Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[matze-dev]

@wolfgangfb said in Adapter WM-Bus / Kampstrup Multical 21:

Warning! Desired link modes none cannot be set for device /dev/ttyUSB0:im871a[00100776]

Dieses Warning ist komisch!? Ich habe bei mir die Datagramme im T1-Mode.
Dann müsste in der /etc/wmbusmeters.conf
die Zeile so stehen:
device=/dev/ttyUSB0:im871a:t1
ggfs. kann man hinten das :t1 weglassen - müsste man versuchen.

Dann ist noch wichtig, den AES-Key hier zu hinterlegen:
/etc/wmbusmeters.d/MyTapWater
key=xxxxxxxxxxxxxxxxxxx

Viel Glück

[WolfgangFB]

@matze-dev
Die Warning ist jetzt zumindest weg, mal sehn ob innerhalb der nächsten Stunde was ankommt.

(wmbusmeters) shutting down
(wmbusmeters) logging started 2021-07-14 16:46:20 using _
[2021-07-14_16:46:20] Started config im871a[00100776] on /dev/ttyUSB0 listening on t1
(wmbusmeters) waiting for telegrams
[2021-07-14_16:46:22] (memory) rss 1953792 peak 1.86 MiB
pi@raspberrypi4:/var/log/wmbusmeters $

[matze-dev]

@wolfgangfb einfach die Daten mitlesen
tail -f /var/log/wmbusmeters/wmbusmeters.log

Viel Glück

[WolfgangFB]

@matze-dev

da kommt nichts

pi@raspberrypi4:/var/log/wmbusmeters $  tail -f /var/log/wmbusmeters/wmbusmeters.log
[2021-07-14_16:13:00] (wmbus) successfully reset wmbus device
(wmbusmeters) shutting down
(wmbusmeters) logging started 2021-07-14 16:46:20 using _
[2021-07-14_16:46:20] Started config im871a[00100776] on /dev/ttyUSB0 listening on t1
(wmbusmeters) waiting for telegrams
[2021-07-14_16:46:22] (memory) rss 1953792 peak 1.86 MiB
[2021-07-14_17:46:20] [ALARM DeviceInactivity] 3600 seconds of inactivity resetting /dev/ttyUSB0 im871a (timeout 3600s expected mon-sun(00-23) now 2021-07-14 17:46)
[2021-07-14_17:46:20] (shell) /bin/sh exited with non-zero return code: 127
[2021-07-14_17:46:20] (wmbus) resetting /dev/ttyUSB0
[2021-07-14_17:46:23] (wmbus) successfully reset wmbus device

[matze-dev]

@wolfgangfb ja, da scheint nichts anzukommen. Ausserdem macht er ein Reset. Das ist ungewöhnlich.
Was sagt denn
journalctl -f
dmesg?

[WolfgangFB]

@matze-dev

pi@raspberrypi4:/var/log/wmbusmeters $   journalctl -f
-- Logs begin at Thu 2019-02-14 11:11:59 CET. --
Jul 14 19:48:06 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:06 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:07 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:07 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:08 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:09 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:10 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:10 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:10 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:12 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:12 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:13 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:13 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:14 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:15 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:16 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:17 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:17 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:18 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:18 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:18 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:19 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)
Jul 14 19:48:19 raspberrypi4 kernel: Bluetooth: hci0: Frame reassembly failed (-84)

demesg
[204619.514651] Bluetooth: hci0: Frame reassembly failed (-84)
[204620.459730] Bluetooth: hci0: Frame reassembly failed (-84)
[204620.930504] Bluetooth: hci0: Frame reassembly failed (-84)
[204620.953443] Bluetooth: hci0: Frame reassembly failed (-84)
[204621.105377] Bluetooth: hci0: Frame reassembly failed (-84)
[204622.176851] Bluetooth: hci0: Frame reassembly failed (-84)
[204622.275958] Bluetooth: hci0: Frame reassembly failed (-84)
[204622.470953] Bluetooth: hci0: Frame reassembly failed (-84)
[204622.830382] Bluetooth: hci0: Frame reassembly failed (-84)
[204623.600358] Bluetooth: hci0: Frame reassembly failed (-84)
[204624.175987] Bluetooth: hci0: Frame reassembly failed (-84)
[204625.402258] Bluetooth: hci0: Frame reassembly failed (-84)
[204627.417943] Bluetooth: hci0: Frame reassembly failed (-84)

[matze-dev]

@wolfgangfb würde vorschlagen, den Stick einmal ziehen und dann wieder stecken. Dabei dmesg laufen lassen. Was erzeugt er für Meldungen?

[WolfgangFB]

@matze-dev

[208168.253155] usb 1-1.1: USB disconnect, device number 3
[208168.253617] cp210x ttyUSB0: failed set request 0x12 status: -19
[208168.253640] cp210x ttyUSB0: failed set request 0x0 status: -19
[208168.254215] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[208168.254736] cp210x 1-1.1:1.0: device disconnected
[208168.408590] Bluetooth: hci0: Frame reassembly failed (-84)
[208168.426653] Bluetooth: hci0: Frame reassembly failed (-84)
[208169.204104] Bluetooth: hci0: Frame reassembly failed (-84)
[208170.015942] Bluetooth: hci0: Frame reassembly failed (-84)
[208170.212190] Bluetooth: hci0: Frame reassembly failed (-84)
[208170.281565] Bluetooth: hci0: Frame reassembly failed (-84)
[208170.603152] usb 1-1.1: new full-speed USB device number 7 using xhci_hcd
[208170.612186] Bluetooth: hci0: Frame reassembly failed (-84)
[208170.741010] usb 1-1.1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[208170.741028] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[208170.741041] usb 1-1.1: Product: WiMOD iM871A-usb
[208170.741053] usb 1-1.1: Manufacturer: Silicon Labs
[208170.741065] usb 1-1.1: SerialNumber: 00919907
[208170.747222] cp210x 1-1.1:1.0: cp210x converter detected
[208170.755693] usb 1-1.1: cp210x converter now attached to ttyUSB0
[

[2021-07-14_20:48:38] Lost /dev/ttyUSB0 closing im871a[00100776]
No wmbus device detected, waiting for a device to be plugged in.
[2021-07-14_20:48:38] [ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not working
[2021-07-14_20:48:38] (shell) /bin/sh exited with non-zero return code: 127
[2021-07-14_20:48:40] Started config im871a[00100776] on /dev/ttyUSB0 listening on t1
(wmbusmeters) shutting down
(wmbusmeters) logging started 2021-07-14 20:50:06 using _
[2021-07-14_20:50:06] Started config im871a[00100776] on /dev/ttyUSB0 listening on t1
(wmbusmeters) waiting for telegrams
[2021-07-14_20:50:08] (memory) rss 1929216 peak 1.83 MiB

[matze-dev]

@wolfgangfb bei mir sieht dmesg so aus:

und beim journalctl:

[WolfgangFB]

@matze-dev

Ich habe jetzt nochmal eine jungfräuliche SD Karte genommen, ein neues Image installiert

pi@raspberrypi:~ $ lsb_release -a
No LSB modules are available.
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster

mosqutto installiert

sudo apt-get install mosquitto

pi@raspberrypi:~ $ apt policy mosquitto
mosquitto:
  Installiert:           1.5.7-1+deb10u1
  Installationskandidat: 1.5.7-1+deb10u1
  Versionstabelle:
 *** 1.5.7-1+deb10u1 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages
        100 /var/lib/dpkg/status

und den wmbusmeters aus den Quellen installiert

pi@raspberrypi:~ $ more /etc/wmbusmeters.conf
loglevel=debug
device=/dev/ttyUSB0:im871a:t1
logtelegrams=true
format=json
meterfiles=/var/log/wmbusmeters/meter_readings
meterfilesaction=append
meterfilesnaming=name
meterfilestimestamp=day
logfile=/var/log/wmbusmeters/wmbusmeters.log
shell=/usr/local/bin/mosquitto_pub -d -h localhost -t wmbusmeters/$METER_ID -m "$METER_JSON"
alarmshell=/usr/local/bin/mosquitto_pub -d -h localhost -t wmbusmeters_alarm -m "$ALARM_TYPE $ALARM_MESSAGE"
alarmtimeout=1h
alarmexpectedactivity=mon-sun(00-23)

pi@raspberrypi:~ $ more /etc/wmbusmeters.d/MyTapWater
name=MyTapWater
type=multical21
id=57813696
key=E4E7EAF6FD17EAFB9587BC2996783C63

pi@raspberrypi:~ $ sudo systemctl status wmbusmeters
● wmbusmeters.service - "wmbusmeters service"
   Loaded: loaded (/lib/systemd/system/wmbusmeters.service; disabled; vendor preset: enabled)
   Active: active (running) since Sat 2021-07-17 16:14:49 CEST; 9min ago
     Docs: https://github.com/weetmuts/wmbusmeters
           man:wmbusmeters(1)
  Process: 2774 ExecStartPre=/bin/mkdir -p /var/log/wmbusmeters/meter_readings (code=exited, status=0/SUCCESS)
  Process: 2775 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /var/log/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 2776 ExecStartPre=/bin/mkdir -p /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 2777 ExecStartPre=/bin/chown -R wmbusmeters:wmbusmeters /run/wmbusmeters (code=exited, status=0/SUCCESS)
  Process: 2778 ExecStart=/usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid (code=exited, status=0/SUCCESS)
 Main PID: 2779 (wmbusmetersd)
    Tasks: 3 (limit: 4915)
   CGroup: /system.slice/wmbusmeters.service
           └─2779 /usr/sbin/wmbusmetersd /run/wmbusmeters/wmbusmeters.pid

Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) "alarmshell" "/usr/local/bin/mosquitto_pub -d -h localhost -t w
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) "alarmtimeout" "1h"
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) "alarmexpectedactivity" "mon-sun(00-23)"
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) "" ""
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) loading meter file /etc/wmbusmeters.d/MyTapWater
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) name=MyTapWater
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) type=multical21
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) id=57813696
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (config) key=<notprinted>
Jul 17 16:14:49 raspberrypi wmbusmetersd[2779]: (wmbusmeters) using log file /var/log/wmbusmeters/wmbusmeters.log
pi@raspberrypi:~ $                                                                                   

pi@raspberrypi:~ $ more /var/log/wmbusmeters/wmbusmeters.log
(serial) stopping manager
(serial) EVENT thread interrupted
(serial) event loop stopped!
(serial) TIMER thread interrupted
(wmbusmeters) shutting down
(wmbusmeters) logging started 2021-07-17 16:31:43 using _
(wmbusmeters) version: _
(config) store meter files in: "/var/log/wmbusmeters/meter_readings"
(config) using device: /dev/ttyUSB0:im871a:t1
(config) number of meters: 1
[2021-07-17_16:31:43] [ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not working
(shell) exec "/bin/sh"
(shell) arg "-c"
(shell) arg "/usr/local/bin/mosquitto_pub -d -h localhost -t wmbusmeters_alarm -m "$ALARM_TYPE $ALARM_MESSAGE""
(shell) env "ALARM_TYPE=SpecifiedDeviceNotFound"
(shell) env "ALARM_MESSAGE=[ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not working"
(shell) waiting for child 7033 to complete.
(shell) /bin/sh: return code 127
[2021-07-17_16:31:44] (shell) /bin/sh exited with non-zero return code: 127
(serial) EVENT thread interrupted
No wmbus device detected, waiting for a device to be plugged in.
(shell) exec (capture output) "/bin/pidof"
(shell) arg "wmbusmetersd"
(shell) output: >>>7030
<<<
(serial) EVENT thread interrupted
(shell) return code 0
(shell) 7035 exited
(shell) exec (capture output) "/bin/pidof"
(shell) arg "wmbusmeters"
(shell) output: >>>652
<<<
(serial) EVENT thread interrupted
(shell) return code 0
(shell) 7036 exited
Notice! Other wmbusmeters (pid 652) is running and it might hog any wmbus devices.
(serial) registered regular callback HOT_PLUG_DETECTOR(0) every 2 seconds
(wmbusmeters) waiting for telegrams
(serial) waiting for stop
(serial) EVENT thread interrupted
(serial) TIMER thread interrupted
[2021-07-17_16:31:46] (memory) rss 2818048 peak 2.68 MiB
pi@raspberrypi:~ $

Hier sieht es für mich so aus, als ob der USB Stick nicht erkannt wird. Muss man da evtl. einen Treiber installieren?

pi@raspberrypi:~ $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP2102/CP2109 UART Bridge Controller [CP210x family]
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
pi@raspberrypi:~ $ ls -l /dev/serial/by-id
insgesamt 0
lrwxrwxrwx 1 root root 13 Jul 17 16:06 usb-Silicon_Labs_WiMOD_iM871A-usb_00919907-if00-port0 -> ../../ttyUSB0
pi@raspberrypi:~ $

[matze-dev]

@wolfgangfb hallo, gibt's die Datei /etc/wmbusmeters.d/MyTapWater, wie oben beschrieben?

[WolfgangFB]

@matze-dev

Ja, habe ich ja mit

 more /etc/wmbusmeters.d/MyTapWater

angezeigt, dann muss es sie ja auch geben.
Darin sehe ich aber nichts was mir die Meldung im wmbusmeters.log (DeviceNotFound) erklären würde.

Wie sieht den Dein wmbusmeters.log aus?

[matze-dev]

@wolfgangfb sind da auch der Key drin und die Zähler ID?

[matze-dev]

@matze-dev
Das muss in der MyTapWater stehen

name=MyTapWater
type=multical21
id=##der Name/ID des Zaehlers ##
key=##hier den Key eintragen - kommt aus der zugeschickten XML-Datei des Wasserversorgers##

[WolfgangFB]

@matze-dev

Ja, habe ich doch in meinem Beitrag alles gequoted (incl. Key weil ich nicht denke, dass damit irgend jemand etwas anfangen kann). Fünfter Codeblock.

[matze-dev]

@wolfgangfb ok, habe es gesehen.

[WolfgangFB]

@matze-dev

Ich denke das Entscheidende ist die Zeile

[2021-07-17_16:31:43] [ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not working

aus

 more /var/log/wmbusmeters/wmbusmeters.log

Codeblock 7

[matze-dev]

@wolfgangfb ja, das hätte ich auch als nächstes angemerkt.

[WolfgangFB]

@matze-dev
Muss man da irgendeinen Treiber installieren?

[matze-dev]

@wolfgangfb nein, das macht der wmbusmeters. D.h. der ist der Treiber für das Device.