Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[Kitz252]

@unclesam
Hier sollten die Infos enthalten sein. Komisch finde ich dass bei iobroker stop kommt dass er nicht läuft und bei restore dann dass ich zuerst stoppen muss. Ich habe auch schon den Task manuell beendet, dann hat restore funktioniert, bezüglich Fehlermeldungen müsste ich nochmals probieren.

C:\Program Files\iobroker\SmartHome>iobroker stop

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js stop
iobroker controller daemon is not running

C:\Program Files\iobroker\SmartHome>iobroker restore

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js restore
Stop iobroker first!

C:\Program Files\iobroker\SmartHome>iobroker stop all

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js stop all
The adapter "admin.0" was stopped.
The adapter "info.0" was stopped.

C:\Program Files\iobroker\SmartHome> node -v
v10.17.0

C:\Program Files\iobroker\SmartHome>npm -v
6.11.3

C:\Program Files\iobroker\SmartHome>iobroker start

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js start
Starting iobroker controller daemon...

C:\Program Files\iobroker\SmartHome>iobroker start admin

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js start admin
The adapter "admin.0" was started.

C:\Program Files\iobroker\SmartHome>iobroker list adapters

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js list adapters
system.adapter.admin                   : admin          - v4.1.11
system.adapter.info                    : info           - v1.7.14

C:\Program Files\iobroker\SmartHome>iobroker list instances

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js list instances
+ system.adapter.admin.0                 : admin                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.info.0                  : info                  -  enabled

+ instance is alive

C:\Program Files\iobroker\SmartHome>

[UncleSam]

@kitz252 said in iobroker läuft nicht mehr nach Win10 update:

Ich habe auch schon den Task manuell beendet, dann hat restore funktioniert, bezüglich Fehlermeldungen müsste ich nochmals probieren.

Den Service hast du auch schon versucht zu stoppen und starten?

Verstehe ich es richtig, dass es nun wieder geht und das Restore erfolgreich war?

[Kitz252]

@unclesam
Nein es funktioniert leider noch nicht.
Wenn ich den Prozess Node.js: Server-side JavaScript im Taskmanager beende kann ich restore starten und es kommt folgende meldung.

C:\Program Files\iobroker\SmartHome>iobroker stop all

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js stop all
The adapter "admin.0" was stopped.
The adapter "info.0" was stopped.

C:\Program Files\iobroker\SmartHome>iobroker stop

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js stop
Stopping iobroker controller daemon...
iobroker controller daemon stopped.

C:\Program Files\iobroker\SmartHome>iobroker restore

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js restore
Stop iobroker first!

C:\Program Files\iobroker\SmartHome>iobroker restore

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js restore
Please specify one of the backup names:
2020_12_11-06_38_10_backupiobroker.tar.gz or 2020_12_11-06_38_10 or 0

C:\Program Files\iobroker\SmartHome>iobroker restore 0

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js restore 0
Stop iobroker first!

C:\Program Files\iobroker\SmartHome>iobroker restore 0

C:\Program Files\iobroker\SmartHome>node node_modules/iobroker.js-controller/iobroker.js restore 0
host.DESKTOP-0JM9MHB(SmartHome) Using backup file 2020_12_11-06_38_10_backupiobroker.tar.gz
iobroker controller daemon is not running
host.DESKTOP-0JM9MHB(SmartHome) OK.
host.DESKTOP-0JM9MHB(SmartHome) Clear all objects and states...
clean 350 objects...
[Not critical] Cannot delete object 0_userdata.0: "Object is marked as non deletable"
[Not critical] Cannot delete object alias.0: "Object is marked as non deletable"
[Not critical] Cannot delete object system.repositories: "Object is marked as non deletable"
[Not critical] Cannot delete object system.config: "Object is marked as non deletable"
[Not critical] Cannot delete object enum.functions: "Object is marked as non deletable"
[Not critical] Cannot delete object enum.rooms: "Object is marked as non deletable"
clean 3553 states...
host.DESKTOP-0JM9MHB(SmartHome) done.
host.DESKTOP-0JM9MHB(SmartHome) Processed 0/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 200/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 400/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 600/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 800/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 1000/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 1200/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 1400/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 1600/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 1800/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 2000/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 2200/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 2400/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 2600/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 2800/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 3000/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 3200/3588 states
host.DESKTOP-0JM9MHB(SmartHome) Processed 3400/3588 states
3588 states restored.
host.DESKTOP-0JM9MHB(SmartHome) Processed 0/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 200/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 400/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 600/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 800/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 1000/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 1200/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 1400/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 1600/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 1800/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 2000/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 2200/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 2400/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 2600/4316 objects
host.DESKTOP-0JM9MHB(SmartHome) Processed 2800/4316 objects
C:\Program Files\iobroker\SmartHome\node_modules\iobroker.js-controller\lib\objects\objectsInMemFileDB.js:243
                delete this.dataset[id].acl.file;
                                        ^

TypeError: Cannot convert undefined or null to object
    at ObjectsInMemoryServer.setDefaultAcl (C:\Program Files\iobroker\SmartHome\node_modules\iobroker.js-controller\lib\objects\objectsInMemFileDB.js:243:41)
    at ObjectsInMemoryServer._setObject (C:\Program Files\iobroker\SmartHome\node_modules\iobroker.js-controller\lib\objects\objectsInMemFileDB.js:1862:25)
    at utils.checkObjectRights (C:\Program Files\iobroker\SmartHome\node_modules\iobroker.js-controller\lib\objects\objectsInMemFileDB.js:2023:29)
    at Object.checkObjectRights (C:\Program Files\iobroker\SmartHome\node_modules\iobroker.js-controller\lib\objects\objectsUtils.js:581:16)
    at ObjectsInMemoryServer.setObject (C:\Program Files\iobroker\SmartHome\node_modules\iobroker.js-controller\lib\objects\objectsInMemFileDB.js:2019:15)
    at BackupRestore._setObjHelper (C:\Program Files\iobroker\SmartHome\node_modules\iobroker.js-controller\lib\setup\setupBackup.js:427:22)
    at runCallback (timers.js:706:11)
    at tryOnImmediate (timers.js:676:5)
    at processImmediate (timers.js:658:5)

C:\Program Files\iobroker\SmartHome>

[Kitz252]

@unclesam said in iobroker läuft nicht mehr nach Win10 update:

Den Service hast du auch schon versucht zu stoppen und starten?

Welchen Service kann ich wie stoppen?

[UweRLP]

Wie wurde ioBroker installiert? Mit altem Installer, neuerem Installer oder von Hand?
Wurde mit dem neueren Installer installiert, der Pfad deutet darauf hin, ist es wichtig die mitinstallierte CMD im Startmenü zu benutzen!

[Kitz252]

@unclesam
Zur Info. Bei meinen Zahlreichen versuchen mit den Tipps auf https://www.iobroker.net/docu/index-26.htm?page_id=3928&lang=de kam bei der Installation auch mal die Fehlermeldung dass ein File im ordner node_modules\unix-dgram nicht gefunden wird. Der Ordner unix-dgram fehlt auch komplett. Habe dann einen zweiten Admin adapter installiert. Mit viel hin und her probieren hat dann plötzlich die js installation funktioniert, wobei der ordner unix-dgram immer noch fehlt.
unter iobroker-date liegen auch noch die ganzen Ordner von den Adaptern die ich installiert hatte.
Vieleicht hilft diese Info noch weiter.

[Kitz252]

@uwerlp
seit dem Winupdate habe ich alles im cmd beim startmenü iobroker installiert

[sigi234]

@kitz252 said in iobroker läuft nicht mehr nach Win10 update:

@uwerlp
seit dem Winupdate habe ich alles im cmd beim startmenü iobroker installiert

Folgende Schritte sind bei einem Update und Neuinstallation zwingend notwendig:
data-Ordner sichern (nur bei Update)
Frische Installation mit dem Installer von der Webseite (2019-11-23) aufsetzen. Dabei (falls Update) den zuvor gesicherten data-Ordner durch den Installer einlesen.
Nichts weiter tun!
ioBroker-Konsole der neuen Installation auf
iobroker stop
npm i iobroker.js-controller@stable --ignore-scripts
iobroker start

Diese führt dich zu folgendem Workaround:
https://forum.iobroker.net/post/446928

[Kitz252]

@sigi234
Hat leider nicht funktioniert.
Bei der Installation konnte ich den selben Namen nicht mehr verwenden weil dieser schon vorhaden war. Habe die neue installation mit "Smarthome2021" installiert und den "iobroker-data" der vorhigen installation eingelesen.
iobroker stop
npm i iobroker.js-controller@stable --ignore-scripts
iobroker start
Leider wieder ohne erfolg.

Logfile der Installation:

Log started 01/17/2021 at 10:47:24
Preferred installation mode : win32
Trying to init installer in mode win32
Mode win32 successfully initialized
[10:47:25] Instance list: 'SmartHome'
[10:47:25] msiexec.exe version found: 5.0
[10:47:25] Microsft .NET release: 528372
[10:47:25] Git version found: 2.24.0.2
[10:47:25] Bonjour version found: 3.0.0.10
[10:47:25] OpenSSL version found: 1.0.2.17
Setting variable vs_buildtools_version from vswhere.exe -property installationVersion -format value -products Microsoft.VisualStudio.Product.BuildTools -utf8
Script exit code: 0

Script output:
 15.9.28307.1234

Script stderr:
 

[10:47:25] VS_BuildTools_2017 version found: 15.9.28307.1234
Executing certutil.exe -decode "C:\Users\marti\AppData\Local\Temp\jq.txt" "C:\Users\marti\AppData\Local\Temp\jq.exe"
Script exit code: 0

Script output:
 Eingabelänge = 3728172
Ausgabelänge = 2711358
CertUtil: -decode-Befehl wurde erfolgreich ausgeführt.

Script stderr:
 

iobroker.json
Executing jq.exe type "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\iobroker.json" | find /v /c ""
Script exit code: 0

Script output:
 1

Script stderr:
 

Setting variable multihostService from jq.exe -r .multihostService.enabled "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\iobroker.json"
Script exit code: 0

Script output:
 false

Script stderr:
 

Setting variable objectstype from jq.exe -r .objects.type "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\iobroker.json"
Script exit code: 0

Script output:
 file

Script stderr:
 

Setting variable statestype from jq.exe -r .states.type "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\iobroker.json"
Script exit code: 0

Script output:
 file

Script stderr:
 

objects.json
Executing jq.exe type "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\objects.json" | find /v /c ""
Script exit code: 0

Script output:
 1

Script stderr:
 

states.json
Executing jq.exe type "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\states.json" | find /v /c ""
Script exit code: 0

Script output:
 1

Script stderr:
 

Config
Setting variable mighostname from jq.exe -r ".|with_entries(select(.key|contains(\"system.host.\")))|.[].common.hostname | select(.==null|not)" "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\objects.json"
Script exit code: 0

Script output:
 DESKTOP-0JM9MHB(SmartHome)

Script stderr:
 

Setting variable port_admin from jq.exe -r .\"system.adapter.admin.0\".native.port "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\objects.json"
Script exit code: 0

Script output:
 8081

Script stderr:
 

Setting variable oldnode_version from jq.exe -r ".|with_entries(select(.key|contains(\"system.host.\")))|.[].native.process.versions.node | select(.==null|not)" "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\objects.json"
Script exit code: 0

Script output:
 10.17.0

Script stderr:
 

Setting variable winsw_id from jq.exe -r ".|with_entries(select(.key|contains(\"system.host.\")))|.[].native.process.env.WINSW_SERVICE_ID | select(.==null|not)" "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\objects.json"
Script exit code: 0

Script output:
 iobroker(SmartHome)

Script stderr:
 

Unable to stop iobroker(SmartHome) : Service not responding
Executing sc.exe config iobroker(SmartHome) start=disabled
Script exit code: 0

Script output:
 [SC] ChangeServiceConfig ERFOLG

Script stderr:
 

Setting variable port_objects from jq.exe -r .objects.port "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\iobroker.json"
Script exit code: 0

Script output:
 9001

Script stderr:
 

Setting variable port_states from jq.exe -r .states.port "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\iobroker.json"
Script exit code: 0

Script output:
 9000

Script stderr:
 

Bereite die Installation vor
Bereite die Installation vor
Executing powershell.exe -inputformat none -outputformat none -NonInteractive -Command "Add-MpPreference -ExclusionPath 'C:\Program Files\iobroker\SmartHome2021'" 
Script exit code: 0

Script output:
 

Script stderr:
 

Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\setup
Entpacke Dateien
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\python27.exe
Das Verzeichnis existiert bereits: C:\Program Files\iobroker\SmartHome2021\setup
Entpacke Dateien
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\nodepack.exe
Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\nodejs
Entpacke Dateien
Entpacke C:\Program Files\iobroker\SmartHome2021\nodejs\node.exe
Das Verzeichnis existiert bereits: C:\Program Files\iobroker\SmartHome2021\setup
Entpacke Dateien
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\iob.exe
Das Verzeichnis existiert bereits: C:\Program Files\iobroker\SmartHome2021\setup
Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\setup\patch
Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\setup\patch\daemon
Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\setup\patch\nodejs
Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\setup\patch\node_modules
Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\setup\patch\node_modules\iobroker.js-controller
Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\setup\patch\node_modules\iobroker.js-controller\conf
Erstelle Verzeichnis C:\Program Files\iobroker\SmartHome2021\setup\patch\setup
Entpacke Dateien
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\setup\subinacl.exe
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\iob.bat
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\iobroker.bat
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\serviceIoBroker.bat
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\daemon\iobroker.xml
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\nodejs\nodevars.bat
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\node_modules\iobroker.js-controller\_service_iobroker.bat
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\node_modules\iobroker.js-controller\conf\iobroker-dist.json
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\setup\servicesec.cmd
Entpacke C:\Program Files\iobroker\SmartHome2021\setup\patch\setup\setupfirst.cmd
Python 2.7.17
Python 2.7.17
Executing python27.exe -o.\.. -y
Script exit code: 0

Script output:
 
7-Zip SFX 19.00 (x86) : Copyright (c) 1999-2018 Igor Pavlov : 2019-02-21

Extracting archive: C:\Program Files\iobroker\SmartHome2021\setup\python27.exe
--
Path = C:\Program Files\iobroker\SmartHome2021\setup\python27.exe
Type = 7z

  0%
    
 29% 131
        
 63% 184 - python27\include\patchlevel.h
                                        
 63% 435 - python27\Lib\distutils\tests\test_ccompiler.py
                                                         
 63% 699 - python27\Lib\HTMLParser.py
                                     
 63% 966 - python27\Lib\lib2to3\tests\test_fixers.py
                                                    
 63% 1156 - python27\Lib\test\cjkencodings\hz.txt
                                                 
 63% 1408 - python27\Lib\test\testall.py
                                        
 63% 1677 - python27\Lib\test\test_print.py
                                           
 63% 1920 - python27\Lib\xml\sax\_exceptions.py
                                               
 63% 2175 - python27\tcl\tcl8.5\safe.tcl
                                        
 63% 2433 - python27\tcl\tcl8.5\tzdata\Asia\Dhaka
                                                 
 63% 2690 - python27\tcl\tcl8.5\tzdata\NZ-CHAT
                                              
 63% 2958 - python27\tcl\tix8.4.3\NoteBook.tcl
                                              
 63% 3233 - python27\Tools\Scripts\eptags.py
                                            
 64% 3299 - python27\DLLs\bz2.pyd
                                 
Everything is Ok

Script stderr:
 

Installiere Microsoft Visual C++ 2008 Redistributable
Installiere Microsoft Visual C++ 2008 Redistributable
Executing vcredist_x64.exe /q
Script exit code: 0

Script output:
 

Script stderr:
 

Node.js 10.17.0
Node.js 10.17.0
Executing nodepack.exe -o.\.. -y
Script exit code: 0

Script output:
 
7-Zip SFX 19.00 (x86) : Copyright (c) 1999-2018 Igor Pavlov : 2019-02-21

Extracting archive: C:\Program Files\iobroker\SmartHome2021\setup\nodepack.exe
--
Path = C:\Program Files\iobroker\SmartHome2021\setup\nodepack.exe
Type = 7z

  0%
    
  0% 554 - nodejs\node_modules\npm\node_mo . esolver\symlinked\_\node_modules
                                                                             
 49% 910
        
 99% 1030 - nodejs\node_modules\npm\html\doc\cli\npm-explore.html
                                                                 
 99% 1253 - nodejs\node_modules\npm\lib\utils\gunzip-maybe.js
                                                             
 99% 1483 - nodejs\node_modules\npm\node_modules\ansi-align\CHANGELOG.md
                                                                        
 99% 1703 - nodejs\node_modules\npm\node_modules\cacache\get.js
                                                               
 99% 1962 - nodejs\node_modules\npm\node_mo . node_modules\lru-cache\README.md
                                                                              
 99% 2232 - nodejs\node_modules\npm\node_mo . -promise\lib\es6-promise\asap.js
                                                                              
 99% 2488 - nodejs\node_modules\npm\node_modules\gauge\CHANGELOG.md
                                                                   
 99% 2757 - nodejs\node_modules\npm\node_modules\is-callable\.editorconfig
                                                                          
 99% 3036 - nodejs\node_modules\npm\node_modules\libnpm\packument.js
                                                                    
 99% 3315 - nodejs\node_modules\npm\node_modules\minimist\test\dash.js
                                                                      
 99% 3553 - nodejs\node_modules\npm\node_ . ata\lib\warning_messages.json
                                                                         
 99% 3821 - nodejs\node_modules\npm\node_modules\pacote\LICENSE
                                                               
 99% 4088 - nodejs\node_modules\npm\node_m . dules\minimist\test\kv_short.js
                                                                            
 99% 4354 - nodejs\node_modules\npm\node_m . javascript\associateExample.md
                                                                           
 99% 4625 - nodejs\node_modules\npm\node_modules\text-table\test\table.js
                                                                         
 99% 4891 - nodejs\node_modules\npm\node_modules\wrappy\README.md
                                                                 
 99% 5140 - nodejs\node_modules\npm\test\tap\hook.js
                                                    
 99% 5249 - nodejs\node_modules\npm\test\tap\prepublish-only.js
                                                               
Everything is Ok

Script stderr:
 

Konfiguriere Node.js 10.17.0
ioBroker Core Server
ioBroker Core Server
Executing iob.exe -o.\.. -y
Script exit code: 0

Script output:
 
7-Zip SFX 19.00 (x86) : Copyright (c) 1999-2018 Igor Pavlov : 2019-02-21

Extracting archive: C:\Program Files\iobroker\SmartHome2021\setup\iob.exe
--
Path = C:\Program Files\iobroker\SmartHome2021\setup\iob.exe
Type = 7z

  0%
    
  0% 584 - env\npm-cache\_cacache\content-v2\sha512\20\a9
                                                         
  0% 1177 - env\npm-cache\_cacache\content-v2\sha512\ac\2c
                                                          
  0% 1754 - env\npm-cache\_cacache\index-v5\1e\3e
                                                 
  0% 2366 - env\npm-cache\_cacache\index-v5\6e\f9
                                                 
  0% 2949 - env\npm-cache\_cacache\index-v5\b9\85
                                                 
  0% 3549 - env\npm\node_modules\node-gyp\node_modules\fast-deep-equal
                                                                      
  0% 4020 - node_modules\file-stream-rotator
                                            
  0% 4771 - node_modules\resolve\test\precedence\bbb
                                                    
 11% 5106
         
 25% 5106
         
 42% 5106
         
 62% 5106
         
 68% 5106
         
 73% 5106
         
 99% 5164 - env\npm-cache\_cacache\content- . bc21b8fab43e1bc4da7e8115ed1e7bab
                                                                              
 99% 5356 - env\npm-cache\_cacache\content- . d95a7f851f9956b1e8cc6732f3b6aa30
                                                                              
 99% 5608 - env\npm-cache\_cacache\content- . 51dced76e56eb6742ada43b1990db67
                                                                             
 99% 5862 - env\npm-cache\_cacache\content- . 65383ad312ae56778e4c0180cc75cf8
                                                                             
 99% 6121 - env\npm-cache\_cacache\content- . afd740019f5cf01a2358d000299c595
                                                                             
 99% 6386 - env\npm-cache\_cacache\index- . cb87c13cbde5b7c90861ef5c9f5fca
                                                                          
 99% 6674 - env\npm-cache\_cacache\index- . 211094b7c983b13e49f8734b58ead7
                                                                          
 99% 6855 - env\npm-cache\_cacache\index- . 36d6d9a1e212acacb2fd181595d819
                                                                          
 99% 7013 - env\npm-cache\_cacache\index- . 9aba4553a2d4b8600cb73bb94d52f5
                                                                          
 99% 7302 - env\npm-cache\_cacache\index- . f3ea94b758d0eaab38387680e535d4
                                                                          
 99% 7604 - env\npm-cache\_cacache\index- . 725a7a36d282e892cf4896009325db
                                                                          
 99% 7904 - env\npm-cache\_cacache\index- . 16cec77cead0842fc905ab810ea51f
                                                                          
 99% 8177 - env\npm\node_modules\node-gyp\node_modules\asn1\lib\ber\index.js
                                                                            
 99% 8442 - env\npm\node_modules\node-gyp\n . les\http-signature\lib\utils.js
                                                                             
 99% 8695 - env\npm\node_modules\node-gyp\node_modules\qs\.eslintrc
                                                                   
 99% 8952 - env\npm\node_modules\node-gyp\node_modules\util-deprecate\README.md
                                                                               
 99% 9245 - node_modules\ajv\lib\dot\multipleOf.jst
                                                   
 99% 9563 - node_modules\async\internal\queue.js
                                                
 99% 9846 - node_modules\busboy\test\test-types-multipart-stream-pause.js
                                                                         
 99% 9985 - node_modules\combined-stream\package.json
                                                     
 99% 10250 - node_modules\dicer\test\fixtures\many\part1.header
                                                               
 99% 10464 - node_modules\error-ex\index.js
                                           
 99% 10741 - node_modules\form-data\lib\form_data.js
                                                    
 99% 11038 - node_modules\iconv-lite\encodings\tables\cp950.json
                                                                
 99% 11289 - node_modules\iobroker.discovery\lib\adapters\fronius.js
                                                                    
 99% 11549 - node_modules\iobroker.info\docs\fr\img\link.png
                                                            
 99% 11822 - node_modules\iobroker.js-controller\lib\objects\lua\script.lua
                                                                           
 99% 12083 - node_modules\iobroker.js-cont . es\socket.io\lib\namespace.js
                                                                          
 99% 12316 - node_modules\is-descriptor\LICENSE
                                               
 99% 12589 - node_modules\le-acme-core\example\serve.js
                                                       
 99% 12856 - node_modules\lodash\findIndex.js
                                             
 99% 13182 - node_modules\lodash\fp\sortBy.js
                                             
 99% 13512 - node_modules\lodash\unzip.js
                                         
 99% 13845 - node_modules\logform\.travis.yml
                                             
 99% 14140 - node_modules\moment\locale\it-ch.js
                                                
 99% 14365 - node_modules\moment\src\locale\fr-ca.js
                                                    
 99% 14659 - node_modules\node-ssdp\.idea\workspace.xml
                                                       
 99% 14953 - node_modules\passport\lib\http\request.js
                                                      
 99% 15239 - node_modules\prompt\node_module . ules\colors\lib\maps\america.js
                                                                              
 99% 15513 - node_modules\request\node_modules\qs\.editorconfig
                                                               
 99% 15805 - node_modules\signal-exit\CHANGELOG.md
                                                  
 99% 16009 - node_modules\sshpk\lib\formats\pem.js
                                                  
 99% 16278 - node_modules\tweetnacl\.npmignore
                                              
 99% 16571 - node_modules\winston-transport\coverage\lcov-report\legacy.js.html
                                                                               
Everything is Ok

Script stderr:
 

Setting ioBroker language
Language de
[10:52:56] Installer Sprachcode: de
ioBroker Sprache gesetzt auf: de
ioBroker Währung gesetzt auf: €
Datenbankinstallation und Erstkonfiguration
Datenbankinstallation und Erstkonfiguration
Executing cmd.exe /C setup\setupfirst.cmd
Script exit code: 0

Script output:
 *** ioBroker bootstrap setup ***
*** Version: 2.1.0.b
*** Installdate: 17.01.2021 10:52:56,75


** Firewall rules
** There is no problem if the following commands generate errors.
** Now errors are relevant
OK.

OK.

OK.

OK.

** iobroker first init
** set admin port
New port for "admin.0" is: 8081
Instance settings for "admin.0" are changed.
** install service
2021-01-17 10:53:44,658 INFO  - Installing the service with id 'iobroker(SmartHome2021)'
Errorlevel: 0

Script stderr:
 

Service Sicherheit
Executing sc.exe config iobroker(SmartHome2021) obj= "NT SERVICE\iobroker(SmartHome2021)"
Script exit code: 0

Script output:
 [SC] ChangeServiceConfig ERFOLG

Script stderr:
 

Registrierung ioBroker Service
Executing iobroker.exe test
Script exit code: 0

Script output:
 2021-01-17 10:53:46,401 INFO  - Starting "C:\Program Files\iobroker\SmartHome2021\nodejs\node.exe" "C:\Program Files\iobroker\SmartHome2021\node_modules\iobroker.js-controller\controller.js"
2021-01-17 10:53:46,418 INFO  - Started process 9448
2021-01-17 10:53:47,440 INFO  - Stopping iobroker(SmartHome2021)
2021-01-17 10:53:47,443 INFO  - Stopping process 9448
2021-01-17 10:53:47,446 INFO  - Send SIGINT 9448
2021-01-17 10:53:49,710 INFO  - SIGINT to 9448 successful
2021-01-17 10:53:49,745 INFO  - Finished iobroker(SmartHome2021)

Script stderr:
 

Dateisystem Sicherheit
Dateisystem Sicherheit
Executing cmd.exe /C servicesec.cmd
Script exit code: 0

Script output:
 [SC] ChangeServiceConfig ERFOLG
i o b r o k e r ( S m a r t H o m e 2 0 2 1 )   :   n e w   a c e   f o r   n t   s e r v i c e \ i o b r o k e r ( s m a r t h o m e 2 0 2 1 ) 
 
 i o b r o k e r ( S m a r t H o m e 2 0 2 1 )   :   1   c h a n g e ( s ) 
 
 
 
 

Script stderr:
 

Starten des Dienstes
Executing iobroker.exe start
Script exit code: 0

Script output:
 2021-01-17 10:53:54,857 INFO  - Starting the service with id 'iobroker(SmartHome2021)'

Script stderr:
 

Warte auf Webadmin
Löschen temporärer Dateien
Löschen temporärer Dateien
Löschen temporärer Dateien
Stopping ioBroker service
Executing iobroker.exe stop
Script exit code: 0

Script output:
 2021-01-17 10:53:57,017 INFO  - Stopping the service with id 'iobroker(SmartHome2021)'

Script stderr:
 

Waiting for service to exit
Deleting iobroker-data
Copying new iobroker-data
Setting variable iobrokerjson_new from jq.exe .states.port=9000 "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\iobroker.json"
Script exit code: 0

Script output:
 {
  "system": {
    "memoryLimitMB": 0,
    "hostname": "DESKTOP-0JM9MHB(SmartHome)",
    "statisticsInterval": 15000,
    "statisticsIntervalComment": "Interval how often the counters for input/output in adapters and controller will be updated",
    "checkDiskInterval": 300000,
    "checkDiskIntervalComment": "Interval how often the disk size will be checked",
    "noChmod": false,
    "instanceStartInterval": 2000,
    "noChmodComment": "Flag to test new feature with no chmod call. Must be deleted later and noChmod must be mainline (2018.06.04)",
    "compact": false,
    "compactComment": "Controller will try to start the instances as a part of the same process. No spawn will be done. Only by adapters that support it and have flag compact flag in io-package.json",
    "allowShellCommands": false,
    "allowShellCommandsComment": "Allow execution of \"shell\" sendToHost commands"
  },
  "multihostService": {
    "enabled": false,
    "secure": true
  },
  "network": {
    "IPv4": true,
    "IPv6": true,
    "bindAddress": null
  },
  "objects": {
    "type": "file",
    "typeComment": "Possible values: 'file' - [port 9001], redis - [port 6379], couch - [port 5984].",
    "host": "127.0.0.1",
    "port": 9001,
    "user": "",
    "pass": "",
    "noFileCache": false,
    "connectTimeout": 2000,
    "options": {
      "auth_pass": null,
      "retry_max_delay": 5000
    },
    "backup": {
      "disabled": false,
      "files": 24,
      "filesComment": "Minimal number of backup files, after the deletion will be executed according to backupTime settings",
      "hours": 48,
      "hoursComment": "All backups older than 48 hours will be deleted. But only if the number of files is greater than of backupNumber",
      "period": 120,
      "periodComment": "by default backup every 2 hours. Time is in minutes. To disable backup set the value to 0",
      "path": "",
      "pathComment": "Absolute path to backup directory or empty to backup in data directory"
    }
  },
  "states": {
    "type": "file",
    "typeComment": "Possible values: 'file' - [port 9000], 'redis' - [port 6379].",
    "host": "127.0.0.1",
    "port": 9000,
    "maxQueue": 1000,
    "user": "",
    "pass": "",
    "connectTimeout": 2000,
    "options": {
      "auth_pass": null,
      "retry_max_delay": 5000
    },
    "backup": {
      "disabled": false,
      "files": 24,
      "filesComment": "Minimal number of backup files, after the deletion will be executed according to backupTime settings",
      "hours": 48,
      "hoursComment": "All backups older than 48 hours will be deleted. But only if the number of files is greater than of backupNumber",
      "period": 120,
      "periodComment": "by default backup every 2 hours. Time is in minutes. To disable backup set the value to 0",
      "path": "",
      "pathComment": "Absolute path to backup directory or empty to backup in data directory"
    }
  },
  "log": {
    "level": "info",
    "maxDays": 7,
    "noStdout": true,
    "transport": {
      "file1": {
        "type": "file",
        "enabled": true,
        "filename": "log/iobroker",
        "fileext": ".log",
        "maxSize": null,
        "maxFiles": null
      },
      "syslog1": {
        "type": "syslog",
        "enabled": false,
        "host": "localhost",
        "hostComment": "The host running syslogd, defaults to localhost.",
        "portComment": "The port on the host that syslog is running on, defaults to syslogd's default port(514/UDP).",
        "protocol": "udp4",
        "protocolComment": "The network protocol to log over (e.g. tcp4, udp4, unix, unix-connect, etc).",
        "pathComment": "The path to the syslog dgram socket (i.e. /dev/log or /var/run/syslog for OS X).",
        "facilityComment": "Syslog facility to use (Default: local0).",
        "localhost": "iobroker",
        "localhostComment": "Host to indicate that log messages are coming from (Default: localhost).",
        "sysLogTypeComment": "The type of the syslog protocol to use (Default: BSD).",
        "app_nameComment": "The name of the application (Default: process.title).",
        "eolComment": "The end of line character to be added to the end of the message (Default: Message without modifications)."
      }
    }
  },
  "dataDirComment": "Always relative to iobroker.js-controller/",
  "dataDir": "../../iobroker-data/"
}

Script stderr:
 

Setting variable iobrokerjson_new from jq.exe .objects.port=9001 "C:\Program Files\iobroker\Sicherung IObroker\iobroker-data\iobroker.json"
Script exit code: 0

Script output:
 {
  "system": {
    "memoryLimitMB": 0,
    "hostname": "DESKTOP-0JM9MHB(SmartHome)",
    "statisticsInterval": 15000,
    "statisticsIntervalComment": "Interval how often the counters for input/output in adapters and controller will be updated",
    "checkDiskInterval": 300000,
    "checkDiskIntervalComment": "Interval how often the disk size will be checked",
    "noChmod": false,
    "instanceStartInterval": 2000,
    "noChmodComment": "Flag to test new feature with no chmod call. Must be deleted later and noChmod must be mainline (2018.06.04)",
    "compact": false,
    "compactComment": "Controller will try to start the instances as a part of the same process. No spawn will be done. Only by adapters that support it and have flag compact flag in io-package.json",
    "allowShellCommands": false,
    "allowShellCommandsComment": "Allow execution of \"shell\" sendToHost commands"
  },
  "multihostService": {
    "enabled": false,
    "secure": true
  },
  "network": {
    "IPv4": true,
    "IPv6": true,
    "bindAddress": null
  },
  "objects": {
    "type": "file",
    "typeComment": "Possible values: 'file' - [port 9001], redis - [port 6379], couch - [port 5984].",
    "host": "127.0.0.1",
    "port": 9001,
    "user": "",
    "pass": "",
    "noFileCache": false,
    "connectTimeout": 2000,
    "options": {
      "auth_pass": null,
      "retry_max_delay": 5000
    },
    "backup": {
      "disabled": false,
      "files": 24,
      "filesComment": "Minimal number of backup files, after the deletion will be executed according to backupTime settings",
      "hours": 48,
      "hoursComment": "All backups older than 48 hours will be deleted. But only if the number of files is greater than of backupNumber",
      "period": 120,
      "periodComment": "by default backup every 2 hours. Time is in minutes. To disable backup set the value to 0",
      "path": "",
      "pathComment": "Absolute path to backup directory or empty to backup in data directory"
    }
  },
  "states": {
    "type": "file",
    "typeComment": "Possible values: 'file' - [port 9000], 'redis' - [port 6379].",
    "host": "127.0.0.1",
    "port": 9000,
    "maxQueue": 1000,
    "user": "",
    "pass": "",
    "connectTimeout": 2000,
    "options": {
      "auth_pass": null,
      "retry_max_delay": 5000
    },
    "backup": {
      "disabled": false,
      "files": 24,
      "filesComment": "Minimal number of backup files, after the deletion will be executed according to backupTime settings",
      "hours": 48,
      "hoursComment": "All backups older than 48 hours will be deleted. But only if the number of files is greater than of backupNumber",
      "period": 120,
      "periodComment": "by default backup every 2 hours. Time is in minutes. To disable backup set the value to 0",
      "path": "",
      "pathComment": "Absolute path to backup directory or empty to backup in data directory"
    }
  },
  "log": {
    "level": "info",
    "maxDays": 7,
    "noStdout": true,
    "transport": {
      "file1": {
        "type": "file",
        "enabled": true,
        "filename": "log/iobroker",
        "fileext": ".log",
        "maxSize": null,
        "maxFiles": null
      },
      "syslog1": {
        "type": "syslog",
        "enabled": false,
        "host": "localhost",
        "hostComment": "The host running syslogd, defaults to localhost.",
        "portComment": "The port on the host that syslog is running on, defaults to syslogd's default port(514/UDP).",
        "protocol": "udp4",
        "protocolComment": "The network protocol to log over (e.g. tcp4, udp4, unix, unix-connect, etc).",
        "pathComment": "The path to the syslog dgram socket (i.e. /dev/log or /var/run/syslog for OS X).",
        "facilityComment": "Syslog facility to use (Default: local0).",
        "localhost": "iobroker",
        "localhostComment": "Host to indicate that log messages are coming from (Default: localhost).",
        "sysLogTypeComment": "The type of the syslog protocol to use (Default: BSD).",
        "app_nameComment": "The name of the application (Default: process.title).",
        "eolComment": "The end of line character to be added to the end of the message (Default: Message without modifications)."
      }
    }
  },
  "dataDirComment": "Always relative to iobroker.js-controller/",
  "dataDir": "../../iobroker-data/"
}

Script stderr:
 

Change settings
Executing cmd.exe /c migrate.cmd
Script exit code: 0

Script output:
 

Script stderr:
 

Starten des Dienstes
Executing iobroker.exe start
Script exit code: 0

Script output:
 2021-01-17 10:54:22,760 INFO  - Starting the service with id 'iobroker(SmartHome2021)'

Script stderr:
 

Warte auf Webadmin
Löschen temporärer Dateien
Löschen temporärer Dateien
Löschen temporärer Dateien
Installation beendet
Log finished 01/17/2021 at 10:54:24
Launching http://localhost:8081

npm i iobroker.js-controller@stable --ignore-scripts

**********************************************************
***               Welcome to ioBroker.                 ***
***                                                    ***
***   Type 'iobroker help' for list of instructions.   ***
***                For more help see                   ***
***     https://github.com/ioBroker/ioBroker.docs      ***
**********************************************************

Your environment has been set up for using Node.js 10.17.0 (x64) and npm.


C:\Program Files\iobroker\SmartHome2021>iobroker stop
2021-01-17 10:56:42,374 INFO  - Stopping the service with id 'iobroker(SmartHome2021)'

C:\Program Files\iobroker\SmartHome2021>npm i iobroker.js-controller@stable --ignore-scripts
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@~2.3.1 (node_modules\chokidar\node_modules\fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@2.3.1: wanted {"os":"darwin","arch":"any"} (current: {"os":"win32","arch":"x64"})

+ iobroker.js-controller@3.1.6
added 39 packages from 59 contributors, removed 408 packages, updated 66 packages, moved 6 packages and audited 646 packages in 18.958s
found 41 vulnerabilities (33 low, 1 moderate, 7 high)
  run `npm audit fix` to fix them, or `npm audit` for details

C:\Program Files\iobroker\SmartHome2021>iobroker start
2021-01-17 10:57:40,571 INFO  - Starting the service with id 'iobroker(SmartHome2021)'

C:\Program Files\iobroker\SmartHome2021>

[Kitz252]

@kitz252
Nun scheint sich was zu tun. Ich erkenne zwar keinen Installationsprozess aber alle paar minuten erscheint ein adapter mehr.
Werde mal abwarten was passiert.

Vielen Dank für eure hilfe.

[sigi234]

@kitz252 said in iobroker läuft nicht mehr nach Win10 update:

@kitz252
Nun scheint sich was zu tun. Ich erkenne zwar keinen Installationsprozess aber alle paar minuten erscheint ein adapter mehr.
Werde mal abwarten was passiert.

Vielen Dank für eure hilfe.

Jupp, kann SEHR lange dauern!

[Kitz252]

Nun läuft wieder das meiste. Bei dem Ordner den ich nach dem Win update gesichert habe stimmt aber etwas nicht, da werden keine Instanzen,... angezeigt. Obwohl die Ordnerstruckturen vorhanden sind. Bei dem Ordner den ich vor ca. einem Monat gesichert habe funktioniert aber alles.

Danke