UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[apollon77]

@da_woody Ja jetzt kommt ja auch kein "can not lock database" - das war darauf bezogen.

Ok, welche Version ist da denn jetzt drauf wirklich? Es gibt noch eine Idee die ich habe weil es ja jsonl ist.

editiere /opt/iobroekr/iobroker-data/iobroker.json und schauee dort beide stellen wo ein "connectTiemout" steht und schreibe dort 5000 rein falls 2000 drin steht. Das war früher mal ein Issue - ist ab der 4.0.10 erledigt weil wir dann mindestens 5s warten :-)

Danach nochmal versuchen

[da_Woody]

@apollon77 gute frage, will einfach nicht starten...

woody@ioBroker:/opt/iobroker$ iob start
woody@ioBroker:/opt/iobroker$ iob status
internal/modules/cjs/loader.js:905
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:902:15)
    at Function.Module._load (internal/modules/cjs/loader.js:746:27)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:75:12)
    at internal/main/run_main_module.js:17:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}
woody@ioBroker:/opt/iobroker$

[apollon77]

@da_woody Naja das liegt daran das der npm install es kaputt gemacht hat ... als müssen wir da anfangen

[da_Woody]

@apollon77 muss kurz mit dem hund raus, bin aber zu jeder schandtat bereit... ;)

[apollon77]

@da_woody siehe oben connectTimeout auf 500 setzen, nochmal versuchen

[Homoran]

@apollon77 sagte in massive CPU Auslastung:

siehe oben connectTimeout auf 500 setzen

5000, oder?

[da_Woody]

@homoran klar, war auch ein tippfehler drinnen...
@apollon77 keine änderung...

gerade mal mit winscp geschaut. das verzeichniss /opt/iobroker/node_modules/iobroker.js-controller/iobroker.js gibts nicht.

[da_Woody]

@da_woody was ich aber gefunden habe:
/opt/iobroker/node_modules/iobroker.backitup/lib/restore/iobroker.js
/home/woody/node_modules/iobroker.js-controller/iobroker.js

[apollon77]

@da_woody sagte in massive CPU Auslastung:

/home/woody/node_modules/iobroker.js-controller/iobroker.js

Naja das ist der Additional controller den Du dir weiter oben mal selbst verpasst hast. Das sollte aber egal sein.

Schreib mal anstelle 5000 eine 10000 an beiden stellen mit connectTimeout rein!! Dann ist die Frage wartet er ca. 10s bevor der Fehler kommt oder kürzer?

[da_Woody]

@apollon77 beide connectTimeout auf 10000 geändert, gespeichert. nach iob start ist der prompt sofort wieder da max 1sec. keine 10sec.

woody@ioBroker:~$ iob start
woody@ioBroker:~$ iob status
internal/modules/cjs/loader.js:905
  throw err;
  ^

Error: Cannot find module '/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (internal/modules/cjs/loader.js:902:15)
    at Function.Module._load (internal/modules/cjs/loader.js:746:27)
    at Function.executeUserEntryPoint [as runMain] (internal/modules/run_main.js:75:12)
    at internal/main/run_main_module.js:17:47 {
  code: 'MODULE_NOT_FOUND',
  requireStack: []
}
woody@ioBroker:~$

[apollon77]

@da_woody Grmmppfffff ... du solltest ein "npm install iobroker.js-controller@3.3.22 --production" versuchen. Der kann nicht starten weil er grad nicht installiert ist. Also erstmal installieren und da gabs den "Connot connect to DB "Fehler

[da_Woody]

@apollon77 sorry... :D
ok

woody@ioBroker:~$ npm install iobroker.js-controller@3.3.22 --production

> iobroker.js-controller@3.3.22 preinstall /home/woody/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.14.16

> iobroker.js-controller@3.3.22 install /home/woody/node_modules/iobroker.js-controller
> node iobroker.js setup first

object _design/custom updated
object _design/system updated

ATTENTION: Error reporting via Sentry will be activated on next start of ioBroker

ioBroker wants to make sure to deliver the most stable smart home system.
To allow this we decided to implement an automatic error and crash reporting solution into the js-controller and also into adapters.

THIS REPORTING WILL BE ENABLED WITH THE NEXT START OF YOUR IOBROKER!

For any error that leads to the crash of the js-controller or one of the relevant adapters the error details are send to a server. For the js-controller and core adapters this server is located and operated in germany. For community adapters please check the Github Readme of the affected adapter for details which Sentry server is used.

If you want to disable the error reporting you can use the command
'iobroker plugin disable sentry'
This command will also make sure that no adapter that runs on this host will send crash reporting data to sentry.


npm WARN saveError ENOENT: no such file or directory, open '/home/woody/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/home/woody/package.json'
npm WARN woody No description
npm WARN woody No repository field.
npm WARN woody No README data
npm WARN woody No license field.
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"})

+ iobroker.js-controller@3.3.22
updated 1 package and audited 485 packages in 8.91s

12 packages are looking for funding
  run `npm fund` for details

found 21 vulnerabilities (13 low, 5 moderate, 3 high)
  run `npm audit fix` to fix them, or `npm audit` for details
woody@ioBroker:~$

sieht mal nicht so schlecht aus... denk ich mal.
was bedeutet das run npm audit fix to fix them, or npm audit for details jetzt? soll ich den fix ausführen vor iob start?
ich kann diese meldungen nicht wirklich interpretieren ob notwendig, oder nicht.

[apollon77]

@da_woody sagte in massive CPU Auslastung:

/home/woody/

Jetzt haste es wieder in deinem Home Dir ausgeführt und nicht in /opt/iobroker ... also nochmal bitte an deer richtigen Stelle.

npm audit ... ignorieren bzw wenn alles wieder tut machste einmal "iob fix" und das kommt eh nie wieder

[da_Woody]

@apollon77 oh mann. die shell geschichten treiben mich noch ins irrenhaus.

woody@ioBroker:/opt/iobroker$ npm install iobroker.js-controller@3.3.22 --production

> iobroker.js-controller@3.3.22 preinstall /opt/iobroker/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.14.16

> iobroker.js-controller@3.3.22 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

Server Cannot start inMem-states on port 9000: Failed to lock DB file "/opt/iobroker/iobroker-data/states.jsonl"!
npm WARN xmlhttprequest-ts@1.0.1 requires a peer of @angular/common@>= 5.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN xmlhttprequest-ts@1.0.1 requires a peer of @angular/core@>= 5.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@2.3.2 (node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.2: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"})
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: osx-temperature-sensor@1.0.7 (node_modules/osx-temperature-sensor):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for osx-temperature-sensor@1.0.7: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"x64"})

npm ERR! code ELIFECYCLE
npm ERR! errno 24
npm ERR! iobroker.js-controller@3.3.22 install: `node iobroker.js setup first`
npm ERR! Exit status 24
npm ERR!
npm ERR! Failed at the iobroker.js-controller@3.3.22 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-02-16T15_24_17_456Z-debug.log
woody@ioBroker:/opt/iobroker$

jetzt kommen wieder die errors und plötzlich port 9000?

[apollon77]

@da_woody Ok, versuch mal ob er vllt den 4.0.10 installiert manuell ... so langsam gehen mir die ideeen aus ... und du bist sicher das nicht iiiiirgendwas auf der kiste noch läuft?

[opossum]

Hallo, @apollon77,

sorry, wenn ich mich hier reinhänge. Ich könnte anbieten, mit @da_Woody via Telefon und Anydesk die VM und den ioB neu aufzusetzen. Dann erst mal sein Backup zurückspielen und dann erst den Contoller 4.0.10. Habe ihm das auch per Chat angeboten. VM aufsetzen und IOB installieren dauert ja nicht lange. Da hätte man dann erst einmal eine "Grundstock", mit dem man arbeiten könnte. Ginge auch sofort.

[apollon77]

@opossum So etwas wäre mein nächster Vorshclag gewesen ... Und eine super Idee. Ist natürlich @da_Woody entscheiden, aber vielen Dank für das Angebot von mir in jedem Fall!

[da_Woody]

@apollon77 sagte in massive CPU Auslastung:

und du bist sicher das nicht iiiiirgendwas auf der kiste noch läuft?

login as: woody
woody@192.168.0.250's password:
Linux ioBroker 4.19.0-18-amd64 #1 SMP Debian 4.19.208-1 (2021-09-29) x86_64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Feb 16 16:18:11 2022 from 192.168.7.209
woody@ioBroker:~$ cd /opt/iobroker
woody@ioBroker:/opt/iobroker$ ps auxww|grep io
root        12  0.0  0.0      0     0 ?        S    16:17   0:00 [migration/0]
root        16  0.0  0.0      0     0 ?        S    16:17   0:00 [migration/1]
root       212  0.0  0.0      0     0 ?        I<   16:17   0:00 [rpciod]
root       215  0.0  0.0      0     0 ?        I<   16:17   0:00 [xprtiod]
message+   370  0.0  0.0   9100  4280 ?        Ss   16:17   0:07 /usr/bin/dbus-daemon --system --address=systemd: --nofork -                                                                  -nopidfile --systemd-activation --syslog-only
woody    11698  0.0  0.0   6088   888 pts/1    S+   21:12   0:00 grep io
woody@ioBroker:/opt/iobroker$ ps auxww|grep backup
woody    11732  0.0  0.0   6088   888 pts/1    S+   21:12   0:00 grep backup
woody@ioBroker:/opt/iobroker$

sieht für mich nicht danach aus...

versucht mit 4.0.10. auch nicht. hab aber das log mal rausgefischt das am schluß angegeben ist. vllt hilft das?

0 info it worked if it ends with ok
1 verbose cli [
1 verbose cli   '/usr/bin/node',
1 verbose cli   '/usr/bin/npm',
1 verbose cli   'install',
1 verbose cli   'iobroker.js-controller@4.0.10',
1 verbose cli   '--production'
1 verbose cli ]
2 info using npm@6.14.16
3 info using node@v14.19.0
4 verbose npm-session ec259e75475dbf14
5 silly install loadCurrentTree
6 silly install readLocalPackageData
7 http fetch GET 200 https://registry.npmjs.org/iobroker.js-controller 1004ms
8 http fetch GET 200 https://registry.npmjs.org/iobroker.js-controller/-/iobroker.js-controller-4.0.10.tgz 97ms
9 silly pacote version manifest for iobroker.js-controller@4.0.10 fetched in 1127ms
10 timing stage:loadCurrentTree Completed in 3105ms
11 silly install loadIdealTree
12 silly install cloneCurrentTreeToIdealTree
13 timing stage:loadIdealTree:cloneCurrentTree Completed in 29ms
14 silly install loadShrinkwrap
15 timing stage:loadIdealTree:loadShrinkwrap Completed in 1076ms
16 silly install loadAllDepsIntoIdealTree
17 silly resolveWithNewModule iobroker.js-controller@4.0.10 checking installable status
18 silly removeObsoleteDep removing iobroker.js-controller@4.0.9 from the tree as its been replaced by a newer version or is no longer required
19 silly removeObsoleteDep removing @alcalzone/esbuild-register@2.5.1-1 from the tree as its been replaced by a newer version or is no longer required
20 silly removeObsoleteDep removing esbuild@0.11.23 from the tree as its been replaced by a newer version or is no longer required
21 silly removeObsoleteDep removing jsonc-parser@3.0.0 from the tree as its been replaced by a newer version or is no longer required
22 silly removeObsoleteDep removing @iobroker/js-controller-adapter@4.0.9 from the tree as its been replaced by a newer version or is no longer required
23 silly removeObsoleteDep removing node-schedule@2.1.0 from the tree as its been replaced by a newer version or is no longer required
24 silly removeObsoleteDep removing cron-parser@3.5.0 from the tree as its been replaced by a newer version or is no longer required
25 silly removeObsoleteDep removing luxon@1.28.0 from the tree as its been replaced by a newer version or is no longer required
26 silly removeObsoleteDep removing semver@7.3.5 from the tree as its been replaced by a newer version or is no longer required
27 silly removeObsoleteDep removing @iobroker/js-controller-cli@4.0.9 from the tree as its been replaced by a newer version or is no longer required
28 silly removeObsoleteDep removing debug@4.3.3 from the tree as its been replaced by a newer version or is no longer required
29 silly removeObsoleteDep removing ms@2.1.2 from the tree as its been replaced by a newer version or is no longer required
30 silly removeObsoleteDep removing @iobroker/js-controller-common-db@4.0.9 from the tree as its been replaced by a newer version or is no longer required
31 silly removeObsoleteDep removing @iobroker/db-objects-file@4.0.9 from the tree as its been replaced by a newer version or is no longer required
32 silly removeObsoleteDep removing @iobroker/db-base@4.0.9 from the tree as its been replaced by a newer version or is no longer required
33 silly removeObsoleteDep removing @iobroker/js-controller-common@4.0.9 from the tree as its been replaced by a newer version or is no longer required
34 silly removeObsoleteDep removing @alcalzone/pak@0.7.0 from the tree as its been replaced by a newer version or is no longer required
35 silly removeObsoleteDep removing execa@5.1.1 from the tree as its been replaced by a newer version or is no longer required
36 silly removeObsoleteDep removing cross-spawn@7.0.3 from the tree as its been replaced by a newer version or is no longer required
37 silly removeObsoleteDep removing path-key@3.1.1 from the tree as its been replaced by a newer version or is no longer required
38 silly removeObsoleteDep removing shebang-command@2.0.0 from the tree as its been replaced by a newer version or is no longer required
39 silly removeObsoleteDep removing shebang-regex@3.0.0 from the tree as its been replaced by a newer version or is no longer required
40 silly removeObsoleteDep removing get-stream@6.0.1 from the tree as its been replaced by a newer version or is no longer required
41 silly removeObsoleteDep removing human-signals@2.1.0 from the tree as its been replaced by a newer version or is no longer required
42 silly removeObsoleteDep removing merge-stream@2.0.0 from the tree as its been replaced by a newer version or is no longer required
43 silly removeObsoleteDep removing npm-run-path@4.0.1 from the tree as its been replaced by a newer version or is no longer required
44 silly removeObsoleteDep removing onetime@5.1.2 from the tree as its been replaced by a newer version or is no longer required
45 silly removeObsoleteDep removing mimic-fn@2.1.0 from the tree as its been replaced by a newer version or is no longer required

[Jabba_the_Hutt]

nachdem ja der Port 9000 blockiert war/ist ...

was bringt

sudo netstat -tulpen | grep -i 9000

[da_Woody]

@jabba_the_hutt moin. jetzt gar nichts mehr... :D
gestern spät abends noch mit @opossum rumgefummelt. wir hatten schon eine neue VM fertig mit backup, mussten dann aber feststellen, daß das backup zu jung war. war schon auf jsonl. dann drauf gepfiffen und die ioBroker VMs platt gemacht.
nachdem dann auch noch proxmox rumgezickt hat, ich konnte keine IP an die MAC binden, haben wir dann aufgehört und machen heute weiter.
inzwischen hab ich mal eine debian11 VM mit richtiger IP. kurze nacht...