. pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ iob restore backups/iobroker_2022_02_06-16_32_02_ rettung_backupiobroker.tar.gz - iobroker controller daemon is not running host.raspberrypi OK. The current version of js-controller differs from the version in the backup. The js-controller version of the backup can not be restored automatically. To restore the js-controller version of the backup, execute "npm i iobroker.js-c ontroller@3.3.22 --production" inside your ioBroker directory If you really want to restore the backup with the current installed js-controlle r, execute the restore command with the --force flag pi@raspberrypi:/opt/iobroker $ iob restore backups/iobroker_2022_02_06-16_32_02_rettung_backupiobroker.tar.gz -force iobroker controller daemon is not running host.raspberrypi OK. The current version of js-controller differs from the version in the backup. The js-controller version of the backup can not be restored automatically. Note, that your backup might differ in behavior due to this version change! Removing current installation of iobroker.admin removed 27 packages in 9.184s 38 packages are looking for funding run `npm fund` for details Removing current installation of iobroker.backitup removed 125 packages in 7.686s 30 packages are looking for funding run `npm fund` for details Removing current installation of iobroker.discovery removed 43 packages in 6.044s 18 packages are looking for funding run `npm fund` for details host.raspberrypi Clear all objects and states... clean 133 objects... clean 95 states... host.raspberrypi done. host.raspberrypi Processed 0/9459 objects host.raspberrypi Processed 200/9459 objects host.raspberrypi Processed 400/9459 objects host.raspberrypi Processed 600/9459 objects host.raspberrypi Processed 800/9459 objects host.raspberrypi Processed 1000/9459 objects host.raspberrypi Processed 1200/9459 objects host.raspberrypi Processed 1400/9459 objects host.raspberrypi Processed 1600/9459 objects host.raspberrypi Processed 1800/9459 objects host.raspberrypi Processed 2000/9459 objects host.raspberrypi Processed 2200/9459 objects host.raspberrypi Processed 2400/9459 objects host.raspberrypi Processed 2600/9459 objects host.raspberrypi Processed 2800/9459 objects host.raspberrypi Processed 3000/9459 objects host.raspberrypi Processed 3200/9459 objects host.raspberrypi Processed 3400/9459 objects host.raspberrypi Processed 3600/9459 objects host.raspberrypi Processed 3800/9459 objects host.raspberrypi Processed 4000/9459 objects host.raspberrypi Processed 4200/9459 objects host.raspberrypi Processed 4400/9459 objects host.raspberrypi Processed 4600/9459 objects host.raspberrypi Processed 4800/9459 objects host.raspberrypi Processed 5000/9459 objects host.raspberrypi Processed 5200/9459 objects host.raspberrypi Processed 5400/9459 objects host.raspberrypi Processed 5600/9459 objects host.raspberrypi Processed 5800/9459 objects host.raspberrypi Processed 6000/9459 objects host.raspberrypi Processed 6200/9459 objects host.raspberrypi Processed 6400/9459 objects host.raspberrypi Processed 6600/9459 objects host.raspberrypi Processed 6800/9459 objects host.raspberrypi Processed 7000/9459 objects host.raspberrypi Processed 7200/9459 objects host.raspberrypi Processed 7400/9459 objects host.raspberrypi Processed 7600/9459 objects host.raspberrypi Processed 7800/9459 objects host.raspberrypi Processed 8000/9459 objects host.raspberrypi Processed 8200/9459 objects host.raspberrypi Processed 8400/9459 objects host.raspberrypi Processed 8600/9459 objects host.raspberrypi Processed 8800/9459 objects host.raspberrypi Processed 9000/9459 objects host.raspberrypi Processed 9200/9459 objects host.raspberrypi Processed 9400/9459 objects 9459 objects restored. host.raspberrypi Processed 0/8243 states host.raspberrypi Processed 200/8243 states host.raspberrypi Processed 400/8243 states host.raspberrypi Processed 600/8243 states host.raspberrypi Processed 800/8243 states host.raspberrypi Processed 1000/8243 states host.raspberrypi Processed 1200/8243 states host.raspberrypi Processed 1400/8243 states host.raspberrypi Processed 1600/8243 states host.raspberrypi Processed 1800/8243 states host.raspberrypi Processed 2000/8243 states host.raspberrypi Processed 2200/8243 states host.raspberrypi Processed 2400/8243 states host.raspberrypi Processed 2600/8243 states host.raspberrypi Processed 2800/8243 states host.raspberrypi Processed 3000/8243 states host.raspberrypi Processed 3200/8243 states host.raspberrypi Processed 3400/8243 states host.raspberrypi Processed 3600/8243 states host.raspberrypi Processed 3800/8243 states host.raspberrypi Processed 4000/8243 states host.raspberrypi Processed 4200/8243 states host.raspberrypi Processed 4400/8243 states host.raspberrypi Processed 4600/8243 states host.raspberrypi Processed 4800/8243 states host.raspberrypi Processed 5000/8243 states host.raspberrypi Processed 5200/8243 states host.raspberrypi Processed 5400/8243 states host.raspberrypi Processed 5600/8243 states host.raspberrypi Processed 5800/8243 states host.raspberrypi Processed 6000/8243 states host.raspberrypi Processed 6200/8243 states host.raspberrypi Processed 6400/8243 states host.raspberrypi Processed 6600/8243 states host.raspberrypi Processed 6800/8243 states host.raspberrypi Processed 7000/8243 states host.raspberrypi Processed 7200/8243 states host.raspberrypi Processed 7400/8243 states host.raspberrypi Processed 7600/8243 states host.raspberrypi Processed 7800/8243 states host.raspberrypi Processed 8000/8243 states host.raspberrypi Processed 8200/8243 states 8243 states restored. host.raspberrypi Upload user file "vis.0/AmRoa/vis-views.json host.raspberrypi Upload user file "vis.0/main/vis-views.json host.raspberrypi object system.licenses created Reinstalling adapter "admin" from "iobroker.admin@5.2.3" + iobroker.admin@5.2.3 added 84 packages from 91 contributors in 24.073s 23 packages are looking for funding run `npm fund` for details Reinstalling adapter "backitup" from "iobroker.backitup@2.2.4" + iobroker.backitup@2.2.4 added 71 packages from 53 contributors in 17.024s 27 packages are looking for funding run `npm fund` for details Forced restore - executing setup ... System successfully restored! pi@raspberrypi:/opt/iobroker $ iob start admin pi@raspberrypi:/opt/iobroker $ iob status iobroker is not running on this host. Objects type: jsonl States type: jsonl pi@raspberrypi:/opt/iobroker $Ich hab den Admin angeschoben. leider ohne Erfolg.
Was geht noch? -
Hallo, ich hab es so gemacht, wie oben beschrieben, mit dem Ergebnis, das es es nicht funktioniert.
login as: pi pi@192.168.2.38's password: Linux raspberrypi 5.10.103-v7l+ #1529 SMP Tue Mar 8 12:24:00 GMT 2022 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Wed Apr 13 19:53:10 2022 from 192.168.2.196 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@raspberrypi:~ $ curl -sLf https://iobroker.net/install.sh | bash - library: loaded Library version=2022-02-10 ========================================================================== Welcome to the ioBroker installer! Installer version: 2022-02-13 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== OK:1 http://archive.raspberrypi.org/debian buster InRelease Holen:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15,0 kB] Holen:3 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13, 0 MB] Es wurden 13,0 MB in 8 s geholt (1.657 kB/s). Paketlisten werden gelesen... Fertig ========================================================================== Node.js not found. Installing... ========================================================================== ## Installing the NodeSource Node.js 14.x repo... ## Populating apt-get cache... + apt-get update OK:1 http://archive.raspberrypi.org/debian buster InRelease OK:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Paketlisten werden gelesen... Fertig ## Confirming "buster" is supported... + curl -sLf -o /dev/null 'https://deb.nodesource.com/node_14.x/dists/buster/Rele ase' ## Adding the NodeSource signing key to your keyring... + curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | gpg --dearmor | tee /usr/share/keyrings/nodesource.gpg >/dev/null gpg: WARNUNG: Unsicheres Besitzverhältnis des Home-Verzeichnis `/home/pi/.gnupg' ## Creating apt sources list file for the NodeSource Node.js 14.x repo... + echo 'deb [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodesourc e.com/node_14.x buster main' > /etc/apt/sources.list.d/nodesource.list + echo 'deb-src [signed-by=/usr/share/keyrings/nodesource.gpg] https://deb.nodes ource.com/node_14.x buster main' >> /etc/apt/sources.list.d/nodesource.list ## Running `apt-get update` for you... + apt-get update OK:1 http://archive.raspberrypi.org/debian buster InRelease OK:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Holen:3 https://deb.nodesource.com/node_14.x buster InRelease [4.584 B] Holen:4 https://deb.nodesource.com/node_14.x buster/main armhf Packages [780 B] Es wurden 5.364 B in 1 s geholt (4.016 B/s). Paketlisten werden gelesen... Fertig ## Run `sudo apt-get install -y nodejs` to install Node.js 14.x and npm ## You may also need development tools to build native addons: sudo apt-get install gcc g++ make ## To install the Yarn package manager, run: curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | gpg --dearmor | sudo te e /usr/share/keyrings/yarnkey.gpg >/dev/null echo "deb [signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.co m/debian stable main" | sudo tee /etc/apt/sources.list.d/yarn.list sudo apt-get update && sudo apt-get install yarn Installed nodejs Node.js Installed successfully! Changing npm registry to https://registry.npmjs.org Installed acl Installed gcc-c++ Installed libavahi-compat-libdnssd-dev Installed libudev-dev Installed libpam0g-dev Installed git Installed libcairo2-dev Installed libpango1.0-dev Installed libjpeg-dev Installed libgif-dev Installed librsvg2-dev Installed python-dev Installed cmake ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== In file included from ../../nan/nan.h:58, from ../src/main.cpp:3: /home/pi/.cache/node-gyp/14.19.1/include/node/node.h:793:43: warning: cast betwe en incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node:: addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/14.19.1/include/node/node.h:827:3: note: in expansion o f macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(diskusage, Init) ^~~~~~~~~~~ In file included from ../../nan/nan.h:58, from ../src/unix_dgram.cc:5: /home/pi/.cache/node-gyp/14.19.1/include/node/node.h:793:43: warning: cast betwe en incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node:: addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/14.19.1/include/node/node.h:827:3: note: in expansion o f macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → / lib/systemd/system/iobroker.service. Autostart enabled! Fixing directory permissions... ========================================================================== ioBroker was installed successfully Open http://192.168.2.38:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console! pi@raspberrypi:~ $ iob status iobroker is running on this host. Objects type: jsonl States type: jsonl pi@raspberrypi:~ $ sudo reboot now login as: pi pi@192.168.2.38's password: Linux raspberrypi 5.10.103-v7l+ #1529 SMP Tue Mar 8 12:24:00 GMT 2022 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Tue Apr 19 11:37:36 2022 from 192.168.2.196 Wi-Fi is currently blocked by rfkill. Use raspi-config to set the country before use. pi@raspberrypi:~ $ iob restore backups/iobroker_2022_02_06-16_32_02_rettung_back upiobroker.tar.gz - Stop iobroker first! pi@raspberrypi:~ $ iob stop pi@raspberrypi:~ $ iob restore backups/iobroker_2022_02_06-16_32_02_rettung_back upiobroker.tar.gz - host.raspberrypi Cannot find backups/iobroker_2022_02_06-16_32_02_rettung_backup iobroker.tar.gz pi@raspberrypi:~ $ cd /opt /iobroker -bash: cd: Zu viele Argumente. pi@raspberrypi:~ $ cd /opt/iobroker pi@raspberrypi:/opt/iobroker $ iob restore backups/iobroker_2022_02_06-16_32_02_ rettung_backupiobroker.tar.gz - iobroker controller daemon is not running host.raspberrypi OK. The current version of js-controller differs from the version in the backup. The js-controller version of the backup can not be restored automatically. To restore the js-controller version of the backup, execute "npm i iobroker.js-c ontroller@3.3.22 --production" inside your ioBroker directory If you really want to restore the backup with the current installed js-controlle r, execute the restore command with the --force flag pi@raspberrypi:/opt/iobroker $ iob restore backups/iobroker_2022_02_06-16_32_02_rettung_backupiobroker.tar.gz -force iobroker controller daemon is not running host.raspberrypi OK. The current version of js-controller differs from the version in the backup. The js-controller version of the backup can not be restored automatically. Note, that your backup might differ in behavior due to this version change! Removing current installation of iobroker.admin removed 27 packages in 9.184s 38 packages are looking for funding run `npm fund` for details Removing current installation of iobroker.backitup removed 125 packages in 7.686s 30 packages are looking for funding run `npm fund` for details Removing current installation of iobroker.discovery removed 43 packages in 6.044s 18 packages are looking for funding run `npm fund` for details host.raspberrypi Clear all objects and states... clean 133 objects... clean 95 states... host.raspberrypi done. host.raspberrypi Processed 0/9459 objects host.raspberrypi Processed 200/9459 objects host.raspberrypi Processed 400/9459 objects host.raspberrypi Processed 600/9459 objects host.raspberrypi Processed 800/9459 objects host.raspberrypi Processed 1000/9459 objects host.raspberrypi Processed 1200/9459 objects host.raspberrypi Processed 1400/9459 objects host.raspberrypi Processed 1600/9459 objects host.raspberrypi Processed 1800/9459 objects host.raspberrypi Processed 2000/9459 objects host.raspberrypi Processed 2200/9459 objects host.raspberrypi Processed 2400/9459 objects host.raspberrypi Processed 2600/9459 objects host.raspberrypi Processed 2800/9459 objects host.raspberrypi Processed 3000/9459 objects host.raspberrypi Processed 3200/9459 objects host.raspberrypi Processed 3400/9459 objects host.raspberrypi Processed 3600/9459 objects host.raspberrypi Processed 3800/9459 objects host.raspberrypi Processed 4000/9459 objects host.raspberrypi Processed 4200/9459 objects host.raspberrypi Processed 4400/9459 objects host.raspberrypi Processed 4600/9459 objects host.raspberrypi Processed 4800/9459 objects host.raspberrypi Processed 5000/9459 objects host.raspberrypi Processed 5200/9459 objects host.raspberrypi Processed 5400/9459 objects host.raspberrypi Processed 5600/9459 objects host.raspberrypi Processed 5800/9459 objects host.raspberrypi Processed 6000/9459 objects host.raspberrypi Processed 6200/9459 objects host.raspberrypi Processed 6400/9459 objects host.raspberrypi Processed 6600/9459 objects host.raspberrypi Processed 6800/9459 objects host.raspberrypi Processed 7000/9459 objects host.raspberrypi Processed 7200/9459 objects host.raspberrypi Processed 7400/9459 objects host.raspberrypi Processed 7600/9459 objects host.raspberrypi Processed 7800/9459 objects host.raspberrypi Processed 8000/9459 objects host.raspberrypi Processed 8200/9459 objects host.raspberrypi Processed 8400/9459 objects host.raspberrypi Processed 8600/9459 objects host.raspberrypi Processed 8800/9459 objects host.raspberrypi Processed 9000/9459 objects host.raspberrypi Processed 9200/9459 objects host.raspberrypi Processed 9400/9459 objects 9459 objects restored. host.raspberrypi Processed 0/8243 states host.raspberrypi Processed 200/8243 states host.raspberrypi Processed 400/8243 states host.raspberrypi Processed 600/8243 states host.raspberrypi Processed 800/8243 states host.raspberrypi Processed 1000/8243 states host.raspberrypi Processed 1200/8243 states host.raspberrypi Processed 1400/8243 states host.raspberrypi Processed 1600/8243 states host.raspberrypi Processed 1800/8243 states host.raspberrypi Processed 2000/8243 states host.raspberrypi Processed 2200/8243 states host.raspberrypi Processed 2400/8243 states host.raspberrypi Processed 2600/8243 states host.raspberrypi Processed 2800/8243 states host.raspberrypi Processed 3000/8243 states host.raspberrypi Processed 3200/8243 states host.raspberrypi Processed 3400/8243 states host.raspberrypi Processed 3600/8243 states host.raspberrypi Processed 3800/8243 states host.raspberrypi Processed 4000/8243 states host.raspberrypi Processed 4200/8243 states host.raspberrypi Processed 4400/8243 states host.raspberrypi Processed 4600/8243 states host.raspberrypi Processed 4800/8243 states host.raspberrypi Processed 5000/8243 states host.raspberrypi Processed 5200/8243 states host.raspberrypi Processed 5400/8243 states host.raspberrypi Processed 5600/8243 states host.raspberrypi Processed 5800/8243 states host.raspberrypi Processed 6000/8243 states host.raspberrypi Processed 6200/8243 states host.raspberrypi Processed 6400/8243 states host.raspberrypi Processed 6600/8243 states host.raspberrypi Processed 6800/8243 states host.raspberrypi Processed 7000/8243 states host.raspberrypi Processed 7200/8243 states host.raspberrypi Processed 7400/8243 states host.raspberrypi Processed 7600/8243 states host.raspberrypi Processed 7800/8243 states host.raspberrypi Processed 8000/8243 states host.raspberrypi Processed 8200/8243 states 8243 states restored. host.raspberrypi Upload user file "vis.0/AmRoa/vis-views.json host.raspberrypi Upload user file "vis.0/main/vis-views.json host.raspberrypi object system.licenses created Reinstalling adapter "admin" from "iobroker.admin@5.2.3" + iobroker.admin@5.2.3 added 84 packages from 91 contributors in 24.073s 23 packages are looking for funding run `npm fund` for details Reinstalling adapter "backitup" from "iobroker.backitup@2.2.4" + iobroker.backitup@2.2.4 added 71 packages from 53 contributors in 17.024s 27 packages are looking for funding run `npm fund` for details Forced restore - executing setup ... System successfully restored! pi@raspberrypi:/opt/iobroker $ iob start admin pi@raspberrypi:/opt/iobroker $ iob status iobroker is not running on this host. Objects type: jsonl States type: jsonl pi@raspberrypi:/opt/iobroker $Ich hab den Admin angeschoben. leider ohne Erfolg.
Was geht noch?@atticus sagte in Ältere iob Version installieren möglich?:
, ich hab es so gemacht, wie oben beschrieben,
hast du auch beachtet was der Fixer sagt
@atticus sagte in Ältere iob Version installieren möglich?:
You need to re-login before doing anything else on the console!
-
@atticus sagte in Ältere iob Version installieren möglich?:
, ich hab es so gemacht, wie oben beschrieben,
hast du auch beachtet was der Fixer sagt
@atticus sagte in Ältere iob Version installieren möglich?:
You need to re-login before doing anything else on the console!
@homoran ja, sorry, leichte entwarnung, ich das Gerät jetzt zwei mal neu gestartet, und siehe da, der iobroker läuft, die Scripte sind zu sehen. War nur lieder in zu frühes BAckup, muss noch ein anderes wiederherstellen. Aber jetzt weiß ich ja, wie es geht.
Nur noch ein winzig kleines Problem:
Was mach ich dagegen?
-
@homoran ja, sorry, leichte entwarnung, ich das Gerät jetzt zwei mal neu gestartet, und siehe da, der iobroker läuft, die Scripte sind zu sehen. War nur lieder in zu frühes BAckup, muss noch ein anderes wiederherstellen. Aber jetzt weiß ich ja, wie es geht.
Nur noch ein winzig kleines Problem:
Was mach ich dagegen?
-
@rushmed ja, kann man nicht.
-
@rushmed aber dafür kannst du sie ja mittels backitup extra sichern
-
@crunchip Danke!
@Atticus du hast nicht zufällig deine Scripte separat mit Backitup gesichert so dass du nir die statt des gesamten Backups wiederherstellen kannst?
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden323
Online32.9k
Benutzer83.0k
Themen1.3m
Beiträge