[erl]Homematic Adapter
-
@homoran Hi Danke,
@homoran said in Homematic Adapter:
Textstelle markieren
ok klappt,
anbei nochmals eine Zusammenfassung der Fehler über mehrere Tage, werde jetzt auch die Adapter und die entsprechenden Blockly Bereich prüfen.
Diese Fehlermeldungen rühren verm. von der Einrichtung Alias
Gruß
Axel2021-03-20 20:00:07.964 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.966 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.968 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.971 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.973 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.974 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.976 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.977 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.979 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.980 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.982 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.983 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:07.985 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99164E9.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.168 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.169 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.171 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.ERROR_UNDERVOLTAGE_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.172 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.184 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.186 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.188 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.191 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.193 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.195 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.217 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.219 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.221 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.224 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.226 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.228 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.230 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.232 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.233 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions 2021-03-20 20:00:08.236 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000DBE99AE85C.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions -
@afi sagte in Homematic Adapter:
Diese Fehlermeldungen rühren verm. von der Einrichtung Alias
da ist jetzt aber der dritte Homematic-Adapter involviert:
@afi sagte in Homematic Adapter:
hm-rega.0 (31752)
die dortige "Fehlermeldung" ist für den Entwickler.
@afi sagte in Homematic Adapter:has no existing object, this might lead to an error in future versions
Welche Version nutzst du da?
-
Hi und hier der Rest aus mehreren Tagen
2021-03-27 10:30:46.400 error (2633) Cannot call setValue: XML-RPC fault: Failure 2021-03-27 10:30:46.398 error (2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL 2021-03-26 06:48:14.831 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 06:48:14.838 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 06:48:32.100 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 06:48:32.100 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 06:48:47.017 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 06:48:47.017 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-26 06:50:43.386 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 06:50:43.387 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 06:51:07.405 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 06:51:07.405 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-26 07:00:00.022 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 started with pid 8879 2021-03-26 07:00:00.403 - info: coronavirus-statistics.0 (8879) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system 2021-03-26 07:00:00.407 - info: coronavirus-statistics.0 (8879) starting. Version 0.6.3 in /opt/iobroker/node_modules/iobroker.coronavirus-statistics, node: v12.21.0, js-controller: 3.2.16 2021-03-26 07:00:06.311 - info: coronavirus-statistics.0 (8879) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2021-03-26 07:00:06.825 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2021-03-26 07:08:18.494 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 07:08:18.495 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 07:08:34.706 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 07:08:34.706 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 07:08:49.606 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 07:08:49.607 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-26 07:15:12.020 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1852853:1","LEVEL",1] FLOAT 2021-03-26 07:15:12.025 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure 2021-03-26 07:15:16.021 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1856555:1","LEVEL",1] FLOAT 2021-03-26 07:15:16.022 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure 2021-03-26 08:55:13.903 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 08:55:13.903 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 08:55:38.341 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 08:55:38.342 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 08:55:53.102 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 0:55:53.102 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-26 09:00:10.813 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-26 09:00:10.813 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-26 12:16:55.020 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 12:16:55.024 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 12:17:10.931 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 12:17:10.931 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 12:17:25.837 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 12:17:25.838 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-26 12:17:30.609 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 12:17:30.609 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-26 12:18:08.544 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 12:18:08.544 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 12:18:23.450 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 12:18:23.450 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-26 13:37:33.769 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 13:37:33.769 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 13:37:50.278 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 13:37:50.279 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 13:38:05.191 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 13:38:05.191 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-26 13:40:27.520 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 13:40:27.520 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 13:40:52.065 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-26 13:40:52.065 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-26 13:41:06.980 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-26 13:41:06.980 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-26 18:19:13.448 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL 2021-03-26 18:19:13.451 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure 2021-03-26 18:30:00.017 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 started with pid 14158 2021-03-26 18:57:24.993 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1856674:1","LEVEL",0.08] FLOAT 2021-03-26 18:57:24.993 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure 2021-03-26 20:00:04.035 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT 2021-03-26 20:00:04.036 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure 2021-03-26 20:00:10.697 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-26 20:00:10.701 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-25 19:18:08.289 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL 2021-03-25 19:18:08.292 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-25 20:00:02.899 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT 2021-03-25 20:00:02.902 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure 2021-03-25 20:00:06.887 - info: coronavirus-statistics.0 (4295) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2021-03-25 20:00:10.573 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-25 20:00:10.573 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-25 21:57:04.379 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL 2021-03-25 21:57:04.382 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure 2021-03-24 07:20:23.551 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-24 07:20:23.571 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 07:20:40.317 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 07:20:40.318 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 07:20:55.209 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-24 07:20:55.210 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-24 07:21:14.282 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-24 07:21:14.282 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 07:21:38.209 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 07:21:38.209 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 07:21:53.141 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-24 07:21:53.142 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-24 09:00:10.548 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-24 09:00:10.549 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-24 09:15:07.931 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL 2021-03-24 09:15:07.936 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-24 09:17:58.678 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL 2021-03-24 09:17:58.678 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-24 19:25:27.034 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:25:27.038 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 19:25:44.859 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:25:44.859 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 19:25:59.712 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:25:59.712 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-24 19:29:10.207 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:29:10.207 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 19:29:34.440 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:29:34.440 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 19:29:49.327 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:29:49.327 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-24 19:48:44.850 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:48:44.850 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 19:49:01.508 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:49:01.509 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 19:49:16.416 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:49:16.417 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-24 19:49:31.526 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:49:31.527 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 19:49:46.535 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:49:46.536 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-24 19:49:58.800 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-24 19:49:58.800 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-24 19:49:59.259 - error: hm-rpc.2 (16673) Ping error [NUCioBroker:hm-rpc.2]: Unexpected end Line: 0 Column: 0 Char: 2021-03-24 19:49:59.259 - info: hm-rpc.2 (16673) Disconnected 2021-03-24 19:50:01.551 - info: hm-rpc.2 (16673) Connected 2021-03-24 20:00:03.107 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT 2021-03-24 20:00:03.111 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-24 20:00:10.769 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-24 20:00:10.769 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-24 21:24:57.560 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL 2021-03-24 21:24:57.563 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-23 07:01:19.297 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-23 07:01:19.303 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-23 07:01:36.224 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-23 07:01:36.224 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-23 07:01:51.114 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-23 07:01:51.114 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-23 07:02:32.721 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-23 07:02:32.721 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-23 07:02:56.359 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-23 07:02:56.359 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-23 07:03:11.268 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-23 07:03:11.269 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-23 09:00:10.748 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-23 09:00:10.749 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-23 16:50:18.567 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-23 16:50:18.570 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-23 16:50:34.794 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-23 16:50:34.794 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-23 16:50:49.696 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-23 16:50:49.696 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-23 16:51:32.444 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-23 16:51:32.444 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-23 16:51:43.515 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-23 16:51:43.516 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-23 16:51:45.854 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["QEQ0314259:2","STATE",false] BOOL 2021-03-23 16:51:45.861 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-23 16:51:58.550 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-23 16:51:58.551 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-23 18:49:36.019 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1853114:1","LEVEL",0.04] FLOAT 2021-03-23 18:49:36.023 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-23 20:00:02.965 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT 2021-03-23 20:00:02.968 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-23 20:00:10.623 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-23 20:00:10.626 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-22 06:19:17.397 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["LTK0090711:4","SET_TEMPERATURE",18] FLOAT 2021-03-22 06:19:17.403 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-22 07:23:00.499 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:23:00.504 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-22 07:23:30.326 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:23:30.326 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 07:23:45.234 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:23:45.234 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-22 07:25:46.356 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:25:46.356 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 07:26:11.542 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:26:11.542 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 07:26:26.451 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:26:26.451 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-22 07:44:24.279 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:44:24.280 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 07:44:40.191 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:44:40.192 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 07:44:55.008 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:44:55.009 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-22 07:45:25.283 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:45:25.283 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 07:45:49.401 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:45:49.401 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 07:46:04.308 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 07:46:04.308 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-22 09:00:10.620 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-22 09:00:10.621 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-22 16:26:46.998 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 16:26:47.001 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) 2021-03-22 16:27:16.379 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-22 16:27:16.380 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 16:27:31.291 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 16:27:31.292 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-22 16:28:24.240 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 16:28:24.240 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 16:28:48.800 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM 2021-03-22 16:28:48.800 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT) 2021-03-22 16:29:03.716 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM 2021-03-22 16:29:03.716 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end Line: 0 Column: 0 Char: 2021-03-22 20:00:02.825 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT 2021-03-22 20:00:02.828 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure 2021-03-22 20:00:10.476 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT 2021-03-22 20:00:10.479 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH) -
@homoran Hi Homoran, anbei die Versionen.
HomeMatic ReGaHSS Verbindet die Logikschicht einer HomeMatic CCU ("ReGaHSS") mit ioBroker homematic eq3 regahss ccu1 ccu2 1 3.0.16 HomeMatic RPC Verbindet HomeMatic Interface-Prozesse (BidCos-Services, Homegear und CUxD) via XML-RPC oder BIN-RPC mit ioBroker homematic bidcos eq3 ELV CCU CCU1 CCU2 rpc xmlrpc homegear binrpc CUxD FS20 FHT HMS EnOcean 2 1.14.35Gruß Axel
-
@afi sagte in Homematic Adapter:
2021-03-26 06:48:14.838 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
Ich weiß nicht ob das die vergleichbare Meldung ist, die ich auch hin und wieder habe, wenn der Empfänger von der CCU vorübergehend nicht erreichbar ist
Ich habe da so einen Kandidaten, der unter der Garage in der Werkstatt sit, zu dem es eine schlechte Funkverbindung gibt
Das hier kommt mir hingegen seltsam vor:
@afi sagte in Homematic Adapter:2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0
Column: 0
Char: -
@afi sagte in Homematic Adapter:
anbei die Versionen.
das ist aber seltsam.
die Meldung
@afi sagte in Homematic Adapter:has no existing object
sollte bereits mit der 3.0.15 gefixt sein
das entsprechende Issue wurde von @foxriver76 geschlossen
https://github.com/ioBroker/ioBroker.hm-rega/commit/a815e8ead2c88b8626b03845b2f664aed3b3e1f8auch die hm-rpc-Version ist aktuell
-
@homoran Hi,
hier mal die erste Analyse für die Garagentore"Enum", keine Bestätigung des Door Command.
00241A49A768DE LinkesGaragentor device 0 channel LinkesGaragentor:0 channel 1 channel LinkesGaragentor:1 channel Garage ${funcLock} DOOR_COMMAND state LinkesGaragentor:1.DOOR_COMMAND state Garage ${funcLock} NOP(0) DOOR_STATE state LinkesGaragentor:1.DOOR_STATE state Garage ${funcLock} CLOSED(0) ERROR_CODE state LinkesGaragentor:1.ERROR_CODE state value Garage ${funcLock} 0 PROCESS state LinkesGaragentor:1.PROCESS state Garage ${funcLock} STABLE(0) SECTION state LinkesGaragentor:1.SECTION state Garage ${funcLock} 0 SECTION_STATUS state LinkesGaragentor:1.SECTION_STATUS state Garage ${funcLock} NORMAL(0)Gruß Axel
-
@afi sagte in Homematic Adapter:
hier mal die erste Analyse für die Garagentore"Enum", keine Bestätigung des Door Command.
was willst du mir damit sagen?
Was ist das für eine Liste? -
@homoran Hi, dann mal wieder als screenshot
Eigentlich, dass der Door Command keine Rückmeldung hat und somit vermutlich alles ein Kommunikationsproblem ist. Ich gebe zu, vermutlich alles wilde Vermutungen aber ich suche noch den
Ansatz.Gruß Axel
-
@afi sagte in Homematic Adapter:
Eigentlich, dass der Door Command keine Rückmeldung hat und somit vermutlich alles ein Kommunikationsproblem ist.
was ist das für ein Gerät?
was ist door_command?was ist mit deinen Funktionen?
da sollte etwas in Klartext stehen - nicht als Variable ${funcLock}vielleicht einfach mal Geräte neu einlesen
Was syncst du denn alles laut HM-Rega?
-
@homoran said in Homematic Adapter:
was ist das für ein Gerät?
HmIP-MOD-HO
@homoran said in Homematic Adapter:
was ist door_command?
Es ist sowohl eine Status Meldung als auch eine Befehlsebene, s. Blockly, Blockly wurde in dieser Zeit nie
ausgeführt, meistens wird Original Handsender verwendet, somit nur Stutus Meldungen.
@homoran said in Homematic Adapter:
Was syncst du denn alles laut HM-Rega?
Hoffentlich sind ab und zu Screenshots ok.
Gruß Axel
-
@homoran Hi, habe da noch eine offene Baustelle, die damit zutun haben könnte. Alle iP Geräte blinken nach Aktion mehrmals orange und am Schluss einmal rot, hoffe Homematic versucht einen nicht von der CCU auf die Cloud Ebene zu locken. Habe im Netz die Problematik gefunden aber keine Lösung.
Gruß Axel -
@afi sagte in Homematic Adapter:
Hoffentlich sind ab und zu Screenshots ok.
an den richtigen Stellen immer!
@afi sagte in Homematic Adapter:
Alle iP Geräte blinken nach Aktion mehrmals orange und am Schluss einmal rot,
dann liegt dein Problem auf der CCU
Das bedeutet, dass das Emgfangsgerät den Befehl nicht erhalten hatAuch das mit den chiffrierten Aufzählungsnamen ist ein problem der CCU
Ich weiß nur die Lösung nicht mehrmöglich dass zumindest für ioBroker helfen könnte in der Callback-Adresse der hm-rpc die Ip des iobrokers einzutragen
Aber irgendwo ist bei dir der Wurm drin
-
@afi sagte in Homematic Adapter:
Alle iP Geräte blinken nach Aktion mehrmals orange und am Schluss einmal rot
Damit bist Du wohl nicht der Einzigste, siehe:
https://de.elv.com/forum/hmip-wth-2-blinkt-erst-mehrfach-orange-und-dann-rot.-18121Evtle. Empfangsprobleme?:
Schau Dir mal in der Homematic WebUI unter Einstellungen -> Geräte die Werte für die Empfangs/Sendestärke (dBm) an. Je näher die Werte zu 0 tendieren, desto besser ( also -50 dBm ist besser als -67 dBm).Eine einfache Empfangsverbesserung konnte ich bei mir durch geringfügige Verlegung des "Antennendrahtes" realisieren:
https://forum.iobroker.net/topic/34377/tipp-hm-sec-sco-empfangsprobleme-gelöst -
@joergeli Hi Jörg, den Artikel kenne ich auch und warte auf die Antwort von EQ3. Dein Vorschlag ist ok, jedoch etwas schwierig in einem Tür- oder Fensterrahmen.
Derzeit prüfe ich die Firewall der CCU3, da hat sich wohl bei den Ports etwas geändert, scheiß updates, never touch a running system.
Gruß Axel
-
@afi sagte in Homematic Adapter:
Dein Vorschlag ist ok, jedoch etwas schwierig in einem Tür- oder Fensterrahmen.
Dann einfach mal die CCU um 90 Grad drehen, kann schon Verbesserung bringen.
@afi sagte in Homematic Adapter:
Derzeit prüfe ich die Firewall der CCU3, da hat sich wohl bei den Ports etwas geändert, scheiß updates, never touch a running system.
Ich habe ja auch Anfang der Woche die aktuelle Firmware für meine RaspBerryMatic eingespielt, die sich wohl kaum von der Firmware für die CCU unterscheidet?
Das mit der Firewall auf der CCU/RaspberryMatic checke ich nicht ganz, wozu soll die gut sein, wenn doch die FritzBox schon alle externen Zugriffe blockt (keine Portweiterleitungen) - oder habe ich da einen Denkfehler?
Bei mir sind auf der RaspberryMatic-Firewall jedenfalls alle Ports offen und die APIs haben Vollzugriff. -
@joergeli sagte in Homematic Adapter:
die aktuelle Firmware für meine RaspBerryMatic eingespielt, die sich wohl kaum von der Firmware für die CCU unterscheidet?
doch!
in die CCU kommen die Änderungen, die Jens Maus in seiner Raspberrymatic eingeführt hatte erst um einiges später an.@joergeli sagte in Homematic Adapter:
Das mit der Firewall auf der CCU/RaspberryMatic checke ich nicht ganz, wozu soll die gut sein, wenn doch die FritzBox schon alle externen Zugriffe blockt (keine Portweiterleitungen) - oder habe ich da einen Denkfehler?
Es könnten ja auch Zugriffe aus dem eigenen Netz kommen.
Jede zusätzliche Sicherung ist eine gute Sicherung
@afi sagte in Homematic Adapter:
Derzeit prüfe ich die Firewall der CCU3, da hat sich wohl bei den Ports etwas geändert,
das dürfte aber nicht mehr das Problem sein.
Die gelb..gelb..rot.. Problematic ist innerhalb der HomeMatic und hat nichts mit der Firewall zu tun.
Passt aber zu deinen Meldungen ...cannot setValue -
Hi,
@joergeli said in Homematic Adapter:
Dann einfach mal die CCU um 90 Grad drehen, kann schon Verbesserung bringen.
Die CCU3 hat eine extra Antenne, da dies bei der CCU3 sowieso ein Problem ist, zudem gibt es noch ein LAN-Gateway (im LAN über fritzrepeater) und selbst ein Rollo Aktor Funk in 1 m Entfernungen macht zicken.Damit sind wir beim nächsten Thema, die Analyse ergab, dass viel Rollo Aktoren (Funk) zicken machen, anbei das Blockly Programm für Rollos abends ab, würde ich gern, jedoch zu groß, wie bring ich das rüber?
Soll ich die CUU mal downgraden, kann mir jemand helfen wie das geht?
Die Firewall in der CCU3 ist ok und es hat sich doch nichts verändert, bei Ports für rpc sind enthalten.
Gruß Axel
-
Hi,
@afi said in Homematic Adapter:
Die CCU3 hat eine extra Antenne, da dies bei der CCU3 sowieso ein Problem ist, zudem gibt es noch ein LAN-Gateway (im LAN über fritzrepeater) und selbst ein Rollo Aktor Funk in 1 m Entfernungen macht zicken.
dies stammte von mir.
Gruß Axel
-
@afi Hast du auch Batterie Devices? Mal geprüft ob vielleicht eine der Batterien zu neige geht.
Das wirkt sich leider oft negativ auf die komplette Funk Kommunikation aus.
