[erl]Homematic Adapter

AFi

Hi Homoran, eventuell klärst Du mich auf wie das zitieren in der Praxis funktioniert, Danke
Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

wie das zitieren in der Praxis funktioniert,

Textstelle markieren
in dem zu zitierenden Post rechts unten auf zitieren klicken
fertig

AFi

@homoran Hi Danke,

@homoran said in Homematic Adapter:

Textstelle markieren

ok klappt,

anbei nochmals eine Zusammenfassung der Fehler über mehrere Tage, werde jetzt auch die Adapter und die entsprechenden Blockly Bereich prüfen.
Diese Fehlermeldungen rühren verm. von der Einrichtung Alias
Gruß
Axel

2021-03-20 20:00:07.964 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.966 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.968 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.971 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.973 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.974 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.976 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.977 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.979 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.980 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.982 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.983 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.985 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99164E9.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.168 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.169 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.171 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.ERROR_UNDERVOLTAGE_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.172 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.184 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.186 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.188 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.191 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.193 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.195 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.217 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.219 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.221 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.224 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.226 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.228 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.230 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.232 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.233 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.236 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000DBE99AE85C.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions

Homoran

@afi sagte in Homematic Adapter:

Diese Fehlermeldungen rühren verm. von der Einrichtung Alias

da ist jetzt aber der dritte Homematic-Adapter involviert:

@afi sagte in Homematic Adapter:

hm-rega.0 (31752)

die dortige "Fehlermeldung" ist für den Entwickler.
@afi sagte in Homematic Adapter:

has no existing object, this might lead to an error in future versions

Welche Version nutzst du da?

AFi

Hi und hier der Rest aus mehreren Tagen

2021-03-27 10:30:46.400	error	(2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-27 10:30:46.398	error	(2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL
2021-03-26 06:48:14.831 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:48:14.838 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 06:48:32.100 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:48:32.100 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 06:48:47.017 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:48:47.017 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 06:50:43.386 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:50:43.387 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)

2021-03-26 06:51:07.405 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:51:07.405 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 07:00:00.022 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 started with pid 8879
2021-03-26 07:00:00.403 - info: coronavirus-statistics.0 (8879) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2021-03-26 07:00:00.407 - info: coronavirus-statistics.0 (8879) starting. Version 0.6.3 in /opt/iobroker/node_modules/iobroker.coronavirus-statistics, node: v12.21.0, js-controller: 3.2.16
2021-03-26 07:00:06.311 - info: coronavirus-statistics.0 (8879) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-03-26 07:00:06.825 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-03-26 07:08:18.494 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 07:08:18.495 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 07:08:34.706 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 07:08:34.706 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 07:08:49.606 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 07:08:49.607 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 07:15:12.020 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1852853:1","LEVEL",1] FLOAT
2021-03-26 07:15:12.025 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 07:15:16.021 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1856555:1","LEVEL",1] FLOAT
2021-03-26 07:15:16.022 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 08:55:13.903 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 08:55:13.903 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 08:55:38.341 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 08:55:38.342 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 08:55:53.102 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 0:55:53.102 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 09:00:10.813 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-26 09:00:10.813 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-26 12:16:55.020 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:16:55.024 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 12:17:10.931 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:17:10.931 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 12:17:25.837 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:17:25.838 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 12:17:30.609 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:17:30.609 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-26 12:18:08.544 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:18:08.544 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 12:18:23.450 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:18:23.450 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 13:37:33.769 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:37:33.769 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 13:37:50.278 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:37:50.279 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 13:38:05.191 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:38:05.191 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 13:40:27.520 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:40:27.520 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 13:40:52.065 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:40:52.065 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 13:41:06.980 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:41:06.980 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 18:19:13.448 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL
2021-03-26 18:19:13.451 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 18:30:00.017 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 started with pid 14158
2021-03-26 18:57:24.993 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1856674:1","LEVEL",0.08] FLOAT
2021-03-26 18:57:24.993 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 20:00:04.035 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-26 20:00:04.036 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 20:00:10.697 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-26 20:00:10.701 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-25 19:18:08.289 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL
2021-03-25 19:18:08.292 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-25 20:00:02.899 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-25 20:00:02.902 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-25 20:00:06.887 - info: coronavirus-statistics.0 (4295) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-03-25 20:00:10.573 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-25 20:00:10.573 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-25 21:57:04.379 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL
2021-03-25 21:57:04.382 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-24 07:20:23.551 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:20:23.571 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 07:20:40.317 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:20:40.318 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 07:20:55.209 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:20:55.210 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 07:21:14.282 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:21:14.282 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 07:21:38.209 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:21:38.209 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 07:21:53.141 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:21:53.142 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 09:00:10.548 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-24 09:00:10.549 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-24 09:15:07.931 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL
2021-03-24 09:15:07.936 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-24 09:17:58.678 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL
2021-03-24 09:17:58.678 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-24 19:25:27.034 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:25:27.038 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:25:44.859 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:25:44.859 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:25:59.712 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:25:59.712 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:29:10.207 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:29:10.207 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:29:34.440 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:29:34.440 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:29:49.327 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:29:49.327 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:48:44.850 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:48:44.850 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:49:01.508 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:01.509 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:49:16.416 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:16.417 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:49:31.526 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:31.527 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:49:46.535 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:46.536 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:49:58.800 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:58.800 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:49:59.259 - error: hm-rpc.2 (16673) Ping error [NUCioBroker:hm-rpc.2]: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:49:59.259 - info: hm-rpc.2 (16673) Disconnected
2021-03-24 19:50:01.551 - info: hm-rpc.2 (16673) Connected
2021-03-24 20:00:03.107 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-24 20:00:03.111 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-24 20:00:10.769 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-24 20:00:10.769 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-24 21:24:57.560 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL
2021-03-24 21:24:57.563 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-23 07:01:19.297 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:01:19.303 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 07:01:36.224 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:01:36.224 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 07:01:51.114 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:01:51.114 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-23 07:02:32.721 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:02:32.721 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 07:02:56.359 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:02:56.359 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 07:03:11.268 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:03:11.269 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-23 09:00:10.748 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-23 09:00:10.749 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-23 16:50:18.567 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:50:18.570 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 16:50:34.794 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:50:34.794 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 16:50:49.696 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:50:49.696 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-23 16:51:32.444 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:51:32.444 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 16:51:43.515 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:51:43.516 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-23 16:51:45.854 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["QEQ0314259:2","STATE",false] BOOL
2021-03-23 16:51:45.861 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-23 16:51:58.550 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:51:58.551 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 18:49:36.019 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1853114:1","LEVEL",0.04] FLOAT
2021-03-23 18:49:36.023 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-23 20:00:02.965 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-23 20:00:02.968 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-23 20:00:10.623 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-23 20:00:10.626 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-22 06:19:17.397 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["LTK0090711:4","SET_TEMPERATURE",18] FLOAT
2021-03-22 06:19:17.403 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-22 07:23:00.499 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:23:00.504 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-22 07:23:30.326 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:23:30.326 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:23:45.234 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:23:45.234 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 07:25:46.356 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:25:46.356 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:26:11.542 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:26:11.542 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:26:26.451 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:26:26.451 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 07:44:24.279 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:44:24.280 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:44:40.191 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:44:40.192 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:44:55.008 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:44:55.009 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 07:45:25.283 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:45:25.283 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:45:49.401 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:45:49.401 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:46:04.308 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:46:04.308 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 09:00:10.620 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-22 09:00:10.621 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-22 16:26:46.998 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:26:47.001 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-22 16:27:16.379 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:27:16.380 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 16:27:31.291 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:27:31.292 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 16:28:24.240 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:28:24.240 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 16:28:48.800 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:28:48.800 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 16:29:03.716 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:29:03.716 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 20:00:02.825 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-22 20:00:02.828 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-22 20:00:10.476 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-22 20:00:10.479 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)

AFi

@homoran Hi Homoran, anbei die Versionen.

HomeMatic ReGaHSS	
Verbindet die Logikschicht einer HomeMatic CCU ("ReGaHSS") mit ioBroker
homematic eq3 regahss ccu1 ccu2
1	3.0.16


HomeMatic RPC	
Verbindet HomeMatic Interface-Prozesse (BidCos-Services, Homegear und CUxD) via XML-RPC oder BIN-RPC mit ioBroker
homematic bidcos eq3 ELV CCU CCU1 CCU2 rpc xmlrpc homegear binrpc CUxD FS20 FHT HMS EnOcean
2	1.14.35

Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

2021-03-26 06:48:14.838 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)

Ich weiß nicht ob das die vergleichbare Meldung ist, die ich auch hin und wieder habe, wenn der Empfänger von der CCU vorübergehend nicht erreichbar ist

Ich habe da so einen Kandidaten, der unter der Garage in der Werkstatt sit, zu dem es eine schlechte Funkverbindung gibt

Das hier kommt mir hingegen seltsam vor:
@afi sagte in Homematic Adapter:

2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0
Column: 0
Char:

Homoran

@afi sagte in Homematic Adapter:

anbei die Versionen.

das ist aber seltsam.
die Meldung
@afi sagte in Homematic Adapter:

has no existing object

sollte bereits mit der 3.0.15 gefixt sein
das entsprechende Issue wurde von @foxriver76 geschlossen
https://github.com/ioBroker/ioBroker.hm-rega/commit/a815e8ead2c88b8626b03845b2f664aed3b3e1f8

auch die hm-rpc-Version ist aktuell

AFi

@homoran Hi,

hier mal die erste Analyse für die Garagentore"Enum", keine Bestätigung des Door Command.

00241A49A768DE	
LinkesGaragentor
	device					
0	channel
LinkesGaragentor:0
	channel					
1	channel
LinkesGaragentor:1
	channel		Garage	${funcLock}		
DOOR_COMMAND	state
LinkesGaragentor:1.DOOR_COMMAND
	state		Garage	${funcLock}	NOP(0)	
DOOR_STATE	state
LinkesGaragentor:1.DOOR_STATE
	state		Garage	${funcLock}	CLOSED(0)	
ERROR_CODE	state
LinkesGaragentor:1.ERROR_CODE
	state	value	Garage	${funcLock}	0	
PROCESS	state
LinkesGaragentor:1.PROCESS
	state		Garage	${funcLock}	STABLE(0)	
SECTION	state
LinkesGaragentor:1.SECTION
	state		Garage	${funcLock}	0	
SECTION_STATUS	state
LinkesGaragentor:1.SECTION_STATUS
	state		Garage	${funcLock}	NORMAL(0)

Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

hier mal die erste Analyse für die Garagentore"Enum", keine Bestätigung des Door Command.

was willst du mir damit sagen?
Was ist das für eine Liste?

AFi

@homoran Hi, dann mal wieder als screenshot

Eigentlich, dass der Door Command keine Rückmeldung hat und somit vermutlich alles ein Kommunikationsproblem ist. Ich gebe zu, vermutlich alles wilde Vermutungen aber ich suche noch den
Ansatz.

Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

Eigentlich, dass der Door Command keine Rückmeldung hat und somit vermutlich alles ein Kommunikationsproblem ist.

was ist das für ein Gerät?
was ist door_command?

was ist mit deinen Funktionen?
da sollte etwas in Klartext stehen - nicht als Variable ${funcLock}

vielleicht einfach mal Geräte neu einlesen

Was syncst du denn alles laut HM-Rega?

AFi

@homoran

@homoran said in Homematic Adapter:

was ist das für ein Gerät?

HmIP-MOD-HO

@homoran said in Homematic Adapter:

was ist door_command?

Es ist sowohl eine Status Meldung als auch eine Befehlsebene, s. Blockly, Blockly wurde in dieser Zeit nie
ausgeführt, meistens wird Original Handsender verwendet, somit nur Stutus Meldungen.

@homoran said in Homematic Adapter:

Was syncst du denn alles laut HM-Rega?

Hoffentlich sind ab und zu Screenshots ok.

Gruß Axel

AFi

@homoran Hi, habe da noch eine offene Baustelle, die damit zutun haben könnte. Alle iP Geräte blinken nach Aktion mehrmals orange und am Schluss einmal rot, hoffe Homematic versucht einen nicht von der CCU auf die Cloud Ebene zu locken. Habe im Netz die Problematik gefunden aber keine Lösung.
Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

Hoffentlich sind ab und zu Screenshots ok.

an den richtigen Stellen immer!

@afi sagte in Homematic Adapter:

Alle iP Geräte blinken nach Aktion mehrmals orange und am Schluss einmal rot,

dann liegt dein Problem auf der CCU
Das bedeutet, dass das Emgfangsgerät den Befehl nicht erhalten hat

Auch das mit den chiffrierten Aufzählungsnamen ist ein problem der CCU
Ich weiß nur die Lösung nicht mehr

möglich dass zumindest für ioBroker helfen könnte in der Callback-Adresse der hm-rpc die Ip des iobrokers einzutragen

Aber irgendwo ist bei dir der Wurm drin

joergeli

@afi sagte in Homematic Adapter:

Alle iP Geräte blinken nach Aktion mehrmals orange und am Schluss einmal rot

Damit bist Du wohl nicht der Einzigste, siehe:
https://de.elv.com/forum/hmip-wth-2-blinkt-erst-mehrfach-orange-und-dann-rot.-18121

Evtle. Empfangsprobleme?:
Schau Dir mal in der Homematic WebUI unter Einstellungen -> Geräte die Werte für die Empfangs/Sendestärke (dBm) an. Je näher die Werte zu 0 tendieren, desto besser ( also -50 dBm ist besser als -67 dBm).

Eine einfache Empfangsverbesserung konnte ich bei mir durch geringfügige Verlegung des "Antennendrahtes" realisieren:
https://forum.iobroker.net/topic/34377/tipp-hm-sec-sco-empfangsprobleme-gelöst

AFi

@joergeli Hi Jörg, den Artikel kenne ich auch und warte auf die Antwort von EQ3. Dein Vorschlag ist ok, jedoch etwas schwierig in einem Tür- oder Fensterrahmen.

Derzeit prüfe ich die Firewall der CCU3, da hat sich wohl bei den Ports etwas geändert, scheiß updates, never touch a running system.

Gruß Axel

joergeli

@afi sagte in Homematic Adapter:

Dein Vorschlag ist ok, jedoch etwas schwierig in einem Tür- oder Fensterrahmen.

Dann einfach mal die CCU um 90 Grad drehen, kann schon Verbesserung bringen.

@afi sagte in Homematic Adapter:

Derzeit prüfe ich die Firewall der CCU3, da hat sich wohl bei den Ports etwas geändert, scheiß updates, never touch a running system.

Ich habe ja auch Anfang der Woche die aktuelle Firmware für meine RaspBerryMatic eingespielt, die sich wohl kaum von der Firmware für die CCU unterscheidet?
Das mit der Firewall auf der CCU/RaspberryMatic checke ich nicht ganz, wozu soll die gut sein, wenn doch die FritzBox schon alle externen Zugriffe blockt (keine Portweiterleitungen) - oder habe ich da einen Denkfehler?
Bei mir sind auf der RaspberryMatic-Firewall jedenfalls alle Ports offen und die APIs haben Vollzugriff.

Homoran

@joergeli sagte in Homematic Adapter:

die aktuelle Firmware für meine RaspBerryMatic eingespielt, die sich wohl kaum von der Firmware für die CCU unterscheidet?

doch!
in die CCU kommen die Änderungen, die Jens Maus in seiner Raspberrymatic eingeführt hatte erst um einiges später an.

@joergeli sagte in Homematic Adapter:

Das mit der Firewall auf der CCU/RaspberryMatic checke ich nicht ganz, wozu soll die gut sein, wenn doch die FritzBox schon alle externen Zugriffe blockt (keine Portweiterleitungen) - oder habe ich da einen Denkfehler?

Es könnten ja auch Zugriffe aus dem eigenen Netz kommen.

Jede zusätzliche Sicherung ist eine gute Sicherung

@afi sagte in Homematic Adapter:

Derzeit prüfe ich die Firewall der CCU3, da hat sich wohl bei den Ports etwas geändert,

das dürfte aber nicht mehr das Problem sein.

Die gelb..gelb..rot.. Problematic ist innerhalb der HomeMatic und hat nichts mit der Firewall zu tun.
Passt aber zu deinen Meldungen ...cannot setValue

AFi

Hi,

@joergeli said in Homematic Adapter:

Dann einfach mal die CCU um 90 Grad drehen, kann schon Verbesserung bringen.
Die CCU3 hat eine extra Antenne, da dies bei der CCU3 sowieso ein Problem ist, zudem gibt es noch ein LAN-Gateway (im LAN über fritzrepeater) und selbst ein Rollo Aktor Funk in 1 m Entfernungen macht zicken.

Damit sind wir beim nächsten Thema, die Analyse ergab, dass viel Rollo Aktoren (Funk) zicken machen, anbei das Blockly Programm für Rollos abends ab, würde ich gern, jedoch zu groß, wie bring ich das rüber?

Soll ich die CUU mal downgraden, kann mir jemand helfen wie das geht?

Die Firewall in der CCU3 ist ok und es hat sich doch nichts verändert, bei Ports für rpc sind enthalten.

Gruß Axel

Community Forum

NEWS

[erl]Homematic Adapter

Support us

689

32.6k

82.0k

1.3m