Blockly für Sonoff D1 Dimmer
-
schau ob deine Ghostswitches von einem reboot kommen.
Einfach mal beobachten in der Console.
Nach reboot startet der ja mit Dimmer on und den gleichen Dimmereinstellungen.Eventuell kannst du das mit einer Rule lösen, da bin ich aber nicht Fit drin.
Wenn reboot dann Power / Dimmer off.ON System#Boot DO ????? ENDON
-
schau ob deine Ghostswitches von einem reboot kommen.
Einfach mal beobachten in der Console.
Nach reboot startet der ja mit Dimmer on und den gleichen Dimmereinstellungen.Eventuell kannst du das mit einer Rule lösen, da bin ich aber nicht Fit drin.
Wenn reboot dann Power / Dimmer off.ON System#Boot DO ????? ENDON
-
schau ob deine Ghostswitches von einem reboot kommen.
Einfach mal beobachten in der Console.
Nach reboot startet der ja mit Dimmer on und den gleichen Dimmereinstellungen.Eventuell kannst du das mit einer Rule lösen, da bin ich aber nicht Fit drin.
Wenn reboot dann Power / Dimmer off.ON System#Boot DO ????? ENDON
-
@ralla66
Da brauchst keine Rule, sondern ne Setoption, wobei ich da auch erst m,al suchen müsste, welche das ist :)Ich hab nur ein Tuya Dimmer mit Tasmota laufen und der geistert nicht rum.
Die Rule hat auch nicht gebracht
00:00:00.001 HDW: ESP8285 00:00:00.050 CFG: aus Flash geladen von F4, Anzahl 24 00:00:00.056 QPC: Count 1 00:00:00.061 SER: Set to 8N1 9600 bit/s 00:00:00.113 Projekt tasmota - Dimmer-Flur Version 10.0.0(tasmota)-2_7_4_9(2021.10.19 08:23:57) 00:00:00.175 RUL: DIMMER#BOOT performs "backlog dimmer 3; dimmer 5; dimmer 8" 00:00:00.191 RSL: RESULT = {"POWER":"ON","Dimmer":3} 00:00:00.531 WIF: verbinden mit AP1 FRITZ!Box Channel 11 BSSId DC:39:6F:C1:D7:55 in Modus 11n als tasmota-2AA601-1537... 00:00:01.007 RSL: RESULT = {"POWER":"ON","Dimmer":5} 00:00:01.212 RSL: RESULT = {"POWER":"ON","Dimmer":8} 00:00:03.771 WIF: verbunden 00:00:04.025 HTP: Web-Server aktiv bei tasmota-2AA601-1537 mit IP-Adresse 10.10.5.25 11:51:16.019 MQT: Verbindungsversuch... 11:51:16.027 MQT: verbunden 11:51:16.030 MQT: tele/tasmota_2AA601/LWT = Online (beibehalten) 11:51:16.033 MQT: cmnd/tasmota_2AA601/POWER = 11:51:16.046 MQT: tele/tasmota_2AA601/INFO1 = {"Info1":{"Module":"Sonoff D1","Version":"10.0.0(tasmota)","FallbackTopic":"cmnd/Dimmer-Flur_fb/","GroupTopic":"cmnd/tasmotas/"}} 11:51:16.053 MQT: tele/tasmota_2AA601/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-2AA601-1537","IPAddress":"10.10.5.25"}} 11:51:16.057 MQT: tele/tasmota_2AA601/INFO3 = {"Info3":{"RestartReason":"Software/System restart"}} 11:51:16.060 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON"} 11:51:16.064 MQT: stat/tasmota_2AA601/POWER = ON 11:51:17.458 QPC: Reset 11:51:20.413 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T11:51:20","Uptime":"0T00:00:11","UptimeSec":11,"Heap":28,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":69,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:05"}} 11:52:33.280 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":100} -
Die Rule hat auch nicht gebracht
00:00:00.001 HDW: ESP8285 00:00:00.050 CFG: aus Flash geladen von F4, Anzahl 24 00:00:00.056 QPC: Count 1 00:00:00.061 SER: Set to 8N1 9600 bit/s 00:00:00.113 Projekt tasmota - Dimmer-Flur Version 10.0.0(tasmota)-2_7_4_9(2021.10.19 08:23:57) 00:00:00.175 RUL: DIMMER#BOOT performs "backlog dimmer 3; dimmer 5; dimmer 8" 00:00:00.191 RSL: RESULT = {"POWER":"ON","Dimmer":3} 00:00:00.531 WIF: verbinden mit AP1 FRITZ!Box Channel 11 BSSId DC:39:6F:C1:D7:55 in Modus 11n als tasmota-2AA601-1537... 00:00:01.007 RSL: RESULT = {"POWER":"ON","Dimmer":5} 00:00:01.212 RSL: RESULT = {"POWER":"ON","Dimmer":8} 00:00:03.771 WIF: verbunden 00:00:04.025 HTP: Web-Server aktiv bei tasmota-2AA601-1537 mit IP-Adresse 10.10.5.25 11:51:16.019 MQT: Verbindungsversuch... 11:51:16.027 MQT: verbunden 11:51:16.030 MQT: tele/tasmota_2AA601/LWT = Online (beibehalten) 11:51:16.033 MQT: cmnd/tasmota_2AA601/POWER = 11:51:16.046 MQT: tele/tasmota_2AA601/INFO1 = {"Info1":{"Module":"Sonoff D1","Version":"10.0.0(tasmota)","FallbackTopic":"cmnd/Dimmer-Flur_fb/","GroupTopic":"cmnd/tasmotas/"}} 11:51:16.053 MQT: tele/tasmota_2AA601/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-2AA601-1537","IPAddress":"10.10.5.25"}} 11:51:16.057 MQT: tele/tasmota_2AA601/INFO3 = {"Info3":{"RestartReason":"Software/System restart"}} 11:51:16.060 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON"} 11:51:16.064 MQT: stat/tasmota_2AA601/POWER = ON 11:51:17.458 QPC: Reset 11:51:20.413 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T11:51:20","Uptime":"0T00:00:11","UptimeSec":11,"Heap":28,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":69,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:05"}} 11:52:33.280 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":100} -
@plato
{"POWER":"ON","Dimmer":100} :-)
Falsche Rule
wenn dann on Dimmer#Boot do dimmer 0 endon -
@ralla66
Da brauchst keine Rule, sondern ne Setoption, wobei ich da auch erst m,al suchen müsste, welche das ist :)Ich hab nur ein Tuya Dimmer mit Tasmota laufen und der geistert nicht rum.
@jan1 Jetzt hat er innerhalb weniger Sekunden mehrmals geschaltet
12:07:43.020 MQT: verbunden 12:07:43.023 MQT: tele/tasmota_2AA601/LWT = Online (beibehalten) 12:07:43.026 MQT: cmnd/tasmota_2AA601/POWER = 12:07:43.039 MQT: tele/tasmota_2AA601/INFO1 = {"Info1":{"Module":"Sonoff D1","Version":"10.0.0(tasmota)","FallbackTopic":"cmnd/Dimmer-Flur_fb/","GroupTopic":"cmnd/tasmotas/"}} 12:07:43.045 MQT: tele/tasmota_2AA601/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-2AA601-1537","IPAddress":"10.10.5.25"}} 12:07:43.049 MQT: tele/tasmota_2AA601/INFO3 = {"Info3":{"RestartReason":"Software/System restart"}} 12:07:43.052 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON"} 12:07:43.054 MQT: stat/tasmota_2AA601/POWER = ON 12:07:43.065 RUL: SYSTEM#BOOT performs "backlog Power1 1; Dimmer 8" 12:07:43.072 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON"} 12:07:43.073 MQT: stat/tasmota_2AA601/POWER = ON 12:07:43.276 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":8} 12:07:44.471 QPC: Reset 12:07:47.421 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:07:47","Uptime":"0T00:00:11","UptimeSec":11,"Heap":28,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":84,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:12:47.423 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:12:47","Uptime":"0T00:05:11","UptimeSec":311,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:17:47.422 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:17:47","Uptime":"0T00:10:11","UptimeSec":611,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-42,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:22:47.428 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:22:47","Uptime":"0T00:15:11","UptimeSec":911,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:27:47.417 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:27:47","Uptime":"0T00:20:11","UptimeSec":1211,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:32:47.422 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:32:47","Uptime":"0T00:25:11","UptimeSec":1511,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:35:24.343 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":100} 12:35:52.826 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":40} 12:37:47.415 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:37:47","Uptime":"0T00:30:11","UptimeSec":1811,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":40,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:38:21.105 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":100} -
@jan1 Jetzt hat er innerhalb weniger Sekunden mehrmals geschaltet
12:07:43.020 MQT: verbunden 12:07:43.023 MQT: tele/tasmota_2AA601/LWT = Online (beibehalten) 12:07:43.026 MQT: cmnd/tasmota_2AA601/POWER = 12:07:43.039 MQT: tele/tasmota_2AA601/INFO1 = {"Info1":{"Module":"Sonoff D1","Version":"10.0.0(tasmota)","FallbackTopic":"cmnd/Dimmer-Flur_fb/","GroupTopic":"cmnd/tasmotas/"}} 12:07:43.045 MQT: tele/tasmota_2AA601/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-2AA601-1537","IPAddress":"10.10.5.25"}} 12:07:43.049 MQT: tele/tasmota_2AA601/INFO3 = {"Info3":{"RestartReason":"Software/System restart"}} 12:07:43.052 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON"} 12:07:43.054 MQT: stat/tasmota_2AA601/POWER = ON 12:07:43.065 RUL: SYSTEM#BOOT performs "backlog Power1 1; Dimmer 8" 12:07:43.072 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON"} 12:07:43.073 MQT: stat/tasmota_2AA601/POWER = ON 12:07:43.276 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":8} 12:07:44.471 QPC: Reset 12:07:47.421 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:07:47","Uptime":"0T00:00:11","UptimeSec":11,"Heap":28,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":84,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:12:47.423 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:12:47","Uptime":"0T00:05:11","UptimeSec":311,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:17:47.422 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:17:47","Uptime":"0T00:10:11","UptimeSec":611,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-42,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:22:47.428 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:22:47","Uptime":"0T00:15:11","UptimeSec":911,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:27:47.417 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:27:47","Uptime":"0T00:20:11","UptimeSec":1211,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:32:47.422 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:32:47","Uptime":"0T00:25:11","UptimeSec":1511,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":8,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:35:24.343 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":100} 12:35:52.826 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":40} 12:37:47.415 MQT: tele/tasmota_2AA601/STATE = {"Time":"2021-10-30T12:37:47","Uptime":"0T00:30:11","UptimeSec":1811,"Heap":26,"SleepMode":"Dynamic","Sleep":10,"LoadAvg":99,"MqttCount":1,"POWER":"ON","Dimmer":40,"Fade":"OFF","Speed":1,"LedTable":"ON","Wifi":{"AP":1,"SSId":"FRITZ!Box Boos","BSSId":"DC:39:6F:C1:D7:55","Channel":11,"Mode":"11n","RSSI":100,"Signal":-43,"LinkCount":1,"Downtime":"0T00:00:05"}} 12:38:21.105 MQT: stat/tasmota_2AA601/RESULT = {"POWER":"ON","Dimmer":100} -
@plato
Hm, könnest mal ein Issues auf Github bei Tasmota öffnen. Vielleicht weiß einer was, oder ist speziell beim Sonoff ein Bug. -
@plato
Kein Plan, da ich die Ursache nicht kenne und man dann drum rum basteln muss, wobei ich eben lieber nach der Ursache forschen würde, weil sinnvoller ;)Alternativ kannst auch mal im CerationX Form fragen, da dort viel mit Tasmota gemacht wird und einige Spezis unterwegs sind.
-
@ralla66
Da brauchst keine Rule, sondern ne Setoption, wobei ich da auch erst m,al suchen müsste, welche das ist :)Ich hab nur ein Tuya Dimmer mit Tasmota laufen und der geistert nicht rum.
-
@jan1 sagte in Blockly für Sonoff D1 Dimmer:
Ich hab nur ein Tuya Dimmer mit Tasmota laufen und der geistert nicht rum.
Moin, ich habe eine Issue auf Github eröffnet.
Was hast du denn für einen Tuya Dimmer im Einsatz einen AP oder UP ?
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
537
Online32.8k
Benutzer82.8k
Themen1.3m
Beiträge