[erl]Homematic Adapter

AFi

Hi Homoran,

kannst Du mir bitte sagen, wie gespeichert logs gefiltert werden können.
Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

genau deshalb mach ich dies nicht gerne.

private Daten muss man dann unkenntlich machen.

Allerdings waren diese Informationen unnötig.
Die massiven Daten hatten mein Handy lahmgelegt.

Bitte nur relevantes posten, dieses aber nicht abgeschnitten.

Wie bereits geschrieben hast du anscheinend diverse "Problem" die du dann auch noch vermischst
.
Wenn die CCU3 upgedatet wurde, kann es sein, dass da die firewall wegen geänderter Sicherheitseinstellungen jetzt dichtmacht.

Die Fehlermeldung "you are assigning...." stammt garantiert von einem deiner Skripte und bezieht sich wahrscheinlich auf einen selbst angelegten Datenpunkt von falschem Typ.

Wenn es @joergeli gelungen war, dein log zu lesen und alle(??) Meldungen nur setValue Fehler waren, diese dann auch noch alle zeitgleich waren ist die wahrscheinlichkeit groß dass es hier Funkstörungen durch zeitgleiches Senden gab, oder zu diesem Zeitpunkt deine CCU3 nicht erreichbar war.

Hängt CCU und/oder ioBroker im WLAN?

Homoran

@afi sagte in Homematic Adapter:

wie gespeichert logs gefiltert werden können.

mit der Hand!
deswegen ergibt es auch keinen Sinn komplette logs zu posten.
Am Handy kann ich dann nichts damit anfangen

joergeli

@afi
Moin,

eins vorweg: vorhin konnte ich Deine Logs ( in den Code-Tags) noch lesen, jetzt sehe ich nur noch schwarze Zeilen.
~~Hast Du da was geändert?~~ -OK, ist jetzt klar @Homoran

Egal, wenn ich mich recht entsinne, stand im Log mehrfach was von "non existing datapoint/object" drin.
Vermutung: es wird - von was auch immer - versucht, auf diese nicht vorhandenen Datenpunkte zuzugreifen, was nicht funktioniert. Daraus resultieren dann wahrscheinlich die Folge-Fehlermeldungen.

Bei der Alias-Geschichte bin ich raus, ich habe selber keine Alias-Datenpunkte.

Warnung!!! : Bevor Du das Folgende machst, bitte auf weitere Antworten von kompetenteren Usern warten, da ich nicht der Crack in diesen Sachen bin.
Was evtl. helfen könnte: Alle! Datenpunkte der Aktoren/Sensoren in der betroffenen Instanz hm-rpc.2 manuell zu löschen und dann die Instanz neu starten. Dann sollten meines Wissens die entspr. Datenpunkte neu angelegt werden.
(was dann allerdings mit Deinen Aliasen passiert, weiß ich nicht!)

Homoran

@joergeli sagte in Homematic Adapter:

Hast Du da was geändert?

ja! auf meine Anforderung, weil da private Daten drin waren

AFi

Hallo zusammen,

schön, dass Ihr mir helft, ich versuch mal alles zu beantworten.

CCU und ioBroker hängen im LAN (war so immer empfohlen, was ich auch verstehe, wenn auch über einen Switch).

werde ich suchen

Da hab ich Alias eingerichtet in der Küche, ich habe da beobachtet, dass beim einrichten diese Fehler aufgrund nicht abgeschlossener Konfiguration entstehen, danach aber Ruhe ist. (mein ich zumindest).

Ich werde jetzt mal noch die CCU prüfen, ob sich in der Firewall was geändert hat, da sind ja Ports speziell
freigegeben.

Gruß Axel

Homoran

@afi
wieso machst du immer noch Screenshots, statt den text als code oder als Quote zu posten?
So kann man ihn selber nicht noch mal zitieren.

@afi sagte in Homematic Adapter:

CCU und ioBroker hängen im LAN (war so immer empfohlen, was ich auch verstehe, wenn auch über einen Switch).

Das ist gut so!

@afi sagte in Homematic Adapter:

Ich werde jetzt mal noch die CCU prüfen, ob sich in der Firewall was geändert hat, da sind ja Ports speziell
freigegeben.

das ist anscheinend nicht nötig, wenn alles andere (jeweils für eine Instanz) durchkommt.

AFi

Hi Homoran, eventuell klärst Du mich auf wie das zitieren in der Praxis funktioniert, Danke
Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

wie das zitieren in der Praxis funktioniert,

Textstelle markieren
in dem zu zitierenden Post rechts unten auf zitieren klicken
fertig

AFi

@homoran Hi Danke,

@homoran said in Homematic Adapter:

Textstelle markieren

ok klappt,

anbei nochmals eine Zusammenfassung der Fehler über mehrere Tage, werde jetzt auch die Adapter und die entsprechenden Blockly Bereich prüfen.
Diese Fehlermeldungen rühren verm. von der Einrichtung Alias
Gruß
Axel

2021-03-20 20:00:07.964 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.966 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.968 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.971 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000D709A14E73.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.973 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.974 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.976 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.977 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A98A21CF.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.979 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.980 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.982 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.SABOTAGE_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.983 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99165DC.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:07.985 - warn: hm-rega.0 (31752) State "hm-rpc.2.001098A99164E9.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.168 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.169 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.171 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.ERROR_UNDERVOLTAGE_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.172 - warn: hm-rega.0 (31752) State "hm-rpc.2.00161BE991BFAD.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.184 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.186 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.188 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98F0BC0.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.191 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.193 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.195 - warn: hm-rega.0 (31752) State "hm-rpc.2.00085BE98EFAEE.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.217 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.219 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.221 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4DD9.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.224 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.226 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.LOW_BAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.228 - warn: hm-rega.0 (31752) State "hm-rpc.2.000A1BE99B4920.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.230 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.232 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.ERROR_OVERHEAT_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.233 - warn: hm-rega.0 (31752) State "hm-rpc.2.001A5A499B4304.0.UNREACH_ALARM" has no existing object, this might lead to an error in future versions
2021-03-20 20:00:08.236 - warn: hm-rega.0 (31752) State "hm-rpc.2.0000DBE99AE85C.0.CONFIG_PENDING_ALARM" has no existing object, this might lead to an error in future versions

Homoran

@afi sagte in Homematic Adapter:

Diese Fehlermeldungen rühren verm. von der Einrichtung Alias

da ist jetzt aber der dritte Homematic-Adapter involviert:

@afi sagte in Homematic Adapter:

hm-rega.0 (31752)

die dortige "Fehlermeldung" ist für den Entwickler.
@afi sagte in Homematic Adapter:

has no existing object, this might lead to an error in future versions

Welche Version nutzst du da?

AFi

Hi und hier der Rest aus mehreren Tagen

2021-03-27 10:30:46.400	error	(2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-27 10:30:46.398	error	(2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL
2021-03-26 06:48:14.831 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:48:14.838 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 06:48:32.100 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:48:32.100 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 06:48:47.017 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:48:47.017 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 06:50:43.386 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:50:43.387 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)

2021-03-26 06:51:07.405 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:51:07.405 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 07:00:00.022 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 started with pid 8879
2021-03-26 07:00:00.403 - info: coronavirus-statistics.0 (8879) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2021-03-26 07:00:00.407 - info: coronavirus-statistics.0 (8879) starting. Version 0.6.3 in /opt/iobroker/node_modules/iobroker.coronavirus-statistics, node: v12.21.0, js-controller: 3.2.16
2021-03-26 07:00:06.311 - info: coronavirus-statistics.0 (8879) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-03-26 07:00:06.825 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2021-03-26 07:08:18.494 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 07:08:18.495 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 07:08:34.706 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 07:08:34.706 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 07:08:49.606 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 07:08:49.607 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 07:15:12.020 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1852853:1","LEVEL",1] FLOAT
2021-03-26 07:15:12.025 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 07:15:16.021 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1856555:1","LEVEL",1] FLOAT
2021-03-26 07:15:16.022 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 08:55:13.903 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 08:55:13.903 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 08:55:38.341 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 08:55:38.342 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 08:55:53.102 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 0:55:53.102 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 09:00:10.813 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-26 09:00:10.813 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-26 12:16:55.020 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:16:55.024 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 12:17:10.931 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:17:10.931 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 12:17:25.837 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:17:25.838 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 12:17:30.609 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:17:30.609 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-26 12:18:08.544 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:18:08.544 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 12:18:23.450 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 12:18:23.450 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 13:37:33.769 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:37:33.769 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 13:37:50.278 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:37:50.279 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 13:38:05.191 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:38:05.191 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 13:40:27.520 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:40:27.520 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 13:40:52.065 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:40:52.065 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-26 13:41:06.980 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-26 13:41:06.980 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-26 18:19:13.448 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL
2021-03-26 18:19:13.451 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 18:30:00.017 - info: host.NUCioBroker instance system.adapter.coronavirus-statistics.0 started with pid 14158
2021-03-26 18:57:24.993 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1856674:1","LEVEL",0.08] FLOAT
2021-03-26 18:57:24.993 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 20:00:04.035 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-26 20:00:04.036 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-26 20:00:10.697 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-26 20:00:10.701 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-25 19:18:08.289 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL
2021-03-25 19:18:08.292 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-25 20:00:02.899 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-25 20:00:02.902 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-25 20:00:06.887 - info: coronavirus-statistics.0 (4295) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2021-03-25 20:00:10.573 - error: hm-rpc.2 (2618) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-25 20:00:10.573 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-25 21:57:04.379 - error: hm-rpc.1 (2633) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL
2021-03-25 21:57:04.382 - error: hm-rpc.1 (2633) Cannot call setValue: XML-RPC fault: Failure
2021-03-24 07:20:23.551 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:20:23.571 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 07:20:40.317 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:20:40.318 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 07:20:55.209 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:20:55.210 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 07:21:14.282 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:21:14.282 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 07:21:38.209 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:21:38.209 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 07:21:53.141 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 07:21:53.142 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 09:00:10.548 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-24 09:00:10.549 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-24 09:15:07.931 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL
2021-03-24 09:15:07.936 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-24 09:17:58.678 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",false] BOOL
2021-03-24 09:17:58.678 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-24 19:25:27.034 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:25:27.038 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:25:44.859 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:25:44.859 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:25:59.712 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:25:59.712 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:29:10.207 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:29:10.207 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:29:34.440 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:29:34.440 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:29:49.327 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:29:49.327 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:48:44.850 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:48:44.850 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:49:01.508 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:01.509 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:49:16.416 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:16.417 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:49:31.526 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:31.527 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:49:46.535 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:46.536 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-24 19:49:58.800 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-24 19:49:58.800 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:49:59.259 - error: hm-rpc.2 (16673) Ping error [NUCioBroker:hm-rpc.2]: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-24 19:49:59.259 - info: hm-rpc.2 (16673) Disconnected
2021-03-24 19:50:01.551 - info: hm-rpc.2 (16673) Connected
2021-03-24 20:00:03.107 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-24 20:00:03.111 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-24 20:00:10.769 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-24 20:00:10.769 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-24 21:24:57.560 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1851757:1","INHIBIT",true] BOOL
2021-03-24 21:24:57.563 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-23 07:01:19.297 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:01:19.303 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 07:01:36.224 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:01:36.224 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 07:01:51.114 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:01:51.114 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-23 07:02:32.721 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:02:32.721 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 07:02:56.359 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:02:56.359 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 07:03:11.268 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 07:03:11.269 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-23 09:00:10.748 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-23 09:00:10.749 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-23 16:50:18.567 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:50:18.570 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 16:50:34.794 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:50:34.794 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 16:50:49.696 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:50:49.696 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-23 16:51:32.444 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:51:32.444 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 16:51:43.515 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:51:43.516 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-23 16:51:45.854 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["QEQ0314259:2","STATE",false] BOOL
2021-03-23 16:51:45.861 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-23 16:51:58.550 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-23 16:51:58.551 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-23 18:49:36.019 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ1853114:1","LEVEL",0.04] FLOAT
2021-03-23 18:49:36.023 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-23 20:00:02.965 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-23 20:00:02.968 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-23 20:00:10.623 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-23 20:00:10.626 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-22 06:19:17.397 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["LTK0090711:4","SET_TEMPERATURE",18] FLOAT
2021-03-22 06:19:17.403 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-22 07:23:00.499 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:23:00.504 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-22 07:23:30.326 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:23:30.326 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:23:45.234 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:23:45.234 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 07:25:46.356 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:25:46.356 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:26:11.542 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:26:11.542 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:26:26.451 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:26:26.451 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 07:44:24.279 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:44:24.280 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:44:40.191 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:44:40.192 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:44:55.008 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:44:55.009 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 07:45:25.283 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:45:25.283 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:45:49.401 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:45:49.401 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 07:46:04.308 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 07:46:04.308 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 09:00:10.620 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-22 09:00:10.621 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-22 16:26:46.998 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:26:47.001 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)
2021-03-22 16:27:16.379 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:27:16.380 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 16:27:31.291 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:27:31.292 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 16:28:24.240 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:28:24.240 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 16:28:48.800 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A768DE:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:28:48.800 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)
2021-03-22 16:29:03.716 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["00241A49A769B3:1","DOOR_COMMAND",0] ENUM
2021-03-22 16:29:03.716 - error: hm-rpc.2 (16673) Cannot call setValue: Unexpected end
Line: 0
Column: 0
Char: 
2021-03-22 20:00:02.825 - error: hm-rpc.1 (15802) xmlrpc -> setValue ["OEQ0576336:2","SET_TEMPERATURE",18] FLOAT
2021-03-22 20:00:02.828 - error: hm-rpc.1 (15802) Cannot call setValue: XML-RPC fault: Failure
2021-03-22 20:00:10.476 - error: hm-rpc.2 (16673) xmlrpc -> setValue ["000A9A49A4D8CB:1","SET_POINT_TEMPERATURE",18] FLOAT
2021-03-22 20:00:10.479 - error: hm-rpc.2 (16673) Cannot call setValue: XML-RPC fault: Generic error (UNREACH)

AFi

@homoran Hi Homoran, anbei die Versionen.

HomeMatic ReGaHSS	
Verbindet die Logikschicht einer HomeMatic CCU ("ReGaHSS") mit ioBroker
homematic eq3 regahss ccu1 ccu2
1	3.0.16


HomeMatic RPC	
Verbindet HomeMatic Interface-Prozesse (BidCos-Services, Homegear und CUxD) via XML-RPC oder BIN-RPC mit ioBroker
homematic bidcos eq3 ELV CCU CCU1 CCU2 rpc xmlrpc homegear binrpc CUxD FS20 FHT HMS EnOcean
2	1.14.35

Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

2021-03-26 06:48:14.838 - error: hm-rpc.2 (2618) Cannot call setValue: XML-RPC fault: Generic error (TIMEOUT)

Ich weiß nicht ob das die vergleichbare Meldung ist, die ich auch hin und wieder habe, wenn der Empfänger von der CCU vorübergehend nicht erreichbar ist

Ich habe da so einen Kandidaten, der unter der Garage in der Werkstatt sit, zu dem es eine schlechte Funkverbindung gibt

Das hier kommt mir hingegen seltsam vor:
@afi sagte in Homematic Adapter:

2021-03-26 06:51:22.329 - error: hm-rpc.2 (2618) Cannot call setValue: Unexpected end Line: 0
Column: 0
Char:

Homoran

@afi sagte in Homematic Adapter:

anbei die Versionen.

das ist aber seltsam.
die Meldung
@afi sagte in Homematic Adapter:

has no existing object

sollte bereits mit der 3.0.15 gefixt sein
das entsprechende Issue wurde von @foxriver76 geschlossen
https://github.com/ioBroker/ioBroker.hm-rega/commit/a815e8ead2c88b8626b03845b2f664aed3b3e1f8

auch die hm-rpc-Version ist aktuell

AFi

@homoran Hi,

hier mal die erste Analyse für die Garagentore"Enum", keine Bestätigung des Door Command.

00241A49A768DE	
LinkesGaragentor
	device					
0	channel
LinkesGaragentor:0
	channel					
1	channel
LinkesGaragentor:1
	channel		Garage	${funcLock}		
DOOR_COMMAND	state
LinkesGaragentor:1.DOOR_COMMAND
	state		Garage	${funcLock}	NOP(0)	
DOOR_STATE	state
LinkesGaragentor:1.DOOR_STATE
	state		Garage	${funcLock}	CLOSED(0)	
ERROR_CODE	state
LinkesGaragentor:1.ERROR_CODE
	state	value	Garage	${funcLock}	0	
PROCESS	state
LinkesGaragentor:1.PROCESS
	state		Garage	${funcLock}	STABLE(0)	
SECTION	state
LinkesGaragentor:1.SECTION
	state		Garage	${funcLock}	0	
SECTION_STATUS	state
LinkesGaragentor:1.SECTION_STATUS
	state		Garage	${funcLock}	NORMAL(0)

Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

hier mal die erste Analyse für die Garagentore"Enum", keine Bestätigung des Door Command.

was willst du mir damit sagen?
Was ist das für eine Liste?

AFi

@homoran Hi, dann mal wieder als screenshot

Eigentlich, dass der Door Command keine Rückmeldung hat und somit vermutlich alles ein Kommunikationsproblem ist. Ich gebe zu, vermutlich alles wilde Vermutungen aber ich suche noch den
Ansatz.

Gruß Axel

Homoran

@afi sagte in Homematic Adapter:

Eigentlich, dass der Door Command keine Rückmeldung hat und somit vermutlich alles ein Kommunikationsproblem ist.

was ist das für ein Gerät?
was ist door_command?

was ist mit deinen Funktionen?
da sollte etwas in Klartext stehen - nicht als Variable ${funcLock}

vielleicht einfach mal Geräte neu einlesen

Was syncst du denn alles laut HM-Rega?

AFi

@homoran

@homoran said in Homematic Adapter:

was ist das für ein Gerät?

HmIP-MOD-HO

@homoran said in Homematic Adapter:

was ist door_command?

Es ist sowohl eine Status Meldung als auch eine Befehlsebene, s. Blockly, Blockly wurde in dieser Zeit nie
ausgeführt, meistens wird Original Handsender verwendet, somit nur Stutus Meldungen.

@homoran said in Homematic Adapter:

Was syncst du denn alles laut HM-Rega?

Hoffentlich sind ab und zu Screenshots ok.

Gruß Axel

Community Forum

NEWS

[erl]Homematic Adapter

Support us

629

32.6k

82.0k

1.3m