Conbee II - BLE funktionier nicht

Moe Ven

Benutze pi 3B+
BLE ist dementsprechend integriert
Raspberry Pi OS Lite

Thomas Braun

@Moe-Ven
Vermutlich greifen die beide auf die gleichen devices zu.

dmesg | grep tty
hciconfig

Moe Ven

@Thomas-Braun Hmm, das wäre aber echt komisch

dmesg | grep tty
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835                                                                                                                                                             .enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1                                                                                                                                                              bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_ba                                                                                                                                                             se=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root                                                                                                                                                             =PARTUUID=00ab5a78-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000868] printk: console [tty1] enabled
[    2.511459] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud                                                                                                                                                              = 0) is a PL011 rev2
[    6.821183] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device
[    7.612105] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device

Bei hciconfig passiert nichts

Thomas Braun

@Moe-Ven

service bluetooth status

bzw. start dann mit

sudo systemctl start bluetooth

Moe Ven

@Thomas-Braun said in Conbee II - BLE funktionier nicht:

sudo systemctl start bluetooth

$ service bluetooth status
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: inactive (dead)
     Docs: man:bluetoothd(8)

nach dem starten:

 service bluetooth status
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: active (running) since Sun 2020-10-11 13:59:16 CEST; 4s ago
     Docs: man:bluetoothd(8)
 Main PID: 7309 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 2065)
   CGroup: /system.slice/bluetooth.service
           └─7309 /usr/lib/bluetooth/bluetoothd

Okt 11 13:59:16 raspberrypi systemd[1]: Starting Bluetooth service...
Okt 11 13:59:16 raspberrypi bluetoothd[7309]: Bluetooth daemon 5.50
Okt 11 13:59:16 raspberrypi systemd[1]: Started Bluetooth service.
Okt 11 13:59:16 raspberrypi bluetoothd[7309]: Starting SDP server
Okt 11 13:59:16 raspberrypi bluetoothd[7309]: Bluetooth management interface 1.14 initialized

Hat aber leider nicht geholfen:

lsusb
Bus 001 Device 006: ID 1cf1:0030 Dresden Elektronik
Bus 001 Device 005: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Thomas Braun

@Moe-Ven

hciconfig

Moe Ven

@Thomas-Braun said in Conbee II - BLE funktionier nicht:

hciconfig

Da passiert leider immer noch nichts :/

Thomas Braun

@Moe-Ven
Der service läuft aber noch?

service bluetooth status

Moe Ven

@Thomas-Braun said in Conbee II - BLE funktionier nicht:

service bluetooth status

ja

service bluetooth status
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: active (running) since Sun 2020-10-11 13:59:16 CEST; 11min ago
     Docs: man:bluetoothd(8)
 Main PID: 7309 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 2065)
   CGroup: /system.slice/bluetooth.service
           └─7309 /usr/lib/bluetooth/bluetoothd

Okt 11 13:59:16 raspberrypi systemd[1]: Starting Bluetooth service...
Okt 11 13:59:16 raspberrypi bluetoothd[7309]: Bluetooth daemon 5.50
Okt 11 13:59:16 raspberrypi systemd[1]: Started Bluetooth service.
Okt 11 13:59:16 raspberrypi bluetoothd[7309]: Starting SDP server
Okt 11 13:59:16 raspberrypi bluetoothd[7309]: Bluetooth management interface 1.14 initialized

Thomas Braun

@Moe-Ven
System auf Stand?

sudo apt update
sudo apt dist-upgrade
sudo reboot

Moe Ven

@Thomas-Braun said in Conbee II - BLE funktionier nicht:

sudo apt dist-upgrade

Jap

sudo apt update
Holen:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15,0 kB]
OK:2 http://archive.raspberrypi.org/debian buster InRelease
OK:3 https://phoscon.de/apt/deconz buster InRelease
OK:4 https://deb.nodesource.com/node_10.x buster InRelease
Es wurden 15,0 kB in 2 s geholt (8.413 B/s).
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Alle Pakete sind aktuell.

sudo apt dist-upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Paketaktualisierung (Upgrade) wird berechnet... Fertig
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

Thomas Braun

@Moe-Ven sagte in Conbee II - BLE funktionier nicht:

node_10.x

Würde ich allerdings auf node12 heben.

Moe Ven

@Thomas-Braun

Okay, kannst du mir kurz sagen wie ich das mache?

Moe Ven

@Moe-Ven Okay, schon gefunden.

bin wie folgt vorgegangen:
https://computingforgeeks.com/how-to-install-nodejs-on-ubuntu-debian-linux-mint/

Moe Ven

@Thomas-Braun Bekomme allerdings jetzt nach dem reboot service bluetooth status
nicht mehr gestartet:

sudo systemctl start bluetooth

dann

service bluetooth status
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset
   Active: inactive (dead)
     Docs: man:bluetoothd(8)

Okt 11 14:25:39 raspberrypi systemd[1]: Condition check resulted in Bluetooth se
Okt 11 14:25:55 raspberrypi systemd[1]: Condition check resulted in Bluetooth se
Okt 11 14:26:52 raspberrypi systemd[1]: Condition check resulted in Bluetooth se
log file: udo systemctl start bluetooth

Thomas Braun

@Moe-Ven
Zu viel Overhead.
Mach es künftig danach:
https://forum.iobroker.net/topic/35090/howto-nodejs-installation-und-upgrades-unter-debian

Moe Ven

@Thomas-Braun Okay, mache ich danke.

Nach 10 versuche bekomme ich dann doch

service bluetooth status
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
   Active: active (running) since Sun 2020-10-11 14:28:59 CEST; 2s ago
     Docs: man:bluetoothd(8)
 Main PID: 4393 (bluetoothd)
   Status: "Running"
    Tasks: 1 (limit: 2065)
   CGroup: /system.slice/bluetooth.service
           └─4393 /usr/lib/bluetooth/bluetoothd

Okt 11 14:28:59 raspberrypi systemd[1]: Starting Bluetooth service...
Okt 11 14:28:59 raspberrypi bluetoothd[4393]: Bluetooth daemon 5.50
Okt 11 14:28:59 raspberrypi systemd[1]: Started Bluetooth service.
Okt 11 14:28:59 raspberrypi bluetoothd[4393]: Starting SDP server
Okt 11 14:28:59 raspberrypi bluetoothd[4393]: Bluetooth management interface 1.14 initialized

Moe Ven

@Moe-Ven Ändert aber leider nichts

Thomas Braun

@Moe-Ven

apt policy pi-bluetooth

Moe Ven

@Thomas-Braun said in Conbee II - BLE funktionier nicht:

apt policy pi-bluetooth

apt policy pi-bluetooth
pi-bluetooth:
  Installiert:           0.1.15
  Installationskandidat: 0.1.15
  Versionstabelle:
 *** 0.1.15 500
        500 http://archive.raspberrypi.org/debian buster/main armhf Packages
        100 /var/lib/dpkg/status

Community Forum

NEWS

Conbee II - BLE funktionier nicht

Support us

516

32.8k

82.7k

1.3m