Test Adapter shuttercontrol v2.0.x

Negalein

PS: Ical dürfte hier irrelevant sein, da es nur für den Kinderbereich aktiviert wurde. Da passt es auch!
Nur im Wohn- und Schlafbereich ist es nicht aktiv, schaltet aber trotzdem zu Ferienzeiten.

Dirk Peter

@simatec
Hallo, erstmal die Rollläden fahren wie sie sollen.
Was mir aber neuerdings auffällt unter autoState erscheint bei mir jetzt none bei einigen Rollläden.
allgemein:

Version: shuttercontrol 1.4.8
Rollläden fahren 22 - 25s, ist so im HmIPW-DRBL4 auch hinterlegt
Wartezeit für die Überprüfung des Rollladenstatus: 60s
verwendete Actoren: HmIPW-DRBL4

Screenshot 2021-12-28 094810.jpg

2021-12-28 07:30:00.013 - debug: shuttercontrol.0 (15303) calculate astrodata ...
2021-12-28 07:30:00.014 - debug: shuttercontrol.0 (15303) Sun Azimut: 118.6°
2021-12-28 07:30:00.015 - debug: shuttercontrol.0 (15303) Sun Elevation: -7.5°
2021-12-28 07:30:00.051 - debug: shuttercontrol.0 (15303) start pendingAlarm to check if an alarm is currently pending (exept frost)
2021-12-28 07:30:00.117 - debug: shuttercontrol.0 (15303) status alarm pending for hm-rpc.1.00165BE99E4FF0.10.LEVEL: false
2021-12-28 07:30:00.144 - info: host.tinkerboard instance system.adapter.daswetter.0 started with pid 19321
2021-12-28 07:30:00.171 - info: shuttercontrol.0 (15303) Children Up #22 Set ID: HmIPW-DRBL4 DG-KZ-1-1 value: 100%
2021-12-28 07:30:00.181 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-1 Old value = 100. New value = 100. automatic is active
2021-12-28 07:30:00.232 - debug: shuttercontrol.0 (15303) last automatic Action for HmIPW-DRBL4 DG-KZ-1-1: up_ChidrenTime
2021-12-28 07:30:00.233 - debug: shuttercontrol.0 (15303) shutterUpChildren #2 HmIPW-DRBL4 DG-KZ-1-1 old height: 100% new height: 100%
2021-12-28 07:30:00.244 - debug: shuttercontrol.0 (15303) Brightness State Down is: false
2021-12-28 07:30:00.439 - debug: shuttercontrol.0 (15303) Shutter state changed: HmIPW-DRBL4 DG-KZ-1-1 old value = 100 new value = 25
2021-12-28 07:30:02.166 - info: daswetter.0 (19321) starting. Version 3.0.9 in /opt/iobroker/node_modules/iobroker.daswetter, node: v14.18.2, js-controller: 3.3.22
2021-12-28 07:30:07.812 - info: daswetter.0 (19321) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2021-12-28 07:30:08.332 - info: daswetter.0 (19321) cleaned everything up...
2021-12-28 07:30:08.345 - info: host.tinkerboard instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-12-28 07:30:10.234 - debug: shuttercontrol.0 (15303) start pendingAlarm to check if an alarm is currently pending (exept frost)
2021-12-28 07:30:10.279 - debug: shuttercontrol.0 (15303) status alarm pending for hm-rpc.1.00165BE99E4FF0.14.LEVEL: false
2021-12-28 07:30:10.323 - info: shuttercontrol.0 (15303) Children Up #22 Set ID: HmIPW-DRBL4 DG-KZ-1-2 value: 100%
2021-12-28 07:30:10.341 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-2 Old value = 100. New value = 100. automatic is active
2021-12-28 07:30:10.390 - debug: shuttercontrol.0 (15303) last automatic Action for HmIPW-DRBL4 DG-KZ-1-2: up_ChidrenTime
2021-12-28 07:30:10.391 - debug: shuttercontrol.0 (15303) shutterUpChildren #2 HmIPW-DRBL4 DG-KZ-1-2 old height: 100% new height: 100%
2021-12-28 07:30:10.562 - debug: shuttercontrol.0 (15303) Shutter state changed: HmIPW-DRBL4 DG-KZ-1-2 old value = 100 new value = 25
2021-12-28 07:30:20.391 - debug: shuttercontrol.0 (15303) start pendingAlarm to check if an alarm is currently pending (exept frost)
2021-12-28 07:30:20.435 - debug: shuttercontrol.0 (15303) status alarm pending for hm-rpc.1.00165BE99E4FEB.2.LEVEL: false
2021-12-28 07:30:20.479 - info: shuttercontrol.0 (15303) Children Up #22 Set ID: HmIPW-DRBL4 DG-KZ-2-1 value: 100%
2021-12-28 07:30:20.488 - debug: shuttercontrol.0 (15303) Shutter state changed: HmIPW-DRBL4 DG-KZ-2-1 old value = 25 new value = 100
2021-12-28 07:30:20.489 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-2-1 Old value = 25. New value = 100. automatic is active
2021-12-28 07:30:20.543 - debug: shuttercontrol.0 (15303) last automatic Action for HmIPW-DRBL4 DG-KZ-2-1: up_ChidrenTime
2021-12-28 07:30:20.544 - debug: shuttercontrol.0 (15303) shutterUpChildren #2 HmIPW-DRBL4 DG-KZ-2-1 old height: 25% new height: 100%
2021-12-28 07:30:24.177 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-1 Old value = 100. New value = 100. automatic is active
2021-12-28 07:30:30.544 - debug: shuttercontrol.0 (15303) start pendingAlarm to check if an alarm is currently pending (exept frost)
2021-12-28 07:30:30.591 - debug: shuttercontrol.0 (15303) status alarm pending for hm-rpc.1.00165BE99E4FEB.6.LEVEL: false
2021-12-28 07:30:30.635 - info: shuttercontrol.0 (15303) Children Up #22 Set ID: HmIPW-DRBL4 DG-KZ-2-2 value: 100%
2021-12-28 07:30:30.644 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-2-2 Old value = 100. New value = 100. automatic is active
2021-12-28 07:30:30.695 - debug: shuttercontrol.0 (15303) last automatic Action for HmIPW-DRBL4 DG-KZ-2-2: up_ChidrenTime
2021-12-28 07:30:30.696 - debug: shuttercontrol.0 (15303) shutterUpChildren #2 HmIPW-DRBL4 DG-KZ-2-2 old height: 100% new height: 100%
2021-12-28 07:30:30.865 - debug: shuttercontrol.0 (15303) Shutter state changed: HmIPW-DRBL4 DG-KZ-2-2 old value = 100 new value = 25
2021-12-28 07:30:32.813 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-2 Old value = 100. New value = 100. automatic is active
2021-12-28 07:30:42.860 - debug: shuttercontrol.0 (15303) Shutter state changed: HmIPW-DRBL4 DG-KZ-2-1 old value = 25 new value = 100
2021-12-28 07:30:42.860 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-2-1 Old value = 25. New value = 100. automatic is active
2021-12-28 07:30:51.393 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-2-2 Old value = 100. New value = 100. automatic is active
2021-12-28 07:31:00.443 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-1 drived manually to 25. Old value = 100. New value = 25
2021-12-28 07:31:00.443 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-1 Updated trigger action to Manu_Mode to prevent moving after window close
2021-12-28 07:31:05.197 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-1 opened manually to 100. Old value = 100. New value = 100. Possibility to activate sunprotect enabled.
2021-12-28 07:31:10.566 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-2 drived manually to 25. Old value = 100. New value = 25
2021-12-28 07:31:10.566 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-2 Updated trigger action to Manu_Mode to prevent moving after window close
2021-12-28 07:31:15.360 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-1-2 opened manually to 100. Old value = 100. New value = 100. Possibility to activate sunprotect enabled.
2021-12-28 07:31:30.870 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-2-2 drived manually to 25. Old value = 100. New value = 25
2021-12-28 07:31:30.871 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-2-2 Updated trigger action to Manu_Mode to prevent moving after window close
2021-12-28 07:31:35.651 - debug: shuttercontrol.0 (15303) HmIPW-DRBL4 DG-KZ-2-2 opened manually to 100. Old value = 100. New value = 100. Possibility to activate sunprotect enabled.

MfG Dirk Peter

Dirk Peter

@simatec
Hallo, und so sieht es heute Abend aus!
Screenshot 2021-12-28 171518.jpg
Und wie gesagt, fahren tuen sie, so wie eingegeben mit Ferienprogramm, Frostschutz usw..
Danke für deine tolle Arbeit,
mfG Dirk Peter

FoxRo

@dirk-peter
Der Status ‚none‘ ist vom Shuttercontrol gesetzt, wenn er in der Nacht die Stati zurück setzt. Wenn dies am Morgen noch so steht heisst das nichts anderes, als dass mit dem Rollo noch nichts passiert ist.
Hoffe dies hilft dir weiter.

simatec

@dirk-peter Bitte teste mal die Version 1.4.9
Dein Problem sollte damit behoben sein

simatec

@negalein Bitte teste mal die Version 1.4.9
Hier sollten jetzt bei Feiertagen die Bereiche korrekt angesteuert werden

simatec

@martybr Bitte teste mal die Version 1.4.9
Jetzt sollten alle States korrekt gesetzt werden

Negalein

@simatec sagte in Test Adapter shuttercontrol v1.4.x:

Bitte teste mal die Version 1.4.9

du meinst 1.4.8? Die 1.4.9 bekomm ich nicht.

Dein Problem sollte damit behoben sein

Danke, funktioniert! :)

simatec

@negalein 1.4.9 wird gerade gepusht

simatec

Ab sofort steht die Version 1.4.9 auf Github in in kürze auch im latest zum testen zur Verfügung.

Changelog

1.4.9 (2021-12-29)

(simatec) error handling for trigger added
(simatec) Bugfix Trigger delay
(simatec) Dependencies updated
(simatec) Dev-Dependencies updated

Negalein

@simatec sagte in Test Adapter shuttercontrol v1.4.x:

1.4.9 wird gerade gepusht

ist nun da :)

simatec

@negalein jup das Testing vorm pushen braucht immer ein paar Minuten

MartyBr

@simatec
Ich habe das Update auf beiden System (Prod. und Test) eingespielt. Ich habe mit Closeall alle Rollos in einen definierten Zustand (down) gebracht. Nun lasse ich den Tag über das System laufen und warte dann auch die Weihnachtseinstellung heute Abend ab. Eine Rückmeldung gebe ich die danach.

Vielen Dank und dir einen guten Tag.

Nightfly1983

Hallo ihr fleißigen Entwickler, ich habe das Szenario mit dem Frost Problem erneut nachstellen können.
Nochmal zur Verdeutlichung, ich habe den Frostalarm auf Höhe 15 eingestellt, der bei jedem Fenster greifen soll, wenn ein Datenpunkt, welcher über ein Script gesetzt wird, angesteuert wird.
Problem ist, wenn dieser nicht auf true steht, also kein Frost mehr ist und es tagsüber ist, dann fahren die Rollos komplett auf, auch wenn ein Rollo mal manuell verfahren wurde.

Weiß nicht ob in dem Log da was ersichtlich wird.

shuttercontrol.0
	2021-12-29 10:21:44.374	debug	shutter alarm frost endet and no other alarm is pending HWR already at: 98% - setting current action: up
shuttercontrol.0
	2021-12-29 10:21:44.358	debug	status alarm pending for alias.0.HWR.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:21:44.357	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:21:34.356	debug	shutter alarm frost endet and no other alarm is pending Buero old height: 74% new height: 98%
shuttercontrol.0
	2021-12-29 10:21:34.270	debug	Buero Old value = 74. New value = 98. automatic is active
shuttercontrol.0
	2021-12-29 10:21:34.270	debug	Shutter state changed: Buero old value = 74 new value = 98
shuttercontrol.0
	2021-12-29 10:21:34.247	info	Alarm frost ended Set ID: Buero value: 98%
shuttercontrol.0
	2021-12-29 10:21:34.236	debug	status alarm pending for alias.0.Büro.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:21:34.236	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:21:34.236	debug	start shutterAlarm
shuttercontrol.0
	2021-12-29 10:21:34.236	debug	Alarm Frost changed: false
shuttercontrol.0
	2021-12-29 10:20:41.452	debug	status alarm pending for alias.0.Esszimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:20:41.451	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:31.441	debug	status alarm pending for alias.0.Kueche.Rollo_Balkontür.SET: false
shuttercontrol.0
	2021-12-29 10:20:31.441	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:25.314	debug	status alarm pending for alias.0.Wohnzimmer.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:20:25.314	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:21.429	debug	status alarm pending for alias.0.Kueche.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:20:21.428	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:15.110	debug	status alarm pending for alias.0.Sauna.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:20:15.110	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:12.090	debug	status alarm pending for alias.0.HWR.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:20:12.089	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:11.344	debug	status alarm pending for alias.0.WC.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:20:11.344	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:05.104	debug	status alarm pending for alias.0.Schlafzimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:20:05.104	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:02.073	debug	status alarm pending for alias.0.Büro.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:20:02.072	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:01.320	debug	status alarm pending for alias.0.HWR.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:20:01.320	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:20:00.030	debug	Sun Elevation: 12.1°
shuttercontrol.0
	2021-12-29 10:20:00.029	debug	Sun Azimut: 154.5°
shuttercontrol.0
	2021-12-29 10:20:00.028	debug	calculate astrodata ...
shuttercontrol.0
	2021-12-29 10:19:55.085	debug	status alarm pending for alias.0.Kind_Ost.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:55.085	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:54.786	debug	status alarm pending for alias.0.Wohnzimmer.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:19:54.785	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:51.303	debug	status alarm pending for alias.0.Büro.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:51.303	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:49.302	debug	insidetemperature changed: alias.0.Büro.Temperatur.ACTUAL Value: 19.84
shuttercontrol.0
	2021-12-29 10:19:45.071	debug	status alarm pending for alias.0.Kind_West.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:45.070	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:44.777	debug	status alarm pending for alias.0.Sauna.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:44.777	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:35.055	debug	status alarm pending for alias.0.Bad.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:35.055	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:34.695	debug	status alarm pending for alias.0.Schlafzimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:34.695	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:24.966	debug	status alarm pending for alias.0.Esszimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:24.965	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:24.672	debug	status alarm pending for alias.0.Kind_Ost.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:24.672	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:14.955	debug	status alarm pending for alias.0.Kueche.Rollo_Balkontür.SET: false
shuttercontrol.0
	2021-12-29 10:19:14.954	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:14.655	debug	status alarm pending for alias.0.Kind_West.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:14.654	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:04.946	debug	status alarm pending for alias.0.Kueche.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:19:04.945	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:19:04.643	debug	status alarm pending for alias.0.Bad.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:19:04.642	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:54.926	debug	status alarm pending for alias.0.WC.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:18:54.926	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:54.633	debug	status alarm pending for alias.0.Esszimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:18:54.632	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:44.909	debug	status alarm pending for alias.0.HWR.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:18:44.909	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:44.622	debug	status alarm pending for alias.0.Kueche.Rollo_Balkontür.SET: false
shuttercontrol.0
	2021-12-29 10:18:44.621	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:34.898	debug	status alarm pending for alias.0.Büro.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:18:34.898	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:34.613	debug	status alarm pending for alias.0.Kueche.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:18:34.613	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:32.898	debug	insidetemperature changed: alias.0.Kind_West.Temperatur.ACTUAL Value: 20.7
shuttercontrol.0
	2021-12-29 10:18:24.597	debug	status alarm pending for alias.0.WC.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:18:24.596	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:14.582	debug	status alarm pending for alias.0.HWR.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:18:14.581	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:04.537	debug	status alarm pending for alias.0.Büro.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:18:04.536	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:18:02.535	debug	insidetemperature changed: alias.0.Schlafzimmer.Temperatur.ACTUAL Value: 20.3
shuttercontrol.0
	2021-12-29 10:16:52.489	debug	status alarm pending for alias.0.Wohnzimmer.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:16:52.488	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:49.232	debug	status alarm pending for alias.0.Wohnzimmer.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:16:49.231	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:42.477	debug	status alarm pending for alias.0.Sauna.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:42.477	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:39.224	debug	status alarm pending for alias.0.Sauna.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:39.224	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:32.458	debug	status alarm pending for alias.0.Schlafzimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:32.457	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:29.213	debug	status alarm pending for alias.0.Schlafzimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:29.213	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:22.437	debug	status alarm pending for alias.0.Kind_Ost.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:22.436	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:19.194	debug	status alarm pending for alias.0.Kind_Ost.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:19.194	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:12.409	debug	status alarm pending for alias.0.Kind_West.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:12.408	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:09.187	debug	status alarm pending for alias.0.Kind_West.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:09.187	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:16:02.387	debug	status alarm pending for alias.0.Bad.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:16:02.387	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:59.096	debug	status alarm pending for alias.0.Bad.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:15:59.095	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:52.374	debug	status alarm pending for alias.0.Esszimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:15:52.373	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:49.090	debug	status alarm pending for alias.0.Esszimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:15:49.090	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:42.364	debug	status alarm pending for alias.0.Kueche.Rollo_Balkontür.SET: false
shuttercontrol.0
	2021-12-29 10:15:42.363	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:39.072	debug	status alarm pending for alias.0.Kueche.Rollo_Balkontür.SET: false
shuttercontrol.0
	2021-12-29 10:15:39.071	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:32.352	debug	status alarm pending for alias.0.Kueche.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:15:32.351	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:29.065	debug	status alarm pending for alias.0.Kueche.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:15:29.064	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:22.336	debug	status alarm pending for alias.0.WC.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:15:22.336	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:18.972	debug	status alarm pending for alias.0.WC.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:15:18.971	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:12.330	debug	status alarm pending for alias.0.HWR.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:15:12.330	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:08.965	debug	status alarm pending for alias.0.HWR.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:15:08.965	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:02.100	debug	status alarm pending for alias.0.Büro.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:15:02.099	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:15:00.041	debug	Sun Elevation: 11.7°
shuttercontrol.0
	2021-12-29 10:15:00.041	debug	Sun Azimut: 153.4°
shuttercontrol.0
	2021-12-29 10:15:00.040	debug	calculate astrodata ...
shuttercontrol.0
	2021-12-29 10:14:58.937	debug	status alarm pending for alias.0.Büro.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:14:58.937	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:14:56.935	debug	outsidetemperature changed: alias.0.Aussenbereich.Temperatur_Haustür.ACTUAL Value: 5.09
shuttercontrol.0
	2021-12-29 10:14:56.425	debug	Shutter Terrasse was moved manually to: 88% while window was open - prevent trigger from driving back
shuttercontrol.0
	2021-12-29 10:14:56.424	debug	save current height after State Check: 88% from Terrasse
shuttercontrol.0
	2021-12-29 10:13:56.415	debug	Terrasse Updated trigger action to Manu_Mode to prevent moving after window close
shuttercontrol.0
	2021-12-29 10:13:56.415	debug	Terrasse drived manually to 88. Old value = 98. New value = 88
shuttercontrol.0
	2021-12-29 10:13:16.280	debug	Shutter Buero was moved manually to: 74% while window was open - prevent trigger from driving back
shuttercontrol.0
	2021-12-29 10:13:16.280	debug	save current height after State Check: 74% from Buero
shuttercontrol.0
	2021-12-29 10:12:56.409	debug	Shutter state changed: Terrasse old value = 98 new value = 88
shuttercontrol.0
	2021-12-29 10:12:52.039	debug	status alarm pending for alias.0.Wohnzimmer.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:12:52.038	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:12:42.013	debug	status alarm pending for alias.0.Sauna.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:12:42.013	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:12:31.993	debug	status alarm pending for alias.0.Schlafzimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:12:31.992	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:12:21.973	debug	status alarm pending for alias.0.Kind_Ost.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:12:21.973	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:12:16.770	debug	Buero Updated trigger action to Manu_Mode to prevent moving after window close
shuttercontrol.0
	2021-12-29 10:12:16.769	debug	Buero drived manually to 74. Old value = 98. New value = 74
shuttercontrol.0
	2021-12-29 10:12:16.274	debug	Buero Updated trigger action to Manu_Mode to prevent moving after window close
shuttercontrol.0
	2021-12-29 10:12:16.274	debug	Buero drived manually to 74.5. Old value = 98. New value = 74.5
shuttercontrol.0
	2021-12-29 10:12:11.957	debug	status alarm pending for alias.0.Kind_West.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:12:11.957	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:12:01.941	debug	status alarm pending for alias.0.Bad.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:12:01.941	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:11:51.933	debug	status alarm pending for alias.0.Esszimmer.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:11:51.933	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:11:41.923	debug	status alarm pending for alias.0.Kueche.Rollo_Balkontür.SET: false
shuttercontrol.0
	2021-12-29 10:11:41.923	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:11:31.913	debug	status alarm pending for alias.0.Kueche.Rollo_Fenster.SET: false
shuttercontrol.0
	2021-12-29 10:11:31.912	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:11:21.897	debug	status alarm pending for alias.0.WC.Rollo.SET: false
shuttercontrol.0
	2021-12-29 10:11:21.896	debug	start pendingAlarm to check if an alarm is currently pending (exept frost)
shuttercontrol.0
	2021-12-29 10:11:16.759	debug	Shutter state changed: Buero old value = 98 new value = 74
shuttercontrol.0
	2021-12-29 10:11:16.267	debug	Shutter state changed: Buero old value = 98 new value = 74.5
shuttercontrol.0
	2021-12-29 10:11:11.881	debug	status alarm pending for alias.0.HWR.Rollo.SET: false

Verständlich was ich damit sagen möchte?

Dirk Peter

@nightfly1983
Hallo Nightfly, kommt dein Frostalarm - Signal ständig mit jeder Temperaturänderung. Dies könnte die Ursache sein, da mit jedem erneuten false - Signal die Rolläden wieder hoch fahren. Ich habe dies bei mir über ein kleines Skript abgefangen.
MfG Dirk Peter

simatec

@nightfly1983 Zeig mal bitte deinen Script für den Frostalarm

Nightfly1983

@dirk-peter Das könnte das Problem sein, habe es direkt mal abgeändert und mal sehen, ob es jetzt passt.

// Temp Balkon
on({id: "alias.0.Aussenbereich.Temperatur_Balkon.ACTUAL"/*ACTUAL*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  // Temp Balkon
  if (getState("alias.0.Aussenbereich.Temperatur_Balkon.ACTUAL").val < 5) {
    if (getState("javascript.0.Datenpunkte.Frost").val != true) {
      setState("javascript.0.Datenpunkte.Frost"/*Frost*/, true);
    }
  } else {
    if (getState("javascript.0.Datenpunkte.Frost").val != false) {
      setState("javascript.0.Datenpunkte.Frost"/*Frost*/, false);
    }
  }
});

simatec

@nightfly1983

Versuche es mal hiermit ... ist etwas sauberer :blush:

// Temp Balkon
on({ id: 'alias.0.Aussenbereich.Temperatur_Balkon.ACTUAL'/*ACTUAL*/, change: 'ne' }, async function (obj) {
    const stateFrost = await getStateAsync('javascript.0.Datenpunkte.Frost');

    // Temp Balkon
    if (obj.state.val < 5 && stateFrost.val === false) {
        await setStateAsync('javascript.0.Datenpunkte.Frost'/*Frost*/, true, true);
        console.log('Frostalarm für Shuttercontrol ist aktiv');
    } else if (obj.state.val >= 5 && stateFrost.val === true) {
        await setStateAsync('javascript.0.Datenpunkte.Frost'/*Frost*/, false, true);
        console.log('Frostalarm für Shuttercontrol ist nicht aktiv');
    }
});

MartyBr

@simatec
Sorry, der Adapter hatte die Automatik abgeschaltet. Ich habe die Rollos daher manuell heruntergefahren. Ich gebe dir Morgen die Rückmeldung.

Dirk Peter

@simatec
Hallo, alles i.O.
Screenshot 2021-12-29 165059.jpg
Danke, Dirk Peter

Community Forum

NEWS

Test Adapter shuttercontrol v2.0.x

Changelog

1.4.8 (2021-12-25)

Changelog

1.4.9 (2021-12-29)

Support us

912

32.4k

81.5k

1.3m